Servomex ES Q2 2013

Let It FlowOXYGEN ANALYSIS FOR PCB REFLOW

OVENS

p8

A Brilliant Recovery

EXTRACT MORE ARGON FROM

YOUR ASUp1

0

REVOLUTIONIS HERESERVOTOUGH SpectraScan is the future of on linehydrocarbon gas analysis

Read ES onlineat servomex.com/

ESmagazine

The

INCORPORATING THE SERVOMEX

GUIDE2013

S E R V O M E X N E W SQ2 2013

Every percent counts, and the SERVOPRO Chroma can help you increase argon production yields by up to 3%. Think how much more revenue that could create for your business.

EXTRACT MORE PROFITSERVOPRO CHROMA INCREASES ARGON EXTRACTION BY UP TO 3%

MEASURABLY SUPERIORREVOLUTIONARY TCD TECHNOLOGY DELIVERS CLASS-LEADING ASU GAS ANALYSIS

IN THE ASU PROCESS, THE MORE ARGON YOU EXTRACT, THE MORE PROFIT YOU MAKE.

FIND OUT HOW YOU COULD BOOST EFFICIENCY, PRODUCTIVITY & PROFIT: DOWNLOAD THE WHITE PAPER FROM:

SERVOMEX.COM/CHROMA OR TO REQUEST ONE, EMAIL: [email protected]

SEE HOW TCD TRANSFORMS YOUR ASU MEASUREMENTS: DOWNLOAD THE WHITE PAPER FROM:

SERVOMEX.COM/MULTIEXACT OR TO REQUEST ONE, EMAIL: [email protected]

AIM HIGHERHIT YOUR FURNACE COMBUSTION TARGETS WITH THE SERVOTOUGH LaserSP

FIND OUT HOW YOU COULD IMPROVE THE EFFICIENCY OF ETHYLENE PRODUCTIONDOWNLOAD THE WHITE PAPER FROM:

SERVOMEX.COM/LASERSP OR TO REQUEST ONE, EMAIL: [email protected]

With fast response TDL technology that monitors closer to the burn, the SERVOTOUGH LaserSP’s unique flue gas analysis solution reduces fuels costs and CO2 emissions. You can’t get a faster response.

EFFECTIVE COMBUSTION CONTROL IS CRITICAL TO EFFICIENT ETHYLENE PRODUCTION.

A revolution in measurement speed and accuracy, the SERVOTOUGH SpectraScan gives you real-time readings for light hydrocarbons C1-C5+.

MOVE OVER GCTHE FUTURE OF ON LINE GAS ANALYSIS IS HERE.

LEARN MORE ABOUT THE REVOLUTION IN HYDROCARBON GAS ANALYSIS: DOWNLOAD THE WHITE PAPER FROM:

SERVOMEX.COM/SPECTRASCAN OR TO REQUEST ONE, EMAIL: [email protected]

Augmented by argon, nitrogen and helium measurements utilising Servomex’s revolutionary TruRef TCD technology, the MultiExact multigas analyser transforms ASU product quality while reducing cost-of-ownership.

THE QUALITY OF YOUR ASU PRODUCT DEPENDS ON THE QUALITY OF YOUR GAS ANALYSIS.

SINGLE MEASUREMENT

MONOEXACT ALSO AVAILABLE

A MEASURABLE ADVANTAGES E R V O M E X . C O M

Need ANALYSER ADVICE?

Contact your local business centre or visit www.servomex.com

The New SERVOTOUGH SpectraScan

Welcome to Expert Solutions

THE SERVOMEX PRODUCT MAGAZINE

3

ES is published quarterly by Servomex Group Limited, Jarvis Brook, Crowborough, East Sussex, TN6 3FBEditorial enquiries and feedback should be sent to Colin Jones, Marketing Communications Director.

Email: [email protected] @servomex linkedin.com/servomex

ES IS THE QUARTERLY PRODUCT MAGAZINE FROM SERVOMEX, HIGHLIGHTING THE PRODUCTS AND TECHNOLOGY HELPING CUSTOMER APPLICATIONS AROUND THE WORLD.

IN THIS ISSUE...

SEE OUR NEW SERVOMEX SERVICE NETWORK PRODUCT RANGE ON PAGE 18

p112013

WANT TO VIEW OUR

PRODUCTS ONLINE?

Visitwww.servomex.com

Product Focus: SERVOPRO ChromaServomex’s trace gas analyser helps recover more crude argon

p6

Global News UpdateThe latest news on Servomex products and people

p4

Product Focus: DF-150EControlling oxygen levels in reflow ovens

p8

Product Focus: SERVOTOUGH LaserSPMaximising combustion efficiency in ethylene furnaces

p9

Technology Focus: CoulometricThe science behind our solid state coulometric sensors

p10

Our new online gas analyser in a breakthrough in the analysis of light hydrocarbons

SpectraScanSERVOTOUGH

FIND OUT MORE: ON P 7

S E R V O M E X N E W S

Q2 2013

After continuing to service many discontinued analysers beyond their designated life span, the obsolescence of key components means Servomex no longer provide support to the following products:

The tests, conducted by Dr Hisashi Abe between December 2012 and January 2013, passed varying levels of trace moisture in nitrogen through the DF-749.

Throughout the tests, the DF-749 showed exceptional reliability and accuracy, validating the DF-749 as a gas analyser ideal for measuring low moisture concentrations.

Part of the industry-leading DF-700 series, the DF-749 is suitable for a number of specialised applications, including monitoring of moisture behaviour in ultra-high purity gas distribution systems used in semiconductor fabrication, as well as detection of moisture in ammonia gas, which can degrade LED device performance.

As these analysers now greatly exceed their designated operational lifetime, Servomex recommends customers avoid potential operational problems by upgrading these analysers as soon as possible.

For 1100 users, we recommend the capabilities of the award winning SERVOTOUGH Oxy digital oxygen analyser and SERVOTOUGH OxyExact process oxygen analyser. 700 users will benefit from the advanced functionality of the SERVOTOUGH FluegasExact.

TIME TO UPGRADE DF-749 PASSES TRACE MOISTURE ANALYSIS TEST

Servomex offers a range of training courses designed to meet the complete scope of individual analyser operations, ranging from simple functionality overviews to complex operational procedures.

Run over two days at Servomex’s global business centres, our classroom-based courses include training on the measurement technology, analyser operation and detailed installation, diagnostic and servicing procedures. Run by Servomex’s fully qualified engineers, these sessions are supported with hands-on training where attendees gain valuable practical experience.

2013 training courses focus on key analyser applications, with course created for SERVOPRO Chroma (k4000) / MultiExact (5400), SERVOPRO Plasma (k2000) / Chroma (k4000), DF analysers, SERVOTOUGH Laser (2900) series and the SERVOTOUGH OxyExact (2200) / SpectraExact (2500).

