Series 14VR - CTSAll testing is performed at room ambient conditions except as noted. Users should...
6
©2021 CTS® Corpora�on. Informa�on/product(s) subject to change. No warranty that product(s) will meet the stated specifica�ons for customer specific applica�ons or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more informa�on, or to request a quote. 2021-03-31 Rev. B Page 1 of 6 Series 14VR 14mm Panel Potentiometer Standard 14mm package size Rota�onal life (15,000 cycles) Wide temperature range (-10°C to +70°C) Dual output with excellent tracking (±2 dB) Variety of standard resistances & tapers Applications Consumer portable electronics Commercial appliances Instrument amplifiers and guitar effects Keyboards and synthesizers Communica�ons equipment Ordering Information Code Spec.** A2 10% Log A3 15% Log B1 linear C3 15% An�log Code Spec. 2 300° Code Spec. X Horizontal/Side Mount Bushingless, PC Pins, 10mm Height H Ver�cal/Rear Mount Thread Bushing, PC Pins K Ver�cal/Rear Mount Sleeve Bushing, PC Pins Y Horizontal/Side Mount Thread Bushing, PC Pins, 10mm Height U Ver�cal/Rear Mount Bushingless, PC Pins Code Spec.* 12 12.5 mm 15 15 mm 17 17.5 mm 20 20 mm 22 22.5 mm 25 25 mm 27 27.5 mm 30 30 mm Code Spec. N No Detent C Center Detent Code Spec. F Fla�ed Code Spec. 502 5kΩ 103 10kΩ 203 20kΩ 503 50kΩ 104 100kΩ 254 250kΩ 504 500kΩ Series Element Terminal Configura�on Sha� Length Sha� Trim Mechanical Travel Detent Op�on Resistance Code Resistance Taper 14VR 2 H 20 F 2 N 103 B1 * See sha� trim op�ons for available lengths. ** Other JIS tapers are available. See charts. Code Spec. 2 Dual
Transcript of Series 14VR - CTSAll testing is performed at room ambient conditions except as noted. Users should...
©2021 CTS® Corporaon. Informaon/product(s) subject to change. No warranty that product(s) will meet the stated specificaons for customer specific applicaons or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more informaon, or to request a quote.
2021-03-31 Rev. B Page 1 of 6
SSeerriieess 1144VVRR1144mmmm PPaanneell PPootteennttiioommeetteerr Standard 14mm package size Rotaonal life (15,000 cycles) Wide temperature range (-10°C to +70°C) Dual output with excellent tracking (±2 dB) Variety of standard resistances & tapers
AApppplliiccaattiioonnss Consumer portable electronics Commercial appliances Instrument amplifiers and guitar effects Keyboards and synthesizers Communicaons equipment
OOrrddeerriinngg IInnffoorrmmaattiioonn
Code Spec.**A2 10% LogA3 15% LogB1 linearC3 15% Anlog
Code Spec.2 300°
Code Spec.
XHorizontal/Side MountBushingless, PC Pins,10mm Height
H Vercal/Rear MountThread Bushing, PC Pins
KVercal/Rear Mount Sleeve Bushing, PC Pins
YHorizontal/Side MountThread Bushing, PC Pins,10mm Height
UVercal/Rear MountBushingless, PC Pins
Code Spec.*12 12.5 mm15 15 mm17 17.5 mm20 20 mm22 22.5 mm25 25 mm27 27.5 mm30 30 mm
Code Spec.N No DetentC Center Detent
Code Spec.F Flaed
Code Spec.502 5kΩ103 10kΩ203 20kΩ503 50kΩ104 100kΩ254 250kΩ504 500kΩ
Series Element TerminalConfiguraon
ShaLength
ShaTrim
MechanicalTravel
DetentOpon
ResistanceCode
ResistanceTaper
14VR 2 H 20 F 2 N 103 B1
* See sha trim opons for available lengths.** Other JIS tapers are available. See charts.
Code Spec.2 Dual
©2021 CTS® Corporaon. Informaon/product(s) subject to change. No warranty that product(s) will meet the stated specificaons for customer specific applicaons or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more informaon, or to request a quote.
