Sengkang Test Schedule
-
Upload
yam-balaoing -
Category
Documents
-
view
222 -
download
0
Transcript of Sengkang Test Schedule
-
8/12/2019 Sengkang Test Schedule
1/2
CE SpecsPage 8-3
CE11/S8.DOCSal(010611)DPD
8.1 TESTING OF MATERIAL (CONT'D)
SCHEDULE OF MATERIAL TESTS (CE WORKS)
S/NTYPE OF
MATERIALTO BE TESTED
TYPE OF TEST TO BECARRIED OUT
FREQUENCY OF TESTFOR EACH TYPE OF TEST
NO. OFSAMPLESPER TEST
1. Timber piles ) a) Moisture content)) b) Green/dry stresses) (stress grading))) c) Preservative) penetration)) d) Dry salt retention
)) 1) 1 test for up to 3000 metre) run.)) 2) Subsequent test at each) interval of 3000 metre run) subject to a minimum of) 2 test.)
2. Concrete -concrete cube
Compressive strength 1 test for every 20 cubic metreor part thereof of each grade forevery concreting day.
2 cubes for testat 7 days and 2cubes for test at28 days.
3. Precast concretedrain channels,kerbs, roadchannels(gutters),dividers, etc
Absorption test 0.5% of total quantities requiredfor the Works subject to aminimum of 3 numbers.
3
a) Water absorption test a) 0.5% of total quantitiesrequired for the Workssubject to a minimum of 3slabs.
4. Precast aerationslabs
b) Transverse strengthtest
b) Minimum of 3 slabs forevery 1,000 pieces of theWorks.
}}}} 3}}}
5. Precast BGslabs
a) Water absorption a) 3 tests for every 1,000pieces subject to a minimumof 3 tests.
b) Transverse strength
test
b) 3 tests for every 1,000
pieces subject to a minimumof 3 tests.
}}} 3}}}
6. Interlockingconcrete pavingblocks
a) Compressive strength a) 1 test for each 550 m2
ofinterlocking concretepavement.
16
b) Surface LayerThickness
b) 5 tests, comprising 1 sampleper test, for each 550 m
2of
interlocking concretepavement.
1
-
8/12/2019 Sengkang Test Schedule
2/2
CE SpecsPage 8-4
CE11/S8.DOCSal(010611)DPD
8.1 TESTING OF MATERIAL (CONT'D)
SCHEDULE OF MATERIAL TESTS (CE WORKS)
S/N
TYPE OF
MATERIALTO BE TESTED
TYPE OF TEST TO BE
CARRIED OUT
FREQUENCY OF TEST
FOR EACH TYPE OF TEST
NO. OF
SAMPLESPER TEST
a) Mean TransverseBreaking Load Test
a) 1 test for each 200 m2of
clay pavers pavement.107. Clay pavers for
flexible pavement(Type PB)
b) Mean Wet SkidResistance
b) 1 test for each 200 m2of
clay pavers pavement.5
8. Hot dippedgalvanisedgrating
Zinc Mass Coating Test 2% of total number of gratingssubject to a minimum of 3numbers of gratings.
9 Soil testing for
sidetables.
Soil classification 1 test for every 200 m of
sidetable subject to a minimumof 2 tests.
10. Final testing ofkerbs.
Water absorption test 1 test for every 120 m lengthsubject to a minimum of2 tests.
11. Final testing ofpremix.
Grading analysis,thickness and bitumencontent
1 test for every 550 m2of
carpark and 1 test for every 450m
2of service road/driveway
subject to a minimum of 2 tests.
12. Final testing ofprecast footpathslabs.
Water absorption test 1 sample for every 350 m2
subject to a minimum of 2 tests.
a) Compaction test(Dry Density/MoistureContent Relation)
a) 1 test for each classof material to be compacted
13. Compaction ofroad formation.
b) In Situ Field DensityTest
b) 1 test for every 300m2of
surface of each compactedlayer.
14. Compaction ofsubgrade.
CBR test. 1 test for every 50m ofcarriageway subject to aminimum of 3 tests.
15. Plant soil. Soil classifications. 3 tests.
16. Road Works LTA Road TestingRequirements
As specified in theSpecifications.
a) Tranverse StrengthTest
a) Minimum of 3 slabs forevery 1,000 pieces.
b) Water Absorption Test b) Minimum of 5 slabls forevery 1,000 pieces.
17. PerforatedInterlockingParing Slabs
c) Surface Layerthickness
b) 5 tests comprising 1 sampleper test, for each 550 m
2of
interlocking concretepavement.