REGIONAL ANALYSER TRAINING COURSES AVAILABLE FOR 2013

Book your training todayemail Peter Gumm at [email protected]

• Servomex1100• Servomex540• Servomex700B• Servomex700Ex

The Servomex DF-749 has been proven as an accurate and reliable analyser for trace moisture measurements in tests by Japan’s National Institute of Advanced Industrial Science and Technology (AIST)

CHOOSETHE DF-749 FOR

TRACE MOISTURE ANALYSIS

Contact your local business centre

TODAY

NEWS UpdateGLOBAL

UPGRADE YOUR ANALYSER

TODAY Contact your local

business centre

SERVOMEX SERVICE NETWORK DELIVERS A COMPLETE PACKAGE OF SUPPORT

CONTACT YOUR LOCAL BUSINESS CENTRE TODAY4

Hummingbird Sensing Technology has announced the appointment of Dominic Corsale as General Manager. Succeeding former Business Manager Martin Cox, who has assumed the role of General Manager, Americas, Dominic brings to Hummingbird a wealth of experience gained through 35 years pioneering medical sensing technologies.

His achievements include the development of respiratory gas measurement products that significantly reduce patient risk, the development of the SARA multiplex mass spectrometer system and the founding of Marquette Gas Analysis. Having helped establish multi-gas monitoring within operating

For a gas chromatograph to perform reliably with high levels of sensitivity, the supplied carrier gas must be of the highest quality. With UHP gases expensive to bottle and difficult to trans-fill without contamination, the new SERVOPRO PureGas enables users to purify gases onsite at the point of use, minimising the risk of gas contamination.

Available for argon and helium matrices, the PureGas purifier delivers outlet impurity levels for O2, H2O, CO, CO2, H2, CH4 and N2. Able to purify from Grade 5.0 - in which the level of impurity will not exceed 10 ppm - the PureGas offers Grade 7.0 UHP gas purities suitable for a GC carrier gas.

theatres, Dominic has been instrumental in expanding CO2 monitoring outside the surgical environment to include use in resuscitation and medical transport.

A standard 1/8” Swagelok compression fitting returns contamination levels less than 20 parts per billion (ppb), while optional high purity 1/8” vacuum coupling radiation (VCR) fittings for the feed gas inlet and purified gas outlet return ultra-low levels less than one ppb. Both fittings feature a 20 micrometre (0.02mm) filter.

KEY APPOINTMENTS FOR GC PRODUCTS & HUMMINGBIRD

NEW SERVOPRO PUREGAS ENSURES EXCEPTIONAL CARRIER GAS QUALITY

Contact Dominic direct [email protected]

A cornerstone activity designed to help Servomex understand the voice of the customer, our User Advisory Council meetings engage with expert regional representatives to improve our understanding of process analyser and system solutions.

Taking place in Suzhou, nr. Shanghai, in April, twelve leading representatives from Chinese industries met senior representatives from Servomex to discuss the issues they face. Among key topics discussed were methods of improving measurement availability and developing best practice on sample system solutions. Dedicated sessions were also held on combustion analysers and photometric technology.

Representatives attending included Mr Linzhong Yang (Shanghai Petrochemical), Mr Feng Gao (China Petro Funshun Petrochemical), Mr Yiming Zhou (Shanghai Chem Engineering) and Ms Ping Jiang (China Kunlun Engineering Co.).

The meeting was considered to be a success by all and Servomex thanks all attendees for their time and input.

SUCCESSFIRST CHINA UAC MEETING A

Zarina Stanley (Global Market Manager, Servomex) & Ping Jiang (China Kunlun Engineering Co.)

We believe with Dawei’s strong experience he will enable Servomex to grow our business rapidly.

Contact Dawei direct [email protected]

Frank Zhu, General Manager, Asia Pacific

CONTACT YOUR LOCAL BUSINESS CENTRE TODAY

Servomex has appointed Dawei Zhang to the role of Product Manager Trace GC, Plasma and FID Products (formerly KA), as well as IG Market Manager for the Asia Pacific Region.

Responsible for marketing key products including the SERVOPRO Chroma, SERVOPRO Plasma and SERVOPRO FID, Dawei will work closely with the engineering and applications teams based in Servomex’s Technical Centre in Crowborough. Dawei will also

take responsibility for managing Servomex’s growing presence in Industrial Gas production in Asia.

SERVOPRO analysersChroma

NOW PROVEN IN TRIALS TO RECOVER SIGNIFICANTLY HIGH ARGON (Ar) YIELDS, THE SERVOPRO CHROMA FROM SERVOMEX MEASURABLY IMPROVES PRODUCTIVITY AND PROFITABILITY IN A RANGE OF Ar PRODUCING APPLICATIONS.

Produced in relatively minor quantities as part of the air separation process, any improvements in the quantity of Ar recovered in ASU processes can significantly boost profits – with even single percentage increases in yield potentially boosting revenues by hundreds of thousands of dollars annually.

OTHER CHROMA APPLICATIONS Air separation plants; Cryogenic transportation; Hydrogen purification plants; Speciality gas laboratories; Semiconductor plants; Helium liquification plants.

carrier gas to function, reducing operating costs.

The Chroma master chassis controls a range of detectors and columns for data recording in real-time, working as an independent analyser with each peak reported on screen with a process value in ppm or ppb. This instant data stream from the Ar column enables specific, individual adjustments to be made to optimise Ar recovery from the process.

A compact instrument with minimal footprint and installation costs, the Chroma’s easy to use interface gives full access to all functions, measurements and system

The SERVOPRO Chroma uses advanced gas chromatograph (GC) technology for measurements that enable a complete evaluation of the efficiency of the air separation process. Usually employed to measure impurities in bulk gases, the Chroma can be configured for the sub ppm analysis of Nitrogen (N2) in crude Ar (typically 90 per cent oxygen, balance Ar and N2) – a measurement that cannot be obtained by trace N2 in Ar analysers, or by thermal conductivity detectors which cannot return the low level sensitivity required for the measurement. Together, Servomex’s unique patented combination of plasma emission detector and dopant injection technology provides an extremely stable N2 measurement - and requires only an argon

status. With the onboard computer removing the requirement for external computer control, the simple and intuitive user interface enables improvements to be implemented quickly and easily.

In trials, where Ar was produced in cryogenic liquid from the onsite ASU, the Chroma sample system was set up in different parts of the process so that it returned multiple data readings from across the process. Analysis of those results enabled adjustments to be made that returned up to three percent increases in Ar recovery, dependent on the operations and type of plant involved.

