Servomex ES Magazine 2014 Issue 1

Better �an �e Getter

SERVOPRO NANOCHROME

REDEFINES UHP GAS ANALYSIS

American DreamNEW HOUSTON BUSINESS

CENTER OPENS

A Game-Changer in Gas Detection

OXYDETECT O2 MONITOR

Read ES onlineat servomex.com/

ESmagazine

SERVICEServomex launches Service Network SERVAt your

INCORPORATING THE SERVOMEX

GUIDE2014

S E R V O M E X N E W SISSUE ONE 2014

Every percent counts, and the SERVOPRO Chroma can help you increase argon production yields by up to 3%. Think how much more revenue that could create for your business.

EXTRACT MORE PROFITSERVOPRO CHROMA INCREASES ARGON EXTRACTION BY UP TO 3%

IN THE ASU PROCESS, THE MORE ARGON YOU EXTRACT, THE MORE PROFIT YOU MAKE.IN THE ASU PROCESS, THE MORE ARGON

FIND OUT HOW YOU COULD BOOST EFFICIENCY, PRODUCTIVITY & PROFIT: DOWNLOAD THE WHITE PAPER FROM:

SERVOMEX.COM/CHROMA OR TO REQUEST ONE, EMAIL: [email protected]

A revolution in measurement speed and accuracy, the SERVOTOUGH SpectraScan gives you real-time readings for light hydrocarbons C1-C5+.

MOVE OVER GCTHE FUTURE OF ON LINE GAS ANALYSIS IS HERE.

LEARN MORE ABOUT THE REVOLUTION IN HYDROCARBON GAS ANALYSIS: DOWNLOAD THE WHITE PAPER FROM:

SERVOMEX.COM/SPECTRASCAN OR TO REQUEST ONE, EMAIL: [email protected]

The New SERVOTOUGH SpectraScan

GET THE UHP MEASUREMENT YOU CAN TRUST CONTACT YOUR LOCAL SERVOMEX BUSINESS CENTRE DOWNLOAD THE WHITE PAPER FROM:

SERVOMEX.COM/NANOCHROME OR TO REQUEST ONE, EMAIL: [email protected]

EVERYTHING’S CHANGEDTHE SERVOPRO NANOCHROME. THE BIGGEST CHANGE IN UHP GAS ANALYSIS FOR A GENERATION

THE NEW SERVOPRO NANOCHROME BENEFITS

• New PED Sensor technology enables sub-ppb measurement of H2, CH4, CO, CO2 and NMHC• Ultra low measurement accuracy from advanced ProPeak signal recovery methodology • No consumables or fuel gas required, reducing costs and improving safety• Enables a unique total Servomex solution for UHP gas analysis

A MEASURABLE ADVANTAGES E R V O M E X . C O M

CEVERYTHING’SCHANGED

Need ANALYZER ADVICE?

Contact your local business center or visit www.servomex.com

GAME CHANGERCHANGER

GAS DETECTION HAS CHANGED FOREVER

Latest Paracube micro sensor never needs replacing No loss of reliability means no more false alarms Optional five-year warranty including the sensor Easy to use digital interface

Get the benefits:

NO REPLACEMENT SENSORS, NO FALSE ALARMS.Oxygen detectors are vital to your safety - but replacing the sensors means more cost and more downtime. The Servomex OxyDetect has sensors that never need replacing, saving you time, money and loss of productivity.

DOWNLOAD THE WHITE PAPER FROM:

SERVOMEX.COM/OXYDETECT OR TO REQUEST ONE, EMAIL: [email protected]

GET THE UHP MEASUREMENT YOU CAN TRUST CONTACT YOUR LOCAL SERVOMEX BUSINESS CENTRE DOWNLOAD THE WHITE PAPER FROM:

SERVOMEX.COM/NANOCHROME OR TO REQUEST ONE, EMAIL: [email protected]

EVERYTHING’S CHANGEDTHE SERVOPRO NANOCHROME. THE BIGGEST CHANGE IN UHP GAS ANALYSIS FOR A GENERATION

THE NEW SERVOPRO NANOCHROME BENEFITS

• New PED Sensor technology enables sub-ppb measurement of H2, CH4, CO, CO2 and NMHC• Ultra low measurement accuracy from advanced ProPeak signal recovery methodology • No consumables or fuel gas required, reducing costs and improving safety• Enables a unique total Servomex solution for UHP gas analysis

Welcome to Expert Solutions

THE SERVOMEX PRODUCT MAGAZINE

ES is published quarterly by Servomex Group Limited, Jarvis Brook, Crowborough, East Sussex, TN6 3FBEditorial enquiries and feedback should be sent to Colin Jones, Marketing Communications Director.

Email: [email protected] @servomex linkedin.com/servomex

VISIT SERVOMEX.COM/SERVICE AND DOWNLOAD THE BROCHURE

S E R V O M E X N E W S

Dear reader,

It is only six months since I took charge of Servomex following the retirement of Chris Cottrell, but already the changeover is a distant memory. Our business never stops, so my focus has been on taking Servomex forward to a new level of achievement.

As a member of Servomex’s senior management team since I joined the company in 2008, I understand the complex issues facing our customers on the ground. It is my responsibility to ensure Servomex continues to help you meet the challenge. Keeping you at the core of our business focus remains our priority.

Servomex’s relationship with our customers is the beating heart of our business. I want us to be the partner that puts your needs before everyone else, so we are constantly improving how we support your operations. In this issue of Expert Solutions you will see the progress we are making: better customer support delivered through our new Americas Business Center and Singapore Service Center; a brand new service offer available from our new Service Network; and brand new products in our SERVOPRO NanoChrome UHP gas analyzer and ground breaking OxyDetect paramagnetic gas monitor. We might even have some unexpected surprises in store.

When combined with our leading edge technology, in-depth applications knowledge and delivered through our expert team, I believe we offer you the best possible partnership that precisely meets your application needs.

I wish you a prosperous 2014 and look forward to continuing to work on your behalf.

Yours faithfully,

Chuck Hurley President Servomex Group Limited

WANT TO VIEW OUR

PRODUCTS ONLINE?

Visitwww.servomex.com

EXPERT SOLUTIONS IS THE PRODUCT MAGAZINE FROM SERVOMEX, HIGHLIGHTING THE PRODUCTS AND TECHNOLOGY HELPING CUSTOMER APPLICATIONS AROUND THE WORLD.

IN THIS ISSUE...

Global News UpdateNews from your local Servomex team

4

Product Focus: Servomex OxyDetectGame-changing gas detection

8

Product Focus: SERVOPRO FIDProtecting ASUs from hydrocarbons

9

Technology Focus: Plasma Emission DetectionBreakthrough sensing for UHP gases

10

MESSAGE FROMCHUCK HURLEY

Product Focus: SERVOPRO NanoChromeUHP gas analysis transformed

6

Product Focus: Servomex Service NetworkOur new-look Service offer

7

3

ISSUE ONE 2014

GLOBAL NEWS Update

5

Servomex has relocated the Americas business headquarters to a brand new, custom-built facility in Houston.

