SEQ. #770-819 EXCAVATORS August, 2019 E-95 Excavators … · 2020-02-26 · SEQ. #770-819 E-95...
Transcript of SEQ. #770-819 EXCAVATORS August, 2019 E-95 Excavators … · 2020-02-26 · SEQ. #770-819 E-95...
SEQ. #770-819 E-95 Excavators
EXCAVATORSDISCOUNT OFF LIST
PRICING INFOSPECIFICATION 5.0
August, 2019
Vendor Name: Titan Machinery IncContact Person: Andy BethelStreet Address: 644 East Beaton DriveP.O. Box:City, State, Zip West Fargo, ND Phone #: 952-445-5400Toll Free #: 800-795-9274Email Address: [email protected]
Spec Number Information Requested Answer
5.1 MANUFACTURER Case
5.2 DATE AND ID. OF PRICE LIST Compact Exc C-Series6/28/2019
5.3 PERCENTAGE DISCOUNT FROM PRICE LISTFactory Supplied Attachments may incur installation charges.
CX17C - CX26C 26.00%CX30C - CX33C - CX37C 27.00%
CX57C - CX60C 28.50%
5.4 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price N/A
5.5 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
CX17C Hourly Rental Rate: N/AWeekly Rental Rate: 715.00$ Monthly Rental Rate: 1,760.00$
Percent (%) of Rental Fee applied to purchase price: 80% first 90 days
CX26C Hourly Rental Rate: N/AWeekly Rental Rate: 750.00$ Monthly Rental Rate: 1,825.00$
Percent (%) of Rental Fee applied to purchase price: 80% first 90 days
CX30C Hourly Rental Rate: N/AWeekly Rental Rate: 900.00$ Monthly Rental Rate: 2,250.00$
Percent (%) of Rental Fee applied to purchase price: 80% first 90 days
CX33C - CX37C Hourly Rental Rate: N/AWeekly Rental Rate: 926.00$ Monthly Rental Rate: 2,350.00$
Percent (%) of Rental Fee applied to purchase price: 80% first 90 days
CX57C - CX60C Hourly Rental Rate: N/AWeekly Rental Rate: 1,038.00$ Monthly Rental Rate: 2,600.00$
Percent (%) of Rental Fee applied to purchase price: 80% first 90 days
N/A
5.6 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS
DELIVERY STARTING POINT - City, State, Zip code Nearest Titan Machinery Inc. Below
If the new rental equipment is purchased and finance charges are applicable for theactual rental term only, state the actual interest rate here:
SEQ. #770-819 E-95 Excavators
EXCAVATORSDISCOUNT OFF LIST
PRICING INFOSPECIFICATION 5.0
August, 2019
Shakopee, MN 55379Fargo, ND 54108Crookston, MN 56716Hermantown, MN 55811Rogers, MN 55374Marshall, MN 56258Sioux Falls, SD 57104La Crosse, WI 54601
PRICE PER LOADED MILE 4.00$ MINIMUM DELIVERY CHARGE (if applicable) 250.00$
5.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options. Add as many extra lines as you need. (Specify years, miles or hours extended term covers.)
36 months 3,000 hrsPremier 715.00$
Power Train & Hydraulics 576.00$ Power Train Only 352.00$
48 months 4,000 hrsPremier 928.00$
Power Train & Hydraulics 773.00$ Power Train Only 433.00$
60 months 5,000 hrsPremier 2,015.00$
Power Train & Hydraulics 1,580.00$ Power Train Only 966.00$
5.8 HOURLY SHOP RATE(Installation services may be requested on an "as needed" basis) 132.50$
5.9 PRICE FOR ADDITIONAL MANUALS (1 of each included at no cost, per specs)ADDITIONAL SERVICE MANUAL
Digital INCPaper 1,000.00$
ADDITIONAL PARTS MANUAL Digital INCPaper 500.00$
PRICE FOR ADDITIONAL OPERATIONS MANUAL Digital INCPaper 150.00$
5.10 DISCOUNT OFF LIST PRICE FOR RELATED PARTS & ACCESSORIES Attachments might incur installation charges
Case Attachments - Excludes Hammers 15%Case Attachments - Hammers only 25%
Kent Hammers size FX125 and Smaller 25%Kent Hammers size FX175 and Larger 20%
Kent Compactor Pricing 5%
FAE Pricing 10%
Werk-Brau 15%
Woods 10%
SEQ. #770-819 E-95 Excavators
EXCAVATORSDISCOUNT OFF LIST
PRICING INFOSPECIFICATION 5.0
August, 2019
Vendor Name: Titan Machinery IncContact Person: Andy BethelStreet Address: 644 East Beaton DriveP.O. Box:City, State, Zip West Fargo, ND Phone #: 952-445-5400Toll Free #: 800-795-9274Email Address: [email protected]
Spec Number Information Requested Answer
5.1 MANUFACTURER Case
5.2 DATE AND ID. OF PRICE LIST Exc CX75-CX80 andD-Series
10/11/2019
5.3 PERCENTAGE DISCOUNT FROM PRICE LISTFactory Supplied Attachments may incur installation charges.
CX75C - CX80C 32.00%CX130D - CX350D LR 33.00%
5.4 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price N/A
5.5 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
CX75C - CX80C Hourly Rental Rate: N/AWeekly Rental Rate: 1,450.00$ Monthly Rental Rate: 3,515.00$
Percent (%) of Rental Fee applied to purchase price: 80% first 90 days
CX130D Hourly Rental Rate: N/AWeekly Rental Rate: 1,685.00$ Monthly Rental Rate: 4,475.00$
Percent (%) of Rental Fee applied to purchase price: 80% first 90 days
CX135D Hourly Rental Rate: N/AWeekly Rental Rate: 1,778.00$ Monthly Rental Rate: 4,608.00$
Percent (%) of Rental Fee applied to purchase price: 80% first 90 days
CX160D Hourly Rental Rate: N/AWeekly Rental Rate: 1,963.00$ Monthly Rental Rate: 5,515.00$
Percent (%) of Rental Fee applied to purchase price: 80% first 90 days
CX210D Hourly Rental Rate: N/AWeekly Rental Rate: 2,350.00$ Monthly Rental Rate: 6,550.00$
Percent (%) of Rental Fee applied to purchase price: 80% first 90 days
CX210D LR Hourly Rental Rate: N/AWeekly Rental Rate: 3,519.00$ Monthly Rental Rate: 9,500.00$
Percent (%) of Rental Fee applied to purchase price: 80% first 90 days
CX245D Hourly Rental Rate: N/AWeekly Rental Rate: 2,778.00$ Monthly Rental Rate: 7,500.00$
SEQ. #770-819 E-95 Excavators
EXCAVATORSDISCOUNT OFF LIST
PRICING INFOSPECIFICATION 5.0
August, 2019
Percent (%) of Rental Fee applied to purchase price: 80% first 90 days
CX250D Hourly Rental Rate: N/AWeekly Rental Rate: 2,704.00$ Monthly Rental Rate: 7,300.00$
Percent (%) of Rental Fee applied to purchase price: 80% first 90 days
CX250D LR Hourly Rental Rate: N/AWeekly Rental Rate: 4,260.00$ Monthly Rental Rate: 11,500.00$
Percent (%) of Rental Fee applied to purchase price: 80% first 90 days
CX290D - CX300D Hourly Rental Rate: N/AWeekly Rental Rate: 3,534.00$ Monthly Rental Rate: 9,500.00$
Percent (%) of Rental Fee applied to purchase price: 80% first 90 days
CX350D Hourly Rental Rate: N/AWeekly Rental Rate: 3,889.00$ Monthly Rental Rate: 10,500.00$
Percent (%) of Rental Fee applied to purchase price: 80% first 90 days
N/A
5.6 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS
DELIVERY STARTING POINT - City, State, Zip code Nearest Titan Machinery Inc. BelowShakopee, MN 55379Fargo, ND 54108Crookston, MN 56716Hermantown, MN 55811Rogers, MN 55374Marshall, MN 56258Sioux Falls, SD 57104La Crosse, WI 54601
PRICE PER LOADED MILE 4.00$ MINIMUM DELIVERY CHARGE (if applicable) 250.00$
5.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options. Add as many extra lines as you need. (Specify years, miles or hours extended term covers.)
CX75C - CX80C24 months 2,000 hrs
Premier 554.00$ Power Train & Hydraulics 337.00$
Power Train Only 224.00$ 36 months 3,000 hrs
Premier 1,073.00$ Power Train & Hydraulics 898.00$
Power Train Only 599.00$ 48 month 4,000 hrs
Premier 1,937.00$ Power Train & Hydraulics 1,471.00$
Power Train Only 975.00$ 60 months 5,000 hrs
Premier 3,154.00$ Power Train & Hydraulics 2,727.00$
Power Train Only 1,873.00$
If the new rental equipment is purchased and finance charges are applicable for theactual rental term only, state the actual interest rate here:
SEQ. #770-819 E-95 Excavators
EXCAVATORSDISCOUNT OFF LIST
PRICING INFOSPECIFICATION 5.0
August, 2019
CX130D - CX145D48 months 3,000 hrs
Premier 825.00$ Power Train & Hydraulics 535.00$
Power Train Only 348.00$ 48 months 4,000 hrs
Premier 1,178.00$ Power Train & Hydraulics 763.00$
Power Train Only 497.00$ 60 months 4,000 hrs
Premier 1,592.00$ Power Train & Hydraulics 1,032.00$
Power Train Only 671.00$ 60 months 5,000 hrs
Premier 2,076.00$ Power Train & Hydraulics 1,345.00$
Power Train Only 874.00$
CX160D - CX210D - CX245D - CX250D48 months 3,000 hrs
Premier 1,410.00$ Power Train & Hydraulics 915.00$
Power Train Only 595.00$ 48 months 4,000 hrs
Premier 2,015.00$ Power Train & Hydraulics 1,306.00$
Power Train Only 849.00$ 60 months 4,000 hrs
Premier 2,433.00$ Power Train & Hydraulics 1,577.00$
Power Train Only 1,025.00$ 60 months 5,000 hrs
Premier 3,561.00$ Power Train & Hydraulics 2,307.00$
Power Train Only 1,500.00$
CX290D - CX300D - CX350D48 months 3,000 hrs
Premier 1,940.00$ Power Train & Hydraulics 1,258.00$
Power Train Only 817.00$ 48 months 4,000 hrs
Premier 2,772.00$ Power Train & Hydraulics 1,796.00$
Power Train Only 1,168.00$ 60 months 4,000 hrs
Premier 3,346.00$ Power Train & Hydraulics 2,168.00$
Power Train Only 1,409.00$ 60 months 5,000 hrs
Premier 4,896.00$ Power Train & Hydraulics 3,172.00$
Power Train Only 2,062.00$
SEQ. #770-819 E-95 Excavators
EXCAVATORSDISCOUNT OFF LIST
PRICING INFOSPECIFICATION 5.0
August, 2019
5.8 HOURLY SHOP RATE(Installation services may be requested on an "as needed" basis) 132.50$
5.9 PRICE FOR ADDITIONAL MANUALS (1 of each included at no cost, per specs)ADDITIONAL SERVICE MANUAL
Digital INCPaper 1,500.00$
ADDITIONAL PARTS MANUAL Digital INCPaper 500.00$
PRICE FOR ADDITIONAL OPERATIONS MANUAL Digital INCPaper 150.00$
5.10 DISCOUNT OFF LIST PRICE FOR RELATED PARTS & ACCESSORIES Attachments might incur installation charges
Case Attachments - Excludes Hammers 15%Case Attachments - Hammers only 25%
Kent Hammers size FX125 and Smaller 25%Kent Hammers size FX175 and Larger 20%
Kent Compactor Pricing 5%
FAE Pricing 10%
Werk-Brau 15%
Woods 10%
SWIFT EVENT TITLE & NUMBER: EXCAVATORS AND RELATED PARTS AND ATTACHMENTS E-95(5) G0210-000009806
** Following is a list of all distributors that are authorized to sell the contract equipment listed in the above solicitation.
** SWIFT Vendor Numbers: Provide the Swift Vendor Number (SWIFT ID) and Location Code (LOC CODE) for each Authorized Distributor. Each Authorized Distributor must have an accurate SWIFT ID.
** INSURANCE: All distributors MUST provide the required insurance certificates to the State as outline in the Swift Event Special Terms and Conditinos before any State Contract may be executed.
COMPANY NAME SWIFT ID LOC CODE COMPANY ADDRESS ST /ZIP PHONE CONTACT NAMETitan Machinery Inc. 251892 18 6340 County Road 101 E, Shakopee MN, 55379 952-445-5400 Ben PiasTitan Machinery Inc. 251892 6 4001 38th Street SW, Fargo ND, 54108 701-237-3333 Lee MengeTitan Machinery Inc. 251892 10 500 Ingersoll Ave, Crookston MN, 56716 218-281-4668 Mike MertenTitan Machinery Inc. 251892 19 4311 Haines Road, Hermantown MN, 55811 218-727-3038 Ben PiasTitan Machinery Inc. 251892 17 14375 James Road, Rogers MN, 55374 763-428-5099 Ben PiasTitan Machinery Inc. 251892 2 1201 North Hwy 59, Marshall MN, 56258 507-532-5783 Lucas HilgemannTitan Machinery Inc. 251892 5 4400W 62nd St N. Sioux Falls SD, 57104 605-336-3434 Matt LeightonTitan Machinery Inc. 251892 20 N 1626 Wuensch Road, La Crosse WI, 54601 608-788-1025 Don Benz
Titan MachineryCase Compact Excavators C-Series
June 28, 2019
SD_47181 OPERATOR'S MANUAL
SD_10181 CRAWLER TYPE
SD_30180 TRAVEL ALARM
SD_40003 COUNTERWEIGHT
SD_X5406 1ST AUX HYD TWO WAYS
SD_X6100 ARM
SD_X6207 HYDR Q/C PROV.
SD_X6210 BEACON
Factory Supplied Attachments
KLAC Buckets & Coupler
Pin-On/Mech. Buckets & Coupler
$1,535.00
48057610 Dead Pin Kit (for additional buckets)Required when ordering more than 1 bucket with a Pin-Grabber Coupler
5 LB $159.00
48057605 10"HD Bucket (Pin-on/Mechanical Coupler) 79 LB $357.0048057606 12"HD Bucket (Pin-on/Mechanical Coupler) 86 LB $384.0048057607 16"HD Bucket (Pin-on/Mechanical Coupler) 97 LB $437.0048057608 18"HD Bucket (Pin-on/Mechanical Coupler) 106 LB $505.0048057609 QUICK-HITCH
(Only compatible with C-Series buckets)Includes 1 set of dead pins for installation into a single bucket
29 LB
47422588 16" HD Bucket (KLAC Coupler) 106 LB $587.0047422589 18" HD Bucket (KLAC Coupler) 117 LB $655.0047422602 KLAC Base Plate (To adapt other buckets) 11 LB $237.0048057632 QUICK-HITCH
(Compatible with both the B/C-Series KLAC buckets)13 LB $848.00
747070 Beacon $280.00CX17C CANOPY US PRICE LIST
Order Code Description Weight Factory Data List Price
47422586 10" HD Bucket (KLAC Coupler) 88 LB $507.0047422587 12" HD Bucket (KLAC Coupler) 95 LB $534.00
747329 Long Arm - 747329Long arm increases dig depth, resulting in a reduction in arm digging forces & lift capacity.
$327.00
747065 W/O Q/C Provision No Charge747064 Hydraulic Q/C Provision
Includes switch & hydraulic lines to end of arm$500.00
XX6210X W/O Beacon No Charge
747996 Additional Counterweight.Additional Bolt-on weight adds 180 lb (82 kg)
$146.00
747054 2Way Aux Pedal Proportional No Charge747055 2Way Aux Joystick Proportional No Charge
747320 Short Arm - 747320 No Charge
9552700 Rubber TracksOne-piece molded rubber belt track w/ a steel cable core. The entire track must be replaced at time of service. Select this track for general use on soils & hard surfaces.
No Charge
ADDITIONAL EQUIPMENT MEX
747994 W/O Travel Alarm No Charge747453 Travel Alarm $166.00
747995 Standard Counterweight. No Charge
OPERATOR'S MANUAL
747480 Operators Manual - English No Charge747961 Operators Manual - French No Charge747464 Operators Manual- Spanish No Charge
VERSION
CX17C CANOPY US PRICE LIST
COMMERCIAL MODEL TECHNICAL TYPE Weight Factory Data List PriceCX17C CANOPY 698891711 3,910 LBS. $34,885.00
CX17C CANOPY US PRICE LIST
Order Code Description Weight Factory Data List Price
1 of 19
Titan MachineryCase Compact Excavators C-Series
June 28, 2019
SD_47181 OPERATOR'S MANUAL
SD_10181 CRAWLER TYPE
SD_30180 TRAVEL ALARM
SD_40003 COUNTERWEIGHT
SD_X5405 2ND AUX. CIRCUIT
SD_X5406 1ST AUX HYD TWO WAYS
SD_X5430 THUMB CYL BRACKET
SD_X6100 ARM
SD_X6206 LINKAGE
SD_X6207 HYDR Q/C PROV.
SD_X6210 BEACONXX6210X W/O Beacon No Charge747070 Beacon $280.00
747062 Linkage With Hook No Charge747063 Linkage Without Hook ($61.00)
747065 W/O Q/C Provision No Charge747064 Hydraulic Q/C Provision
Includes switch & hydraulic lines to end of arm$500.00
747059 W/O Thumb Bracket No Charge747058 Thumb Bracket $443.00
747320 Short Arm - 747320 No Charge
747329 Long Arm - 747329Long arm increases dig depth, resulting in a reduction in arm digging forces & lift capacity.
$327.00
747999 W/O 2nd Aux 2-Way Proportional No Charge747053 2nd Aux 2-Way Proportional
CX37C - if ordering Angle Blade - 2nd 2-way Aux is used for the angle circuit. Cannot order 747053 with 7479814-way Angle Blade.NOTE: 2nd Aux INCLUDES 1st Aux hose options.
$1,633.00
747054 2Way Aux Pedal Proportional No Charge747055 2Way Aux Joystick Proportional No Charge
747994 W/O Travel Alarm No Charge747453 Travel Alarm $207.00
747995 Standard Counterweight. No Charge747996 Additional Counterweight.
Additional bolt on weight adds 286 lb (130 kg) - CX26C Additional bolt on weight adds 330 lb (150 kg) - CX37C CX37C - Add. Cwt comes w/ Angle Blade
$206.00
747961 Operators Manual - French No Charge747464 Operators Manual- Spanish No Charge
VERSION
9552700 Rubber TracksOne-piece molded rubber belt track w/ a steel cable core. The entire track must be replaced at time of service. Select this track for general use on soils & hard surfaces.
No Charge
ADDITIONAL EQUIPMENT MEX
CX26C CANOPY US PRICE LIST
Order Code Description Weight Factory Data List PriceOPERATOR'S MANUAL
747480 Operators Manual - English No Charge
CX26C CANOPY US PRICE LIST
COMMERCIAL MODEL Weight Factory Data List PriceCX26C CANOPY 5,520 LBS. $41,575.00
2 of 19
Titan MachineryCase Compact Excavators C-Series
June 28, 2019
Factory Supplied Attachments
KLAC Buckets & Coupler
Pin-On Buckets & Coupler
Thumbs
47457879 Dead Pin KitRequired when ordering more than 1 bucket with a Pin- Grabber Coupler
8 LB $177.00
48058019 Thumb Kit, Hyd.,Short Tines(Use with direct fit, KLAC buckets and Mechanical Pin-Grabber coupler)
150 LB $2,248.00
48094114 Thumb Kit, Hyd.,Long Tines(Use w/Hyd. Pin-Grabber coupler only)
150 LB $2,248.00
48057612 18"HD Bucket (Mech/Hyd Coupler) 70,000G
$623.00
48057613 24"HD Bucket (Mech/Hyd Coupler) 185 LB $797.0048057615 Coupler, Mechanical Pin-Grabber
(Only compatible with the C-Series bucket)Includes 1 set of dead pins for installation into a single bucket
95 LB $1,538.00
48094307 Coupler,Hydraulic Pin-Grabber(Compatible with both the B/C-Series buckets, when used with a B-Series bucket, it requires the removal of the spacer plates) Includes 1 set of dead pins for installation into a single bucket
48094117 18"HD Bucket (KLAC Coupler) 176 LB $625.00
99 LB $3,386.00
48094118 24"HD Bucket (KLAC Coupler) 209 LB $800.0048057633 Coupler, KLAC 71 LB $1,102.0047422632 KLAC Base Plate (To adapt other buckets) 20 LB $285.00
48057611 12"HD Bucket (Mech/Hyd Coupler) 121 LB $521.00
CX26C CANOPY US PRICE LIST
Order Code Description Weight Factory Data List Price
48094116 12"HD Bucket (KLAC Coupler) 143 LB $524.00
3 of 19
Titan MachineryCase Compact Excavators C-Series
June 28, 2019
SD_47181 OPERATOR'S MANUAL
SD_10181 CRAWLER TYPE
SD_30180 TRAVEL ALARM
SD_40003 COUNTERWEIGHT
SD_X5405 2ND AUX. CIRCUIT
SD_X5406 1ST AUX HYD TWO WAYS
SD_X5430 THUMB CYL BRACKET
SD_X6100 ARM
SD_X6206 LINKAGE
SD_X6207 HYDR Q/C PROV.
SD_X6210 BEACONXX6210X W/O Beacon No Charge747070 Beacon $280.00
747062 Linkage With Hook No Charge747063 Linkage Without Hook ($61.00)
747065 W/O Q/C Provision No Charge747064 Hydraulic Q/C Provision
Includes switch & hydraulic lines to end of arm$500.00
747059 W/O Thumb Bracket No Charge747058 Thumb Bracket $443.00
747320 Short Arm - 747320 No Charge
747329 Long Arm - 747329Long arm increases dig depth, resulting in a reduction in arm digging forces & lift capacity.
$327.00
747999 W/O 2nd Aux 2-Way Proportional No Charge747053 2nd Aux 2-Way Proportional
CX37C - if ordering Angle Blade - 2nd 2-way Aux is used for the angle circuit. Cannot order 747053 with 7479814-way Angle Blade.NOTE: 2nd Aux INCLUDES 1st Aux hose options.
$1,633.00
747054 2Way Aux Pedal Proportional No Charge747055 2Way Aux Joystick Proportional No Charge
747994 W/O Travel Alarm No Charge747453 Travel Alarm $207.00
747995 Standard Counterweight. No Charge747996 Additional Counterweight.
Additional bolt on weight adds 286 lb (130 kg) - CX26C Additional bolt on weight adds 330 lb (150 kg) - CX37C CX37C - Add. Cwt comes w/ Angle Blade
$206.00
747961 Operators Manual - French No Charge747464 Operators Manual- Spanish No Charge
VERSION
9552700 Rubber TracksOne-piece molded rubber belt track w/ a steel cable core. The entire track must be replaced at time of service. Select this track for general use on soils & hard surfaces.
No Charge
ADDITIONAL EQUIPMENT MEX
CX26C CAB US PRICE LIST
Order Code Description Weight Factory Data List PriceOPERATOR'S MANUAL
747480 Operators Manual - English No Charge
CX26C CAB US PRICE LIST
COMMERCIAL MODEL Weight Factory Data List PriceCX26C CAB 5,850 LBS. $47,535.00
4 of 19
Titan MachineryCase Compact Excavators C-Series
June 28, 2019
Factory Supplied Attachments
KLAC Buckets & Coupler
Pin-On Buckets & Coupler
Thumbs
48094307 Coupler,Hydraulic Pin-Grabber(Compatible with both the B/C-Series buckets, when used with a B-Series bucket, it requires the removal of the spacer plates) Includes 1 set of dead pins for installation into a single bucket
99 LB $3,386.00
47457879 Dead Pin KitRequired when ordering more than 1 bucket with a Pin- Grabber Coupler
8 LB $177.00
48058019 Thumb Kit, Hyd.,Short Tines(Use with direct fit, KLAC buckets and Mechanical Pin-Grabber coupler)
150 LB $2,248.00
48094114 Thumb Kit, Hyd., Long Tines(Use w/Hyd. Pin-Grabber coupler only)
150 LB $2,248.00
48057611 12"HD Bucket (Mech/Hyd Coupler) 121 LB $521.0048057612 18"HD Bucket (Mech/Hyd Coupler) 70,000
G$623.00
48057613 24"HD Bucket (Mech/Hyd Coupler) 185 LB $797.0048057615 Coupler, Mechanical Pin-Grabber
(Only compatible with the C-Series bucket)Includes 1 set of dead pins for installation into a single bucket
95 LB $1,538.00
48094117 18"HD Bucket (KLAC Coupler) 176 LB $625.0048094118 24"HD Bucket (KLAC Coupler) 209 LB $800.0048057633 Coupler, KLAC 71 LB $1,102.0047422632 KLAC Base Plate (To adapt other buckets) 20 LB $285.00
CX26C CAB US PRICE LIST
Order Code Description Weight Factory Data List Price
48094116 12"HD Bucket (KLAC Coupler) 143 LB $524.00
5 of 19
Titan MachineryCase Compact Excavators C-Series
June 28, 2019
SD_47181 OPERATOR'S MANUAL
SD_10181 CRAWLER TYPE
SD_30180 TRAVEL ALARM
SD_X5405 2ND AUX. CIRCUIT
SD_X5406 1ST AUX HYD TWO WAYS
SD_X5430 THUMB CYL BRACKET
SD_X6100 ARM
SD_X6206 LINKAGE
SD_X6207 HYDR Q/C PROV.
SD_X6210 BEACONXX6210X W/O Beacon No Charge747070 Beacon $280.00
747062 Linkage With Hook No Charge747063 Linkage Without Hook ($61.00)
747065 W/O Q/C Provision No Charge747064 Hydraulic Q/C Provision
Includes switch & hydraulic lines to end of arm$500.00
747055 2Way Aux Joystick Proportional No Charge
747059 W/O Thumb Bracket No Charge747058 Thumb Bracket $443.00
747320 Short Arm - 747320 No Charge
747453 Travel Alarm $207.00
747999 W/O 2nd Aux 2-Way Proportional No Charge747053 2nd Aux 2-Way Proportional
CX37C - if ordering Angle Blade - 2nd 2-way Aux is used for the angle circuit. Cannot order 747053 with 7479814-way Angle Blade.NOTE: 2nd Aux INCLUDES 1st Aux hose options.
$1,633.00
747054 2Way Aux Pedal Proportional No Charge
747464 Operators Manual- Spanish No ChargeVERSION
9552700 Rubber TracksOne-piece molded rubber belt track w/ a steel cable core. The entire track must be replaced at time of service. Select this track for general use on soils & hard surfaces.
No Charge
ADDITIONAL EQUIPMENT MEX
747994 W/O Travel Alarm No Charge
CX30C CANOPY US PRICE LIST
Order Code Description Weight Factory Data List PriceOPERATOR'S MANUAL
747480 Operators Manual - English No Charge747961 Operators Manual - French No Charge
CX30C CANOPY US PRICE LIST
COMMERCIAL MODEL Weight Factory Data List PriceCX30C CANOPY 6,306 LBS. $47,266.00Includes the following EquipmentAdditional Counterweight. (747996) $206.00
6 of 19
Titan MachineryCase Compact Excavators C-Series
June 28, 2019
Factory Supplied Attachments
1-Position Pin-On
KLAC Buckets & Coupler
Pin-On Buckets & Coupler
Thumbs
47457879 Dead Pin KitRequired when ordering more than 1 bucket with a Pin- Grabber Coupler
8 LB $177.00
48058019 Thumb Kit, Hyd.,Short Tines(Use with direct fit, KLAC buckets and Mechanical Pin-Grabber coupler)
150 LB $2,248.00
48094114 Thumb Kit, Hyd., Long Tines(Use w/Hyd. Pin-Grabber coupler only)
150 LB $2,248.00
48057612 18"HD Bucket (Mech/Hyd Coupler) 70,000G
$623.00
48057613 24"HD Bucket (Mech/Hyd Coupler) 185 LB $797.0048057615 Coupler, Mechanical Pin-Grabber
(Only compatible with the C-Series bucket)Includes 1 set of dead pins for installation into a single bucket
95 LB $1,538.00
48094307 Coupler,Hydraulic Pin-Grabber(Compatible with both the B/C-Series buckets, when used with a B-Series bucket, it requires the removal of the spacer plates) Includes 1 set of dead pins for installation into a single bucket
99 LB $3,386.00
48094118 24"HD Bucket (KLAC Coupler) 209 LB $800.0048057633 Coupler, KLAC 71 LB $1,102.0047422632 KLAC Base Plate (To adapt other buckets) 20 LB $285.00
48057611 12"HD Bucket (Mech/Hyd Coupler) 121 LB $521.00
48190705 18" High Capacity Bucket ONLY for usage w/o a coupler. $856.00
48190706 24" High Capacity Bucket ONLY for usage w/o a coupler. $998.00
48094116 12"HD Bucket (KLAC Coupler) 143 LB $524.0048094117 18"HD Bucket (KLAC Coupler) 176 LB $625.00
CX30C CANOPY US PRICE LIST
Order Code Description Weight Factory Data List Price
48190704 12" High Capacity Bucket ONLY for usage w/o a coupler. $773.00
7 of 19
Titan MachineryCase Compact Excavators C-Series
June 28, 2019
SD_47181 OPERATOR'S MANUAL
SD_10181 CRAWLER TYPE
SD_30180 TRAVEL ALARM
SD_X5405 2ND AUX. CIRCUIT
SD_X5406 1ST AUX HYD TWO WAYS
SD_X5430 THUMB CYL BRACKET
SD_X6100 ARM
SD_X6206 LINKAGE
SD_X6207 HYDR Q/C PROV.
SD_X6210 BEACON
747065 W/O Q/C Provision No Charge747064 Hydraulic Q/C Provision
Includes switch & hydraulic lines to end of arm$500.00
XX6210X W/O Beacon No Charge747070 Beacon $280.00
747058 Thumb Bracket $443.00
747320 Short Arm - 747320 No Charge
747062 Linkage With Hook No Charge747063 Linkage Without Hook ($61.00)
747053 2nd Aux 2-Way ProportionalCX37C - if ordering Angle Blade - 2nd 2-way Aux is used for the angle circuit. Cannot order 747053 with 7479814-way Angle Blade.NOTE: 2nd Aux INCLUDES 1st Aux hose options.
$1,633.00
747054 2Way Aux Pedal Proportional No Charge747055 2Way Aux Joystick Proportional No Charge
747059 W/O Thumb Bracket No Charge
9552700 Rubber TracksOne-piece molded rubber belt track w/ a steel cable core. The entire track must be replaced at time of service. Select this track for general use on soils & hard surfaces.
No Charge
ADDITIONAL EQUIPMENT MEX
747994 W/O Travel Alarm No Charge747453 Travel Alarm $207.00
747999 W/O 2nd Aux 2-Way Proportional No Charge
OPERATOR'S MANUAL
747480 Operators Manual - English No Charge747961 Operators Manual - French No Charge747464 Operators Manual- Spanish No Charge
VERSION
CX30C CAB US PRICE LIST
Order Code Description Weight Factory Data List Price
CX30C CAB US PRICE LIST
COMMERCIAL MODEL Weight Factory Data List PriceCX30C CAB 6,636 LBS. $52,977.00Includes the following EquipmentAdditional Counterweight. (747996) $206.00
8 of 19
Titan MachineryCase Compact Excavators C-Series
June 28, 2019
Factory Supplied Attachments
1-Position Pin-On
KLAC Buckets & Coupler
Pin-On Buckets & Coupler
Thumbs
48094114 Thumb Kit, Hyd., Long Tines(Use w/Hyd. Pin-Grabber coupler only)
150 LB $2,248.00
48057615 Coupler, Mechanical Pin-Grabber(Only compatible with the C-Series bucket)Includes 1 set of dead pins for installation into a single bucket
95 LB $1,538.00
48094307 Coupler,Hydraulic Pin-Grabber(Compatible with both the B/C-Series buckets, when used with a B-Series bucket, it requires the removal of the spacer plates) Includes 1 set of dead pins for installation into a single bucket
99 LB $3,386.00
47457879 Dead Pin KitRequired when ordering more than 1 bucket with a Pin- Grabber Coupler
8 LB $177.00
48058019 Thumb Kit, Hyd.,Short Tines(Use with direct fit, KLAC buckets and Mechanical Pin-Grabber coupl
150 LB $2,248.00
47422632 KLAC Base Plate (To adapt other buckets) 20 LB $285.00
48057611 12"HD Bucket (Mech/Hyd Coupler) 121 LB $521.0048057612 18"HD Bucket (Mech/Hyd Coupler) 70,000
G$623.00
48057613 24"HD Bucket (Mech/Hyd Coupler) 185 LB $797.00
48094116 12"HD Bucket (KLAC Coupler) 143 LB $524.0048094117 18"HD Bucket (KLAC Coupler) 176 LB $625.0048094118 24"HD Bucket (KLAC Coupler) 209 LB $800.0048057633 Coupler, KLAC 71 LB $1,102.00
CX30C CAB US PRICE LIST
Order Code Description Weight Factory Data List Price
48190704 12" High Capacity Bucket ONLY for usage w/o a coupler. $773.00
48190705 18" High Capacity Bucket ONLY for usage w/o a coupler. $856.00
48190706 24" High Capacity Bucket ONLY for usage w/o a coupler. $998.00
9 of 19
Titan MachineryCase Compact Excavators C-Series
June 28, 2019
SD_47181 OPERATOR'S MANUAL
SD_10181 CRAWLER TYPE
SD_30180 TRAVEL ALARM
SD_X5405 2ND AUX. CIRCUIT
SD_X5406 1ST AUX HYD TWO WAYS
(Ex Works)
SD_X5430 THUMB CYL BRACKET
SD_X6100 ARM
SD_X6206 LINKAGE
SD_X6207 HYDR Q/C PROV.
SD_X6210 BEACON
747064 Hydraulic Q/C ProvisionIncludes switch & hydraulic lines to end of arm
$500.00
XX6210X W/O Beacon No Charge747070 Beacon $280.00
747320 Short Arm - 747320 No Charge
747062 Linkage With Hook No Charge747063 Linkage Without Hook ($61.00)
747065 W/O Q/C Provision No Charge
747054 2Way Aux Pedal Proportional No Charge
747055 2Way Aux Joystick Proportional No Charge
747059 W/O Thumb Bracket No Charge747058 Thumb Bracket $443.00
747994 W/O Travel Alarm No Charge747453 Travel Alarm $207.00
747999 W/O 2nd Aux 2-Way Proportional No Charge747053 2nd Aux 2-Way Proportional
CX37C - if ordering Angle Blade - 2nd 2-way Aux is used for the angle circuit. Cannot order 747053 with 7479814-way Angle Blade.NOTE: 2nd Aux INCLUDES 1st Aux hose options.
$1,628.00
747464 Operators Manual- Spanish No ChargeVERSION
9552700 Rubber TracksOne-piece molded rubber belt track w/ a steel cable core. The entire track must be replaced at time of service. Select this track for general use on soils & hard surfaces.
No Charge
9553700 Steel TracksSteel Track chain with steel grousers/shoes. Select this track for the most aggressive traction in soils & if there is no concern for disrupting the appearance of ground conditions such as grass, asphalt or concrete. This track is intended for use on soils, but can be used on hard surfaces as well.
$1,322.00
ADDITIONAL EQUIPMENT MEX
CX33C CANOPY US PRICE LIST
Order Code Description Weight Factory Data List PriceOPERATOR'S MANUAL
747480 Operators Manual - English No Charge747961 Operators Manual - French No Charge
CX33C CANOPY US PRICE LIST
COMMERCIAL MODEL Weight Factory Data List PriceCX33C CANOPY 7,396 LBS. $52,438.00Includes the following EquipmentAdditional Counterweight. (747996) $206.00
10 of 19
Titan MachineryCase Compact Excavators C-Series
June 28, 2019
Factory Supplied Attachments
KLAC Buckets & Coupler
Pin-On Buckets & Coupler
Thumbs
48058020 Thumb Kit, Hyd.,Long Tines(Use with direct fit and KLAC buckets)
150 LB $2,350.00
48058013 Coupler,Hydraulic Pin-Grabber(Compatible with both the B/C-Series buckets)
132 LB $3,386.00
48057624 Dead Pin Kit (for additional buckets)Required when ordering more than 1 bucket with a Pin- Grabber Coupler
11 LB $197.00
48057638 Ripper Tooth Pin-On 220 LB $929.00
48059646 Thumb Kit, Hyd.,Short Tines(Use with direct fit and KLAC buckets)
150 LB $2,350.00
48057617 12"HD Bucket (Pin-On & Mech/Hyd Coupler) 161 LB $774.0048057619 18"HD Bucket (Pin-On & Mech/Hyd Coupler) 205 LB $857.0048057620 24"HD Bucket (Pin-On & Mech/Hyd Coupler)
For CX33C models this size bucket is intended for useage w/o a coupler or thumb to achieve the optimal performance. Always reference model lifting capacities when configuring units with attachments.
247 LB $998.00
48057623 Coupler, Mechanical Pin-Grabber (Compatible with both the B/C-Series buckets)Includes 1 set of dead pins for installation into a single bucket
43 LB $1,545.00
47422654 12"HD Bucket (KLAC Coupler) 189 LB $1,008.0047422655 18"HD Bucket (KLAC Coupler) 223 LB $1,091.0047422656 24"HD Bucket (KLAC Coupler)
For CX33C models this size bucket is intended for useage w/o a coupler or thumb to achieve the optimal performance.Always reference model lifting capacities when configuring units with attachments
267 LB $1,233.00
48057634 Coupler, KLAC 43 LB $1,239.00
CX33C CANOPY US PRICE LIST
Order Code Description Weight Factory Data List Price
11 of 19
Titan MachineryCase Compact Excavators C-Series
June 28, 2019
SD_47181 OPERATOR'S MANUAL
SD_10181 CRAWLER TYPE
SD_30180 TRAVEL ALARM
SD_40003 COUNTERWEIGHT
SD_X5405 2ND AUX. CIRCUIT
(Ex Works)
SD_X5406 1ST AUX HYD TWO WAYS
SD_X5430 THUMB CYL BRACKET
SD_X6100 ARM
SD_X6105 DOZER BLADE OPTION
SD_X6206 LINKAGE747062 Linkage With Hook No Charge747063 Linkage Without Hook ($61.00)
747320 Short Arm - 747320 No Charge
747329 Long Arm - 747329Long arm increases dig depth, resulting in a reduction in arm digging forces & lift capacity.
$327.00
747232 STD DOZER BLADE 747232 No Charge747981 4-Way Angle Dozer Blade
The weight of the dozer blade option adds 220 lbs. (100 kg)& includes the additional counterweight which adds 330 lbs. (150 kg) for a total added weight of 550 lbs. (250 kg)Option REQUIRES the additional counterweight 747996Includes bolt-on reversible cutting edge
$3,407.00
747054 2Way Aux Pedal Proportional No Charge747055 2Way Aux Joystick Proportional No Charge
747059 W/O Thumb Bracket No Charge747058 Thumb Bracket $443.00
747995 Standard Counterweight. No Charge747996 Additional Counterweight.
Additional bolt on weight adds 286 lb (130 kg) - CX26C Additional bolt on weight adds 330 lb (150 kg) - CX37C CX37C - Add. Cwt comes w/ Angle Blade
$210.00
747999 W/O 2nd Aux 2-Way Proportional No Charge
747053 2nd Aux 2-Way ProportionalCX37C - if ordering Angle Blade - 2nd 2-way Aux is used for the angle circuit. Cannot order 747053 with 7479814-way Angle Blade.NOTE: 2nd Aux INCLUDES 1st Aux hose options.
$1,892.00
9552700 Rubber TracksOne-piece molded rubber belt track w/ a steel cable core. The entire track must be replaced at time of service. Select this track for general use on soils & hard surfaces.
No Charge
9553700 Steel TracksSteel Track chain with steel grousers/shoes. Select this track for the most aggressive traction in soils & if there is no concern for disrupting the appearance of ground conditions such as grass, asphalt or concrete. This track is intended for use on soils, but can be used on hard surfaces as well.
$1,536.00
ADDITIONAL EQUIPMENT MEX
747994 W/O Travel Alarm No Charge747453 Travel Alarm $207.00
OPERATOR'S MANUAL
747480 Operators Manual - English No Charge747961 Operators Manual - French No Charge747464 Operators Manual- Spanish No Charge
VERSION
CX37C CANOPY. US PRICE LIST
Order Code Description Weight Factory Data List Price
CX37C CANOPY. US PRICE LIST
COMMERCIAL MODEL Weight Factory Data List PriceCX37C CANOPY. 7,990 LBS. $50,655.00
12 of 19
Titan MachineryCase Compact Excavators C-Series
June 28, 2019
SD_X6207 HYDR Q/C PROV.
SD_X6210 BEACON
Factory Supplied Attachments
KLAC Buckets & Coupler
Pin-On Buckets & Coupler
Thumbs48057638 Ripper Tooth Pin-On 220 LB $929.00
48059646 Thumb Kit, Hyd.,Short Tines(Use with direct fit and KLAC buckets)
150 LB $2,350.00
48058020 Thumb Kit, Hyd.,Long Tines(Use with Mech. and Hyd. Pin-Grabber couplers)
200 LB $2,350.00
48057622 36"Ditch Bucket (Pin-On & M/H Coupler) 313 LB $1,054.0048057623 Coupler, Mechanical Pin-Grabber (Compatible with both the B/C-Series
buckets)Includes 1 set of dead pins for installation into a single bucket
43 LB $1,545.00
48058013 Coupler,Hydraulic Pin-Grabber(Compatible with both the B/C-Series buckets)
132 LB $3,386.00
48057624 Dead Pin Kit (for additional buckets)Required when ordering more than 1 bucket with a Pin- Grabber Coupler
11 LB $197.00
48057617 12"HD Bucket (Pin-On & Mech/Hyd Coupler) 161 LB $774.0048057619 18"HD Bucket (Pin-On & Mech/Hyd Coupler) 205 LB $857.0048057620 24"HD Bucket (Pin-On & Mech/Hyd Coupler)
For CX33C models this size bucket is intended for useage w/o a coupler or thumb to achieve the optimal performance. Always reference model lifting capacities when configuring units with attachments.
247 LB $998.00
48057621 36"HD Bucket (Pin-On & Mech/Hyd Coupler) 331 LB $1,270.00
47422655 18"HD Bucket (KLAC Coupler) 223 LB $1,091.0047422656 24"HD Bucket (KLAC Coupler)
For CX33C models this size bucket is intended for useage w/o a coupler or thumb to achieve the optimal performance.Always reference model lifting capacities when configuring units with attachments
267 LB $1,233.00
47422658 36"Ditch Bucket (KLAC Coupler) 315 LB $1,139.0048057634 Coupler, KLAC 43 LB $1,239.00
XX6210X W/O Beacon No Charge747070 Beacon $280.00
CX37C CANOPY. US PRICE LIST
Order Code Description Weight Factory Data List Price
47422654 12"HD Bucket (KLAC Coupler) 189 LB $1,008.00
747065 W/O Q/C Provision No Charge747064 Hydraulic Q/C Provision
Includes switch & hydraulic lines to end of arm$500.00
CX37C CANOPY. US PRICE LIST
13 of 19
Titan MachineryCase Compact Excavators C-Series
June 28, 2019
SD_47181 OPERATOR'S MANUAL
SD_10181 CRAWLER TYPE
SD_30180 TRAVEL ALARM
SD_40003 COUNTERWEIGHT
SD_X5405 2ND AUX. CIRCUIT
SD_X5406 1ST AUX HYD TWO WAYS
SD_X5430 THUMB CYL BRACKET
SD_X6100 ARM
SD_X6105 DOZER BLADE OPTION
SD_X6206 LINKAGE
747232 STD DOZER BLADE 747232 No Charge747981 4-Way Angle Dozer Blade
The weight of the dozer blade option adds 220 lbs. (100 kg)& includes the additional counterweight which adds 330 lbs. (150 kg) for a total added weight of 550 lbs. (250 kg)Option REQUIRES the additional counterweight 747996Includes bolt-on reversible cutting edge
$3,407.00
747062 Linkage With Hook No Charge747063 Linkage Without Hook ($61.00)
747059 W/O Thumb Bracket No Charge747058 Thumb Bracket $443.00
747320 Short Arm - 747320 No Charge
747329 Long Arm - 747329Long arm increases dig depth, resulting in a reduction in arm digging forces & lift capacity.
$327.00
747999 W/O 2nd Aux 2-Way Proportional No Charge747053 2nd Aux 2-Way Proportional
CX37C - if ordering Angle Blade - 2nd 2-way Aux is used for the angle circuit. Cannot order 747053 with 7479814-way Angle Blade.NOTE: 2nd Aux INCLUDES 1st Aux hose options.
$1,892.00
747054 2Way Aux Pedal Proportional No Charge747055 2Way Aux Joystick Proportional No Charge
747994 W/O Travel Alarm No Charge747453 Travel Alarm $207.00
747995 Standard Counterweight. No Charge747996 Additional Counterweight.
Additional bolt on weight adds 286 lb (130 kg) - CX26C Additional bolt on weight adds 330 lb (150 kg) - CX37C CX37C - Add. Cwt comes w/ Angle Blade
$210.00
747464 Operators Manual- Spanish No ChargeVERSION
9552700 Rubber TracksOne-piece molded rubber belt track w/ a steel cable core. The entire track must be replaced at time of service. Select this track for general use on soils & hard surfaces.
No Charge
9553700 Steel TracksSteel Track chain with steel grousers/shoes. Select this track for the most aggressive traction in soils & if there is no concern for disrupting the appearance of ground conditions such as grass, asphalt or concrete. This track is intended for use on soils, but can be used on hard surfaces as well.
$1,536.00
ADDITIONAL EQUIPMENT MEX
CX37C CAB. US PRICE LIST
Order Code Description Weight Factory Data List PriceOPERATOR'S MANUAL
747480 Operators Manual - English No Charge747961 Operators Manual - French No Charge
CX37C CAB. US PRICE LIST
COMMERCIAL MODEL Weight Factory Data List PriceCX37C CAB. 8,300 LBS. $59,753.00
14 of 19
Titan MachineryCase Compact Excavators C-Series
June 28, 2019
SD_X6207 HYDR Q/C PROV.
SD_X6210 BEACON
Factory Supplied Attachments
KLAC Buckets & Coupler
Pin-On Buckets & Coupler
Thumbs
CX37C CAB. US PRICE LIST
48058020 Thumb Kit, Hyd.,Long Tines(Use with Mech. and Hyd. Pin-Grabber couplers)
200 LB $2,350.00
48058013 Coupler,Hydraulic Pin-Grabber(Compatible with both the B/C-Series buckets)
132 LB $3,386.00
48057624 Dead Pin Kit (for additional buckets)Required when ordering more than 1 bucket with a Pin- Grabber Coupler
11 LB $197.00
48057638 Ripper Tooth Pin-On 220 LB $929.00
48059646 Thumb Kit, Hyd.,Short Tines(Use with direct fit and KLAC buckets)
150 LB $2,350.00
48057620 24"HD Bucket (Pin-On & Mech/Hyd Coupler)For CX33C models this size bucket is intended for useage w/o a coupler or thumb to achieve the optimal performance. Always reference model lifting capacities when configuring units with attachments.
247 LB $998.00
48057621 36"HD Bucket (Pin-On & Mech/Hyd Coupler) 331 LB $1,270.0048057622 36"Ditch Bucket (Pin-On & M/H Coupler) 313 LB $1,054.0048057623 Coupler, Mechanical Pin-Grabber (Compatible with both the B/C-Series
buckets)Includes 1 set of dead pins for installation into a single bucket
43 LB $1,545.00
47422658 36"Ditch Bucket (KLAC Coupler) 315 LB $1,139.0048057634 Coupler, KLAC 43 LB $1,239.00
48057617 12"HD Bucket (Pin-On & Mech/Hyd Coupler) 161 LB $774.0048057619 18"HD Bucket (Pin-On & Mech/Hyd Coupler) 205 LB $857.00
CX37C CAB. US PRICE LIST
Order Code Description Weight Factory Data List Price
47422654 12"HD Bucket (KLAC Coupler) 189 LB $1,008.0047422655 18"HD Bucket (KLAC Coupler) 223 LB $1,091.0047422656 24"HD Bucket (KLAC Coupler)
For CX33C models this size bucket is intended for useage w/o a coupler or thumb to achieve the optimal performance.Always reference model lifting capacities when configuring units with attachments
267 LB $1,233.00
747065 W/O Q/C Provision No Charge747064 Hydraulic Q/C Provision
Includes switch & hydraulic lines to end of arm$500.00
XX6210X W/O Beacon No Charge747070 Beacon $280.00
15 of 19
Titan MachineryCase Compact Excavators C-Series
June 28, 2019
SD_47181 OPERATOR'S MANUAL
SD_10181 CRAWLER TYPE
SD_30180 TRAVEL ALARM
SD_X5202 TRACK GUIDE
9552613 Steel w/Pad Hole 400MMSteel track chain with steel grousers/shoes that have holes to accept bolt on rubber track pads. Select this track for the most aggressive traction in soils and if there is noconcern for disrupting the appearance of ground conditions such as grass, asphalt or concrete. For added traction on hard surfaces such as asphalt or concrete and to help protect their surface finish it is recommended to use bolt on rubbertrack pads.
$2,200.00
9552610 Steel Tracks 450 MMSteel track chain with steel grousers/shoes. Select this track for the most aggressive traction in soils and if there is no concern for disrupting the appearance of ground conditions such as grass, asphalt or concrete. This track is intended for use on soils, but can be used on hard surfaces as well.
$2,320.00
ADDITIONAL EQUIPMENT MEX
747453 Travel Alarm $304.00747994 W/O Travel Alarm No Charge
747096 Full Track GuideFull track guides for steel tracks and steel tracks with bolt on rubber track pads only
$676.00
747097 3-Piece Track Guide3-piece track guides for steel tracks and steel tracks with bolt on rubber track pads only
No Charge
747961 Operators Manual - French No ChargeVERSION
9552711 Rubber Tracks 400MMOne-piece molded rubber belt track with a steel cable core. The entire track must be replaced at time of service. Select this track for general use on soils and hard surfaces.
No Charge
9552710 Rubber Link Tracks 400MMSteel track chain with molded rubber grousers/shoes. These are also called hybrid tracks or roadliner tracks. Each Grouser/ shoe has a steel core completely molded in rubber and can be individually replaced since they are bolted to a steel chain.This track will offer the stability of a steel track with thesurface protection of a rubber track pad.
$11,986.00
9552612 Steel w/Pads 400 MMSteel track chain with steel grousers/shoes and bolt on rubber track pads. Each rubber track pad can be individually replaced or removed independently from the steel grouser/shoe. Select this option to gain traction on hard surfaces such as asphalt or concrete and to help protect their surface finish with the rubber track pads attached. All of the rubber track pads can be removed to perform as an all steel track as desired.
$4,241.00
CX57C COMPACT EXCAVATOR US PRICE LIST
Order Code Description Weight Factory Data List PriceOPERATOR'S MANUAL
747480 Operators Manual - English No Charge747464 Operators Manual- Spanish No Charge
CX57C COMPACT EXCAVATOR US PRICE LIST
COMMERCIAL MODEL Weight Factory Data List PriceCX57C CAB 12,270 LB $81,822.00Includes the following EquipmentAdditional Counterweight (747084) $676.00
16 of 19
Titan MachineryCase Compact Excavators C-Series
June 28, 2019
SD_X5405 2ND AUX. CIRCUIT
SD_X5407 1ST AUX HYD CIRCUIT
SD_X5415 REAR AUX WORK LIGHTS
SD_X6100 ARM
SD_X6206 LINKAGE
SD_X6207 HYDR Q/C PROV.
SD_X6210 BEACON
SD_X9908 CAMERA
Factory Supplied Attachments
Pin-On Buckets & Coupler
KLAC Buckets & Coupler
Thumbs
48059650 Thumb Kit, Hyd.,Short Tines(Use with direct fit and KLAC buckets)
250 LB $2,453.00
48057636 Coupler, KLAC 55 LB $1,278.0047422660 KLAC Base Plate (To adapt other buckets) 31 LB $348.0047873455 ATTACHMENT, RIPPER TOOTH, 220 LB $929.00
48058021 Thumb Kit, Hyd.,Long Tines(Use with Mech. and Hyd. Pin-Grabber couplers)
250 LB
47422703 18"HD Bucket (KLAC Coupler) 256 LB $1,237.00
$2,453.00
47422704 24"HD Bucket (KLAC Coupler) 309 LB $1,379.0047422705 36"HD Bucket (KLAC Coupler) 408 LB $1,643.0047422658 36"Ditch Bucket (KLAC Coupler) 315 LB $1,139.0047872281 36"Cemetary Bucket (KLAC Coupler) 310 LB $1,200.00
48082917 Coupler, B/C-Series Universal Mechanical (Compatible with both the B/C-Series buckets)
85 LB $824.00
48057631 PINRequired when ordering more than 1 bucket with a Pin- Grabber Coupler
$209.00
48057639 Ripper Tooth Pin-On 220 LB $929.00
47422702 12"HD Bucket (KLAC Coupler) 220 LB $1,165.00
48057629 36"Ditch Bucket (Pin-On & M/H Coupler) 313 LB $1,056.0048057637 36"Cemetary Bucket (Pin-On& M/H Coupler) 305 LB $1,200.0048057630 Coupler, Mechanical Pin-Grabber
(Only compatible with the C-Series bucket)Includes 1 set of dead pins for installation into a single bucket
74 LB $1,545.00
48058014 Coupler, Hydraulic Pin-Grabber(Only compatible with the C-Series bucket)
63 LB $3,251.00
48057625 12"HD Bucket (Pin-On & Mech/Hyd Coupler) 190 LB $931.0048057626 18"HD Bucket (Pin-On & Mech/Hyd Coupler) 240 LB $1,001.0048057627 24"HD Bucket (Pin-On & Mech/Hyd Coupler) 291 LB $1,143.0048057628 36"HD Bucket (Pin-On & Mech/Hyd Coupler) 388 LB $1,407.00
747087 W/O - Beacon ($47.00)
747089 W/O Rear View Camera No Charge747090 Rear View Camera $593.00
CX57C COMPACT EXCAVATOR US PRICE LIST
Order Code Description Weight Factory Data List Price
747063 Linkage Without Hook ($140.00)
747064 Hydraulic Q/C Provision $641.00747065 W/O Q/C Provision No Charge
747070 Beacon No Charge
747115 Rear Aux Work Lights No Charge
747078 Arm Short w/Thumb Bracket No Charge747079 Arm Long w/Thumb Bracket
Long arm increases dig depth, resulting in a reduction in arm digging forces & lift capacity.
$912.00
747062 Linkage With Hook No Charge
747053 2nd Aux 2-Way Proportional $2,641.00747999 W/O 2nd Aux 2-Way Proportional No Charge
747122 2Way Aux Joystick Proportional No Charge747123 2Way Aux Pedal Proportional $646.00
CX57C COMPACT EXCAVATOR US PRICE LIST
17 of 19
Titan MachineryCase Compact Excavators C-Series
June 28, 2019
SD_47181 OPERATOR'S MANUAL
SD_10181 CRAWLER TYPE
SD_30180 TRAVEL ALARM
SD_40003 COUNTERWEIGHT
SD_X5202 TRACK GUIDE747097 3-Piece Track Guide
3-piece track guides for steel tracks and steel tracks with bolt on rubber track pads only
No Charge
9552613 Steel w/Pad Hole 400MMSteel track chain with steel grousers/shoes that have holes to accept bolt on rubber track pads. Select this track for the most aggressive traction in soils and if there is noconcern for disrupting the appearance of ground conditions such as grass, asphalt or concrete. For added traction on hard surfaces such as asphalt or concrete and to help protect their surface finish it is recommended to use bolt on rubbertrack pads.
$2,200.00
9552610 Steel Tracks 450 MMSteel track chain with steel grousers/shoes. Select this track for the most aggressive traction in soils and if there is no concern for disrupting the appearance of ground conditions such as grass, asphalt or concrete. This track is intended for use on soils, but can be used on hard surfaces as well.
$2,320.00
ADDITIONAL EQUIPMENT MEX
747453 Travel Alarm $304.00747994 W/O Travel Alarm No Charge
747084 Additional CounterweightCX60C - additional bolt-on weight that adds 440 lb (200 kg)
$850.00
747995 Standard Counterweight. No Charge
747961 Operators Manual - French No ChargeVERSION
9552711 Rubber Tracks 400MMOne-piece molded rubber belt track with a steel cable core. The entire track must be replaced at time of service. Select this track for general use on soils and hard surfaces.
No Charge
9552710 Rubber Link Tracks 400MMSteel track chain with molded rubber grousers/shoes. These are also called hybrid tracks or roadliner tracks. Each Grouser/ shoe has a steel core completely molded in rubber and can be individually replaced since they are bolted to a steel chain.This track will offer the stability of a steel track with thesurface protection of a rubber track pad.
$12,502.00
9552612 Steel w/Pads 400 MMSteel track chain with steel grousers/shoes and bolt on rubber track pads. Each rubber track pad can be individually replaced or removed independently from the steel grouser/shoe. Select this option to gain traction on hard surfaces such as asphalt or concrete and to help protect their surface finish with the rubber track pads attached. All of the rubber track pads can be removed to perform as an all steel track as desired.
$4,424.00
CX60C COMPACT EXCAVATOR US PRICE LIST
Order Code Description Weight Factory Data List PriceOPERATOR'S MANUAL
747480 Operators Manual - English No Charge747464 Operators Manual- Spanish No Charge
CX60C COMPACT EXCAVATOR US PRICE LIST
COMMERCIAL MODEL Weight Factory Data List PriceCX60C CAB 12,940 LB $85,835.00
18 of 19
Titan MachineryCase Compact Excavators C-Series
June 28, 2019
SD_X5405 2ND AUX. CIRCUIT
SD_X5407 1ST AUX HYD CIRCUIT
SD_X6100 ARM
SD_X6206 LINKAGE
SD_X6207 HYDR Q/C PROV.