Gas Chromatography

Plasma DOWNLOADTHE WHITE PAPER:

SERVOMEX.COM/CHROMA

We conducted a number of trials throughout the US during 2012, all of which conclusively showed the capability of the Chroma to optimise argon recovery. Not only are the considerable benefits for ASU production apparent from these trials, but the success of this application underlines the exceptional flexibility of the SERVOPRO Chroma as a leading trace gas analyser. Dawei Zhang, Products Business Manager, Servomex

6

SERVOPRO CHROMATRACE GAS ANALYSER RECOVERS MORE CRUDE ARGON FROM ASU PROCESSES EXTRACT

MORE PROFIT

FROM YOUR ASU

Contact your local

business centre TODAY

NEED A COMPLETE SYSTEMS SOLUTION FOR GAS ANALYSIS? WE HAVE THE ANSWER

Contact Dawei direct [email protected]

Q2 2013

SERVOTOUGH analysersSpectraScan

Q2 2013

A real time optical analyser utilising the Precisive field proven optical bench, the SpectraScan offers a breakthrough capability in the continuous analysis of light hydrocarbons C1-C5+. With an innovative measurement technology using NIR/IR absorption spectroscopy with state of the art spectral scanning coupled with chemometric based data processing, the SpectraScan delivers exceptionally high accuracy, low cross sensitivity and a very fast speed of response.

A flow-through cell utilises a patented spectrometer design for a high quality optical measurement, resulting in a high signal-to-noise ratio which gives a highly

stable and accurate measurement. No separation columns and valves are required.

Hydrocarbon infra-red spectra are broad, with the wavelength of different elements heavily overlapping. The SpectraScan achieves a precise separation into constituent components by utilising an advanced Tunable Filter Spectroscopy Analysis Algorithm.

Optimised with cross interference modeling, spectral non-linearity compensation and peak shifting compensation, this breakthrough Chemometric algorithm delivers industry-leading interference compensation with a permanent span calibration, low cross-interference (< 0.2%), high baseline stability and a linear response throughout the scanning range.

Wavelength scanning is achieved by custom designed tunable band-pass filter, with a unique design that enables simultaneous

scanning of selected wavelength bands for gases including Methane, Ethane, Propane, iso-Butane, n-Butane, Propylene and Ethylene.

The SpectraScan also delivers a range of auxiliary cost and operating benefits. Manufactured to a robust and reliable design, the instrument’s optimised design produces very low zero and span drift, with minimal validation times.

A fixed hardware configuration means maintenance costs are low, while the infra-red technique requires no carrier gas and consequently has minimal installation infrastructure requirements.

The SpectraScan is available in two configurations: a 19” rack mounted general purpose unit and a wall mounted safe area version certified to CSA CL1 Div2 and ATEX Zone 2.

Gas Filter Correlation Infra-Red

The SpectraScan is nothing less than a leap forward in hydrocarbon gas analysis – the ‘next generation’ technology for the HP industry and the technology by which other techniques will now be benchmarked.Sam Langridge, Product Manager, Servomex

DOWNLOADTHE WHITE PAPER:

SERVOMEX.COM/SPECTRASCAN

SERVOTOUGH spectrascan

SERVOPRO CHROMA

NEW

REDEFINES LIGHT HYDROCARBON GAS ANALYSIS FOR THE HP INDUSTRY

SERVOMEX HAS ANNOUNCED A BREAKTHROUGH IN LIGHT HYDROCARBON GAS ANALYSIS WITH THE LAUNCH OF THE NEW SERVOTOUGH SPECTRASCAN. A FASTER, LESS COMPLEX TECHNOLOGY THAN GAS CHROMATOGRAPH TECHNIQUES TRADITIONALLY USED IN LIGHT HYDROCARBON APPLICATIONS, THE SPECTRASCAN IS A GAME-CHANGER IN GAS ANALYSIS.

THE NEW REPLACEMENTFOR GC ? find out from your local business centre TODAY

CONTACT SERVOMEX SYSTEMS THROUGH YOUR LOCAL BUSINESS CENTRE

Contact Sam direct [email protected]

DF analysersDF150E

Q2 2013

OTHERDF-100SERIESAPPLICATIONS: Inert gas welding; heat treatment; headspace monitoring; glovebox monitoring; process control.

The flexibility of the DF-150E means it can be easily integrated into multi point zone sample systems using a manual or automatic sequencing system. This makes it ideal for OEM furnace manufacturers who supply analysers for the end-user, heat treatment contractors and on-site or laboratory processes providing treatment for end products in-house. Regis Loubatiere, Trace Product Manager, Servomex

SERVOMEX DF-150E OXYGEN ANALYSER

GUARANTEES BATCH QUALITY FOR REFLOW OVENS


SERVOMEX.COM/DF150ECoulometric

MAKE YOUR

NEXT SENSOR

CHANGE

YOUR LAST

Contact your local


With its unique coulometric sensor technology, the DF-150E from Servomex delivers exceptionally accurate Oxygen (O2 ) analysis in a range of reflow applications processes. The DF-150E ensures batch quality and significantly improves plant efficiency.

when using N2 or mixtures using N2 as a blanketing gas.

The coulometric technology enables the O2 sensor to cope with short time exposure to ambient air, with options for temporarily disabling the sensor to enable longer exposure to ambient air - a capability not possible with traditional electrochemical sensors, where extended exposure to air quickly damages the cell.

The DF-150E is factory calibrated and reduces cost of maintenance with a five-year sensor warranty that requires only an annual SPAN calibration and no programmed cell replacement. With just a single

An extremely versatile unit, the DF-150E can be configured to operate as a single or three-range analyser to meet specific needs and is accurate to ±3% of reading / 0.5% of measurement range, making it highly suitable to control O2 levels in surface mount soldering operations in reflow PCB ovens, which must be O2-free if the soldered joint is to be permanently sealed.

Heat is transferred to the assemblies by radiation using Nitrogen (N2) to establish an O2-free environment to minimise oxidisation of surfaces to be soldered. The DF-150E uses non-depleting coulometric E-sensor technology to ensure accuracy with no sensor drifting and no false low readings, protecting against oxidisation. This no fail performance is crucial as a false O2 reading can waste thousands of dollars in scrapped final product, schedule disruption or cause safety issues

instrument calibration per year, the reduced maintenance costs and its peerless stability have found favour with furnace manufacturers, quality product managers, process engineers and product development engineers alike.

The DF-150E offers users a range of configuration options that enables the analyser to be built to their particular measurement requirements. Choices include CE Certification, a choice of Outputs, Flow Alarm, Sample Pump and Remote Sensor options. A unique acid gas sensor option also neutralises trace levels of acid gases in the sample.

8 ENSURE YOUR SERVOPRO CHROMA PERFORMS AT OPTIMUM LEVELS OUT OF THE BOX

ASK ABOUT OUR COMMISSIONING PACKAGES

Contact Regis direct [email protected]

OTHERLASERAPPLICATIONS:Emission control systems; Combustion control systems; Ammonia slippage control; Safety systems in chemical plants; Trace measurements in pure gases; Moisture measurement in natural gas.

SERVOTOUGH analysersLaserSP

Q2 2013

From reduced emissions and lower fuel costs to vastly improved response and reliability, the advanced technology of the SERVOTOUGH LaserSP delivers ethylene manufacturers overwhelming cost, process and safety benefits.Roger Highton, Product Business Manager, Servomex

MAXIMISES COMBUSTION EFFICIENCY IN ETHYLENE FURNACES


SERVOMEX.COM/LASERSP

AIM HIGHER WITH

THE LASERSP

Contact your local


SERVOTOUGH LaserSPMONITOR

The SERVOTOUGH LaserSP TDL gas analyser from Servomex has been proven to deliver an optimum combustion control solution for ethylene cracker furnaces.