A significant investment in the long-term future for Servomex in America, the decision to open a new Business Center – located close to the former Servomex site in Sugar Land – was driven by an increase in demand for Servomex’s best-in-class systems integration products and highly trusted Service team.

In addition to an impressive 14,000 sq. ft. state-of-the-art workshop facility and warehousing space, the new headquarters includes 10,000 sq. ft. of office space, centralizing the entire business process from engineering, sales and marketing, through to customer service, training and delivery. The result is extensive internal collaboration throughout the business, generating significant process efficiency improvements.

Customers, channel partners and staff are already benefitting at every level. In particular, the introduction of a single distribution center has focused on reducing delivery times and the introduction of a centralized, sophisticated communications system ensures internal collaboration with Servomex counterparts worldwide in order for customers to benefit from the company’s vast global expertise. Meanwhile, brand new integrated training facilities and conference areas enhance the training experience.

Martin Cox, General Manager for Servomex Americas, said: “The move represents a substantial investment in our future within the region and is the first stage of our Americas business growth strategy. The new facility is wholly equipped to undertake the very largest systems integration projects, bringing our world-class consultation, design, products and

assembly for safety critical integration to an even broader customer base. The facility also includes a brand new on-site service center that will further enhance customer after sales support experience. It is the evolution of the business philosophy of Servomex in Houston.”

SERVOMEX AMERICASOPENS NEW BUSINESS CENTER

Contact Servomex Americas todayEmail [email protected] Call +1 281 295 5800

FIND OUT MORE AT SERVOMEX.COM/SYSTEMS

The Boston Technical Center is to take the global lead on delivering world-leading gas analysis to the Industrial Gas market.

Following the appointment of Dr Mike Proctor to the new role of Director of Marketing and Engineering – Boston Technology Center (BTC), the Boston team will focus on growing Servomex’s

existing class-leading range of analyzer, systems and service solutions.

Already the production center for Servomex’s DF analyzers, this new focus will see the further development of DF and

SERVOPRO analyzer ranges for IG, UHP and associated markets. The expansion of a new product development capability will enable Servomex to deliver our customers ‘next-generation’ analyzer packages.

BOSTON TAKES GLOBAL LEAD FOR IG CUSTOMERS

Contact Mumbai Business Center todayEmail [email protected] Call +91 22 3934 2700

Contact Servomex Americas todayEmail [email protected] Call +1 281 295 5800

Contact Zarina Stanley todayEmail [email protected]

Convened with customers across the globe, the meetings brings key analyzer system users together with senior Servomex experts to discuss a range of issues in a constructive and open environment. Meetings cover a wide agenda, which typically cover discussions of application issues, technology presentations and even future product development. Recent issues under discussion include targets for measurement availability; the application and assessment of SIL safety levels; and a review of combustion technologies.

“UAC meetings are designed to cover current needs but also discuss future trends – so we respond not only to immediate issues but also understand how to support our customers as they develop. Servomex is the only company I know of which meets directly with our customers in this way, making us the only company that really listens, evaluates and reacts effectively,” says Zarina Stanley, Global Market Manager, Hydrocarbon Processing.

“Attendees to our recent meetings all commented that the agenda subjects were very relevant, with speakers whose technical knowledge and practical experience which made the meeting very interactive. As always, we thank all our attendees for the time, energy and input which makes the UAC meetings such as success.”

Servomex’s Mumbai team, who organised stands at the Automation 2013 and Petroleum and Natural Gas Conference & Exhibition 2013 (PNID) tradeshows, have been awarded first prize and third prize respectively for the excellence of their stand and presentation.

Servomex was award the first-place Platinum award in the small stall category at the Automation 2013 conference, which took place in Mumbai in September. With an exhibition focus on process automation and control systems and field instrumentation, Servomex exhibited key products including SERVOTOUGH FluegasExact flue gas analyzer, SERVOTOUGH LaserSP TDL analyzer, SERVOTOUGH OxyExact, DF-310E oxygen analyzer and SERVOPRO Chroma trace analyzer.

The award was presented to Virlesh Desai, General Manager, India by Mr B R Mehta, Senior Vice President of Reliance Industries.

Servomex also won third prize for best stand at PNID 2013, a tradeshow held

in New Delhi in October. Organized by International Society of Automation (ISA) Delhi Section and opened by Dr Marpadi Veerappa Moily, Minister for Petroleum and Natural Gas, Servomex presented alongside other key technology innovators including Bopp & Reuther, Axis Solutions, Pepperl + Fuchs India Pvt Ltd, Chemtrols Industries Ltd and Pyrotech Electronics.

Alongside the presentation of products on a stand manned by Servomex’s expert team in India, Mr Desai also presented a paper on the technology and benefits of Servomex’s new SpectraScan trace hydrocarbon analyser.

Servomex was awarded third prize in the best stand category.

“I feel the content of our stall and the presentation is what impressed the judges” says Virlesh Desai, General Manager, India.

“The ability of customers to examine and use our products, supported by displays and videos that clearly show their features and benefits, has been well received and we are delighted to have been honoured in this way.”

SERVOMEX WINS INDIA TRADESHOW AWARDS

USER ADVISORY COUNCILS SUCCEED IN 2013

CONTACT SERVOMEX SYSTEMS THROUGH YOUR LOCAL BUSINESS CENTER

SERVOPRO AnalyzersNanoChrome

ISSUE ONE 2014

INCORPORATING THE LATEST ADVANCES IN GAS SENSING TECHNOLOGY AND SIGNAL PROCESSING METHODOLOGY, THE NEW SERVOPRO NANOCHROME FROM SERVOMEX TRANSFORMS ULTRA-TRACE PURITY MEASUREMENTS FOR UHP GASES.

SERVOPRO NANOCHROMEUHP GAS ANALYZERULTRA-TRACE GAS ANALYZER REVOLUTIONISES UHP GAS ANALYSIS FOR THE SEMICONDUCTOR INDUSTRY

Designed specifically for the measurement of contaminant gases and hydrocarbons that can be present at ultra-trace levels in semiconductor manufacture, the NanoChrome delivers a superb and stable sub-ppb measurement for H2, CH4, CO, CO2 and NMHC in a range of common background gases including He, H2, N2, Ar and O2.The result is an analyzer that offers not only numerous measurement and performance advantages over traditional Flame Ignition Detector (FID) and Reduction Gas Detection (RGD) technologies, but delivers substantive cost and safety benefits not previously available to customers that rely on the highest possible gas purities to maintain product quality.

The NanoChrome delivers exceptional low detection limits through an innovative high-sensitivity Plasma Emission Detector (PED) specially developed by Servomex. Already field proven through ultra-trace measurements of N2 and Ar, the extended measurement wavelength enables the enhanced PED to include measurements for H2, CH4, CO and CO2, as well as a direct hydrocarbon measurement with no need for a methaniser.

As the PED sensor requires only a carrier gas, external contamination from air and fuel is removed. While it is still very important to have a clean carrier gas, techniques exist to obtain a clean helium or argon carrier gas with a total impurity level below 1 ppb. In addition, avoiding the use of hydrogen and air reduces ownership cost as less gas is consumed and less purification systems are required.