SD_X6210 BEACON
SD_X9908 CAMERA
Factory Supplied Attachments
Pin-On Buckets & Coupler
KLAC Buckets & Coupler
Thumbs
47422660 KLAC Base Plate (To adapt other buckets) 31 LB $348.0047873455 ATTACHMENT, RIPPER TOOTH, 220 LB $929.00
48058021 Thumb Kit, Hyd.,Long Tines(Use with Mech. and Hyd. Pin-Grabber couplers)
250 LB $2,453.00
48057639 Ripper Tooth Pin-On 220 LB $929.00
47422702 12"HD Bucket (KLAC Coupler) 220 LB $1,165.0047422703 18"HD Bucket (KLAC Coupler) 256 LB $1,237.00
48059650 Thumb Kit, Hyd.,Short Tines(Use with Mech. and Hyd. Pin-Grabber couplers)
250 LB $2,453.00
47422705 36"HD Bucket (KLAC Coupler) 408 LB $1,643.0047422658 36"Ditch Bucket (KLAC Coupler) 315 LB $1,139.0047872281 36"Cemetary Bucket (KLAC Coupler) 310 LB $1,200.0048057636 Coupler, KLAC 55 LB $1,278.00
48057637 36"Cemetary Bucket (Pin-On& M/H Coupler) 305 LB $1,200.00
47422704 24"HD Bucket (KLAC Coupler) 309 LB $1,379.00
48057630 Coupler, Mechanical Pin-Grabber(Only compatible with the C-Series bucket)Includes 1 set of dead pins for installation into a single bucket
74 LB $1,545.00
48058014 Coupler, Hydraulic Pin-Grabber(Only compatible with the C-Series bucket)
63 LB $3,251.00
48082917 Coupler, B/C-Series Universal Mechanical (Compatible with both the B/C-Series buckets)
85 LB $824.00
48057631 PINRequired when ordering more than 1 bucket with a Pin- Grabber Coupler
$209.00
48057626 18"HD Bucket (Pin-On & Mech/Hyd Coupler) 240 LB $1,001.0048057627 24"HD Bucket (Pin-On & Mech/Hyd Coupler) 291 LB $1,143.0048057628 36"HD Bucket (Pin-On & Mech/Hyd Coupler) 388 LB $1,407.0048057629 36"Ditch Bucket (Pin-On & M/H Coupler) 313 LB $1,056.00
747089 W/O Rear View Camera No Charge747090 Rear View Camera $593.00
CX60C COMPACT EXCAVATOR US PRICE LIST
Order Code Description Weight Factory Data List Price
48057625 12"HD Bucket (Pin-On & Mech/Hyd Coupler) 190 LB $931.00
747064 Hydraulic Q/C Provision $641.00747065 W/O Q/C Provision No Charge
747070 Beacon No Charge747087 W/O - Beacon ($47.00)
747078 Arm Short w/Thumb Bracket No Charge747079 Arm Long w/Thumb Bracket
Long arm increases dig depth, resulting in a reduction in arm digging forces & lift capacity.
$912.00
747062 Linkage With Hook No Charge747063 Linkage Without Hook ($140.00)
747053 2nd Aux 2-Way Proportional $2,641.00747999 W/O 2nd Aux 2-Way Proportional No Charge
747122 2Way Aux Joystick Proportional No Charge
CX60C COMPACT EXCAVATOR US PRICE LIST
19 of 19
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
Weight17,400 LBS
SD_E5311 BOOM481858
461025
SD_E5320 ARM/DIPPERSTICK
781172481265
481062481063
SD_E5199 TRACK SHOES95600179560002
9560018
9560020
SD_47083 OPERATOR'S MANUAL781981461540781980
SD_E5443 CAB GUARD (FOPS)XE5443X481070
SD_E5444 CAB GUARD (FRONT)XE5444X461142461024
SD_E6410 AUXILIARY HYDRAULICSXE6410X
CX75C MIN SWING RADIUS CRAWLER EXCAVATOR US PRICE LIST
COMMERCIAL MODEL Factory Data List PriceCX75C W/DOZER BLADE $112,190.00
CX75C MIN SWING RADIUS CRAWLER EXCAVATOR US PRICE LIST
Order Code Description Weight Factory Data List PriceBOOMS
Std Boom12'4" (3.75 M) Standard Boom
No Charge
Offset Boom12'9" (3.89 M) Offset Boom
$7,730.00
ARMS
For use with Standard Boom5'7" (1.69 M) Arm No Charge7'2" (2.19 M) Arm $635.00
For use with Offset Boom5'9" (1.75 M) Standard Arm $942.006' 11" (2.11 M) Standard Arm $1,484.00
TRACK SHOES
18" (450mm) Steel Shoes, 3-bar No Charge23.6"(600mm) Steel ShoesBlade will not fully cover track width when using 24" shoes
$763.00
18"(450mm)Bolt-on Rubber TrackRubber pads bolted on regular 18" track
$5,882.00
17.7"(450mm)Full Rubber Tracks $3,588.00LANGUAGE
English Literature No ChargeFrench Canadian Literature No ChargeSpanish Literature No Charge
ADDITIONAL EQUIPMENT CXMADDITIONAL OPTIONS
No FOPS Top Cab Guard No ChargeFOPS Top Cab Guard $1,146.00
No Front Guard No ChargeFront Guard - Wire Mesh Screen $1,326.00Front Stone Guard (OPG L2)vertical bars (one piece/full length)
$2,324.00
No Optional Hydraulics No Charge
1 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
461868
461873
SD_E6417 SECONDARY AUXILIARY HYDRAULICSXE6417X461863
SD_E9702 REAR VIEW CAMERAXE9702X461504
SD_E9730 SAFETY VALVEXE9730X461559
SD_E9874 REFUEL PUMPXE9874X481257
For use with Standard BoomMulti Function - ProportionalMulti-Function Auxiliary Hydraulics For use with multiple applications: hammers/thumbs/grapples/crushersDoes not include the in-cab Electronic Pressure Control featureJoystick activated with Electronic Proportional Controls Provides single or dual pump, two-way flowSecondary Low-flow Auxiliary Hydraulics can be addedIncludes manually adjustable relief valve to set required pressures Is switchable to single acting flow for hammer applicationsNotes:1) Not for use with other Auxiliary Hydraulics options with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C Series excavators.
$6,885.00
CX75C MIN SWING RADIUS CRAWLER EXCAVATOR US PRICE LIST
For use with Offset BoomOffset Boom Double Aux HydOffset Boom Double Acting Auxiliary Hydraulics For use with Offset Boom option 461025 ONLY For use with Offset Short Arm 481062 ONLYFor use with thumb applicationsJoystick Activated with Electronic Proportional Controls Provides single pump, two-way flowHydraulic plumbing provided to the end of the boom only, no piping to the armThis system is not switchable to single acting flowNotes:1) Not for use other Auxiliary Hydraulics options with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C series excavators.
$3,783.00
No Low Flow Circuit No ChargeSecondary Auxiliary HydraulicsSecondary Low Flow Auxiliary HydraulicsProvides low-flow for rotation or tilt hydraulic attachments.For use with Standard Boom option 481858 Not for use with Offset Boom option 461025Joystick Activated with Electronic Proportional Controls
$4,039.00
No Rear View Camera No ChargeRear View Camera $646.00
No Hose Burst Check Valve No ChargeHose Burst Check ValveLocated on Boom and Arm Cylinder
$4,051.00
No Refuel Pump No ChargeRefuel Pump $1,296.00
2 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
Factory Supplied Attachments
Case Coupler
Case Coupler Buckets
Case Pin-On Buckets
Direct Link Thumb
CX75C MIN SWING RADIUS CRAWLER EXCAVATOR US PRICE LIST
Order Code Description Weight Factory Data List Price
47603261 Multi-Fit S Hyd.Pin Grabber Coupler Kit Full Kit and PinsOptimized for use with Case coupler buckets.Also can be used with a wide range of buckets from other manufacturers including pin-on types.Includes hydraulic installation kit and instructions.
205 LB $6,193.00
84422902 18" Heavy-Duty Coupler Bucket with 3 teeth (.24 cu. yd.) 440 LB $1,749.00
84422903 24" Heavy-Duty Coupler Bucket with 4 teeth (.32 cu. yd.) 520 LB $2,067.00
84422906 30" Heavy-Duty Coupler Bucket with 5 teeth (.41 cu. yd.) 585 LB $2,292.00
84422909 36" Heavy-Duty Coupler Bucket with 5 teeth (.50 cu. yd.) 670 LB $2,550.00
84422911 42" Heavy-Duty Coupler Bucket with 6 teeth (.59 cu. yd.) 760 LB $2,798.00
84404122 42" Ditching Pin-On Bucket (.60 cu. yd.) (.60 cu. yd.) $1,871.00
84404123 48" Ditching Pin-On Bucket (.70 cu. yd.) $1,947.0084422873 18" Heavy-Duty Pin-On Bucket with 3 teeth (.21 cu. yd.) 450 LB $1,375.00
84422885 24" Heavy-Duty Pin-On Bucket with 4 teeth (.31 cu. yd.) 530 LB $1,617.00
84422889 30" Heavy-Duty Pin-On Bucket with 5 teeth (.39 cu. yd.) 600 LB $1,802.00
84422894 36" Heavy-Duty Pin-On Bucket with 5 teeth (.48 cu. yd.) 685 LB $2,003.00
84422897 42" Heavy-Duty Pin-On Bucket with 6 teeth (.57 cu. yd.) 790 LB $2,196.00
47609053 KIT, THUMB, HYD, 2-TINE,use with bucket only (2 tine - for use with buckets with odd number of teeth)
425 LB $4,043.00
47609054 KIT, THUMB, HYD, 2-TINE,use with bucket and coupler (2 tine - for use with buckets with odd number of teeth)
475 LB $4,285.00
47625914 KIT, THUMB, HYD, 2-TINE,use with bucket only (2 tine - for use with buckets with even number of teeth)
425 LB $4,043.00
47625915 KIT, THUMB, HYD, 2-TINE,use with bucket and coupler (2 tine - for use with buckets with even number of teeth)
475 LB $4,285.00
3 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
Weight18,900 LBS
SD_E5320 ARM/DIPPERSTICK781172481265
SD_E5199 TRACK SHOES956001795600029560018
9560020
SD_47083 OPERATOR'S MANUAL781981461540781980
SD_E5443 CAB GUARD (FOPS)XE5443X481070
SD_E5444 CAB GUARD (FRONT)XE5444X461142461024
SD_E6410 AUXILIARY HYDRAULICSXE6410X461868
SD_E6417 SECONDARY AUXILIARY HYDRAULICSXE6417X461863
SD_E9702 REAR VIEW CAMERAXE9702X461504
SD_E9730 SAFETY VALVEXE9730X461559
SD_E9874 REFUEL PUMPXE9874X481257
CX80C CRAWLER EXCAVATOR - W/ DOZER BLADE US PRICE LIST
COMMERCIAL MODEL Factory Data List PriceCX80C $123,498.00
CX80C CRAWLER EXCAVATOR - W/ DOZER BLADE US PRICE LIST
Order Code Description Weight Factory Data List PriceARMS
5'7" (1.69 M) Arm No Charge7'2" (2.19 M) Arm $635.00
TRACK SHOES
18" (450mm) Steel Shoes, 3-bar No Charge
$1,146.00
23.6"(600mm) Steel Shoes $763.0018"(450mm)Bolt-on Rubber TrackRubber pads bolted on regular 18" track
$5,882.00
17.7"(450mm)Full Rubber Tracks $3,588.00LANGUAGE
English Literature No Charge
No Front Guard No ChargeFront Guard - Wire Mesh Screen $1,326.00Front Stone Guard (OPG L2)vertical bars (one piece/full length)
$2,324.00
No Optional Hydraulics No Charge
French Canadian Literature No ChargeSpanish Literature No Charge
ADDITIONAL EQUIPMENT CXMADDITIONAL OPTIONS
No FOPS Top Cab Guard No ChargeFOPS Top Cab Guard
Multi Function - ProportionalMulti-Function Auxiliary Hydraulics For use with multiple applications: hammers/thumbs/grapples/crushersDoes not include the in-cab Electronic Pressure Control featureJoystick activated with Electronic Proportional Controls Provides single or dual pump, two-way flowSecondary Low-flow Auxiliary Hydraulics can be addedIncludes manually adjustable relief valve to set required pressures Is switchable to single acting flow for hammer applicationsNotes:1) Not for use with other Auxiliary Hydraulics options with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C Series excavators.
$6,885.00
No Low Flow Circuit No ChargeSecondary Auxiliary HydraulicsSecondary Low Flow Auxiliary HydraulicsProvides low-flow for rotation or tilt hydraulic attachments. For use with Standard Boom option 481858Not for use with Offset Boom option 461025Joystick Activated with Electronic Proportional Controls
$4,039.00
No Rear View Camera No ChargeRear View Camera $646.00
No Hose Burst Check Valve No ChargeHose Burst Check ValveLocated on Boom and Arm Cylinder
$4,051.00
No Refuel Pump No ChargeRefuel Pump $1,296.00
4 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
Factory Supplied Attachments
Case Coupler Buckets
Case Multi Fit Coupler
Case Pin On Buckets
Direct Link Thumb
CX80C CRAWLER EXCAVATOR - W/ DOZER BLADE US PRICE LIST
Order Code Description Weight Factory Data List Price
84422902 18" Heavy-Duty Coupler Bucket with 3 teeth (.24 cu. yd.) 440 LB $1,749.00
84422903 24" Heavy-Duty Coupler Bucket with 4 teeth (.32 cu. yd.) 520 LB $2,067.00
84422906 30" Heavy-Duty Coupler Bucket with 5 teeth (.41 cu. yd.) 585 LB $2,292.00
84422909 36" Heavy-Duty Coupler Bucket with 5 teeth (.50 cu. yd.) 670 LB $2,550.00
84422911 42" Heavy-Duty Coupler Bucket with 6 teeth (.59 cu. yd.) 760 LB $2,798.00
47603261 Multi-Fit S Hyd.Pin Grabber Coupler Kit Full Kit and PinsOptimized for use with Case coupler buckets.Also can be used with a wide range of buckets from other manufacturers including pin-on types.Includes hydraulic installation kit and instructions.
205 LB $6,193.00
84404122 42" Ditching Pin-On Bucket (.60 cu. yd.) (.60 cu. yd.) $1,871.00
$4,285.00
84404123 48" Ditching Pin-On Bucket (.70 cu. yd.) $1,947.0084422873 18" Heavy-Duty Pin-On Bucket with 3 teeth (.21 cu. yd.) 450 LB $1,375.00
84422885 24" Heavy-Duty Pin-On Bucket with 4 teeth (.31 cu. yd.) 530 LB $1,617.00
84422889 30" Heavy-Duty Pin-On Bucket with 5 teeth (.39 cu. yd.) 600 LB $1,802.00
47625914 KIT, THUMB, HYD, 2-TINE,use with bucket only (2 tine - for use with buckets with even number of teeth)
425 LB $4,043.00
47625915 KIT, THUMB, HYD, 2-TINE,use with bucket and coupler (2 tine - for use with buckets with even number of teeth)
475 LB $4,285.00
84422894 36" Heavy-Duty Pin-On Bucket with 5 teeth (.48 cu. yd.) 685 LB $2,003.00
84422897 42" Heavy-Duty Pin-On Bucket with 6 teeth (.57 cu. yd.) 790 LB $2,196.00
47609053 KIT, THUMB, HYD, 2-TINE,use with bucket only (2 tine - for use with buckets with odd number of teeth)
425 LB $4,043.00
47609054 KIT, THUMB, HYD, 2-TINE,use with bucket and coupler (2 tine - for use with buckets with odd number of teeth)
475 LB
5 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
Weight28,400 LB30,400 LB
SD_E5408 WORKING LIGHTS488134488135
SD_E5311 BOOM481858
781917
SD_E5320 ARM/DIPPERSTICK461574781174781178XE5320X
SD_E5199 TRACK SHOES9560013
9560003
9560052
SD_47083 OPERATOR'S MANUAL461540781980781981
CX130D CRAWLER EXCAVATOR US PRICE LIST
COMMERCIAL MODEL Factory Data List PriceCX130D STD LC $186,269.00CX130D STD DZB $209,424.00
CX130D CRAWLER EXCAVATOR US PRICE LIST
Order Code Description Weight Factory Data List PriceLIGHTS
Halogen Working Lights No ChargeLED Working Lights8 LED light and 1 side camera:2 LED light are mounted on the front (1 on boom, 1 on house) 2 LED lights are mounted on the rear(above the rear view camera)1 LED light mounted on each side (2)2 LED lights mounted on the top of the cab
$2,754.00
BOOMS
Std Boom15'2" (4.63 M) Boom
No Charge
No BoomLess boom, hoist and arm cylinders and plumbing. Boom-foot and cylinder pins are provided.
($3,293.00)
ARMS
6'10" (2.11 m) HD Arm ($433.00)8'2" (2.50 m) Std Arm No Charge9'10" (3.01 m) Std Arm $737.00No Arm/DipperstickLess arm, bucket cylinder and linkage
($2,080.00)
TRACK SHOES
23.6" (600 mm) Steel ShoesTriple-Grouser Steel Shoes
No Charge
27.6" (700mm) TG Steel ShoesTriple-Grouser Steel Shoes
$1,245.00
20" (500mm) Rubber PadsSteel Chain with individual rubber pads (steel pads coated with rubber)
$10,106.00
LANGUAGE
French Canadian Literature No ChargeSpanish Literature No ChargeEnglish Literature No Charge
6 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
SD_E6410 AUXILIARY HYDRAULICSXE6410X461871
461869
SD_E6417 SECONDARY AUXILIARY HYDRAULICSXE6417X461863
SD_E5443 CAB GUARD (FOPS)XE5443X481070
SD_E5444 CAB GUARD (FRONT)XE5444X461142781986
461024
461552
SD_E5449 RAIN DEFLECTORXE5449X461555
CX130D CRAWLER EXCAVATOR US PRICE LIST
ADDITIONAL EQUIPMENT CXCHYDRAULIC OPTIONS
No Optional Hydraulics No ChargeThumb - Proportional SWDouble Acting Auxiliary Hydraulics For use with thumb applicationsJoystick Activated with Electronic Proportional Controls Provides single pump, two-way flowHydraulic plumbing provided to the end of the boom only, no piping to the armThis system is not switchable to single acting flowNotes:1) Not for use other Auxiliary Hydraulics options with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.
$5,714.00
MF w/ pressure setting - PropMulti-Function Auxiliary Hydraulics with Electronic Pressure Control (EPC)For use with multiple applications: hammers/thumbs/grapples/crushers.Includes in-cab Electronic Pressure Control featurePressure Control feature allows hydraulic pressure setting from the cab monitor and maintaining pressure settings in memory when multiple tools are used.Joystick Activated with Electronic Proportional ControlsProvides single or dual pump, two-way flow, Secondary Low-flow Auxiliary Hydraulics can be addedIncludes in-cab electronically controlled pressure setting feature Is switchable to single acting flow for hammer application.Notes:1) Not for use with other Auxiliary Hydraulics options, with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.
$9,331.00
No Low Flow Circuit No ChargeSecondary Auxiliary HydraulicsLow Flow Electrical Proportional Control Joystick ActivatedProvides low-flow for rotation or tilt of hydraulic tools.Notes:1) May be used stand alone or with any Case Excavator Auxiliary Hydraulics option.
$6,643.00
CAB OPTIONS
No FOPS Top Cab Guard No ChargeFOPS Top Cab Guard $1,146.00
No Front Guard No ChargeFront Guard - Wire Mesh Screen $1,326.00Front Stone Guard (OPG L1)vertical bars (two piece/upper and lower)
$1,973.00
Front Stone Guard (OPG L2)vertical bars (one piece/full length)
$2,324.00
Vandal GuardRemovable steel panels for front windshield
$574.00
No Rain Deflector No ChargeRain DeflectorNot for use with Front grill guard - 2 x 2 mesh option 461142, Front rock guard (OPG 1) option 781986, orFront rock guard (OPG 2) option 461024.
$380.00
7 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
SD_E5451 SUN VISORXE5451X461554
SD_E6300 EXCAVATOR BUCKET(S)XE6300X
SD_E5206 TRACK CHAIN GUIDEXE5206X461542
SD_E6400 MEC/HYD QUICK COUPLERXE6400X781128
SD_E9730 SAFETY VALVEXE9730X481064
SD_E9739 FULL VIEW CAMERAXE9739X488055
SD_E9874 REFUEL PUMPXE9874X481257
CX130D CRAWLER EXCAVATOR US PRICE LIST
No Charge
No Sun Visor No ChargeSun Visor $108.00
Hydraulic Quick Coupler ReadyDoes not come with coupler. Must order coupler from Factory Supplied Attachments section
$1,974.00
No Hose Burst Check Valve No ChargeHose Burst Check Valve (HBCV)Located on Boom and Arm Cylinder
$7,913.00
No max view monitor No Charge
BUCKETS
No BucketBuckets may be ordered using Order Codes listed in the Factory Supplied Attachments Section
No Charge
ADDITIONAL OPTIONS
No Track Chain Guide No ChargeDouble Track Chain Guide $728.00
No Quick Coupler
Case Max View Monitor $1,700.00
No Refuel Pump No ChargeRefuel Pump $1,296.00
8 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
Factory Supplied Attachments
Case Coupler
Case Coupler Buckets
Case Pin-On Buckets
Direct Link Thumb
Progressive Link Thumb
CX130D CRAWLER EXCAVATOR US PRICE LIST
Order Code Description Weight Factory Data List Price
47867959 Multi-Fit S Hyd.Pin Grabber Coupler Kit 551 LB $5,197.00
84404117 24" Heavy Duty (HD) Coupler Bucket with 4 teeth (.43 cu. yd.) $4,075.00
84404118 30" Heavy Duty (HD) Coupler Bucket with 4 teeth (.56 cu. yd.) $4,523.00
84404119 36" Heavy Duty (HD) Coupler Bucket with 5 teeth (.70 cu. yd.) $4,905.00
84404121 42" Heavy Duty (HD) Coupler Bucket with 5 teeth (.83 cu. yd.) $5,133.00
84404093 24" Heavy-Duty Pin-On Bucket with 4 teeth (.50 cu. yd.) $2,948.00
84404095 30" Heavy-Duty Pin-On Bucket with 4 teeth (.65 cu. yd.) $3,073.00
84404103 36" Heavy-Duty Pin-On Bucket with 5 teeth (.79 cu. yd.) 1,301 LB $3,329.00
84406310 42" Heavy-Duty Pin-On Bucket with 5 teeth (.93 cu. yd.) $3,740.00
84404105 24" HD Hi-Capacity Pin-On Bucket with 4 teeth (.58 cu. yd.) $3,158.00
84404108 30" HD Hi-Capacity Pin-On Bucket with 4 teeth (.74 cu. yd.) $3,505.00
84404109 36" HD Hi-Capacity Pin-On Bucket with 5 teeth (.91 cu. yd.) 1,433 LB $3,838.00
84404110 42" HD Hi-Capacity Pin-On Bucket with 5 teeth (1.08 cu. yd.) $4,097.00
84404113 48" Ditching Pin-On Bucket (.79 cu. yd.) $2,992.0084404115 60" Ditching Pin-On Bucket (1.02 cu yd.) $3,394.00
47609058 Hydraulic Main Pin Direct Link Thumb use with bucket only (2 tine) 830 LB $6,569.00
47609059 KIT, THUMB, HYD, 4-TINE,use with bucket only (3 tine)
860 LB $6,953.00
47609060 KIT, THUMB, HYD, 3-TINE,use with bucket and coupler (2 tine)
870 LB $6,813.00
47609061 KIT, THUMB, HYD, 4-TINE,use with bucket and coupler (3 tine)
910 LB $7,293.00
47609095 KIT, THUMB, PROG LINK, 3-use with bucket only (2 tine)
1,170 LB $8,256.00
47609096 KIT, THUMB, PROG LINK, 4-use with bucket only (3 tine)
1,200 LB $8,640.00
47609097 KIT, THUMB, PROG LINK, 3-use with bucket and coupler (2 tine)
1,200 LB $8,504.00
47609098 KIT, THUMB, PROG LINK, 4-use with bucket and coupler (3 tine)
1,210 LB $8,980.00
9 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
Weight32,100 LB33,600 LB
SD_E5408 WORKING LIGHTS488134488135
SD_E5311 BOOM481858
461025
781917
SD_E5320 ARM/DIPPERSTICK781174
461574
781178
XE5320X
SD_E5199 TRACK SHOES956001395600399560052
SD_47083 OPERATOR'S MANUAL781981461540781980
CX145D LC AND CX145D STD/DZ US PRICE LIST
COMMERCIAL MODEL Factory Data List PriceCX145D MSR LC $182,395.00CX145D MSR W/DOZER $192,622.00
CX145D LC AND CX145D STD/DZ US PRICE LIST
Order Code Description Weight Factory Data List PriceLIGHTS
Halogen Working Lights No ChargeLED Working Lights8 LED lights:2 LED light are mounted on the front (1 on boom, 1 on house) 2 LED lights are mounted on the rear(above the rear view camera)1 LED light mounted on each side (2)2 LED lights mounted on the top of the cab
$2,754.00
BOOMS
Std Boom15' 6" (4.72 M) Standard Boom
No Charge
Offset Boom15' 6" (4.72 M) Offset BoomFor use with CX145C/D MSR W/DOZER
$21,600.00
No BoomLess boom, hoist and arm cylinders and plumbing. Boom foot and cylinder pins are provided.
($3,378.00)
ARMS
8'2" (2.50 m) Std ArmFOR USE WITH STANDARD BOOM (options 481858)
No Charge
6'10" (2.11 m) HD ArmFOR USE WITH STANDARD BOOM (options 481858)(Recommended for heavy-duty applications - example: hammer)
$576.00
9'10" (3.01 m) Std ArmFOR USE WITH STANDARD BOOM (options 481858)
$1,089.00
No Arm/DipperstickLess arm, bucket cylinder and linkage
($2,051.00)
TRACK SHOES
23.6" (600 mm) Steel Shoes ($1,547.00)27.5" (700 mm) Steel Shoes No Charge20" (500mm) Rubber PadsSteel Chain with individual rubber pads (steel pads coated with rubber)
$8,277.00
LANGUAGE
English Literature No ChargeFrench Canadian Literature No ChargeSpanish Literature No Charge
10 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
SD_E6410 AUXILIARY HYDRAULICSXE6410X
461865
461869
461871
SD_E6417 SECONDARY AUXILIARY HYDRAULICSXE6417X461863
SD_E5443 CAB GUARD (FOPS)XE5443X481070
CX145D LC AND CX145D STD/DZ US PRICE LIST
ADDITIONAL EQUIPMENT CXCHYDRAULIC OPTIONS
No Optional Hydraulics No ChargeFor use with Standard Boom
Single Acting Auxiliary HydSingle Acting Auxiliary HydraulicsFor use with hammers or vibratory compaction plate applicationsJoystick activated with Electronic Proportional Controls Provides single direction flowIncludes manually adjustable relief valve to set required pressuresNotes:1) Not for use with other Auxiliary Hydraulic options, with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.
$7,027.00
MF w/ pressure setting - PropMulti-Function Auxiliary Hydraulics with Electronic Pressure Control (EPC)For use with multiple applications: hammers/thumbs/grapples/crushers.Includes in-cab Electronic Pressure Control feature Pressure Control feature allows hydraulic pressure setting from the cab monitor and maintaining pressure settings in memory when multiple tools are used.Joystick Activated with Electronic Proportional ControlsProvides single or dual pump, two-way flow, Secondary Low-flow Auxiliary Hydraulics can be addedIncludes in-cab electronically controlled pressure setting feature Is switchable to single acting flow for hammer application.Notes:1) Not for use with other Auxiliary Hydraulics options, with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.
$9,905.00
For use with Offset BoomThumb - Proportional SWDouble Acting Auxiliary Hydraulics For use with thumb applicationsJoystick Activated with Electronic Proportional Controls Provides single pump, two-way flowHydraulic plumbing provided to the end of the boom only, no piping to the armThis system is not switchable to single acting flowNotes:1) Not for use other Auxiliary Hydraulics options with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.
$5,864.00
No Low Flow Circuit No ChargeSecondary Auxiliary HydraulicsSecondary Low Flow Auxiliary HydraulicsProvides low-flow for rotation or tilt hydraulic attachments.For use with Standard Boom option 481858 Not for use with Offset Boom option 461025Joystick Activated with Electronic Proportional ControlsNotes:1) May be used stand alone or with any Case Excavator Auxiliary Hydraulics option.
$6,683.00
CAB OPTIONS
No FOPS Top Cab Guard No ChargeFOPS Top Cab Guard $1,146.00
11 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
SD_E5444 CAB GUARD (FRONT)XE5444X461142781986
461024
461552
SD_E5449 RAIN DEFLECTORXE5449X461555
SD_E5451 SUN VISORXE5451X461554
SD_E6300 EXCAVATOR BUCKET(S)XE6300X
SD_E5206 TRACK CHAIN GUIDEXE5206X461542
SD_E6400 MEC/HYD QUICK COUPLERXE6400X781128
SD_E9730 SAFETY VALVEXE9730X481064
SD_E9739 FULL VIEW CAMERAXE9739X488055
CX145D LC AND CX145D STD/DZ US PRICE LIST
No Front Guard No ChargeFront Guard - Wire Mesh Screen $1,326.00Front Stone Guard (OPG L1)vertical bars (two piece/upper and lower)
$1,973.00
Front Stone Guard (OPG L2)vertical bars (one piece/full length)
$2,324.00
Vandal GuardRemovable steel panels for front windshield
$574.00
No Rain Deflector No ChargeRain DeflectorNot for use with Front grill guard - 2 x 2 mesh option 461142, Front rock guard (OPG 1) option 781986, orFront rock guard (OPG 2) option 461024.
$380.00
No Sun Visor No ChargeSun Visor $108.00
BUCKETS
No BucketBuckets may be ordered using Order Codes listed in the Factory Supplied Attachments Section
No Charge
ADDITIONAL OPTIONS
No Track Chain Guide No ChargeDouble Track Chain Guide $728.00
No Quick Coupler No ChargeHydraulic Quick Coupler ReadyOnly available on the D series
$2,304.00
No Hose Burst Check Valve No ChargeHose Burst Check Valve (HBCV)Located on Boom and Arm Cylinder
$8,667.00
No max view monitor No ChargeCase Max View Monitor $1,700.00
12 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
Factory Supplied Attachments
Case Coupler Buckets
Case Pin-On Buckets
Direct Link Thumb
CX145D LC AND CX145D STD/DZ US PRICE LIST
Order Code Description Weight Factory Data List Price
84404117 24" Heavy Duty (HD) Coupler Bucket with 4 teeth (.43 cu. yd.) $4,075.00
84404118 30" Heavy Duty (HD) Coupler Bucket with 4 teeth (.56 cu. yd.) $4,523.00
84404119 36" Heavy Duty (HD) Coupler Bucket with 5 teeth (.70 cu. yd.) $4,905.00
84404121 42" Heavy Duty (HD) Coupler Bucket with 5 teeth (.83 cu. yd.) $5,133.00
84404093 24" Heavy-Duty Pin-On Bucket with 4 teeth (.50 cu. yd.) $2,948.00
84404095 30" Heavy-Duty Pin-On Bucket with 4 teeth (.65 cu. yd.) $3,073.00
84404103 36" Heavy-Duty Pin-On Bucket with 5 teeth (.79 cu. yd.) 1,301 LB $3,329.00
84406310 42" Heavy-Duty Pin-On Bucket with 5 teeth (.93 cu. yd.) $3,740.00
84404105 24" HD Hi-Capacity Pin-On Bucket with 4 teeth (.58 cu. yd.) $3,158.00
84404108 30" HD Hi-Capacity Pin-On Bucket with 4 teeth (.74 cu. yd.) $3,505.00
84404109 36" HD Hi-Capacity Pin-On Bucket with 5 teeth (.91 cu. yd.) 1,433 LB $3,838.00
84404110 42" HD Hi-Capacity Pin-On Bucket with 5 teeth (1.08 cu. yd.) $4,097.00
84404113 48" Ditching Pin-On Bucket (.79 cu. yd.) $2,992.0084404115 60" Ditching Pin-On Bucket (1.02 cu yd.) $3,394.00
47609058 Hydraulic Main Pin Direct Link Thumb use with bucket only (2 tine) 830 LB $6,569.00
$5,197.00
47609059 KIT, THUMB, HYD, 4-TINE,use with bucket only (3 tine)
860 LB $6,953.00
47609060 KIT, THUMB, HYD, 3-TINE,use with bucket and coupler (2 tine)
870 LB $6,813.00
47609061 KIT, THUMB, HYD, 4-TINE,use with bucket and coupler (3 tine)
910 LB $7,293.00
47609095 KIT, THUMB, PROG LINK, 3-use with bucket only (2 tine)
1,170 LB $8,256.00
47609096 KIT, THUMB, PROG LINK, 4-use with bucket only (3 tine)
1,200 LB $8,640.00
47609097 KIT, THUMB, PROG LINK, 3-use with bucket and coupler (2 tine)
1,200 LB $8,504.00
47609098 KIT, THUMB, PROG LINK, 4-use with bucket and coupler (3 tine)
1,210 LB $8,980.00
47867959 Multi-Fit S Hyd.Pin Grabber Coupler Kit 551 LB
13 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
Weight38,400 LB
SD_E5408 WORKING LIGHTS488134488135
SD_E5311 BOOM481858
781917
SD_E5320 ARM/DIPPERSTICK781176781178XE5320X
SD_E5199 TRACK SHOES9560013
9560003
SD_47083 OPERATOR'S MANUAL781981461540781980
SD_E6410 AUXILIARY HYDRAULICSXE6410X
461865
CX160D CRAWLER EXCAVATOR (STD LC) US PRICE LIST
COMMERCIAL MODEL Factory Data List PriceCX160D STD LC $223,212.00
CX160D CRAWLER EXCAVATOR (STD LC) US PRICE LIST
Order Code Description Weight Factory Data List PriceLIGHTS
Halogen Working Lights No ChargeLED Working Lights8 LED light and 1 side camera:2 LED light are mounted on the front (1 on boom, 1 on house) 2 LED lights are mounted on the rear(above the rear view camera)1 LED light mounted on each side (2)2 LED lights mounted on the top of the cab
$2,754.00
BOOMS
Std Boom16' 11" (5.15 m) Standard Boom
No Charge
No BoomLess boom, hoist and arm cylinders and plumbing. Boom-foot and cylinder pins are provided.
($4,767.00)
ARMS
8'7" (2.63 m) Std Arm No Charge9'10" (3.01 m) Std Arm $1,300.00No Arm/DipperstickLess arm, bucket cylinder and linkage
($2,600.00)
TRACK SHOES
23.6" (600 mm) Steel ShoesTriple-Grouser Steel Shoes
No Charge
27.6" (700mm) TG Steel ShoesTriple-Grouser Steel Shoes
$1,612.00
LANGUAGE
English Literature No ChargeFrench Canadian Literature No ChargeSpanish Literature No Charge
ADDITIONAL EQUIPMENT CXCHYDRAULIC OPTIONS
No Optional Hydraulics No ChargeNot for use with No Boom
Single Acting Auxiliary HydSingle Acting Auxiliary HydraulicsFor use with hammers or vibratory compaction plate applicationsJoystick activated with Electronic Proportional Controls Provides single direction flowIncludes manually adjustable relief valve to set required pressuresNotes:1) Not for use with other Auxiliary Hydraulic options, with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.
$7,271.00
14 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
461871
461869
SD_E6417 SECONDARY AUXILIARY HYDRAULICSXE6417X461863
SD_E5443 CAB GUARD (FOPS)XE5443X481070
SD_E5444 CAB GUARD (FRONT)XE5444X461142781986
461024
461552
SD_E5449 RAIN DEFLECTORXE5449X461555
SD_E5451 SUN VISORXE5451X461554
CX160D CRAWLER EXCAVATOR (STD LC) US PRICE LIST
Thumb - Proportional SWDouble Acting Auxiliary Hydraulics For use with thumb applicationsJoystick Activated with Electronic Proportional Controls Provides single pump, two-way flowHydraulic plumbing provided to the end of the boom only, no piping to the armThis system is not switchable to single acting flowNotes:1) Not for use other Auxiliary Hydraulics options with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.
$6,012.00
MF w/ pressure setting - PropMulti-Function Auxiliary Hydraulics with Electronic Pressure Control (EPC)For use with multiple applications: hammers/thumbs/grapples/crushers.Includes in-cab Electronic Pressure Control feature Pressure Control feature allows hydraulic pressure setting from the cab monitor and maintaining pressure settings in memory when multiple tools are used.Joystick Activated with Electronic Proportional ControlsProvides single or dual pump, two-way flow, Secondary Low-flow Auxiliary Hydraulics can be addedIncludes in-cab electronically controlled pressure setting feature Is switchable to single acting flow for hammer application.Notes:1) Not for use with other Auxiliary Hydraulics options, with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.
$9,905.00
No Low Flow Circuit No ChargeSecondary Auxiliary HydraulicsSecondary Low Flow Auxiliary HydraulicsProvides low-flow for rotation or tilt hydraulic attachments.For use with Standard Boom option 481858 Not for use with Offset Boom option 461025Joystick Activated with Electronic Proportional ControlsNotes:1) May be used stand alone or with any Case Excavator Auxiliary Hydraulics option.
$6,721.00
CAB OPTIONS
No FOPS Top Cab Guard No ChargeFOPS Top Cab Guard $1,146.00
No Rain Deflector No ChargeRain DeflectorNot for use with Front grill guard - 2 x 2 mesh option 461142, Front rock guard (OPG 1) option 781986, orFront rock guard (OPG 2) option 461024.
$380.00
No Sun Visor No ChargeSun Visor $108.00
No Front Guard No ChargeFront Guard - Wire Mesh Screen $1,326.00Front Stone Guard (OPG L1)vertical bars (two piece/upper and lower)
$1,973.00
Front Stone Guard (OPG L2)vertical bars (one piece/full length)
$2,324.00
Vandal GuardRemovable steel panels for front windshield
$574.00
15 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
SD_E6300 EXCAVATOR BUCKET(S)XE6300X
SD_E5206 TRACK CHAIN GUIDE461541461143
SD_E6400 MEC/HYD QUICK COUPLERXE6400X781128
SD_E9730 SAFETY VALVEXE9730X481064
SD_E9739 FULL VIEW CAMERAXE9739X488055
SD_E9874 REFUEL PUMPXE9874X481257
CX160D CRAWLER EXCAVATOR (STD LC) US PRICE LIST
BUCKETS
No BucketBuckets may be ordered using Order Codes listed in the Factory Supplied Attachments Section
No Charge
ADDITIONAL OPTIONS
Single Track Chain Guide No ChargeTriple Track Chain Guide $1,123.00
No Quick Coupler No ChargeHydraulic Quick Coupler ReadyDoes not come with coupler. Must order coupler from Factory Supplied Attachments section
$2,079.00
No Hose Burst Check Valve No ChargeHose Burst Check Valve (HBCV)Located on Boom and Arm Cylinder
$7,913.00
No max view monitor No ChargeCase Max View Monitor $1,700.00
No Refuel Pump No ChargeRefuel Pump $1,296.00
16 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
Factory Supplied Attachments
Case Coupler
Case Coupler Buckets
Case Pin-On Buckets
Direct Link Thumb
Progressive Link Thumb
CX160D CRAWLER EXCAVATOR (STD LC) US PRICE LIST
Order Code Description Weight Factory Data List Price
47867960 Multi-Fit S Hyd.Pin Grabber Coupler Kit 793 LB $5,620.00
84404140 24" Heavy-Duty Coupler Bucket with 4 teeth (.51 cu. yd.) $4,495.00
84404141 30" Heavy-Duty Coupler Bucket wtih 4 teeth (.66 cu. yd.) $4,924.00
84404142 36" Heavy-Duty Coupler Bucket with 5 teeth (.81 cu. yd.) $5,193.00
84404143 42" Heavy-Duty Coupler Bucket with 5 teeth (.97 cu. yd.) $5,490.00
84404124 24" Heavy-Duty Pin-On Bucket with 4 teeth (.58 cu. yd.) $3,574.00
84404125 30" Heavy-Duty Pin-On Bucket with 4 teeth (.74 cu. yd.) $3,718.00
84404126 36" Heavy-Duty Pin-On Bucket with 5 teeth (.91 cu. yd.) $3,931.00
84404129 42" Heavy-Duty Pin-On Bucket with 5 teeth (1.08 cu. yd.) $4,163.00
84404131 24" HD Hi-Capacity Pin-On Bucket with 4 teeth (.65 cu. yd.) $3,522.00
84404132 30" HD Hi-Capacity Pin-On Bucket with 4 teeth (.84 cu. yd.) $3,772.00
84404133 36" HD Hi-Capacity Pin-On Bucket with 5 teeth (10.3 cu. yd.) $3,993.00
84404134 42" Heavy-Duty Pin-On Bucket wtih 5 teeth (1.22 cu. yd.) $4,392.00
$9,725.00
84404136 48" Ditching Pin-On Bucket (.79 cu. yd.) $2,799.0084404139 60" Ditching Pin-On Bucket (1.02 cu yd.) $3,176.00
47609064 KIT, THUMB, HYD, 3-TINE,use with bucket only (3 tine)
840 LB $7,220.00
47609065 KIT, THUMB, HYD, 4-TINE,use with bucket only (4 tine)
860 LB $7,639.00
47609104 KIT, THUMB, PROG LINK, 3- 1,325 LB $9,591.0047609106 Progressive Link Thumb Kit with Coupler use with bucket and coupler (4
tine)1,345 LB $10,037.00
47609066 KIT, THUMB, HYD, 3-TINE,use with bucket and coupler (3 tine)
985 LB $7,504.00
47609067 KIT, THUMB, HYD, 4-TINE,use with bucket and coupler (4 tine)
1,005 LB $7,951.00
47609102 KIT, THUMB, PROG LINK, 3-use with bucket only (3 tine)
1,180 LB $9,307.00
47609103 KIT, THUMB, PROG LINK, 4-use with bucket only (4 tine)
1,200 LB
17 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
Weight48,900 LB48,100 LB
SD_E5408 WORKING LIGHTS488134488135
SD_E5311 BOOM481858
781917
SD_E5320 ARM/DIPPERSTICK461501
481268
XE5320X
SD_E5199 TRACK SHOES9560013
9560003
9560005
9560007
9560055
SD_47083 OPERATOR'S MANUAL781981461540781980
SD_E6410 AUXILIARY HYDRAULICSXE6410X
CX210D CRAWLER EXCAVATOR (STD LC & NRRW) US PRICE LIST
COMMERCIAL MODEL Factory Data List PriceCX210D STD LC $258,171.00CX210D NRRW $256,176.00Includes the following Equipment23.6" (600 mm) Steel Shoes (9560013) ($867.00)
CX210D CRAWLER EXCAVATOR (STD LC & NRRW) US PRICE LIST
Order Code Description Weight Factory Data List PriceLIGHTS
Halogen Working Lights No ChargeLED Working Lights8 LED light and 1 side camera:2 LED light are mounted on the front (1 on boom, 1 on house) 2 LED lights are mounted on the rear(above the rear view camera)1 LED light mounted on each side (2)2 LED lights mounted on the top of the cab
$2,754.00
BOOMS
Std Boom18'8" (5.70 M) Standard Boom
No Charge
No BoomLess boom, hoist and arm cylinders and plumbing. Boom-foot and cylinder pins are provided.Not for use with CX210D NRRW
($5,374.00)
ARMS
7'10" (2.40 m) HD ArmFor use with 18'8" Standard Boom (option 481858) (Recommended for heavy-duty applications - example: hammer)
($548.00)
9'8" (2.94 M) ArmFor use with 18'8" Standard Boom (option 481858)
No Charge
No Arm/DipperstickLess arm, bucket cylinder and linkage
($3,033.00)
TRACK SHOES
23.6" (600 mm) Steel ShoesTriple-Grouser Steel ShoesFor use with CX210D STD LC and CX210D NRRW
($867.00)
27.6" (700mm) TG Steel ShoesTriple-Grouser Steel Shoes For use with CX210D STD LC
($351.00)
31.5" (800 mm) TG Steel ShoesTriple-Grouser Steel Shoes For use with CX210D STD LC
No Charge
35.4" (900 mm) Steel ShoesTriple-Grouser Steel ShoesFor use with CX210D STD LC commercial model only
$1,456.00
23.6" (600 mm) Rubber PadsRubber pads molded to steel base on standard chain For use with CX210D STD LC and CX210D NRRW
$12,134.00
LANGUAGE
English Literature No ChargeFrench Canadian Literature No ChargeSpanish Literature No Charge
ADDITIONAL EQUIPMENT CXCHYDRAULIC OPTIONS
No Optional Hydraulics No Charge
18 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
461865
461871
461869
SD_E6417 SECONDARY AUXILIARY HYDRAULICSXE6417X461863
SD_E5443 CAB GUARD (FOPS)XE5443X481070
SD_E5444 CAB GUARD (FRONT)XE5444X461142781986
461024
461552
CX210D CRAWLER EXCAVATOR (STD LC & NRRW) US PRICE LIST
Not for use with No BoomSingle Acting Auxiliary HydSingle Acting Auxiliary HydraulicsFor use with hammers or vibratory compaction plate applicationsJoystick activated with Electronic Proportional Controls Provides single direction flowIncludes manually adjustable relief valve to set required pressuresNotes:1) Not for use with other Auxiliary Hydraulic options, with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.
$8,499.00
Thumb - Proportional SWDouble Acting Auxiliary Hydraulics For use with thumb applicationsJoystick Activated with Electronic Proportional Controls Provides single pump, two-way flowHydraulic plumbing provided to the end of the boom only, no piping to the armThis system is not switchable to single acting flowNotes:1) Not for use other Auxiliary Hydraulics options with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.
$6,599.00
MF w/ pressure setting - PropMulti-Function Auxiliary Hydraulics with Electronic Pressure Control (EPC)For use with multiple applications: hammers/thumbs/grapples/crushers.Includes in-cab Electronic Pressure Control featurePressure Control feature allows hydraulic pressure setting from the cab monitor and maintaining pressure settings in memory when multiple tools are used.Joystick Activated with Electronic Proportional ControlsProvides single or dual pump, two-way flow, Secondary Low-flow Auxiliary Hydraulics can be addedIncludes in-cab electronically controlled pressure setting feature Is switchable to single acting flow for hammer application.Notes:1) Not for use with other Auxiliary Hydraulics options, with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.
$11,374.00
No Low Flow Circuit No ChargeSecondary Auxiliary HydraulicsSecondary Low Flow Auxiliary HydraulicsProvides low-flow for rotation or tilt hydraulic attachments.For use with Standard Boom option 481858Joystick Activated with Electronic Proportional ControlsNotes:1) May be used stand alone or with any Case Excavator Auxiliary Hydraulics option.
$7,039.00
CAB OPTIONS
No FOPS Top Cab Guard No ChargeFOPS Top Cab Guard $1,146.00
No Front Guard No ChargeFront Guard - Wire Mesh Screen $1,326.00Front Stone Guard (OPG L1)vertical bars (two piece/upper and lower)
$1,973.00
Front Stone Guard (OPG L2)vertical bars (one piece/full length)
$2,324.00
Vandal GuardRemovable steel panels for front windshield
$574.00
19 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
SD_E5449 RAIN DEFLECTORXE5449X461555
SD_E5451 SUN VISORXE5451X461554
SD_E6300 EXCAVATOR BUCKET(S)XE6300X
SD_02005 ENGINE PRE-CLEANERX02005X488031
SD_E5206 TRACK CHAIN GUIDE461541461143
SD_E5407 COOLING PACKAGEXE5407X481027
SD_E6400 MEC/HYD QUICK COUPLERXE6400X781128
SD_E9730 SAFETY VALVEXE9730X481064
SD_E9739 FULL VIEW CAMERAXE9739X488055
SD_E9742 REVERSIBLE FANXE9742X488121
SD_E9874 REFUEL PUMPXE9874X481257
CX210D CRAWLER EXCAVATOR (STD LC & NRRW) US PRICE LIST
No Rain Deflector No ChargeRain DeflectorNot for use with Front grill guard - 2 x 2 mesh option 461142, Front rock guard (OPG 1) option 781986, orFront rock guard (OPG 2) option 461024.
$380.00
No Sun Visor No ChargeSun Visor $108.00
BUCKETS
No BucketBuckets may be ordered using Order Codes listed in the Factory Supplied Attachments Section
No Charge
ADDITIONAL OPTIONS
No Pre-Cleaner No ChargePre-Cleaner Cyclone $470.00
Single Track Chain Guide No ChargeTriple Track Chain Guide $1,123.00
Standard Cooling Package No ChargeTropical Cooling PackageHigh ambient temperature cooling package Includes hardware to support the cooling of the main machine systems.Must also order: Pre-Cleaner Cyclone option 488031 Note: Recommended for machines operating in high heat conditions not to exceed 122°F (50°C)Not for use with CX210D NRRW
$504.00
No Quick Coupler No ChargeHydraulic Quick Coupler ReadyDoes not come with coupler. Must order coupler from Factory Supplied Attachments section
$2,188.00
No Hose Burst Check Valve No ChargeHose Burst Check Valve (HBCV)Located on Boom and Arm Cylinder
$7,913.00
No max view monitor No ChargeCase Max View Monitor $1,700.00
No Reversible Fan No ChargeReversible FanVariable pitch reversing fan features rotating blades, that provides maximum airflow in either direction when engaged by operator.
$8,709.00
No Refuel Pump No ChargeRefuel Pump $1,296.00
20 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
Factory Supplied Attachments
Case Coupler Buckets
Case Pin On Buckets
Coupler
Direct Link Thumb
Progressive Link Thumb
CX210D CRAWLER EXCAVATOR (STD LC & NRRW) US PRICE LIST
Order Code Description Weight Factory Data List Price
84404187 24" Heavy-Duty Coupler Bucket with 4 teeth (.63 cu. yd.) $5,418.00
84404188 30" Heavy-Duty Coupler Bucket with 4 teeth (.82 cu. yd.) $5,958.00
84404189 36" Heavy-Duty Coupler Bucket with 5 teeth (1.02 cu. yd.) $6,556.00
84404190 42" Heavy-Duty Coupler Bucket with 5 teeth (1.20 cu. yd.) $7,213.00
84404191 48" Heavy-Duty Coupler Bucket with 6 teeth (1.48 cu. yd.) $7,622.00
84404166 24" Heavy-Duty Pin-On Bucket with 4 teeth (.50 cu. yd.) $3,997.00
84404167 30" Heavy-Duty Pin-On Bucket with 4 teeth (.84 cu. yd.) $4,475.00
84404168 36" Heavy-Duty Pin-On Bucket with 5 teeth (1.03 cu. yd.) $4,884.00
84404169 42" Heavy-Duty Pin-On Bucket with 5 teeth (1.22 cu. yd.) $5,265.00
84404170 24" HD Hi-Capacity Pin-On Bucket with 4 teeth (.79 cu. yd.) $4,322.00
84404175 30" HD Hi-Capacity Pin-On Bucket with 4 teeth (1.02 cu. yd.) $4,775.00
84404178 36" HD Hi-Capacity Pin-On Bucket with 5 teeth (1.25 cu. yd.) $5,278.00
84404179 42" HD Hi-Capacity Pin-On Bucket with 5 teeth (1.48 cu. yd.) $5,542.00
84404180 48" HD Hi-Capacity Pin-On Bucket with 6 teeth (1.72 cu. yd.) 2,650 LB $6,056.00
84404181 24" Severe-Duty Pin-On Bucket with 4 teeth (.65 cu. yd.) $5,404.00
84404182 30" Severe-Duty Pin-On Bucket with 4 teeth (.84 cu. yd.) $6,054.00
84404183 36" Severe-Duty Pin-On Bucket with 5 teeth (1.03 cu. yd.) $6,780.00
84404184 42" Severe-Duty Pin-On Bucket with 5 teeth (1.22 cu. yd.) $7,015.00
84404185 60" Ditching Pin-On Bucket (1.02 cu yd.) $3,620.0084404186 72" Ditching Pin-On Bucket(1.22 cu. yd.) $3,921.0084405214 48" Heavy-Duty Pin-On Bucket $5,360.00
47855901 KIT, COUPLER, MULTI-FIT S 683 LB $5,882.00
$11,660.00
47609071 KIT, THUMB, HYD, 3-TINE,use with bucket only (3 tine)
1,155 LB $8,604.00
47609072 KIT, THUMB, HYD, 4-TINE,use with bucket only (4 tine)
1,190 LB $9,089.00
47609073 KIT, THUMB, HYD, 3-TINE,use with bucket and coupler (3 tine)
1,300 LB $8,972.00
47609074 KIT, THUMB, HYD, 4-TINE,use with bucket and coupler (4 tine)
1,325 LB $9,573.00
47609109 KIT, THUMB, PROG LINK, 3-use with bucket only (3 tine)
1,680 LB $11,176.00
47609110 KIT, THUMB, PROG LINK, 4-use with bucket only (4 tine)
1,680 LB $11,176.00
47609111 KIT, THUMB, PROG LINK, 3-use with bucket and coupler (4 tine)
1,825 LB $11,059.00
47609112 KIT, THUMB, PROG LINK, 4-use with bucket and coupler (3 tine)
1,850 LB
21 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
Weight49,090 LB
SD_E5408 WORKING LIGHTS488134488135
SD_E5311 BOOM461029
SD_E5320 ARM/DIPPERSTICK481248
SD_E5199 TRACK SHOES9560005
9560007
SD_47083 OPERATOR'S MANUAL781981461540781980
SD_E6417 SECONDARY AUXILIARY HYDRAULICSXE6417X461863
SD_E5443 CAB GUARD (FOPS)XE5443X481070
SD_E5444 CAB GUARD (FRONT)XE5444X461142781986
461024
461552
CX210D LONG REACH CRAWLER EXCAVATOR (LR) US PRICE LIST
COMMERCIAL MODEL Factory Data List PriceCX210D LR $296,852.00
CX210D LONG REACH CRAWLER EXCAVATOR (LR) US PRICE LIST
Order Code Description Weight Factory Data List PriceLIGHTS
Halogen Working Lights No ChargeLED Working Lights8 LED light and 1 side camera:2 LED light are mounted on the front (1 on boom, 1 on house) 2 LED lights are mounted on the rear(above the rear view camera)1 LED light mounted on each side (2)2 LED lights mounted on the top of the cab
$2,754.00
BOOMS
Standard Long Reach Boom28'7" (8.70 M) Long Reach Boom
No Charge
ARMS
21'0" (6.40 M) Arm No ChargeTRACK SHOES
31.5" (800 mm) TG Steel ShoesTriple-Grouser Steel Shoes
No Charge
35.4" (900 mm) Steel ShoesTriple-Grouser Steel Shoes
$1,456.00
LANGUAGE
English Literature No ChargeFrench Canadian Literature No ChargeSpanish Literature No Charge
ADDITIONAL EQUIPMENT CXCHYDRAULIC OPTIONS
No Low Flow Circuit No ChargeSecondary Auxiliary HydraulicsSecondary Low Flow Auxiliary HydraulicsProvides low-flow for rotation or tilt hydraulic attachments. Joystick Activated with Electronic Proportional ControlsNotes:1) May be used stand alone or with any Case Excavator Auxiliary Hydraulics option.
$7,874.00
CAB OPTIONS
No FOPS Top Cab Guard No ChargeFOPS Top Cab Guard $1,146.00
No Front Guard No ChargeFront Guard - Wire Mesh Screen $1,326.00Front Stone Guard (OPG L1)vertical bars (two piece/upper and lower)
$1,973.00
Front Stone Guard (OPG L2)vertical bars (one piece/full length)
$2,324.00
Vandal GuardRemovable steel panels for front windshield
$574.00
22 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
SD_E5449 RAIN DEFLECTORXE5449X461555
SD_E5451 SUN VISORXE5451X461554
SD_E6300 EXCAVATOR BUCKET(S)XE6300X
SD_02005 ENGINE PRE-CLEANERX02005X488031
SD_E5206 TRACK CHAIN GUIDE461541461143
SD_E5407 COOLING PACKAGEXE5407X481027
SD_E6400 MEC/HYD QUICK COUPLERXE6400X781128
SD_E9730 SAFETY VALVEXE9730X481064
SD_E9739 FULL VIEW CAMERAXE9739X488055
SD_E9874 REFUEL PUMPXE9874X481257
Factory Supplied Attachments
Case Pin On Buckets
Direct Link Thumb
No Rain Deflector No ChargeRain DeflectorNot for use with Front grill guard - 2 x 2 mesh option 461142, Front rock guard (OPG 1) option 781986, orFront rock guard (OPG 2) option 461024.
$380.00
No Sun Visor No ChargeSun Visor $108.00
CX210D LONG REACH CRAWLER EXCAVATOR (LR) US PRICE LIST
BUCKETS
No BucketBuckets may be ordered using Order Codes listed in the Factory Supplied Attachments section
No Charge
ADDITIONAL OPTIONS
No Pre-Cleaner No ChargePre-Cleaner Cyclone $470.00
Single Track Chain Guide No ChargeTriple Track Chain Guide $1,123.00
Standard Cooling Package No ChargeTropical Cooling PackageHigh ambient temperature cooling package Includes Pre-Cleaner Cyclone option 488031Note: Recommended for machines operating in high heatconditions not to exceed 122°F (50°C)
$504.00
No Quick Coupler No ChargeHydraulic Quick Coupler ReadyDoes not come with coupler. Must order coupler from Factory Supplied Attachments section
$2,187.00
No Hose Burst Check Valve No ChargeHose Burst Check Valve (HBCV)Located on Boom and Arm Cylinder
$7,913.00
No max view monitor No ChargeCase Max View Monitor $1,700.00
No Refuel Pump No Charge
KIT, THUMB, HYD, 4-TINE,use with bucket and coupler (3 tine)
910 LB $7,293.00
Refuel Pump $1,296.00CX210D LONG REACH CRAWLER EXCAVATOR (LR) US PRICE LIST
Order Code Description Weight Factory Data List Price
84404113 48" Ditching Pin-On Bucket (.79 cu. yd.) $2,992.0084404115 60" Ditching Pin-On Bucket (1.02 cu yd.) $3,394.00
47609058 Hydraulic Main Pin Direct Link Thumb use with bucket only (2 tine) 830 LB $6,569.00
47609059 KIT, THUMB, HYD, 4-TINE,use with bucket only (3 tine)
860 LB $6,953.00
47609060 KIT, THUMB, HYD, 3-TINE,use with bucket and coupler (2 tine)
870 LB $6,813.00
47609061
23 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
Weight56,900 LB60,400 LB
SD_E5408 WORKING LIGHTS488134488135
SD_E5311 BOOM481858
781917
SD_E5320 ARM/DIPPERSTICK481268
461501
XE5320X
SD_E5199 TRACK SHOES9560007
9560013956003995600469560055
SD_47083 OPERATOR'S MANUAL781981461540781980
SD_E6300 EXCAVATOR BUCKET(S)XE6300X
SD_E6423 CONTROL PATTERN SELECTION461558
SD_E6410 AUXILIARY HYDRAULICSXE6410X
CX245D LC AND CX245D LC DZ US PRICE LIST
COMMERCIAL MODEL Factory Data List PriceCX245D MSR LC $276,626.00CX245D MSR LC W/DOZER $318,359.00
CX245D LC AND CX245D LC DZ US PRICE LIST
Order Code Description Weight Factory Data List PriceLIGHTS
Halogen Working Lights No ChargeLED Working Lights8 LED lights:2 LED light are mounted on the front (1 on boom, 1 on house) 2 LED lights are mounted on the rear(above the rear view camera)1 LED light mounted on each side (2)2 LED lights mounted on the top of the cab
$2,754.00
BOOMS
Std Boom18'8" (5.70 M) Standard BoomFor use with CX235C MSR LC and CX235C MSR w/dozer commercial models.