The key to combustion efficiency is minimising excessive air in the combustion chamber, a process which requires fast speed of response when monitoring the flue oxygen concentration at close to the optimum level and for the detection of carbon monoxide in the flue gas. The LaserSP, a high performance combustion monitor which utilises the latest tunable diode laser (TDL) technology, combines a response time of less than two seconds with an in-situ measurement location that eliminates any sample system delays.

The ability to measure these gases at up to 1500°C allows the LaserSP to be located close to the furnace burner, delivering

the fastest possible speed of response. Additionally, the TDL analysis technique offers a representative path-averaged measurement of process gas concentrations with a sensitivity that enables it to highlight faults: for example, problems with a single burner jet can be detected by the LaserSP, even in furnaces where more than 100 burners may be present.

When utilised for a typical measurement of 0-10% O2 and 0-1000ppm CO respectively, the LaserSP delivers a flue gas analysis solution that enables optimisation of the combustion control process, improving process efficiency by lowering fuel consumption and reducing carbon dioxide emissions. Offering highly stable performance and minimum sample conditioning requirements with no moving parts and consumables, the LaserSP also minimises maintenance costs. With the accurate and reliable measurement delivered through a rugged and reliable Servomex design, the LaserSP is the best solution for in-situ measurements in the extreme and

harsh environments of an ethylene furnace.

Servomex’s advanced technology also enables additional cost and process control benefits. In traditional TDL in-situ installations, it is common practise to flow a dry N2 purge gas over the windows of analysers to protect the optics. Instrument air is not used as the oxygen content would interfere with the O2 combustion chamber measurement. The infra-red scan range of the LaserSP enables the inclusion of additional absorption lines which only appear at greater than 600°C. By using one of these “hot lines” to monitor the process O2, it is possible to use instrument air as the window purge gas without any interference to the measurement. The standard “cold” O2 absorption line is monitored and the signal utilised for the purpose of checking the LaserSP’s response to a test gas, and to provide an alarm in the event of an interruption of the flow of window purge gas. The LaserSP monitor with air purge typically saves $5000pa (Euro4000pa) compared to a traditional TDL with nitrogen purge.

ASK ABOUT OUR COMMISSIONING PACKAGES

Contact Roger direct [email protected]

Tunable Diode Laser Spectroscopy

Coulometric

Q2 2013

A coulometric sensor is a technology that operates on a similar principle to an electrochemical sensor. The flow of electrons, or current, from an electrochemical reaction is measured directly to provide the oxygen concentration in a sample gas.

In coulometric sensing, the quantity of electrons that flows through the circuit between the cathode and anode is proportional to the concentration of oxygen in the sample gas. By counting the number of electrons flowing through its circuit, this flow of electrons is measured by the analyser electronics and the oxygen concentration is displayed.

The circuit is connected between the sensor’s cathode electrode and its anode electrode, with a polarizing DC voltage used to facilitate the flow of electrons. Oxygen from the sample gas gets to the cathode electrode by diffusing through a very small hole in a barrier

covering the cathode. Oxygen molecules in contact with the cathode are reduced according to the following electrochemical reaction. The oxygen ions, O2 -, are attracted though a solid electrolyte that is heated to 400°C and converted back to molecular oxygen at the anode electrode.

As an oxygen sensing technology, coulometric sensing is well suited for applications that require accuracy above one ppm at ppm and/or percent level. Coulometric sensors respond very quickly to changing oxygen concentrations, with a sensor exposed to air being able to measure <10ppm for pure nitrogen within one minute. This makes the sensor attractive for users who have upset prone applications and need to make ppm-level measurements.

The solid state nature of the technology provides a range of operational advantages. As coulometric sensors are not consumed when exposed to oxygen, they avoid the requirement for constant purge to protect the sensor when the analyser is not being used; the sensor’s lifetime is also not dependant on how

DELTA-F

DF-300Series

The DF-300 series is Delta F’s full-featured, microprocessor-based line, offering customers superior value and performance.Offering highly accurate measurements, flexible range control and fast response time, the DF-300 series provides extensive background gas compatibility and flexible configuration options. Typical applications include usage in high purity gas production control and monitoring, specialty gas quality control, inert process monitoring, petrochemical production, R&D and electronics.

Coulometric sensors explained

To find out more about

THE DF OXYGEN & MOISTURE

ANALYSERContact your local


DELTA-F

KEY ANALYSIS

Coulometric

DF-100Series

The DF-100 series is a general purpose industrial analyser delivering reliable oxygen measurement at percent and trace levels. Based around the DF-150E base model, several versions are available including the DF-140E, a NEMA 4-compliant water/dust tight version for outdoor environments, and the DF-130E low-cost version with a basic range of options. A DF-110 version is available for OEM manufacturers, while the DF-150 can be built to customer specifications.

10 NEED A COMPLETE SYSTEMS SOLUTION FOR GAS ANALYSIS? WE HAVE THE ANSWER

Coulometric

much oxygen it is exposed to. In addition to being fast to respond to changing sample gas concentrations, the performance of the sensor is not affected by reasonable changes in flow rate.

The sample gas is not humidified or altered in any way after it passes through a coulometric sensor, making it advantageous for users wishing to make in-situ measurements or who wish to recycle sample gas from a “flow-through” analyser exhaust back into the process. Coulometric sensors also require no periodic electrolyte maintenance or a reference gas to support the measurement.

As with any oxygen sensing technology, the sensor cannot be used with sample gases containing hydrocarbons, combustibles, H2, CO, NO2, S, or Pb, which may give false low readings or damage the sensor.

The flexibility and reliability of coulometric sensors means it is the mainstay sensor of the Servomex DF range, adapted to oxygen measurements at percent, trace and ultra-trace levels.

DELTA-F

DF-500Series

Delta F’s DF-500 NanoTrace analyser series delivers a premium performance for the semiconductor (UHP gas) industry, being widely used for bulk gas monitoring and in process carts for mobile troubleshooting. The DF-500 series is also used by ASU operators and in Olefin manufacturing. The series consists of the DF-500E NanoTrace and DF-560E NanoTrace II, the latter independently proven to provide the lowest LDL in the industry.

2013GUIDE

ANALYSERS BY INDUSTRY

SERVOMEX ANALYSERS

PG19

PG12

PG18

AT THE HEART OF SERVOMEX ARE OUR UNRIVALLED CAPABILITIES IN THE RESEARCH, DESIGN, TESTING AND MANUFACTURE OF SENSOR TECHNOLOGIES.

Our technological expertise has enabled us to develop the outstanding Hummingbird sensor technology on which our reputation is built. Manufactured to the highest quality standards at our industry-leading clean room facilities, Hummingbird technologies are all designed to deliver the same exceptional performance, reliability and accuracy wherever they are partnered.