The analytical sensitivity and reliability of the NanoChrome is enhanced by advanced signal recovery, utilising specially developed adaptive chromatographic filtering methods and ProPeak peak detection techniques for a more sensitive and selective measurement than previously available for UHP gases. By utilising a Direct Analysis Methodology, the NanoChrome removes the doubt associated with measurements made by FID and RGD measurements with the certainty of exceptional measurement accuracy.

Integrated alongside the Servomex DF-500 ultra-trace analyzer series and DF-700 moisture analyzer series, Servomex now offers the semiconductor industry a single, complete solution for reliable UHP gas analysis. Supported through a global support network of sales, service and support, Servomex is the only gas analysis manufacturer to deliver a single supplier solution for all UHP gas purity measurements.

KEY NANOCHROME APPLICATIONS Ultra-trace measurement of Ultra-High Purity gases used in Semiconductor Manufacture

PlasmaDOWNLOADTHE WHITE PAPER:

SERVOMEX.COM/NANOCHROME

�e SERVOPRO NanoChrome is a breakthrough in the measurement of UHP gas impurities. Servomex has taken fundamentally fresh approach to responding to what UHP users want: a more flexible, accurate and reliable measurement, provided through a single analyzer partner, which delivers immediate performance, cost and safety benefits. �e result is a genuine leap forward for UHP gas analysis, which will have a positive impact for the semiconductor industry. Dawei Zhang, Product Marketing Manager, Servomex

Contact Dawei direct [email protected]

EVERYTHING’S

CHANGED

in UHP Analysis

Contact your local

business center TODAY

7


CONTACT YOUR LOCAL BUSINESS CENTER TODAY

Service

SERVOMEX HAS LAUNCHED THE SERVOMEX SERVICE NETWORK – OUR NEW LOOK SERVICE BRAND WHICH OFFERS THE COMPLETE AND EXPERT SUPPORT FOR GAS ANALYZER OPERATIONS ACROSS THE WORLD, DELIVERED THROUGH A CLEAR AND EASY-TO-USE PRODUCT STRUCTURE.

SERVOMEX SERVICE NETWORKTAKING SERVICE TO A NEW LEVEL

The new Servomex Service Network builds on an already successful Service offer, which has developed as part of Servomex’s global infrastructure. By offering customers world-leading support for their operations, delivered regionally through seven Service Centers and on-site through an expert team of mobile engineers, the Service Network truly supports the lifetime operations of Servomex’s global install base.

As a global support network, Servomex work together as a team in order to provide the best possible service.

All of our engineers are fully certified and highly experienced in delivering our product range. They are committed to providing customers with a superior service, whether for a routine maintenance visit, responding quickly to a breakdown or through an interactive training session. This unified approach to Service, delivered on a local-for-local basis where customers need it, delivers fast, reactive support with a level of expertise and insight unavailable elsewhere.

Servomex prides itself on having a complete solution for each customer. There are nine distinct Service Network products, which together cover the entire lifetime support requirement for any Servomex analyzer or system. Ranging from analyzer health checks to

complete packages of system support, each product is designed and structured to fulfil key service requirements to the highest standards of quality and delivery.

Service Network products, which can be bought individually or combined into a service package, are available to order direct from your local Business Center. A new website hub at www.servomex.com/service also gives instant access to Service Network information, with contact details for your local Business Center and information on all products available for download.

All this is delivered through a distinctive brand that is easy for customers to recognise, utilising red and black colours that reflect the fast-response ethos of our team and the trust our customers place in us.

ISSUE ONE 2014

Servomex Service Network is Servomex expertise, delivered direct to your plant – ensuring your processes run with optimum efficiency, safety and profitability. Most importantly, choosing Servomex Service Network means complete peace-of-mind that your operations are fully supported. When it comes to service, we are the team to trust.Sarah Chalk, Head of Service, Servomex

DOWNLOADTHE SERVICE BROCHURE:SERVOMEX.COM/SERVICE

Contact Sarah [email protected]

CONTACT YOUR LOCAL BUSINESS CENTER TODAY

SERVOMEX GAS DETECTIONOxyDetect

THE FIRST PRODUCT TO BE LAUNCHED UNDER THE NEW SERVOMEX GAS DETECTION BRAND, THE OXYDETECT IS A SAFE AREA MONITOR WHICH UTILISES ADVANCED NON-DEPLETING PARAMAGNETIC TECHNOLOGY TO ACCURATELY MONITOR OXYGEN LEVELS – WITHOUT THE SENSOR DETERIORATION THAT AFFECTS TRADITIONAL ELECTROCHEMICAL SENSORS USED IN COMPETITOR DETECTORS.

SERVOMEX OXYDETECTGAME-CHANGING GAS DETECTION FROM SERVOMEX

Designed for use in life critical applications, the OxyDetect utilises the Hummingbird Paracube® Micro paramagnetic sensor, whose industry-leading levels of linearity, accuracy and reliability have ensured its use as a trusted oxygen sensor for the OEM medical market. The OxyDetect therefore demonstrates several advantages over traditional technologies, ensuring users enjoy an unprecedented level of safety and performance as well as a lower cost of lifetime ownership.

The OxyDetect’s non-consumable design ensures longevity and eliminates the costs associated with the regular replacement of electrochemical, galvanic or fuel cells, as well as the recognised problems of cell degradation when in use or kept as a stock item. As the OxyDetect’s paramagnetic measurement stability also eliminates the requirement for frequent calibration, users avoid frequent labour and downtime costs, incurred either when a traditional cell is calibrated or replaced due to anticipated expiration or sudden failure.

The robust non-depleting technology delivers both substantial cost savings and minimal

maintenance requirements to make it the ideal choice for integration either into a new Fixed Point oxygen monitoring system, or as a replacement technology for existing point monitors using inferior depleting technology.

As well as significantly reducing the cost of ownership, saving time and money, the OxyDetect utilises advanced microprocessor-based diagnostics that are safe, reliable and easy to access via a simple front panel digital interface. Suitable for use in indoor environments ranging in temperature from 5°C to 45°C, the OxyDetect offers an isolated 4-20mA output with linear measurement for simple integration, an output range of 0-25% O2 and a fault alarm via mA jam to 0mA.

DOWNLOADTHE WHITE PAPER:

SERVOMEX.COM/OXYDETECT

Contact Rhys [email protected]

9

Hummingbird Paracube® Micro Sensor

�e Servomex OxyDetect is a breakthrough in life safety applications, which changes the game for a gas detection market used to unreliable and ultimately expensive consumable sensors. �e OxyDetect is unique – a life safety system is only as good as the sensors it uses, and this is the safest, most reliable oxygen gas detector on the market.Rhys Jenkins, Product Marketing Manager, Servomex

ISSUE ONE 2014

KEY OXYDETECT APPLICATIONS Life safety monitoring for chemical production, hydrocarbon processing, industrial gas production, laboratories and more

Paramagnetic

FIND OUT MORE AT SERVOMEX.COM/SYSTEMS

SERVOPRO AnalyzersSERVOPRO FID

UTILISING THE LATEST SENSOR AND SOFTWARE PROCESSING TECHNOLOGY, THE SERVOPRO FID’S ABILITY TO ACCURATELY MEASURE TOTAL HYDROCARBONS ENSURES PRODUCT QUALITY AND PROTECTS PLANT SAFETY ACROSS ALL INDUSTRIAL GAS APPLICATIONS.