Series 14VR14mm Panel Potenometer
2021-03-31 Rev. B Page 2 of 6
EElleeccttrriiccaall SSppeecciiffiiccaattiioonnssMMiinn TTyyppiiccaall MMaaxx UUnniitt
TToottaall RReessiissttaannccee TToolleerraannccee -20 – +20 %PPoowweerr RRaattiinngg – +0.05 – waOOppeerraattiinngg VVoollttaaggee – – +50 VACRReessiidduuaall RReessiissttaannccee – – +30 ΩSSlliiddeerr NNooiissee – – +100 mVTTrraacckkiinngg EErrrroorr -2 – +2 dBIInnssuullaattiioonn RReessiissttaannccee 250 VDC for 1 min. +100 MΩDDiieelleeccttrriicc SSttrreennggtthh 300 VAC for 1 min. no arcingTTaappeerr Linear and audio opons (see charts)
MMeecchhaanniiccaallTToottaall MMeecchhaanniiccaall TTrraavveell 300° ± 5°OOppeerraattiinngg TToorrqquuee 30 to 200 gf-cmSShhaafftt WWoobbbbllee BBuusshhiinngglleessss WWiitthh BBuusshhiinngg
0.7 x L/20mm p-p max.; L = Sha Length0.7 x L/30mm p-p max.; L = Sha Length
SShhaafftt PPuusshh--PPuullll SSttrreennggtthh 8 kgf for 3 sec.SSttoopp SSttrreennggtthh 5 kgf-cm min.DDeetteenntt PPoossiittiioonn 150° ± 5°DDeetteenntt TToorrqquuee 30 to 300 gf-cmRRoottaattiioonnaall LLiiffee 15,000 cyclesPPaanneell NNuutt TTiigghhtteenniinngg TToorrqquuee 10 kgf-cmIIPP RRaattiinngg 40MMoouunnttiinngg HHaarrddwwaarree One flat washer and one mounng hex nut supplied with bushing oponPPaacckkaaggiinngg TrayWWeeiigghhtt 3 grams
EEnnvviirroonnmmeennttaallMMiinn TTyyppiiccaall MMaaxx UUnniitt
OOppeerraattiinngg TTeemmppeerraattuurree -10 – +70 °CSSttoorraaggee TTeemmppeerraattuurree -30 – +70 °CSSoollddeerriinngg CCoonnddiittiioonnss WWaavvee SSoollddeerr
MMaannuuaall SSoollddeerr WWaasshh
Preheat: 100°C max for 2 min max; Solder temperature: 260°C ± 5°C for 5 sec max.;No clean foam flux recommended350°C ± 5°C for 3 sec max.; Sn95Ag5 no clean solderNot recommended
MMooiissttuurree SSeennssiittiivviittyy LLeevveell 1EESSDD CCllaassssiiffiiccaattiioonn ((HHBBMM)) Not applicable
All tesng is performed at room ambient condions except as noted. Users should verify device actual performance in their specific applicaonsThis product is compliant to RoHS3 Direcve 2015/863 Amendments of Annex II on 31 March 2015, and REACH SVHC Direcve EC 1907/2006 Amendments of
Annex XIV & Annex XVII on 15 January 2018.Custom and value-added opons available on request. Please contact your sales representave for addional informaon.
©2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Series 14VR
14mm Panel Potentiometer
2021-03-31 Rev. B Page 3 of 6
Available Shaft Trim Combinations by Terminal Configuration And Shaft Length
Shaft Length Options
Shaft Trim Flatted
14VR2X 12.5 mm
15 mm •
17.5 mm
20 mm •
22.5 mm •
25 mm •
27.5 mm •
30 mm •
14VR2H 12.5 mm •
15 mm •
17.5 mm •
20 mm •
22.5 mm •
25 mm •
27.5 mm
30 mm •
14VR2K 12.5 mm
15 mm
17.5 mm
20 mm •
22.5 mm •
25 mm •
27.5 mm •
30 mm •
14VR2Y 12.5 mm •
15 mm •
17.5 mm •
20 mm •
22.5 mm •
25 mm •
27.5 mm
30 mm •
14VR2U 12.5 mm
15 mm •
17.5 mm
20 mm •
22.5 mm •
25 mm •
27.5 mm •
30 mm •
©2021 CTS® Corporaon. Informaon/product(s) subject to change. No warranty that product(s) will meet the stated specificaons for customer specific applicaons or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more informaon, or to request a quote.
Series 14VR14mm Panel Potenometer
2021-03-31 Rev. B Page 4 of 6
MMeecchhaanniiccaall SSppeecciiffiiccaattiioonnssSeries 14VR Horizontal/Side Mount Bushingless
Series 14VR Vercal/Rear Mount Bushingless
Unit: mm
©2021 CTS® Corporaon. Informaon/product(s) subject to change. No warranty that product(s) will meet the stated specificaons for customer specific applicaons or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more informaon, or to request a quote.
Series 14VR14mm Panel Potenometer
2021-03-31 Rev. B Page 5 of 6
MMeecchhaanniiccaall SSppeecciiffiiccaattiioonnssSeries 14VR Horizontal/Side Mount with Threaded Bushing
Series 14VR Vercal/Rear Mount with Threaded Bushing
Unit: mm
©2021 CTS® Corporaon. Informaon/product(s) subject to change. No warranty that product(s) will meet the stated specificaons for customer specific applicaons or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more informaon, or to request a quote.
Series 14VR14mm Panel Potenometer
2021-03-31 Rev. B Page 6 of 6
MMeecchhaanniiccaall SSppeecciiffiiccaattiioonnssSeries 14VR Vercal/Rear Mount with Sleeve Bushing
EElleeccttrriiccaall SSppeecciiffiiccaattiioonnSeries 14VR Taper Graphs
Unit: mm