But nowhere is Hummingbird performance better realised than at the heart of Servomex analysers, where the potential of this core technology is fully realised through our expert applications knowledge.

CONTACT SERVOMEX SYSTEMS THROUGH YOUR LOCAL BUSINESS CENTRE

Q2 2013

PRODUC T PRODUC T DETAILS 3 SELLING POINTS

the SERVOTOUGH range

REAL-TIME LIGHT HYDROCARBON GAS ANALYSER

A real time optical analyser utilising the Precisive field proven optical bench, the SERVOTOUGH SpectraScan delivers a breakthrough capability in the continuous analysis of light hydrocarbons C1-C5+.

Tunable band-pass filter enables simultaneous scanning of selected wavelength bands for gases including Methane, Ethane, Propane and, iso-Butane

Unique tunable filter process with IR photometer technology delivers industry-leading interference compensation

Chemometric algorithm provides a permanent span calibration, low cross-interference (<0.2%), linear response and high baseline stability

SpectraScan

SE

RV

OT

OU

GH

Oxy1900 AWARD-WINNING DIGITAL O2 ANALYSER

Offering an exceptional range of industry-standard options and three unique, ground-breaking functions, the Servomex SERVOTOUGH Oxy O2 gas analyser sets new standards of flexibility, stability and reliability from a single, cost-effective unit.

Heated sample cell allowing significantly simplified sample system requirements

Unique Servomex Flowcube flow sensor technology for improved safety

Internal pressure compensation for barometric and process fluctuationsS

ER

VO

TO

UG

H

SpectraExact2500 RUGGED PHOTOMETRIC GAS ANALYSER FOR DEMANDING PROCESS APPLICATIONS

Servomex’s iconic industry-leading photometric analyser delivers flexible single and multi-component gas analysis capability for corrosive, toxic and flammable sample streams. The SpectraExact’s reliable, accurate and stable real-time online process analysis makes it ideal for a range of process, combustion and emissions gas analysis applications.

Hazardous area certified

Easy integration with DCS - from 4-20mA to Modbus TCP

Sample cell and electronics segregated – for easy maintenance and safe operation

SE

RV

OT

OU

GH

OxyExact2200 HIGH SPECIFICATION PROCESS O2 ANALYSER

The SERVOTOUGH OxyExact high specification oxygen analyser offers an unrivalled combination of precision, flexibility and performance for optimum process and safety control. The OxyExact can be configured with a safe or hazardous area control unit with up to six transmitters.

Zone 1 certified to ATEX Cat 2, IECEx and FM/CSA Class 1 Div1

Three enclosure systems allows sampling of any flammable gas up to 100% O2 and pressures of up to 40psi

High temperature version eliminates the need to condense hot sample prior to analysisS

ER

VO

TO

UG

H

T E C H N O L O G Y K E Y

Gas Filter Correlation Calorimetry Thermal

Conductivity Infra- RedZirconia Paramagnetic

the SERVOTOUGH range

PRODUC T PRODUC T DETAILS 3 SELLING POINTS

13

FluegasExact2700 THE WORLD’S MOST ADVANCED FLUEGAS ANALYSER

Designed to measure O2 and combustibles in flue gases for improved combustion efficiency and reduced emissions, the FluegasExact gas analyser is designed to suit the most demanding needs of combustion efficiency applications in the Power Generation and Process Industries.

Continuous measurement of oxygen and / or combustibles

Unique Flowcube flow sensor technology enables positive flow conditions to be validated

Sulphur resistant combustibles sensor enables sensor to operate at elevated sulphur levels

SE

RV

OT

OU

GH

LaserSP2900 HIGH-SENSITIVITY CROSS-STACK TDL ANALYSER

A high performance gas analyser designed for continuous in-situ monitoring, the LaserSP delivers a fast response time and highly stable performance. Suitable for measuring a range of gases including O2, HCl, HF, NH3, CO, CO2, H2O, H2S, HCN, CH4 and other hydrocarbons, the LaserSP is ideal for a wide range of process, combustion control and emissions applications.

Fast response ideal for control

In-situ with no sample conditioning delivers reliable operation

Wavelength Modulated Spectroscopy provides wide dynamic range and lowest cross interference

SE

RV

OT

OU

GH

LaserExact2900 EXTRACTIVE TDL TRACE ANALYSER

Specifically designed for extractive trace analysis applications, the LaserExact’s TDL technology offers unsurpassed low ppb detection limits for most gases, making it ideal for the measurement of trace gases offline.

Advanced multipass cell delivers ppb or low ppm detection limits

Innovative PeakLock pattern recognition line tracking eliminates drift over extended operational periods

Stable, drift-free performance reduces calibration to typically once a yearS

ER

VO

TO

UG

H

LaserCompact2900 SHORT PATH LENGTH TDL ANALYSER

Optimised for measurement across pipes and along short measurement cells and able to measure through very thin nozzles, reducing or even eliminating consumption of purge gas, the LaserCompact delivers the fast response time, highly stable performance and minimum sample conditioning advantages of TDL technology.

Simplify safety with comprehensive hazardous area approval including flammable sample requirements

Line width correction delivers accurate measurement with variations in matrix

In-situ with low purge gas consumption

SE

RV

OT

OU

GH


Flame Ionisation Detector

Gas Chromatography Plasma Laser Moisture Coulometric SpectroscopicInfra- Red

PRODUC T PRODUC T DETAILS 3 KEY POINTS

the SERVOPRO rangeS

ER

VO

PR

O

DIGITAL MULTIGAS ANALYSER OPTIMISED FOR ASU REQUIREMENTS

Combining industry-leading performance and a range of new and enhanced functions as standard, the MultiExact offers air separation plants a multi-gas analyser specifically optimised to industry requirements - with GFX and paramagnetic measurements now augmented by Servomex’s revolutionary TCD measurement sensing technology.

TruRef technology offers class leading measurements for Ar, He and N2

mA autoranging functionality, user-definable air point calibration autovalidation and autocalibration functions included as standard

Options include digital communication options, an internal valve block function and unique Servomex Flowcube flow sensor technology

MultiExact

SE

RV

OP

RO

4200/4210 FLAMMABLE GAS ANALYSER SUITABLE FOR GAS MIXTURES

The SERVOPRO 4210 multigas analyser is designed to monitor flammable gas samples including H2/CO, ‘HyCO’ or ‘Syngas’ mixtures for trace level contaminants and percent level components.

The 4210 offers oxygen control using Servomex’s unique paramagnetic cell, trace level measurement of CO, CO2, N2O and CH4 using photometric sensor technology, and IR technology for measurement of carbon monoxide, carbon dioxide and methane at percent levels.

Measures up to four gases simultaneously

RS232 / RS485 and Modbus communications

4210 variant includes stainless steel pipework

SE

RV

OP

RO

MonoExact DIGITAL SINGLE GAS ANALYSER WITH NEW TCD MEASUREMENTS

The new SERVOPRO MonoExact gas analyser brings Servomex’s acclaimed TruRef Thermal Conductivity (TCD) technology to ASU operators in a compact, single component analyser, offering class-leading measurements for Ar, He, N2 and H2.