SERVOPRO FID

Due to the global growth of heavy industries, the hydrocarbon content in ambient air has risen sharply in many regions in recent years, these increasing Total Hydrocarbon (THC) levels have brought new challenges for the safe and successful operation of ASU plants: THCs in the air extracted by an ASU must be scrubbed to an acceptable level to avoid contaminating product quality, while the presence of THC in an O2 LP column can be an explosive hazard if mixed with pure O2.Servomex has the complete solution to protect ASU against hydrocarbon contamination: The SERVOPRO FID, a Flame Ionization Detector analyzer designed to assure safe operation within Cryogenic Air Separation plants by assuring the THC level is maintained below flammable limits, as well as providing quality control for pure O2, N2, Ar, and Air

The SERVOPRO FID analyzers uses a high-performance, low-noise Flame Ionization Detector (FID), which burns hydrocarbons present

in a sample, producing charged molecules that cause electrical conduction between 2 electrodes. The FID measures the conduction of charged particles and produces an output which is directly proportional to the concentration of Total Hydrocarbons (THC) in the sample. Enhanced by a state-of-the-art logarithmic amplifier that decreases drift and thermal noise, Servomex’s FID technology offers accurate measurements and clean operation with a guaranteed 100ppb resolution.

As an essential safety instrument, the FID offers extensive remote communication options through full Ethernet and internet connectivity – making it ideal even for unmanned plants. Capable of remotely control via a network or an internet browser, operators are able to check all parameters or troubleshoot the unit offsite. In addition, the FID can also be configured to be monitored via a standard 4-20 mA output to transmit process values to a remote system.

Ease of use is facilitated by a simple and intuitive user interface, enabling users to view values including real time measurements and system status. The unit includes diagnostic options that allow engineers to obtain important operation information including calibration parameters, PID constants, Ethernet parameters and alarm historic data with date and time.

With many FID technologies, the supply of fuel gas is expensive and time consuming. With a smart Servomex design, as well as an on-board flow control device, SERVOPRO FID reduces fuel consumption to its minimum while supporting the flame. In laboratory testing, the SERVOPRO FID consumed no less than half the fuel cylinders of the nearest competitor product, delivering significant fuel cost savings.Dawei Zhang, Product Marketing Manager, Servomex

TRACE HYDROCARBON ANALYZER

KEY THC MONITORING APPLICATIONSInlet and Low Pressure Column in Air Separation Plants for Safety; Truck filling stations and product pipelines; Cylinder filling stations Contact Dawei direct at

[email protected]

Flame Ignition Detector

ISSUE ONE 2014


EMISSION ACCOMPLISHED


Servomex Plasma Emission Technology: A leap forward in the measurement of UHP gases

In the field of gas chromatography, many sensors are available that cover a broad range of measurements. �ermal Conductivity (TCD) and Flame Ionisation Detector (FID) sensors have been available for decades and are the most commonly used measurement technologies. However, there is now a new technology available that surpasses their performance, especially when ultra-trace level measurement is required.

FID technology is currently the most widely used sensor for hydrocarbons analysis. This sensor is relatively simple to use, offering a very sensitive, selective and linear measurement, but there are operational disadvantages. A FID sensor uses a flame to burn hydrocarbons, which requires air and costly hydrocarbon-free hydrogen fuel gas to burn. In recent years, stringent health and safety requirements means concerns have also been raised over using flammable pure hydrogen.

Challenged to find a safer alternative to the FID, Servomex’s R&D team undertook extensive research on Servomex’s existing Plasma Emission Detector (PED) technology. Determined to improve the technology’s sensitivity and identify a configuration specific to hydrocarbons while avoiding the use of explosive gases, the research has led to the development of a PED sensor optimised for the trace level analysis of hydrocarbons.

The new Servomex PED sensor offers many advantages over FID technology. The new PED sensor is very sensitive and selective to any molecules containing carbons (organic or inorganic), being up to 10 to 100 times more sensitive than a FID measurement, depending on the carrier gas.

The best FID sensors offering a detection limited between 10 ppb and 20 ppb methane equivalent, a limitation is due to the FID sensor requiring carrier gas, fuel and air to operate – making the sensor more prone to noise from low level hydrocarbon contamination from those different potential sources of contamination. Any hydrocarbons contained in any of these gases are ionised by the sensor, causing drift and noise which limits reliable performance for ultra-trace level measurements.

As the PED sensor requires only a carrier gas, external contamination from air and fuel is removed. While it is still very important to have a clean carrier gas, techniques exist to obtain a clean helium or argon carrier gas with a total impurity level below 1 ppb. In addition, avoiding the use of hydrogen and air reduces ownership cost as less gas is consumed and less purification systems are required.

Figure 1 – PED sensitivity to CH4, CO2 and NMHC

with NanoChrome

Fig. 1 shows a chromatogram obtained with a PED sensor at 5 ppb for CH4, CO2 and NMHC. This chromatogram shows clear sensitivity to hydrocarbons, as well as sensitivity to CO2 achieved without the use of a methaniser which converts CO and CO2 to CH4. While a methaniser is always required to measure CO and CO2 with a FID sensor, it is not required by the PED – improving measurement reliability, avoiding catalyst poisoning risks associated with methanisers and creating a further reduction in cost-of-ownership.

11

Figure 2 – New PED sensitivity step change

ISSUE ONE 2014

2014GUIDE

ANALYZERS BY INDUSTRY

SERVOMEX ANALYZERS

PG19

PG12

PG18

AT THE HEART OF SERVOMEX ARE OUR UNRIVALLED CAPABILITIES IN THE RESEARCH, DESIGN, TESTING AND MANUFACTURE OF SENSOR TECHNOLOGIES.

Our technological expertise has enabled us to develop the outstanding Hummingbird sensor technology on which our reputation is built. Manufactured to the highest quality standards at our industry-leading clean room facilities, Hummingbird technologies are all designed to deliver the same exceptional performance, reliability and accuracy wherever they are partnered.

But nowhere is Hummingbird performance better realised than at the heart of Servomex analyzers, where the potential of this core technology is fully realised through our expert applications knowledge.


Fig. 2 shows a step response using a Servomex NanoChrome analyzer at ppb level, again showing the sensitivity achieved with this new sensor. The achievable limit of detection for CO, CO2, CH4 and NMHC is below 1 ppb.

Fig. 3 shows chromatogram obtained for speciated hydrocarbons analysis, showing the PED sensor’s clear sensitivity to the different hydrocarbons.

There are limitations to using PED technology, most notably the sensitivity of the measurement means it is suitable only for trace analysis applications (<1000 ppm). Due to the nature of the plasma, the sensor also exhibits occasional mild cross interferences due to the sample matrix, which requires more demanding chromatographic methods – as is also sometimes the case with FID technology.

Overall the new PED sensor developed by Servomex has many advantages over the FID technology. The sensor revolutionises the analysis of hydrocarbons, CO and CO2 by improving measurement sensitivity, successfully addressing the safety concerns associated with the use of hydrogen and reducing the cost of ownership.