No Charge
No BoomLess boom, hoist and arm cylinders and plumbing. Boom-foot and cylinder pins are provided.
($6,057.00)
ARMS
9'8" (2.94 M) ArmFor use wtih 18'8" Standard Boom (option 481858)
No Charge
7'10" (2.40 m) HD ArmFor use with 18'8" Standard Boom (option 481858) (Recommended for heavy-duty applications - example: hammer)
($273.00)
No Arm/DipperstickLess arm, bucket cylinder and linkage
($3,142.00)
TRACK SHOES
35.4" (900 mm) Steel ShoesTriple-Grouser Steel ShoesNot for use with the CX245D MSR with Dozer Blade
$1,456.00
23.6" (600 mm) Steel Shoes ($1,547.00)27.5" (700 mm) Steel Shoes ($178.00)31.5" (800 mm) Steel Shoes No Charge23.6" (600 mm) Rubber PadsSteel Chain with individual rubber tracks (steel base coated with rubber)
$12,118.00
LANGUAGE
English Literature No ChargeFrench Canadian Literature No ChargeSpanish Literature No Charge
BUCKETS
No Bucket No ChargeADDITIONAL EQUIPMENT CXCPLUMBING AND ACTUATION FOR AUXILIARY HYDRAULICS
Control Pattern Selector Valve No ChargeHYDRAULIC OPTIONS
No Optional Hydraulics No Charge
24 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
461865
461871
461869
SD_E6417 SECONDARY AUXILIARY HYDRAULICSXE6417X461863
SD_E5443 CAB GUARD (FOPS)XE5443X481070
CX245D LC AND CX245D LC DZ US PRICE LIST
Single Acting Auxiliary HydSingle Acting Auxiliary HydraulicsFor use with hammers or vibratory compaction plate applicationsJoystick activated with Electronic Proportional Controls Provides single direction flowIncludes manually adjustable relief valve to set required pressuresNotes:1) Not for use with other Auxiliary Hydraulic options, with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.
$8,606.00
Thumb - Proportional SWDouble Acting Auxiliary Hydraulics For use with thumb applicationsJoystick Activated with Electronic Proportional Controls Provides single pump, two-way flowHydraulic plumbing provided to the end of the boom only, no piping to the armThis system is not switchable to single acting flowNotes:1) Not for use other Auxiliary Hydraulics options with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.
$6,719.00
MF w/ pressure setting - PropMulti-Function Auxiliary Hydraulics with Electronic Pressure Control (EPC)For use with multiple applications: hammers/thumbs/grapples/crushers.Includes in-cab Electronic Pressure Control featurePressure Control feature allows hydraulic pressure setting from the cab monitor and maintaining pressure settings in memory when multiple tools are used.Joystick Activated with Electronic Proportional ControlsProvides single or dual pump, two-way flow, Secondary Low-flow Auxiliary Hydraulics can be addedIncludes in-cab electronically controlled pressure setting feature Is switchable to single acting flow for hammer application.Notes:1) Not for use with other Auxiliary Hydraulics options, with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.
$11,471.00
No Low Flow Circuit No ChargeSecondary Auxiliary HydraulicsSecondary Low Flow Auxiliary HydraulicsProvides low-flow for rotation or tilt hydraulic attachments.For use with Standard Boom option 481858 Not for use with Offset Boom option 461025Joystick Activated with Electronic Proportional ControlsNotes:1) May be used stand alone or with any Case Excavator Auxiliary Hydraulics option.
$7,105.00
CAB OPTIONS
No FOPS Top Cab Guard No ChargeFOPS Top Cab Guard $1,146.00
25 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
SD_E5444 CAB GUARD (FRONT)XE5444X461142781986
461024
461552
SD_E5449 RAIN DEFLECTORXE5449X461555
SD_E5451 SUN VISORXE5451X461554
SD_E5206 TRACK CHAIN GUIDE461541461143
SD_E6400 MEC/HYD QUICK COUPLERXE6400X781128
SD_E9730 SAFETY VALVEXE9730X
481064
SD_E9739 FULL VIEW CAMERAXE9739X488055
CX245D LC AND CX245D LC DZ US PRICE LIST
No Front Guard No ChargeFront Guard - Wire Mesh Screen $1,326.00Front Stone Guard (OPG L1)vertical bars (two piece/upper and lower)
$1,973.00
Front Stone Guard (OPG L2)vertical bars (one piece/full length)
$2,324.00
Vandal GuardRemovable steel panels for front windshield
$574.00
No Rain Deflector No ChargeRain DeflectorNot for use with Front grill guard - 2 x 2 mesh option 461142, Front rock guard (OPG 1) option 781986, orFront rock guard (OPG 2) option 461024.
$380.00
No Sun Visor No ChargeSun Visor $108.00
ADDITIONAL OPTIONS
Single Track Chain Guide No ChargeTriple Track Chain Guide $2,115.00
No Quick Coupler No ChargeHydraulic Quick Coupler Ready $2,304.00
No Hose Burst Check ValveLocated on Boom and Arm Cylinder
No Charge
Hose Burst Check Valve (HBCV)(BOOM/ARM) WARNING DEVICE
$8,667.00
No max view monitor No ChargeCase Max View Monitor $1,700.00
26 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
Factory Supplied Attachments
Case Coupler Buckets
Case Pin-On Buckets
Direct Link Thumb
Coupler
CX245D LC AND CX245D LC DZ US PRICE LIST
Order Code Description Weight Factory Data List Price
84404187 24" Heavy-Duty Coupler Bucket with 4 teeth (.63 cu. yd.) $5,418.00
84404188 30" Heavy-Duty Coupler Bucket with 4 teeth (.82 cu. yd.) $5,958.00
84404189 36" Heavy-Duty Coupler Bucket with 5 teeth (1.02 cu. yd.) $6,556.00
84404190 42" Heavy-Duty Coupler Bucket with 5 teeth (1.20 cu. yd.) $7,213.00
84404191 48" Heavy-Duty Coupler Bucket with 6 teeth (1.48 cu. yd.) $7,622.00
84404166 24" Heavy-Duty Pin-On Bucket with 4 teeth (.50 cu. yd.) $3,997.00
84404167 30" Heavy-Duty Pin-On Bucket with 4 teeth (.84 cu. yd.) $4,475.00
84404168 36" Heavy-Duty Pin-On Bucket with 5 teeth (1.03 cu. yd.) $4,884.00
84404169 42" Heavy-Duty Pin-On Bucket with 5 teeth (1.22 cu. yd.) $5,265.00
84404170 24" HD Hi-Capacity Pin-On Bucket with 4 teeth (.79 cu. yd.) $4,322.00
84404175 30" HD Hi-Capacity Pin-On Bucket with 4 teeth (1.02 cu. yd.) $4,775.00
84404179 42" HD Hi-Capacity Pin-On Bucket with 5 teeth (1.48 cu. yd.) $5,542.00
84404180 48" HD Hi-Capacity Pin-On Bucket with 6 teeth (1.72 cu. yd.) 2,650 LB $6,056.00
84404181 24" Severe-Duty Pin-On Bucket with 4 teeth (.65 cu. yd.) $5,404.00
84404182 30" Severe-Duty Pin-On Bucket with 4 teeth (.84 cu. yd.) $6,054.00
84404183 36" Severe-Duty Pin-On Bucket with 5 teeth (1.03 cu. yd.) $6,780.00
84404184 42" Severe-Duty Pin-On Bucket with 5 teeth (1.22 cu. yd.) $7,015.00
84404185 60" Ditching Pin-On Bucket (1.02 cu yd.) $3,620.0084404186 72" Ditching Pin-On Bucket(1.22 cu. yd.) $3,921.00
47609071 KIT, THUMB, HYD, 3-TINE,use with bucket only (3 tine)
1,155 LB $8,604.00
47609072 KIT, THUMB, HYD, 4-TINE,use with bucket only (4 tine)
1,190 LB $9,089.00
47609073 KIT, THUMB, HYD, 3-TINE,use with bucket and coupler (3 tine)
1,300 LB $8,972.00
47609074 KIT, THUMB, HYD, 4-TINE,use with bucket and coupler (4 tine)
1,325 LB $9,573.00
47855901 KIT, COUPLER, MULTI-FIT S 683 LB $5,882.00
27 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
Weight56,909 LBS
SD_E5408 WORKING LIGHTS488134488135
SD_E5311 BOOM481858
781917
SD_E5320 ARM/DIPPERSTICK461548
781178
781149
XE5320X
SD_E5199 TRACK SHOES9560013
9560003
9560005
9560007
SD_47083 OPERATOR'S MANUAL781981461540781980
CX250D STD CRAWLER EXCAVATOR US PRICE LIST
COMMERCIAL MODEL Factory Data List PriceCX250D STD $335,348.00
CX250D STD CRAWLER EXCAVATOR US PRICE LIST
Order Code Description Weight Factory Data List PriceLIGHTS
Halogen Working Lights No ChargeLED Working Lights8 LED light and 1 side camera:2 LED light are mounted on the front (1 on boom, 1 on house) 2 LED lights are mounted on the rear(above the rear view camera)1 LED light mounted on each side (2)2 LED lights mounted on the top of the cab
$2,754.00
BOOMS
Std Boom19'2" (5.85 M) Standard Boom
No Charge
No BoomLess boom, hoist and arm cylinders and plumbing. Boom-foot and cylinder pins are provided.
($6,769.00)
ARMS
8'2" (2.50 m) HD ArmFor use with 19"2" Standard Boom (option 481858) (Recommended for heavy-duty applications - example: hammer)
$217.00
9'10" (3.01 m) Std ArmFor use with 19'2" Standard Boom (option 481858)
No Charge
11'6" (3.52 M) Standard ArmFor use with 19'2" Standard Boom (option 481858)
$1,300.00
No Arm/DipperstickLess arm, bucket cylinder and linkage.
($3,467.00)
TRACK SHOES
23.6" (600 mm) Steel ShoesTriple-Grouser Steel Shoes
($1,153.00)
27.6" (700mm) TG Steel ShoesTriple-Grouser Steel Shoes
($568.00)
31.5" (800 mm) TG Steel ShoesTriple-Grouser Steel Shoes
No Charge
35.4" (900 mm) Steel Shoes $1,377.00LANGUAGE
English Literature No ChargeFrench Canadian Literature No ChargeSpanish Literature No Charge
28 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
SD_E6410 AUXILIARY HYDRAULICSXE6410X461865
461871
461869
SD_E6417 SECONDARY AUXILIARY HYDRAULICSXE6417X
(Ex Works Port of Entry)461863
SD_E5443 CAB GUARD (FOPS)XE5443X481070
No Charge
CX250D STD CRAWLER EXCAVATOR US PRICE LIST
Single Acting Auxiliary HydSingle Acting Auxiliary HydraulicsFor use with hammers or vibratory compaction plate applicationsJoystick activated with Electronic Proportional Controls Provides single direction flowIncludes manually adjustable relief valve to set required pressuresNotes:1) Not for use with other Auxiliary Hydraulic options, with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.
$8,710.00
Thumb - Proportional SWDouble Acting Auxiliary Hydraulics For use with thumb applicationsJoystick Activated with Electronic Proportional Controls Provides single pump, two-way flowHydraulic plumbing provided to the end of the boom only, no piping to the armThis system is not switchable to single acting flowNotes:1) Not for use other Auxiliary Hydraulics options with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.
$6,838.00
MF w/ pressure setting - PropMulti-Function Auxiliary Hydraulics with Electronic Pressure Control (EPC)For use with multiple applications: hammers/thumbs/grapples/crushers.Includes in-cab Electronic Pressure Control feature Pressure Control feature allows hydraulic pressure setting from the cab monitor and maintaining pressure settings in memory when multiple tools are used.Joystick Activated with Electronic Proportional ControlsProvides single or dual pump, two-way flow, Secondary Low-flow Auxiliary Hydraulics can be addedIncludes in-cab electronically controlled pressure setting feature Is switchable to single acting flow for hammer application.Notes:1) Not for use with other Auxiliary Hydraulics options, with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.
$11,536.00
No Low Flow Circuit No Charge
ADDITIONAL EQUIPMENT CXCHYDRAULIC OPTIONS
No Optional Hydraulics
Secondary Auxiliary HydraulicsSecondary Low Flow Auxiliary HydraulicsProvides low-flow for rotation or tilt hydraulic attachments.For use with Standard Boom option 481858 Not for use with Offset Boom option 461025Joystick Activated with Electronic Proportional ControlsNotes:1) May be used stand alone or with any Case Excavator Auxiliary Hydraulics option.
$7,171.00
CAB OPTIONS
No FOPS Top Cab Guard No ChargeFOPS Top Cab Guard $1,146.00
29 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
SD_E5444 CAB GUARD (FRONT)XE5444X461142781986
461024
461552
SD_E5449 RAIN DEFLECTORXE5449X461555
SD_E5451 SUN VISORXE5451X461554
SD_E6300 EXCAVATOR BUCKET(S)XE6300X
SD_02005 ENGINE PRE-CLEANERX02005X488031
SD_E5206 TRACK CHAIN GUIDE461541461143
SD_E5407 COOLING PACKAGEXE5407X481027
SD_E6400 MEC/HYD QUICK COUPLERXE6400X781128
SD_E9730 SAFETY VALVEXE9730X481064
SD_E9739 FULL VIEW CAMERAXE9739X488055
SD_E9742 REVERSIBLE FANXE9742X488121
SD_E9874 REFUEL PUMPXE9874X481257
CX250D STD CRAWLER EXCAVATOR US PRICE LIST
No Front Guard No ChargeFront Guard - Wire Mesh Screen $1,326.00Front Stone Guard (OPG L1)vertical bars (two piece/upper and lower)
$1,973.00
Front Stone Guard (OPG L2)vertical bars (one piece/full length)
$2,324.00
Vandal GuardRemovable steel panels for front windshield
$574.00
No Rain Deflector No ChargeRain DeflectorNot for use with Front grill guard - 2 x 2 mesh option 461142, Front rock guard (OPG 1) option 781986, orFront rock guard (OPG 2) option 461024.
$380.00
No Sun Visor No ChargeSun Visor $108.00
BUCKETS
No BucketBuckets may be ordered using Order Codes listed in the Factory Supplied Attachments Section
No Charge
ADDITIONAL OPTIONS
No Pre-Cleaner No ChargePre-Cleaner Cyclone $470.00
Single Track Chain Guide No ChargeTriple Track Chain Guide $1,123.00
Standard Cooling Package No ChargeTropical Cooling PackageHigh ambient temperature cooling package Includes hardware to support the cooling of the main machine systems.Must also order: Pre-Cleaner Cyclone option 488031 Note: Recommended for machines operating in high heatconditions not to exceed 122°F (50°C)
$504.00
No Quick Coupler No ChargeHydraulic Quick Coupler ReadyDoes not come with coupler. Must order coupler from Factory Supplied Attachments section
$2,304.00
No Hose Burst Check Valve No ChargeHose Burst Check Valve (HBCV)Located on Boom and Arm Cylinder
$7,913.00
No max view monitor No ChargeCase Max View Monitor $1,700.00
No Reversible Fan No ChargeReversible FanVariable pitch reversing fan features rotating blades, that provides maximum airflow in either direction when engaged by operator.
$8,709.00
No Refuel Pump No ChargeRefuel Pump $1,296.00
30 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
Factory Supplied Attachments
Case Pin On Buckets
Case Coupler Buckets
Coupler
Direct Link Thumb
Progressive Link Thumb
CX250D STD CRAWLER EXCAVATOR US PRICE LIST
Order Code Description Weight Factory Data List Price
84404217 36" Heavy-Duty Pin-On Bucket with 5 teeth (1.25 cu. yd.) $5,659.00
84404219 42" Heavy-Duty Pin-On Bucket with 5 teeth (1.48 cu. yd.) $6,226.00
84404220 48" Heavy-Duty Pin-On Bucket with 6 teeth (1.72 cu. yd.) $6,510.00
84404224 36" HD Hi-Capacity Pin-On Bucket with 5 teeth (1.36 cu. yd.) $6,103.00
84404228 42" HD Hi-Capacity Pin-On Bucket with 5 teeth (1.62 cu. yd.) $6,713.00
84404230 48" Extra Heavy Duty Bucket with 6 teeth (1.88 cu. yd.) $7,103.00
84404232 54" HD Hi-Capacity Pin-On Bucket with 6 teeth (2.14 cu. yd.) $7,438.00
84404234 36" Severe-Duty Pin-On Bucket with 5 teeth (1.25 cu. yd.) $7,291.00
84404237 42" Severe-Duty Pin-On Bucket with 5 teeth (1.48 cu. yd.) $8,022.00
84404240 48" Severe-Duty Pin-On Bucket with 6 teeth (1.72 cu. yd.) $8,824.00
84404242 60" Ditching Pin-On Bucket (1.38 cu yd.) $5,059.0084404244 72" Ditching Pin-On Bucket(1.77 cu. yd.) $5,398.00
84404245 36" Heavy-Duty Coupler Bucket with 5 teeth (1.16 cu. yd.) $7,114.00
84404246 42" Heavy-Duty Coupler Bucket with 5 teeth (1.38 cu. yd.) $7,589.00
84404249 48" Heavy-Duty Coupler Bucket with 6 teeth (1.60 cu. yd.) $8,315.00
84404251 54" Heavy-Duty Coupler Bucket with 6 teeth (1.84 cu. yd.) $8,999.00
47848464 Multi-Fit S Coupler Kit 1,265 LB $8,414.00
$12,795.00
47609075 KIT, THUMB, HYD, 3-TINE,use with bucket only (3 tine)
1,235 LB $9,136.00
47609076 KIT, THUMB, HYD, 4-TINE,use with bucket only (4 tine)
1,275 LB $9,621.00
47609077 KIT, THUMB, HYD, 3-TINE,use with bucket and coupler (3 tine)
1,380 LB $9,539.00
47609078 KIT, THUMB, HYD, 4-TINE,use with bucket and coupler (4 tine)
1,415 LB $10,155.00
47609115 KIT, THUMB, PROG LINK, 3-use with bucket only (3 tine)
1,760 LB $11,776.00
47609116 KIT, THUMB, PROG LINK, 4-use with bucket only (4 tine)
1,800 LB $12,261.00
47609117 KIT, THUMB, PROG LINK, 3-use with bucket and coupler (3 tine)
1,905 LB $12,179.00
47609118 KIT, THUMB, PROG LINK, 4-use with bucket and coupler (4 tine)
1,940 LB
31 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
Weight62,100 LBS
SD_E5408 WORKING LIGHTS488134488135
SD_E5311 BOOM461029
SD_E5320 ARM/DIPPERSTICK481238
SD_E5199 TRACK SHOES9560005
SD_47083 OPERATOR'S MANUAL781981461540781980
SD_E6417 SECONDARY AUXILIARY HYDRAULICSXE6417X461863
SD_E5443 CAB GUARD (FOPS)XE5443X481070
SD_E5444 CAB GUARD (FRONT)XE5444X461142781986
461024
461552
CX250D LONG REACH CRAWLER EXCAVATOR US PRICE LIST
COMMERCIAL MODEL Factory Data List PriceCX250D LR $393,068.00
CX250D LONG REACH CRAWLER EXCAVATOR US PRICE LIST
Order Code Description Weight Factory Data List PriceLIGHTS
Halogen Working Lights No ChargeLED Working Lights8 LED light and 1 side camera:2 LED light are mounted on the front (1 on boom, 1 on house) 2 LED lights are mounted on the rear(above the rear view camera)1 LED light mounted on each side (2)2 LED lights mounted on the top of the cab
$2,754.00
BOOMS
Standard Long Reach Boom33'10" (10.30 M) Long Reach Boom
No Charge
ARMS
26'3" (8.00 M) ArmFor use with 33'10" Standard Long Reach Boom (option 461029)
No Charge
TRACK SHOES
31.5" (800 mm) TG Steel ShoesTriple-Grouser Steel Shoes
No Charge
LANGUAGE
English Literature No ChargeFrench Canadian Literature No ChargeSpanish Literature No Charge
ADDITIONAL EQUIPMENT CXCHYDRAULIC OPTIONS
No Low Flow Circuit No ChargeSecondary Auxiliary HydraulicsSecondary Low Flow Auxiliary HydraulicsProvides low-flow for rotation or tilt hydraulic attachments. Joystick Activated with Electronic Proportional ControlsNotes:1) May be used stand alone or with any Case Excavator Auxiliary Hydraulics option.
$8,083.00
CAB OPTIONS
No FOPS Top Cab Guard No ChargeFOPS Top Cab Guard $1,146.00
No Front Guard No ChargeFront Guard - Wire Mesh Screen $1,326.00Front Stone Guard (OPG L1)vertical bars (two piece/upper and lower)
$1,973.00
Front Stone Guard (OPG L2)vertical bars (one piece/full length)
$2,324.00
Vandal GuardRemovable steel panels for front windshield
$574.00
32 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
SD_E5449 RAIN DEFLECTORXE5449X461555
SD_E5451 SUN VISORXE5451X461554
SD_E6300 EXCAVATOR BUCKET(S)XE6300X
SD_02005 ENGINE PRE-CLEANERX02005X488031
SD_E5206 TRACK CHAIN GUIDE461541461143
SD_E5407 COOLING PACKAGEXE5407X481027
SD_E9730 SAFETY VALVEXE9730X
481064
SD_E9739 FULL VIEW CAMERAXE9739X488055
SD_E9874 REFUEL PUMPXE9874X481257
Factory Supplied Attachments
Case Pin On Buckets
Direct Link Thumb
Fabco Buckets
No Rain Deflector No ChargeRain DeflectorNot for use with Front grill guard - 2 x 2 mesh option 461142, Front rock guard (OPG 1) option 781986, orFront rock guard (OPG 2) option 461024.
$380.00
No Sun Visor No ChargeSun Visor $108.00
CX250D LONG REACH CRAWLER EXCAVATOR US PRICE LIST
BUCKETS
No BucketBuckets may be ordered using Order Codes listed in the Factory Supplied Attachments Section
No Charge
ADDITIONAL OPTIONS
No Pre-Cleaner No ChargePre-Cleaner Cyclone $470.00
Single Track Chain Guide No ChargeTriple Track Chain Guide $1,123.00
Standard Cooling Package No ChargeTropical Cooling PackageHigh ambient temperature cooling package Includes Pre-Cleaner Cyclone option 488031Note: Recommended for machines operating in high heatconditions not to exceed 122°F (50°C)
$504.00
No Hose Burst Check ValveLocated on Boom and Arm Cylinder
No Charge
Hose Burst Check Valve (HBCV)boom and arm
$7,913.00
No max view monitor No ChargeCase Max View Monitor $1,700.00
No Refuel Pump No ChargeRefuel Pump $1,296.00
CX250D LONG REACH CRAWLER EXCAVATOR US PRICE LIST
870 LB $6,813.00
Order Code Description Weight Factory Data List Price
84404095 30" Heavy-Duty Pin-On Bucket with 4 teeth (.65 cu. yd.) $3,073.00
84404103 36" Heavy-Duty Pin-On Bucket with 5 teeth (.79 cu. yd.) 1,301 LB $3,329.00
84404113 48" Ditching Pin-On Bucket (.79 cu. yd.) $2,992.00
47609061 KIT, THUMB, HYD, 4-TINE,use with bucket and coupler (3 tine)
910 LB $7,293.00
84404117 24" Heavy Duty (HD) Coupler Bucket with 4 teeth (.43 cu. yd.) $4,075.00
84404118 30" Heavy Duty (HD) Coupler Bucket with 4 teeth (.56 cu. yd.) $4,523.00
84404115 60" Ditching Pin-On Bucket (1.02 cu yd.) $3,394.00
47609058 Hydraulic Main Pin Direct Link Thumb use with bucket only (2 tine) 830 LB $6,569.00
47609059 KIT, THUMB, HYD, 4-TINE,use with bucket only (3 tine)
860 LB $6,953.00
47609060 KIT, THUMB, HYD, 3-TINE,use with bucket and coupler (2 tine)
33 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
Weight72,100 LB
SD_E5408 WORKING LIGHTS488134488135
SD_E5311 BOOM461031
SD_E5320 ARM/DIPPERSTICK781930
SD_E5199 TRACK SHOES9560025956000395600139560005
SD_47083 OPERATOR'S MANUAL461540781980781981
SD_E5443 CAB GUARD (FOPS)XE5443X481070
SD_E5444 CAB GUARD (FRONT)461552
781986461024
SD_02005 ENGINE PRE-CLEANERX02005X488031
SD_E5206 TRACK CHAIN GUIDE461541461143
SD_E5449 RAIN DEFLECTORXE5449X461555
SD_E9739 FULL VIEW CAMERAXE9739X488055
SD_E9742 REVERSIBLE FANXE9742X488121
SD_E9908 TELEMATICS ON BOARD461860
SD_E9909 TELEMATICS SERVICE461742
CX290D LC MATERIAL HANDLING US PRICE LIST
COMMERCIAL MODEL Factory Data List PriceCX290D LC MH $495,947.00
CX290D LC MATERIAL HANDLING US PRICE LIST
Order Code Description Weight Factory Data List PriceLIGHTS
Halogen Working Lights No ChargeLED Working Lights8 LED light and 1 side camera:2 LED light are mounted on the front (1 on boom, 1 on house) 2 LED lights are mounted on the rear(above the rear view camera)1 LED light mounted on each side (2)2 LED lights mounted on the top of the cab
$2,754.00
BOOMS
MATERIAL HANDLING B No ChargeARMS
16'5" (5.0 M) Arm No ChargeTRACK SHOES
23.6" (600mm) Flat Steel Shoes No Charge27.6" (700mm) TG Steel Shoes ($11,022.00)23.6" (600 mm) Steel Shoes ($11,749.00)31.5" (800 mm) TG Steel Shoes ($10,308.00)
LANGUAGE
French Canadian Literature No ChargeSpanish Literature No ChargeEnglish Literature No Charge
ADDITIONAL EQUIPMENT CXC
No FOPS Top Cab Guard No ChargeFOPS Top Cab GuardNot for use with Vandal Guard option 461552
$1,089.00
Vandal GuardRemovable steel panels for front windshield
($1,399.00)
Front Stone Guard (OPG L1) No ChargeFront Stone Guard (OPG L2) $351.00
ADDITIONAL OPTIONS
No Pre-Cleaner No ChargePre-Cleaner Cyclone $470.00
Single Track Chain Guide No ChargeTriple Track Chain Guide $1,123.00
No Rain Deflector No ChargeRain DeflectorNot for use with Front Stone Guard option listed in the Cab Guard Section
$380.00
CASE SiteWatch Telematics No Charge
3 YEARS ADV SUB No Charge
No max view monitor No ChargeCase Max View Monitor $1,700.00
No Reversible Fan No ChargeReversible FanVariable pitch reversing fan features rotating blades, that provides maximum airflow in either direction when engaged by operator.
$8,709.00
TELEMATICS
34 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
Weight71,700 LB
SD_E5408 WORKING LIGHTS488134488135
SD_E5311 BOOM461032
SD_E5320 ARM/DIPPERSTICK461033
SD_E5199 TRACK SHOES9560025956000395600139560005
SD_47083 OPERATOR'S MANUAL461540781980781981
SD_E5443 CAB GUARD (FOPS)XE5443X481070
SD_E5444 CAB GUARD (FRONT)461552
781986461024
SD_02005 ENGINE PRE-CLEANERX02005X488031
SD_E5206 TRACK CHAIN GUIDE461541461143
SD_E5449 RAIN DEFLECTORXE5449X461555
SD_E9739 FULL VIEW CAMERAXE9739X488055
SD_E9742 REVERSIBLE FANXE9742X488121
SD_E9908 TELEMATICS ON BOARD461860
SD_E9909 TELEMATICS SERVICE461742
CX290D LC SCRAP US PRICE LIST
COMMERCIAL MODEL Factory Data List PriceCX290D LC SC $493,587.00
CX290D LC SCRAP US PRICE LIST
Order Code Description Weight Factory Data List PriceLIGHTS
Halogen Working Lights No ChargeLED Working Lights8 LED light and 1 side camera:2 LED light are mounted on the front (1 on boom, 1 on house) 2 LED lights are mounted on the rear(above the rear view camera)1 LED light mounted on each side (2)2 LED lights mounted on the top of the cab
$2,754.00
BOOMS
MATERIAL HANDLING S No ChargeARMS
GOOSE NECK ARM No ChargeTRACK SHOES
23.6" (600mm) Flat Steel Shoes No Charge27.6" (700mm) TG Steel Shoes ($11,022.00)23.6" (600 mm) Steel Shoes ($11,749.00)31.5" (800 mm) TG Steel Shoes ($10,308.00)
LANGUAGE
French Canadian Literature No ChargeSpanish Literature No ChargeEnglish Literature No Charge
ADDITIONAL EQUIPMENT CXC
No FOPS Top Cab Guard No ChargeFOPS Top Cab GuardNot for use with Vandal Guard option 461552
$1,089.00
Vandal GuardRemovable steel panels for front windshield
($1,399.00)
Front Stone Guard (OPG L1) No ChargeFront Stone Guard (OPG L2) $351.00
ADDITIONAL OPTIONS
No Pre-Cleaner No ChargePre-Cleaner Cyclone $470.00
Single Track Chain Guide No ChargeTriple Track Chain Guide $1,123.00
No Rain Deflector No ChargeRain DeflectorNot for use with Front Stone Guard option listed in the Cab Guard Section
$380.00
No max view monitor No ChargeCase Max View Monitor $1,700.00
No Reversible Fan No ChargeReversible FanVariable pitch reversing fan features rotating blades, that provides maximum airflow in either direction when engaged by operator.
$8,709.00
TELEMATICS
CASE SiteWatch Telematics No Charge
3 YEARS ADV SUB No Charge
35 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
Weight67,271 LBS
SD_E5408 WORKING LIGHTS488134488135
SD_E5311 BOOM481858
781917
SD_E5320 ARM/DIPPERSTICK481243
781180
481850
XE5320X
SD_E5199 TRACK SHOES9560013
9560003
9560005
SD_47083 OPERATOR'S MANUAL781981461540781980
SD_E6410 AUXILIARY HYDRAULICSXE6410X461865
CX300D CRAWLER EXCAVATOR US PRICE LIST
COMMERCIAL MODEL Factory Data List PriceCX300D STD $393,361.00
CX300D CRAWLER EXCAVATOR US PRICE LIST
Order Code Description Weight Factory Data List PriceLIGHTS
Halogen Working Lights No ChargeLED Working Lights8 LED light and 1 side camera:2 LED light are mounted on the front (1 on boom, 1 on house) 2 LED lights are mounted on the rear(above the rear view camera)1 LED light mounted on each side (2)2 LED lights mounted on the top of the cab
$2,754.00
BOOMS
Std Boom20'2" (6.15 M) Standard Boom
No Charge
No BoomLess boom, hoist and arm cylinders and plumbing. Boom-foot and cylinder pins are provided.
($7,367.00)
ARMS
8'8" (2.65 M) Standard ArmFor use with 20'2" Standard Boom (option 481858)
($433.00)
10'5" (3.18 M) Standard ArmFor use with 20'2" Standard Boom (option 481858)
No Charge
12' (3.66 M) Standard ArmFor use with 20'2" Standard Boom (option 481858)
$1,127.00
No Arm/DipperstickLess arm, bucket cylinder and linkage
($3,909.00)
TRACK SHOES
23.6" (600 mm) Steel ShoesTriple-Grouser Steel Shoes
($871.00)
27.6" (700mm) TG Steel ShoesTriple-Grouser Steel Shoes
($672.00)
31.5" (800 mm) TG Steel ShoesTriple-Grouser Steel Shoes
No Charge
LANGUAGE
English Literature No ChargeFrench Canadian Literature No ChargeSpanish Literature No Charge
ADDITIONAL EQUIPMENT CXCHYDRAULIC OPTIONS
No Optional Hydraulics No ChargeSingle Acting Auxiliary HydSingle Acting Auxiliary HydraulicsFor use with hammers or vibratory compaction plate applicationsJoystick activated with Electronic Proportional Controls Provides single direction flowIncludes manually adjustable relief valve to set required pressuresNotes:1) Not for use with other Auxiliary Hydraulic options, with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.
$9,379.00
36 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
461871
461869
SD_E6417 SECONDARY AUXILIARY HYDRAULICSXE6417X461863
SD_E5443 CAB GUARD (FOPS)XE5443X481070
CX300D CRAWLER EXCAVATOR US PRICE LIST
Thumb - Proportional SWDouble Acting Auxiliary Hydraulics For use with thumb applicationsJoystick Activated with Electronic Proportional Controls Provides single pump, two-way flowHydraulic plumbing provided to the end of the boom only, no piping to the armThis system is not switchable to single acting flowNotes:1) Not for use other Auxiliary Hydraulics options with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.
$6,996.00
MF w/ pressure setting - PropMulti-Function Auxiliary Hydraulics with Electronic Pressure Control (EPC)For use with multiple applications: hammers/thumbs/grapples/crushers.Includes in-cab Electronic Pressure Control featurePressure Control feature allows hydraulic pressure setting from the cab monitor and maintaining pressure settings in memory when multiple tools are used.Joystick Activated with Electronic Proportional ControlsProvides single or dual pump, two-way flow, Secondary Low-flow Auxiliary Hydraulics can be addedIncludes in-cab electronically controlled pressure setting feature Is switchable to single acting flow for hammer application.Notes:1) Not for use with other Auxiliary Hydraulics options, with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.
$11,934.00
No Low Flow Circuit No ChargeSecondary Auxiliary HydraulicsSecondary Low Flow Auxiliary HydraulicsProvides low-flow for rotation or tilt hydraulic attachments.For use with Standard Boom option 481858 Not for use with Offset Boom option 461025Joystick Activated with Electronic Proportional ControlsNotes:1) May be used stand alone or with any Case Excavator Auxiliary Hydraulics option.
$7,647.00
CAB OPTIONS
No FOPS Top Cab Guard No ChargeFOPS Top Cab Guard $1,146.00
37 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
SD_E5444 CAB GUARD (FRONT)XE5444X461142781986
461024
461552
SD_E5449 RAIN DEFLECTORXE5449X461555
SD_E5451 SUN VISORXE5451X461554
SD_E6300 EXCAVATOR BUCKET(S)XE6300X
SD_02005 ENGINE PRE-CLEANERX02005X488031
SD_E5206 TRACK CHAIN GUIDE461541461143
SD_E6400 MEC/HYD QUICK COUPLERXE6400X781128
SD_E9730 SAFETY VALVEXE9730X481064
SD_E9739 FULL VIEW CAMERAXE9739X488055
SD_E9742 REVERSIBLE FANXE9742X488121
SD_E9874 REFUEL PUMPXE9874X481257
No ChargeRain DeflectorNot for use with Front grill guard - 2 x 2 mesh option 461142, Front rock guard (OPG 1) option 781986, orFront rock guard (OPG 2) option 461024.
$380.00
No Front Guard No ChargeFront Guard - Wire Mesh Screen $1,326.00
No Sun Visor No ChargeSun Visor $108.00
CX300D CRAWLER EXCAVATOR US PRICE LIST
BUCKETS
No BucketBuckets may be ordered using Order Codes listed in the Factory Supplied Attachments Section
No Charge
ADDITIONAL OPTIONS
No Pre-Cleaner No Charge
Front Stone Guard (OPG L1)vertical bars (two piece/upper and lower)
$1,973.00
Front Stone Guard (OPG L2)vertical bars (one piece/full length)
$2,324.00
Vandal GuardRemovable steel panels for front windshield
$574.00
No Rain Deflector
Pre-Cleaner Cyclone $972.00
Single Track Chain Guide No ChargeTriple Track Chain Guide $1,996.00
No Quick Coupler No ChargeHydraulic Quick Coupler ReadyDoes not come with coupler. Must order coupler from Factory Supplied Attachments section
$2,764.00
No Hose Burst Check Valve No ChargeHose Burst Check Valve (HBCV)Located on Boom and Arm Cylinder
$9,165.00
No max view monitor No ChargeCase Max View Monitor $1,700.00
No Reversible Fan No ChargeReversible FanVariable pitch reversing fan features rotating blades, that provides maximum airflow in either direction when engaged by operator.
$8,709.00
No Refuel Pump No ChargeRefuel Pump $1,296.00
38 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
Factory Supplied Attachments
Case Pin On Buckets
Case Coupler Buckets
Coupler
Direct Link Thumb
Progressive Link Thumb
CX300D CRAWLER EXCAVATOR US PRICE LIST
Order Code Description Weight Factory Data List Price
84404254 36" Heavy-Duty Pin-On Bucket with 5 teeth (1.36 cu. yd.) $6,357.00
84404255 42" Heavy-Duty Pin-On Bucket with 5 teeth (1.62 cu. yd.) $6,824.00
84404256 48" Heavy-Duty Pin-On Bucket with 6 teeth (1.88 cu. yd.) $7,506.00
84404257 36" HD Hi-Capacity Pin-On Bucket with 5 teeth (1.71 cu. yd.) $7,208.00
84404258 42" HD Hi-Capacity Pin-On Bucket with 5 teeth (2.03 cu. yd.) $7,642.00
84404259 48" HD Hi-Capacity Pin-On Bucket with 6 teeth (2.36 cu. yd.) $8,405.00
84404260 54" HD Hi-Capacity Pin-On Bucket with 6 teeth (2.69 cu. yd.) 3,649 LB $9,246.00
84404261 36" Severe-Duty Pin-On Bucket with 5 teeth (1.36 cu. yd.) $7,445.00
84404262 42" Severe-Duty Pin-On Bucket with 5 teeth (1.62 cu. yd.) $7,998.00
84404265 48" Severe-Duty Pin-On Bucket with 6 teeth (1.88 cu. yd.) $8,798.00
84404266 60" Ditching Pin-On Bucket (1.71 cu yd.) $5,693.0084404267 72" Ditching Pin-On Bucket (2.09 cu yd.) $6,068.00
84404268 36" Heavy-Duty Coupler Bucket with 5 teeth (1.26 cu. yd.) $7,615.00
84404269 42" Heavy-Duty Coupler Bucket with 5 teeth (1.52 cu. yd.) $8,375.00
84404270 48" Heavy-Duty Coupler Bucket with 6 teeth (1.78 cu. yd.) $9,213.00
84404272 54" Heavy-Duty Coupler Bucket with 6 teeth (2.03 cu. yd.) $10,133.00
47848465 Multi-Fit S Hyd.Pin Grabber Coupler Kit 1,009 LB $8,414.00
47609082 KIT, THUMB, HYD, 3-TINE,use with bucket only (3 tine)
1,235 LB $10,896.00
47609084 KIT, THUMB, HYD, 4-TINE,use with bucket only (4 tine)
1,275 LB $11,540.00
47609085 KIT, THUMB, HYD, 3-TINE,use with bucket and coupler (3 tine)
1,380 LB $11,199.00
47609086 KIT, THUMB, HYD, 4-TINE,use with bucket and coupler (4 tine)
1,415 LB $11,740.00
47609119 KIT, THUMB, PROG LINK, 3-use with bucket only (3 tine)
1,760 LB $13,136.00
47609120 KIT, THUMB, PROG LINK, 4-use with bucket only (4 tine)
1,800 LB $13,380.00
47609121 KIT, THUMB, PROG LINK, 3-use with bucket and coupler (3 tine)
1,905 LB $13,439.00
47609122 Progressive Link Thumb Kit with Coupler use with bucket and coupler (4 tine)
1,940 LB $13,899.00
39 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
Weight82,483 LBS
SD_E5408 WORKING LIGHTS488134488135
SD_E5311 BOOM481858
461543
781917
SD_E5320 ARM/DIPPERSTICK481245
781184
461546
461545
XE5320X
SD_E5199 TRACK SHOES9560003
9560005
9560006
9560049
SD_47083 OPERATOR'S MANUAL781981461540781980
CX350D CRAWLER EXCAVATOR US PRICE LIST
COMMERCIAL MODEL Factory Data List PriceCX350D STD $437,242.00
CX350D CRAWLER EXCAVATOR US PRICE LIST
Order Code Description Weight Factory Data List PriceLIGHTS
Halogen Working Lights No ChargeLED Working Lights8 LED light and 1 side camera:2 LED light are mounted on the front (1 on boom, 1 on house) 2 LED lights are mounted on the rear(above the rear view camera)1 LED light mounted on each side (2)2 LED lights mounted on the top of the cab
$2,754.00
BOOMS
Std Boom21'2" (6.45 M) Standard Boom
No Charge
Heavy-Duty Boom21'2" (6.45 M)
$2,639.00
No BoomLess boom, hoist and arm cylinders and plumbing. Boom-foot and cylinder pins are provided.
($7,800.00)
ARMS
10' 8" (3.25 m) Std ArmFor use with 21'2" Standard Boom (option 481858)
No Charge
13'3" (4.03 m) Std ArmFor use with 21'2" Standard Boom (option 481858)
$2,769.00
8'8" (2.63 m) HD ArmFor use with Heavy-Duty Boom option 461543
$139.00
10'8" (3.25 m) HD ArmFor use with Heavy-Duty Boom option 461543
$2,279.00
No Arm/DipperstickLess arm, bucket cylinder and linkage.
($5,200.00)
TRACK SHOES
27.6" (700mm) TG Steel ShoesTriple-Grouser Steel Shoes
($780.00)
31.5" (800 mm) TG Steel ShoesTriple-Grouser Steel Shoes
No Charge
33.5" (850 mm) TG Steel ShoesTriple-Grouser Steel Shoes
$680.00
27.6" (700 mm) SG Steel ShoesSingle-Grouser Steel Shoes
$4,993.00
LANGUAGE
English Literature No ChargeFrench Canadian Literature No ChargeSpanish Literature No Charge
40 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
SD_E6410 AUXILIARY HYDRAULICSXE6410X461865
461871
461869
SD_E6417 SECONDARY AUXILIARY HYDRAULICSXE6417X461863
SD_E5443 CAB GUARD (FOPS)XE5443X481070
SD_E5444 CAB GUARD (FRONT)XE5444X461142781986
461024
461552
ADDITIONAL EQUIPMENT CXCHYDRAULIC OPTIONS
No Optional Hydraulics No ChargeSingle Acting Auxiliary HydSingle Acting Auxiliary HydraulicsFor use with hammers or vibratory compaction plate applicationsJoystick activated with Electronic Proportional Controls Provides single direction flowIncludes manually adjustable relief valve to set required pressuresNotes:1) Not for use with other Auxiliary Hydraulic options, with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.
$9,440.00
CX350D CRAWLER EXCAVATOR US PRICE LIST
Thumb - Proportional SWDouble Acting Auxiliary Hydraulics For use with thumb applicationsJoystick Activated with Electronic Proportional Controls Provides single pump, two-way flowHydraulic plumbing provided to the end of the boom only, no piping to the armThis system is not switchable to single acting flowNotes:1) Not for use other Auxiliary Hydraulics options with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.
$7,217.00
MF w/ pressure setting - PropMulti-Function Auxiliary Hydraulics with Electronic Pressure Control (EPC)For use with multiple applications: hammers/thumbs/grapples/crushers.Includes in-cab Electronic Pressure Control feature Pressure Control feature allows hydraulic pressure setting from the cab monitor and maintaining pressure settings in memory when multiple tools are used.Joystick Activated with Electronic Proportional ControlsProvides single or dual pump, two-way flow, Secondary Low-flow Auxiliary Hydraulics can be addedIncludes in-cab electronically controlled pressure setting feature Is switchable to single acting flow for hammer application.Notes:1) Not for use with other Auxiliary Hydraulics options, with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.
$12,571.00
No Low Flow Circuit No ChargeSecondary Auxiliary HydraulicsSecondary Low Flow Auxiliary HydraulicsProvides low-flow for rotation or tilt hydraulic attachments.Not for use with Offset Boom option 461025Joystick Activated with Electronic Proportional ControlsNotes:1) May be used stand alone or with any Case Excavator Auxiliary Hydraulics option.
$9,285.00
CAB OPTIONS
No FOPS Top Cab Guard No ChargeFOPS Top Cab Guard $1,146.00
No Front Guard No ChargeFront Guard - Wire Mesh Screen $1,326.00Front Stone Guard (OPG L1)vertical bars (two piece/upper and lower)
$1,973.00
Front Stone Guard (OPG L2)vertical bars (one piece/full length)
$2,324.00
Vandal GuardRemovable steel panels for front windshield
$574.00
41 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
SD_E5449 RAIN DEFLECTORXE5449X461555
SD_E5451 SUN VISORXE5451X461554
SD_E6300 EXCAVATOR BUCKET(S)XE6300X
SD_E5448 CATWALKXE5448X461553
SD_E6400 MEC/HYD QUICK COUPLERXE6400X781128
SD_E9730 SAFETY VALVEXE9730X481064
SD_E9739 FULL VIEW CAMERAXE9739X488055
SD_E9874 REFUEL PUMPXE9874X481257
CX350D CRAWLER EXCAVATOR US PRICE LIST
No Rain Deflector No ChargeRain DeflectorNot for use with Front grill guard - 2 x 2 mesh option 461142, Front rock guard (OPG 1) option 781986, orFront rock guard (OPG 2) option 461024.
$380.00
No Sun Visor No ChargeSun Visor $108.00
BUCKETS
No BucketBuckets may be ordered using Order Codes listed in the Factory Supplied Attachments Section
No Charge
ADDITIONAL OPTIONS
No Catwalk No ChargeCatwalk - Left and Right Sides(Note: catwalk is not compliant with ISO standards)
$2,110.00
No Quick Coupler No ChargeHydraulic Quick Coupler ReadyDoes not come with coupler. Must order coupler from Factory Supplied Attachments section
$2,909.00
No Hose Burst Check Valve No ChargeHose Burst Check Valve (HBCV)Located on Boom and Arm Cylinder
$9,501.00
No max view monitor No ChargeCase Max View Monitor $1,700.00
No Refuel Pump No ChargeRefuel Pump $1,296.00
42 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
Factory Supplied Attachments
Case Coupler Buckets
Case Pin-On Buckets
Direct Link Thumb
Progressive Link Thumb
Case Coupler
CX350D CRAWLER EXCAVATOR US PRICE LIST
Order Code Description Weight Factory Data List Price
84404288 42" Heavy-Duty Coupler Bucket with 5 teeth (1.73 cu. yd.) $9,389.00
84404289 48" Heavy-Duty Coupler Bucket with 5 teeth (2.03 cu. yd.) $10,077.00
84404290 54" Heavy-Duty Coupler Bucket with 6 teeth (2.33 cu. yd.) $10,950.00
84404275 36" Heavy-Duty Pin-On Bucket with 4 teeth (1.47 cu. yd.) $7,321.00
84404276 42" Heavy-Duty Pin-On Bucket with 5 teeth (1.75 cu. yd.) $7,875.00
84404277 48" Heavy-Duty Pin-On Bucket with 5 teeth (2.03 cu. yd.) $8,154.00
84405399 60" Heavy-Duty Pin-On Bucket with 6 teeth (2.60 cu. yd.) $10,781.00
84404278 42" HD Hi-Capacity Pin-On Bucket with 5 teeth (2.03 cu. yd.) $9,168.00
84404279 48" HD Hi-Capacity Pin-On Bucket with 5 teeth (2.36 cu. yd.) $9,784.00
84404280 54" HD Hi-Capacity Pin-On Bucket with 6 teeth (2.69 cu. yd.) $10,461.00
84404282 36" Severe-Duty Pin-On Bucket with 4 teeth (1.47 cu. yd.) $8,234.00
84404284 42" Severe-Duty Pin-On Bucket with 5 teeth (1.75 cu. yd.) $9,206.00
84404286 48" Severe-Duty Pin-On Bucket with 5 teeth (2.03 cu. yd.) $10,033.00
47609087 KIT, THUMB, HYD, 3-TINE,use with bucket only (3 tine)
1,365 LB $11,840.00
47609088 KIT, THUMB, HYD, 4-TINE,use with bucket only (4 tine)
1,425 LB $12,836.00
47609089 KIT, THUMB, HYD, 3-TINE,use with bucket and coupler (3 tine)
1,445 LB $12,280.00
47609090 KIT, THUMB, HYD, 4-TINE,use with bucket and coupler (4 tine)
1,505 LB $13,323.00
47609123 KIT, THUMB, PROG LINK, 3-use with bucket only (3 tine)
1,890 LB $15,080.00
47609124 KIT, THUMB, PROG LINK, 4-use with bucket and coupler (3 tine)
1,950 LB $15,376.00
47609125 KIT, THUMB, PROG LINK, 3-use with bucket only (4 tine)
1,970 LB $15,320.00
47609126 Progressive Link Thumb Kit with Coupler use with bucket and coupler (4 tine)
2,030 LB $15,963.00
47848466 Multi-Fit S Hyd.Pin Grabber Coupler Kit 2,100 LB $9,567.00
43 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
Weight88,200 LBS
SD_E5408 WORKING LIGHTS488134488135
SD_E5311 BOOM461029
SD_E5320 ARM/DIPPERSTICK488194
SD_E5199 TRACK SHOES9560005
9560006
SD_47083 OPERATOR'S MANUAL781981781980461540
SD_E5443 CAB GUARD (FOPS)XE5443X481070
SD_E5444 CAB GUARD (FRONT)XE5444X461142781986
461024
461552
SD_E5449 RAIN DEFLECTORXE5449X461555
SD_E5451 SUN VISORXE5451X461554
SD_E6300 EXCAVATOR BUCKET(S)XE6300X
SD_E5448 CATWALKXE5448X461553
SD_E9739 FULL VIEW CAMERAXE9739X488055
CX350D LONG REACH CRAWLER EXCAVATOR (LR) US PRICE LIST
COMMERCIAL MODEL Factory Data List PriceCX350D LR $483,818.00
CX350D LONG REACH CRAWLER EXCAVATOR (LR) US PRICE LIST
Order Code Description Weight Factory Data List PriceLIGHTS
Halogen Working Lights No ChargeLED Working Lights8 LED light and 1 side camera:2 LED light are mounted on the front (1 on boom, 1 on house) 2 LED lights are mounted on the rear(above the rear view camera)1 LED light mounted on each side (2)2 LED lights mounted on the top of the cab
$2,754.00
BOOMS
Standard Long Reach Boom No ChargeARMS
7,60 M ARM No ChargeTRACK SHOES
31.5" (800 mm) TG Steel ShoesTriple-Grouser Steel Shoes
No Charge
33.5" (850 mm) TG Steel ShoesTriple-Grouser Steel Shoes
$680.00
LANGUAGE
English Literature No ChargeSpanish Literature No ChargeFrench Canadian Literature No Charge
ADDITIONAL EQUIPMENT CXCCAB OPTIONS
No FOPS Top Cab Guard No ChargeFOPS Top Cab Guard $1,146.00
No Front Guard No ChargeFront Guard - Wire Mesh Screen $1,326.00Front Stone Guard (OPG L1)vertical bars (two piece/upper and lower)
$1,973.00
Front Stone Guard (OPG L2)vertical bars (one piece/full length)
$2,324.00
$2,110.00
No max view monitor No ChargeCase Max View Monitor $1,700.00
Vandal GuardRemovable steel panels for front windshield
$574.00
No Rain Deflector No ChargeRain DeflectorNot for use with Front grill guard - 2 x 2 mesh option 461142, Front rock guard (OPG 1) option 781986, orFront rock guard (OPG 2) option 461024.
$380.00
No Sun Visor No ChargeSun Visor $108.00
BUCKETS
No Bucket No ChargeADDITIONAL OPTIONS
No Catwalk No ChargeCatwalk - Left and Right Sides(Note: catwalk is not compliant with ISO standards)
44 of 45
Titan MachineryCase Excavators CX75C/CX80C and all D-Series
October 11, 2019
SD_E9874 REFUEL PUMPXE9874X481257
Factory Supplied Attachments
CX350D LONG REACH CRAWLER EXCAVATOR (LR) US PRICE LIST
84404185 60" Ditching Pin-On Bucket (1.02 cu yd.) $3,620.0084404186 72" Ditching Pin-On Bucket(1.22 cu. yd.) $3,921.00
Description Weight Factory Data List Price84404166 24" Heavy-Duty Pin-On Bucket with 4 teeth (.50 cu. yd.) $3,997.00
No Refuel Pump No ChargeRefuel Pump $1,296.00
CX350D LONG REACH CRAWLER EXCAVATOR (LR) US PRICE LIST
Order Code
84404167 30" Heavy-Duty Pin-On Bucket with 4 teeth (.84 cu. yd.) $4,475.00
84404168 36" Heavy-Duty Pin-On Bucket with 5 teeth (1.03 cu. yd.) $4,884.00
45 of 45
SINCE 1842
Mini Excavators
PM-18258 CASE CE 01/01/19 • MHEX-1
IndexMINI EXCAVATORS
Auger ............................................................................................................................................................. MHEX-2-4
Hydraulic Compactor .........................................................................................................................................MHEX-5
Hydraulic Hammer ........................................................................................................................................ MHEX-6-8
MHEX-2 • PM-18258 CASE CE 01/01/19
AugerMINI EXCAVATORS
Base Drive Unit packages include drive head, hoses and hydraulic quick disconnects. Must order mount bracket separately for specific excavator model, plus dipper quick disconnect kit and auger bits.