TruRef offers ASU operators truly industry-leading measurements for drift accuracy, linearity and repeatability

Cost-of-ownership optimised by longer calibration intervals and no reference gas requirements

Single-measurement focus of the MonoExact ideal for ASU operators who keep analyser measurements separate

SE

RV

OP

RO

4100 FLEXIBLE MULTIGAS ANALYSER

Offering the capability of measuring CO, CO2, N2O, CH4 and moisture at trace levels and CO, CO2 and CH4 at percent levels - as well as an O2 purity measurement - the flexibility of the SERVOPRO 4100 meets a wide range of process control and product qualification needs.

Simultaneous measurement of up to four gas streams

Independent autocalibration of all measurements with up to eight isolated analogue outputs and up to 12 relays with follow or freeze option

Alarm, fault and calibration history logs

Q2 2013




the SERVOPRO range

PRODUC T PRODUC T DETAILS

15

SE

RV

OP

RO

Chroma VERSATILE TRACE GAS ANALYSER

Offering a unique, non-depleting plasma emission detector, the SERVOPRO Chroma (K4000) analyser is one of the most versatile gas analysers for trace gas measurement available. Most applications will be satisfied by a single 4U rack analyser configuration, making the Chroma a compact, cost effective solution for continuous process control or quality monitoring.

PlasmaHC measurement system requires no FID for THC measurement

Fully automated - tune to the application - system for unique simplicity of use. No need to be an analysis expert to use this GC!

Stand-alone systems requires no third-party software or computer to operate

SE

RV

OP

RO

FID TRACE HYDROCARBON ANALYSER

A Flame Ionization Detector analyser designed to assure safe operation for cryogenic Air Separation plants, the SERVOPRO FID ensures the level of Total Hydrocarbons (THC) is maintained below flammable limits, as well as providing quality control in pure O2, N2, Ar, Air, He and CO2.

Excellent output resolution over three operating ranges

Electronic flow controllers for air, fuel & sample for no dependency to atmospheric pressure variations and inlet pressure variation

Low fuel consumption ensures low cost of operation

SE

RV

OP

RO

4900 MULTIGAS CONTINUOUS EMISSIONS ANALYSER

The SERVOPRO 4900 is specifically designed for the Continuous Emissions Monitoring, where legislation requires the measurement of several gas components in flue gas. The 4900 offers multigas capability for pollutants, greenhouse gases and reference O2, including O2, CO, CO2, NO, SO2, CH4, and N2O.

Low maintenance and cost of ownership

Easy integration with other systems

MCERTS / TÜV approved measurements

SE

RV

OP

RO

Plasma FOR CONTINUOUS MONITORING OF NITROGEN IN ARGON AND HELIUM

Specifically designed for the continuous monitoring of nitrogen in argon or helium or both, the Servomex SERVOPRO Plasma’s unique plasma emission detector provides an accurate, highly stable and reliable measurement ideal for the requirements of ASU plant operators.

Wide measurement range - 0-1ppm, 0-10ppm, 0-100ppm (higher on request)

Electronic flow control system for low flow consumption and reading stability

Patented sample humidity control system for ultimate reading stability

3 KEY POINTS





the SERVOFLEX range

PORTABLE BENCHTOP ANALYSER FOR MEASURING O2 AND CO2

The only truly portable battery powered gas analyser with MCERTS certification, the MiniMP is a portable analyser designed to offer single or dual measurement of O2 and CO2 by utilising Servomex’s advanced paramagnetic and infra-red sensing technologies.

EN15267-3 (MCERTS V3.3, Annex F) makes the MiniMP for source testers that require reference O2 analysis for CEMS verification

Li-ion Ion battery system offers unique true portability

Non-depleting sensor design ensures long service with minimal calibration

MiniMP

SE

RV

OF

LE

X

5100i.s INTRINSICALLY SAFE PORTABLE ANALYSER

Designed for the measurement of toxic and flammable gas samples, the intrinsically safe Micro i.s is a unique analyser certified to Zone 0 and Zone 1 and suitable for measuring percent levels of O2, CO and CO2.

Intrinsically safe design to ATEX and IEC standards ensures safety operation in hazardous environments

Ergonomic design ensures easy operation on the move

Available in non-pumped or pumped version with optional sample conditioning kit S

ER

VO

FL

EX

Mini Food Pack PORTABLE ANALYSER OPTIMISED FOR MODIFIED ATMOSPHERES PACKAGING

A small sample volume portable benchtop analyser designed specifically for the checking and quality control of gas mixtures in Modified Atmosphere Packaging (MAP) used in the food and pharmaceutical industries, the Mini Food Pack enables single or dual measurements for percent levels of O2 and CO2.

Range of sampling accessories is available for taking measurement from rigid or flexible pack

Rechargeable battery option enables complete portability for flexible operation

Non-depleting sensor technology maximises availability and reduces maintenance and operating costs

SE

RV

OF

LE

X

Q2 2013

MiniHD PORTABLE GAS ANALYSER FOR MEASUREMENT OF COMMON GAS MIXTURES

Designed especially for use in field locations or light industrial applications. The SERVOFLEX MiniHD portable gas analyser is a rugged, heavy duty analyser designed to accurately measure the levels of O2, CO and CO2 within common gas mixtures. The MiniHD utilises Servomex’s non-depleting paramagnetic and infra-red sensors to give dependable and accurate results.

Robust IP65 construction meets the demanding needs of field location analysis

Long life Li-ion rechargeable batteries and range of sampling options ensure ease of use

ORSAT validated to meet USFDA performance requirements for verifying medical oxygen USP and nitrogen NF

SE

RV

OF

LE

X




the DF range


17

DF-300Series HIGH SENSITIVITY DIGITAL TRACE O2 ANALYSER RANGE

The DF-300 series is a full-featured, microprocessor-based O2 series offering customers superior value and performance. Based around the DF-310 base model, the DF-300 series using Servomex’s unique, non-depleting coulometric E-sensor technology, the DF-340E enables O2 measurements at percent, trace and ultra-trace levels.

Extensive background gas compatibility and flexible configuration options

Variants include CSA hazardous-area approved DF-320E for indoor installation and DF-340E for outdoor installation

Coulometric E-sensor delivers accurate results with no sensor drifting, false low readings or frequent calibration requirements

DE

LT

A-

F

DF-500Series LEADING ULTRA-TRACE PPT OXYGEN ANALYSER RANGE

Verified by independent experts as measuring oxygen to the lowest PPT levels available, the Delta F Nanotrace analyser range from Servomex delivers the premium performance in ultra-trace oxygen measurement. Consisting of the DF-550E NanoTrace and DF-560E NanoTrace II, the Nanotrace series delivers exceptional O2 measurements at trace and ultra-trace PPT levels.