The new PED sensor is at the heart of the new Servomex NanoChrome analyzer, designed to that measures ultra-trace level of impurities in electronic gases. Integrated alongside the Servomex DF-500 ultra-trace analyzer series and DF-700 moisture analyzer series, Servomex now offers the semiconductor industry a single, complete solution for reliable UHP gas analysis

To find out more about Servomex PED technology and the new SERVOPRO NanoChromevisit www.servomex.com/nanochrome

The analytical sensitivity and reliability of the NanoChrome delivered by the PED technology is enhanced by advanced signal recovery, utilising specially developed adaptive chromatographic filtering methods and ProPeak peak detection techniques for a more sensitive and selective measurement than previously available for UHP gases. By utilising a Direct Analysis Methodology, the NanoChrome removes the doubt associated with measurements made by FID and RGD measurements with the certainty of exceptional measurement accuracy.

Figure 3 – New PED response to hydrocarbons

ISSUE ONE 2014

T E C H N O L O G Y K E Y

Gas Filter Correlation Calorimetry Thermal

Conductivity Infra- RedZirconia Paramagnetic

The SERVOTOUGH range

PRODUC T PRODUC T DETAILS 3 KEY FEATURES

Oxy 1900 AWARD-WINNING DIGITAL O2 ANALYZER

Offering an exceptional range of industry-standard options and three unique, ground-breaking functions, the Servomex SERVOTOUGH Oxy O2 gas analyzer sets new standards of flexibility, stability and reliability from a single, cost-effective unit.

Heated sample cell allowing significantly simplified sample system requirements

Unique Servomex Flowcube flow sensor technology for improved safety

Internal pressure compensation for barometric and process fluctuationsSE

RV

OT

OU

GH

SpectraExact 2500 RUGGED PHOTOMETRIC GAS ANALYZER FOR DEMANDING PROCESS APPLICATIONS

Servomex’s iconic industry-leading photometric analyzer delivers flexible single and multi-component gas analysis capability for corrosive, toxic and flammable sample streams. The SpectraExact’s reliable, accurate and stable real-time online process analysis makes it ideal for a range of process, combustion and emissions gas analysis applications.

Hazardous area certified

Easy integration with DCS – from 4-20mA to Modbus TCP

Sample cell and electronics segregated – for easy maintenance and safe operation

SE

RV

OT

OU

GH

OxyExact 2200 HIGH SPECIFICATION PROCESS O2 ANALYZER

The SERVOTOUGH OxyExact high specification oxygen analyzer offers an unrivalled combination of precision, flexibility and performance for optimum process and safety control. The OxyExact can be configured with a safe or hazardous area control unit with up to six transmitters.

Zone 1 certified to ATEX Cat 2, IECEx and FM/CSA Class 1 Div1

Three enclosure systems allows sampling of any flammable gas up to 100% O2 and pressures of up to 40psi

High temperature version eliminates the need to condense hot sample prior to analysisS

ER

VO

TO

UG

H

REAL-TIME LIGHT HYDROCARBON GAS ANALYZER

A real time optical analyzer utilising the Precisive field proven optical bench, the SERVOTOUGH SpectraScan delivers a breakthrough capability in the continuous analysis of light hydrocarbons C1-C5+.

Tunable band-pass filter enables simultaneous scanning of selected wavelength bands for gases including Methane, Ethane, Propane and, iso-Butane

Unique tunable filter process with IR photometer technology delivers industry-leading interference compensation

Chemometric algorithm provides a permanent span calibration, low cross-interference (<0.2%), linear response and high baseline stability

SpectraScan

SE

RV

OT

OU

GH

12

Tunable Diode Laser Spectroscopy

Flame Ionisation Detector

Gas Chromatography Plasma Laser Moisture Coulometric Spectroscopic

The SERVOTOUGH range


SE

RV

OT

OU

GH

SE

RV

OT

OU

GH

SE

RV

OT

OU

GH

SE

RV

OT

OU

GH

THE WORLD’S MOST ADVANCED FLUEGAS ANALYZER

Designed to measure O2 and combustibles in flue gases for improved combustion efficiency and reduced emissions, the FluegasExact gas analyzer is designed to suit the most demanding needs of combustion efficiency applications in the Power Generation and Process Industries.

Continuous measurement of oxygen and/or combustibles

Unique Flowcube flow sensor technology enables positive flow conditions to be validated

Sulphur resistant combustibles sensor enables sensor to operate at elevated sulphur levels

FluegasExact 2700

HIGH-SENSITIVITY CROSS-STACK TDL ANALYZER

A high performance gas analyzer designed for continuous in-situ monitoring, the LaserSP delivers a fast response time and highly stable performance. Suitable for measuring a range of gases including O2, HCl, HF, NH3, CO, CO2, H2O, H2S, HCN, CH4 and other hydrocarbons, the LaserSP is ideal for a wide range of process, combustion control and emissions applications.

Fast response ideal for control

In-situ with no sample conditioning delivers reliable operation

Wavelength Modulated Spectroscopy provides wide dynamic range and lowest cross interference

LaserSP 2900

EXTRACTIVE TDL TRACE ANALYZER

Specifically designed for extractive trace analysis applications, the LaserExact’s TDL technology offers unsurpassed low ppb detection limits for most gases, making it ideal for the measurement of trace gases offline.

Advanced multipass cell delivers ppb or low ppm detection limits

Innovative PeakLock pattern recognition line tracking eliminates drift over extended operational periods

Stable, drift-free performance reduces calibration to typically once a year

LaserExact 2900

SHORT PATH LENGTH TDL ANALYZER

Optimised for measurement across pipes and along short measurement cells and able to measure through very thin nozzles, reducing or even eliminating consumption of purge gas, the LaserCompact delivers the fast response time, highly stable performance and minimum sample conditioning advantages of TDL technology.

Simplify safety with comprehensive hazardous area approval including flammable sample requirements

Line width correction delivers accurate measurement with variations in matrix

In-situ with low purge gas consumption

LaserCompact 2900

13

SE

RV

OP

RO

DIGITAL MULTIGAS ANALYZER OPTIMISED FOR ASU REQUIREMENTS

Combining industry-leading performance and a range of new and enhanced functions as standard, the MultiExact offers air separation plants a multi-gas analyzer specifically optimised to industry requirements – with GFX and paramagnetic measurements now augmented by Servomex’s revolutionary TCD measurement sensing technology.

TruRef technology offers class leading measurements for Ar, He and N2

mA autoranging functionality, user-definable air point calibration autovalidation and autocalibration functions included as standard

Options include digital communication options and unique Servomex Flowcube flow sensor technology

SE

RV

OP

RO

FLAMMABLE GAS ANALYZER SUITABLE FOR GAS MIXTURES

The SERVOPRO 4210 multigas analyzer is designed to monitor flammable gas samples including H2/CO, ‘HyCO’ or ‘Syngas’ mixtures.

The 4210 offers oxygen control using Servomex’s unique paramagnetic cell, trace measurement of CO, CO2, N2O and CH4 using photometric sensor technology, and IR for measurement of carbon monoxide, carbon dioxide and methane at percent levels.

