Series 75
-
Upload
lalo-sepulveda -
Category
Documents
-
view
214 -
download
0
Transcript of Series 75
-
8/13/2019 Series 75
1/1
Series 75Manual Pinch Valve
Red Valve Company, Inc. 600 N. Bell Ave., Carnegie, PA 15106 412-279-0044 Fax 412-279-7878 www. redvalve.com
Dimensions Series 75
* Larger sizes available, consult factory.** With optional bevel gear.
*** Higher working pressures available, see Series 9000.
No packing to maintain, ever Same face-to-face as gate, plug or ball valves to 12
Sleeve is the only wetted part, reduces maintenance costs Position indicator, heavy-duty sleeve 100% full-port design Bi-directional, bubble-tight shutoff
The Series 75 manually operated pinch valve is the number-one selling pinch valve in the world today. The Series 75 full
port design eliminates dead spots, crevices, seats and bear-ings where slurry can hang up and impair operation.
The heart of this unique valve is the durable, flexible rubbersleeve which is reinforced with high-strength fabric. Theprinciple of design is very simple; two mechanical pinch barsopen and close the elastomer sleeve. The sleeve, which isthe only part of the valve exposed to the line process, eli-inates maintenance and the need for expensive, exotic bodymaterials. Valve operation will not freeze and operatingtorques remain constant, even if the valve has remained inthe open or closed position for years.
The Series 75 has the same ANSI B16.10 face-to-face asgate, plug or ball valves up to 6. In sizes 8-12, the ANSIB 16.10 face-to-face is available with a reduced port (seeSeries 75S dimensions below).
The Series 75 has excellent control characteristics and canbe used as a throt-tling manual controlvalve. By simplyturning the hand-wheel, operators canfine-tune the valveposition to maintaina constant rate offlow.
Cast iron or aluminum body Sleeves available in Pure Gum Rubber, Neoprene,
Hypalon, Chlorobutyl, Buna-N,EPDM and Viton
Heavy-duty carbon steel mechanism, (optional stainlesssteel stem) position indicator, brass bushing and greasefittings
ANSI Class 125/150 flanges or metric flanges
Materials of ConstructionG
F to F
DD
A F to F
C
B
E
With Optional
Bevel Gear
ValveSizeD*
LengthF-to-F
WidthA
Height
B C
HandwheelDiameter
E G**
WorkingPressure(psi)***
ValveWeight
(lbs)
1 x 1/2
1 x 3/4
1
1-1/2
2
5-1/25-1/25-1/26-1/2
7
6-1/46-1/46-1/4
97-3/4
10-5/810-5/810-5/811-1/214-7/8
333
3-5/84-1/2
6666
12
-----
150150150150150
2020203450
2-1/2
3
4
56
7-1/289
1010-1/2
9-3/49-1/2
10-3/4
1515-1/2
16-9/1616-9/1617-3/8
24-1/424-1/4
4-3/45
5-1/2
7-3/47-7/8
121212
2424
--
18
1818
150150150
150150
628085
1701868
10
12
14
16
18
162024283236
19-3/424-1/2
3537
40-1/251
3436-7/8
4041-1/253-1/254-1/2
9-3/810
11-1/214-1/215-1/216-1/2
242424242424
181818181818
125100100755050
400500650
103012501400
20
24
30
36
42
48
404860728496
40 59 17 36 18 50 1610
CONSULT FACTORY
Dimensions Series 75S
FlangeSize
PortSize
DLengthF-to-F
ValveWeight
(lbs)
81012
68
10
11-1/21314
328442687