The de facto industry standard for the reliable measurement of oxygen in semiconductor manufacture

Fast response and quick upset recovery ensures ultimate performance

Options include flexible configurations and hand carry portable optionD

EL

TA

-F

DF-100Series VERSATILE O2 ANALYSER RANGE WITH MULTIPLE OPTIONS

An industrial gas analyser range designed to deliver stable, accurate and reliable O2 measurement at percent and trace levels, the DF-100 series utilises unique, non-depleting E-sensor technology to deliver accurate results with no sensor drifting, no false low readings or no frequent calibration requirements.

Unique non-depleting technology for long term stability and ease of maintenance

Unique measurement stability allowing SPAN calibration only once a year!

Unique Stab-El™ acid gas alarm option neutralises trace contaminants

DE

LT

A-

F

DF-700Series TDL TRACE MOISTURE ANALYSER RANGE

A sophisticated process moisture analyser range which offers users the comprehensive solution for trace and ultra-trace moisture measurement, the DF-700 series combines the latest Tunable Diode Laser Absorption Spectroscopy (TDL) technology, a robust measuring cell and a true baseline reference for highly accurate moisture measurement.

Exceptional sub-ppb moisture level readings which exceed current UHP moisture measurement requirements

Models DF-750 NanoTrace (base model); DF-745 (high sensitivity 2ppb LDL); DF-745SG (specialty gas trace moisture analyser); DF-730 (moisture in HCl); DF-740 (moisture in ammonia); DF-760 dual oxygen and moisture measurement

Second Harmonic detection technology for long life and robustness to particulates contamination

DE

LT

A-

F




18

Q2 2013

HEALTH CHECKCOMMISSIONINGON-SITE SERVICE

SUPPORTSERVICE CENTRE

SUPPORT

A Servomex Health Check is an ideal solution for customers who require performance and quality validation of their equipment. Choose from a validation at a Service Centre, or an on-site visit from an expert engineer who can also provide operator training.

You need reassurance from start-up that your analyser is delivering optimum performance. A Service Network Start-Up and Commissioning package provides you with one of our highly trained commissioning engineers to ensure you get the best from your investment.

Whether you need urgent assistance with an emergency or are simply due a routine maintenance visit; our Global Network of experienced Service engineers are available to provide prompt and efficient local-for-local on-site support.

Our network of Regional Service Centres are located close to every customer’s installed park, receiving analysers for the fastest possible turnaround of repairs, preventative maintenance, calibration and analyser upgrades.

TRAINING SPARESSERVICE

CONTRACTSRENTAL

EQUIPMENT

A trained in-house maintenance team can better support the performance of Servomex products, ensuring long term reliability and maximising ROI. Delivered through state of the art training centres in Europe, USA and Asia, our comprehensive training packages deliver our expertise directly to your team.

Access to the right spare parts and consumables is critical in maintaining the operation of your plant. Servomex’s factory authorised spares are of the highest quality and ready to ship whenever you need them, ensuring minimal downtime and the continued long-term efficiency of your equipment.

Regular maintenance can add real value through improved plant reliability, uptime and optimisation. We offer a wide range of maintenance services, from off the shelf packages to fully customised agreements, which include spare parts discounts, pre-scheduled visits, and emergency call outs.

Whether you require the loan of a replacement analyser during repairs or need to undertake equipment trials, Servomex have an extensive range of products to rent through our Global Network. Long or short term agreements are available.

EIGHT GREAT PRODUCTSONE GLOBAL SERVICEServomex Service Network provides a comprehensive package of service and support to ensure optimum process performance - wherever you are.

VISIT SERVOMEX.COM/SERVICE OR CONTACT YOUR LOCAL BUSINESS CENTRE TODAY

19

HYDROCARBON PROCESSING

DELTA FDF-370EDustproof, waterproof, explosion proof trace O2 measurement for polymer grade feedstocks

SERVOTOUGHOxy 1900 Award-winning paramagnetic oxygen analyser suitable for oxidation and inerting applications

SERVOTOUGHLaserCompact 2900High sensitivity in-situ TDL analyser optimised for short path lengths and fast on-line process measurements

SERVOTOUGHOxyExact 2200 High accuracy paramagnetic oxygen analyser for safety-critical oxidation

SERVOTOUGHSpectraExact 2500Robust process gas infra-red analyser for percent to ppm measurements



SERVOTOUGHLaserSP 2900High sensitivity in-situ or TDL analyser for combustion, emissions or low oxygen measurements

SERVOTOUGHFluegasExact 2700High performance fluegas analyser for O2 and COe combustibles with unique flow diagnostics

Q2 2013

2013

THIS PRODUCT GUIDE IS THE EASY WAY TO FIND THE SERVOMEX ANALYSER RELEVANT TO YOU.

Key analysers have been grouped by industry, with a description of their principle functions and relevant applications.

SERVOTOUGHSpectraScanOn line optical analyser offering continuous analysis of light hydrocarbons C1-C5+




Gas Chromatography

Plasma

Laser Moisture

Coulometric

Zirconia

Gas Filter Correlation

Calorimetry

Thermal Conductivity

Paramagnetic

Infra-Red

Spectroscopic

20

Q2 2013

SERVOTOUGHFluegasExact 2700For control combustion in SMR processes

DELTA FDF-320ECertified to measure trace oxygen in H2 in a hazardous area

DELTA FDF-550EUltra-trace ppt oxygen analyser

DELTA FDF-560ELowest level ultra-trace ppt oxygen analysis available

DELTA FDF-740/750High sensitivity ppt LDL moisture analyser

DELTA FDF-745Sub-ppb moisture analyser

DELTA FDF-760EDual sub-ppb oxygen and moisture measurement

SERVOPROMultiExact (O2) Flexible multigas analyser with oxygen purity and trace measurements

SERVOPRO4100Flexible multigas analyser meets regional Pharmacopoeia

SERVOPROChromaApplication specific % gas analyser validates nitrogen purity as per European Pharmacopeia

SERVOPROChroma Flexible sub-ppb LDL gas analyser for N2 and Ar measurements

SERVOPROChromaTrace measurement ensures quality control

DELTA FDF-150EVersatile oxygen analyser

MEDICAL GASES

UHP SEMICONDUC TOR MANUFAC TURE

HYDROGEN PRODUC TION

UHP SEMICONDUC TOR MANUFAC TUREMEDICAL GASES

SERVOTOUGHLaserCompactFor O2 control in H2 production by electrolysis

DELTA FDF-310EPremium oxygen analyser measures trace oxygen in medical grade nitrogen

SERVOFLEXMiniMP 5200Portable analyser validates purity during transfilling operations

21

SERVOPRO1440Single or dual measurement of O2, CO, CO2 or CH4 – ideal for Source Testers

SERVOPRO4900Continuous emissions analyser with multiple gas capability

SERVOTOUGHSpectraExact 2500Single or dual component gas analysis for emissions

SERVOPROMultiExact‘Next generation’ digital multigas analyser

SERVOPRO4100Flexible multigas analyser with up to four simultaneous measurements

SERVOPRO4210Flammable gas analyser suitable for specialty gas mixtures

DELTA FDF-745SGTrace moisture analyser optimised for specialty gas blends production