ADDITIONAL COMPONENTS (Cradle or pendulum mount and dipper quick disconnect kit required for complete unit)
PART NUMBER
WEIGHT LB
X975H200 AUGER DRIVE UNIT – 2" hex output shaft 87050963 168
X975R256 AUGER DRIVE UNIT – 2-9/16" round output shaft 87050964 168
X1475H200 AUGER DRIVE UNIT – 2" hex output shaft 87050965 170
X1475R256 AUGER DRIVE UNIT– 2-9/16" round output shaft 87050966 170
Quick Disconnect Kit (includes male and female quick disconnects for dipper shut-off )
Dipper Quick Disconnect kit (B-series and prior) 47451218 5
Dipper Quick Disconnect kit (C-series, stop valve connection) 48080817 5
Dipper Quick Disconnect kit (C-series, bulkhead connection) 48080818 5
Pendulum Mount Brackets
Pendulum Mount for CX14/CX17B/CX17C 87050968 57
Pendulum Mount for CX25/CX27B/CX26C/CX30C 87050969 57
Pendulum Mount for CX31/CX31B/CX36/CX36B, CX33C/CX37C 87050970 58
Pendulum Mount for CX47,CX50/CX50B,CX55B/CX57C/CX60C 87050971 61
Cradle Mount Brackets
Cradle Mount for CX14/CX17B/CX17C 48080864 93
Cradle Mount - Universal for all models (requires pin/bushing insert kit, mounting adapter or Klac adapter)
48080865 124
Pin/Bushing/Insert Kit for CX14/CX17B 47451172 45
Pin/Bushing/Insert Kit for CX25/CX27B 47451173 45
Pin/Bushing/Insert Kit for CX31/CX36/CX31B/CX36B 47451174 45
Pin/Bushing/Insert Kit for CX47/CX50B/CX55B 47451175 45
Pin/Bushing/Insert Kit for CX17C 48058049 31
Pin/Bushing/Insert Kit for CX26C/CX30C 48058050 36
Pin/Bushing/Insert Kit for CX33C/CX37C 48058051 36
Pin/Bushing Kit for CX57C/CX60C (Direct pin-on only) 48120314 20
Mounting Adapter for CX57C/CX60C (Use with mech or hyd pin grabber coupler)
48058052 151
Klac Coupler adapter for CX14/CX17B/CX17C 47451195 161
Klac Coupler adapter for CX25/CX27B/CX26C/CX30C 47451196 176
Klac Coupler adapter for CX31/CX36/CX31B/CX36B/CX47/CX50B/CX55B/CX33C/CX37C/CX57C/CX60C
47451197 203
Auger Options (Continued next page)
Cradle Mount
Pendulum Mount
PM-18258 CASE CE 01/01/19 • MHEX-3
AugerMINI EXCAVATORS
AUGER OPTIONS
HDF STYLE AUGERS PART NUMBER
WEIGHT LB2-9/16" Round Coupler
6" X 4' AUGER 9863606 409" X 4' AUGER 9863607 8612" X 4' AUGER 9863608 11515" X 4' AUGER 9863609 13618" X 4' AUGER 9863610 17624" X 4' AUGER 9863611 278
HDF STYLE AUGERS PART NUMBER
WEIGHT LB2" Hex Coupler
6" X 4' AUGER 9863626 409" X 4' AUGER 9863627 8612" X 4' AUGER 9863628 11515" X 4' AUGER 9863629 13618" X 4' AUGER 9863630 17624" X 4' AUGER 9863631 278
HDC STYLE AUGERS PART NUMBER
WEIGHT LB2-9/16" Round Coupler
6" X 4' AUGER 9863614 459" X 4' AUGER 9863615 9812" X 4' AUGER 9863616 12815" X 4' AUGER 9863617 13918" X 4' AUGER 9863618 20424" X 4' AUGER 9863619 272
HDC STYLE AUGERS PART NUMBER
WEIGHT LB2" Hex Coupler
6" X 4' AUGER 9863634 459" X 4' AUGER 9863635 9812" X 4' AUGER 9863636 12815" X 4' AUGER 9863637 13918" X 4' AUGER 9863638 20424" X 4' AUGER 9863639 272
HTF STYLE AUGERS PART NUMBER
WEIGHT LB2" Hex Coupler
18" X 4' AUGER 9863642 14424" X 4' AUGER 9863643 198
HTF STYLE AUGERS PART NUMBER
WEIGHT LB2-9/16" Round Coupler
18" X 4' AUGER 9863622 14424" X 4' AUGER 9863623 198
AUGER EXTENSIONS AND ADAPTERSPART
NUMBERWEIGHT
LB
2" HEX FEMALE TO 2-9/16" ROUND MALE 9863646 16
2-9/16" ROUND FEMALE TO 2" HEX MALE 9863647 15
12" EXTENSION, 2-9/16" ROUND 87042598 21
24" EXTENSION, 2-9/16" ROUND 87042600 39
12" EXTENSION, 2" HEX 87042601 20
24" EXTENSION, 2" HEX 87042602 32
48" EXTENSION, 2" HEX 84514060 57
Auger Options (Continued next page)
MHEX-4 • PM-18258 CASE CE 01/01/19
AugerMINI EXCAVATORS
FEATURES• Hydraulic relief valve protects the units from damage when the
auger hits large obstruction• Extensions and adapters available• The heavy duty all gear design gives these units a long life with
minimal maintenance and service costs.• Drive units are completely sealed with all moving components
running in oil for total lubrication on a constant basis
APPLICATIONS• Fencing, construction, nursery and landscaping
REQUIREMENTS FOR OPERATION• Standard auxiliary hydraulics• Cradle mount or pendulum mount bracket• Dipper quick disconnect kit• Auger bit
HDC STYLE AUGERSFor difficult ground conditions, compacted soils, heavy clay, asphalt, frozen ground, fracturable rock
• HD cast boring head• Hardened, drive-in teeth• Hardened “fishtail” point• HD double flighting• 4’ overall length
HDF STYLE AUGERSFor light to moderate ground conditions
• Fabricated boring head• Hardened, bolt-on teeth• Hardened “fishtail” point• HD double flighting• 4’ overall length
HTF STYLE AUGERSFor tree and shrub planting
• Fabricated boring head• Two-diameter design• Hardened, bolt-on teeth• Hardened “fishtail” point• HD double flighting• 4’ overall length
SPECIFICATIONS
X975 X1475
Flow (gpm) 6-15 10-25
RPM @ max flow 92 96
Max torque @ max flow and pressure (ft-lb) 1500 2377
Planetary Gear Reduction 3.8:1 3.8:1
Max auger diameter 24" 24"
Output shaft2-9/16" Round 2-9/16" Round
2" Hex 2" Hex
Warranty - Gearbox 5 Years 5 Years
Warranty - Other, (non-wear) 1 Year 1 Year
MODEL COMPATIBILITYC
X17
C
CX
26C
C
X30
C
CX
33C
CX
37C
CX
57C
CX
60C REQ. EQUIPMENT
DIP
PE
R A
UX
MO
UN
T B
RA
CK
ET
DIP
PE
R Q
D K
IT
CX
14C
X17
B
CX
25C
X27
B
CX
31C
X31
B
CX
36C
X36
B
CX
47/C
X50
CX
50B
CX
55B
X975 AUGER DRIVE • • R R R
X1475 AUGER DRIVE • • • • • R R R
PM-18258 CASE CE 01/01/19 • MHEX-5
Hydraulic CompactorMINI EXCAVATORS
FEATURES• Direct-drive, heavy-duty gear motor• Rubber shock mounts• Box section base plate construction• Angled shock mount suspension• Thick formed base plate• Flow control to prevent over speeding• Virtually zero-maintenance oil bathed
bearings• Readily adaptable to other compact
excavator brands• 2 year limited warranty
APPLICATIONS• Utilities, construction, road maintenance• Ideal for slope compaction
REQUIREMENTS FOR OPERATION• Uni- or bi-directional auxiliary
hydraulics• Pin/bushing/insert kit,
mounting adapter or Klac adapter for specific model
• Dipper quick disconnect kit
Unit includes compactor unit, hoses and quick disconnects.
PART NUMBER
WEIGHT LB
SC-30T HYDRAULIC COMPACTOR 47808593 450
ADDITIONAL COMPONENTS (Pin/bushing/insert kit or mount adapter and quick disconnect kit required for complete unit)
Quick Disconnect Kit (includes male and female quick disconnects for dipper)
Dipper Quick Disconnect kit (B-series and prior) 47451218 5
Dipper Quick Disconnect kit (C-series, stop valve connection) 48080817 5
Dipper Quick Disconnect kit (C-series, bulkhead connection) 48080818 5
Pin and Bushing Kits
Pin/Bushing/Insert Kit for CX31/CX36/CX31B/CX36B 47451174 45
Pin/Bushing/Insert Kit for CX47/CX50B/CX55B 47451175 45
Pin/Bushing/Insert Kit for CX33C/CX37C 48058051 36
Pin/Bushing Kit for CX57C/CX60C (Direct pin-on only) 48120314 20
Mounting Adapter for CX57C/CX60C (Use with mech or hyd pin grabber coupler)
48058052 151
Klac Coupler adapters (Pin and Bushing kits not required for these applications)
Klac Coupler adapter for CX31/CX36/CX31B/CX36B/CX47/CX50/CX50B/CX55B/CX33C/CX37C/CX57C/CX60C
47451197 203
MODEL COMPATIBILITY
CX
17C
CX
26C
C
X30
C
CX
33C
C
X37
C
CX
57X
C
X60
C REQ. EQUIPMENT
DIP
PE
R
AU
X
MO
UN
T
BR
AC
KE
T
DIP
PE
R
QD
KIT
CX
14C
X17
B
CX
25C
X27
B
CX
31C
X31
BC
X36
CX
36B
CX
47
CX
50C
X50
B
CX
55B
SC-30T HYDRAULIC COMPACTOR • • R R R
SPECIFICATIONSSC-30T
Impulse force 3,400 lbs (1540 kg)Cycles per min. 2100Operating weight 400 lbs (181 kg)Base plate size 19 x 20 in (483 x 508 mm)Input flow 10-25 gpm (38-95 l/min)Operating Pressure 1500-2100 psi (103-145 bar)
MHEX-6 • PM-18258 CASE CE 01/01/19
Hydraulic HammerMINI EXCAVATORS
CH-3M shown
Unit includes hammer body, hoses, quick disconnects, side plates and moil point.
ADDITIONAL COMPONENTS (Pin/bushing and quick disconnect kits required for complete unit)
ADDITIONAL COMPONENTS for CH-1M (Order as needed)
ADDITIONAL COMPONENTS for CH-2M (Order as needed)
PART NUMBER
WEIGHT LB
CH-1M HYDRAULIC HAMMER (includes pins) 47451184 237
CH-2M HYDRAULIC HAMMER 47451185 347
CH-3M HYDRAULIC HAMMER 47451186 512
CH-4M HYDRAULIC HAMMER 47451187 615
CH-5M HYDRAULIC HAMMER 47451188 743
Quick Disconnect Kit (includes male and female quick disconnects for dipper connection)
Dipper Quick Disconnect kit (B-series and prior) 47451218 5
Dipper Quick Disconnect kit (C-series, stop valve connection) 48080817 5
Dipper Quick Disconnect kit (C-series, bulkhead connection) 48080818 5
Pin and Bushing Kits
Pin/Bushing/Insert Kit for CX14/CX17B (use for CH-2M only) 47451172 45
Pin/Bushing/Insert Kit for CX25/CX27B 47451173 45
Pin/Bushing/Insert Kit for CX31/CX36/CX31B/CX36B 47451174 45
Pin/Bushing/Insert Kit for CX47/CX50B/CX55BX 47451175 45
Pin/Bushing/Insert Kit for CX17C (use for CH-2M only) 48058049 31
Pin/Bushing/Insert Kit for CX26C/CX30C 48058050 36
Pin/Bushing/Insert Kit for CX33C/CX37C 48058051 36
Pin/Bushing Kit for CX57C/CX60C (Direct pin-on only) 48120314 20
Mounting Adapter for CX57C/CX60C (Use with mech or hyd pin grabber coupler)
48058052 151
Klac Coupler adapters (Pin and Bushing kits not required for these applications)
Klac Coupler adapter for CX14/CX17B/CX17C (use for CH-2M only) 47451195 161
Klac Coupler adapter for CX25/CX27B/CX26C/CX30C 47451196 176
Klac Coupler adapter for CX31/CX36/CX31B/CX36B/CX47/CX50B/CX55BX/CX33C/CX37C/CX57C/CX60C
47451197 203
Lubrication System (Optional)
Auto Lube Kit - fits CH-1M to CH-5M 47766709 9
Moil Point (1 included with base hammer) 47451178 13
Chisel Point 47451179 13
Blunt Point 47451180 13
Moil Point (1 included with base hammer) 47451007 15
Chisel Point 47451008 17
Blunt Point 47451009 17
Frost Wedge (2.0" wide) 47451010 22
Asphalt Cutter (6" wide) 47451011 36
Tamping pad (8" X 8") 47451012 43
Hydraulic Hammers (Continued next page)
PM-18258 CASE CE 01/01/19 • MHEX-7
Hydraulic HammerMINI EXCAVATORS
ADDITIONAL COMPONENTS for CH-5M (Order as needed)
Moil Point (1 included with base hammer) 47451037 48
Chisel Point 47451039 53
Blunt Point 47451040 51
Asphalt Cutter (6" wide) 47451041 71
Tamping pad (12" X 12") 47451042 130
ADDITIONAL COMPONENTS for CH-4M (Order as needed)
Moil Point (1 included with base hammer) 47451026 33
Chisel Point 47451027 33
Blunt Point 47451028 36
Frost Wedge (2.5" wide) 47451029 42
Asphalt Cutter (6" wide) 47451030 42
Tamping pad (12" X 12") 47451031 126
Hydraulic Hammers (Continued next page)
ADDITIONAL COMPONENTS for CH-3M (Order as needed)
Moil Point (1 included with base hammer) 47451018 26
Chisel Point 47451019 26
Blunt Point 47451021 28
Frost Wedge (2.3" wide) 47451022 39
Asphalt Cutter (6" wide) 47451023 36
Tamping pad (12" X 12") 47451024 119
SPECIFICATIONSCH-1M CH-2M CH-3M CH-4M CH-5M
Impact class (ft-lb) 150 250 350 550 825Blows per min. 930-1300 600-1150 550-1000 580-1060 550-1000Operating wt. – lbs. (kg)
240 (109)
348 (158)
502 (228)
561 (273)
733 (332)
Tool diam. – in. (mm)
1.8 (45)
2.0 (51)
2.3 (58)
2.5 (64)
3.0 (76)
Input flow – gpm (l/min)
5.3-7.9 (20-30)
5.3-9.2 (20-35)
6.6-12 (25-45)
8-14.5 (30-55)
9.2-16 (35-61)
MODEL COMPATIBILITY
CX
17C
CX
26C
C
X30
C
CX
33C
C
X37
C
CX
57C
C
X60
C REQ. EQUIPMENT
DIP
PE
R A
UX
PIN
/BU
SH
ING
K
IT O
R K
LAC
A
DA
PT
ER
QD
KIT
CX
14C
X17
B
CX
25C
X27
B
CX
31
CX
31B
CX
36
CX
36B
CX
47
CX
50C
X50
B
CX
55B
CH-1M HYDRAULIC HAMMER • R R RCH-2M HYDRAULIC HAMMER • • R R RCH-3M HYDRAULIC HAMMER • • • R R RCH-4M HYDRAULIC HAMMER • • R R RCH-5M HYDRAULIC HAMMER • R R R
MHEX-8 • PM-18258 CASE CE 01/01/19
CX17C
Dipp
er Q
D Ki
t 48
0808
17 o
r 480
8081
8
CH-1M47451184
Optional points
Pin/Bushing/Insert kit48058049
orKLAC Adapter
47451195
CX26C CX30C
Pin/Bushing/Insert kit48058050
orKLAC Adapter
47451196
CH-2M47451185
Optional points
CX33CCX37C
Pin/Bushing/Insert kit48058051
orKLAC Adapter
47451197
CH-3M47451186
Optional points
CX57CCX60C
Pin/Bushing kit48120314 (Direct fit only) or
Mounting Adapter48058052 (mech or
hyd pin grabber coupler) orKLAC Adapter
47451197 (Klac coupler)
CH-4M47451187
Optional points
CH-5M47451188
Optional points
Hydraulic HammerMINI EXCAVATORS
FEATURES• Only 2 moving parts (piston
and control valve) means less maintenance
• Will not dry-fire• Low pressure gas charge• Low recoil• Low hydraulic surge• Dual tool retainer pins• Hoses and quick
disconnects included• Moil Point included• Gas recharge kit included• Operation/Service Parts Manual• 3 Year Warranty
APPLICATIONS• Demolition, construction,
utilities, road maintenance
REQUIREMENTS FOR OPERATION• Standard auxiliary hydraulics• Pin/bushing/insert kit,
mounting adapter or Klacadapter for specific model
• Dipper quick disconnect kit
HAMMER ORDERING GUIDE
Base Unit Model DipperQD Kit
Pin/Bushing/Insert kit or KLAC Adapter Hammer Model Points
CX14CX17B
Dipp
er Q
D Ki
t 47
4512
18
CH-1M47451184
Optional points
Pin/Bushing/Insert kit 47451172 orKLAC Adapter
47451195
CX25CX27B
Pin/Bushing/Insert kit 47451173 orKLAC Adapter
47451196
CH-2M47451185
Optional points
CX31CX31B CX36
CX36B
Pin/Bushing/Insert kit 47451174 orKLAC Adapter
47451197
CH-3M47451186
Optional points
CX47CX50
CX50BCX55B
Pin/Bushing/Insert kit 47451175orKLAC Adapter
47451197
CH-4M47451187
Optional points
CH-5M47451188
Optional points
SINCE 1842
Excavators
PM-18258 CASE CE 01/01/19 • EX-1
IndexEXCAVATORS
Guard Kit, Front Window ....................................................................................................................................... EX-2
Hydraulic Compactor ............................................................................................................................................. EX-3
Hydraulic Hammer .............................................................................................................................................. EX-4-6
Hammer Ordering Guide ........................................................................................................................................ EX-7
EX-2 • PM-18258 CASE CE 01/01/19
Guard Kits, Front WindowEXCAVATORS
Complete kit includes frame, guard and mounting hardware.
PART NUMBER
WEIGHT LB
FRONT WINDOW GUARD, STEEL MESH – SR MODELS 51427322 305
FRONT WINDOW GUARD, LEXAN – SR MODELS 51427323 340
FRONT WINDOW GUARD, STEEL MESH 51427324 310
FRONT WINDOW GUARD, LEXAN 51427325 345
MODEL COMPATIBILITY
CX
75C
SR
CX
80C
CX
145C
/D S
R
CX
130C
/D
CX
160C
/D
CX
210C
/D
CX
235C
SR
CX
245D
SR
CX
250C
/D
CX
300C
/D
CX
350C
/D
CX
470C
C
X49
0D
REQ’D EQUIPMENT
AU
X H
YD
HO
SE
KIT
TO
P C
AP
FRONT WINDOW GUARD, STEEL MESH – SR MODELS – 51427322 • • •
FRONT WINDOW GUARD, LEXAN – SR MODELS — 51427323 • • •
FRONT WINDOW GUARD, STEEL MESH — 51427324 • • • • • • •
FRONT WINDOW GUARD, LEXAN — 51427325 • • • • • • •
FEATURES• Provides additional layer of protection for
the front window from flying debris• Tubular frame for added strength• Bolt on design for quick and easy installation
(average installation time: two hours)• 6" spacer to allow easy access to the windshield• Welded tabs for added strength• High strength 10.8 class bolts• Crimped woven mesh gives you longer life
(¼" wire, 2" x 2" mesh)• LEXAN sheet versions available for
added protection (½" thick)• Steel components are powder coated
to protect from corrosion• Includes detailed installation instructions
and drawings• One year/2,000 hour warranty• Window guards are intended to protect
window/glass, and are not certifiedROPS guards; and do not meetOSHA Level 2 standards
APPLICATIONS• Construction• Demolition• Land clearing/maintenance
Steel Mesh
Lexan
PM-18258 CASE CE 01/01/19 • EX-3
Hydraulic CompactorsEXCAVATORS
Unit includes compactor unit and hoses.
PART NUMBER
WEIGHT LB
SC-60 HYDRAULIC COMPACTOR 47808607 900
SC-80 HYDRAULIC COMPACTOR 47808614 1025
SC-110 HYDRAULIC COMPACTOR 47808615 1475
SC-220 HYDRAULIC COMPACTOR 47808616 2250
ADDITIONAL COMPONENTS (Top cap required for complete unit)TOP CAP – CX75C SR, CX80C 47808620 254TOP CAP – CX130C/D, CX145C/D SR 47808621 409TOP CAP – CX160C/D 47808622 453TOP CAP – CX210C/D, CX235C SR, CX245D SR 47808624 631TOP CAP – CX250C/D 47808625 744TOP CAP – CX300C/D 47808629 811TOP CAP – CX350C/D 47808631 1054
MODEL COMPATIBILITY
CX
75C
SR
CX
80C
CX
130C
/DC
X14
5C/D
SR
CX
160C
/D
CX
210C
/D
CX
235C
SR
C
X24
5D S
R
CX
250C
/D
CX
300C
/D
CX
350C
/D
CX
470C
C
X49
0D
REQ’D EQUIPMENT
AU
X H
YD
HO
SE
KIT
TO
P C
AP
SC-60 HYDRAULIC COMPACTOR • R R
SC-80 HYDRAULIC COMPACTOR • • R R
SC-110 HYDRAULIC COMPACTOR • • • R R
SC-220 HYDRAULIC COMPACTOR • • R R
FEATURES• Direct-drive, heavy-duty gear motor• Rubber shock mounts• Box section base plate construction• Angled shock mount suspension• Thick formed base plate• Flow control to prevent over speeding• Virtually zero-maintenance oil bathed bearings• Readily adaptable to other excavator brands• 2 year limited warranty
APPLICATIONS• Utilities, construction, road maintenance• Ideal for slope compaction
REQUIREMENTS FOR OPERATION• Auxiliary hydraulics• Top cap
SPECIFICATIONS
SC-60 SC-80 SC-110 SC-220Impulse force (lb) 6400 8000 11350 22000Impulse force (kg) 2900 3630 5150 9980Cycles per min. 2100 2100 2100 2100Operating wt. (lbs) 850 975 1425 2200Operating wt. (kg) 386 442 646 998Base plate size (in) 24 x 26 24 x 34 27 x 30 32 x 42Base plate size (mm) 610 x 660 610 x 864 686 x 762 813 x 1067Input flow (gpm) 12-25 18-40 28-60 42-70Input flow (l/m) 45-95 68-151 106-227 159-265Operating Pressure (psi) 1700-2100 1700-2100 1800-2200 1800-2200Operating Pressure (bar) 117-145 117-145 124-152 124-152
EX-4 • PM-18258 CASE CE 01/01/19
Hydraulic HammerEXCAVATORS
HAMMER COMPONENTS (Unit includes hammer body and point as indicated)
Complete hammer package includes hammer body, standard point, top cap and hose kit for models as indicated.
PART NUMBER
WEIGHT LB
CH-6E HYDRAULIC HAMMER (includes moil point) 47575652 832
CH-7J HYDRAULIC HAMMER (includes chisel point) 47922307 2157
CH-100 HYDRAULIC HAMMER (includes chisel point) 47575660 2421
CH-151 HYDRAULIC HAMMER (includes chisel point) 47575667 3475
CH-190 HYDRAULIC HAMMER (includes chisel point) 47575671 4352
CH-230 HYDRAULIC HAMMER (includes chisel point) 47575675 5275
CH-310 HYDRAULIC HAMMER (includes chisel point) 47575676 6740
PART NUMBER
WEIGHT LB
CH-6E HYDRAULIC HAMMER (CX75C SR, CX80C) 47999864 1103
CH-7J HYDRAULIC HAMMER (CX130C/D, CX145C/D SR) 47999871 2583
CH-100 HYDRAULIC HAMMER (CX160C/D) 47999873 2891
CH-151 HYDRAULIC HAMMER (CX210C/D, CX235C SR, CX245D SR) 47999874 4042
CH-190 HYDRAULIC HAMMER (CX235C SR, CX245D SR) 47999875 5018
CH-190 HYDRAULIC HAMMER (CX250C/D) 47999876 5131
CH-190 HYDRAULIC HAMMER (CX300C/D) 51499028 5135
CH-230 HYDRAULIC HAMMER (CX300C/D) 47999877 6125
CH-230 HYDRAULIC HAMMER (CX350C/D) 47999878 6368
CH-310 HYDRAULIC HAMMER (CX470C, CX490D) 47999879 8168
CH-310 HYDRAULIC HAMMER (CX470C ME, CX500D ME) 51571343 8315
ADDITIONAL COMPONENTS (Hose kit and top cap required for complete unit)HOSE KITS HOSE KIT – CX75C SR, CX80C, CX130C/D, CX145C/D SR 47575770 17HOSE KIT – CX160C/D 47575779 17HOSE KIT – CX210C/D, CX235C SR, CX245D SR, CX250C/D 47575780 35HOSE KIT – CX300C/D, CX350C/D 47575781 39HOSE KIT – CX470C, CX490D 47600075 48TOP CAPSTOP CAP – CH-6E (CX75C,SR, CX80C) 47575722 254TOP CAP – CH-7J (CX130C/D, CX145C/D SR) 47922308 409TOP CAP – CH-100 (CX160C/D) 47575739 453TOP CAP – CH-151 (CX210C/D, CX235C SR, CX245D SR) 47575740 532TOP CAP – CH-190 (CX235C SR, CX245D SR) 47575741 631TOP CAP – CH-190 (CX250C/D, CX300C/D) 47575742 744TOP CAP – CH-230 (CX300C/D) 47575743 811TOP CAP – CH-230 (CX350C/D) 47575744 1054TOP CAP – CH-310 (CX470C, CX490D) 47575745 1380TOP CAP – CH-310 (CX470C ME, CX500D ME) 51571342 1527LUBRICATION SYSTEMSAuto Lube Kit - fits CH-6E to CH-310 47766712 12Auto Lube Shield Kit - fits CH-6E to CH-310 (use with 47766712) 47766713 5
Hydraulic Hammers (Continued next page)
PM-18258 CASE CE 01/01/19 • EX-5
Hydraulic HammerEXCAVATORS
MODEL COMPATIBILITY
CX
75C
SR
CX
80C
CX
130C
/DC
X14
5C/D
SR
CX
160C
/D
CX
210C
/D
CX
235C
SR
C
X24
5D S
R
CX
250C
/D
CX
300C
/D
CX
350C
/D
CX
470C
C
X49
0D
CX
470C
ME
CX
500D
ME
REQ’D EQUIPMENT
AU
X H
YD
HO
SE
KIT
TO
P C
AP
CH-6E HYDRAULIC HAMMER • R R R
CH-7J HYDRAULIC HAMMER • R R R
CH-100 HYDRAULIC HAMMER • R R R
CH-151 HYDRAULIC HAMMER • • R R R
CH-190 HYDRAULIC HAMMER • • • R R R
CH-230 HYDRAULIC HAMMER • • R R R
CH-310 HYDRAULIC HAMMER • • R R R
ADDITIONAL COMPONENTS for CH-190 (Order as needed)
ADDITIONAL COMPONENTS for CH-230 (Order as needed)
ADDITIONAL COMPONENTS for CH-310 (Order as needed)
Moil Point 47575882 275Chisel Point (1 included with base hammer) 47575883 284Blunt Point 47575884 275
Moil Point 47575885 275Chisel Point (1 included with base hammer) 47575886 284Blunt Point 47575887 275
Moil Point 47575890 417Chisel Point (1 included with base hammer) 47575891 462Blunt Point 47575893 417
Hydraulic Hammers (Continued next page)
ADDITIONAL COMPONENTS for CH-6E (Order as needed)
ADDITIONAL COMPONENTS for CH-7J (Order as needed)
ADDITIONAL COMPONENTS for CH-100 (Order as needed)
PART NUMBER
WEIGHT LB
Moil Point (1 included with base hammer) 47575854 82Chisel Point 47575855 86Blunt Point 47575856 90
Moil Point 47922309 146Chisel Point (1 included with base hammer) 47922310 148Blunt Point 47922311 154
Moil Point 47575871 146Chisel Point (1 included with base hammer) 47575872 148Blunt Point 47575873 154
ADDITIONAL COMPONENTS for CH-151 (Order as needed)Moil Point 47575876 254Chisel Point (1 included with base hammer) 47575877 262Blunt Point 47575879 271
EX-6 • PM-18258 CASE CE 01/01/19
Hydraulic HammerEXCAVATORS
FEATURES• Only 2 moving parts (piston and control valve) means less maintenance• Will not dry-fire• Low pressure gas charge• Low recoil• Low hydraulic surge• Dual tool retainer pins• Point included• Gas recharge kit included• Operation/Service Parts Manual• 3 Year Warranty (CH-310 – 1 year)
APPLICATIONS• Demolition, construction, road maintenance, quarry applications
REQUIREMENTS FOR OPERATION• Auxiliary hydraulics• Hose kit and top cap for specific model
CH-151 shown
SPECIFICATIONS
CH-6E CH-7J CH-100 CH-151 CH-190 CH-230 CH-310
Impact class – ft-lb (Nm)
1500(2034)
2000(2712)
3000(4067)
4500(6101)
5500(7457)
7500(10169)
10000(13558)
Blows per min. 550-1000 450-720 430-600 490-630 370-490 380-450 370-470
Operating wt. – lbs (kg)
990 (449)
2420 (1098)
2728 (1237)
3861 (1751)
4950 (2245)
5940 (2694)
7920 (3592)
Tool diam. – in (mm)
3.7 (94)
4.1(105)
4.5(114)
5.3(135)
5.5(140)
5.8(146)
6.3(160)
Input flow – gpm (l/min)
12-21 (45-80)
21-32 (80-120)
26 -37 (100-140)
42-52.8 (160-200)
42-55.5 (160-210)
48-60.8 (180-230)
63-80 (240-303)
Hydraulic Hammers (Continued next page)
PM-18258 CASE CE 01/01/19 • EX-7
CX75C SR
CX80C
CX130C/D
CX145C SR
CX160C/D
CX210C/D
CX210C/D LR
CX235C SR
CX250C/D
CX250C/DLR
CX300C/D
CX350C/D
CX470C
47575652CH-6E
47575660CH-100
47575667CH-151
CX700B
CX800B
47575722Top Cap
47575770Hose kit
47922308Top Cap
47575770Hose kit
47575740Top Cap
47575780Hose kit
47575742Top Cap
47575779Hose kit
47575744Top Cap
47575745Top Cap
47600075Hose kit
47922307CH-7J
47575855Chisel
47575739Top Cap
47575854Moil (incl)
No hammeroffered
No hammer offered
47575856Blunt
47922310Chisel (incl)
47922311Blunt
47922309Moil
47575872Chisel (incl)
47575873Blunt
47575871Moil
47575877Chisel (incl)
47575879Blunt
47575876Moil
47575671CH-190
47575883Chisel (incl)
47575884Blunt
47575882Moil
47575675CH-230
47575886Chisel (incl)
47575887Blunt
47575885Moil
47575743Top Cap
47575676CH-310
47575891Chisel (incl)
47575893Blunt
47575890Moil
47575781Hose kit
47575781Hose kit
47575780Hose kit
47575741Top Cap
47575780Hose kit
Hydraulic HammerEXCAVATORS
HAMMER ORDERING GUIDE
BASE UNIT MODEL HOSE KIT TOP CAP HAMMER MODEL POINTS
CX75C SR
CX80C
CX130C/D
CX145C SR
CX160C/D
CX210C/D
CX210C/D LR
CX235C SR
CX250C/D
CX250C/DLR
CX300C/D
CX350C/D
CX470C
47575652 CH-6E
47575660 CH-100
47575667 CH-151
CX700B
CX800B
47575722 Top Cap
47575770 Hose kit
47922308Top Cap
47575770 Hose kit
47575740 Top Cap
47575780 Hose kit
47575742 Top Cap
47575779 Hose kit
47575744 Top Cap
47575745 Top Cap
47600075 Hose kit
47922307 CH-7J
47575855Chisel
47575739 Top Cap
47575854Moil (incl)
No hammer offered
No hammeroffered
47575856Blunt
47922310 Chisel (incl)
47922311Blunt
47922309 Moil
47575872 Chisel (incl)
47575873Blunt
47575871Moil
47575877 Chisel (incl)
47575879Blunt
47575876Moil
47575671 CH-190
47575883 Chisel (incl)
47575884Blunt
47575882Moil
47575675 CH-230
47575886 Chisel (incl)
47575887Blunt
47575885Moil
47575743 Top Cap
47575676 CH-310
47575891 Chisel (incl)
47575893 Blunt
47575890Moil
47575781 Hose kit
47575781 Hose kit
47575780 Hose kit
47575741 Top Cap
47575780 Hose kit
CX470C, CX490D
CX145C/D SR
CX235C SRCX245D SR
CX470C ME, CX500D ME
47600075 Hose Kit
51571342 Top Cap
CX700B, CX800B, CX750D, CX750D ME
CX210C/D LR, CX250C/D LR,CX350D LR
PART NUMBER PART DESCRIPTION LIST PRICE
9863606 AUGER 6"X4' 256 RD- HDF 270.00$ 9863607 AUGER 9"X4' 256 RD- HDF 390.00$ 9863608 AUGER 12"X4' 256 RD- HDF 460.00$ 9863609 AUGER 15"X4' 256 RD- HDF 590.00$ 9863610 AUGER 18"X4' 256 RD- HDF 750.00$ 9863611 AUGER 24"X4' 256 RD- HDF 910.00$ 9863614 AUGER 6"X4' 256 RD- HDC 400.00$ 9863615 AUGER 9"X4' 256 RD- HDC 600.00$ 9863616 AUGER 12"X4' 256 RD- HDC 640.00$ 9863617 AUGER 15"X4' 256 RD- HDC 810.00$ 9863618 AUGER 18"X4' 256 RD- HDC 940.00$ 9863619 AUGER 24"X4' 256 RD- HDC 1,380.00$ 9863622 AUGER 18"X4' 256 RD- HTF 650.00$ 9863623 AUGER 24"X4' 256 RD- HTF 680.00$ 9863626 AUGER 6"X4' 200 HEX- HDF 270.00$ 9863627 AUGER 9"X4' 200 HEX- HDF 390.00$ 9863628 AUGER 12"X4' 200 HEX- HDF 460.00$ 9863629 AUGER 15"X4' 200 HEX- HDF 590.00$ 9863630 AUGER 18"X4' 200 HEX- HDF 750.00$ 9863631 AUGER 24"X4' 200 HEX- HDF 910.00$ 9863634 AUGER 6"X4' 200 HEX- HDC 400.00$ 9863635 AUGER 9"X4' 200 HEX- HDC 600.00$ 9863636 AUGER 12"X4' 200 HEX- HDC 640.00$ 9863637 AUGER 15"X4' 200 HEX- HDC 810.00$ 9863638 AUGER 18"X4' 200 HEX- HDC 940.00$ 9863639 AUGER 24"X4' 200 HEX- HDC 1,380.00$ 9863642 AUGER 18"X4' 200 HEX- HTF 650.00$ 9863643 AUGER 24"X4' 200 HEX- HTF 680.00$ 9863646 ADAPTER- 2 HEX F TO 256 RD M 230.00$ 9863647 ADAPTER- 256 RD F TO 2 HEX M 150.00$ 47451007 WORKING STEEL 195.00$ 47451008 TOOL- CHISEL POINT-2M 195.00$ 47451009 TOOL- BLUNT POINT-2M 195.00$ 47451010 TOOL- FROST WEDGE-2M 900.00$ 47451011 TOOL- ASPHALT CUTTER-2M 950.00$ 47451012 TOOL- TAMPING PAD-2M 1,245.00$ 47451018 WORKING STEEL 325.00$ 47451019 WORKING STEEL 325.00$ 47451021 TOOL- BLUNT POINT-3M 325.00$ 47451022 WORKING STEEL 955.00$ 47451023 TOOL- ASPHALT CUTTER-3M 980.00$ 47451024 TOOL- TAMPING PAD-3M 1,759.00$ 47451026 WORKING STEEL 400.00$ 47451027 WORKING STEEL 400.00$ 47451028 TOOL- BLUNT POINT-4M 400.00$ 47451029 TOOL- FROST WEDGE-4M 1,000.00$ 47451030 WORKING STEEL 1,040.00$ 47451031 WORKING STEEL 1,759.00$ 47451037 WORKING STEEL 450.00$ 47451039 WORKING STEEL 450.00$ 47451040 TOOL- BLUNT POINT 5M-6M 450.00$ 47451041 WORKING STEEL 1,500.00$ 47451042 WORKING STEEL 1,995.00$ 47451172 MX PIN AND BUSHING KIT 650.00$
PART NUMBER PART DESCRIPTION LIST PRICE
47451173 MX PIN AND BUSHING KIT 650.00$ 47451174 MX PIN AND BUSHING KIT 650.00$ 47451175 MX PIN AND BUSHING KIT 650.00$ 47451178 TOOL- MOIL POINT-1M 215.00$ 47451179 TOOL- CHISEL POINT-1M 215.00$ 47451180 WORKING STEEL 215.00$ 47451184 HYDRAULIC HAMMER 5,775.00$ 47451185 HYDRAULIC HAMMER 6,250.00$ 47451186 HYDRAULIC HAMMER 8,400.00$ 47451187 HYDRAULIC HAMMER 9,500.00$ 47451188 HYDRAULIC HAMMER 12,750.00$ 47451195 KIT- ADAPTER- KLAC - CNH17.18 727.00$ 47451196 KIT- ADAPTER- KLAC - CNH27 805.00$ 47451197 ADAPTR KLAC-CNH31.35.36.50.55 965.00$ 47575652 HAMMER- HYD- CH-6E 18,005.00$ 47575660 HAMMER- HYD- CH-100 41,380.00$ 47575667 HAMMER- HYD- CH-151 53,795.00$ 47575671 HAMMER- HYD- CH-190 61,445.00$ 47575675 HAMMER- HYD- CH-230 77,765.00$ 47575676 HAMMER- HYD- CH-310 108,410.00$ 47575722 BRACKET- HAMMER TOP CAP 2,600.00$ 47575739 BRACKET- HAMMER TOP CAP 3,200.00$ 47575740 BRACKET- HAMMER TOP CAP 3,105.00$ 47575741 BRACKET- HAMMER TOP CAP 3,667.00$ 47575742 BRACKET- HAMMER TOP CAP 3,667.00$ 47575743 BRACKET- HAMMER TOP CAP 4,042.00$ 47575744 BRACKET- HAMMER TOP CAP 4,042.00$ 47575745 BRACKET- HAMMER TOP CAP 4,667.00$ 47575770 KIT- HOSE- 6E/7E 395.00$ 47575779 KIT- HOSE- CH-100 420.00$ 47575780 KIT- HOSE- CH-141/151/190 678.00$ 47575781 KIT- HOSE- CH-230/310 935.00$ 47575854 TOOL- MOIL POINT - 6E 595.00$ 47575855 TOOL- CHISEL POINT - 6E 595.00$ 47575856 TOOL- BLUNT POINT - 6E 595.00$ 47575871 TOOL- MOIL POINT - CH-100 1,350.00$ 47575872 TOOL- CHISEL POINT - CH-100 1,350.00$ 47575873 TOOL- BLUNT POINT - CH-100 1,350.00$ 47575876 TOOL- MOIL POINT - CH-141/151 1,450.00$ 47575877 TOOL-CHISEL POINT - CH-141/151 1,450.00$ 47575879 TOOL-BLUNT POINT - CH-141/151 1,450.00$ 47575882 TOOL- MOIL POINT - CH-190 1,825.00$ 47575883 TOOL- CHISEL POINT - CH-190 1,825.00$ 47575884 TOOL- BLUNT POINT - CH-190 1,825.00$ 47575885 TOOL- MOIL POINT - CH-230 2,195.00$ 47575886 TOOL- CHISEL POINT - CH-230 2,195.00$ 47575887 TOOL- BLUNT POINT - CH-230 2,195.00$ 47575890 TOOL- MOIL POINT - CH-310 2,625.00$ 47575891 TOOL- CHISEL POINT - CH-310 2,625.00$ 47575893 TOOL- BLUNT POINT - CH-310 2,625.00$ 47600075 KIT- HOSE- CH-310 1,417.00$ 47766709 AUTO LUBE- 1M-6M HAMMER 1,525.00$ 47766712 KIT- AUTO LUBE- 6E-310 HAMMER 2,650.00$ 47766713 SHEILD KIT-AUTO LUBE-6E-310HAM 650.00$
PART NUMBER PART DESCRIPTION LIST PRICE
47808593 COMPACTOR- SC30T - CC MHEX 5,790.00$ 47808607 COMPACTOR- SC60 - CASE CX75-80 6,450.00$ 47808614 COMPACTOR SC80-CHEX CX130-160 7,290.00$ 47808615 COMPACTOR SC110-CHEX CX210-250 9,050.00$ 47808620 TOP CAP - SC60 (CX75-80) 1,695.00$ 47808621 TOP CAP - SC80 (CX130-145) 2,800.00$ 47808622 TOP CAP - SC80 (CX160) 2,800.00$ 47808624 TOP CAP - SC110 (CX210-235) 3,400.00$ 47808625 TOP CAP - SC110 (CX250) 3,400.00$ 47808629 TOP CAP - SC220 (CX300) 3,900.00$ 47808631 TOP CAP - SC220 (CX350) 3,900.00$ 47922307 HAMMER- CH-7J - CASE CHEX 29,255.00$ 47922308 TOP CAP - CH-7J 3,100.00$ 47922309 TOOL- MOIL CH-7J 1,150.00$ 47922310 TOOL- CHISEL CH-7J 1,150.00$ 47922311 TOOL- BLUNT CH-7J (HYD HAMMER) 1,150.00$ 47999864 CH-6E CMPLTE PKG FOR CX75C SR 21,000.00$ 47999871 CH-7J CMPLETE PKG FOR CX130C/D 32,750.00$ 47999873 CH-100 CMPLTE PKG FOR CX160C/D 45,000.00$ 47999874 CH-151 CMPLTE PKG FOR CX210C/D 58,000.00$ 47999875 CH-190 CMPLT PKG FOR CX235C-CP 66,500.00$ 47999876 CH-190 CMPLT PKG FOR CX250C-CP 66,500.00$ 47999877 CH-230 CMPLTE PKG FOR CX300C/D 83,000.00$ 47999878 CH-230 CMPLTE PKG FOR CX350C/D 83,000.00$ 47999879 CH-310 CMPLETE PKG FOR CX470C 115,000.00$ 48058049 KIT- PIN/BUSHING/INSERT 650.00$ 48058050 PIN/BUSHING KIT 650.00$ 48058051 IT- PIN/BUSHING/INSERT 650.00$ 48058052 KIT- MOUNT ADAPTER 1,788.00$ 48080864 KIT- AUGER MT- CRADLE 650.00$ 48080865 KIT- AUGER MT- CRADLE - UNIVER 650.00$ 51427322 KIT- FRT WINDOW GRD STEEL MESH 2,082.00$ 51427323 KIT- FRT WINDOW GRD- LEXAN 3,111.00$ 51427324 KIT- FRT WINDOW GRD STEEL MESH 2,082.00$ 51427325 KIT- FRT WINDOW GRD- LEXAN 3,111.00$ 51499028 CH-190 COMPLETE PKG FOR CX300C 66,680.00$ 51571342 TOP CAP - CH-310/CX500D ME 5,995.00$ 51571343 CH-310 COMPLETE PKG FOR CX500D ME 115,000.00$ 84514060 EXTENSION- AUGER H200 X 48" 270.00$ 87042598 AUGER EXTENSION- 12X256 RD 150.00$ 87042600 AUGER EXTENSION- 24X256 RD 200.00$ 87042601 AUGER EXTENSION- 12X2 HEX 190.00$ 87042602 AUGER EXTENSION- 24X2 HEX 220.00$ 87050963 AUGER DRIVE- X975H200 2,180.00$ 87050964 AUGER DRIVE- X975R256 2,230.00$ 87050965 AUGER DRIVE- X1475H200 2,060.00$ 87050966 AUGER DRIVE- X1475R256 2,060.00$ 87050968 PENDULUM MOUNT 610.00$ 87050969 PENDULUM MOUNT 610.00$ 87050970 PENDULUM MOUNT 390.00$ 87050971 PENDULUM MOUNT 460.00$
PRICE LIST
Fx-a Series Small Series Hydraulic Breakers
Effective Date: January 01, 2019
Energy Class Model Description List Price $
150 Ft Lb Fx15a Mono-Body Breaker designed for select Mini-Excavators
6,000.00 • Available in configuration: FB
Extra standard Working Steel (Moil point or Chisel or Blunt available) 225.00 Extra Mounting Hardware Set (Pins & Bushings) 395.00
275 Ft Lb Fx25a Mono-Body Breaker designed for select Mini-Excavators
7,140.00 • Available in configuration: FB ME FSP
Extra standard Working Steel (Moil point or Chisel or Blunt available) 275.00 Extra Mounting Hardware Set (Pins & Bushings) 395.00 Dingo Bracket and Mounting Hardware 1,175.00
375 Ft Lb Fx35a
Mono-Body Breaker designed for Mini-Excavators
•Available in configuration: CP FB FSP ME SS WB 8,600.00
Fx35aQT Mono-Body Breaker in a “Low Noise” Case with Top Cap for select Mini-Excavators 9,150.00 Extra standard Working Steel (Moil or Chisel or Blunt) 325.00 Extra Mounting Hardware Set (Pins & Bushings) – for a Universal Top Cap 525.00 Additional Top Cap with Mounting for Breaker using FSP or QT configuration 1,675.00 Optional 2-Position Skid-Steer Bracket for ME, FSP, WB or QT configuration (in some instances, extra mtg req) 1,700.00 Dingo Bracket and Mounting Hardware 1,175.00
550 Ft Lb
Fx45a Mono-Body Breaker designed for select Mini-Excavators & Backhoes
•Available in configuration: CP FB FSP ME SS WB WB5010,880.00
Fx45aQT Mono-Body Breaker in a “Low Noise” Case with Top Cap for select Mini-Excavators 11.650.00 Extra standard Working Steel (Moil or Chisel or Blunt) 350.00 Extra Mounting Hardware Set (Pins & Bushings) – for a Universal Top Cap 575.00 Additional Top Cap with Mounting for Breaker using FSP or QT configuration 1,675.00 Optional 2-Position Skid-Steer Bracket for ME, FSP, WB or QT configuration (in some instances, extra mtg req) 1,700.00
800 Ft Lb
Fx55a Mono-Body Breaker designed for Mini-Excavators & Backhoes
•Available in configuration: CP FB FSP ME SS WB WB5013,250.00
Fx55aQT Mono-Body Breaker in a “Low Noise” Case with Top Cap for select Mini-Excavators 14,230.00 Extra standard Working Steel (Moil or Chisel or Blunt) 450.00 Extra Mounting Hardware Set (Pins & Bushings) – for a Universal Top Cap 575.00 Additional Top Cap with Mounting for Breaker using FSP or QT configuration 1,675.00 Optional 2-Position Skid-Steer Bracket for ME, FSP, WB or QT configuration (in some instances, extra mtg req) 1,700.00
PRICE LIST
Models F6, F9, Fx125 Medium Series Hydraulic Breakers
Effective Date: January 01, 2019
Energy Class Model Description List Price $
1,000 Ft Lb F6
Hydraulic Breaker designed for select Mini-Excavators and Backhoes
•Available in configuration: FSP ME TLB SS 15,370.00
F6Qt Hydraulic Breaker in a “Low Noise” Case with Top Cap for select Mini-Exc and Backhoes 16,600.00 Extra standard Working Steel (Moil point or Chisel or Blunt available) 535.00 Extra Mounting Hardware Set (Pins & Bushings) 575.00 Additional Top Cap with Mounting for Breaker using FSP or QT configuration 1,800.00
1,500 Ft Lb F9
Hydraulic Breaker designed for select Mini-Excavators and Backhoes
•Available in configuration: FSP TLB 22,760.00
F9QT Hydraulic Breaker in a “Low Noise” Case with Top Cap for select Mini-Exc and Backhoes 24,450.00 Extra standard Working Steel (Moil or Chisel or Blunt) 700.00 Extra Mounting Hardware Set (Pins & Bushings) 575.00 Additional Top Cap with Mounting for Breaker using FSP or QT configuration 2,275.00
2,000 Ft Lb
Fx125 TLB Mono-Body Breaker assembled in TLB Side Plates for select Mini-Excavators 26,800.00
Fx125 Qtv Mono-Body Breaker assembled in a “Low Noise” Case with Top Cap for select Mini-Excavators 29,900.00 Extra standard Working Steel (Moil or Chisel or Blunt) 950.00 Extra Mounting Hardware Set (Pins & Bushings) – for a Universal Top Cap 1,075.00 Additional Top Cap with Mounting for Breaker using FSP or QT configuration 2,825.00
FSP Breaker assembled in full length, flanged side plates & includes: a top cap, all mounting, (2) hose whips and (1) st’d working steel (moil, chisel, or blunt)
ME Breaker assembled in full length side plates expressly for mini-exc. & includes: (2) hose whips, all mtg, and (1) st’d working steel (moil, chisel, or blunt)
Qt/Qtv Breaker assembled in a full length & protective, low noise case, includes: a top cap, mounting, (2) hose whips & (1) st’d working steel (moil, chisel, or blunt) D
esc r
ipti
on
of
Co
nfi
gura
tio
ns
PRICE LIST
Fx Series Large Hydraulic Breakers for 13 to 61 Ton Excavators
Effective Date: January 01, 2019
Energy Class Model Description List Price $
3,250 Ft Lb Fx175 Mono-Body Breaker encased in a Qtv Cradle, complete with Top Cap, required Mounting and (1) standard Working Steel (Moil or Chisel or Blunt Style) 38,150.00
Extra standard Working Steel (Moil point or Chisel or Blunt available) 1,350.00 Extra Mounting Hardware Set (Pins & Bushings) 1,700.00 Additional Top Cap (with 13” between centers) with Pins ~ for the Qtv Cradle 3,400.00
4,250 Ft Lb Fx225 Mono-Body Breaker encased in a Qtv Cradle, complete with Top Cap, required Mounting and (1) standard Working Steel (Moil or Chisel or Blunt Style) 47,500.00
Extra standard Working Steel (Moil point or Chisel or Blunt available) 1,675.00 Extra Mounting Hardware Set (Pins & Bushings) 1,700.00 Additional Top Cap with Pins ~ for the Qtv Cradle 3,950.00
5,250 Ft Lb Fx275 Mono-Body Breaker encased in a Qtv Cradle, complete with Top Cap, required Mounting and (1) standard Working Steel (Moil or Chisel or Blunt Style) 56,800.00
Extra standard Working Steel (Moil point or Chisel or Blunt available) 1,850.00 Extra Mounting Hardware Set (Pins & Bushings) 1,700.00 Additional Top Cap with Pins ~ for the Qtv Cradle 3,950.00
6,500 Ft Lb Fx375 Mono-Body Breaker encased in a Qtv Cradle, complete with Top Cap, required Mounting and (1) standard Working Steel (Moil or Chisel or Blunt Style) 73,950.00
Extra standard Working Steel (Moil point or Chisel or Blunt available) 2,075.00 Extra Mounting Hardware Set (Pins & Bushings) 1,700.00 Additional Top Cap with Pins ~ for the Qtv Cradle 4,500.00
8,500 Ft Lb Fx475 Mono-Body Breaker encased in a Qtv Cradle, complete with Top Cap, required Mounting and (1) standard Working Steel (Moil or Chisel or Blunt Style) 93,050.00
Extra standard Working Steel (Moil point or Chisel or Blunt available) 2,550.00 Extra Mounting Hardware Set (Pins & Bushings) 1,700.00 Additional Top Cap with Pins ~ for the Qtv Cradle 5,100.00
PRICE LIST
Accessories Price ListFor Small "Fx-a" Series Hammers Effective: January 1, 2019
Model Part Number Description List Price $
All Models KBM21805 Nitrogen Gas Charge Kit 375.00 K14490 Regulator & Gauge Set 925.00
Fx15a
KF125115 Moil Point, 1.42” Dia. (6 lbs.) 225.00 KF125114 Chisel Bit, 1.42” Dia. (6 lbs.) 225.00 KF125111 Blunt Tip, 1.42” Dia. (6 lbs.) 225.00 (Various) Mounting Pins & Bushing Set 395.00
Fx25a
KF225115 Moil Point, 1.77” Dia. (11 lbs.) 275.00 KF225114 Chisel Bit, 1.77” Dia. (11 lbs.) 275.00 KF225111 Blunt Tip, 1.77” Dia. (11 lbs.) 275.00 (Various) Mounting Pins & Bushing Set 395.00
Fx35a
KF325115 Moil Point, 2.0” Dia. (17.5 lbs.) 325.00 KF325114 Chisel Bit, 2.0” Dia. (17.5 lbs.) 325.00 KF325111 Blunt Tip, 2.0” Dia. (17.5 lbs.) 325.00 KF325077 Asphalt Cutter ~ Cross Cut 725.00 KF330323 Universal Top Cap with Mounting Pins 1,550.00 (Various) OEM Top Cap with Mounting Pins 1,550.00 (Various) Mounting Pins & Bushing Set 575.00
Fx45a
KF425115 Moil Point, 2.38” Dia. (24 lbs.) 350.00 KF425114 Chisel Bit, 2.38” Dia. (24 lbs.) 350.00 KF425111 Blunt Tip, 2.38” Dia. (24 lbs.) 350.00 KF425049 Asphalt Cutter ~ Cross Cut 945.00 KF425048 Asphalt Cutter ~ Inline 945.00 KF425045 Tamper Assembly - 12” square 1,075.00 KF430500 Universal Top Cap with Mounting Pins 1,550.00 (Various) OEM Top Cap with Mounting Pins 1,550.00 (Various) Mounting Pins & Bushing Set 575.00 K26666 Two-Position Skid-Steer Bracket 1,700.00 KBM16500 Auto-Lubrication System Kit (carrier mounted) 1,380.00 K18410 Pin-on, 1/4 -Yard Wain-Roy® Bracket 1,950.00
Fx55a
KF525115 Moil Point, 2.68” Dia., 33 lbs. 450.00
KF525114 Chisel Bit, 2.68” Dia., 33 lbs. 450.00 KF525111 Blunt Tip, 2.68” Dia., 33 lbs. 450.00 KF525085 Asphalt Cutter ~ Cross Cut 1,050.00 KF525084 Asphalt Cutter ~ Inline 1,050.00 KF525081 Tamper Assembly - 12” square 1,200.00 KBM630650 Universal Top Cap with Mounting Pins 1,800.00 (Various) OEM Top Cap with Mounting Pins 1,675.00 (Various) Mounting Pins & Bushing Set 575.00 K26666 Two-Position Skid-Steer Bracket 1,700.00 KBM16500 Auto-Lubrication System (carrier mounted) 1,380.00 K18410 Pin-on, 1/4 -Yard Wain-Roy® Bracket 1,950.00
PRICE LIST
Accessories Price ListFor Medium "F & Fx" Series Hammers Effective: January 1, 2019
Model Part Number Description List Price $
All Models KBM21805 Nitrogen Gas Charge Kit 375.00 K14490 Regulator & Gauge Set 925.00
F6
KF625113 Moil Point, 3.0” Dia. (47 lbs.) 535.00
KF625114 Chisel Bit, 3.0” Dia. (47 lbs.) 535.00
KF625111 Blunt Tip, 3.0” Dia. (47 lbs.) 535.00
KF625057 Asphalt Cutter ~ Cross Cut 1,160.00
KF625056 Asphalt Cutter ~ Inline 1,160.00
KF625053 Tamper Assembly - 12” square 1,295.00
KBM630650 Universal Top Cap with Mounting Pins 1,800.00
(Various) OEM Top Cap with Mounting Pins 1,800.00
(Various) Mounting Pins & Bushing Set 575.00
K26666 Two-Position Skid-Steer Mounting Bracket 1,700.00
KBM16500 Auto-Lubrication System Kit (carrier mount) 1,380.00
K18410 Pin-on 1/4 -Yard Wain-Roy® Bracket 1,950.00
F9
KF925113 Moil Point, 3.5” Dia. (78 lbs.) 700.00
KF925114 Chisel Bit, 3.5” Dia. (78 lbs.) 700.00
KF925111 Blunt Tip, 3.5” Dia. (78 lbs.) 700.00
KF925065 Asphalt Cutter ~ Cross Cut 1,265.00
KF925064 Asphalt Cutter ~ Inline 1,265.00
KF925061 Tamper Assembly - 12” square 1,380.00
KBM930950 Universal Top Cap w/Pins 2,275.00
(Various) OEM Top Cap with Mounting Pins 2,275.00
(Various) Mounting Pins & Bushing Set 575.00
K26666 Two-Position Skid-Steer Bracket 1,700.00
KBM22218 Underwater Kit 155.00
KBM16500 Auto-Lubrication System (carrier mount) 1,380.00
K18410 Pin-on, 1/4 -Yard Wain-Roy® Bracket 1,950.00
Fx125
KFX12525225 Moil Point, 4.33” Dia. (145 lbs.) 950.00
KFX12525224 Chisel Bit, 4.33” Dia. (145 lbs.) 950.00
KFX12525221 Blunt Tip, 4.33” Dia. (145 lbs.) 950.00
KF12050 Universal Top Cap with Mounting Pins 2,825.00
(Various) OEM Top Cap with Mounting Pins 2,825.00
(Various) Mounting Pins & Bushing Set 1,075.00
KBM22221 Underwater Kit 205.00
KBM16501 Auto-Lubrication System Kit (carrier mount) 1,825.00
PRICE LIST
Accessories Price List page 1 of 2For Large "Fx" Series Hammers Effective: January 1, 2019
Model Part Number Description List Price $
All Models KBM21805 Nitrogen Gas Charge Kit 375.00
K14490 Regulator & Gauge Set 925.00
Fx175
KFX17525225 Moil Point, 4.72” Dia. (220 lbs.) 1,350.00
KFX17525224 Chisel Bit, 4.72” Dia. (220 lbs.) 1,350.00
KFX17525221 Blunt Tip, 4.72” Dia. (220 lbs.) 1,350.00
KF12050 Universal Top Cap (max stick width of 13”) w/ Mounting Pins 3,400.00
KFX175050 Universal Top Cap (13” to 15” stick width) w/ Mounting Pins 3,400.00
(Various) OEM Top Cap with Mounting Pins 3,400.00
(Various) Mounting Pins & Bushing Set 1,700.00
KBM22220-FX Underwater Kit 205.00
KBM16501 Auto-Lubrication System Kit (carrier mounted) 1,825.00
KBM16556 One-Shot Lubrication System Kit (Hammer mounted) 3,090.00
Fx225
KFX22525225 Moil Point, 5.25” Dia. (280 lbs.) 1,675.00
KFX22525224 Chisel Bit, 5.25” Dia. (280 lbs.) 1,675.00
KFX22525221 Blunt Tip, 5.25” Dia. (280 lbs.) 1,675.00
KF22050 Universal Top Cap with Mounting Pins 3,950.00
(Various) OEM Top Cap with Mounting Pins 3,950.00
(Various) Mounting Pins & Bushing Set 1,700.00
KBM22220-FX Underwater Kit 205.00
KBM16501 Auto-Lubrication System Kit (carrier mounted) 1,825.00
KBM16557 Continuous Lubrication System Kit (Hammer mounted) 3,090.00
Fx275
KFX27525225 Moil Point, 5.51” Dia. (320 lbs.) 1,850.00
KFX27525224 Chisel Bit, 5.51” Dia. (320 lbs.) 1,850.00
KFX27525221 Blunt Tip, 5.51” Dia. (320 lbs.) 1,850.00
KF22050 Universal Top Cap with Mounting Pins 3,950.00
(Various) OEM Top Cap wikth Mounting Pins 3,950.00
(Various) Mounting Pins & Bushing Set 1,700.00
KBM22220-FX Underwater Kit 205.00
KBM16501 Auto-Lubrication System Kit (carrier mounted) 1,825.00
KBM16536D One-Shot Lubrication System Kit (Hammer mounted) 3,090.00
KBM16557 Continuous Lubrication System Kit (Hammer mounted) 3,090.00
PRICE LIST
Accessories Price List page 2 of 2For Large "Fx" Series Hammers Effective: January 1, 2019
Model Part Number Description List Price $
All Models KBM21805 Nitrogen Gas Charge Kit 375.00
K14490 Regulator & Gauge Set 925.00
Fx375
KFX37525225 Moil Point, 6.10” Dia. (330 lbs.) 2,075.00
KFX37525224 Chisel Bit, 6.10” Dia. (330 lbs.) 2,075.00
KFX37525221 Blunt Tip, 6.10” Dia. (330 lbs.) 2,075.00
KF35050 4,500.00
KF35051 4,500.00
(Various) 4,500.00
(Various) 1,700.00
KBM22220-FX 205.00
KBM16502 2,215.00
KBM16558
Universal Top Cap w/ Mounting Pins; 475mm (18.7”) Centers
Universal Top Cap w/Mounting Pins; 572mm (22.52”) Centers
OEM Top Cap with Mounting Pins
Mounting Pins & Bushing Set
Underwater Kit
Auto-Lubrication System Kit (carrier mounted)
Continuous Lubrication System Kit (Hammer mounted)
3,090.00
Fx475
KFX47525225 2,550.00
KFX47525224 2,550.00
KFX47525221 2,550.00
KF45050 5,100.00
KF45051 5,100.00
(Various) 5,100.00
(Various) 1,700.00
KBM22220-FX 205.00
KBM16502 2,215.00
KBM16559
Moil Point, 6.5” Dia., 475 lbs.
Chisel Bit, 6.5” Dia., 475 lbs.
Blunt Tip, 6.5” Dia., 475 lbs.
Universal Top Cap w/ Mounting Pins; (21.14”) 537mm Centers
Universal Top Cap w/ Mounting Pins; 572mm (22.52”) Centers
OEM Top Cap with Mounting Pins
Mounting Pins & Bushing Set
Underwater Kit
Auto-Lubrication System (Carrier Mtd.)