Measures up to four gases simultaneously

RS232/RS485 and Modbus communications

4210 variant includes stainless steel pipework

SE

RV

OP

RO

DIGITAL SINGLE GAS ANALYZER WITH NEW TCD MEASUREMENTS

The new SERVOPRO MonoExact gas analyzer brings Servomex’s acclaimed TruRef Thermal Conductivity (TCD) technology to ASU operators in a compact, single component analyzer, offering class-leading measurements for Ar, He, N2 and H2.

TruRef offers ASU operators truly industry-leading measurements for drift accuracy, linearity and repeatability

Cost-of-ownership optimised by longer calibration intervals and no reference gas requirements

Single-measurement focus of the MonoExact ideal for ASU operators who keep analyzer measurements separate

SE

RV

OP

RO

MultiExact

4200/4210

MonoExact

MULTIGAS CONTINUOUS EMISSIONS ANALYZER

The SERVOPRO 4900 is specifically designed for the Continuous Emissions Monitoring, where legislation requires the measurement of several gas components in flue gas. The 4900 offers multigas capability for pollutants, greenhouse gases and reference O2, including O2, CO, CO2, NO, SO2, CH4, and N2O.

Low maintenance and cost of ownership

Easy integration with other systems

MCERTS/TÜV approved measurements

4900

ISSUE ONE 2014

The SERVOPRO range





14

SE

RV

OP

RO

SE

RV

OP

RO

SE

RV

OP

RO

SE

RV

OP

RO

VERSATILE TRACE GAS ANALYZER

Offering a unique, non-depleting plasma emission detector, the SERVOPRO Chroma (K4000) analyzer is one of the most versatile gas analyzers for trace gas measurement available. Most applications will be satisfied by a single 4U rack analyzer configuration, making the Chroma a compact, cost effective solution for continuous process control or quality monitoring.

PlasmaHC measurement system requires no FID for THC measurement

Fully automated – tune to the application – system for unique simplicity of use. No need to be an analysis expert to use this GC!

Stand-alone systems requires no third-party software or computer to operate


A Flame Ionization Detector analyzer designed to assure safe operation for cryogenic Air Separation plants, the SERVOPRO FID ensures the level of Total Hydrocarbons (THC) is maintained below flammable limits, as well as providing quality control in pure O2, N2, Ar, Air, He and CO2.

Excellent output resolution over three operating ranges

Electronic flow controllers for air, fuel & sample for no dependency to atmospheric pressure variations and inlet pressure variation

Low fuel consumption ensures low cost of operation

FOR CONTINUOUS MONITORING OF NITROGEN IN ARGON AND HELIUM

Specifically designed for the continuous monitoring of nitrogen in argon or helium or both, the Servomex SERVOPRO Plasma’s unique plasma emission detector provides an accurate, highly stable and reliable measurement ideal for the requirements of ASU plant operators.

Wide measurement range – 0-1ppm, 0-10ppm, 0-100ppm (higher on request)

Electronic flow control system for low flow consumption and reading stability

Patented sample humidity control system for ultimate reading stability

Chroma

FID

Plasma


Incorporating the latest advances in gas sensing technology and signal processing methodology, the new SERVOPRO NanoChrome revolutionises ultra-trace purity measurements for the semiconductor industry.

New PED Sensor technology enables sub-ppb measurement of H2, CH4, CO, CO2 and NMHC

No consumables or fuel gas required

Enables unique total Servomex solution for UHP gas analysis

NanoChrome

The SERVOPRO range





15

ISSUE ONE 2014


the SERVOFLEX range

PORTABLE BENCHTOP ANALYZER FOR MEASURING O2 AND CO2

The only truly portable battery powered gas analyzer with MCERTS certification, the MiniMP is a portable analyzer designed to offer single or dual measurement of O2 and CO2 by utilising Servomex’s advanced paramagnetic and infra-red sensing technologies.

EN15267-3 (MCERTS V3.3, Annex F) makes the MiniMP for source testers that require reference O2 analysis for CEMS verification

Li-ion Ion battery system offers unique true portability

Non-depleting sensor design ensures long service with minimal calibration

MiniMP

SE

RV

OF

LE

X

MP

5100i.s INTRINSICALLY SAFE PORTABLE ANALYZER

Designed for the measurement of toxic and flammable gas samples, the intrinsically safe Micro i.s is a unique analyzer certified to Zone 0 and Zone 1 and suitable for measuring percent levels of O2, CO and CO2.

Intrinsically safe design to ATEX and IEC standards ensures safety operation in hazardous environments

Ergonomic design ensures easy operation on the move

Available in non-pumped or pumped version with optional sample conditioning kit SE

RV

OF

LE

X

Mini Food Pack PORTABLE ANALYZER OPTIMISED FOR MODIFIED ATMOSPHERES PACKAGING

A small sample volume portable benchtop analyzer designed specifically for the checking and quality control of gas mixtures in Modified Atmosphere Packaging (MAP) used in the food and pharmaceutical industries, the Mini Food Pack enables single or dual measurements for percent levels of O2 and CO2.

Range of sampling accessories is available for taking measurement from rigid or flexible pack

Rechargeable battery option enables complete portability for flexible operation

Non-depleting sensor technology maximises availability and reduces maintenance and operating costs

SE

RV

OF

LE

X

MiniHD PORTABLE GAS ANALYZER FOR MEASUREMENT OF COMMON GAS MIXTURES

Designed especially for use in field locations or light industrial applications. The SERVOFLEX MiniHD portable gas analyzer is a rugged, heavy duty analyzer designed to accurately measure the levels of O2, CO and CO2 within common gas mixtures. The MiniHD utilises Servomex’s non-depleting paramagnetic and infra-red sensors to give dependable and accurate results.

Robust IP65 construction meets the demanding needs of field location analysis

Long life Li-ion rechargeable batteries and range of sampling options ensure ease of use

ORSAT validated to meet USFDA performance requirements for verifying medical oxygen USP and nitrogen NF

SE

RV

OF

LE

X




16

the SERVOTOUGH range


DF-300 Series HIGH SENSITIVITY DIGITAL TRACE O2 ANALYZER RANGE

The DF-300 series is a full-featured, microprocessor-based O2 series offering customers superior value and performance. Based around the DF-310 base model, the DF-300 series using Servomex’s unique, non-depleting coulometric E-sensor technology, the DF-340E enables O2 measurements at percent, trace and ultra-trace levels.

Extensive background gas compatibility and flexible configuration options

Variants include CSA hazardous-area approved DF-320E for indoor installation and DF-340E for outdoor installation

Coulometric E-sensor delivers accurate results with no sensor drifting, false low readings or frequent calibration requirements

DE

LT

A-

F

DF-500 Series LEADING ULTRA-TRACE PPT OXYGEN ANALYZER RANGE

Verified by independent experts as measuring oxygen to the lowest PPT levels available, the Delta F Nanotrace analyzer range from Servomex delivers the premium performance in ultra-trace oxygen measurement. Consisting of the DF-550E NanoTrace and DF-560E NanoTrace II, the Nanotrace series delivers exceptional O2 measurements at trace and ultra-trace PPT levels.