DELTA FDF-550EUltra-trace PPT oxygen analyser

DELTA FDF-310EHighly sensitive and versatile trace oxygen analyser

SERVOTOUGHLaserExactTrace level measurements in pure gases (e.g. CO in H2, NH3 in CO2)

SERVOPROPlasmaFor continuous monitoring of nitrogen in argon and/or helium

SERVOPROFIDTrace hydrocarbon analyser

SERVOPROChromaVersatile trace gas analyser

SERVOTOUGH1800Continuous MAP headspace monitoring of O2 level

SERVOPRO4100Multigas analyser for MAP headspace monitoring of O2 level

SERVOTOUGHLaserSP 2900Monitors wide range of gases in hot, dangerous environments

EMISSIONS MONITORING

SPECIALT Y GASES

SPECIALT Y GASES

SPECIALT Y GASES FOOD & BEVER AGE

Q2 2013

22

SERVOTOUGH1800Accurate and stable oxygen analyser for safe area use

SERVOTOUGHOxy 1900Award-winning intrinsically safe oxygen analyser

SERVOTOUGHOxy 1900Award-winning paramagnetic O2 oxygen analyser suitable for hazardous area use

SERVOTOUGHOxyExactHigh specification process oxygen analyser for hazardous and safe area use

SERVOTOUGHFluegasExact 2700Fluegas combustion gas analyser

SERVOFLEXMini Food PackFor monitoring Modified Atmosphere Packaging (MAP), including O2 in coffee and CO2 in fresh meat

SPECIALT Y CHEMICALS

FOOD & BEVER AGE

SERVOTOUGHSpectraExact 2500Single or dual component gas analysis for trace analysis of solvents or liquids

SERVOTOUGHLaserCompactFor measurement of H2O in C2H4, Cl2 or HCl in EDC/VCM/chlor-alkali plants

SERVOTOUGHLaserCompactFor measurement of H2O inC2H4, Cl2 or HCl in EDC/VCM/chlor-alkali plants

SERVOTOUGHLaserExactMeasurement of HCl in VCM plants

SPECIALT Y CHEMICALS

SERVOFLEXMicro i.sIntrinsically safe portable gas analyser

SERVOTOUGHLaserSP 2900Monitors wide range of gases in hot, dangerous environments

SPECIALT Y CHEMICALS IRON & STEEL

SERVOPRO4100Established multigas analyser ideal for monitoring O2 in air separation processes

SERVOTOUGHLaserSP 2900Leading in-situ TDL combustion analyser, ideal for O2 analysis in hazardous foundry environments

SERVOPROMultiExactLatest generation digital analyser ideal for monitoring O2 in air separation processes

IRON & STEEL

Help is at hand. Contact your local business centre or visit www.servomex.com

Need ANALYSER ADVICE?

SERVOTOUGHLaserSPTDL cross stack combustion analyser ideal for hot, dangerous environments

SERVOTOUGHFluegasExact 2700Industry-leading fluegas combustion gas analyser for O2 and/or COe

SERVOPROMultiExactFlexible multigas analyser with new TruRef TCD technology

SERVOPROMonoExactHalf-rack single measurement TruRef TCD analyser

SERVOPROMultiExact‘Next generation’ digital multigas analyser


SERVOPROPlasmaFor continuous measurement of trace N2 in helium

SERVOPROChromaTrace analyser suitable for monitoring trace impurities in processing high-quality helium gas


SERVOPROPlasmaFor continuous monitoring of nitrogen in argon

SERVOPROFIDTrace hydrocarbon analyser

DELTA FDF-310EHigh sensitivity digital trace oxygen analyser

DELTA FDF-150EVersatile oxygen analyser

SERVOPROChromaMeasures trace N2 in crude Ar, total hydrocarbon and Ar purity

SERVOFLEXMicro i.sIntrinsically safe portable gas analyser

POWER GENER ATION

AIR SEPAR ATION

AIR SEPAR ATION

HELIUM PRODUC TION

SERVOFLEXMiniMPPortable benchtop analyser for measuring O2 and CO2

23

WHATEVER YOUR GAS ANALYSIS REQUIREMENTS, WHEREVER YOU ARE:

WE’RE READY TO HELP.GLOBAL BUSINESS CENTRES

LATIN AMERICA BUSINESS CENTRE (Empresa do Grupo Spectris)

Rua Laguna 276, Santo Amaro Sao Paulo – SP – Brasil CEP 04728-000

Tel: +55 11 5188 8166 Fax: +55 11 5188 8169 Email: [email protected]

INDIA BUSINESS CENTRE

India Business Centre and Systems Engineering Spectris Technologies Pvt. Ltd. Plot No.A-168, M.I.D.C. TTC Indl. Area Thane-Belapur Road Khairane Navi Mumbai- 400 7099 India


MIDDLE EAST BUSINESS CENTRE

Middle East Business Centre Warehouse Q3 - 197 - SAIF Zone PO Box 8962, Sharjah, UAE

Tel: +971 6552 8073 Fax: +971 6552 8074 Email: [email protected]

AMERICAS BUSINESS CENTRE

Systems Engineering and Service 525 Julie Rivers Dr., Suite 185 Sugar Land, Texas 77478, USA


ASIA PACIFIC BUSINESS CENTRE

Asia Pacific Business, Systems Engineering and Service Centre Bldg. 9, Shanghai Euromate Industrial Park No. 88, Yuanshan Road, Xinzhuang Industrial Park Shanghai 201108, P.R. China

Tel: +86 (0)21 6489 7570 Fax: +86 (0)21 6442 6498 Email: [email protected]

EUROPEAN BUSINESS CENTRE

European Business Centre PO-Box 406 2700 AK Zoetermeer The Netherlands

Tel: +31 (0) 79 330 1580 Toll Free: 00800 7378 6639 (NL, D, GB, F)

Fax: +31 (0) 79 342 0819 Email: [email protected]

GLOBAL TECHNICAL CENTRES

UK TECHNICAL CENTRE

Servomex Limited UK Technical and Service Centre Jarvis Brook, Crowborough East Sussex, TN6 3FB, UK

Tel: +44 (0) 1892 652 181 Fax: +44 (0) 1892 662 253

AMERICAS TECHNICAL CENTRE

Servomex Company Inc. Boston Technical and Delta F Service Centre 4 Constitution Way Woburn MA 01801 1087, USA

Tel: +1 781 935 4600 USA Toll Free 1 800 433 2552

Fax: +1 781 938 0531 Email: [email protected]

Servomex has a policy of constant product improvement and reserves the right to change specifications without notice. © Servomex Group Limited. 2013. A Spectris company. All rights reserved.

WWW.SERVOMEX.COM

A MEASURABLE ADVANTAGE

Servomex ES Q2 2013

Documents

Transcript of Servomex ES Q2 2013