Continuous Lubrication System Kit (Hammer Mtd.)
3,090.00
PRICE LIST
HydraPak; Vibratory Plate Soil Compactors Effective Date: January 01, 2019
Impulse Force Model Description List Price $
3,000 lbs.
HP35ME 12” wide Vibratory Plate Soil Compactor / Sheeting Driver; Direct Pin-on Style 5,095.00
Available with Hanger Bracket: UNV
HP35ME-S_ 12” wide Vibratory Plate Soil Compactor / Sheeting Driver; for specific Mounting 5,490.00 Available with Hanger Bracket: TLB BOB KU80 WR CP WB WB50 OEM
HP35ME-S 12” wide Vibratory Plate Soil Compactor / Sheeting Driver; with Flat Top Hanger Bracket & Specific Top Cap 6,380.00 Available with Hanger Bracket: FT
6,500 lbs.
HP65II 18TLB 18” wide Vibratory Plate Soil Compactor / Sheeting Driver; Direct Pin-on Style 6,080.00
Available with Hanger Bracket: TLB
HP65II 18_ 18” wide Vibratory Plate Soil Compactor / Sheeting Driver; for specific Mounting 6,545.00 Available with Hanger Bracket: FB WR
HP65II 18FT 18” wide Vibratory Plate Soil Compactor / Sheeting Driver; with Flat Top Hanger Bracket & Specific Top Cap 6,940.00 Available with Hanger Bracket: FT
HP65II TLB 24” wide Vibratory Plate Soil Compactor / Sheeting Driver; Direct Pin-on Style 6,080.00 Available with Hanger Bracket: TLB
HP65II _ 24” wide Vibratory Plate Soil Compactor / Sheeting Driver; for specific Mounting 6,545.00 Available with Hanger Bracket: FB WR
HP65II FT 24” wide Vibratory Plate Soil Compactor / Sheeting Driver; with Flat Top Hanger Bracket & Specific Top Cap 6,940.00 Available with Hanger Bracket: FT
7,800 lbs.
HP75 TLB 24” wide Vibratory Plate Soil Compactor / Sheeting Driver; Direct Pin-on Style 6,345.00
Available with Hanger Bracket: TLB
HP75 _ 24” wide Vibratory Plate Soil Compactor / Sheeting Driver; for specific Mounting 6,890.00 Available with Hanger Bracket: FB WR
HP75 FT 24” wide Vibratory Plate Soil Compactor / Sheeting Driver; with Flat Top Hanger Bracket & Specific Top Cap 7,275.00 Available with Hanger Bracket: FT
UNV Universal mount, direct pin-on for mini-excavators not utilizing a quick coupler
TLB For direct pin-on for backhoe mounting
BOB For carriers utilizing the Bobcat Exchange System®
FT To accommodate carriers requiring specific OEM mounting by utilizing a specific top cap
KU80 For carriers utilizing the Kubota 7880® coupler
WR For carriers utilizing the Wain-Roy® mounting system
CP For carriers utilizing the CP-027® mounting system
WB For carriers utilizing the Weldco-Beales 27/35 coupler®
WB50 For carriers utilizing the Weldco-Beales 50 coupler®
OEM For carriers utilizing OEM pin spacing
FB A “Floating-Boss” mounting system for carriers requiring OEM pin centers
De s
crip
tio
n o
f C
on
figu
rati
on
s
PRICE LIST
HydraPak; Vibratory Plate Soil Compactors Effective Date: January 01, 2019
Impulse Force Model Description List Price $
13,500 lbs.
HP135II 28” wide Vibratory Plate Soil Compactor / Sheeting Driver; Direct Pin-on Style 9,850.00
Available with Hanger Bracket: UNV
Additional mounting sets to accommodate alternative mountings 1,700.00
HP135II _ 28” wide Vibratory Plate Soil Compactor / Sheeting Driver; for specific Mounting 10,740.00 Available with Hanger Bracket: FT FB
Additional mounting sets to accommodate alternative mountings 1,700.00 Additional top cap to accommodate alternative mountings 3,400.00
21,000 lbs.
HP210II 28” wide Vibratory Plate Soil Compactor / Sheeting Driver; Direct Pin-on Style 14,320.00
Available with Hanger Bracket: UNV
Additional mounting sets to accommodate alternative mountings 1,700.00
HP210II _ 28” wide Vibratory Plate Soil Compactor / Sheeting Driver; for specific Mounting 15,220.00 Available with Hanger Bracket: FT FB
Additional mounting sets to accommodate alternative mountings 1,700.00 Additional top cap to accommodate alternative mountings 3,950.00
UNV Universal mount, direct pin-on for mini-excavators not utilizing a quick coupler
FB A “Floating-Boss” mounting system for carriers requiring OEM pin centers
FT To accommodate carriers requiring specific OEM mounting by utilizing a specific top cap
Note: HydraPaks are supplied with all necessary Mounting Pins and Bushings (when applicable)
De s
crip
tio
n o
f C
on
figu
rati
on
s
PRICE LIST
Boom Mounted Static Wheel Compactorsfor Mini-Excavators and Excavators Effective: January 1, 2019
Model Description Price
CW 18III Static Compaction Wheel, 18” Wide, Rectangular Padfoot, Pin-on Mounting $7,500.00
Extra Mounting Hardware Set (Pins and Bushings) for standard compactor 575.00
CW 18IV WR Static Compaction Wheel, 18” Wide, Rectangular Padfoot, Wainroy® mounting $7,000.00
CW 24III Static Compaction Wheel, 24” Wide, Rectangular Padfoot, Pin-on Mounting $10,500.00
Extra Mounting Hardware Set (Pins and Bushings) for standard compactor 1,075.00
CW 36III Static Compaction Wheel, 36” Wide, Rectangular Padfoot, Pin-on Mounting $13,500.00
Extra Mounting Hardware Set (Pins and Bushings) for standard compactor 1,700.00
FAE USA
2019PRICE LIST
All p
ictu
res
show
n ar
e fo
r illu
stra
tion
purp
ose
only
. Act
ual p
rodu
ct m
ay v
ary
due
to p
rodu
ct e
nhan
cem
ent.
MULCHER WITH HAMMER/FLAIL ROTOR FOR EXCAVATORS.
from 4 to 10.5 gal/min Ø 1,5 in maxPML/HY from 1,5 to 3,5 t
OPTIONS
16cc gear motor with integrated anticavitation valve - (9 - 10.5 GPM)Customized attachment bracketAttachment plate with self levelling deviceMultiple tooth options
STANDARD EQUIPMENT
Anti dust machine bodyBelt transmission8cc gear motor with integrated anticavitation valve - (4 - 5.3 GPM)Hydraulic hosesWelded counter bladeRear rollerSelf levelling protection rubberPossibillity to have the rotor equipped with PML hammers or Y-flailsBlank attachment plate
EXCAVATOR MULCHERS
Data refers to machine as standard.
MODELFlow rate(gal/min)
Pressure(PSI)
Excavator weight (t)
Working width
(in)
Weight(Ibs)
Max shredding diameter
(in)
No. teeth type
hammers flails
min max min max min max PML Y
PML/HY 50 4 5.3 2200 3045 1.5 3.5 20 397 1,5 8 8
PML/HY 70 4 5.3 2200 3045 2.0 3.5 28 430 1,5 10 10
PML/HY 90 4 5.3 2200 3045 2.5 3.5 36 463 1,5 14 14
Hammer PML (standard) Flails Y/2 (option)
PR
ICE
LIS
T
Part number Part description Notes Price $
PML/HY010800050 PML/HY-050 Light Duty Mulcher for excavator 6,304.00 010800070 PML/HY-070 Light Duty Mulcher for excavator 6,619.00 010800090 PML/HY-090 Light Duty Mulcher for excavator 6,934.00
Options500000458-O Customized attachment bracket EX/LIGHT Pin on - Pin graber 2,060.00
D108001780-O Attachment plate with floating system for PML-M/HY 799.00 780000433-O Motor with extension shaft Casappa 16cc. From 9 to 10.5 GPM -
Spare Parts110822000 Hammer PML 20.30 D108002060 "Y" blade kit PML 20.22 900516162 Hex head set bolt UNI 5737 M16 x 80 10.9 black 1.80 910616001 Nylock lock nut UNI 7473 M16 10 zn 1.21 842125002 Belt XPB Gates Quad Power l=1250 2 belts per unit 51.72 500000458 Customized attachment bracket EX/LIGHT including blank plate and custom made ears 2,800.00
All p
ictu
res
show
n ar
e fo
r illu
stra
tion
purp
ose
only
. Act
ual p
rodu
ct m
ay v
ary
due
to p
rodu
ct e
nhan
cem
ent.
PMM/HY
EXCAVATOR MULCHERS
MULCHER WITH HAMMER/FLAIL ROTOR FOR EXCAVATORS.
OPTIONS
27cc gear motor with integrated anticavitation valve - (16 - 18 GPM)
17/34cc variable manual displacement hydraulic piston motor with relief and anticavitation valve - (11 - 23 GPM)
Customized attachment bracketAttachment plate with self levelling deviceMultiple tooth options
STANDARD EQUIPMENT
Anti dust machine bodyBelt transmission16cc gear motor with integrated anticavitation valve - (9 - 10.5 GPM)Hydraulic hosesFlow control system valve (only with 16 cc and 27 cc motors)Welded counter bladeRear rollerSelf levelling protection rubberPossibillity to have the rotor equipped with PML hammers or Y-flailsBlank attachment plate
Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice.
from 9 to 23 gal/min Ø 2 in max from 3,5 to 5,5 t
MODELFlow rate(gal/min)
Pressure(PSI)
Excavator weight (t)
Working width
(in)
Weight(Ibs)
Max shredding diameter
(in)
No. teeth type
hammers flails
min max min max min max PML Y
PMM/HY 100 9 10.5 2200 3045 3.5 5.5 40 551 2 16 16
PMM/HY 125 9 10.5 2200 3045 4.0 5.5 50 639 2 20 20
PMM/HY 150 9 10.5 2200 3045 4.5 5.5 59 728 2 24 24
Hammer PML (standard) Flails Y/2 (option)
PR
ICE
LIS
T
Part number Part description Notes Price $
PMM/HY010801100 PMM/HY-100 Light Duty Mulcher for excavator 7,600.00 010801125 PMM/HY-125 Light Duty Mulcher for excavator 8,010.00 010801150 PMM/HY-150 Light Duty Mulcher for excavator 8,407.00
Rotor equippedD108002060-O With "Y" blade PML -
Options500000458-O Customized attachment bracket EX/LIGHT Pin on - Pin graber 2,500.00
D108001780-O Attachment plate with floating system for PML-M/HY 799.00 780000434-O Motor with extension shaft Casappa 27cc. 3-17 GPM 878.00 600000153-O Motor with extension shaft BYPY variable 34/17cc. for EX/LIGHT 9 to 20 GPM 2,997.00 600000479-O Customized setting hydraulic motor BYPY 34/17 -
Spare Parts110822000 Hammer PML 20.30 D108002060 "Y" blade kit PML 20.22 900516162 Hex head set bolt UNI 5737 M16 x 80 10.9 black 1.80 910616001 Nylock lock nut UNI 7473 M16 10 zn 1.21 842125002 Belt XPB Gates Quad Power l=1250 3 belts per unit 51.72 500000458 Customized attachment bracket EX/LIGHT including blank plate and custom made ears 2,800.00
All p
ictu
res
show
n ar
e fo
r illu
stra
tion
purp
ose
only
. Act
ual p
rodu
ct m
ay v
ary
due
to p
rodu
ct e
nhan
cem
ent.
MULCHER WITH HAMMER/FLAIL ROTOR FOR EXCAVATORS.
PML/EX
EXCAVATOR MULCHERS
OPTIONS
38cc gear motor with integrated anticavitation valve - (19.8 - 22.5 GPM)
17/34cc variable manual displacement hydraulic piston motor with relief and anticavitation valve - (9 - 20 GPM)
Customized attachment bracketAttachment plate with self levelling deviceMultiple tooth options
STANDARD EQUIPMENT
Anti dust machine bodyBelt transmission27cc gear motor with integrated anticavitation valve - (9- 17 GPM)Hydraulic hosesFlow control system valve (only with 27 cc and 38 cc motors)Rear hood with mechanic adjustmentWelded counter bladeRear rollerPossibillity to have the rotor equipped with PML hammers or Y-flailsBlank attachment plate
Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice.
from 9 to 22.5 gal/min Ø 2,5 in max from 5,5 to 7,5 t
MODELFlow rate(gal/min)
Pressure(PSI)
Excavator weight (t)
Working width
(in)
Weight(Ibs)
Max shredding diameter
(in)
No. teeth type hammers flails
min max min max min max PML Y
PML/EX 100 9 17 2600 3000 5.5 7.5 40 705 2.5 16 16
PML/EX 125 9 17 2600 3000 6.0 7.5 50 794 2.5 20 20
PML/EX 150 9 17 2600 3000 6.5 7.5 59 882 2.5 24 24
Hammer PML (standard) Flails Y/2 (option)
PR
ICE
LIS
T
Part number Part description Notes Price $
PML/EX010802100 PML/EX-100 Light Duty Mulcher for excavator 9,604.00 010802125 PML/EX-125 Light Duty Mulcher for excavator 10,010.00 010802150 PML/EX-150 Light Duty Mulcher for excavator 10,410.00
Rotor equippedD108002060-O With "Y" blade PML -
Options500000458-O Customized attachment bracket EX/LIGHT Pin on - Pin graber 2,500.00
D108001290-O Attachment plate with floating system for PML/EX 799.00 780000462-O Motor with extension shaft Casappa 38cc. 20 -23 GPM 177.00 600000153-O Motor with extension shaft BYPY variable 34/17cc. for EX/LIGHT 9-20 GPM 2,997.00 600000479-O Customized setting hydraulic motor BYPY 34/17 -
Spare Parts110822000 Hammer PML 20.30 D108002060 "Y" blade kit PML 20.22 900516162 Hex head set bolt UNI 5737 M16 x 80 10.9 black 1.80 910616001 Nylock lock nut UNI 7473 M16 10 zn 1.21 842125002 Belt XPB Gates Quad Power l=1250 3 belts per unit 51.72 500000458 Customized attachment bracket EX/LIGHT including blank plate and custom made ears 2,800.00
All p
ictu
res
show
n ar
e fo
r illu
stra
tion
purp
ose
only
. Act
ual p
rodu
ct m
ay v
ary
due
to p
rodu
ct e
nhan
cem
ent.
UML/HY/RW
EXCAVATOR MULCHERS
FORESTRY MULCHER WITH FIXED TOOTH ROTOR FOR EXCAVATORS OR SPECIAL MACHINES.
STANDARD EQUIPMENT
Anti dust machine bodyBelt transmission
Hydraulic piston motor 63cc with relief and anticavitation valve -(29 - 40 GPM)
Hydraulic rear hoodWelded counter bladeMotor integrated into the frame
OPTIONS
Multiple tooth optionsCustomized attachment bracketBlank attachment plate
Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice.
MODEL
Flow rate(gal/min)
Pressure(PSI)
Excavator weight (t.)
Working width
(in)
Weight (Ibs)
Max shredding diameter
(in)
No. teeth
min max min max min max C/3+C/3/SS I+C/3/SS
UML/HY/RW 125 29 40 3000 3600 6 10 53 1300 5 26+2 36+2
UML/HY/RW 150 29 40 3000 3600 6 10 63 1390 5 32+2 42+2
from 29 to 40 gal/min Ø 5 in max from 6 to 10 t
C/3/HD (option)C/3 (standard) Blade C/3 (option) K (option) I (option) C/3/SS (side scraper)
PR
ICE
LIS
T
Part number Part description Notes Price $
UML/HY/RW012157125 UML/HY/RW-125 Universal forestry mulcher 22,960.00 012157150 UML/HY/RW-150 Universal forestry mulcher 23,310.00
Machine equippedD121175462-O With rotor UML/ST-125 Ø220 type I - hub L 1,454.00 D121175463-O With rotor UML/ST-150 Ø220 type I - hub L 1,586.00
Rotor equipped112800071-O With tooth-blade type C/3 to be multiplied for rotor teeth quantity 31.69 111530018-O With tooth type C/3/HD to be multiplied for rotor teeth quantity 36.96
Options500000459-O Customized attachment bracket UML/EX Pin on - Pin graber 2,900.00 311162000-O Attachment plate for excavator U-FML/HY 497.00
600000480-O Customized setting hydraulic motor BYPY 65/32 -
Spare Parts111530017-K Tooth type C/3 99.00 111530018-K Tooth type C/3/HD 133.40 112800093 Blade adaptor C/3 67.90 112800117 Blade type C/3 29.00 112800082-K Tooth type I Only used on type I rotor 87.90 112800083-K Tooth type K Only used on type I rotor 138.50 112700004-K Side scraper tooth type C/3/SS right 244.50 112700005-K Side scraper tooth type C/3/SS left 244.50 D121175480 C/3 tooth fixing kit (bolt l=120) composed by bolt, washer & nut 9.90 999999137 Bolt C/3 M20 x 1,5 x 120 12.9 black 7.53 921820006 Schnorr anti vibration washer Ø20 HS 4.93 910220102 High hex nut UNI 5587 M20 x 1,5 10 black 1.34 846005715 Belt XPB Gates Quad Power l=1500 4 belts per unit 57.76 D115073000 Chain flap section UMM/EX l=239 98.60 D115072990 Chain flap section UMM/EX l=334 135.10 900716103 Hex head set bolt UNI 5739 M16 x 50 10.9 zn 1.93 920116001 Flat washer UNI 6592 Ø16 zn 0.60 920716006 Spring washer UNI 9195 Ø16 zn 0.80 910616001 Nylock lock nut UNI 7473 M16 10 zn 1.21 500000459 Customized attachment bracket UML/EX including blank plate and custom made ears 3,750.00
All p
ictu
res
show
n ar
e fo
r illu
stra
tion
purp
ose
only
. Act
ual p
rodu
ct m
ay v
ary
due
to p
rodu
ct e
nhan
cem
ent.
FML/HY/RW
EXCAVATOR MULCHERS
FORESTRY MULCHER WITH SWINGING HAMMERS ROTOR FOR EXCAVATORSOR SPECIAL MACHINES.
STANDARD EQUIPMENT
Anti dust machine bodyBelt transmission
Hydraulic piston motor 63cc with relief and anticavitation valve - (29 - 40 GPM)
Hydraulic rear hoodWelded counter bladeMotor integrated into the frame
OPTIONS
Customized attachment bracketBlank attachment plate
Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice.
MODEL
Flow rate(gal/min)
Pressure(PSI)
Excavator weight (t.)
Working width
(in)
Weight (Ibs)
Max shredding diameter
(in)
No. teeth
min max min max min max FML
FML/HY/RW 125 29 40 3000 3600 6 10 53 1215 5 20
FML/HY/RW 150 29 40 3000 3600 6 10 63 1300 5 24
from 29 to 40 gal/min Ø 5 in max from 6 to 10 t
Hammer FML (standard)
PR
ICE
LIS
T
Part number Part description Notes Price $
FML/HY/RW011128125 FML/HY/RW-125 Forestry mulcher 20,710.00 011128150 FML/HY/RW-150 Forestry mulcher 21,020.00
Options500000459-O Customized attachment bracket UML/EX Pin on - Pin graber 2,900.00 311162000-O Attachment plate for excavator U-FML/HY 497.00
600000480-O Customized setting hydraulic motor BYPY 65/32 -
Spare Parts111120000 Hammer FML 33.40 111123125 Hammer retaining shaft Ø25 -125 79.20 111123150 Hammer retaining shaft Ø25 -150 78.15 311126000 Spacer washer hardox FML 45 x 26 x 5 6.81 940100100 Plug M TE BSPP 1" DIN 910 14.62 846005715 Belt XPB Gates Quad Power l=1500 4 belts per unit 57.76 D115073000 Chain flap section UMM/EX l=239 98.60 D115072990 Chain flap section UMM/EX l=334 135.10 900716103 Hex head set bolt UNI 5739 M16 x 50 10.9 zn 1.93 920116001 Flat washer UNI 6592 Ø16 zn 0.60 920716006 Spring washer UNI 9195 Ø16 zn 0.80 910616001 Nylock lock nut UNI 7473 M16 10 zn 1.21
500000459 Customized attachment bracket UML/EX including blank plate and custom made ears 3,750.00
All p
ictu
res
show
n ar
e fo
r illu
stra
tion
purp
ose
only
. Act
ual p
rodu
ct m
ay v
ary
due
to p
rodu
ct e
nhan
cem
ent.
Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice.
MULCHER WITH HAMMER/FLAIL ROTOR FOR EXCAVATORS.
OPTIONS
Customized attachment bracketAttachment plate with self levelling deviceStronger bearing for back rollerMultiple tooth options
PMM/EX
EXCAVATOR MULCHERS
STANDARD EQUIPMENT
Anti dust machine bodyBelt transmission
32/65cc variable manual displacement hydraulic piston motor with relief and anticavitation valve - (16 - 35 GPM)
Flow control system valveRear hood with mechanical adjustmentAdjustable skidsWelded counter bladeRear rollerPossibillity to have the rotor equipped with PML hammers or Y-flails Blank attachment plate
from 16 to 35 gal/min Ø 3 in max from 6 to 13 t
MODELFlow rate(gal/min)
Pressure(PSI)
Excavator weight (t)
Working width
(in)
Weight(Ibs)
Max shredding diameter
(in)
No. teeth typehammers flails
min max min max min max PMM Y
PMM/EX 100 16 35 2600 3600 6 13 42 1147 3 12 12
PMM/EX 125 16 35 2600 3600 6 13 51 1323 3 16 16
PMM/EX 150 16 35 2600 3600 6 13 61 1499 3 18 18
PMM/EX 175 16 35 2600 3600 7 13 70 1676 3 22 22
Hammer PMM (standard) Hammer Y/3 (option)
PR
ICE
LIS
T
Part number Part description Notes Price $
PMM/EX011004100 PMM/EX-100 Light Duty Mulcher for excavator 17,260.00 011004125 PMM/EX-125 Light Duty Mulcher for excavator 17,670.00 011004150 PMM/EX-150 Light Duty Mulcher for excavator 18,090.00 011004175 PMM/EX-175 Light Duty Mulcher for excavator 18,500.00
Rotor equipped111024000-O With "Y" blade PMM -
Options500000458-O Customized attachment bracket EX/LIGHT Pin on - Pin graber 2,060.00
600300005-O Heavy duty roller support PMM 607.00 600000480-O Customized setting hydraulic motor BYPY 65/32 -
Spare Parts111023000 Hammer PMM 33.40 111024000 "Y" blades kit PMM with washers 36.11
900418202 " Hex head set bolt UNI 5712 M18 x 100 10.9 black ( wrench 30 mm) " 7.97
910618001 Nylock lock nut UNI 7473 M18 10 zn 3.71 846005514 Belt XPB Gates Quad Power l=1450 4 belts per unit 58.92
500000458 Customized attachment bracket EX/LIGHT including blank plate and custom made ears 2,800.00
All p
ictu
res
show
n ar
e fo
r illu
stra
tion
purp
ose
only
. Act
ual p
rodu
ct m
ay v
ary
due
to p
rodu
ct e
nhan
cem
ent.
FORESTRY MULCHER WITH FIXED TOOTH ROTOR FOR EXCAVATORS.
DML/HY - DML/HY/VT
STANDARD EQUIPMENT
Anti dust machine bodyBelt transmission
17/34cc variable manual displacement hydraulic piston motor with relief and anticavitation valve (DML/HY) - (13 - 30 GPM)
Safety and anticavitation valve (DML/HY)
55/38cc variable torque hydraulic piston motor (DML/HY/VT) - (24 - 30 GPM)
Flow control system valveFront hood with mechanical adjustmentRear hood with mechanical adjustmentWelded counter bladeProtection chainsMotor integrated into the frame
OPTIONS
32/65cc variable manual displacement hydraulic piston motor with relief and anticavitation valve (DML/HY) - (24 - 53 GPM)
Customized setting hydraulic motor (DML/HY/VT)Hydraulic rear hoodHydraulic front hoodDiverter valve (plug & play) + ext. wiringCustomized attachment bracketCustomized attachment bracket with extended-heelMultiple tooth options
EXCAVATOR MULCHERS
Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice.*Variable displacement hydraulic motor.
from 13 to 53 gal/min Ø 5 in max from 5 to 13 t
MODELFlow rate(gal/min)
Pressure(PSI)
Excavator weight (t) Working width
(in)Weight
(Ibs)
Max shredding diameter
(in)
No. bladestype E
min max min max min max
DML/HY 75 13 30 2600 3600 5 13 31 1036 5 20
DML/HY 100 13 30 2600 3600 5 13 39 1080 5 24
DML/HY 125 13 30 2600 3600 5 13 49 1125 5 30
DML/HY/VT 75* 24 30 2600 5000 5 13 31 1036 5 20
DML/HY/VT 100* 24 30 2600 5000 5 13 39 1080 5 24
DML/HY/VT 125* 24 30 2600 5000 5 13 49 1125 5 30
Blade E (standard) Blade E/HD (option)
Supporting service legBlank attachment plate
PR
ICE
LIS
T
Part number Part description Notes Price $
DML/HY013200080 DML/HY-075 Universal mulcher for excavator 19,860.00 013200100 DML/HY-100 Universal mulcher for excavator 20,600.00 013200125 DML/HY-125 Universal mulcher for excavator 21,230.00
DML/HY/VT013206080 DML/HY-075 VT Universal mulcher for excavator 22,070.00 013206100 DML/HY-100 VT Universal mulcher for excavator 22,910.00 013206125 DML/HY-125 VT Universal mulcher for excavator 23,540.00
Options500000458-O Customized attachment bracket EX/LIGHT Pin on - Pin graber 2,500.00
112800081-O With blade type E/HD 22.41 600000175-O Hydraulic cylinder for rear hood DML/HY Pos.1 486.00 600000176-O Hydraulic cylinder for front hood DML/HY Pos.2 486.00 600000180-O Hydraulic drive for rear hood with diverter valve 12V DML/HY Including above pos.1 1,116.00 600000181-O Hydraulic drive for front and rear hood with diverter valve 12V DML/HY Including above pos.1 and pos.2 1,867.00 600000194-O Hydraulic drive for rear hood with diverter valve 24V Including above pos.1 1,116.00 600000195-O Hydraulic drive for front and rear hood with diverter valve 24V Including above pos.1 and pos.2 1,867.00 400000012-O Extension wiring diverter valve l=10m 129.00 600000447-O Motor with extension shaft BYPY variable 65/32cc. for DML/HY mech.variable displacement motor 737.00 600000479-O Customized setting hydraulic motor BYPY 34/17 - 600000480-O Customized setting hydraulic motor BYPY 65/32 - 600000442-O Customized setting hydraulic motor Rexroth variable 55 for DML/HY to optimize the mulcher performance
Spare Parts112800098 Blade type E 60.80 112800081 Blade type E/HD 81.90 901214062 Hex socket head cap bolt UNI 5932 M14 x 1,5 x 30 12.9 black 4.35 846005514 Belt XPB Gates Quad Power l=1450 4 belts per unit 58.92
500000458 Customized attachment bracket EX/LIGHT including blank plate and custom made ears 2,800.00
All p
ictu
res
show
n ar
e fo
r illu
stra
tion
purp
ose
only
. Act
ual p
rodu
ct m
ay v
ary
due
to p
rodu
ct e
nhan
cem
ent.
FORESTRY MULCHER WITH FIXED TOOTH ROTOR FOR EXCAVATORS.
UML/HY - UML/HY/VT
EXCAVATOR MULCHERS
STANDARD EQUIPMENT
Anti dust machine bodyBelt transmission
32/65cc variable manual displacement hydraulic piston motor with relief and anticavitation valve (UML/HY) - (19 - 42 GPM)
80/50cc variable torque hydraulic piston motor (UML/HY/VT) - (26 - 42 GPM)
Flow control system valveHydraulic rear hoodWelded counter bladeDouble line protection chainsMotor integrated into the frameBlank attachment plate
OPTIONS
Customized setting hydraulic motor (UML/HY/VT)Rear hood with mechanical adjustmentDiverter valve (plug & play) + ext. wiringCustomized attachment bracketCustomized attachment bracket with extended-heelMultiple tooth optionsWith rotor Bite Limiter (UML/HY/VT)
Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice.*Variable displacement hydraulic motor.
from 19 to 53 gal/min Ø 6 in max from 7 to 15 t
MODELLO
Flow rate(gal/min)
Pressure (PSI)Excavatorweight (t.)
Working width
(in)
Weight(Ibs)
Max shredding diameter
(in)
No. teeth/hammers type
min max min max min max C/3+C/3/SS I+C/3/SS
UML/HY 100 19 42 2600 3620 7 15 44 1918 6 20+2 28+2
UML/HY 125 19 42 2600 3620 7 15 53 2138 6 26+2 36+2
UML/HY 150 19 42 2600 3620 7 15 62 2359 6 32+2 42+2
UML/HY/VT 100* 26 42 2600 5070 7 15 44 1920 6 20+2 28+2
UML/HY/VT 125* 26 42 2600 5070 7 15 53 2138 6 26+2 36+2
UML/HY/VT 150* 26 42 2600 5070 7 15 62 2359 6 32+2 42+2
C/3/HD (option)C/3 (standard) Blade C/3 (option) K (option) I (option) C/3/SS (side scraper)
PR
ICE
LIS
T
Part number Part description Notes Price $
UML/HY012116100 UML/HY-100 Universal forestry mulcher for excavator 24,690.00 012116125 UML/HY-125 Universal forestry mulcher for excavator 25,640.00 012116150 UML/HY-150 Universal forestry mulcher for excavator 26,690.00
UML/HY/VT012150100 UML/HY-100 VT Universal forestry mulcher for excavator 28,370.00 012150125 UML/HY-125 VT Universal forestry mulcher for excavator 28,900.00 012150150 UML/HY-150 VT Universal forestry mulcher for excavator 30,270.00
Machine equippedD121175461-O With rotor UML/ST-100 Ø220 type I - hub L 1,278.00 D121175462-O With rotor UML/ST-125 Ø220 type I - hub L 1,454.00 D121175463-O With rotor UML/ST-150 Ø220 type I - hub L 1,586.00
Machine equippedD121177771-O With rotor UML/ST-100 Ø220 Bite Limiter - hub L only for mulchers with VT motor 902.00 D121177772-O With rotor UML/ST-125 Ø220 Bite Limiter - hub L only for mulchers with VT motor 1,038.00 D121177773-O With rotor UML/ST-150 Ø220 Bite Limiter - hub L only for mulchers with VT motor 1,242.00
Rotor equipped112800071-O With tooth-blade type C/3 to be multiplied for rotor teeth quantity 31.69 111530018-O With tooth type C/3/HD to be multiplied for rotor teeth quantity 36.96 112800083-O With tooth type K to be multiplied for rotor teeth quantity 26.52
Options500000459-O Customized attachment bracket UML/EX Pin on - Pin graber 2,900.00
600000177-O Mechanical cylinder for U-FML/HY hood - 600000417-O Kit diverter valve 12V for U-FML/HY 885.00 600000418-O Kit diverter valve 24V for U-FML/HY 917.00 400000012-O Extension wiring diverter valve l=10m 129.00 600000480-O Customized setting hydraulic motor BYPY 65/32 - 600000349-O Customized setting hydraulic motor Danfoss variable H1 80 -
Spare Parts111530017-K Tooth type C/3 99.00 111530018-K Tooth type C/3/HD 133.40 112800093 Blade adaptor C/3 67.90 112800117 Blade type C/3 29.00 112800082-K Tooth type I Only used on type I rotor 87.90 112800083-K Tooth type K Only used on type I rotor 138.50 112700004-K Side scraper tooth type C/3/SS right 244.50 112700005-K Side scraper tooth type C/3/SS left 244.50 D121175480 C/3 tooth fixing kit (bolt l=120) composed by bolt, washer & nut 9.90 999999137 Bolt C/3 M20 x 1,5 x 120 12.9 black 7.53 921820006 Schnorr anti vibration washer Ø20 HS 4.93 910220102 High hex nut UNI 5587 M20 x 1,5 10 black 1.34 842159001 Belt XPB Gates Quad Power l=1590 for UML/HY - 5 belts per unit 51.50 891000446 Belt Poly-chain 14M-37 carbon volt l=1568 for UML/HY/VT - 1 belt per unit 479.00 500000459 Customized attachment bracket UML/EX including blank plate and custom made ears 3,750.00
All p
ictu
res
show
n ar
e fo
r illu
stra
tion
purp
ose
only
. Act
ual p
rodu
ct m
ay v
ary
due
to p
rodu
ct e
nhan
cem
ent.
FML/HY
Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice.
FORESTRY MULCHER WITH SWINGING HAMMER ROTOR FOR EXCAVATORS.
STANDARD EQUIPMENT
Anti dust machine bodyBelt transmission
32/65cc variable manual displacement hydraulic piston motor with relief and anticavitation valve - (19 - 42 GPM)
Flow control system valveHydraulic rear hoodWelded counter bladeProtection chainsMotor integrated into the frameBlank attachment plate
OPTIONS
Rear hood with mechanical adjustmentDiverter valve (plug & play) + ext. wiringCustomized attachment bracketCustomized attachment bracket with extended-heel
EXCAVATOR MULCHERS
MODELLO
Flow rate(gal/min)
Pressure (PSI)Excavatorweight (t.)
Working width
(in)
Weight(Ibs)
Max shredding diameter
(in)
No. teeth/hammers type
min max min max min max FML
FML/HY 100 19 42 2600 3620 7 15 44 1830 6 16
FML/HY 125 19 42 2600 3620 7 15 53 2050 6 20
FML/HY 150 19 42 2600 3620 7 15 62 2270 6 24
from 19 to 42 gal/min Ø 6 in max from 7 to 15 t
Hammer FML (standard)
PR
ICE
LIS
T
Part number Part description Notes Price $
FML/HY011103100 FML/HY-100 Forestry mulcher for excavator 22,590.00 011103125 FML/HY-125 Forestry mulcher for excavator 23,540.00 011103150 FML/HY-150 Forestry mulcher for excavator 24,490.00
Options500000459-O Customized attachment bracket UML/EX Pin on - Pin graber 2,900.00
600000177-O Mechanical cylinder for U-FML/HY hood - 600000417-O Kit diverter valve 12V for U-FML/HY 885.00 600000418-O Kit diverter valve 24V for U-FML/HY 917.00 400000012-O Extension wiring diverter valve l=10m 129.00 600000480-O Customized setting hydraulic motor BYPY 65/32 -
Spare Parts111120000 Hammer FML 33.40 111123100 Hammer retaining shaft Ø25 -100 68.80 111123125 Hammer retaining shaft Ø25 -125 79.20 111123150 Hammer retaining shaft Ø25 -150 78.15 311126000 Spacer washer hardox FML 45 x 26 x 5 6.81 940100100 Plug M TE BSPP 1" DIN 910 14.62 842159001 Belt XPB Gates Quad Power l=1590 5 belts per unit 51.50 500000459 Customized attachment bracket UML/EX including blank plate and custom made ears 3,750.00
All p
ictu
res
show
n ar
e fo
r illu
stra
tion
purp
ose
only
. Act
ual p
rodu
ct m
ay v
ary
due
to p
rodu
ct e
nhan
cem
ent.
FORESTRY MULCHER WITH FIXED TOOTH ROTOR FOR EXCAVATORS.
UML/EX - UML/EX/VT
STANDARD EQUIPMENT
Anti dust machine bodyBelt transmission
Hydraulic piston motor 63cc with relief and anticavitation valve(UML/EX) - (30 - 40 GPM)
110/60cc variable torque hydraulic piston motor (UML/EX/VT) - (32 - 48 GPM)
Flow control system valveHydraulic rear hoodWelded counter bladeBolted double line protection chains
OPTIONS
Customized setting hydraulic motor (UML/EX/VT)Diverter valve (plug & play) + ext. wiringCustomized attachment bracketCustomized attachment bracket with extended-heelMultiple tooth optionsWith rotor Bite Limiter (UML/EX/VT)
EXCAVATOR MULCHERS
Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice.*Variable displacement hydraulic motor.
Blank attachment plateAnty-dust rear hoodMotor integrated into the frame
from 30 to 48 gal/min Ø 8 in max from 14 to 20 t
MODEL
Flow rate(gal/min)
Pressure (PSI)Excavatorweight (t.)
Working width
(in)
Weight (Ibs)
Max shredding diameter
(in)
No. teeth/hammers type
min max min max min max C/3+C/3/SS I+C/3/SS
UML/EX 100 30 40 3000 5000 14 20 43 2238 8 20+2 28+2
UML/EX 125 30 40 3000 5000 14 20 53 2370 8 26+2 36+2
UML/EX 150 30 40 3000 5000 14 20 62 2712 8 32+2 42+2
UML/EX/VT 100* 32 48 3000 5000 14 20 43 2403 8 20+2 28+2
UML/EX/VT 125* 32 48 3200 5000 14 20 53 2579 8 26+2 36+2
UML/EX/VT 150* 32 48 3200 5000 14 20 62 2822 8 32+2 42+2
C/3/HD (option)C/3 (standard) Blade C/3 (option) K (option) I (option) C/3/SS (side scraper)
PR
ICE
LIS
T
Part number Part description Notes Price $
UML/EX012103100 UML/EX-100 Universal forestry mulcher for excavator 32,010.00 012103125 UML/EX-125 Universal forestry mulcher for excavator 33,280.00 012103150 UML/EX-150 Universal forestry mulcher for excavator 34,490.00
UML/EX/VT012138100 UML/EX-100 VT Universal forestry mulcher for excavator 38,660.00 012138125 UML/EX-125 VT Universal forestry mulcher for excavator 39,760.00 012138150 UML/EX-150 VT Universal forestry mulcher for excavator 40,960.00
Machine equippedD121175451-O With rotor UML/ST-100 Ø220 type I 1,278.00 D121175452-O With rotor UML/ST-125 Ø220 type I 1,454.00 D121175453-O With rotor UML/ST-150 Ø220 type I 1,586.00
Machine equippedD121175221-O With rotor UML/ST-100 Ø220 Bite Limiter only for mulchers with VT motor 902.00 D121175222-O With rotor UML/ST-125 Ø220 Bite Limiter only for mulchers with VT motor 1,038.00 D121175223-O With rotor UML/ST-150 Ø220 Bite Limiter only for mulchers with VT motor 1,242.00
Rotor equipped112800071-O With tooth-blade type C/3 to be multiplied for rotor teeth quantity 31.69 111530018-O With tooth type C/3/HD to be multiplied for rotor teeth quantity 36.96 112800083-O With tooth type K to be multiplied for rotor teeth quantity 26.52
Options500000459-O Customized attachment bracket UML/EX Pin on - Pin graber 2,900.00 500000462-O Customized attachment bracket quick coupler style special order quick coupler 2,163.00 600000419-O Kit diverter valve 12V for U-FML/EX 885.00 600000420-O Kit diverter valve 24V for U-FML/EX 885.00 400000012-O Extension wiring diverter valve l=10m 10 mt. length 129.00 600000336-O Customized setting hydraulic motor Danfoss variable H1 110 to optimize the mulcher performance -
Spare Parts111530017-K Tooth type C/3 99.00 111530018-K Tooth type C/3/HD 133.40 112800093 Blade adaptor C/3 67.90 112800117 Blade type C/3 29.00 112800082-K Tooth type I Only used on type I rotor 87.90 112800083-K Tooth type K Only used on type I rotor 138.50 112700004-K Side scraper tooth type C/3/SS right 244.50 112700005-K Side scraper tooth type C/3/SS left 244.50 D121175480 C/3 tooth fixing kit (bolt l=120) composed by bolt, washer & nut 9.90 999999137 Bolt C/3 M20 x 1,5 x 120 12.9 black 7.53 921820006 Schnorr anti vibration washer Ø20 HS 4.93 910220102 High hex nut UNI 5587 M20 x 1,5 10 black 1.34 846005715 Belt XPB Gates Quad Power l=1500 belt for UML/EX - 5 belts per unit 57.76 891000447 Belt Poly-chain 14M-68 carbon volt l=1568 belt for UML/EX/VT - 1 belt per unit 1,029.00 D143000590 Chain flap section 28 - 6 links l=239 124.00 D143000570 Chain flap section 28 - 6 links l=334 138.80 900516121 Hex head set bolt UNI 5737 M16 x 60 10.9 zn 2.00 920716006 Spring washer UNI 9195 Ø16 zn 0.80 500000459 Customized attachment bracket UML/EX including blank plate and custom made ears 3,750.00
MODEL
Flow rate(gal/min)
Pressure (PSI)Excavatorweight (t.)
Working width
(in)
Weight (Ibs)
Max shredding diameter
(in)
No. teeth/hammers type
min max min max min max C/3+C/3/SS I+C/3/SS
UML/EX 100 30 40 3000 5000 14 20 43 2238 8 20+2 28+2
UML/EX 125 30 40 3000 5000 14 20 53 2370 8 26+2 36+2
UML/EX 150 30 40 3000 5000 14 20 62 2712 8 32+2 42+2
UML/EX/VT 100* 32 48 3000 5000 14 20 43 2403 8 20+2 28+2
UML/EX/VT 125* 32 48 3200 5000 14 20 53 2579 8 26+2 36+2
UML/EX/VT 150* 32 48 3200 5000 14 20 62 2822 8 32+2 42+2
All p
ictu
res
show
n ar
e fo
r illu
stra
tion
purp
ose
only
. Act
ual p
rodu
ct m
ay v
ary
due
to p
rodu
ct e
nhan
cem
ent.
Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice.
FORESTRY MULCHER WITH SWINGING HAMMER ROTOR FOR EXCAVATORS.
OPTIONS
Diverter valve (plug & play) + ext. wiringCustomized attachment bracket Customized attachment bracket with extended-heel
FML/EX
STANDARD EQUIPMENT
Anti dust machine bodyBelt transmission
Hydraulic piston motor 63cc with relief and anticavitation valve - (30 - 40 GPM)
Flow control system valveHydraulic rear hoodWelded counter bladeBolted double line protection chainsAnty-dust rear hoodMotor integrated into the frameSupporting service legBlank attachment plate
EXCAVATOR MULCHERS
from 30 to 40 gal/min Ø 8 in max from 14 to 20 t
MODEL
Flow rate(gal/min)
Pressure (PSI)Excavatorweight (t.)
Working width
(in)
Weight (Ibs)
Max shredding diameter
(in)
No. teeth/hammers type
min max min max min max FMM
FML/EX 100 30 40 3200 5000 14 20 43 1100 8 16
FML/EX 125 30 40 3200 5000 14 20 53 1340 8 20
FML/EX 150 30 40 3200 5000 14 20 62 1580 8 24
Hammer FMM (standard)
PR
ICE
LIS
T
Part number Part description Notes Price $
FML/EX011102100 FML/EX-100 Forestry mulcher for excavator 28,170.00 011102125 FML/EX-125 Forestry mulcher for excavator 29,320.00 011102150 FML/EX-150 Forestry mulcher for excavator 30,060.00
Options500000459-O Customized attachment bracket UML/EX Pin on - Pin graber 2,900.00
600000419-O Kit diverter valve 12V for U-FML/EX 885.00 600000420-O Kit diverter valve 24V for U-FML/EX 885.00 400000012-O Extension wiring diverter valve l=10m 129.00
Spare Parts111220000 Hammer FMM 37.50 111111100 Hammer retaining shaft Ø30 -100 127.00 111111125 Hammer retaining shaft Ø30 -125 139.00 111111150 Hammer retaining shaft Ø30 -150 155.00 940100100 Plug M TE BSPP 1" DIN 910 14.62 846005715 Belt XPB Gates Quad Power l=1500 57.76 D143000590 Chain flap section 28 - 6 links l=239 124.00 D143000570 Chain flap section 28 - 6 links l=334 138.80 900516121 Hex head set bolt UNI 5737 M16 x 60 10.9 zn 2.00 920716006 Spring washer UNI 9195 Ø16 zn 0.80 500000459 Customized attachment bracket UML/EX including blank plate and custom made ears 3,750.00
All p
ictu
res
show
n ar
e fo
r illu
stra
tion
purp
ose
only
. Act
ual p
rodu
ct m
ay v
ary
due
to p
rodu
ct e
nhan
cem
ent.
FORESTRY MULCHER WITH FIXED TOOTH ROTOR FOR EXCAVATORS.
UML/S/EX/VT
STANDARD EQUIPMENT
Anti dust machine bodyBelt transmission110/60cc variable torque hydraulic piston motor - (40 - 53 GPM)Flow control system valveHydraulic rear hoodInterchangeable counter bladesBolted double line protection chainsAnty-dust rear hoodMotor integrated into the frameBlank attachment plate
OPTIONS
160/115cc variable torque hydraulic piston motor - (40 - 79 GPM)Customized setting hydraulic motorDiverter valve (plug & play) + ext. wiringAdditional reinforced side platesCustomized attachment bracketCustomized attachment bracket with extended-heelMultiple tooth optionsWith rotor Bite Limiter (UML/S/EX/VT)
EXCAVATOR MULCHERS
Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice.
from 40 to 79 gal/min Ø 12 in max from 18 to 25 t
MODELFlow rate(gal/min)
Pressure(PSI)
Excavatorweight (t)
Working width
(in)
Weight (Ibs)
Max shredding diameter
(in)
No. teeth type
min max min max min max C/3+C/3/SS I+C/3/SS
UML/S/EX/VT 125 40 53 3000 5000 18 25 53 3197 10 26+4 36+2
UML/S/EX/VT 150 40 53 3000 5000 18 25 62 3417 10 32+4 42+2
C/3/HD (option)C/3 (standard) Blade C/3 (option) K (option) I (option) C/3/SS (side scraper)
PR
ICE
LIS
T
Part number Part description Notes Price $
UML/S/EX/VT014300125 UML/S/EX-125 VT Universal forestry mulcher for excavator 43,500.00 014300150 UML/S/EX-150 VT Universal forestry mulcher for excavator 44,770.00
Machine equippedD143002432-O With rotor UML/S/ST-125 type I HS 1,446.00 D143002433-O With rotor UML/S/ST-150 type I HS 1,794.00
Machine equippedD143000632-O With rotor UML/S/ST-125 Bite Limiter - D143000633-O With rotor UML/S/ST-150 Bite Limiter -
Rotor equipped112800071-O With tooth-blade type C/3 to be multiplied for rotor teeth quantity 31.69 111530018-O With tooth type C/3/HD to be multiplied for rotor teeth quantity 36.96 112800083-O With tooth type K to be multiplied for rotor teeth quantity 26.52
Options500000459-O Customized attachment bracket UML/EX Pin on - Pin graber 2,900.00
600000471-O Motor with extension shaft Danfoss variable H1 160/108cc. for UML/S/EX VT 54-79 GPM 1,743.00
600000419-O Kit diverter valve 12V for U-FML/EX 885.00 600000420-O Kit diverter valve 24V for U-FML/EX 885.00 400000012-O Extension wiring diverter valve l=10m 10 mt. length 129.00 D143000530-O Side reinforcement kit for UML/S/EX 782.00 600000336-O Customized setting hydraulic motor Danfoss variable H1 110 to optimize the mulcher performance - 600000369-O Customized setting hydraulic motor Danfoss variable H1 160 to optimize the mulcher performance -
Spare Parts111530017-K Tooth type C/3 99.00 111530018-K Tooth type C/3/HD 133.40 112800093 Blade adaptor C/3 67.90 112800117 Blade type C/3 29.00 112800082-K Tooth type I Only used on type I rotor 87.90 112800083-K Tooth type K Only used on type I rotor 138.50 112700004-K Side scraper tooth type C/3/SS right 244.50 112700005-K Side scraper tooth type C/3/SS left 244.50 D121174200 C/3 tooth fixing kit (bolt l=130) composed by bolt, washer & nut 9.90 999999137 Bolt C/3 M20 x 1,5 x 120 12.9 black 7.53 921820006 Schnorr anti vibration washer Ø20 HS 4.93 910220102 High hex nut UNI 5587 M20 x 1,5 10 black 1.34 891000448 Belt Poly-chain 14M-68 carbon volt l=1750 1 belt per unit 1,070.00 D143000590 Chain flap section 28 - 6 links l=239 124.00 D143000570 Chain flap section 28 - 6 links l=334 138.80 900516121 Hex head set bolt UNI 5737 M16 x 60 10.9 zn 2.00 920716006 Spring washer UNI 9195 Ø16 zn 0.80 500000459 Customized attachment bracket UML/EX including blank plate and custom made ears 3,750.00
All p
ictu
res
show
n ar
e fo
r illu
stra
tion
purp
ose
only
. Act
ual p
rodu
ct m
ay v
ary
due
to p
rodu
ct e
nhan
cem
ent.
FORESTRY MULCHER WITH FIXED TOOTH ROTOR FOR EXCAVATORS.
UMM/EX - UMM/EX/VT
Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice.*Variable displacement hydraulic motor.
EXCAVATOR MULCHERS
MODELFlow rate(gal/min)
Pressure(PSI)
Excavatorweight (t)
Working width
(in)
Weight (Ibs)
Max shredding diameter
(in)
No. teeth type
min max min max min max C/3+C/3/SS I+C/3/SS
UMM/EX 125 34 48 3500 5000 20 30 53 4145 12 26+2 38+2
UMM/EX 150 34 48 3500 5000 20 30 62 4321 12 32+2 46+2
UMM/EX/VT 125* 34 58 3500 5000 20 30 53 4299 12 26+2 38+2
UMM/EX/VT 150* 34 58 3500 5000 20 30 62 4586 12 32+2 46+2
from 34 to 79 gal/min Ø 12 in max from 20 to 30 t
C/3/HD (option)C/3 (standard) Blade C/3 (option) K (option) I (option) C/3/SS (side scraper)
STANDARD EQUIPMENT
Anti dust machine bodyBelt transmission
Hydraulic piston motor 63cc with relief and anticavitation valve (UMM/EX) - (34 -48 GPM)
110/60cc variable torque hydraulic piston motor (UMM/EX/VT) - (34 -58 GPM)
Flow control system valve (flow control)Hydraulic rear hoodInterchangeable counter bladesMotor integrated into the frameBolted double line protection chainsSupporting service leg
OPTIONS
Hydraulic piston motor 90cc with relief and anticavitation valve(UMM/EX) - (34 -63 GPM)
160/115cc variable torque hydraulic piston motor (UMM/EX/VT) - (34 - 79 GPM)
Customized setting hydraulic motor (UMM/EX/VT)Diverter valve (plug in and play) + ext. wiringAdditional reinforced side platesCustomized attachment bracketCustomized attachment bracket with fixed thumbMultiple tooth options
PR
ICE
LIS
T
Part number Part description Notes Price $
UMM/EX011512125 UMM/EX-125 Universal forestry mulcher for excavator * 46,220.00 011512150 UMM/EX-150 Universal forestry mulcher for excavator * 48,350.00
UMM/EX/VT011513125 UMM/EX-125 VT Universal forestry mulcher for excavator 52,180.00 011513150 UMM/EX-150 VT Universal forestry mulcher for excavator 54,080.00
Machine equippedD115072412-O With rotor UMM/S/DT-125 Ø500 type I - hub Ø60 2,201.00 D115072413-O With rotor UMM/S/DT-150 Ø500 type I - hub Ø60 2,553.00
Rotor equipped112800071-O With tooth-blade type C/3 to be multiplied for rotor teeth quantity 31.69 111530018-O With tooth type C/3/HD to be multiplied for rotor teeth quantity 36.96 112800083-O With tooth type K to be multiplied for rotor teeth quantity 26.52
Options500000460-O Customized attachment bracket UMM/EX Pin on - Pin graber 3,000.00
600000345-O Motor with extension shaft Danfoss variable H1 160/108cc. for UMM/EX Surcharge only for UMM EX VT 1,726.00
600000421-O Kit diverter valve 12V for UMM/EX 885.00 600000422-O Kit diverter valve 24V for UMM/EX 885.00 400000012-O Extension wiring diverter valve l=10m 10 mt. length 129.00 D115073050-O Side reinforcement kit for UMM/EX 798.00 600000336-O Customized setting hydraulic motor Danfoss variable H1 110 to optimize the mulcher performance - 600000369-O Customized setting hydraulic motor Danfoss variable H1 160 to optimize the mulcher performance -
Spare Parts111530017-K Tooth type C/3 99.00 111530018-K Tooth type C/3/HD 133.40 112800093 Blade adaptor C/3 67.90 112800117 Blade type C/3 29.00 112800082-K Tooth type I Only used on type I rotor 87.90 112800083-K Tooth type K Only used on type I rotor 138.50 112700004-K Side scraper tooth type C/3/SS right 244.50 112700005-K Side scraper tooth type C/3/SS left 244.50 D121174200 C/3 tooth fixing kit (bolt l=130) composed by bolt, washer & nut 9.90 999999100 Bolt C/3 M20 x 1,5 x 130 12.9 black 8.13 921820006 Schnorr anti vibration washer Ø20 HS 4.93 910220102 High hex nut UNI 5587 M20 x 1,5 10 black 1.34 842165002 Belt XPB Gates Quad Power l=1650 belt for UMM/EX - 5 belts per unit 63.37 891000448 Belt Poly-chain 14M-68 carbon volt l=1750 belt for UMM/EX/VT - 1 belt per unit 1,070.00 D143000590 Chain flap section 28 - 6 links l=239 124.00 D143000570 Chain flap section 28 - 6 links l=334 138.80 900516121 Hex head set bolt UNI 5737 M16 x 60 10.9 zn 2.00 920716006 Spring washer UNI 9195 Ø16 zn 0.80 500000460 Customized attachment bracket UMM/EX including blank plate and custom made ears 4,400.00
* with 90 cc hy motor
All p
ictu
res
show
n ar
e fo
r illu
stra
tion
purp
ose
only
. Act
ual p
rodu
ct m
ay v
ary
due
to p
rodu
ct e
nhan
cem
ent.
DISC STUMP CUTTERS FOR EXCAVATORS.
SCL/EX/VT
STANDARD EQUIPMENT
Anti dust machine bodyBelt transmission110/60cc variable torque hydraulic piston motor - (26 -42 GPM)Flow control system valveHydraulic front hoodMotor integrated into the frameBolted protection chainsAdjustable supporting service standBlank attachment plateBolted on protection chains
OPTIONS
Motor with extension shaft Sauer variable H1 80/50 (18 -32 GPM)Customized setting hydraulic motorDiverter valve (plug & play) + ext. wiringCustomized attachment bracket (without pins)Customized attachment bracket with extended heel (without pins)Front fixed heel
EXCAVATOR STUMP CUTTERS
Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice.
L 1 (standard) L 4 (standard)L 3 (standard) L 2 (standard)
from 26 to 42 gal/min from 7 to 15 t
MODELFlow rate(gal/min)
Pressure(PSI)
Excavatorweight (t)
Rotor diameter
(in)
Total width(in)
Weight(Ibs)
No. teeth typeL1/L2/L3/L4
min max min max min max
SCL/EX/VT 26 42 2600 5000 7 15 26 27 1664 12+3+12+3
PR
ICE
LIS
T
Part number Part description Notes Price $
SCL/EX/VT014600000 SCL/EX VT Stump cutter for excavator 28,190.00
Options
D146000630-O Heel for SCL/EX cpl 853.00 600000419-O Kit diverter valve 12V for U-FML/EX 885.00 600000420-O Kit diverter valve 24V for U-FML/EX 885.00
600000474-O Customized setting hydraulic motor Danfoss variable H1 80 for SCL/EX -
400000012-O Extension wiring diverter valve l=10m 129.00
600000429-O Customized setting hydraulic motor Danfoss variable H1 110 for SCL/EX -
Spare Parts
891000448 Belt Poly-chain 14M-68 carbon volt l=1750 1 belt per unit 1,070.00 D143000590 Chain flap section 28 - 6 links l=239 124.00 900716103 Hex head set bolt UNI 5739 M16 x 50 10.9 zn 1.93 920116001 Flat washer UNI 6592 Ø16 zn 0.60 920716006 Spring washer UNI 9195 Ø16 zn 0.80 910616001 Nylock lock nut UNI 7473 M16 10 zn 1.21500000462 Customized attachment bracket quick coupler style including blank plate and custom made ears 2,500.00
All p
ictu
res
show
n ar
e fo
r illu
stra
tion
purp
ose
only
. Act
ual p
rodu
ct m
ay v
ary
due
to p
rodu
ct e
nhan
cem
ent.
DISC STUMP CUTTERS FOR EXCAVATORS.
SCM/EX/VT
STANDARD EQUIPMENT
Anti dust machine bodyBelt transmission160/115cc variable torque hydraulic piston motor (40 -58 GPM)Flow control system valveHydraulic front hoodMotor integrated into the frameBolted protection chainsAdjustable supporting service standBlank attachment plateBolted on protection chains
OPTIONS
Customized setting hydraulic motorDiverter valve (plug & play) + ext. wiringCustomized attachment bracket (without pins)Customized attachment bracket with extended heel (without pins)Front fixed heel
EXCAVATOR STUMP CUTTERS
Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice.
from 40 to 58 gal/min from 14 to 20 t
MODELFlow rate(gal/min)
Pressure(PSI)
Excavatorweight (t)
Rotor diameter
(in)
Total width(in)
Weight(Ibs)
No. teeth typeM1/M2/M3/M4
min max min max min max
SCM/EX/VT 40 58 3200 5000 14 20 31 30 2425 12+3+12+3
M 1 (standard) M 4 (standard)M 3 (standard) M 2 (standard)
PR
ICE
LIS
T
Part number Part description Notes Price $
SCM/EX/VT013800028 SCM/EX VT Stump cutter for excavator 40,350.00
Options500000461-O Customized attachment bracket SCM/EX 3,100.00
600000700-O Heel for SCM/EX cpl 881.00 600000419-O Kit diverter valve 12V for U-FML/EX 885.00 600000420-O Kit diverter valve 24V for U-FML/EX 885.00 400000012-O Extension wiring diverter valve l=10m 129.00
600000431-O Customized setting hydraulic motor Danfoss variable H1 160 for SCM/EX -
Spare Parts
891000449 Belt Poly-chain 14M-68 carbon volt l=1890 1 belt per unit 1,090.00 D138000300 Central chain flap section SCM/EX 124.00 D138000330 Side chain flap section SCM/EX 76.80 900716091 Hex head set bolt UNI 5739 M16 x 45 10.9 zn 4.47 920116001 Flat washer UNI 6592 Ø16 zn 0.60 920716006 Spring washer UNI 9195 Ø16 zn 0.80 910616001 Nylock lock nut UNI 7473 M16 10 zn 1.21
500000461 Customized attachment bracket SCM/EX including blank plate and custom made ears 3,900.00
All p
ictu
res
show
n ar
e fo
r illu
stra
tion
purp
ose
only
. Act
ual p
rodu
ct m
ay v
ary
due
to p
rodu
ct e
nhan
cem
ent.