The de facto industry standard for the reliable measurement of oxygen in semiconductor manufacture

Fast response and quick upset recovery ensures ultimate performance

Options include flexible configurations and hand carry portable optionD

EL

TA

-F

DF-100 Series VERSATILE O2 ANALYZER RANGE WITH MULTIPLE OPTIONS

An industrial gas analyzer range designed to deliver stable, accurate and reliable O2 measurement at percent and trace levels, the DF-100 series utilises unique, non-depleting E-sensor technology to deliver accurate results with no sensor drifting, no false low readings or no frequent calibration requirements.

Unique non-depleting technology for long term stability and ease of maintenance

Unique measurement stability allowing SPAN calibration only once a year!

Unique Stab-El™ acid gas alarm option neutralises trace contaminants

DE

LT

A-

F

DF-700 Series TDL TRACE MOISTURE ANALYZER RANGE

A sophisticated process moisture analyzer range which offers users the comprehensive solution for trace and ultra-trace moisture measurement, the DF-700 series combines the latest Tunable Diode Laser Absorption Spectroscopy (TDL) technology, a robust measuring cell and a true baseline reference for highly accurate moisture measurement.

Exceptional sub-ppb moisture level readings which exceed current UHP moisture measurement requirements

Models DF-750 NanoTrace (base model); DF-745 (high sensitivity 2ppb LDL); DF-745SG (specialty gas trace moisture analyzer); DF-730 (moisture in HCl); DF-740 (moisture in ammonia); DF-760 dual oxygen and moisture measurement

Second Harmonic detection technology for long life and robustness to particulates contamination

DE

LT

A-

F




17

18

ISSUE ONE 2014

HEALTH CHECKCOMMISSIONING ON-SITE SERVICESUPPORT

SERVICE CENTER SUPPORT

A Servomex Health Check is an ideal solution for customers who require performance and quality validation of their equipment. Choose from a validation at a Service Center, or an on-site visit from an expert engineer who can also provide operator training.

You need reassurance from start-up that your analyzer is delivering optimum performance. A Service Network Start-Up and Commissioning package provides you with one of our highly trained commissioning engineers to ensure you get the best from your investment.

Whether you need urgent assistance with an emergency or are simply due a routine maintenance visit; our Global Network of experienced Service engineers are available to provide prompt and efficient local-for-local on-site support.

Our network of Regional Service Centers are located close to every customer’s installed park, receiving analyzers for the fastest possible turnaround of repairs, preventative maintenance, calibration and analyzer upgrades.

TRAINING SPARES SERVICE CONTRACTS

RENTAL EQUIPMENT

A trained in-house maintenance team can better support the performance of Servomex products, ensuring long term reliability and maximising ROI. Delivered through state of the art training centers in Europe, USA and Asia, our comprehensive training packages deliver our expertise directly to your team.

Access to the right spare parts and consumables is critical in maintaining the operation of your plant. Servomex’s factory authorised spares are of the highest quality and ready to ship whenever you need them, ensuring minimal downtime and the continued long-term efficiency of your equipment.

Regular maintenance can add real value through improved plant reliability, uptime and optimisation. We offer a wide range of maintenance services, from off the shelf packages to fully customised agreements, which include spare parts discounts, pre-scheduled visits, and emergency call outs.

Whether you require the loan of a replacement analyzer during repairs or need to undertake equipment trials, Servomex have an extensive range of products to rent through our Global Network. Long or short term agreements are available.

NINE GREAT PRODUCTSONE GLOBAL SERVICEServomex Service Network provides a comprehensive package of service and support to ensure optimum process performance – wherever you are.

VISIT SERVOMEX.COM/SERVICE OR CONTACT YOUR LOCAL BUSINESS CENTER TODAY

ISSUE ONE 2014

Incorrect gas mixtures and concentrations can compromise your Servomex analyzer. Calibration kits ensure that you have the right gases to support your product.

CALIBRATION KITS

HYDROCARBON PROCESSING HYDROCARBON PROCESSING

HYDROCARBON PROCESSING

SERVOTOUGHLaserSP 2900High sensitivity in-situ or TDL analyzer for combustion, emissions or low oxygen measurements

SERVOTOUGHLaserCompact 2900High sensitivity in-situ TDL analyzer optimised for short path lengths and fast on-line process measurements

DELTA FDF-370EDustproof, waterproof, explosion proof trace O2 measurement for polymer grade feedstocks

SERVOTOUGHSpectraExact 2500Robust process gas infra-red analyzer for percent to ppm measurements

SERVOTOUGHOxy 1900 Award-winning paramagnetic oxygen analyzer suitable for oxidation and inerting applications

SERVOTOUGHOxyExact 2200 High accuracy paramagnetic oxygen analyzer for safety-critical oxidation

SERVOTOUGHFluegasExact 2700High performance fluegas analyzer for O2 and COe combustibles with unique flow diagnostics

ISSUE ONE 2014

2014

THIS PRODUCT GUIDE IS THE EASY WAY TO FIND THE SERVOMEX ANALYZER RELEVANT TO YOU.

Key analyzers have been grouped by industry, with a description of their principle functions and relevant applications.

SERVOTOUGHSpectraScanOn line optical analyzer offering continuous analysis of light hydrocarbons C1-C5+




Gas Chromatography

Plasma

Laser Moisture

Coulometric

Zirconia

Gas Filter Correlation

Calorimetry

Thermal Conductivity

Paramagnetic

Infra-Red

Spectroscopic

CALIBRATION KITS

19

ISSUE ONE 2014

SERVOTOUGHFluegasExact 2700For control combustion in SMR processes

DELTA FDF-320ECertified to measure trace oxygen in H2 in a hazardous area

DELTA FDF-550EUltra-trace ppt oxygen analyzer

DELTA FDF-560ELowest level ultra-trace ppt oxygen analysis available

DELTA FDF-740/745/750High sensitivity PPT and sub-ppb moisture analyzer

SERVOPRO NanoChromeUltra-trace UHP analyzer

DELTA FDF-760EDual sub-ppb oxygen and moisture measurement

SERVOPROMultiExact (O2) Flexible multigas analyzer with oxygen purity and trace measurements

SERVOPRO4100Flexible multigas analyzer meets regional Pharmacopoeia

SERVOPROChromaApplication specific % gas analyzer validates nitrogen purity as per European Pharmacopeia

SERVOPROChroma Flexible sub-ppb LDL gas analyzer for N2 and Ar measurements

SERVOPROChromaTrace measurement ensures quality control

DELTA FDF-150EVersatile oxygen analyzer

MEDICAL GASES

UHP SEMICONDUC TOR MANUFAC TURE

HYDROGEN PRODUC TION

UHP SEMICONDUC TOR MANUFAC TUREMEDICAL GASES

SERVOTOUGHLaserCompactFor O2 control in H2 production by electrolysis

DELTA FDF-310EPremium oxygen analyzer measures trace oxygen in medical grade nitrogen

SERVOFLEXMiniMP 5200Portable analyzer validates purity during transfilling operations

20

SERVOPRO1440Single or dual measurement of O2, CO, CO2 or CH4 – ideal for Source Testers

