Senza titolo-1 · Diagonal brace 2,1 m long Horizontal protection crossbar 1,6 m long Intermediate...
2
EUROPONT MATIC Photo of complete EUR XHDA-3 scaffold 100% 100% 100% Dimensions 1,60 x 0,80 m Total maximum height 8,01 m 2 200 kg/m 10 years CAPACITY WARRANTY 3.000.000 Damage to property and persons PRODUCT INSURANCE REGULATIONS EN 1004 « Made entirely in aluminium without nylon components to guarantee long reliability over time « Vertical uprights and traverse elements with pins and hands in aluminium with quick coupling with automatic locking « No additional ballast required « All the uprights have an integrated ladder with round rungs Ø 42 mm. rungs assembled on the vertical upright « Rungs positioned with a reduced step 25 cm. allowing maximum movement capacity of the surfaces and traverse elements « Auto-upright work platform with effortless assembly and surface in waterproof resin with non-slip relief « Wheels with crush-proof polyurethane core and support strip, non-marking certified EN1004 « Year of manufacture and manufacturer's brand on each piece « Instruction, use and maintenance manual The quick couplings with automatic locking and small dimensions of the scaffold guarantee simple, but more importantly very fast assembly. The modular structure allows adaptation to more difficult situations and use on slopes or uneven surfaces even of considerable size. The components are essential and compact to promote storage and transport with dimensions reduced to a minimum. Vertical uprights with impact-proof edging and quick coupling pin with automatic locking With edging against accidental impact and pin in specific, rust- proof cast aluminium allowing immediate, automatic coupling using the stainless steel metal, non-deforming and wrapping tie Traverse elements with quick coupling clamp and automatic locking Easy and fast assembly of all the traverse elements with coupling clamp in rust-proof cast aluminium with a safety pawl that prevents accidental detachment Round step Ø 42 mm. welded with non-slip knurling 0.5 mm. Strong steps welded to the vertical upright with large thicknesses to guarantee high strength against loads and rotary or direction stress present. to guarantee reliability over time. Wheels Ø 125 mm. made in Italy crush-proof certified EN 1004 Coupling wheel and polyurethane core, crush-proof, front brake and support strip, non-marking for use on precious floors
Transcript of Senza titolo-1 · Diagonal brace 2,1 m long Horizontal protection crossbar 1,6 m long Intermediate...
EUROPONT MATIC
Photo of complete EUR XHDA-3 scaffold
100%100%100%
Dimensions 1,60 x 0,80 mTotal maximum height 8,01 m
2200 kg/m
10 yearsCAPACITYWARRANTY
3.000.000Damage to property and persons
PRODUCTINSURANCE
REGULATIONS
EN 1004« Made entirely in aluminium without nylon components to
guarantee long reliability over time
« Vertical uprights and traverse elements with pins and hands in aluminium with quick coupling with automatic locking
« No additional ballast required
« All the uprights have an integrated ladder with round rungs Ø 42 mm. rungs assembled on the vertical upright
« Rungs positioned with a reduced step 25 cm. allowing maximum movement capacity of the surfaces and traverse elements
« Auto-upright work platform with effortless assembly and surface in waterproof resin with non-slip relief
« Wheels with crush-proof polyurethane core and support strip, non-marking certified EN1004
« Year of manufacture and manufacturer's brand on each piece
« Instruction, use and maintenance manual
The quick couplings with automatic locking and small dimensions of the scaffold guarantee simple, but more importantly very fast assembly. The modular structure allows adaptation to more difficult situations and use on slopes or uneven surfaces even of considerable size. The components are essential and compact to promote storage and transport with dimensions reduced to a minimum.
Vertical uprights with impact-proof edging and quick coupling pin with automatic locking
With edging against accidental impact and pin in specific, rust-proof cast aluminium allowing immediate, automatic coupling using the stainless steel metal, non-deforming and wrapping tie
Traverse elements with quick coupling clamp and automatic locking
Easy and fast assembly of all the traverse elements with coupling clamp in rust-proof cast aluminium with a safety pawl that prevents accidental detachment
Round step Ø 42 mm. welded with non-slip knurling 0.5 mm. Strong steps welded to the vertical upright with large thicknesses to guarantee high strength against loads and rotary or direction stress present. to guarantee reliability over time.
Wheels Ø 125 mm. made in Italy crush-proof certified EN 1004 Coupling wheel and polyurethane core, crush-proof, front brake and support strip, non-marking for use on precious floors
€
€
kg 101 148
EUR PB16
EUR MB E3
EUR HDA16
EUR R12
Horizontal protection frame self-assembling
m
m
m
5,84 7,84
5,01 7,01
3,84 5,84
2 3
2 2
4 6
4 4
EUR MI E8 4 6
EUR D16 2 2
EUR TE16
EUR STF HD2
EUR STF HD1
2 3
0 4
4 0
€
€
€
€
€
€
€
€
€
n° n°
EUR H16 2 2€
50
3,84
3,01
1,84
1
2
2
4
2
2
1
0
0
n°
2
XHDA-3 XHDA-5XHDA-1
EUROPONT MATIC - Professional Scaffolds
Mt. 3,01
XHDA - 5XHDA - 3XHDA - 1
Mt.5,01
Mt. 7,01
Upper uprights effortless connection on both sides
Upper railing coupling using tie-rods as an extension
Upper platform installation, climbing down the trapdoor
Tie-rod coupling to uprights locking the clamp on the step
With stiffening strut and extension, fast hooking, allowing the operator to assemble the entire upper surface protection before climbing up and dismantling it having climbed down
Self-assembling railing allowing safe assembly and dismantling from the bottom
NEW upright with facilitated coupling at
shoulder height
Minimum transport dimensions !
222 cm.84 cm.
56
cm
.
Photo of complete art. EUR XHDA - 3
N.B. Additional ballast weights are not required
WITHOUT ANCHORAGE - conform to EN 1004
OPTIONAL EUR GT25 - Aluminium anti-rust screw telescopic levellers leg up to 25 cm. n°4
Price total COMPLETE
Total weight
Article codes
USEFUL WORKING HEIGHT
OVERALL HEIGHT
HEIGHT TO PLATFORM
Adjustable steel outrigger with double arms EN1004 up to 4,84 (platform)
Adjustable steel outrigger with double arms EN1004 up to 6,84 (platform)
Working platform with trapdoor
Complete wood interloking toe-board
Ø 125 mm. nylon crusch-proof wheels Made in Italy EN1004 certified with red tyres
Diagonal brace 2,1 m long
Horizontal protection crossbar 1,6 m long
Intermediate vertical upright 2,00 m with 8 rungs
Base vertical upright 1,75 m with 3 rungs