RC
ROCK CUTTERS WITH FIXED TOOTH FOR EXCAVATORS.
EXCAVATORROCK CUTTERS
from 2,5 to 70 t
OPTIONAL
Custom made attachment plate with pinsSTANDARD EQUIPMENT
Caged frame with built-in pre-drilled attachment flat plateHydraulic block with compensating and check valveMotor safety cover
Direct drive piston motor with automatic lubrication system that requires no daily maintenance
Anti-wear plates on drum supportDrum with replaceable heavy duty rock teeth
MODEL
Power HP(CV)
RequirementsFlow gal/min
Pressure PSI Excavator weight t.
Workingwidth
(in)
Weight(Ibs)
Rotordiameter
(in)
Heightwith outbracket
(mm)min max min max min max min max
RC 25 30 50 12 21 2175 5080 2,5 7 22 660 15 770
RC 45 50 100 17 32 2610 5080 6 14 25 1040 18 900
RC 65 65 120 24 40 2610 5080 9 16 28 1410 20 960
RC 90 90 140 34 50 3190 5080 14 22 32 2515 24 1250
RC 120 140 200 45 66 3480 5080 20 34 34 3230 26 1310
RC 220 200 380 64 90 3480 5510 28 45 37 5315 30 1575
RC 260 200 400 74 106 3625 5510 35 55 39 5950 30 1675
RC 320 380 480 92 132 3625 5510 45 70 49 8050 30 1770
This information refers to the machine equipped as standard. The technical data in this catalogue may be altered without prior notice.
Tooth type R
PR
ICE
LIS
T
Part number Part description Notes Price $
RC020100000 RC-25 Rock grinder for excavator 20,600.00 020101000 RC-45 Rock grinder for excavator 26,900.00 020102000 RC-65 Rock grinder for excavator 35,500.00 020103000 RC-90 Rock grinder for excavator 49,900.00 020104000 RC-120 Rock grinder for excavator 60,800.00 020105000 RC-220 Rock grinder for excavator 86,700.00 020106000 RC-260 Rock grinder for excavator 109,700.00 020107000 RC-320 Rock grinder for excavator 132,500.00
Options
Spare Parts112800118-K Tooth type R for RC-25 RC 25 13.53 112800119-K Tooth type R for RC-45/65 RC 45/65 14.19 112800032-K Tooth type R 65 RC 90/120 43.60 112800033-K Tooth type R/HD 65 RC 90/120 65.80 112800121-K Tooth type R for RC-220 RC 220/260/320 61.55 D127001810 Spring ring Ø30 3.41
5 2018/2019-R1.0 2018/2019-R1.0 6
Excavators Exca
vato
rs
12 Metric Ton 24,000 to 32,500 lbsHeavy Duty
Cutting Edge: 1-1/4” x 10”Heavy Duty High CapCutting Edge: 1-1/4” x 10”
Severe Duty RockCutting Edge: 1-1/2” x 10”
Bolt-On Side CuttersPart Number Add. Width Quantity Approx. Weight Suggested
RetailWB34687 2” 2 45 $259
7Y0203/KIT 2-3/4” 2 45 $609
15 Metric Ton 33,000 to 41,500 lbs.Heavy Duty
Cutting Edge: 1-1/4” x 10”Heavy Duty High CapCutting Edge: 1-1/4” x 10”
Severe Duty RockCutting Edge: 1-1/2“ x 10”
Bolt-On Side CuttersPart Number Add. Width Quantity Approx. Weight Suggested
RetailWB34687 2” 2 45 $259
7Y0203/KIT 2-3/4” 2 45 $609
Heavy Duty Bucket • 51” Tip Radius Average
Part NumberBucket Capacity No. of
Teeth Retail
Bucket Pins Not Included
Weight SuggestedWidth Cut Struck Rated
EX15HD18 18” 20” 0.36 0.42 3 950 $3,694
EX15HD24 24” 26” 0.48 0.58 4 1125 $3,993
EX15HD30 30” 32” 0.60 0.74 4 1350 $4,337
EX15HD36 36” 38” 0.72 0.91 5 1425 $4,896
EX15HD42 42” 44” 0.84 1.08 5 1525 $5,150
EX15HD48 48” 50” 0.96 1.25 6 1725 $5,658
Heavy Duty High Capacity Bucket • 56” Tip Radius Average Bucket Pins Not IncludedEX15HDC18 18” 20” 0.41 0.47 3 1300 $4,294
EX15HDC24 24” 26” 0.55 0.65 4 1475 $4,959
EX15HDC30 30” 32” 0.68 0.84 4 1625 $5,227
EX15HDC36 36” 38” 0.82 1.03 5 1825 $5,685
EX15HDC42 42” 44” 0.96 1.22 5 2000 $6,078
EX15HDC48 48” 50” 1.09 1.41 6 2200 $6,447
Severe Duty Rock Bucket • 51” Tip Radius Average Bucket Pins Not IncludedEX15SD18 18” 20” 0.36 0.42 3 1150 $4,575
EX15SD24 24” 26” 0.48 0.58 4 1325 $4,991
EX15SD30 30” 32” 0.60 0.74 4 1500 $5,420
EX15SD36 36” 38” 0.72 0.91 5 1700 $6,120
EX15SD42 42” 44” 0.84 1.08 5 1850 $6,438
Heavy Duty Bucket • 49” Tip Radius Average
Part NumberBucket Capacity No. of
Teeth Retail
Bucket Pins Not Included
Weight SuggestedWidth Cut Struck Rated
EX12HD18 18” 20” 0.31 0.36 3 850 $3,296
EX12HD24 24” 26” 0.41 0.50 4 1000 $3,688
EX12HD30 30” 32” 0.52 0.65 4 1150 $4,031
EX12HD36 36” 38” 0.62 0.79 5 1300 $4,337
EX12HD42 42” 44” 0.73 0.93 5 1425 $4,603
EX12HD48 48” 50” 0.83 1.08 6 1600 $5,011
Heavy Duty High Capacity Bucket • 51” Tip Radius Average Bucket Pins Not IncludedEX12HDC18 18” 20” 0.36 0.42 3 950 $3,594
EX12HDC24 24” 26” 0.48 0.58 4 1125 $3,933
EX12HDC30 30” 32” 0.60 0.74 4 1275 $4,276
EX12HDC36 36” 38” 0.72 0.91 5 1425 $4,834
EX12HDC42 42” 44” 0.84 1.08 5 1525 $5,090
EX12HDC48 48” 50” 0.96 1.25 6 1725 $5,598
Severe Duty Rock Bucket • 49” Tip Radius Average Bucket Pins Not IncludedEX12SD18 18” 20” 0.31 0.36 3 1075 $4,125
EX12SD24 24” 26” 0.41 0.50 4 1225 $4,610
EX12SD30 30” 32” 0.52 0.65 4 1400 $5,039
EX12SD36 36” 38” 0.62 0.79 5 1600 $5,420
EX12SD42 42” 44” 0.73 0.93 5 1750 $5,755
7 2018/2019-R1.0 2018/2019-R1.0 8
Excavators Exca
vato
rs
20 Metric Ton 42,000 to 50,000 lbs.Heavy Duty
Cutting Edge: 1-1/2” x 12”Heavy Duty High CapCutting Edge: 1-1/2” x 12”
Severe Duty RockCutting Edge: 1-3/4” x 12”
Bolt-On Side CuttersPart Number Add. Width Quantity Approx. Weight Suggested Retail
PDE/KIT 3” 2 85 $4068J9614/KIT 4” 2 90 $713
25 Metric Ton 50,500 to 59,000 lbs.Heavy Duty
Cutting Edge: 1-1/2” x 12”Heavy Duty High CapCutting Edge: 1-1/2” x 12”
Severe Duty RockCutting Edge: 1-3/4” x 12”
Bolt-On Side CuttersPart Number Add. Width Quantity Approx. Weight Suggested
RetailWB34687 2” 2 45 $259
7Y0203/KIT 2-3/4” 2 45 $609
Heavy Duty Bucket • 57” Tip Radius Average
Part NumberBucket Capacity No. of
Teeth Retail
Bucket Pins Not Included
Weight SuggestedWidth Cut Struck Rated
EX20HD24 24" 26" 0.55 0.65 4 1500 $5,074 EX20HD30 30" 32" 0.68 0.84 4 1675 $5,354 EX20HD36 36" 38" 0.82 1.03 5 1900 $5,812 EX20HD42 42" 44" 0.96 1.22 5 2050 $6,218 EX20HD48 48" 50" 1.09 1.41 6 2275 $6,638 EX20HD54 54" 56" 1.23 1.60 6 2450 $7,039
Heavy Duty High Capacity Bucket • 62” Tip Radius Average Bucket Pins Not IncludedEX20HDC24 24" 26" 0.67 0.79 4 1825 $5,803 EX20HDC30 30" 32" 0.84 1.02 4 2000 $6,215 EX20HDC36 36" 38" 1.01 1.25 5 2250 $6,781 EX20HDC42 42" 44" 1.18 1.48 5 2425 $7,199 EX20HDC48 48" 50" 1.35 1.72 6 2650 $7,788 EX20HDC54 54" 56" 1.52 1.96 6 2875 $8,252
Severe Duty Rock Bucket • 57” Tip Radius Average Bucket Pins Not IncludedEX20SD24 24" 26" 0.55 0.65 4 1675 $6,343 EX20SD30 30" 32" 0.68 0.84 4 1875 $6,692 EX20SD36 36" 38" 0.82 1.03 5 2100 $7,264 EX20SD42 42" 44" 0.96 1.22 5 2300 $7,773 EX20SD48 48" 50" 1.09 1.41 6 2525 $8,298
Heavy Duty Bucket • 62” Tip Radius Average
Part NumberBucket Capacity No. of
Teeth Retail
Bucket Pins Not Included
Weight SuggestedWidth Cut Struck Rated
EX25HD24 24" 26" 0.67 0.79 3 1825 $5,951 EX25HD30 30" 32" 0.84 1.02 4 2000 $6,498 EX25HD36 36" 38" 1.01 1.25 5 2250 $6,994 EX25HD42 42" 44" 1.18 1.48 5 2425 $7,529 EX25HD48 48" 50" 1.35 1.72 6 2650 $8,024 EX25HD54 54" 56" 1.52 1.96 6 2875 $8,533 EX25HD60 60" 62" 1.68 2.19 6 3050 $9,258
Heavy Duty High Capacity Bucket • 67” Tip Radius Average Bucket Pins Not IncludedEX25HDC24 24" 26" 0.74 0.86 3 1900 $6,482 EX25HDC30 30" 32" 0.92 1.11 4 2100 $7,078 EX25HDC36 36" 38" 1.11 1.36 5 2350 $7,618 EX25HDC42 42" 44" 1.29 1.62 5 2525 $8,200 EX25HDC48 48" 50" 1.48 1.88 6 2750 $8,741 EX25HDC54 54” 56” 1.66 2.14 6 2950 $9,294 EX25HDC60 60" 62" 1.85 2.40 6 3125 $10,084
Severe Duty Rock Bucket • 62” Tip Radius Average Bucket Pins Not IncludedEX25SD24 24" 26" 0.67 0.79 3 2150 $7,439 EX25SD30 30" 32" 0.84 1.02 4 2375 $8,123 EX25SD36 36" 38" 1.01 1.25 5 2675 $8,743 EX25SD42 42" 44" 1.18 1.48 5 2900 $9,410 EX25SD48 48" 50" 1.35 1.72 6 3225 $10,030 EX25SD54 54” 56” 1.52 1.96 6 3550 $10,666
9 2018/2019-R1.0 2018/2019-R1.0 10
Excavators Exca
vato
rs
30 Metric Ton 59,500 to 68,000 lbs.Heavy Duty
Cutting Edge: 2” x 14”Heavy Duty High Cap
Cutting Edge: 2” x 14”Severe Duty Rock
Cutting Edge: 2-1/4” x 14”
Bolt-On Side CuttersPart Number Add. Width Quantity Approx. Weight Suggested Retail
T1156/KIT 3” 2 85 $6788J9614/KIT 4” 2 90 $713
35 Metric Ton 68,500 to 82,000 lbs.Heavy Duty
Cutting Edge: 2” x 14”Heavy Duty High Cap
Cutting Edge: 2” x 14”Severe Duty Rock
Cutting Edge: 2-1/4” x 14”
Bolt-On Side CuttersPart Number Add. Width Quantity Approx. Weight Suggested Retail
T1156/KIT 3” 2 85 $6788J9614/KIT 4” 2 90 $713
Heavy Duty Bucket • 67” Tip Radius Average
Part NumberBucket Capacity No. of
Teeth Retail
Bucket Pins Not Included
Weight SuggestedWidth Cut Struck Rated
EX35HD24 24” 26” 0.80 0.93 3 2250 $8,350 EX35HD30 30” 32” 1.00 1.20 4 2550 $8,980 EX35HD36 36” 38” 1.20 1.47 4 2775 $9,365 EX35HD42 42” 44” 1.40 1.75 5 3075 $10,246 EX35HD48 48” 50” 1.60 2.03 5 3275 $10,595 EX35HD54 54” 56” 1.80 2.31 6 3575 $11,483 EX35HD60 60” 62” 2.00 2.60 6 3800 $11,950 EX35HD66 66” 68” 2.21 2.88 7 4075 $12,825
Heavy Duty High Capacity Buckett • 73” Tip Radius Average Bucket Pins Not IncludedEX35HDC24 24” 26” 0.94 1.09 3 2600 $9,614 EX35HDC30 30” 32” 1.18 1.39 4 2950 $10,447 EX35HDC36 36” 38” 1.41 1.71 4 3200 $10,775 EX35HDC42 42” 44” 1.65 2.03 5 3525 $12,133 EX35HDC48 48” 50” 1.88 2.36 5 3775 $12,475 EX35HDC54 54” 56” 2.12 2.69 6 4125 $13,189 EX35HDC60 60” 62” 2.35 3.03 6 4350 $13,534 EX35HDC66 66” 68” 2.59 3.36 7 4675 $14,666
Severe Duty Rock Bucket • 67” Tip Radius Average Bucket Pins Not IncludedEX35SD24 24” 26” 0.80 0.93 3 2625 $10,021 EX35SD30 30” 32” 1.00 1.20 4 2925 $10,775 EX35SD36 36” 38” 1.20 1.47 4 3225 $11,238 EX35SD42 42” 44” 1.40 1.75 5 3600 $12,294 EX35SD48 48” 50” 1.60 2.03 5 3850 $12,714 EX35SD54 54” 56” 1.80 2.31 6 4225 $13,779 EX35SD60 60” 62” 2.00 2.60 6 4475 $14,339
Heavy Duty Bucket • 65” Tip Radius Average
Part NumberBucket Capacity No. of
Teeth Retail
Bucket Pins Not Included
Weight SuggestedWidth Cut Struck Rated
EX30HD24 24" 26" 0.74 0.86 3 1875 $6,811 EX30HD30 30" 32" 0.92 1.11 4 2125 $7,477 EX30HD36 36" 38" 1.11 1.36 4 2375 $8,017 EX30HD42 42" 44" 1.29 1.62 5 2575 $8,670 EX30HD48 48" 50" 1.48 1.88 5 2775 $9,210 EX30HD54 54" 56" 1.66 2.14 6 3025 $9,835 EX30HD60 60" 62" 1.85 2.40 6 3275 $10,623 EX30HD66 66” 68” 2.03 2.66 7 3425 $11,318
Heavy Duty High Capacity Bucket • 67” Tip Radius Average Bucket Pins Not IncludedEX32HDC24 24" 26" 0.80 0.93 3 2250 $8,163 EX32HDC30 30" 32" 1.00 1.20 4 2550 $8,792 EX32HDC36 36" 38" 1.20 1.47 4 2775 $9,177 EX32HDC42 42" 44" 1.40 1.75 5 3075 $10,058 EX32HDC48 48" 50" 1.60 2.03 5 3275 $10,407 EX32HDC54 54" 56" 1.80 2.31 6 3575 $11,295 EX32HDC60 60" 62" 2.00 2.60 6 3800 $11,762 EX32HDC66 66” 68” 2.21 2.88 7 4075 $12,638
Severe Duty Rock Bucket • 65” Tip Radius Average Bucket Pins Not IncludedEX30SD24 24" 26" 0.74 0.86 3 2250 $8,378 EX30SD30 30' 32" 0.92 1.11 4 2575 $9,197 EX30SD36 36" 38" 1.11 1.36 4 2850 $9,861 EX30SD42 42" 44" 1.29 1.62 5 3150 $10,663 EX30SD48 48" 50" 1.48 1.88 5 3400 $11,328 EX30SD54 54" 56" 1.66 2.14 6 3750 $12,096 EX30SD60 60” 62” 1.85 2.40 6 4100 $13,067
11 2018/2019-R1.0 2018/2019-R1.0 12
Excavators Exca
vato
rs
40 Metric Ton 82,500 to 105,000 lbs.
Bolt-On Side CuttersPart Number Add. Width Quantity Approx. Weight Suggested Retail
T1156/KIT 3” 2 90 $6788J9614/KIT 4” 2 90 $713
50 Metric Ton 105,000 to 125,000 lbs.Heavy Duty
Cutting Edge: 2-1/4” x 14”Heavy Duty High CapCutting Edge: 2-1/4” x 14”
Severe Duty RockCutting Edge: PER SHANK” x 14”
Bolt-On Side CuttersPart Number Add. Width Quantity Approx. Weight Suggested Retail
T1156/KIT 3” 2 90 $6788J9825/KIT 6” 2 90 $948
Heavy DutyCutting Edge: 2” x 14”
Heavy Duty High CapCutting Edge: 2” x 14”
Severe Duty RockCutting Edge: 2-1/4” x 14”
Heavy Duty Bucket • 73” Tip Radius Average
Part NumberBucket Capacity No. of
Teeth Retail
Bucket Pins Not Included
Weight SuggestedWidth Cut Struck Rated
EX40HD24 24" 26" 0.94 1.09 3 2600 $9,805 EX40HD30 30" 32" 1.18 1.39 4 2950 $10,727 EX40HD36 36" 38" 1.41 1.71 4 3200 $11,393 EX40HD42 42" 44" 1.65 2.03 5 3525 $12,307 EX40HD48 48" 50" 1.88 2.36 5 3775 $12,987 EX40HD54 54" 56" 2.12 2.69 6 4125 $14,009 EX40HD60 60" 62" 2.35 3.03 6 4350 $14,713 EX40HD66 66" 68" 2.59 3.36 7 4675 $15,626 EX40HD72 72" 74" 2.83 3.69 7 4900 $16,298
Heavy Duty High Capacity Bucket • 81” Tip Radius Average Bucket Pins Not IncludedEX40HDC24 24" 26" 1.21 1.38 3 3575 $10,787 EX40HDC30 30" 32" 1.49 1.72 4 4025 $11,708 EX40HDC36 36" 38" 1.74 2.05 4 4350 $12,392 EX40HDC42 42" 44" 2.03 2.44 5 4750 $13,311 EX40HDC48 48" 50" 2.32 2.83 5 5075 $13,992 EX40HDC54 54" 56" 2.60 3.22 6 5575 $14,987 EX40HDC60 60" 62" 2.89 3.62 6 5875 $16,446 EX40HDC66 66" 68" 3.18 4.01 7 6325 $17,419 EX40HDC72 72" 74" 3.47 4.37 7 6650 $18,123
Severe Duty Rock Bucket • 73” Tip Radius Average Bucket Pins Not IncludedEX40SD24 24" 26" 0.94 1.09 3 3000 $11,765 EX40SD30 30' 32" 1.18 1.39 3 3325 $12,873 EX40SD36 36" 38" 1.41 1.71 4 3700 $13,671 EX40SD42 42" 44" 1.65 2.03 5 4100 $14,773 EX40SD48 48" 50" 1.88 2.36 5 4375 $15,582 EX40SD54 54" 56" 2.12 2.69 6 4800 $16,813 EX40SD60 60" 62" 2.35 3.03 6 5225 $17,631
Heavy Duty Bucket • 80” Tip Radius Average
Part NumberBucket Capacity No. of
Teeth Retail
Bucket Pins Not Included
Weight SuggestedWidth Cut Struck Rated
EX50HD30 30" 32" 1.34 1.58 4 4250 $12,955 EX50HD36 36" 38" 1.61 1.94 4 4550 $13,781 EX50HD42 42" 44" 1.88 2.31 5 4950 $14,808 EX50HD48 48" 50" 2.15 2.68 5 5225 $15,827 EX50HD54 54" 56" 2.42 3.05 6 5650 $17,005 EX50HD60 60" 62" 2.69 3.44 6 5950 $18,271 EX50HD66 66" 68" 2.96 3.82 7 6350 $19,629 EX50HD72 72" 74" 3.23 4.20 7 6750 $21,087
Heavy Duty High Capacity Bucket • 84” Tip Radius Average Bucket Pins Not IncludedEX50HDC30 30" 32" 1.68 1.96 4 4525 $13,903 EX50HDC36 36" 38" 2.02 2.40 4 4850 $14,790 EX50HDC42 42" 44" 2.36 2.85 5 5275 $15,891 EX50HDC48 48" 50" 2.70 3.31 5 5600 $16,987 EX50HDC54 54" 56" 3.03 3.78 6 6025 $18,252 EX50HDC60 60" 62" 3.37 4.26 6 6350 $19,614 EX50HDC66 66" 68" 3.71 4.74 7 6800 $21,067 EX50HDC72 72" 74" 4.04 5.21 7 7300 $22,634
Severe Duty Rock Bucket • 80” Tip Radius Average Bucket Pins Not IncludedEX50SD30 30" 32" 1.34 1.58 3 5000 $15,547 EX50SD36 36" 38" 1.61 1.94 4 5350 $16,537 EX50SD42 42" 44" 1.88 2.31 4 5850 $17,770 EX50SD48 48" 50" 2.15 2.68 4 6225 $18,993 EX50SD54 54" 56" 2.42 3.05 5 6750 $20,406 EX50SD60 60" 62" 2.69 3.44 5 7150 $21,924
13 2018/2019-R1.0 2018/2019-R1.0 14
Excavators Exca
vato
rs
60 Metric Ton 125,000 to 150,000 lbs.Heavy Duty
Cutting Edge: 2-1/2” x 18”Heavy Duty High CapCutting Edge: 2-1/2” x 18”
Severe Duty RockCutting Edge: PER SHANK x 18”
Bolt-On Side CuttersPart Number Add. Width Quantity Approx. Weight Suggested Retail
T1156/KIT 3” 2 90 $6788J9825/KIT 6” 2 90 $948
70 Metric Ton 150,000 to 200,000 lbs.
Bolt-On Side CuttersPart Number Add. Width Quantity Approx. Weight Suggested Retail
T1156/KIT 3” 2 90 $6788J9825/KIT 6” 2 90 $948
Heavy DutyCutting Edge: PER SHANK x 18”
Heavy Duty High CapCutting Edge: PER SHANK x 18”
Severe Duty RockCutting Edge: PER SHANK x 18”
Heavy Duty Bucket • 82” Tip Radius Average
Part NumberBucket Capacity No. of
Teeth Retail
Bucket Pins Not Included
Weight SuggestedWidth Cut Struck Rated
EX60HD36 36" 38" 1.81 2.16 4 4650 $15,840 EX60HD42 42" 44" 2.12 2.57 4 4975 $16,849 EX60HD48 48" 50" 2.42 2.99 4 5325 $18,104 EX60HD54 54" 56" 2.72 3.41 5 5775 $19,350 EX60HD60 60" 62" 3.02 3.84 5 6100 $20,791 EX60HD66 66" 68" 3.33 4.27 6 6550 $22,336 EX60HD72 72" 74" 3.63 4.69 6 6900 $23,998 EX60HD84 84" 86" 4.23 5.55 7 7675 $27,372
Heavy Duty High Capacity Bucket • 85” Tip Radius Average Bucket Pins Not IncludedEX60HDC36 36" 38" 2.02 2.40 4 5000 $17,891 EX60HDC42 42" 44" 2.36 2.85 4 5325 $19,032 EX60HDC48 48" 50" 2.70 3.31 4 5675 $20,448 EX60HDC54 54" 56" 3.03 3.78 5 6100 $21,857 EX60HDC60 60" 62" 3.37 4.26 5 6475 $23,483 EX60HDC66 66" 68" 3.71 4.74 6 6950 $25,229 EX60HDC72 72" 74" 4.04 5.21 6 7250 $27,105 EX60HDC84 84" 86" 4.72 6.17 7 8050 $30,557
Severe Duty Rock Bucket • 82” Tip Radius Average Bucket Pins Not IncludedEX60SD36 36" 38" 1.81 2.16 4 5350 $19,345 EX60SD42 42" 44" 2.12 2.57 4 5900 $20,579 EX60SD48 48" 50" 2.42 2.99 4 6300 $22,113 EX60SD54 54" 56" 2.72 3.41 5 6850 $23,636 EX60SD60 60" 62" 3.02 3.84 5 7250 $25,395 EX60SD66 66" 68" 3.33 4.27 6 7800 $27,284
Heavy Duty Bucket • 86” Tip Radius Average
Part NumberBucket Capacity No. of
Teeth Retail
Bucket Pins Not Included
Weight SuggestedWidth Cut Struck Rated
EX70HD36 36" 38" 2.02 2.40 4 5475 $17,403 EX70HD42 42" 44" 2.36 2.85 4 5925 $18,512 EX70HD48 48" 50" 2.70 3.31 4 6300 $19,891 EX70HD54 54" 56" 3.03 3.78 5 6650 $21,264 EX70HD60 60" 62" 3.37 4.26 5 7150 $22,844 EX70HD66 66" 68" 3.71 4.74 6 7500 $24,544 EX70HD72 72" 74" 4.04 5.21 6 7975 $26,367 EX70HD84 84" 86" 4.72 6.17 7 8375 $29,900
Heavy Duty High Capacity Bucket • 92” Tip Radius Average Bucket Pins Not IncludedEX70HDC36 36" 38" 2.76 3.30 4 5900 $20,434 EX70HDC42 42" 44" 3.15 3.84 4 6275 $21,486 EX70HDC48 48" 50" 3.55 4.38 4 6775 $23,047 EX70HDC54 54" 56" 3.94 4.94 5 7150 $24,594 EX70HDC60 60" 62" 4.34 5.49 5 7650 $26,385 EX70HDC66 66" 68" 4.73 6.05 6 8000 $28,310 EX70HDC72 72" 74" 5.12 6.61 6 8500 $30,374 EX70HDC84 84" 86" 5.92 7.73 7 9500 $34,794
Severe Duty Rock Bucket • 86” Tip Radius Average Bucket Pins Not IncludedEX70SD36 36" 38" 2.36 2.85 3 6175 $21,257 EX70SD42 42" 44" 2.70 3.31 4 6600 $22,612 EX70SD48 48" 50" 3.03 3.78 4 7150 $24,796 EX70SD54 54" 56" 3.37 4.26 5 7575 $25,969 EX70SD60 60" 62" 3.71 4.74 5 8150 $27,903 EX70SD66 66" 68" 4.04 5.21 6 8550 $29,979 EX70SD72 72" 74" 4.74 5.69 6 9400 $32,206
15 2018/2019-R1.0 2018/2019-R1.0 16
Excavators Exca
vato
rs
PowerGrip Bucket
Features• Increases Productivitiy• Increases Machine’s Versatility• Includes Integral Loading Holding & Pressure
Control Manifold• Single Function Control in Handling Materials• Constant Clamp Force thru Full Rotation with
Constant Swing Speed• Increases Precision & Control
v
Features• No Teeth For Grading• Tapered Side Walls• Bolt On Edge Included• Drainage Holes standard
Metric TonClass Part Number WB
ShellBucket Capacity
Weight SuggestedRetailWidth Cut Struck Rated
Long Reach
1DCG48 1 48” 49” 0.58 0.64 950 $3,8741DCG54 1 54” 55” 0.60 0.73 1000 $4,0351DCG60 1 60” 60” 0.73 1.02 1100 $4,420
12, 15 & 20
1DCG48 1 48” 49” 0.58 0.64 950 $3,8741DCG54 1 54” 54” 0.65 0.73 1000 $4,0351DCG60 1 60” 60” 0.73 1.02 1100 $4,4201DCG66 1 66” 66” 0.80 1.12 1200 $4,5981DCG72 1 72” 72” 0.87 1.22 1300 $4,7961DCG78 1 78” 72” 0.98 1.32 1350 $5,151
25
2DCG48 2 48” 49” 0.80 1.08 1450 $5,6092DCG54 2 54” 55” 0.90 1.23 1600 $5,8572DCG60 2 60” 61” 1.00 1.38 1650 $6,1032DCG66 2 66” 67” 1.10 1.52 1750 $6,3342DCG72 2 72” 73” 1.30 1.77 1850 $6,5752DCG78 2 78” 79” 1.40 2.02 2000 $6,924
303DCG54 3 54” 56” 1.13 1.53 2000 $6,6843DCG60 3 60” 62” 1.25 1.71 2150 $7,0373DCG66 3 66” 68” 1.38 1.90 2300 $7,2813DCG72 3 72” 74” 1.51 2.09 2450 $7,5173DCG84 3 84” 85” 1.77 2.47 2750 $8,135
35
4DCG54 4 54” 56” 1.24 1.67 2600 $8,1514DCG60 4 60” 62” 1.38 1.88 2450 $8,4904DCG66 4 66” 68” 1.51 2.07 2625 $8,7414DCG72 4 72” 74” 1.61 2.28 2800 $8,9904DCG78 4 78” 80” 1.79 2.49 2950 $9,4674DCG84 4 84” 86” 1.97 2.70 3150 $9,943
405DCG60 5 60” 62” 1.48 2.01 3100 $10,3025DCG66 5 66” 68” 1.63 2.24 3275 $10,6425DCG72 5 72” 74” 1.78 2.46 3500 $11,0035DCG78 5 78” 78” 1.92 2.67 3725 $11,2815DCG84 5 84” 84” 2.07 2.89 3875 $11,616
506DCG60 6 60” 62” 1.78 2.40 3725 $12,3536DCG66 6 66” 66” 1.95 2.68 3925 $12,6676DCG72 6 72” 74” 2.13 2.92 4175 $13,3096DCG78 6 78” 80” 2.31 3.19 4375 $13,6426DCG84 6 84” 86” 2.84 3.81 4350 $13,986
For High Capacity Buckets, use theNext Class up Ditching Bucket
Except Long Reach Machines
Ditching and Grading Bucket
Bucket Pins Not Included
Machine ClassPart Bucket Capacity No. of
Teeth Weight SuggestedRetailNumber Width Rated
12 PG07-24-14T 24” 0.46 4 1330 $11,902
PG07-30-14T 30” 0.62 4 1460 $13,397
PG07-36-14T 36” 0.77 5 1670 $14,266
15 & 20
PG08-36-21T 36” 0.95 5 2000 $15,425
PG08-48-21T 48” 1.18 6 2750 $21,621
PG07-48-21D 48” 1.18 n/a* 2020 $16,139
PG07-60-21D 60” 1.50 n/a* 2330 $17,786
17 2018/2019-R1.0 2018/2019-R1.0 18
Excavators Exca
vato
rs
Severe Duty Ditching and Grading Bucket
Features• Same Features as Standard DCG Bucket plus:
• Double Bottom• Side Wear Guard• Center Rib
• Bolt On Edge Included
Metric TonClass Part Number WB
ShellBucket Capacity
Width Cut Struck Rated
Long Reach
1SDDCG48 1 48” 49” 0.58 0.64 1075 $4,6011SDDCG54 1 54” 55” 0.60 0.73 1125 $4,7881SDDCG60 1 60” 60” 0.73 1.02 1250 $5,245
12, 15 & 20
1SDDCG48 1 48” 49” 0.58 0.64 1075 $4,6011SDDCG54 1 54” 54” 0.65 0.73 1125 $4,7881SDDCG60 1 60” 60” 0.73 1.02 1250 $5,2451SDDCG66 1 66” 66” 0.80 1.12 1350 $5,4541SDDCG72 1 72” 72” 0.87 1.22 1425 $5,689
252SDDCG48 2 48” 49” 0.80 1.08 1650 $6,6512SDDCG54 2 54” 55” 0.90 1.23 1775 $6,9372SDDCG60 2 60” 61” 1.00 1.38 1875 $7,2242SDDCG66 2 66” 67” 1.10 1.52 1975 $7,4912SDDCG72 2 72” 73” 1.30 1.77 2125 $7,771
303SDDCG54 3 54” 56” 1.13 1.53 2250 $7,8843SDDCG60 3 60” 62” 1.25 1.71 2425 $8,2993SDDCG66 3 66” 68” 1.38 1.9 2625 $8,5833SDDCG72 3 72” 74” 1.51 2.09 2800 $8,861
354SDDCG54 4 54” 56” 1.24 1.67 2800 $9,6834SDDCG60 4 60” 62” 1.38 1.88 2975 $10,0984SDDCG66 4 66” 68” 1.51 2.07 3000 $10,3824SDDCG72 4 72” 74” 1.61 2.28 3175 $10,6624SDDCG78 4 78” 80” 1.79 2.49 3350 $11,235
405SDDCG60 5 60” 62” 1.48 2.01 3475 $12,1945SDDCG66 5 66” 68” 1.63 2.24 3700 $12,5965SDDCG72 5 72” 74” 1.78 2.46 3975 $13,0205SDDCG78 5 78” 78” 1.92 2.67 4200 $13,3445SDDCG84 5 84” 84” 2.07 2.89 4225 $13,738
506SDDCG60 6 60” 62” 1.78 2.40 4225 $14,6546SDDCG66 6 66” 66” 1.95 2.68 4450 $15,0256SDDCG72 6 72” 74” 2.13 2.92 4750 $15,7866SDDCG78 6 78” 80” 2.31 3.19 4975 $16,1776SDDCG84 6 84” 86” 2.84 3.81 5275 $16,581
Features• 45° Tilt Each Direction• No Teeth For Grading• Tapered Side Walls• Two Cylinder Action• Manifolds For Quick Hose Replacement• Pricing Does Not Include Hydraulics• Bolt On Edge Included
Metric TonClass Part Number
Bucket CapacityRetail
Bucket Pins Not Included
Weight SuggestedWidth Cut Struck Rated
12WTB48-1.00 48” 49” .75 1.00 1875 $9,131
WTB60-.75 60” 61” 0.60 0.75 1950 $9,420
WTB60-1.02 60” 61” 0.73 1.02 2000 $9,710
15 & 20WTB48.1.00A 48” 49” .75 1.00 1950 $10,019
WTB60-1.02A 60” 61” 0.86 1.02 2100 $10,019
WTB66-1.12A 66” 67” 0.92 1.12 2225 $10,490
25WTB60-1.38 60” 62” 1.13 1.38 2275 $14,641
WTB66-1.52 66” 68” 1.25 1.52 2400 $15,442
WTB72-1.77 72” 74” 1.45 1.77 2700 $15,837
30WTB66-1.52A 66” 68” 1.25 1.52 2500 $15,831
WTB72-2.09 72” 74” 1.71 2.09 2975 $17,149
35WTB66-2.07 66” 68” 1.70 2.07 3075 $20,382
WTB72-2.28 72” 74” 1.87 2.28 3650 $22,170
WTB84-2.28 84” 86” 1.87 2.28 3737 $22,443
40 & 50WTB78-2.67 78” 80” 2.19 2.67 4000 $24,263
WTB84-2.89 84” 86” 2.37 2.89 4375 $25,061
Hydraulic Tilting Grading Bucket
Weight SuggestedRetail
Bucket Pins Not Included
19 2018/2019-R1.0 2018/2019-R1.0 20
Excavators Exca
vato
rs
Bolt-On Cutting Edge
Features• AR400 Material• Doubled Beveled Edge• Counter Sunk Bolt Holes• Designed For Plow Bolts• Includes Hardware (nuts & bolts)• Included in Pricing for all DCG & WTB Buckets
Metric TonClass Part Number Edge
Length Thickness Width Bolt Size Weight Suggested
Retail
Grading Buckets:
12, 15 & 20
BOCE3/4-8-48 49 1/2 3/4 8 3/4” 84 $289
BOCE3/4-8-54 55 1/2 3/4 8 3/4” 94 $309
BOCE3/4-8-60 61 1/2 3/4 8 3/4” 105 $341
BOCE3/4-8-66 67 1/2 3/4 8 3/4” 115 $359
BOCE3/4-8-72 73 1/2 3/4 8 3/4” 125 $382
BOCE3/4-8-78 79 1/2 3/4 8 3/4 135 $411
Grading Buckets:
25
BOCE1-10-48 49 1/2 1 10 3/4” 140 $459
BOCE1-10-54 55 1/2 1 10 3/4” 157 $514
BOCE1-10-60 61 1/2 1 10 3/4” 174 $569
BOCE1-10-66 67 1/2 1 10 3/4” 191 $625
BOCE1-10-72 73 1/2 1 10 3/4” 208 $680
BOCE1-10-78 79 1/2 1 10 3/4” 225 $735
BOCE1-10-84 85 1/2 1 10 3/4” 242 $800
Grading Buckets: 30 & 35
Digging Buckets:
12, 15, 20, & 25
BOCE1.25-12-48 49 1/2 1-1/4 12 1” 140 $741
BOCE1.25-12-54 55 1/2 1-1/4 12 1” 157 $778
BOCE1.25-12-60 61 1/2 1-1/4 12 1” 174 $831
BOCE1.25-12-66 67 1/2 1-1/4 12 1” 191 $876
BOCE1.25-12-72 73 1/2 1-1/4 12 1” 208 $906
BOCE1.25-12-78 79 1/2 1-1/4 12 1” 225 $943
BOCE1.25-12-84 85 1/2 1-1/4 12 1” 242 $988
Grading Buckets: 40 & 50
Digging Buckets:
30, 35, & 40
BOCE1.5-12-60 61 1/2 1 1/2 12 1” 314 $963
BOCE1.5-12-66 67 1/2 1 1/2 12 1” 345 $1,009
BOCE1.5-12-72 73 1/2 1 1/2 12 1” 375 $1,055
BOCE1.5-12-78 79 1/2 1 1/2 12 1” 406 $1,102
BOCE1.5-12-84 85 1/2 1 1/2 12 1” 436 $1,149
Note: When ordering for an existing bucket, the Bucket Serial Number must be supplied.
Features• Non-Greasable• Soft, Non-heat treated• Ordered as single pins, most machines need two pins
Part Number Weight SuggestedRetail
BP-60MM 30 $193
BP-65MM 35 $259
BP-70MM 40 $291
BP-80MM 45 $317
BP-90MM 50 $348
BP-100MM 50 $459
BP-110MM 60 $590
BP-115MM 70 $648
BP-120MM 75 $1,055
BP-130MM 90 $1,609
Single Dead Pin
Part Number Weight Fitting SuggestedRetail
450216 3 10 SAE Oring $109
Diverter Valve
Features• Clean change from one attachment to another• Helps eliminates drift
21 2018/2019-R1.0 2018/2019-R1.0 22
Excavators Exca
vato
rs
Tilting Spring Loaded & D-Lock Coupler
Metric TonClass Part Number Pin Diameter
(mm) Type Pin spread range (mm) Weight (lbs) Suggested
Retail
12TD140-65 60-65 Hydraulic 345-425 680 $16,760
TSC140 60-65 Manual Dedicated 680 $11,135
15
TD180-70 70 Hydraulic 395-465 845 $20,539
TSC180 70 Manual Dedicated 840 $14,516
TD180-80 80 Hydraulic 390-485 1030 $20,539
TSC180 80 Manual Dedicated 1030 $14,516
20TD240-80 80 Hydraulic 430-525 1250 $29,117
TSC240 80 Manual Dedicated 1250 $20,701
25 - 30TD250-90 90 Hydraulic 455-545 1320 $29,117
TSC250 90 Manual Dedicated 1320 $20,701
Hyd Kit BR7-#### Made specifically for each machine $2,275
Features• Minimum of 180° rotation 90° each way (Manual Style)• Minimum of 120° rotation 60° each way (D-Lock Style)• Includes (1) set of non-greasable soft bucket pins• Includes machine specific hydraulic kit for coupler portion• Jumper hoses for tilt funcion required (not included)• Fail-Safe Safety Pin (Manual Style)• Adjustable Springs (Manual Style)• Heavy Duty Actuator
Hydraulic (D-Lock) Style shown. See Mini Section (pg. 60) for Manual Style
D-Lock Variable Center Hydraulic CouplerFeatures• Picks up multiple pins centers• Picks up multiple pin diameters• Single pin diameter couplers
available upon request• Only requires 2 hydraulic lines• Includes machine specific hydraulic kit• Includes (1) set of non-greasablesoft bucket pins
• Locks front pin in event rear pin isnot engaged
• Features only 7 moving parts
Metric TonClass Part Number Pin Diameter
(mm)Base width
(mm)Pin spread range (mm) Weight (lbs) Suggested
Retail
12 HD140-65-60 60 & 65 220 340-412 345-425 410 $7,155
15 HD180-80-70 70 & 80 278 374-465 390-495 650 $8,087
20 - 30 HD250-90-80 80 & 90 320 441-517 455-545 910 $10,775
35HD350-100-90 90 & 100 345 462-566
477-595 1240 $13,092
HD350-110-100 100 & 110 368 507-596 520-622 1490 $13,707
40HD450-110-100-B 100 & 110 368 507-596
520-622 1600 $16,383
HD450-110-100-C 100 & 110 368 550-639 563-666 1600 $16,875
50 - 70 HD650 440 600-705 2420 $27,039
85 HD850 $39,220
120 HD1200 $56,140
Hyd Kit BR7-#### Made specifically for each machine $2,275
23 2018/2019-R1.0 2018/2019-R1.0 24
Excavators Exca
vato
rs
Hydraulic Multi-Tined Thumb
Features• 120° Standard Rotation• Additional Tine Options Available• Informational Form Must be Completed When Thumb
is Working With any Non Werk-Brau Attachment
Metric TonClass Part Number Description No.
of Tines Weight SuggestedRetail
12EZG-EX12-2 EX1 - 400 2 620 $6,682
EZG-EX12-3 EX1 - 400 3 670 $6,883
EZG-EX12-4 EX1 - 400 4 740 $7,083
15EZG-EX15-2 EX1.5 - 400 2 700 $7,304
EZG-EX15-3 EX1.5 - 400 3 750 $7,545
EZG-EX15-4 EX1.5 - 400 4 800 $7,785
20EZG-EX20-3 EX2/3 - 500 3 1240 $8,996
EZG-EX20-4 EX2/3 - 500 4 1280 $9,290
25EZG-EX25-3 EX2/3 - 500 3 1240 $9,564
EZG-EX25-4 EX2/3 - 500 4 1280 $9,899
30EZG-EX30-3 EX2/3 - 500 3 1260 $10,928
EZG-EX30-4 EX2/3 - 500 4 1320 $11,302
35EZG-EX35-3 EX2/3 - 500 3 1260 $11,377
EZG-EX35-4 EX2/3 - 500 4 1320 $11,778
40EZG-EX40-3 EX4/5 - 600 3 1780 $13,479
EZG-EX40-4 EX4/5 - 600 4 1810 $13,920
50EZG-EX50-3 EX4/5 - 600 3 1930 $13,616
EZG-EX50-4 EX4/5 - 600 4 2000 $14,057
Spring Loaded Manual Coupler
Features• Fail Safe Safety Pin• Built to OEM Spacing• Lifting Loops• Adjustable Springs• Includes (1) set of bucket pins
Metric TonClass Part Number Type REF Style Weight Suggested
Retail
12SQC-EX12 Straight EX1 -400 Spring Loaded 500 $5,094
SQC-EX12C Combo EX1 - 400 Spring Loaded 500 $5,661
15SQC-EX15 Straight EX1 -400 Spring Loaded 650 $5,185
SQC-EX15C Combo EX1 - 400 Spring Loaded 650 $5,761
20 & 25SQC-EX20 Straight EX2/3 - 500 Spring Loaded 900 $6,619
SQC-EX20C Combo EX2 - 500 Spring Loaded 900 $7,355
30 & 35SQC-EX30 Straight EX2/3 - 500 Spring Loaded 1400 $8,870
SQC-EX30C Combo EX2/3 - 500 Spring Loaded 1400 $9,831
25 2018/2019-R1.0 2018/2019-R1.0 26
Excavators Exca
vato
rs
Progressive Link Hydraulic Multi-Tined Thumb
Metric TonClass Part Number Description Weight Suggested
Retail
12 EZG-EX12-PROMulti Tine Pro Link thumb
EX1 = 4001050 $8,258
15 EZG-EX15-PROMulti Tine Pro Link thumb
EX1.5 = 4001100 $10,545
20 EZG-EX20-PROMulti Tine Pro Link thumb
EX2/3 = 5001500 $11,770
25 EZG-EX25-PROMulti Tine Pro Link thumb
EX2/3 = 5001500 $12,984
30 EZG-EX30-PROMulti Tine Pro Link thumb
EX2/3 = 5001850 $14,291
35 EZG-EX35-PROMulti Tine Pro Link thumb
EX2/3 = 5001900 $16,760
40 EZG-EX40-PROMulti Tine Pro Link thumb
EX4/5 = 6001970 $17,698
50 EZG-EX50-PROMulti Tine Pro Link thumb
EX4/5 = 6003100 $19,604
Features• 180° Standard Rotation• Linkage is self contained (not through sticklinkage)
• Additional Tine Options Available• Informational Form Must be Completed WhenThumb is working With any Non Werk-BrauAttachment
Stick Mounted Multi-Tine Thumb
Metric TonClass
Part Number Description No. of
TineTine
SpacingTip
Radius Weight SuggestedRetail
12 & 15
EZRGEX1-M3-52 Rigid 2 18” 52 620 $3,537
EZRGEX1-M3-52H Hydraulic 2 18” 52 620 $6,136
EZRGEX1-M3-58 Rigid 2 18” 58 650 $3,898
EZRGEX1-M3-58H Hydraulic 2 18” 58 650 $6,497
EZRGEX1-M3-64 Rigid 2 18” 64 680 $4,259
EZRGEX1-M3-64H Hydraulic 2 18” 64 680 $6,858
20, 25& 30
EZRGEX2-TC2-56 Rigid 4 24” 56 1200 $4,469
EZRGEX2-TC2-56H Hydraulic 4 24” 56 1250 $7,356
EZRGEX2-TC2-62 Rigid 4 24” 62 1300 $5,047
EZRGEX2-TC2-62H Hydraulic 4 24” 62 1350 $7,934
EZRGEX2-TC2-67 Rigid 4 24” 67 1350 $5,624
EZRGEX2-TC2-67H Hydraulic 4 24” 67 1400 $8,512
EZRGEX2-TC2-71 Rigid 4 24” 71 1400 $6,202
EZRGEX2-TC2-71H Hydraulic 4 24” 71 1450 $9,090
EZRGEX2-TC2-78 Rigid 4 24” 78 1450 $6,779
EZRGEX2-TC2-78H Hydraulic 4 24” 78 1500 $9,667
35 &40
EZRGEX3-TC2-72 Rigid 4 32” 72 1600 $7,115
EZRGEX3-TC2-72H Hydraulic 4 32” 72 1650 $10,579
EZRGEX3-TC2-84 Rigid 4 32” 84 1700 $7,836
EZRGEX3-TC2-84H Hydraulic 4 32” 84 1750 $11,301
Features• 120° Standard Rotation• Standard Designs For Quick Delivery• Easy Installation• Not recommended for machines with couplers orhigh cap buckets
Stick mounted thumbs are a universal style, the tines may or may not mesh with the bucket, sold as is
27 2018/2019-R1.0 2018/2019-R1.0 28
Excavators Exca
vato
rs
Ripper
Features• Heavy Duty Ripper Shank• Extra Heavy Duty Upper Channel• Optimized Arc for Best Rip• CAT Tooth Installed (standard)
Metric TonClass
Part Number
ShankTooth Retail
Bucket Pins Not Included
Weight SuggestedLength Width
12, 15, & 20WBRT2 30” 2-1/2” 9W-8459 850 $3,128
WBRT2-2 30” 2-1/2” (2) 9W-8459 1100 $5,161
25, 30 & 35WBRT3 30” 2-3/4” 9W-8459 1000 $4,760
WBRT3-2 30” 2-3/4” (2) 9W-8459 1400 $7,855
40, 50, 60 & 70
WBRT4 48” 4” 9W-8559 2000 $9,398
WBRT4-2 48” 4” (2) 9W-8559 2800 $14,035
Wheel Compactor
Features• Multiple Wheels• Foot Pads Standard• Offset Wheels For Better Compaction• High Quality Bearings Used• Includes Blade
Metric TonClass
Part Number Width # of Wheels Wheel Diam Weight Suggested
Retail
12, 15, 20 & 25
WBC218-2 18” 3 42” 2,250 $8,410
WBC224-2 24” 3 42” 2,500 $8,603
WBC236-2 36” 4 42” 3,750 $9,664
Bucket Pins Not Included
29 2018/2019-R1.0 2018/2019-R1.0 30
Excavators Exca
vato
rs
Pavement Removal Bucket
Features• Ribbed Bottom to Prevent Denting• Designed for Moving Concrete Slabs andAsphalt Removal
• CAT Tooth Standard
Metric TonClass
Part Number Width No./Style of
ToothThroat
Front-Back Weight SuggestedRetail
12, 15, & 20
12PRB24 24” (3) 9W8452 19” - 14” 1900 $6,739
12PRB36 36” (3) 9W8452 19” - 14” 2100 $7,012
12PRB42 42” (4) 9W8452 15 - 10” 2500 $8,282
20, 25, 30 & 35
20PRB36 36” (3) 9W8452 15” - 10” 2100 $7,619
20PRB42 42” (4) 9W8452 15” - 10” 2500 $8,282
20PRB48H 48” (4) 9W8452 15” - 10” 3100 $9,268
40 & 50 40PRB54H 54” (4) 9W8552 20” - 14” 4800 $16,526
Bucket Pins Not Included
Grading Rake
Features• High Strength Tines• Channel Used Throughout for Strength• Work With Thumb For Grappling Action
Metric TonClass
Part Number Width No. of Tines Weight Suggested
Retail
12 & 15,
WBER36-1 36” 4 815 $2,458
WBER42-1 42” 5 925 $2,785
WBER48-1 48” 6 1150 $3,112
WBER60-1 60” 7 1200 $3,771
20 & 25WBER42-2 42” 5 1350 $4,977
WBER48-2 48” 6 1535 $5,408
WBER60-2 60” 7 1800 $6,343
30, 35, 40 & 50
WBER48-3 48” 5 1815 $6,693
WBER60-3 60” 6 2200 $8,113
WBER66-3 66” 7 2400 $8,850
WBER72-3 72” 8 2650 $9,772
Bucket Pins Not Included
31 2018/2019-R1.0 2018/2019-R1.0 32
Excavators Exca
vato
rs
Box Style Grapple
Features• Wide Mouth Opening• Greasable Pivot Points• 3 Position Mount For Rigid Version• Reinforced Box Style For Longer life• Edge Pads At the End of Each Tine• Every Grapple works with and with out a coupler• One Piece Assembly• Comes with Rigid Stick
• Hydraulic Option not available
Metric TonClass
Part Number
LowerWidth
UpperWidth
JawOpening
No. OfTines Weight Suggested
Retail
12WBBG36.05 36" 22" 86" 2/3 2100 $11,292
WBBG42.05 42" 25" 86" 2/3 2200 $12,159
WBBG48.05 48" 34" 86" 3/4 2350 $13,608
15WBBG42.1 42" 35" 86" 2/3 2100 $12,159
WBBG48.1 48" 34" 86" 3/4 2350 $13,608
WBBG54.1 54" 38" 86" 3/4 2550 $14,767
20WBBG42.15 42" 25" 86" 2/3 3350 $16,703
WBBG48.15 48" 34" 86" 3/4 3700 $18,449
WBBG54.15 54" 38" 86" 3/4 3900 $19,446
25WBBG48.2 48" 28" 112" 2/3 3700 $18,449
WBBG54.2 54" 38" 112" 3/4 3900 $19,446
WBBG60.2 60" 42" 112" 3/4 4150 $20,692
30 & 35
WBBG48.3 48" 28" 116" 2/3 4300 $21,440
WBBG54.3 54" 38" 116" 3/4 4800 $23,934
WBBG60.3 60" 46" 116" 4/5 5100 $25,429
40WBBG48.4 48" 28" 120" 2/3 5900 $26,095
WBBG54.4 54" 38" 120" 3/4 6700 $29,636
WBBG60.4 60" 46" 120" 4/5 6900 $29,965
50 & 60
WBBG60.5 60" 40" 155” 2/3 6950 $30,180
WBBG72.5 72" 50" 155” 3/4 7600 $32,393
WBBG84.5 84" 60" 155” 4/5 8700 $37,081
Hangers, Flat Plates & Hammer Adaptors
Features• Standard OEM Set up• Hanger Blanks: Loose Set of Ears• Hangers on a Flat Plate: Ears Welded to a Plate• Hangers Drilled for Hammer: Ears on a Plate with
holes drilled to specific hammer/auger/compactorpattern
Metric TonClass Part Number Description Weight Suggested
Retail
12 & 15EX1-HGS Hangers Blanks 350 $1,534
EX1-HFP Hangers on a Flat Plate 500 $1,773
EX1-HHM Hangers Drilled For Hammer 500 $2,062
20 & 25EX2-HGS Hangers Blanks 450 $1,766
EX2-HFP Hangers on a Flat Plate 600 $2,099
EX2-HHM Hangers Drilled For Hammer 600 $2,557
30 & 35EX3-HGS Hangers Blanks 550 $2,570
EX3-HFP Hangers on a Flat Plate 700 $3,298
EX3-HHM Hangers Drilled For Hammer 700 $3,536
40 & 50EX4-HGS Hangers Blanks 600 $3,161
EX4-HFP Hangers on a Flat Plate 850 $4,121
EX4-HHM Hangers Drilled For Hammer 850 $4,434
•
•
•
Bucket Pins Not IncludedBucket Pins Not Included
39 2018/2019-R1.0 2018/2019-R1.0 40
Mini & BH Mini
& BH
Universal 1 - Standard BackhoesHeavy Duty
Cutting Edge: 1” x 8”Severe Duty / Rock
Cutting Edge: 1” x 8”Coral
Cutting Edge: 1-1/4” x 8”
Heavy Duty Bucket
Part NumberBucket Capacity No. of
Teeth Retail
Bucket Pins Not Included
Weight SuggestedWidth Cut Struck Rated
WBMN12HD 12” 14” 3.00 3.50 3 390 $1,133
WBMN16HD 16” 18” 4.00 4.80 3 410 $1,256
WBMN18HD 18” 20” 4.60 5.60 4 475 $1,286
WBMN24HD 24” 26” 6.20 8.00 5 510 $1,387
WBMN30HD 30” 32” 8.00 10.50 5 545 $1,582
WBMN36HD 36” 38” 9.50 13.00 6 625 $1,759
Heavy Duty High Capacity Bucket Bucket Pins Not Included
WBMN12HDC 12” 14” 4.00 4.60 3 410 $1,377
WBMN18HDC 18” 20” 6.00 7.20 4 460 $1,522
WBMN24HDC 24” 26” 8.00 10.00 5 530 $1,626
WBMN30HDC 30” 32” 10.00 12.80 5 585 $1,809
WBMN36HDC 36” 38” 12.00 15.50 6 660 $2,121
Coral Rock Bucket Bucket Pins Not Included
CORAL12WMN2 12 13 2.75 3.25 4 430 $1,453
CORAL16WMN2 16 17 3.64 4.30 5 465 $1,547
CORAL18WMN2 18 19 4.15 4.90 6 490 $1,767
CORAL20WMN2 20 21 4.58 5.40 6 500 $1,907
CORAL24WMN2 24 25 5.68 6.70 8 540 $2,143
CORAL30WMN2 30 31 7.29 8.60 10 595 $2,404
Severe Duty Rock Bucket Bucket Pins Not Included
WBMN12SD1 12” 14” 3.00 3.50 3 425 $1,604
WBMN18SD1 18” 20” 4.60 5.60 4 490 $1,854
WBMN24SD1 24” 26” 6.20 8.00 5 540 $2,041
WBMN30SD1 30” 32” 8.00 10.50 5 595 $2,230
WBMN36SD1 36” 38” 9.50 13.00 6 645 $2,420
High Capactiy Severe Duty Rock Bucket Bucket Pins Not Included
WBMN12SDC1 12’’ 14’’ 3.90 4.60 3 495 $1,722
WBMN18SDC1 18” 20” 6.00 7.20 4 515 $2,070
WBMN24SDC1 24” 26” 8.00 10.00 5 560 $2,160
WBMN30SDC1 30” 32” 10.00 12.80 5 620 $2,336
WBMN36SDC1 36” 38” 12.00 15.50 6 700 $2,519
Part Number Add. Width Quantity Approx. Weight Suggested RetailWBMNSC 1” 2 15 $119
Ford Style BucketsHeavy Duty Ford
High CapacityStandard Duty Ford Ford Style Cemetery
Standard Duty Ford Bucket Design
Part NumberBucket Capacity No. of
Teeth Retail
Bucket Pins Not Included
Weight SuggestedWidth Cut Struck Rated
FWB12S 12” 13” 3.22 3.80 3 290 $1,586
FWB16S 16” 17” 4.66 5.50 3 325 $1,641
FWB18S 18” 19” 5.34 6.30 4 345 $1,681
FWB24S 24” 25” 7.46 8.80 5 400 $1,884
FWB30S 30” 31” 9.58 11.30 5 450 $2,034
FWB36S 36’’ 37’’ 11.69 13.80 6 510 $2,115
Heavy Duty High Capacity Ford Design Bucket Pins Not IncludedFWB12HDC 12” 13” 4.49 5.30 3 300 $1,722
FWB16HDC 16” 17” 5.93 7.00 3 330 $1,884
FWB18HDC 18” 19” 6.69 7.90 4 400 $1,972
FWB24HDC 24” 25” 8.64 10.20 5 495 $2,167
FWB30HDC 30” 31” 11.10 13.10 5 575 $2,477
FWB36HDC 36” 37” 13.56 16.00 6 670 $2,848
Standard Ford Style Cemetery Design Bucket Pins Not Included
FORD36BH 36” 37” 6.13 7.23 6 290 $2,283
41 2018/2019-R1.0 2018/2019-R1.0 42
Mini & BH Mini
& BH
Mini 04 Class 1,500 to 2,100 lbs.Heavy Duty
Cutting Edge: 3/4” x 6”
Heavy Duty Bucket Bucket Pins Not Included
Part NumberBucket Capacity No. of
Teeth Weight SuggestedRetail DNET
Width Cut Struck Rated
04MNHD8 8” 9” 0.30 0.36 2 35 $348
04MNHD10 10” 11” 0.37 0.45 3 44 $361
04MNHD12 12” 13” 0.45 0.54 3 50 $392
04MNHD16 16” 17” 0.60 0.72 3 59 $448
04MNHD18 18” 19” 0.67 0.80 4 62 $519
Mini 05 Class 2,150 to 4,900 lbs.