SERVOPRO4900Continuous emissions analyzer with multiple gas capability

SERVOTOUGHSpectraExact 2500Single or dual component gas analysis for emissions

SERVOPROMultiExact‘Next generation’ digital multigas analyzer

SERVOPRO4100Flexible multigas analyzer with up to four simultaneous measurements

SERVOPRO4210Flammable gas analyzer suitable for specialty gas mixtures

DELTA FDF-745SGTrace moisture analyzer optimised for specialty gas blends production

DELTA FDF-550EUltra-trace PPT oxygen analyzer

DELTA FDF-310EHighly sensitive and versatile trace oxygen analyzer

SERVOTOUGHLaserExactTrace level measurements in pure gases (e.g. CO in H2, NH3 in CO2)

SERVOPROPlasmaFor continuous monitoring of nitrogen in argon and/or helium

SERVOPROFIDTrace hydrocarbon analyzer

SERVOPROChromaVersatile trace gas analyzer

SERVOTOUGH1800Continuous MAP headspace monitoring of O2 level

SERVOPRO4100Multigas analyzer for MAP headspace monitoring of O2 level

SERVOTOUGHLaserSP 2900Monitors wide range of gases in hot, dangerous environments

EMISSIONS MONITORING

SPECIALT Y GASES

SPECIALT Y GASES

SPECIALT Y GASES FOOD & BEVER AGE

21

SERVOTOUGH1800Accurate and stable oxygen analyzer for safe area use

SERVOTOUGHOxy 1900Award-winning intrinsically safe oxygen analyzer

SERVOTOUGHOxy 1900Award-winning paramagnetic O2 oxygen analyzer suitable for hazardous area use

SERVOTOUGHOxyExactHigh specification process oxygen analyzer for hazardous and safe area use

SERVOTOUGHFluegasExact 2700Fluegas combustion gas analyzer

SERVOFLEXMini Food PackFor monitoring Modified Atmosphere Packaging (MAP), including O2 in coffee and CO2 in fresh meat

SPECIALT Y CHEMICALS

FOOD & BEVER AGE

SERVOTOUGHSpectraExact 2500Single or dual component gas analysis for trace analysis of solvents or liquids

SERVOTOUGHLaserCompactFor measurement of H2O in C2H4, Cl2 or HCl in EDC/VCM/chlor-alkali plants

SERVOTOUGHLaserCompactFor measurement of H2O inC2H4, Cl2 or HCl in EDC/VCM/chlor-alkali plants

SERVOTOUGHLaserExactMeasurement of HCl in VCM plants

SPECIALT Y CHEMICALS

SERVOFLEXMicro i.sIntrinsically safe portable gas analyzer

SERVOTOUGHLaserSP 2900Monitors wide range of gases in hot, dangerous environments

SPECIALT Y CHEMICALS IRON & STEEL

SERVOPRO4100Established multigas analyzer ideal for monitoring O2 in air separation processes

SERVOTOUGHLaserSP 2900Leading in-situ TDL combustion analyzer, ideal for O2 analysis in hazardous foundry environments

SERVOPROMultiExactLatest generation digital analyzer ideal for monitoring O2 in air separation processes

IRON & STEEL

Help is at hand. Contact your local business center or visit www.servomex.com

Need ANALYZER ADVICE?

ISSUE ONE 2014

22

SERVOTOUGHLaserSPTDL cross stack combustion analyzer ideal for hot, dangerous environments

SERVOTOUGHFluegasExact 2700Industry-leading fluegas combustion gas analyzer for O2 and/or COe

SERVOPROMultiExactFlexible multigas analyzer with new TruRef TCD technology

SERVOPROMonoExactHalf-rack single measurement TruRef TCD analyzer

SERVOPROMultiExact‘Next generation’ digital multigas analyzer


SERVOPROPlasmaFor continuous measurement of trace N2 in helium

SERVOPROChromaTrace analyzer suitable for monitoring trace impurities in processing high-quality helium gas


SERVOPROPlasmaFor continuous monitoring of nitrogen in argon

SERVOPROFIDTrace hydrocarbon analyzer

DELTA FDF-310EHigh sensitivity digital trace oxygen analyzer

DELTA FDF-150EVersatile oxygen analyzer

SERVOPROChromaMeasures trace N2 in crude Ar, total hydrocarbon and Ar purity

SERVOFLEXMicro i.sIntrinsically safe portable gas analyzer

POWER GENER ATION

AIR SEPAR ATION

AIR SEPAR ATION

HELIUM PRODUC TION

SERVOFLEXMiniMPPortable benchtop analyzer for measuring O2 and CO2

23

WHATEVER YOUR GAS ANALYSIS REQUIREMENTS, WHEREVER YOU ARE:

WE’RE READY TO HELP.GLOBAL BUSINESS CENTERS

LATIN AMERICA BUSINESS CENTER (Empresa do Grupo Spectris)

Rua Laguna 276, Santo Amaro Sao Paulo – SP – Brasil CEP 04728-000

Tel: +55 11 5188 8166 Fax: +55 11 5188 8169 Email: [email protected]

INDIA BUSINESS CENTER

India Business Center and Systems Engineering Spectris Technologies Pvt. Ltd. Plot No.A-168, M.I.D.C. TTC Indl. Area Thane-Belapur Road Khairane Navi Mumbai- 400 7099 India


MIDDLE EAST BUSINESS CENTER

Middle East Business Center Warehouse Q3 – 197 – SAIF Zone PO Box 8962, Sharjah, UAE

Tel: +971 6552 8073 Fax: +971 6552 8074 Email: [email protected]

AMERICAS BUSINESS CENTER

Americas Business, Systems Engineering and Service Center 12300 Dairy Ashford, Suite 400 Sugar Land, TX 77478

USA


ASIA PACIFIC BUSINESS CENTER

Asia Pacific Business, Systems Engineering and Service Center Bldg. 9, Shanghai Euromate Industrial Park No. 88, Yuanshan Road, Xinzhuang Industrial Park Shanghai 201108, P.R. China

Tel: +86 (0)21 6489 7570 Fax: +86 (0)21 6442 6498 Email: [email protected]

EUROPEAN BUSINESS CENTER

European Business Center PO-Box 406 2700 AK Zoetermeer The Netherlands

Tel: +31 (0) 79 330 1580 Toll Free: 00800 7378 6639 (NL, D, GB, F) Fax: +31 (0) 79 342 0819 Email: [email protected]

GLOBAL TECHNICAL CENTERS

UK TECHNICAL CENTER

Servomex Limited UK Technical and Service Center Jarvis Brook, Crowborough East Sussex, TN6 3FB, UK

Tel: +44 (0) 1892 652 181 Fax: +44 (0) 1892 662 253

AMERICAS TECHNICAL CENTER

Servomex Company Inc. Boston Technical and Delta F Service Center 4 Constitution Way Woburn MA 01801 1087, USA

Tel: +1 781 935 4600 USA Toll Free 1 800 433 2552

Fax: +1 781 938 0531 Email: [email protected]

Servomex has a policy of constant product improvement and reserves the right to change specifications without notice. © Servomex Group Limited. 2013. A Spectris company. All rights reserved.

WWW.SERVOMEX.COM

A MEASURABLE ADVANTAGE

Servomex ES Magazine 2014 Issue 1

Documents

Transcript of Servomex ES Magazine 2014 Issue 1