Severe Duty / Rock Cutting Edge: 3/4” x 6”
Heavy Duty Cutting Edge: 3/4” x 6”
CoralCutting Edge: 3/4” x 6”
Weld-On Side Cutters Part Number Add. Width Quantity Approx. Weight Suggested Retail
WBMNSC 1” Additional 2 15 $119
Heavy Duty Bucket Bucket Pins Not Included
Part NumberBucket Capacity No. of
Teeth Weight SuggestedRetail DNET
Width Cut Struck Rated05MNHD8 8” 9” 0.65 0.78 2 75 $406
05MNHD10 10” 11” 0.73 0.87 3 80 $42205MNHD12 12” 13” 0.80 1.00 3 85 $45505MNHD16 16” 17” 1.00 1.30 3 90 $51805MNHD18 18” 19” 1.10 1.50 4 105 $59705MNHD20 20” 21” 1.30 1.80 4 110 $68205MNHD24 24” 25” 1.70 2.20 5 120 $81205MNHD30 30” 31” 1.90 2.70 5 140 $986
Severe Duty Rock Bucket Bucket Pins Not Included05MNSD8 8” 9” 0.65 0.78 2 110 $546
05MNSD10 10” 11” 0.73 0.87 3 115 $56905MNSD12 12” 13” 0.80 1.00 3 120 $61205MNSD16 16” 17” 1.00 1.30 3 130 $77605MNSD18 18” 19” 1.10 1.50 4 140 $80305MNSD20 20” 21” 1.30 1.80 4 150 $1,01105MNSD24 24” 25” 1.70 2.20 5 160 $1,103
Coral Bucket Bucket Pins Not Included05MNCR8 8” 9” 0.65 0.78 3 110 $546
05MNCR10 10” 11” 0.73 0.87 3 115 $56905MNCR12 12” 13” 0.80 1.00 4 120 $61205MNCR18 18” 19” 1.10 1.50 6 140 $80305MNCR24 24” 25” 1.70 2.20 8 160 $1,103
43 2018/2019-R1.0 2018/2019-R1.0 44
Mini & BH Mini
& BH
Mini 76 Class 2,150 lbs. to 4,900 lbs.
Severe Duty / Rock Cutting Edge: 1” x 6”
Heavy Duty Cutting Edge: 3/4” x 6”
CoralCutting Edge: 1” x 6”
Weld-On Side Cutters Part Number Add. Width Quantity Approx. Weight Suggested RetailWBMNSC 1” 2 15 $119
Heavy Duty Bucket
Part NumberBucket Capacity No. of
Teeth Retail
Bucket Pins Not Included
Weight SuggestedWidth Cut Struck Rated
76MNHD10 10” 11” 0.80 1.00 3 140 $60176MNHD12 12” 13” 1.05 1.40 3 155 $61776MNHD16 16” 17” 1.35 1.90 3 170 $66876MNHD18 18” 19” 1.70 2.20 4 180 $73876MNHD20 20” 21” 2.00 2.50 4 190 $82476MNHD24 24” 25” 2.50 3.00 5 210 $94476MNHD30 30” 31” 3.20 3.80 5 235 $1,11676MNHD36 36” 37” 3.80 4.60 6 260 $1,340
Severe Duty Rock Bucket Bucket Pins Not Included76MNSD12 12” 13” 1.05 1.40 3 160 $81276MNSD16 16” 17” 1.35 1.90 3 175 $88276MNSD18 18” 19” 1.70 2.20 4 185 $97376MNSD20 20” 21” 2.00 2.50 4 195 $1,08576MNSD24 24” 25” 2.50 3.00 5 205 $1,245
Coral Bucket Bucket Pins Not Included76MNCR12 12” 13” 1.05 1.4 4 160 $81276MNCR16 16” 17” 1.35 1.9 5 175 $88276MNCR18 18” 19” 1.70 2.2 6 185 $97376MNCR20 20” 21” 2.00 2.5 6 195 $1,08576MNCR24 24” 25” 2.50 3.0 8 210 $1,245
Mini 1 Class 5,000 to 7,500 lbs.
Severe Duty / RockCutting Edge:1” x 6”
Heavy Duty Cutting Edge: 3/4” x 6”
CoralCutting Edge: 1” x 6”
Weld-On Side Cutters Part Number Add. Width Quantity Approx. Weight Suggested RetailWBMNSC 1” 2 15 $119
Heavy Duty Bucket
Part NumberBucket Capacity No. of
Teeth RetailWidth Cut Struck Rated1MNHD10 10” 11” 1.48 1.78 3 150 $8991MNHD12 12” 13” 1.77 2.13 3 160 $9161MNHD16 16” 17” 2.36 2.83 3 185 $9571MNHD18 18” 19” 2.66 3.19 4 190 $1,0151MNHD20 20” 21” 2.96 3.54 4 215 $1,0831MNHD24 24” 25” 3.54 4.25 5 250 $1,1821MNHD30 30” 31” 4.43 5.31 5 275 $1,3221MNHD36 36” 37” 5.31 6.64 6 315 $1,505
Severe Duty Rock Bucket Bucket Pins Not Included1MNSD12 12” 13” 1.77 2.13 3 205 $1,2571MNSD16 16” 17” 2.36 2.83 3 235 $1,3151MNSD18 18” 19” 2.66 3.19 4 245 $1,3931MNSD20 20” 21” 2.96 3.54 4 260 $1,4901MNSD24 24” 25” 3.54 4.25 5 290 $1,623
Coral Bucket Bucket Pins Not Included1MNCR12 12” 13” 1.77 2.13 4 205 $1,3151MNCR16 16” 17” 2.36 2.83 5 235 $1,3931MNCR18 18” 19” 2.66 3.19 6 245 $1,4901MNCR20 20” 21” 2.96 3.54 6 260 $1,6231MNCR24 24” 25” 3.54 4.25 8 290 $1,709
45 2018/2019-R1.0 2018/2019-R1.0 46
Mini & BH Mini
& BH
Mini 15 Class 7,500 to 11,000 lbs.
Severe Duty / RockCutting Edge: 1” x 6”
Heavy Duty Cutting Edge: 1” x 6”
CoralCutting Edge: 1” x 6”
Weld-On Side Cutters Part Number Add. Width Quantity Approx. Weight Suggested RetailWBMNSC 1” 2 15 $119
Heavy Duty Bucket
Part NumberBucket Capacity No. of
Teeth RetailWidth Cut Struck Rated15MNHD12 12” 13” 2.40 3.00 3 249 $1,10115MNHD16 16” 17” 3.20 4.00 3 275 $1,14415MNHD18 18” 19” 3.60 4.50 4 295 $1,18715MNHD20 20” 21” 4.00 5.10 4 315 $1,25215MNHD24 24” 25” 5.00 6.30 5 338 $1,35515MNHD30 30” 31” 6.40 8.00 5 365 $1,46815MNHD36 36” 37” 7.80 9.80 6 390 $1,667
Severe Duty Rock Bucket Bucket Pins Not Included15MNSD12 12” 13” 2.40 3.00 3 300 $1,38815MNSD16 16” 17” 3.20 4.00 3 320 $1,43015MNSD18 18” 19” 3.60 4.50 4 340 $1,49615MNSD20 20” 21” 4.00 5.10 4 350 $1,58115MNSD24 24” 25” 5.00 6.30 5 370 $1,707
Coral Bucket Bucket Pins Not Included15MNCR12 12” 13” 2.40 3.00 4 300 $1,38815MNCR16 16” 17” 3.20 4.00 5 320 $1,43015MNCR18 18” 19” 3.60 4.50 6 340 $1,49615MNCR20 20” 21” 4.00 5.10 6 350 $1,58115MNCR24 24” 25” 5.00 6.30 8 370 $1,707
Mini 2 & U2 BH Class 7,500 to 11,000 lbs.
Severe Duty / RockCutting Edge: 1” x 8”
Heavy Duty Cutting Edge: 1” x 8”
CoralCutting Edge: 1” x 8”
Weld-On Side Cutters Part Number Add. Width Quantity Approx. Weight Suggested RetailWBMNSC 1” 2 15 $119
Heavy Duty Bucket
Part NumberBucket Capacity No. of
Teeth RetailWidth Cut Struck Rated2MNHD12 12” 13” 2.60 3.25 3 290 $1,2162MNHD16 16” 17” 3.50 4.30 3 300 $1,2572MNHD18 18” 19” 3.90 4.90 4 330 $1,2982MNHD20 20” 21” 4.30 5.40 4 350 $1,3672MNHD24 24” 25” 5.20 6.70 5 390 $1,4662MNHD30 30” 31” 6.50 8.60 5 430 $1,6192MNHD36 36” 37” 7.80 10.60 6 475 $1,823
Severe Duty Rock Bucket Bucket Pins Not Included2MNSD12 12” 13” 2.60 3.25 3 320 $1,5322MNSD16 16” 17” 3.50 4.30 3 330 $1,5732MNSD18 18” 19” 3.90 4.90 4 350 $1,6392MNSD20 20” 21” 4.30 5.40 4 380 $1,7212MNSD24 24” 25” 5.20 6.70 5 420 $1,8502MNSD30 30” 31” 6.50 8.60 6 460 $2,040
Coral Bucket Bucket Pins Not Included2MNCR12 12” 13” 2.60 3.25 4 320 $1,5322MNCR16 16” 17” 3.50 4.30 5 330 $1,5732MNCR18 18” 19” 3.90 4.90 6 350 $1,6392MNCR20 20” 21” 4.30 5.40 6 380 $1,7212MNCR24 24” 25” 5.20 6.70 8 420 $1,8502MNCR30 30” 31” 6.50 8.60 10 460 $2,040
47 2018/2019-R1.0 2018/2019-R1.0 48
Mini & BH Mini
& BH
Mini 3 Class 11,000 to 14,000 lbs.
Severe Duty / Rock Cutting Edge: 1-1/4” x 8”
Heavy Duty Cutting Edge: 1” x 8”
CoralCutting Edge: 1 1/4” x 8”
Weld-On Side Cutters Part Number Add. Width Quantity Approx. Weight Suggested RetailWBMNSC 1” 2 15 $119
Heavy Duty Bucket
Part NumberBucket Capacity No. of
Teeth Retail
Bucket Pins Not Included
Weight SuggestedWidth Cut Struck Rated
3MNHD12 12” 13” 3.00 3.50 3 370 $1,5603MNHD16 16” 17” 4.00 4.80 3 410 $1,5923MNHD18 18” 19” 4.60 5.60 4 460 $1,7063MNHD20 20” 21” 5.00 5.90 4 475 $1,7753MNHD24 24” 25” 6.20 8.00 5 505 $1,9393MNHD30 30” 31” 8.00 10.50 5 540 $2,0903MNHD36 36” 37” 9.50 13.00 6 630 $2,3553MNHD42 42” 43” 11.00 15.50 6 720 $2,823
Severe Duty Rock Bucket Bucket Pins Not Included3MNSD16 16” 17” 4.00 4.80 3 440 $2,0833MNSD18 18” 19” 4.60 5.60 4 495 $2,2113MNSD20 20” 21” 5.00 5.90 4 530 $2,2943MNSD24 24” 25” 6.20 8.00 5 560 $2,5463MNSD30 30” 31” 8.00 10.50 5 690 $2,8633MNSD36 36” 37” 9.50 13.00 6 750 $3,406
Coral Bucket Bucket Pins Not Included3MNCR16 16” 17” 4.60 4.80 5 440 $2,0833MNCR18 18” 19” 5.10 5.60 6 495 $2,2113MNCR20 20” 21” 5.70 5.90 6 530 $2,2943MNCR24 24” 25” 6.80 8.00 8 560 $2,5463MNCR30 30” 31” 8.40 10.50 10 690 $2,863
Mini 4 Class 14,000 to 16,000 lbs.
Severe Duty / Rock Cutting Edge: 1 1/4” x 8”
Heavy Duty Cutting Edge: 1” x 8”
CoralCutting Edge: 1 1/4” x 8”
Bolt-On Side Cutters Part Number Add. Width Quantity Approx. Weight Suggested Retail
WBSC15/KIT 1-1/2” Additional 2 50 $175
Heavy Duty Bucket Bucket Pins Not Included
Part NumberBucket Capacity No. of
Teeth Weight SuggestedRetailWidth Cut Struck Rated
*4MNHD12 12” 13” 4.40 5.00 3 400 $1,6104MNHD16 16” 17” 5.40 6.20 3 445 $1,7014MNHD18 18” 19” 5.80 6.80 4 490 $1,8514MNHD20 20” 21” 6.40 7.60 4 525 $1,9734MNHD24 24” 25” 7.60 9.20 5 545 $2,1934MNHD30 30” 31” 9.60 11.90 5 580 $2,4134MNHD36 36” 37” 11.50 14.40 6 660 $2,6484MNHD42 42” 43” 13.40 16.90 6 780 $2,901
*WILL NOT WORK FOR ALL MACHINES
Severe Duty Rock Bucket Bucket Pins Not Included4MNSD18 18” 19” 5.80 6.80 3 510 $2,3324MNSD20 20” 21” 6.40 7.60 4 540 $2,5414MNSD24 24” 25” 7.60 9.20 4 570 $2,7464MNSD30 30” 31” 9.60 11.90 5 620 $3,2404MNSD36 36 37” 11.50 14.40 6 670 $3,466
Coral Bucket Bucket Pins Not Included4MNCR18 18” 19” 5.80 6.80 5 490 $2,3324MNCR20 20” 21” 6.40 7.60 6 540 $2,5414MNCR24 24” 25” 7.60 9.20 6 570 $2,7464MNCR30 30” 31” 9.60 11.90 8 620 $3,240
49 2018/2019-R1.0 2018/2019-R1.0 50
Mini & BH Mini
& BH
Mini 5 Class 16,000 to 25,000 lbs.
Severe Duty / Rock Cutting Edge: 1-1/4” x 8”
Heavy Duty Cutting Edge: 1 1/4” x 8”
CoralCutting Edge: 1-1/4” x 8”
Bolt-On Side Cutters Part Number Add. Width Quantity Approx. Weight Suggested Retail
WBSC15/KIT 1-1/2” Additional 2 50 $175
Heavy Duty Bucket Bucket Pins Not Included
Part NumberBucket Capacity No. of
Teeth Weight SuggestedRetailWidth Cut Struck Rated
5MNHD16 16” 17” 6.00 7.00 3 605 $2,3655MNHD18 18” 19” 6.80 7.90 3 615 $2,4055MNHD20 20” 21” 7.50 8.90 4 640 $2,4955MNHD24 24” 25” 9.00 10.90 4 655 $2,5865MNHD30 30” 31” 11.30 14.00 5 685 $2,7465MNHD36 36” 37” 13.50 17.10 5 760 $2,9365MNHD42 42” 43” 15.80 20.10 6 810 $3,130
Severe Duty Rock Bucket Bucket Pins Not Included5MNSD18 18” 19” 6.80 7.90 3 680 $3,0305MNSD20 20” 21” 7.50 8.90 3 700 $3,1445MNSD24 24” 25” 9.00 10.90 4 720 $3,2585MNSD30 30” 31” 11.30 14.00 5 750 $3,4635MNSD36 36” 37” 13.50 17.10 5 820 $3,6985MNSD42 42” 43” 15.80 20.10 6 870 $3,986
Coral Bucket Bucket Pins Not Included5MNCR18 18” 19” 6.80 7.90 4 690 $3,0305MNCR20 20” 21” 7.50 8.90 4 710 $3,1445MNCR24 24” 25” 9.00 10.90 5 730 $3,2585MNCR30 30” 31” 11.30 14.00 7 760 $3,4635MNCR36 36” 37” 13.50 17.10 8 830 $3,698
PowerGrip Bucket
Features• Increases Productivitiy• Increases Machine’s Versatility• Includes Integral Loading Holding & Pressure
Control Manifold• Single Function Control in Handling Materials• Constant Clamp Force thru Full Rotation with
Constant Swing Speed• Increases Precision & Control
Machine ClassPart Bucket Capacity No. of
Teeth Weight SuggestedRetailNumber Width Rated
1 & 15 PG05-24-5T 24” 4.50 5 525 $6,422
2, 3, U2 & U1
PG06-24-9T 24” 7.50 5 700 $8,371
PG06-30-9T 30” 9.40 5 850 $8,821
4 & 5PG07-24-9T 24” 7.50 5 900 $10,619
PG07-30-9T 30” 9.40 5 980 $11,577
Bucket Pins Not Included
51 2018/2019-R1.0 2018/2019-R1.0 52
Mini & BH Mini
& BH
Features• 45° Tilt Each Direction• No Teeth for Grading• Tapered Side Walls• One Cylinder Action
• Except on Mini 5 (Two Cylinder)• Bolt on Edge Included
Hydraulic Tilting and Grading BucketDitching and Grading Bucket
Features• No Teeth for Grading and Finishing• Tapered Side Walls• Drainage holes only in Mini 5 Class• Bolt on Edge included
Class Part Number Lip SizeBucket Capacity
Weight SuggestedRetailWidth Cut Struck Rated
05 05MNDCG24 3/4” X 6” 24” 25” 1.70 2.20 130 $833
05MNDCG30 3/4” X 6” 30” 31” 1.90 2.70 150 $1,029
76
76MNDCG24 3/4” X 6” 24” 25” 2.50 3.00 197 $872
76MNDCG30 3/4” X 6” 30” 31” 3.20 3.80 224 $1,016
76MNDCG36 3/4” X 6” 36” 37” 3.80 4.60 250 $1,093
76MNDCG42 3/4” X 6” 42” 43” 5.20 6.20 276 $1,247
76MNDCG48 3/4” X 6” 48” 49” 5.80 7.00 300 $1,371
1 & 15
1MNDCG24 3/4” X 6” 24” 25” 3.54 4.25 217 $963
1MNDCG30 3/4” X 6” 30” 31” 4.43 5.31 244 $1,104
1MNDCG36 3/4” X 6” 36” 37” 5.31 6.64 269 $1,232
1MNDCG42 3/4” X 6” 42” 43” 6.20 7.40 296 $1,372
1MNDCG48 3/4” X 6“ 48” 49” 7.00 8.50 323 $1,520
2, 3, U2 & U1
3MNDCG30 1” X 6” 30” 31” 6.20 7.80 484 $1,645
3MNDCG36 1” X 6” 36” 37” 6.30 8.00 524 $1,794
3MNDCG42 1” X 6” 42” 43” 8.80 11.00 552 $2,020
3MNDCG48 1” X 6” 48” 49” 10.00 12.50 584 $2,129
3MNDCG54 1” X 6” 54” 55” 11.20 14.10 614 $2,285
3MNDCG60 1” X 6” 60” 61” 12.10 15.90 655 $2,564
4
4MNDCG36 1” X 6” 36” 37” 9.80 11.70 664 $2,302
4MNDCG42 1” X 6” 42” 43” 11.30 13.70 692 $2,414
4MNDCG48 1” X 6” 48” 49” 13.00 15.80 734 $2,542
4MNDCG54 1” X 6” 54” 55” 14.50 17.80 764 $2,659
4MNDCG60 1” X 6” 60” 61” 15.80 19.80 805 $2,779
5
5MNDCG42 1” X 8” 42” 43” 12.60 15.60 775 $2,793
5MNDCG48 1” X 8” 48” 49” 14.40 18.00 834 $2,976
5MNDCG54 1” X 8” 54” 55” 16.20 20.30 898 $3,197
5MNDCG60 1” X 8” 60” 61” 18.00 22.70 855 $3,395
5MNDCG72 1” X 8” 72” 73” 22.40 27.50 960 $3,792
For High Capacity Buckets, use the Next Class up Ditching Bucket
Except Long Reach Machines
Bucket Pins Not Included
Class Part NumberBucket Capacity
Weight SuggestedRetailWidth Cut Struck Rated
76 WTB05-36 36” 37” 3.00 3.45 339 $6,086
WTB05-39 39” 40” 4.00 4.60 542 $6,315
1, 15, 2 & U2
WTB1-36 36” 37” 5.50 6.30 609 $6,283
WTB1-42 42” 43” 6.50 7.40 675 $6,487
WTB1-48 48” 49” 7.50 8.50 713 $6,827
3 & U1 WTB3-36 36” 37” 7.50 9.40 834 $7,429
WTB3-42 42” 43” 8.75 10.00 872 $7,595
WTB3-48 48” 49” 10.00 12.50 934 $8,003
4 & 5WTB5-48 48” 49” 10.00 12.50 934 $8,003
WTB5-54 54” 55” 11.20 14.10 994 $8,275
WTB5-60 60” 61” 12.50 15.70 1105 $8,589
Bucket Pins Not Included
53 2018/2019-R1.0 2018/2019-R1.0 54
Mini & BH Mini
& BH
Features• AR400 Material• Doubled Beveled Edge• Counter Sunk Bolt Holes• Designed for Plow Bolts• Includes Hardware (nuts & bolts)• Included in Pricing for all DCG & WTB Buckets
Bolt-On Cutting Edge
Class Part Number Edge Width Thickness Width Bolt
Size Weight SuggestedRetail
DCG Buckets:76, 1, & 15
WTB Buckets:76 & 1
Digging Buckets:
04, 05, 76, & 1
BOCE5/8-6-24 25 1/2 5/8 6 5/8” 27 $132
BOCE5/8-6-30 31 1/2 5/8 6 5/8” 34 $165
BOCE5/8-6-36 36 1/2 5/8 6 5/8” 39 $189
BOCE5/8-6-39 40 1/2 5/8 6 5/8” 42 $210
BOCE5/8-6-42 43 1/2 5/8 6 5/8” 46 $227
BOCE5/8-6-48 49 1/2 5/8 6 5/8” 53 $258
BOCE5/8-6-54 55 1/2 5/8 6 5/8” 94 $309
BOCE5/8-6-60 61 1/2 5/8 6 5/8” 105 $341
DCG Buckets: 2, 3, 4,
5, U2 & U1WTB Buckets: 15, 2, 3, 4, 5, U2 & U1
Digging Buckets:
15, 2, 3, 4, 5
BOCE3/4-8-30 31 1/2 3/4 8 3/4” 54 $175
BOCE3/4-8-36 37 1/2 3/4 8 3/4” 64 $209
BOCE3/4-8-42 42 1/2 3/4 8 3/4” 72 $236
BOCE3/4-8-48 49 1/2 3/4 8 3/4” 84 $275
BOCE3/4-8-54 55 1/2 3/4 8 3/4” 94 $309
BOCE3/4-8-60 61 1/2 3/4 8 3/4” 105 $341
Cemetery / Bell Hole BucketFeatures• Designed for digging graves and digging deep straight walls• Not for standard trenching• Flat Bottom• Round Back When Curled• No Drag When Curled
Standard Design: Closed Back
Class Part Number
Bucket Capacity No. of Teeth RetailWidth Cut Struck Rated
05 05MN24BH 24” 25” 2.00 2.50 5 175 $1,052
76, 1 & 15 1MN36BH 36” 37” 2.90 3.48 6 265 $1,436
2, 3, 4, U2 & U1
3MN36BH 36” 37” 7.10 8.52 6 500 $1,610
3MN42BH 42” 43” 8.25 9.95 7 550 $2,011
55MN36BH 36” 37” 8.75 11.00 5 630 $3,018
5MN42BH 42” 43” 10.00 12.50 6 660 $3,449
55 2018/2019-R1.0 2018/2019-R1.0 56
Mini & BH Mini
& BH
Cribbing Bucket
Features• Extra Heavy Duty Side Plates• Hook Shape for Prying Railroad Ties• Flat Top For Hangers• Additional Side Wear Plates
Class Part Number
Bucket Width Style No. of
Teeth Weight SuggestedRetail
1 & 15 8HDCRIB-2 8” Mini (2) 8330 200 $1,312
2, 3, 4, 5, & U1
8HDCRIB 8” Standard (2) 8340 350 $1,579
8HDCRIBL 8” Long (2) 8340 350 $1,740
Bucket Pins Not Included
Wedge Lock Coupler
Features• Works with JD ZTS (w/ same size)• Wedge is tightened by Nut and Bolt• Bucket Pins Included
Class Part Number Type Weight SuggestedRetail
76 & 1 WBMWLK-76 Wedge 55 $1,172
15 & 2 WBMWLK-15 Wedge 80 $1,367
3 & 4 WBMWLK-3 Wedge 170 $1,916
Single Dead Pin
Features• Non-Greasable• Soft, Non-heat treated• Ordered as single pins, most machines need two pins
Class Part Number Weight SuggestedRetail
04 & 05 BP-25MM 10 $85
76, 1 & 15 BP-30MM 10 $108
76, 1 & 15 BP-35MM 10 $117
15, 2 & 3 BP-40MM 12 $131
2, 3 U2 & U1 BP-45MM 15 $139
2, 3 U2 & U1 BP-50MM 20 $169
4 & 5 BP-55MM 25 $177
4 & 5 BP-60MM 30 $193
57 2018/2019-R1.0 2018/2019-R1.0 58
Mini & BH Mini
& BH
KLAC Coupler & Hanger Blanks
Class Part Number Coupler Style Part Extension
KlacClass Weight Suggested
Retail
05 (2,200-4,400 lbs)
WBKLC-M Mechanical C 30 $1,250
WBKLC-BL Blank Plate C 15 $277
76(4,400 - 7,700 lbs)
WBKLD-M Mechanical D 60 $1,531
WBKLD-PR Klac Protect D 10 $498
WBKLD-BL Blank Plate D 20 $367
1 & 15(7,700 - 12,100 lbs)
WBKLE-M Mechanical E 100 $1,542
WBKLE-PR Klac Protect E 15 $498
WBKLE-BL Blank Plate E 40 $409
3 & 4(12,100 - 22,000 lbs)
WBKLF-M Mechanical F 150 $2,054
WBKLF-PR Klac Protect F 15 $537
WBKLF-BL Blank Plate F 50 $566
KLAC Coupler (Mechanical)
KLAC BlankKLAC Protect
• Center of gravity catch for extra safety• Meets and exceeds all Europeanand North American Safety requirements
• Minimal wear from age and usestays tight
• Does not include mounting-hardened pins
• A hose protection system• Spring guarded hose• Steel cover to protectretracted hose
• Blanks Ready to install• Easy to add to existing bucketinventory
ClassPart Bucket Capacity No. of
Teeth Weight SuggestedRetailNumber Width Cut Struck Rated
0505MNHD8-KLC 8 9 0.65 0.78 2 75 $63305MNHD12-KLC 12 13 0.80 1.00 3 85 $68405MNHD18-KLC 18 19 1.10 1.50 4 105 $83805MNHD24-KLC 24 25 1.70 2.20 5 120 $1,071
7676MNHD10-KLD 10 11 0.80 1.00 3 120 $91876MNHD12-KLD 12 13 1.05 1.40 3 135 $93876MNHD18-KLD 18 19 1.70 2.20 4 155 $1,06876MNHD24-KLD 24 25 2.50 3.00 5 180 $1,29076MNHD36-KLD 36 37 3.80 4.60 6 220 $1,719
1
1MNHD12-KLE 12 13 1.77 2.13 3 160 $1,2911MNHD16-KLE 16 17 2.36 2.83 3 185 $1,3371MNHD18-KLE 18 19 2.66 3.19 4 190 $1,3981MNHD20-KLE 20 21 2.96 3.54 4 215 $1,4721MNHD24-KLE 24 25 3.54 4.25 5 250 $1,5791MNHD30-KLE 60 61 4.43 5.31 5 275 $1,7311MNHD36-KLE 36 37 5.31 6.64 6 315 $1,928
15
15MNHD12-KLE 12 13 2.40 3.00 3 249 $1,49215MNHD18-KLE 18 19 3.60 4.50 4 295 $1,58515MNHD24-KLE 24 25 5.00 6.30 5 338 $1,76515MNHD30-KLE 30 31 6.40 8.00 5 365 $1,88915MNHD36-KLE 36 37 7.80 9.80 6 390 $2,10415MNHD42-KLE 42 43 9.20 11.60 6 415 $2,28815MNHD48-KLE 48 49 10.60 13.40 7 435 $2,455
3 & 4
3MNHD12-KLF 12 13 3.00 3.50 3 370 $2,0893MNHD16-KLF 16 17 4.00 4.80 3 410 $2,1233MNHD18-KLF 18 19 4.60 5.60 4 460 $2,2443MNHD24-KLF 24 25 6.20 8.00 5 505 $2,4933MNHD30-KLF 30 31 8.00 10.50 5 540 $2,6553MNHD36-KLF 36 37 9.50 13.00 6 630 $2,9393MNHD42-KLF 42 43 11.00 15.50 6 720 $3,240
1 (DCG)
1MNDCG24-E 24 25 2.50 3.00 N/A 170 $1,2201MNDCG30-E 30 31 3.20 3.80 N/A 190 $1,3421MNDCG36-E 36 37 3.80 4.60 N/A 210 $1,4591MNDCG42-E 42 43 5.20 6.20 N/A 230 $1,5751MNDCG48-E 48 49 5.80 7.00 N/A 250 $1,708
KLAC Bucket
Features• Campatable with matching Klac Coupler (pg. 58)• Does not increase Tip Radius• Hold Machines standard break out Force• Heavy duty bucket profile
59 2018/2019-R1.0 2018/2019-R1.0 60
Mini & BH Mini
& BH
D-Lock Variable Center Hydraulic Coupler
Metric TonClass Part Number Pin Diameter
(mm)Base width
(mm)Pin spread range (mm) Weight (lbs) Suggested
Retail
76,1, 15, 2 & 3
HD035-35 35 120 170-223 130 $5,262
HD035-40 40 120 170-223 130 $5,262
HD055-45A 45 144 220-255 130 $5,262
HD055-45D 45 144 230-265 130 $5,262
HD055-45B 45 144 242-277 130 $5,262
HD055-45C 45 144 261-296 130 $5,262
3 & 4HD080-45 45 165 280-315 187 $5,660
HD080-50 50 165 280-315 187 $5,660
HD080-55 55 165 280-315 187 $5,660
4 & 5 HD080-60 60 165 TBD 210 $5,660
Hyd Kit BR7-#### Made specifically for each machine $2,275
Features• Picks up multiple pins centers• Only requires 2 hydraulic lines• Includes machine specific hydraulic kit• Includes (1) set of non-greasable soft bucket pins• Locks front pin in event rear pin is not engaged• Features only 7 moving parts
Tilting Spring Loaded & D-Lock Coupler
Metric TonClass Part Number Type Style Weight
(lbs)Suggested
Retail
1 TSC035 Manual Spring Loaded 160 $6,302
15 & 2TSC055 Manual Spring Loaded 320 $7,669
TD055-45 Hydraulic D-Lock 375 $12,737
3 & 4
TSC080 Manual Spring Loaded 315 $9,028
TD080-45 Hydraulic D-Lock 530 $13,895
TD080-50 Hydraulic D-Lock 530 $13,895
TD080-55 Hydraulic D-Lock 530 $13,895
Hyd Kit BR7-#### Made specifically for each machine $2,275
Features• Minimum of 180° rotation 90° each way (Manual Style)• Minimum of 120° rotation 60° each way (D-Lock Style)• Includes (1) set of non-greasable soft bucket pins• Includes machine specific hydraulic kit for coupler portion• Jumper hoses for tilt funcion required (not included)• Fail-Safe Safety Pin (Manual Style)• Adjustable Springs (Manual Style)• Heavy Duty Actuator•
Spring Loaded style shown. See Full-Sized Section (pg. 22) for D-Lock Style
61 2018/2019-R1.0 2018/2019-R1.0 62
Mini & BH Mini
& BH
Spring Loaded Manual Coupler
Features• Fail Safe Safety Pin• Built to OEM Spacing• Lifting Loops• Adjustable Springs• Includes (1) set of bucket pins
Class Part Number Type Style Weight SuggestedRetail
04 QT-04MN StraightPull Pin
Smaller than 30mm50 $1,499
05 & 76SLQT-05MN Straight Spring Loaded 60 $1,818
SLQT-05MN-CC Combo Spring Loaded 60 $2,127
1 & 15SLQT-1MN Straight Spring Loaded 110 $1,829
SLQT-1MN-CC Combo Spring Loaded 110 $2,211
2SLQT-2MN Straight Spring Loaded 190 $1,956
SLQT-2MN-CC Combo Spring Loaded 190 $2,280
3, 4, U1 & U2
SLQT-3MN Straight Spring Loaded 200 $2,301
SLQT-3MN-CC Combo Spring Loaded 200 $2,683
5SLQT-5MN Straight Spring Loaded 250 $2,640
SLQT-5MN-CC Combo Spring Loaded 250 $3,083
Mini Multi-Tined Thumb
Features• 120° Standard Rotation• Additional Tine Options Available• Informational Form Must be Completed When Thumbis Working with any Non Werk-Brau Attachment
• Hydraulic Cylinder and Rigid Arms Available• When quoting/ordering please specify if machine isExtenda-a-hoe & if machine has OEM CylinderMount
Class Part Number Description Weight SuggestedRetail
05EZG05MT-2(H/R) 2 Tine Main Pin Hyd or Rigid 75 $2,295
EZG05MT-3(H/R) 3 Tine Main Pin Hyd or Rigid 85 $2,355
76EZG76MT-2(H/R) 2 Tine Main Pin Hyd or Rigid 150 $2,548
EZG76MT-3(H/R) 3 Tine Main Pin Hyd or Rigid 160 $2,607
1, 15 & 2
EZG1MT-2(H/R) 2 Tine Main Pin Hyd or Rigid 200 $2,783
EZG1MT-3(H/R) 3 Tine Main Pin Hyd or Rigid 210 $2,844
EZG1MT-4(H/R) 4 Tine Main Pin Hyd or Rigid 225 $2,977
3EZG3MT-2(H/R) 2 Tine Main Pin Hyd or Rigid 300 $3,701
EZG3MT-3(H/R) 3 Tine Main Pin Hyd or Rigid 315 $3,774
EZG3MT-4(H/R) 4 Tine Main Pin Hyd or Rigid 330 $3,847
4EZG4MT-2H 2 Tine Main Pin Hyd 320 $3,998
EZG4MT-3H 3 Tine Main Pin Hyd 340 $4,105
EZG4MT-4H 4 Tine Main Pin Hyd 360 $4,211
5EZG5MT-2H 2 Tine Main Pin Hyd 350 $4,412
EZG5MT-3H 3 Tine Main Pin Hyd 370 $4,532
EZG5MT-4H 4 Tine Main Pin Hyd 390 $4,652
63 2018/2019-R1.0 2018/2019-R1.0 64
Mini & BH Mini
& BH
Features• 120° Standard Rotation• Additional Tine Options Available• Informational Form Must be Completed When Thumbis Working with any Non Werk-Brau Attachment
• Hydraulic Cylinder and Rigid Arms Available• When quoting/ordering please specify if machine isExtenda-a-hoe & if machine has OEM CylinderMount
Class Part Number Description Weight SuggestedRetail
U1 & U2
EZG3ML-(H/R) Toe Plate use on standard stick 260 $3,666
EZG3MT-2(H/R) Multi-tine EZ-Grip (Specify width) 275 $3,666
EZG3MT-3(H/R) 3 Tine Main Pin Hyd or Rigid 315 $3,738
EZG3MT-4(H/R) 4 Tine Main Pin Hyd or Rigid 330 $3,810
Special
EZG580TM-LH/R) Toe Plate use on standard stick 260 $3,596
EZG580TM-M(H/R) Multi-tine Ez-Grip (Specify width) 275 $3,740
EZG580SM-L(H/R) EZ-Grip for use on standard stick 260 $3,474
EZG580SM-M(H/R) Multi-tine Ez-Grip (Specify width) 275 $3,616
*EZG-590N-S(H/R) Multi-tine Ez-Grip (Specify width) 275 $3,474
*EZG-590N-E Multi-tine Ez-Grip (Specify width) 275 $3,613
*
**EZG-5318-64(H/R) Stick Mounted Hyd Multi Tine 195 $3,125
*
Progressive Link Hydraulic Multi-Tined
Features• 180° Standard Rotation• Linkage is self contained (not throughstick linkage)
• Informational Form Must be CompletedWhen Thumb is working With any NonWerk-Brau Attachment
Class Part Number Description Weight SuggestedRetail
1, 15& 2
EZG1P-2 2 Tine Pro Link 200 $4,880
EZG1P-3 3 Tine Pro Link 210 $4,942
3EZG3P-2 2 Tine Pro Link 300 $5,357
EZG3P-3 3 Tine Pro Link 315 $5,433
EZG3P-4 4 Tine Pro Link 330 $5,508
4EZG4P-2 2 Tine Pro Link 360 $6,457
EZG4P-3 3 Tine Pro Link 340 $6,567
EZG4P-4 4 Tine Pro Link 360 $6,677
5EZG5P-2 2 Tine Pro Link 370 $6,731
EZG5P-3 3 Tine Pro Link 390 $6,856
EZG5P-4 4 Tine Pro Link 410 $6,980
65 2018/2019-R1.0 2018/2019-R1.0 66
Mini & BH Mini
& BH
Stick Mounted Multi-Tined Thumb
Class Part Number Style TipRadius
TineWidth Weight Suggested
Retail
1, 15 & 2
EZG1-TC3-32H=Hydraulic
R= Rigid Arm
32” 8-1/2” 125 $2,195
EZG1-TC3-36 36” 8-1/2” 135 $2,223
EZG1-TC3-38 38” 8-1/2” 138 $2,253
3, 4 & 5
EZG3-TC3-42H=Hydraulic
R= Rigid Arm
42-1/2” 11” 275 $3,022
EZG3-TC3-46 46” 11” 275 $3,097
EZG3-TC3-50 50-1/2” 11” 310 $3,165
Features• 131° Standard Rotation• Standard Design For Quick Delivery• Easy Installation• Not recommended for machines with couplers
Part Number Weight Fitting SuggestedRetail
450214 3 8 SAE Oring $93
Diverter Valve
Features• Clean change from one attachment to another• Helps eliminates drift
Ripper
Features• Heavy Duty Ripper Shank• Extra Heavy Duty Upper Channel• Optimized Arc for Best Rip
Class Part Number Length Width Tooth Approx.
WeightSuggested
Retail
04 & 05 WBR04 18” 1” (1) 8623 95 $1,040
76,1 & 15 WBR05 24" 1” (1) 8623 125 $1,120
U1, U2, 2, 3 & 4 WBR1 24" 1-1/2” (1) 6Y3222T 225 $1,308
5 WBR2 24" 2” (1) 6Y3222T 250 $1,744
Bucket Pins Not Included
67 2018/2019-R1.0 2018/2019-R1.0 68
Mini & BH Mini
& BH
Wheel CompactorFeatures• Multiple Wheels• Foot Pads Standard• Offset Wheels For Better Compaction• High Quality Bearings Used• Includes Blade
Class Part Number Width # of Wheels Wheel Diam Weight Suggested
Retail
05, 76, 1, 15, & 2
WBC0512-2 12” 2 22” 375 $2,764
WBC0518-2 18” 3 22” 550 $3,187
WBC0524-2 24” 4 22” 725 $4,461
3, 4, 5, U2 & U1
WCBH18-2 18” 3 28” 1,000 $5,206
WCBH24-2 24” 3 28” 1,100 $5,420
Bucket Pins Not Included
Pavement Removal BucketFeatures• Ribbed Bottom to Prevent Denting• Designed for Moving Concrete Slabs andAsphalt Removal
Bucket Pins Not Included
Class Part Number Bucket Width
No./Style Teeth Weight Suggested
Retail
1 & 15PRB118 18” (3) 8330 275 $1,449
PRB124 24” (4) 8330 370 $1,785
2PRB218 18” (3) 8330 400 $1,940
PRB224 24” (4) 8330 600 $2,212
3, 4, U2 & U1PRB324 24” (4) 6Y3222 750 $2,163
PRB336 36” (5) 6Y3222 835 $2,667
5PRB424 24” (4) 6Y3222 950 $2,408
PRB436 36” (4) 6Y3222 750 $3,497
69 2018/2019-R1.0 2018/2019-R1.0 70
Mini & BH Mini
& BH
Grading/Grapple Rake
Features• High Strength Serrated Tines• Channel Used Throughout for Strength• Work With Thumb For Grappling Action
• Thumb not included in Pricing• Must add corresponding Thumb (EZG) tomake complete Grapple
Class Part Number Width No. of Tines Weight SuggestedRetail
1 & 151GR18 18” 3 200 $1,449
1GR24 24” 5 250 $1,694
U1, U2, 2, & 3
2GR24 24” 3 275 $1,957
2GR36 36” 5 320 $2,069
2GR42 42” 5 350 $2,244
4 & 54GR36 36” 5 350 $2,175
4GR42 42” 5 390 $2,388
4GR48 48” 5 425 $2,550
Bucket Pins Not Included
Hangers, Flat Plates & Hammer AdaptorsFeatures• Standard OEM Set up• Hanger Blanks: Loose Set of Ears• Hangers on a Flat Plate: Ears Welded to a Plate• Hangers Drilled for Hammer: Ears on a Plate with
holes drilled to specific hammer/auger/compactorpattern
Class Part Number Description Weight SuggestedRetail
04, 05, & 76
05MN-HGS Hangers Only 20 $466
05MN-HFP Hangers on a Flat Plate 35 $548
05MN-HHM Hangers drilled for hammer 35 $715
1 & 1515MN-HGS Hangers Only 40 $661
15MN-HFP Hangers on a Flat Plate 60 $776
15MN-HHM Hangers drilled for hammer 60 $943
2, 3, U1 & U2
3MN-HGS Hangers Only 45 $780
3MN-HFP Hangers on a Flat Plate 65 $918
3MN-HHM Hangers drilled for hammer 65 $1,100
4 & 54MN-HGS Hangers Only 50 $818
4MN-HFP Hangers on a Flat Plate 70 $963
4MN-HHM Hangers drilled for hammer 70 $1,148
Bobcat X-Change 6737698 X-Change Adapter 70 $756
Bucket Pins Not Included
1/16 yard (Less than 4500 lb.) COMPACT EXCAVATOR BUCKETS & COUPLERS
BUCKETS
Gannon Pin-On
Style /Width
Cap.Cu. Ft.
Wt.(lbs.)
Lip Size(in.)
No.Teeth
ListPrice
GannonQuick Change
Style /Width
Cap.Cu. Ft.
Wt.(lbs.)
Lip Size(in.)
No.Teeth
ListPrice
HEAVY-DUTY
15
14
HDM15-9 0.59 65 0.625 2 $ 702 HEAVY-DUTY
15
14
HDM15-9 0.59 57 0.625 2 $ 653
HDM15-12 1.08 77 0.625 3 765 HDM15-12 1.08 65 0.625 3 716
HDM15-16 1.26 87 0.625 4 852 HDM15-16 1.26 75 0.625 4 777
HDM15-18 1.45 92 0.625 4 878 HDM15-18 1.45 80 0.625 4 815
HDM15-20 1.75 100 0.625 4 941 HDM15-20 1.75 85 0.625 4 866
HDM15-24 2.05 108 0.625 4 1,016 HDM15-24 2.05 92 0.625 4 903
Gannon Pin-OnBolt-On
Cutting Edge Gannon Quick ChangeBolt-On
Cutting Edge
DITCHING &GRADING
15
14
HDM15-30 2.25 135 Standard $ 991
DITCHING &GRADING
15
14
HDM15-30 2.25 130 Standard $ 866
HDM15-36 3.00 150 Standard 1,091 HDM15-36 3.00 145 Standard 953
COUPLERS
Gannon Quick Change Style / DescriptionWt.
(lbs.)List
Price
QUICK CHANGE
Quick Change 20 $ 859
Rev. 4/9/18
1/8 yard (4,500 to 9,000 lb.) COMPACT EXCAVATOR BUCKETS & COUPLERS
BUCKETS
Gannon Pin-On
Style / Width
Cap.Cu. Ft.
Wt.(lbs.)
Lip Size(in.)
No.Teeth
ListPrice
Wain-Roy QC(Original, XLS)
Style / Width
Cap.Cu. Ft.
Wt.(lbs.)
Lip Size(in.)
No.Teeth
ListPrice
HEAVY-DUTY
30.4
27.8
HDM30-10 1.4 163 0.75 3 $ 682 HEAVY-DUTY
31.6
28.6
HDM30-10 1.4 155 0.75 3 $ 694HDM30-12 1.6 168 0.75 3 743 HDM30-12 1.6 160 0.75 3 731HDM30-16 2.5 184 0.75 3 804 HDM30-16 2.5 176 0.75 3 792HDM30-18 2.8 199 0.75 4 840 HDM30-18 2.8 190 0.75 4 828HDM30-20 3.4 213 0.75 4 889 HDM30-20 3.4 203 0.75 4 877HDM30-24 4.0 246 0.75 5 926 HDM30-24 4.0 235 0.75 5 926HDM30-30 5.2 302 0.75 6 987 HDM30-30 5.2 296 0.75 6 974HDM30-36 6.4 362 0.75 7 1,145 HDM30-36 6.4 351 0.75 7 1,133
Optional Welded Side Cutter Extensions, Add: 174 Optional Welded Side Cutter Extensions, Add: 174
Gannon Pin-On Wain-Roy Quick Change (XLS)CEMETERY /BELLHOLE
27.0
17.5
18-12 1.5 146 0.75 3 $ 991 CEMETERY /BELLHOLE
1006242-12 2.0 198 0.75 3 $ 97218-18 2.5 180 0.75 4 1,170 1006242-16 3.0 211 0.75 3 1,09118-24 3.7 214 0.75 5 1,323 1006242-18 3.5 225 0.75 4 1,15218-30 4.9 252 0.75 6 1,425 1006242-24 5.0 253 0.75 5 1,30418-36 6.0 291 0.75 7 1,530 1006242-30 6.5 281 0.75 6 1,407
1006242-36 8.0 295 0.75 7 1,511
Gannon Pin-OnReversible
BOCE Wain-Roy Quick Change (XLS)Reversible
BOCE
DITCHING &GRADING
18
25
DGM45-24 4.0 252 Standard $ 1,291 DITCHING &GRADING
18
25
DGM45-24 4.0 238 Standard $ 999
DGM45-30 5.2 298 Standard 1,389 DGM45-30 5.2 283 Standard 1,060
DGM45-36 6.4 354 Standard 1,498 DGM45-36 6.4 338 Standard 1,169
DGM45-42 7.6 403 Standard 1,644 DGM45-42 7.6 388 Standard 1,291
DGM45-48 8.8 454 Standard 1,754 DGM45-48 8.8 438 Standard 1,413
Note: Optional drain holes in side plate or backsheet. Note: Optional drain holes in side plate or backsheet.
COUPLERS
CF Mechanical Quick Latch Style / Description
Wt.(lbs.)
ListPrice CF Direct Pin Style / Description
Wt.(lbs.)
ListPrice
MECHANICALQUICK COUPLER
18
11
Mechanical (with pin kit) 85 $ 2,060
18
11
DIRECT PINCOUPLER Mechanical
(with single pin kit) 54 $ 1,220
Jump latch 2,266 Jump latch 1,343
COUPLER PIN KIT 47 � COUPLER PIN KIT (SINGLE PIN) 15 �
Gannon Eliminator Wain-Roy Quick Change (XLS)MANUAL RELEASE
Manual release (Accepts 025, 026,027 style buckets and attachments)
70 $ 879
MANUAL RELEASEManual release(Fits all Original andXLS style buckets andattachments)
70 $ 879
Rev. 4/9/18
� Call for pricing.
1/8 yard (9,000 to 12,500 lb.) COMPACT EXCAVATOR BUCKETS & COUPLERS
BUCKETS
GannonPin-On
Style /Width
Cap.Cu. Ft.
Wt.(lbs.)
Lip Size(in.)
No.Teeth
ListPrice
Wain-Roy QC(XLS)
Style /Width
Cap.Cu. Ft.
Wt.(lbs.)
Lip Size(in.)
No.Teeth
ListPrice
HEAVY-DUTY
34.8
33.8
HDM45-12 2.5 205 0.75 3 $ 1,084 HEAVY-DUTY
35.0
35.3
HDM45-12 2.5 190 0.75 3 $ 780HDM45-16 3.4 245 0.75 3 1,121 HDM45-16 3.4 214 0.75 3 840HDM45-18 4.2 253 0.75 4 1,145 HDM45-18 4.2 238 0.75 4 865HDM45-24 6.0 302 0.75 5 1,291 HDM45-24 6.0 284 0.75 5 962HDM45-30 8.1 350 0.75 6 1,389 HDM45-30 8.1 330 0.75 6 1,072HDM45-36 10.1 398 0.75 7 1,583 HDM45-36 10.1 374 0.75 7 1,194
Optional Welded Side Cutter Extensions, Add: 174 Optional Welded Side Cutter Extensions, Add: 174
Gannon Pin-On Wain-Roy Quick Change (XLS)CEMETERY /BELLHOLE
27.0
17.5
18-12 1.5 146 0.75 3 $ 991 CEMETERY /BELLHOLE
1006242-12 2.0 198 0.75 3 $ 97218-18 2.5 180 0.75 4 1,170 1006242-16 3.0 211 0.75 3 1,09118-24 3.7 214 0.75 5 1,323 1006242-18 3.5 225 0.75 4 1,15218-30 4.9 252 0.75 6 1,425 1006242-24 5.0 253 0.75 5 1,30418-36 6.0 291 0.75 7 1,530 1006242-30 6.5 281 0.75 6 1,407
1006242-36 8.0 295 0.75 7 1,511
Gannon Pin-OnReversible
BOCE Wain-Roy Quick Change (XLS)Reversible
BOCE
DITCHING &GRADING
18
25
DGM45-24 4.0 252 Standard $ 1,291 DITCHING &GRADING
18
25
DGM45-24 4.0 238 Standard $ 999
DGM45-30 5.2 298 Standard 1,389 DGM45-30 5.2 283 Standard 1,060
DGM45-36 6.4 354 Standard 1,498 DGM45-36 6.4 338 Standard 1,169
DGM45-42 7.6 403 Standard 1,644 DGM45-42 7.6 388 Standard 1,291
DGM45-48 8.8 454 Standard 1,754 DGM45-48 8.8 438 Standard 1,413
Note: Optional drain holes in side plate or backsheet. Note: Optional drain holes in side plate or backsheet.
COUPLERS
CF Mechanical Quick Latch Style / Description
Wt.(lbs.)
ListPrice CF Direct Pin Style / Description
Wt.(lbs.)
ListPrice
MECHANICALQUICK COUPLER
18
11
Mechanical (with pin kit) 150 $ 2,343
18
11
DIRECT PINCOUPLER Mechanical
(with single pin kit) 98 $ 1,258
Jump latch 2,577 Jump latch 1,383
Gannon
Eliminator Wain-Roy Quick Change (XLS)MANUAL RELEASE
Manual release (Accepts 025, 026,027 style buckets and attachments)
70 $ 879
MANUAL RELEASEManual release(Fits all Original andXLS style buckets andattachments)
70 $ 879
Rev. 4/9/18
�
1/4 yard (12,500 to 16,000 LB) COMPACT EXCAVATOR BUCKETS & COUPLERS
BUCKETS
Gannon Pin-On
Style /Width
Cap.Cu. Ft.
Wt.(lbs.)
Lip Size(in.)
No.Teeth
ListPrice
Wain-Roy QC(Original, XLS)
Style /Width
Cap.Cu. Ft.
Wt.(lbs.)
Lip Size(in.)
No.Teeth
ListPrice
EXTRAHEAVY-DUTY
38.5
34.7
HD1-12 3.3 299 1.00 3 $ 1,041 EXTRAHEAVY-DUTY
38.5
37.8
HD1-12 3.3 245 1.00 3 $ 945HD1-16 4.2 330 1.00 3 1,107 HD1-16 4.2 295 1.00 3 1,018HD1-18 5.0 353 1.00 4 1,159 HD1-18 5.0 310 1.00 4 1,055HD1-24 7.2 415 1.00 5 1,314 HD1-20 6.1 347 1.00 4 1,141HD1-30 9.5 470 1.00 5 1,445 HD1-24 7.2 370 1.00 5 1,202HD1-36 11.8 525 1.00 6 1,601 HD1-30 9.5 425 1.00 5 1,325
HD1-36 11.8 475 1.00 6 1,472
Gannon Pin-On Wain-Roy Quick Change (Original, XLS)EXTRA
HEAVY-DUTY
24
29
STR1-12 2.8 250 1.00 3 $ 1,243 EXTRAHEAVY-DUTY
33.9
34.8
STR1-12 2.8 235 1.00 3 $ 1,159STR1-16 3.6 293 1.00 3 1,308 STR1-16 3.6 278 1.00 3 1,220STR1-18 4.2 310 1.00 4 1,360 STR1-18 4.2 295 1.00 4 1,270STR1-24 6.0 364 1.00 5 1,471 STR1-24 6.0 349 1.00 5 1,374STR1-30 7.8 415 1.00 5 1,581 STR1-30 7.8 400 1.00 5 1,478STR1-36 9.7 465 1.00 6 1,711 STR1-36 9.7 450 1.00 6 1,601
Note: Designed for zero tail spin machines. Note: Designed for zero tail spin machines.
Gannon Pin-On Wain-Roy Quick Change (Original, XLS)HIGH CAP. EXTRA
HEAVY-DUTY
43.5
41.2
HC1-12 4.2 338 1.00 3 $ 1,093 HIGH CAP. EXTRAHEAVY-DUTY
44.1
42.2
HC1-12 4.2 298 1.00 3 $ 993
HC1-16 5.6 375 1.00 3 1,159 HC1-16 5.6 335 1.00 3 1,068
HC1-18 6.5 405 1.00 4 1,223 HC1-18 6.5 365 1.00 4 1,104
HC1-24 9.5 480 1.00 5 1,380 HC1-24 9.5 435 1.00 5 1,251
HC1-30 12.5 541 1.00 5 1,524 HC1-30 12.5 486 1.00 5 1,374
HC1-36 15.6 613 1.00 6 1,705 HC1-36 15.6 563 1.00 6 1,534
Gannon Pin-On Wain-Roy Quick Change (Original, XLS)SEVERE-DUTY
38.5
34.7
SD1-12 3.3 321 1.00 3 $ 1,159 SEVERE-DUTY
38.5
37.8
SD1-12 3.3 281 1.00 3 $ 1,079SD1-16 4.2 357 1.00 3 1,223 SD1-16 4.2 317 1.00 3 1,141SD1-18 5.0 375 1.00 4 1,263 SD1-18 5.0 335 1.00 4 1,177SD1-24 7.2 434 1.00 5 1,419 SD1-24 7.2 389 1.00 5 1,325SD1-30 9.5 483 1.00 5 1,562 SD1-30 9.5 443 1.00 5 1,460SD1-36 11.8 547 1.00 6 1,718 SD1-36 11.8 497 1.00 6 1,607
Gannon Pin-OnReversible
BOCE Wain-Roy QC (Original, XLS)Reversible
BOCE
DITCHING &GRADING
21.3
25.5
72N-30 5.3 340 Standard $ 1,528 DITCHING &GRADING
22
23
30 6.1 310 Standard $ 1,34972N-36 7.3 383 Standard 1,610 36 8.1 350 Standard 1,42272N-42 8.8 430 Standard 1,803 42 9.6 390 Standard 1,59572N-48 10.3 456 Standard 1,982 48 11.1 435 Standard 1,75472N-54 11.7 510 Standard 2,202 54 12.5 480 Standard 1,95172N-60 13.2 545 Standard 2,381 60 14.0 525 Standard 2,11072N-72 16.1 628 Standard 2,835 72 17.0 615 Standard 2,514
Note: Optional drain holes in side plate or backsheet. Note: 30” & 36” wide buckets use a different profile.Optional drain holes in side plate or backsheet.
Gannon Pin-OnLip Size
(in.)No.
Teeth Wain-Roy QC (Original, XLS)Lip Size
(in.)No.
Teeth
CEMETERY /BELLHOLE
28.8
19.4
02A-12 1.9 200 1.00 3 $ 1,110 CEMETERY /BELLHOLE
12 2.0 165 1.00 3 $ 1,39502A-18 2.8 250 1.00 4 1,278 16 2.7 185 1.00 3 1,44602A-24 4.2 325 1.00 5 1,446 18 3.0 195 1.00 3 1,47202A-30 5.6 400 1.00 6 1,562 24 4.4 250 1.00 4 1,52402A-36 7.4 450 1.00 7 1,679 30 5.9 285 1.00 6 1,59502A-38 7.9 468 1.00 7 1,808 36 7.3 330 1.00 7 1,66602A-40 8.4 476 1.00 8 1,898
Rev. 4/9/18
1/4 yard (12,500 to 16,000 LB) COMPACT EXCAVATOR BUCKETS & COUPLERS (Continued)
BUCKETS (Continued)
Wain-Roy QC(Original, XLS)
Style /Width
Cap.Cu. Ft.
Wt.(lbs.)
Lip Size(in.)
No.Teeth
ListPrice
RIPPER 12 3.2 305 1.00 3 $ 2,343
16 4.3 340 1.00 5 2,551
18 4.9 356 1.00 5 2,619
24 6.5 405 1.00 5 2,907
Note: Bucket sizes shown are nominal. The Ripper Bucket will cut approximately 2 inches more than the nominal advertised width.
�
COUPLERS
CF Mechanical Quick Latch Style / Description
Wt.(lbs.)
ListPrice CF Direct Pin Style / Description
Wt.(lbs.)
ListPrice
MECHANICALQUICK COUPLER
18
11
Mechanical (with pin kit) 165 $ 2,472
18
11
DIRECT PINCOUPLER Mechanical
(with single pin kit) 125 $ 1,391
Jump latch 2,671 Jump latch 1,528
� Gannon
Eliminator Wain-Roy Quick Change (XLS)MANUAL RELEASE Manual release
(Fits all Original stylebuckets and attachments,also accepts 030 stylebuckets and attachments)
198 $ 1,146
MANUAL RELEASEManual release (Fits all Original and XLS style buckets and attachments)
150 $ 1,146
Wain-Roy Quick Change (XLS) Wain-Roy Quick Change (XLS)HYDRAULIC RELEASE Hydraulic coupler,
pin kit and selectedcomponents(Fits all Original and XLS style buckets and attachments)
175 $ 3,435
SWINGER W/ MANUAL BUCKET RELEASE Manual release
swinger coupler(Fits all Original and XLS style buckets and attachments)
240 $ 3,557
Note: Hydraulic components include valve, switch box & wiring, and hoses &connections between our valve & cylinder. Dealer is responsible for hosesfrom valve to drain (tank) and to the bucket cylinder for power.
Note: Dealer-supplied hydraulics. When providing the valve, controls & lines, besure to use two 3450 PSI relief valves. The Hydraulic Swinger Coupler is 18 inches wide. Digging depth is limited when a narrower bucket is used.
Wain-Roy Direct PinSWINGER COUPLER W/DIRECT
PIN COUPLER INTERFACE
Mechanical, with single pin kit 240 $ 3,557
Rev. 4/9/18
COMPACT EXCAVATOR ATTACHMENTS & SPECIALTY BUCKETS
SPECIALTY BUCKETS & ATTACHMENTS
Weight ClassWain-Roy Pin-On
Style /Width
Cap.Cu. Ft.
Wt.(lbs.)
Opening(in.)
ListPrice
Wain-Roy QC(Original, XLS)
Style /Width
Cap.Cu. Ft.
Wt.(lbs.)
Opening(in.)
ListPrice
1/4 yd.(12.5K – 16K)
JAW24 7.6 660 41 $ 6,727
JAW24 7.6 650 41 $ 6,648
30 9.7 740 41 7,421 30 9.7 730 41 7,359
Note: For Hydraulic Kit availability & pricing, contact Dealer Services. If you are providing the valve, controls & lines, be sure to use two 3450 PSI relief valves.
Wain-Roy Wain-Roy
1/4 yd.(12.5K – 16K)
RIPPER TOOTHJAW ATTACHMENT
180 $ 1,177
5’ BACKFILL BLADEJAW ATTACHMENT
60 165 $ 1,312
Weight Class Wain-Roy Pin-OnStyle /Width
Cap.Cu. Ft.
Wt.(lbs.)
ListPrice Wain-Roy QC (XLS)
Style /Width
Cap.Cu. Ft.
Wt.(lbs.)
ListPrice
1/8 yd.(9K – 12.5K)
HDM45
TILTING BUCKET 24 4.0 470 $ 3,986 TILTING BUCKET 24 4.0 440 $ 3,802
36 6.2 530 4,201 36 6.2 500 4,022
42 7.6 560 4,354 42 7.6 527 4,171
48 8.8 560 4,477 48 8.8 557 4,292
1/4 yd.(12.5K – 16K)
HD1
TILTING BUCKET48 11.9 865 6,127
TILTING BUCKET48 11.9 788 5,881
60 15.1 1010 6,457 60 15.1 928 6,212
Note: 45� rotation. Bolt-on edge standard. Compact excavator must be equipped with valve and lines down to end of dipperstick. Valve must have port reliefs.
CF Pin-OnNo.
Teeth Wain-Roy QC (Original, XLS)No.
Teeth
1/4 yd. *(12.5K – 16K)
PAVEMENT SLABREMOVAL 18 3 560 $ 2,900
PAVEMENT SLABREMOVAL 18 4 540 $ 2,865
24 4 596 3,071 24 4 575 3,044
30 5 634 3,244 30 5 610 3,223
Note: See compact excavator buckets, specific weight class section for tooth options available.
*
Gannon Pin-On Wain-Roy Quick Change (Original, XLS)
1/4 yd.(12.5K – 16K)
RAILROAD / CRIBBING
RR-8 2 205 $ 1,399
RAILROAD / CRIBBING
8 2 190 $ 1,392
Note: See compact excavator buckets, specific weight class section for tooth options available.
Rev. 4/9/18
COMPACT EXCAVATOR ATTACHMENTS & SPECIALTY BUCKETS (Continued)
SPECIALTY BUCKETS & ATTACHMENTS (Continued)
Weight ClassWain-Roy QC (Original, XLS) **
Style /Width
Cap.Cu. Ft.
Wt.(lbs.)
ListPrice
Wain-Roy QC (Original, XLS) **
Style /Width
Wt.(lbs.)
ListPrice
1/4 yd. *(12.5K – 16K)
“V” DITCHINGBUCKET
12 x 56 x45� 2 365 $ 1,717
5’ GRADING &BACKFILL BLADE
60 165 $ 1,460
Note: See compact excavator buckets, specific weight class section for tooth options available.
*
CF Pin-On Teeth Wain-Roy QC (Original, XLS) Teeth
1/8 yd. (4.5K – 9K)RIPPER TOOTH 199 $ 1,349
RIPPER TOOTH1003035 106 $ 1,338
1/8 yd. (9K – 12.5K) 199 1,349 1003035 106 1,338
1/4 yd. (12.5K – 16K) 009004 225 1,595 1005129 220 1,582
THUMBS (MATERIAL CLAMPS)
Weight Class CF Pin-OnWt.
(lbs.)List
PriceWain-Roy Quick Change
Wt.(lbs.)
ListPrice
Wain-Roy Quick Change
Wt.(lbs.)
ListPrice
1/8 yd. (4.5K – 9K) HDM30WELD-ON RIGID
118 $ 1,104WELD-ON HYDRAULIC
125 $ 1,877HYDRAULIC DIRECT,MAIN PIN (NO LINKS)
CUSTOMDESIGN
125 $ 2,478
1/8 yd. (9K – 12.5K) HDM45 187 1,828 220 2,993 190 2,674
1/4 yd. (12.5K – 16K) HD1 187 1,828 220 2,993 350 3,446
GRAPPLES
Weight ClassWain-Roy QC(Original, XLS) Opening (in.)
Width AcrossTeeth (in.)
Wt.(lbs.)
ListPrice
Wain-Roy QC(Original, XLS)
Opening(in.)
Width AcrossTeeth (in.)
Wt.(lbs.)
ListPrice
1/4 yd.(12.5K – 16K)
HYDRAULIC58 24 605 $ 5,899
RIGID60 24 695 $3,164
Includes Anchor Mounting Kit
If used w/Swinger, Lockout Kit is required, P/N 108621 215
Rev. 4/9/18
CASECX75, CX80
DEERE/HITACHI75, 85
KOMATSUPC88, PC95
TAKEUCHITB180
TEREXTW85
VOLVOECR88
9MT (16,000 to 22,000 LB) EXCAVATOR BUCKETS & COUPLERS
BUCKETS
GannonPin-On
Style /Width
Cap.Cu. Yd.
Wt.(lbs.)
Lip Size(in.)
No.Teeth
ListPrice
Wain-RoyQuick Change(Original, XLS)
Style /Width
Cap.Cu. Yd.
Wt.(lbs.)
Lip Size(in.)
No.Teeth
ListPrice
HEAVY-DUTY
32
38
HD2-16 0.27 547 1.25 3 $ 1,989 HEAVY-DUTY
32
38
HD2-16 0.27 535 1.25 3 $ 1,877
HD2-18 0.30 592 1.25 3 2,029 HD2-18 0.30 575 1.25 3 1,923
HD2-24 0.46 708 1.25 4 2,311 HD2-24 0.46 685 1.25 4 2,183
HD2-30 0.59 819 1.25 5 2,505 HD2-30 0.59 785 1.25 5 2,367
HD2-36 0.72 896 1.25 6 2,724 HD2-36 0.72 860 1.25 6 2,576
HD2-42 0.86 1058 1.25 6 2,956 HD2-42 0.86 939 1.25 6 2,796
HD2-48 1.01 1086 1.25 8 3,175 HD2-48 1.01 1015 1.25 8 3,005
CF Pin-OnReversible 0.75” BOCE,
Add: Wain-Roy Quick Change (Original, XLS)Reversible
BOCE
DITCHING &GRADING
35.4
36.8
3LD-36 0.48 425 1.00 $ 338 $ 1,875 DITCHING &GRADING
33
28
36 0.49 710 Standard $ 2,097
3LD-42 0.57 461 1.00 363 2,058 48 0.67 740 Standard 2,698
3LD-48 0.66 497 1.00 387 2,270 60 0.81 820 Standard 3,239
3LD-54 0.76 528 1.00 399 2,494
3LD-60 0.85 559 1.00 423 2,731
Note: Optional drain holes in side plate or backsheet.
Rev. 4/9/18
9MT (16,000 to 22,000 LB) EXCAVATOR BUCKETS & COUPLERS (Continued)
COUPLERS
CF Mechanical Quick Latch Style / DescriptionWt.
(lbs.)List
Price CF Direct Pin Style / DescriptionWt.
(lbs.)List
Price
MECHANICALQUICK COUPLER
23
13
Mechanical (with pin kit) 185 $ 2,752
23
13
DIRECT PINCOUPLER Mechanical
(with single pin kit) 165 $ 1,414
Jump latch 3,027 Jump latch 1,555
� Gannon
Eliminator Wain-Roy QC (XLS)
MANUAL RELEASE
Manual release (Fits all Original style buckets andattachments)
299 $ 2,171
MANUAL RELEASE
Manual release (Fits all Original andXLS style buckets and attachments)
303 $ 2,171
Wain-Roy Quick Change (XLS) Wain-Roy Quick Change (XLS)
HYDRAULIC RELEASE Hydraulic coupler, pin kit and selectedcomponents(Fits all Original andXLS style buckets and attachments)
330 $ 4,907
MANUAL RELEASE SWINGERManual releaseswinger coupler(Fits all Original andXLS style buckets and attachments)
400 $ 6,501
Note: Hydraulic components include valve, switch box & wiring, and hoses &connections between our valve & cylinder. Dealer is responsible for hosesfrom valve to drain (tank) and to the bucket cylinder for power.
Note: Dealer-supplied hydraulics. When providing the valve, controls & lines, besure to use two 3450 PSI relief valves. The Hydraulic Swinger Coupler is 20 inches wide. Digging depth is limited when a narrower bucket is used.
Wain-Roy Direct PinSWINGER COUPLER W/DIRECT
PIN COUPLER INTERFACE
Mechanical, with single pin kit 400 $ 6,501
TOOTH STYLES
HensleyGeneric
Additional Tooth Availability (Price per Tooth)
Edge Size Standard Hensley CAT Esco Metalogenia
1.00” Manufacturer Specified Teeth & Adapter — X160 $ 29 1U3202 $ 29 V19SYL $ 31 MG15U $ 36
1.25”Upgrade Manufacturer Specified Teeth & Adapter $ 7 X220 $ 39 1U3302 $ 70 V23SYL $ 62 MG15U $ 44
Rev. 4/9/18
CASECX130, CX135
CATERPILLAR311, 312
DEERE/HITACHI120, 135
KOMATSUPC130
TEREXTW110, TW130
VOLVOEC140
12MT (22,000 to 30,000 LB) EXCAVATOR BUCKETS & COUPLERS
CF Pin-On Style / WidthCap.
Cu. Yd.Wt.
(lbs.)Lip Size
(in.)No.
TeethList
Price CF Pin-On Style / WidthCap.
Cu. Yd.Wt.
(lbs.)Lip Size
(in.)No.
TeethList
Price
STANDARDCAPACITY
HEAVY-DUTY
43.6
50.5
CF120X150-18 0.29 714 1.25 3 $ 2,932 HIGHCAPACITY
HEAVY-DUTY
55.2
52.0
CF125X150-18 0.33 980 1.25 3 $ 3,825
CF120X150-20 0.33 792 1.25 3 3,052 CF125X150-20 0.38 1025 1.25 3 4,069
CF120X150-24 0.42 893 1.25 4 3,298 CF125X150-24 0.49 1114 1.25 4 4,199
CF120X150-30 0.57 1066 1.25 4 3,683 CF125X150-30 0.66 1151 1.25 4 4,437
CF120X150-36 0.73 1081 1.25 5 3,949 CF125X150-36 0.83 1261 1.25 5 4,930
CF120X150-42 0.88 1230 1.25 5 4,431 CF125X150-42 1.01 1390 1.25 5 5,666
CF120X150-48 1.04 1312 1.25 6 4,749 CF125X150-48 1.19 1499 1.25 6 5,966
STD. CAPACITYEXTRA
HEAVY-DUTY
43.6
50.5
CF120X250-18 0.29 792 1.25 3 $ 3,144 HIGH CAPACITYEXTRA
HEAVY-DUTY
55.2
52.0
CF125X250-18 0.33 993 1.25 3 $ 4,081
CF120X250-20 0.33 835 1.25 3 3,275 CF125X250-20 0.38 1055 1.25 3 4,186
CF120X250-24 0.42 938 1.25 4 3,535 CF125X250-24 0.49 1364 1.25 4 4,396
CF120X250-30 0.57 1059 1.25 4 3,877 CF125X250-30 0.66 1472 1.25 4 4,787
CF120X250-36 0.73 1141 1.25 5 4,197 CF125X250-36 0.83 1570 1.25 5 5,225
CF120X250-42 0.88 1299 1.25 5 4,774 CF125X250-42 1.01 1651 1.25 5 5,881
CF120X250-48 1.04 1441 1.25 6 5,078 CF125X250-48 1.19 1689 1.25 6 6,081
STD. CAPACITYSEVERE-DUTY
43.6
50.5
CF120X350-18 0.29 1179 1.50 3 $ 3,746 HIGH CAPACITYSEVERE-DUTY
55.2
52.0
CF125X350-18 0.33 1509 1.50 3 $ 5,069
CF120X350-20 0.33 1205 1.50 3 3,886 CF125X350-20 0.38 1554 1.50 3 5,363
CF120X350-24 0.42 1295 1.50 3 4,171 CF125X350-24 0.49 1645 1.50 3 5,631
CF120X350-30 0.57 1411 1.50 4 4,525 CF125X350-30 0.66 1761 1.50 4 6,079
CF120X350-36 0.73 1481 1.50 5 4,865 CF125X350-36 0.83 1790 1.50 5 6,225
CF120X350-42 0.88 1727 1.50 5 5,505 CF125X350-42 1.01 1830 1.50 5 7,013
CF120X350-48 1.04 1959 1.50 6 5,794 CF125X350-48 1.19 2309 1.50 6 7,475
Wain-Roy Quick Change (Original, XLS) Wain-Roy Quick Change (Original, XLS)HEAVY-DUTY
44
38
HD3-18 0.33 698 1.25 3 $ 2,870 SEVERE-DUTY
44
38
SD3-18 0.33 715 1.25 3 $ 3,561
HD3-24 0.49 813 1.25 4 3,320 SD3-24 0.49 834 1.25 4 4,011
HD3-30 0.66 901 1.25 4 3,532 SD3-30 0.66 926 1.25 4 4,344
HD3-36 0.83 1011 1.25 5 3,819 SD3-36 0.83 1040 1.25 5 4,741
HD3-42 1.00 1129 1.25 6 4,480 SD3-42 1.00 1156 1.25 6 5,511
HD3-48 1.18 1213 1.25 6 4,693 SD3-48 1.18 1249 1.25 6 5,845
Optional Bolt-On Side Cutter Extensions, Add: 784
CF Pin-OnReversible 1.00” BOCE,
Add: Wain-Roy Quick Change (Original, XLS)Reversible
BOCE
DITCHING &GRADING
39.5
37.3
1DXS-42 0.62 786 1.00 $ 542 $ 3,137 DITCHING &GRADING
33
28
36 0.49 710 Standard $ 2,097
1DXS-48 0.73 848 1.00 567 3,385 48 0.67 740 Standard 2,698
1DXS-54 0.83 905 1.00 605 3,619 60 0.81 820 Standard 3,239
1DXS-60 0.94 963 1.00 630 3,867 72 1.00 935 Standard 3,544
1DXS-72 1.15 1084 1.00 668 4,596
Note: Optional drain holes in side plate or backsheet.
Rev. 4/9/18
X150 Bucket: Heavier design than most OEM standard buckets. For use in soils containing low percentages of rock, loam and sand.
X250 Bucket: More demanding excavating conditions in clay,gravel, compacted soils and loose rock.
X350 Bucket: Abrasive and high impact applications in shot rock,coral, stratified materials, caliche and highly compacted material.
Bucket Capacities: Bucket capacities are based on IndustryStandard SAE J296 Heaped Capacity; bucket teeth are notincluded in this capacity calculation. For a bucket with teeth add:
� Bucket Capacity with Standard Teeth: Multiply listed bucket capacity x 1.05 (5%)
� Bucket Capacity with Flared Teeth: Multiply listed bucket capacity x 1.15 (15%)
12MT (22,000 to 30,000 LB) EXCAVATOR BUCKETS & COUPLERS (Continued)
COUPLERS
CF Pin Grabber Style / DescriptionWt.
(lbs.)List
Price CF Pin Grabber Style / DescriptionWt.
(lbs.)List
PriceQUICK-LATCHHYDRAULIC
19.4
29.8 5.5
Hydraulic (with latch,hydraulic kit and pinkit), includes “D-Ring”
725 $ 7,052
QUICK-LATCHMECHANICAL
6.928.1
13.5
Mechanical (with pinkit), includes “D-Ring” 570 $ 5,902
Jump latch 7,759 Jump latch 6,492
� Gannon
Eliminator Wain-Roy QC (XLS)MANUAL RELEASE
Manual release (Fits all Original style buckets andattachments)
299 $ 2,171
MANUAL RELEASE
Manual release (Fits all Original andXLS style buckets and attachments)
303 $ 2,171
Wain-Roy Quick Change (XLS) Wain-Roy Quick Change (XLS)HYDRAULIC RELEASE Hydraulic coupler,
pin kit and selectedcomponents(Fits all Original andXLS style buckets and attachments)
360 $ 5,151
MANUAL RELEASE SWINGERManual releaseswinger coupler(Fits all Original andXLS style buckets and attachments)
400 $ 6,501
Note: Hydraulic components include valve, switch box & wiring, and hoses &connections between our valve & cylinder. Dealer is responsible for hosesfrom valve to drain (tank) and to the bucket cylinder for power.
Note: Dealer-supplied hydraulics. When providing the valve, controls & lines, besure to use two 3450 PSI relief valves. The Hydraulic Swinger Coupler is 20 inches wide. Digging depth is limited when a narrower bucket is used.
OPTIONS AND ADDITIONS TO BASE BUCKET (“D-Ring” bucket lifting eye and horizontal wear bars are standard)
DescriptionList
Price DescriptionList
Price
Vertical wear bars N/C Central Fabricators 6” side cutters (3 bolt) $ 759
“Anti-clatter” bushing assembly $ 277 Central Fabricators 3” wear shrouds (3 bolt) 653
Ear blanks 1,124
TOOTH STYLES
HensleyGeneric
Additional Tooth Availability (Price per Tooth)
Edge Size Standard Hensley CAT Esco Metalogenia
1.25” Manufacturer Specified Teeth & Adapter — X220 $ 32 1U3302 $ 65 V23SYL $ 56 MG15U $ 37
1.50” Manufacturer Specified Teeth & Adapter — X290 $ 41 1U3351 $ 61 V29SYL $ 36MG20U $ 52
MG30U $ 100
1.50”Upgrade
Manufacturer Specified Teeth & Adapter $ 13 X290 $ 54 1U3351 $ 73 V29SYL $ 49MG20U $ 65
MG30U $ 113
Rev. 4/9/18
CASECX160
CATERPILLAR314, 315
DEERE/HITACHI160
KOMATSUPC138, PC160
TEREXTXC140, TW150
VOLVOEC160, EW160
15MT (30,000 to 41,000 LB) EXCAVATOR BUCKETS & COUPLERS
CF Pin-On Style / WidthCap.
Cu. Yd.Wt.
(lbs.)Lip Size
(in.)No.
TeethList
Price CF Pin-On Style / WidthCap.
Cu. Yd.Wt.
(lbs.)Lip Size
(in.)No.
TeethList
Price
55.2
52.0
STANDARDCAPACITY
HEAVY-DUTY
CF150X150-18 0.34 732 1.25 3 $ 3,619
60.1
56.5
HIGHCAPACITY
HEAVY-DUTY
CF155X150-18 0.37 1005 1.25 4 $ 4,119
CF150X150-20 0.42 816 1.25 3 3,881 CF155X150-20 0.45 1045 1.25 4 4,250
CF150X150-24 0.50 900 1.25 4 4,181 CF155X150-24 0.54 1101 1.25 4 4,369
CF150X150-30 0.66 1068 1.25 4 4,355 CF155X150-30 0.73 1182 1.25 4 4,792
CF150X150-36 0.83 1096 1.25 5 4,781 CF155X150-36 0.92 1276 1.25 5 5,223
CF150X150-42 1.01 1238 1.25 5 5,578 CF155X150-42 1.12 1411 1.25 5 5,841
CF150X150-48 1.18 1387 1.25 6 5,929 CF155X150-48 1.31 1499 1.25 6 6,203
55.2
52.0
STD. CAPACITYEXTRA
HEAVY-DUTY
CF150X250-18 0.34 787 1.25 3 $ 3,744
60.1
56.5
HIGH CAPACITYEXTRA
HEAVY-DUTY
CF155X250-18 0.37 1270 1.25 3 $ 4,369
CF150X250-20 0.42 842 1.25 3 3,969 CF155X250-20 0.45 1320 1.25 3 4,393
CF150X250-24 0.50 942 1.25 4 4,206 CF155X250-24 0.54 1390 1.25 4 4,493
CF150X250-30 0.66 1097 1.25 4 4,555 CF155X250-30 0.73 1471 1.25 4 4,880
CF150X250-36 0.83 1198 1.25 5 4,980 CF155X250-36 0.92 1574 1.25 5 5,318
CF150X250-42 1.01 1312 1.25 5 5,791 CF155X250-42 1.12 1687 1.25 5 6,140
CF150X250-48 1.18 1490 1.25 6 6,140 CF155X250-48 1.31 1869 1.25 6 6,503
55.2
52.0
STD. CAPACITYSEVERE-DUTY
CF150X350-18 0.34 1183 1.50 3 $ 4,381
60.1
56.5
HIGH CAPACITYSEVERE-DUTY
CF155X350-18 0.37 1673 1.50 3 $ 4,977
CF150X350-20 0.42 1255 1.50 3 4,493 CF155X350-20 0.45 1693 1.50 3 5,118
CF150X350-24 0.50 1299 1.50 3 4,943 CF155X350-24 0.54 1720 1.50 3 5,404
CF150X350-30 0.66 1415 1.50 4 5,392 CF155X350-30 0.73 1777 1.50 4 5,828
CF150X350-36 0.83 1493 1.50 5 5,841 CF155X350-36 0.92 1809 1.50 5 6,315
CF150X350-42 1.01 1730 1.50 5 6,290 CF155X350-42 1.12 1862 1.50 5 7,401
CF150X350-48 1.18 1960 1.50 6 6,740 CF155X350-48 1.31 2350 1.50 6 8,050
Wain-Roy Quick Change (Original, XLS) Wain-Roy Quick Change (Original, XLS)HEAVY-DUTY
42
50
HD4-24 0.55 1139 1.50 3 $ 4,954
39
49
HIGH CAPACITYHEAVY-DUTY
STR4-30 0.66 1102 1.25 4 $ 6,203
HD4-30 0.75 1315 1.50 4 5,380 STR4-36 0.83 1230 1.25 5 6,415
HD4-36 0.95 1435 1.50 5 5,578 STR4-42 1.01 1358 1.25 5 6,827
HD4-42 1.16 1629 1.50 5 6,004 STR4-48 1.19 1511 1.25 6 7,239
HD4-48 1.34 1805 1.50 6 6,415
Optional Bolt-On Side Cutter Extensions, Add: 699
CF Pin-OnReversible 1.00” BOCE,
Add: Wain-Roy Quick Change (Original, XLS)Reversible
BOCE
DITCHING &GRADING
39.5
37.3
1DXS-42 0.62 781 1.00 $ 568 $ 4,000 DITCHING &GRADING
36 0.50 1025 Standard $ 3,557
1DXS-48 0.73 847 1.00 586 4,010 42 0.60 1050 Standard 3,769
1DXS-54 0.83 907 1.00 616 4,335 48 0.75 1080 Standard 3,969
1DXS-60 0.94 959 1.00 635 4,560 54 0.87 1095 Standard 4,181
1DXS-72 1.15 1087 1.00 676 4,835 60 1.00 1110 Standard 4,393
72 1.13 1220 Standard 4,992
Note: Optional drain holes in side plate or backsheet.
Rev. 4/9/18
X150 Bucket: Heavier design than most OEM standard buckets. For use in soils containing low percentages of rock, loam and sand.
X250 Bucket: More demanding excavating conditions in clay,gravel, compacted soils and loose rock.
X350 Bucket: Abrasive and high impact applications in shot rock,coral, stratified materials, caliche and highly compacted material.
Bucket Capacities: Bucket capacities are based on IndustryStandard SAE J296 Heaped Capacity; bucket teeth are notincluded in this capacity calculation. For a bucket with teeth add:
� Bucket Capacity with Standard Teeth: Multiply listed bucket capacity x 1.05 (5%)
� Bucket Capacity with Flared Teeth: Multiply listed bucket capacity x 1.15 (15%)
15MT (30,000 to 41,000 LB) EXCAVATOR BUCKETS & COUPLERS (Continued)
COUPLERS
CF Pin Grabber Style / DescriptionWt.
(lbs.)List
Price CF Pin Grabber Style / DescriptionWt.
(lbs.)List
PriceQUICK-LATCHHYDRAULIC
20.0
32.2 5.5
Hydraulic (with latch,hydraulic kit and pinkit), includes “D-Ring”
870 $ 7,744
QUICK-LATCHMECHANICAL
6.931.9
19.8
Mechanical (with pinkit), includes “D-Ring” 635 $ 6,248
Jump latch 8,518 Jump latch 6,874
Wain-Roy Quick Change (XLS)MANUAL RELEASE
Manual release(Fits all Original andXLS style buckets and attachments)
645 $ 4,637
Wain-Roy Quick Change (XLS) Wain-Roy Quick Change (XLS)HYDRAULIC RELEASE
Hydraulic coupler, pin kit and selectedcomponents(Fits all Original andXLS style buckets and attachments)
675 $ 6,525
SWINGER W/ MANUAL BUCKET RELEASE
Manual releaseswinger coupler(Fits all Original andXLS style buckets and attachments)
950 $ 10,414
Note: Hydraulic components include valve, switch box & wiring, and hoses &connections between our valve & cylinder. Dealer is responsible for hosesfrom valve to drain (tank) and to the bucket cylinder for power.
Note: Dealer-supplied hydraulics. When providing the valve, controls & lines, besure to use two 3450 PSI relief valves. The Hydraulic Swinger Coupler is 24 inches wide. Digging depth is limited when a narrower bucket is used.
OPTIONS AND ADDITIONS TO BASE BUCKET(“D-Ring” bucket lifting eye and horizontal wear bars are standard)
DescriptionList
Price DescriptionList
Price
Vertical wear bars N/C Central Fabricators 6” side cutters (3 bolt) $ 759
“Anti-clatter” bushing assembly $ 277 Central Fabricators 3” wear shrouds (3 bolt) 653
Ear blanks 1,401
TOOTH STYLES
HensleyGeneric
Additional Tooth Availability (Price per Tooth)
Edge Size Standard Hensley CAT Esco Metalogenia
1.25” Manufacturer Specified Teeth & Adapter — X220 $ 32 1U3302 $ 65 V23SYL $ 56 MG15U $ 37
1.50” Manufacturer Specified Teeth & Adapter — X290 $ 41 1U3351 $ 61 V29SYL $ 36MG20U $ 52
MG30U $ 100
1.50”Upgrade
Manufacturer Specified Teeth & Adapter $ 13 X290 $ 54 1U3351 $ 73 V29SYL $ 49MG20U $ 65
MG30U $ 113
Rev. 4/9/18
CASECX210, CX225
CATERPILLAR319, 320, 321
DEERE/HITACHI190, 200, 225
KOMATSUPC200, PC228
TEREXTC210, TXC225
VOLVOEW180, EC210
20MT (41,000 to 52,000 LB) EXCAVATOR BUCKETS & COUPLERS
CF Pin-On Style / WidthCap.
Cu. Yd.Wt.
(lbs.)Lip Size
(in.)No.
TeethList
Price CF Pin-On Style / WidthCap.
Cu. Yd.Wt.
(lbs.)Lip Size
(in.)No.
TeethList
Price
60.1
56.5
STANDARDCAPACITY
HEAVY-DUTY
CF200X150-24 0.54 1112 1.50 4 $ 5,079
65.0
58.8
HIGHCAPACITY
HEAVY-DUTY
CF205X150-24 0.60 1289 1.50 4 $ 5,291
CF200X150-30 0.73 1227 1.50 4 5,554 CF205X150-30 0.81 1391 1.50 4 6,040
CF200X150-36 0.92 1350 1.50 5 5,977 CF205X150-36 1.02 1451 1.50 5 6,477
CF200X150-42 1.12 1490 1.50 5 6,415 CF205X150-42 1.23 1596 1.50 5 6,764
CF200X150-48 1.31 1586 1.50 6 6,976 CF205X150-48 1.45 1785 1.50 6 7,401
CF200X150-54 1.51 1720 1.50 6 7,364 CF205X150-54 1.66 2045 1.50 6 7,776
CF200X150-60 1.70 1980 1.50 7 8,100 CF205X150-60 1.88 2305 1.50 7 8,824
60.1
56.5
STD. CAPACITYEXTRA
HEAVY-DUTY
CF200X250-24 0.54 1373 1.50 4 $ 5,416
65.0
58.8
HIGH CAPACITYEXTRA
HEAVY-DUTY
CF205X250-24 0.60 1425 1.50 4 $ 5,852
CF200X250-30 0.73 1481 1.50 4 5,866 CF205X250-30 0.81 1531 1.50 4 6,253
CF200X250-36 0.92 1573 1.50 5 6,091 CF205X250-36 1.02 1651 1.50 5 6,602
CF200X250-42 1.12 1699 1.50 5 6,540 CF205X250-42 1.23 1728 1.50 5 6,902
CF200X250-48 1.31 1793 1.50 6 6,989 CF205X250-48 1.45 1853 1.50 6 7,451
CF200X250-54 1.51 1903 1.50 6 7,439 CF205X250-54 1.66 1965 1.50 6 7,975
CF200X250-60 1.70 2018 1.50 7 8,337 CF205X250-60 1.88 2075 1.50 7 9,148
60.1
56.5
STD. CAPACITYSEVERE-DUTY
CF200X350-24 0.54 1658 1.50 3 $ 6,300
65.0
58.8
HIGH CAPACITYSEVERE-DUTY
CF205X350-24 0.60 1695 1.50 3 $ 7,204
CF200X350-30 0.73 1760 1.50 4 6,552 CF205X350-30 0.81 1805 1.50 4 7,627
CF200X350-36 0.92 1859 1.50 4 6,995 CF205X350-36 1.02 1943 1.50 4 8,036
CF200X350-42 1.12 2029 1.50 5 7,878 CF205X350-42 1.23 2089 1.50 5 8,400
CF200X350-48 1.31 2197 1.50 5 8,190 CF205X350-48 1.45 2305 1.50 5 9,428
CF200X350-54 1.51 2365 1.50 6 8,528 CF205X350-54 1.66 2410 1.50 6 9,990
CF200X350-60 1.70 2478 1.50 7 9,066 CF205X350-60 1.88 2560 1.50 7 10,586
Wain-Roy Quick Change (Original, XLS) Wain-Roy Quick Change (Original, XLS)HEAVY-DUTY
42
50
HD4-24 0.55 1139 1.50 3 $ 4,954
46
52
HIGH CAPACITYHEAVY-DUTY
HD5-24 0.66 1205 1.50 3 $ 5,691
HD4-30 0.75 1315 1.50 4 5,380 HD5-30 0.90 1370 1.50 4 6,096
HD4-36 0.95 1435 1.50 5 5,578 HD5-36 1.14 1535 1.50 5 6,305
HD4-42 1.16 1629 1.50 5 6,004 HD5-42 1.38 1690 1.50 5 6,709
HD4-48 1.34 1805 1.50 6 6,415 HD5-48 1.63 1845 1.50 6 7,114
Optional Bolt-On Side Cutter Extensions, Add: 699 Optional Bolt-On Side Cutter Extensions, Add: 770
CF Pin-OnReversible 1.00” BOCE,
Add: Wain-Roy Quick Change (Original, XLS)Reversible
BOCE
DITCHING &GRADING
39.5
37.3
1DXH-42 0.62 866 1.00 $ 568 $ 4,019 DITCHING &GRADING
42 0.60 1050 Standard $ 3,769
1DXH-48 0.73 996 1.00 586 4,031 48 0.75 1080 Standard 3,969
1DXH-54 0.84 1126 1.00 616 4,321 54 0.87 1095 Standard 4,181
3LDLF-54 0.76 770 1.00 616 4,354 60 1.00 1110 Standard 4,393
3LDLF-60 0.85 815 1.25 635 4,410 72 1.13 1220 Standard 4,992
1DXH-60 0.94 1256 1.00 635 4,581
1DXH-72 1.15 1295 1.00 676 4,857
Note: Optional drain holes in side plate or backsheet.
Rev. 4/9/18
X150 Bucket: Heavier design than most OEM standard buckets. For use in soils containing low percentages of rock, loam and sand.
X250 Bucket: More demanding excavating conditions in clay,gravel, compacted soils and loose rock.
X350 Bucket: Abrasive and high impact applications in shot rock,coral, stratified materials, caliche and highly compacted material.
Bucket Capacities: Bucket capacities are based on IndustryStandard SAE J296 Heaped Capacity; bucket teeth are notincluded in this capacity calculation. For a bucket with teeth add:
� Bucket Capacity with Standard Teeth: Multiply listed bucket capacity x 1.05 (5%)
� Bucket Capacity with Flared Teeth: Multiply listed bucket capacity x 1.15 (15%)
20MT (41,000 to 52,000 LB) EXCAVATOR BUCKETS & COUPLERS (Continued)
COUPLERS
CF Pin Grabber Style / DescriptionWt.
(lbs.)List
Price CF Pin Grabber Style / DescriptionWt.
(lbs.)List
PriceQUICK-LATCHHYDRAULIC
21.1
34.5 5.5
Hydraulic (with latch,hydraulic kit and pinkit), includes “D-Ring”
925 $ 8,332
QUICK-LATCHMECHANICAL
6.533.5
18.2
Mechanical (with pinkit), includes “D-Ring” 680 $ 6,498
Jump latch 9,164 Jump latch 7,149
Wain-Roy Quick Change (XLS)
�
MANUAL RELEASE
Manual release(Fits all Original andXLS style buckets and attachments)
645 $ 4,637
�
Wain-Roy Quick Change (XLS) Wain-Roy Quick Change (XLS)HYDRAULIC RELEASE
Hydraulic coupler, pin kit and selectedcomponents(Fits all Original andXLS style buckets and attachments)
675 $ 6,525
SWINGER W/ MANUAL BUCKET RELEASE
Manual releaseswinger coupler(Fits all Original andXLS style buckets and attachments)
950 $ 10,414
Note: Hydraulic components include valve, switch box & wiring, and hoses &connections between our valve & cylinder. Dealer is responsible for hosesfrom valve to drain (tank) and to the bucket cylinder for power.
Note: Dealer-supplied hydraulics. When providing the valve, controls & lines, besure to use two 3450 PSI relief valves. The Hydraulic Swinger Coupler is 24 inches wide. Digging depth is limited when a narrower bucket is used.
OPTIONS AND ADDITIONS TO BASE BUCKET(“D-Ring” bucket lifting eye and horizontal wear bars are standard)
DescriptionList
Price DescriptionList
Price
Vertical wear bars N/C Central Fabricators 6” side cutters (3 bolt) $ 759
“Anti-clatter” bushing assembly $ 277 Central Fabricators 3” wear shrouds (3 bolt) 653
Ear blanks 1,716
TOOTH STYLES
HensleyGeneric
Additional Tooth Availability (Price per Tooth)
Edge Size Standard Hensley CAT Esco Metalogenia
1.50” Manufacturer Specified Teeth & Adapter — X290 $ 41 1U3351 $ 61 V29SYL $ 36MG20U $ 52
MG30U $ 100
2.00”Upgrade Manufacturer Specified Teeth & Adapter $ 32 X400 $ 114 9W8452 $ 180 V39SYL $ 95 MG40U $ 162
Rev. 4/9/18
CASECX240, CX290
CATERPILLAR324, 329
DEERE/HITACHI240, 270
KOMATSUPC220, PC270
TEREXTXC255, TC260
VOLVOEC230, EC290
Refer to pages 2-8 & 2-10 for additional manufacturers and models.
25MT (52,000 to 65,000 LB) EXCAVATOR BUCKETS & COUPLERS
CF Pin-On Style / WidthCap.
Cu. Yd.Wt.
(lbs.)Lip Size
(in.)No.
TeethList
Price CF Pin-On Style / WidthCap.
Cu. Yd.Wt.
(lbs.)Lip Size
(in.)No.
TeethList
Price
65.0
58.8
STANDARDCAPACITY
HEAVY-DUTY
CF250X150-24 0.60 1390 1.50 3 $ 6,096
71.4
64.7
HIGHCAPACITY
HEAVY-DUTY
CF255X150-24 0.81 1453 1.50 3 $ 6,538
CF250X150-30 0.81 1563 1.50 4 6,550 CF255X150-30 1.08 1731 1.50 4 6,979
CF250X150-36 1.02 1639 1.50 5 6,771 CF255X150-36 1.36 1845 1.50 5 7,408
CF250X150-42 1.23 1779 1.50 5 7,212 CF255X150-42 1.64 1962 1.50 5 7,850
CF250X150-48 1.45 1866 1.50 6 7,666 CF255X150-48 1.93 2068 1.50 6 8,549
CF250X150-54 1.66 2099 1.50 6 8,549 CF255X150-54 2.23 2200 1.50 6 9,187
CF250X150-60 1.88 2169 1.50 7 9,445 CF255X150-60 2.52 2430 1.50 7 9,824
65.0
58.8
STD. CAPACITYEXTRA
HEAVY-DUTY
CF250X250-24 0.60 1540 1.50 3 $ 6,243
71.4
64.7
HIGH CAPACITYEXTRA
HEAVY-DUTY
CF255X250-24 0.81 1765 1.50 3 $ 6,771
CF250X250-30 0.81 1930 1.50 4 6,696 CF255X250-30 1.08 2010 1.50 4 7,212
CF250X250-36 1.02 2075 1.50 5 6,918 CF255X250-36 1.36 2133 1.50 5 7,629
CF250X250-42 1.23 2195 1.50 5 7,359 CF255X250-42 1.64 2279 1.50 5 8,070
CF250X250-48 1.45 2359 1.50 6 7,813 CF255X250-48 1.93 2505 1.50 6 8,770
CF250X250-54 1.66 2600 1.50 6 8,697 CF255X250-54 2.23 2801 1.50 6 9,469
CF250X250-60 1.88 2836 1.50 7 9,592 CF255X250-60 2.52 3000 1.50 7 10,045
65.0
58.8
STD. CAPACITYSEVERE-DUTY
CF250X350-24 0.60 1658 1.50 3 $ 7,064
71.4
64.7
HIGH CAPACITYSEVERE-DUTY
CF255X350-24 0.81 1735 1.50 3 $ 8,206
CF250X350-30 0.81 2080 1.50 4 7,518 CF255X350-30 1.08 2240 1.50 4 8,451
CF250X350-36 1.02 2179 1.50 4 7,961 CF255X350-36 1.36 2349 1.50 4 9,334
CF250X350-42 1.23 2308 1.50 4 8,402 CF255X350-42 1.64 2547 1.50 4 10,683
CF250X350-48 1.45 2519 1.50 5 9,065 CF255X350-48 1.93 2810 1.50 5 12,106
CF250X350-54 1.66 2699 1.50 6 9,726 CF255X350-54 2.23 3034 1.50 6 12,805
CF250X350-60 1.88 2929 1.50 6 13,087 CF255X350-60 2.52 3265 1.50 7 13,962
Wain-Roy Quick Change (Original, XLS)
46
52
HIGH CAPACITYHEAVY-DUTY
HD5-24 0.66 1205 1.50 3 $ 5,691
HD5-30 0.90 1370 1.50 4 6,096
HD5-36 1.14 1535 1.50 5 6,305
HD5-42 1.38 1690 1.50 5 6,709
HD5-48 1.63 1845 1.50 6 7,114
Optional Bolt-On Side Cutter Extensions, Add: 770
CF Pin-OnReversible 1.00” BOCE,
Add: Wain-Roy Quick Change (Original, XLS)Reversible
BOCE
DITCHING &GRADING
50.0
46.4
2DXH-48 1.10 1398 1.25 $ 586 $ 4,720 DITCHING &GRADING
48 0.75 1080 Standard $ 3,969
2DXH-54 1.25 1480 1.25 616 4,967 60 1.00 1110 Standard 4,393
3LDLF-60 0.85 835 1.25 635 4,532 66 1.15 1165 Standard 4,693
2DXH-60 1.43 1562 1.25 635 5,215 72 1.23 1220 Standard 4,992
2DXH-66 1.59 1660 1.25 653 5,464 84 1.45 1340 Standard 5,392
2DXH-72 1.78 1759 1.25 676 5,710
2DXH-84 2.09 1956 1.25 713 6,728
Note: Optional drain holes in side plate or backsheet.
Rev. 4/9/18
X150 Bucket: Heavier design than most OEM standard buckets. For use in soils containing low percentages of rock, loam and sand.
X250 Bucket: More demanding excavating conditions in clay,gravel, compacted soils and loose rock.
X350 Bucket: Abrasive and high impact applications in shot rock,coral, stratified materials, caliche and highly compacted material.
Bucket Capacities: Bucket capacities are based on IndustryStandard SAE J296 Heaped Capacity; bucket teeth are notincluded in this capacity calculation. For a bucket with teeth add:
� Bucket Capacity with Standard Teeth: Multiply listed bucket capacity x 1.05 (5%)
� Bucket Capacity with Flared Teeth: Multiply listed bucket capacity x 1.15 (15%)
25MT (52,000 to 65,000 LB) EXCAVATOR BUCKETS & COUPLERS (Continued)
COUPLERS
CF Pin Grabber Style / DescriptionWt.
(lbs.)List
Price CF Pin Grabber Style / DescriptionWt.
(lbs.)List
PriceQUICK-LATCHHYDRAULIC
20.1
33.95.5
Hydraulic (with latch,hydraulic kit and pinkit), includes “D-Ring”
1025 $ 9,503
QUICK-LATCHMECHANICAL
6.533.9
19.6
Mechanical (with pinkit), includes “D-Ring” 1050 $ 6,901
Jump latch 10,453 Jump latch 7,590
Pin Grabber Pin Kit Wain-Roy Quick Change (XLS)COUPLER PIN KIT
4P 140 �
MANUAL RELEASE
Manual release(Fits all Original andXLS style buckets and attachments)
650 $ 4,992
� Call for pricing.
Wain-Roy Quick Change (XLS) Wain-Roy Quick Change (XLS)HYDRAULIC RELEASE
Hydraulic coupler, pin kit and selectedcomponents(Fits all Original andXLS style buckets and attachments)
715 $ 6,869
SWINGER W/ MANUAL BUCKET RELEASE
Manual releaseswinger coupler(Fits all Original andXLS style buckets and attachments)
1000 $ 10,916
Note: Hydraulic components include valve, switch box & wiring, and hoses &connections between our valve & cylinder. Dealer is responsible for hosesfrom valve to drain (tank) and to the bucket cylinder for power.
Note: Dealer-supplied hydraulics. When providing the valve, controls & lines, besure to use two 3450 PSI relief valves. The Hydraulic Swinger Coupler is 24 inches wide. Digging depth is limited when a narrower bucket is used.
OPTIONS AND ADDITIONS TO BASE BUCKET(“D-Ring” bucket lifting eye and horizontal wear bars are standard)
DescriptionList
Price DescriptionList
Price
Vertical wear bars N/C Central Fabricators 6” side cutters (3 bolt) $ 759
“Anti-clatter” bushing assembly $ 277 Central Fabricators 3” wear shrouds (3 bolt) 653
Ear blanks 1,915
TOOTH STYLES
HensleyGeneric
Additional Tooth Availability (Price per Tooth)
Edge Size Standard Hensley CAT Esco Metalogenia
1.50” Manufacturer Specified Teeth & Adapter — X330 N/C 1U3351 $ 46 V33SYL $ 85MG20U $ 37
MG30U $ 85
2.00”Upgrade Manufacturer Specified Teeth & Adapter $ 17 X370 $ 93 9W8452 $ 165 V39SYL $ 80 MG40U $ 147
Rev. 4/9/18
CASECX350
CATERPILLAR328, 336
DEERE/HITACHI350, 370
KOMATSUPC300, PC350
TEREXTXC300, TXC420
VOLVOEC290, EC360
30MT (65,000 to 95,000 LB) EXCAVATOR BUCKETS & COUPLERS
CF Pin-On Style / WidthCap.
Cu. Yd.Wt.
(lbs.)Lip Size
(in.)No.
TeethList
Price CF Pin-On Style / WidthCap.
Cu. Yd.Wt.
(lbs.)Lip Size
(in.)No.
TeethList
Price
71.4
64.7
STANDARDCAPACITY
HEAVY-DUTY
CF300X150-24 0.81 1600 1.50 3 $ 6,770
73.9
70.4
HIGHCAPACITY
HEAVY-DUTY
CF305X150-24 0.87 1900 1.50 3 $ 7,236
CF300X150-30 1.08 1770 1.50 4 7,213 CF305X150-30 1.18 2420 1.50 4 7,434
CF300X150-36 1.36 1872 1.50 4 7,865 CF305X150-36 1.49 2550 1.50 4 8,249
CF300X150-42 1.64 1998 1.50 5 8,750 CF305X150-42 1.82 2710 1.50 5 9,006
CF300X150-48 1.93 2115 1.50 6 9,624 CF305X150-48 2.15 2815 1.50 6 10,056
CF300X150-54 2.23 2215 1.50 6 10,720 CF305X150-54 2.49 2982 1.50 6 11,023
CF300X150-60 2.52 2338 1.50 7 11,816 CF305X150-60 2.83 3089 1.50 7 11,862
CF300X150-66 2.81 2451 1.50 7 12,386 CF305X150-66 3.17 3200 1.50 7 12,933
CF300X150-72 3.10 2573 1.50 7 13,341 CF305X150-72 3.51 3141 1.50 7 13,715
71.4
64.7
STD. CAPACITYEXTRA
HEAVY-DUTY
CF300X250-24 0.81 1836 2.00 3 $ 7,107
73.9
70.4
HIGH CAPACITYEXTRA
HEAVY-DUTY
CF305X250-24 0.87 2400 2.00 3 $ 7,340
CF300X250-30 1.08 1942 2.00 4 7,505 CF305X250-30 1.18 2516 2.00 4 7,538
CF300X250-36 1.36 2057 2.00 4 7,982 CF305X250-36 1.49 2781 2.00 4 8,400
CF300X250-42 1.64 2210 2.00 5 8,786 CF305X250-42 1.82 3020 2.00 5 9,303
CF300X250-48 1.93 2324 2.00 5 9,660 CF305X250-48 2.15 3218 2.00 5 10,281
CF300X250-54 2.23 2557 2.00 6 10,906 CF305X250-54 2.49 3562 2.00 6 11,850
CF300X250-60 2.52 2700 2.00 6 11,990 CF305X250-60 2.83 3660 2.00 6 12,881
CF300X250-66 2.81 2910 2.00 6 12,502 CF305X250-66 3.17 3800 2.00 6 13,109
CF300X250-72 3.10 3140 2.00 7 13,703 CF305X250-72 3.51 4028 2.00 7 14,308
71.4
64.7
STD. CAPACITYSEVERE-DUTY
CF300X350-24 0.81 2220 2.00 3 $ 7,388
73.9
70.4
HIGH CAPACITYSEVERE-DUTY
CF305X350-24 0.87 2580 2.00 3 $ 8,262
CF300X350-30 1.08 2414 2.00 3 8,016 CF305X350-30 1.18 2850 2.00 3 8,530
CF300X350-36 1.36 2578 2.00 4 8,262 CF305X350-36 1.49 3024 2.00 4 9,252
CF300X350-42 1.64 2897 2.00 4 9,066 CF305X350-42 1.82 3343 2.00 4 10,277
CF300X350-48 1.93 3049 2.00 5 9,939 CF305X350-48 2.15 3469 2.00 5 11,058
CF300X350-54 2.23 3298 2.00 5 11,326 CF305X350-54 2.49 3720 2.00 5 12,677
CF300X350-60 2.52 3456 2.00 6 12,619 CF305X350-60 2.83 3965 2.00 6 13,900
CF300X350-66 2.81 3584 2.00 6 13,633 CF305X350-66 3.17 4105 2.00 6 14,966
CF300X350-72 3.10 3766 2.00 7 15,015 CF305X350-72 3.51 4322 2.00 7 16,405
CF Pin-OnReversible 1.00” BOCE,
Add:
DITCHING &GRADING
50.0
46.4
2DXH-48 1.10 1470 1.25 $ 586 $ 4,720
2DXH-54 1.25 1570 1.25 616 4,967
2DXH-60 1.43 1660 1.25 635 5,215
2DXH-66 1.59 1765 1.25 653 5,464
2DXH-72 1.78 1850 1.25 676 5,710
2DXH-84 2.09 2040 1.25 713 6,728
Note: Optional drain holes in side plate or backsheet.
Rev. 4/9/18
X150 Bucket: Heavier design than most OEM standard buckets. For use in soils containing low percentages of rock, loam and sand.
X250 Bucket: More demanding excavating conditions in clay,gravel, compacted soils and loose rock.
X350 Bucket: Abrasive and high impact applications in shot rock,coral, stratified materials, caliche and highly compacted material.
Bucket Capacities: Bucket capacities are based on IndustryStandard SAE J296 Heaped Capacity; bucket teeth are notincluded in this capacity calculation. For a bucket with teeth add:
� Bucket Capacity with Standard Teeth: Multiply listed bucket capacity x 1.05 (5%)
� Bucket Capacity with Flared Teeth: Multiply listed bucket capacity x 1.15 (15%)
30MT (65,000 to 95,000 LB) EXCAVATOR BUCKETS & COUPLERS (Continued)
COUPLERS
CF Pin Grabber Style / DescriptionWt.
(lbs.)List
Price CF Pin Grabber Style / DescriptionWt.
(lbs.)List
PriceQUICK-LATCHHYDRAULIC
22.3
39.75.5
Hydraulic (with latch,hydraulic kit and pinkit), includes “D-Ring”
1315 $ 10,063
QUICK-LATCHMECHANICAL
6.541.4
23.0
Mechanical (with pinkit), includes “D-Ring” 1200 $ 7,996
Jump latch 11,070 Jump latch 8,797
OPTIONS AND ADDITIONS TO BASE BUCKET(“D-Ring” bucket lifting eye and horizontal wear bars are standard)
DescriptionList
Price DescriptionList
Price
Vertical wear bars N/C Central Fabricators 6” side cutters (3 bolt) $ 759
“Anti-clatter” bushing assembly $ 277 Central Fabricators 3” wear shrouds (3 bolt) 653
Ear blanks 2,441
TOOTH STYLES
HensleyGeneric
Additional Tooth Availability (Price per Tooth)
Edge Size Standard Hensley CAT Esco Metalogenia
1.50” Manufacturer Specified Teeth & Adapter — X330 N/C 1U3352 $ 64 V33SYL $ 85MG20U $ 37
MG30U $ 85
2.00” Manufacturer Specified Teeth & Adapter — X370 $ 77 9W8452 $ 148 V43SYL $ 103 MG40U $ 130
2.00”Upgrade Manufacturer Specified Teeth & Adapter $ 17 X400 $ 99 9W8452 $ 165 V43SYL $ 80 MG40U $ 147
Rev. 4/9/18
EXCAVATOR ATTACHMENTS & SPECIALTY BUCKETS (Continued)
SPECIALTY BUCKETS & ATTACHMENTS (Continued)
Weight ClassWain-Roy Pin-On
Style /Width
Cap.Cu. Yd.
Wt.(lbs.)
Opening(in.)
ListPrice
Wain-Roy QC(Original, XLS)
Style /Width
Cap.Cu. Yd.
Wt.(lbs.)
Opening(in.)
ListPrice
9MT (16K – 22K)and
12MT (22K – 30K)
JAW 24 0.39 920 51 $ 11,836 JAW 24 0.39 875 51 $ 9,910
30 0.52 1010 51 12,265 30 0.52 975 51 10,217
15MT (30K – 41K)and
20MT (41K – 52K)36 0.74 1800 51 15,895 36 0.74 1800 51 13,970
Wain-Roy Wain-Roy
9MT (16K – 22K)RIPPER TOOTH
JAW ATTACHMENT 275 $ 1,9136’ BACKFILL BLADEJAW ATTACHMENT 72 265 $ 2,546
12MT (22K – 30K) 275 2,021 72 265 2,653
Weight ClassWain-RoyPin-On
Style /Width
Cap. Cu.Yd. Wt. (lbs.)
ListPrice
Wain-Roy QC(XLS)
Style /Width
Cap. Cu.Yd. Wt. (lbs.)
ListPrice
9MT (16K – 22K)and
12MT (22K – 30K)
HYDRAULICTILTING BUCKET
48 0.70 1180 $ 8,285 HYDRAULICTILTING BUCKET
48 0.70 1135 $ 7,979
60 0.90 1367 8,614 60 0.90 1322 8,308
66 1.00 1445 8,702 66 1.00 1400 8,395
72 1.10 1513 8,905 72 1.10 1468 8,597
15MT (30K – 41K),
20MT (41K – 52K)and
25MT (52K – 65K)
60 1.00 1875 10,977 60 1.00 1830 10,671
72 1.13 2400 11,983 72 1.13 2355 11,677
CF Pin-On Weight Class Style / Width Dim “X” (in.) Dim “Y” (in.) Wt. (lbs.) Teeth List Price
RIPPER TOOTH
X
Y
9MT (16K – 22K) CF1R-30 30.0 4.5 260 24 Series $ 1,588
12MT (22K – 30K) CF1.5R-36 36.0 9.6 658 25 Series 3,618
15MT (30K – 41K) 2R-36 36.0 7.9 658 25 Series 3,850
20MT (41K – 52K) 2R-42 42.0 7.9 660 25 Series 3,966
25MT (52K – 65K) 2.5R-42 42.0 7.9 1000 35 Series 5,318
30MT (65K – 95K) 2.5R-36 36.0 6.4 1050 35 Series 5,444
45MT (95K – 110K) 3R-55 55.0 5.5 2201 35 Series 9,223
60MT (110K – 160K) 4R-55 55.0 8.0 2600 39 Series 10,659
80MT (160K – 200K) 4.5R-65 65.0 10.0 3100 39 Series 12,683
120MT (200K +) 8R-55 55.0 17.5 4300 V71 32,335
Wain-Roy Quick Change (Original, XLS)
RIPPER TOOTH
X
9MT (16K – 22K)and
12MT (22K – 30K)47.0 275 T1U3352 $ 2,441
15MT (30K – 41K),
20MT (41K – 52K)and
25MT (52K – 65K)
50.0 770 T702 4,697
Rev. 4/9/18
EXCAVATOR ATTACHMENTS & SPECIALTY BUCKETS (Continued)
SPECIALTY BUCKETS & ATTACHMENTS (Continued)
Wain-Roy QC(Original, XLS) Weight Class
Style /Width
Wt.(lbs.)
No.Teeth
ListPrice
Wain-Roy QC(Original, XLS) Weight Class
Style /Width
Wt.(lbs.)
ListPrice
“V” DITCHINGBUCKET 9MT (16K – 22K)
18 x 72 x45� 617 3 $ 3,348
5’ GRADING &BACKFILL BLADE 9MT (16K – 22K) 60 235 $ 1,851
12MT (22K – 30K)18 x 72 x
45� 617 3 3,348 12MT (22K – 30K) 60 235 1,851
Note: See excavator buckets, specific weight class section for tooth options available.
THUMBS (MATERIAL CLAMPS)
Central FabricatorsPin-On Style
Wt.(lbs.)
ListPrice Style
Wt.(lbs.)
ListPrice Style
Wt.(lbs.)
ListPrice
12MT (22K – 30K) RIGID, MAIN PIN(NO LINKS)
705 $ 5,299 HYDRAULIC DIRECT,MAIN PIN (NO LINKS)
CUSTOMDESIGN
750 $ 6,860 HYDRAULIC PROGRESSIVE (WITH LINKS)
CUSTOMDESIGN
1050 $ 10,163
15MT (30K – 41K) 800 7,167 900 9,211 1100 10,977
20MT (41K – 52K) 965 8,682 1050 10,058 1200 11,889
25MT (52K – 65K) 1225 9,162 1300 10,378 1600 12,449
30MT (65K – 95K) 1520 10,224 1540 12,260 1920 13,271
45MT (95K – 110K) 2045 11,670 2190 13,997 2720 16,270
9MT (16K – 22K) WELD-ON RIGID 480 $ 3,817 WELD-ON HYDRAULIC 480 $ 4,234
12MT (22K – 30K) 660 4,256 660 6,635
15MT (30K – 41K) 660 4,256 660 6,635
20MT (41K – 52K) 870 4,649 870 7,064
25MT (52K – 65K) 1070 6,194 1070 7,184
30MT (65K – 95K) 1370 6,230 1370 8,026
45MT (95K – 110K) 1504 7,752 1504 9,087
Wain-Roy Quick Change
9MT (16K – 22K)WELD-ON HYDRAULIC
480 $ 3,986HYDRAULIC DIRECT,MAIN PIN (NO LINKS)
CUSTOMDESIGN
600 $ 6,083
12MT (22K – 30K) 615 6,635 750 6,696
Rev. 4/9/18