Section 39 - Fishing Accessories
description
Transcript of Section 39 - Fishing Accessories
www.bla.com.au
FIS
HIN
G A
CC
ES
SO
RIE
Ssection
39
Cannon Down Riggers 658-663Cannon Down Rigger Accessories 664-665Taco Outriggers & Striker Bases 666Taco Outrigger Rigging Kits & Accessories 667Perko Outrigger Accessories 667Custom Tackle Stations 668Cutting Boards 669-671Berley Buckets & Livebait Tank 671Storage Bins 672Rod Holders 673Cutting Board & Rod Holder Accessories 674-675Fishing Knives 675Anchor Wells, Consoles & Bathyscope 676
FISHING ACCESSORIES
657
section
39
658
FIS
HIN
G A
CC
ES
SO
RIE
S
Jack of All TradesWhether your’re trolling open water for Mackerel or pulling Snapper off structure, a Cannon Downrigger instantly gives you controlled depth and more accurately positioned bait presentation. No matter what species you’re after, fish have nowhere to hide.
“Run Deep” with the bottom-tracking abilities of Cannon to stay a consistent distance from the bottom - even when depth changes.
For total coverage of the water below, use a Uni-Stacker to fish at multiple depths off of a single weight.
Get the edge you need with our unique fish-enticing features, like cycling your downriggers up and down to raise and lower bait.
1
2
3
23
1
SEE THE FISHPRESENT THE BAIT
CONTROL THE DEPTH
FIGHT WEIGHT FREE
1. 2. 3. 4.
5. 6. 7. 8.
1. 2. 3. 4.
5. 6. 7. 8.
1. Set bait or lure to the desired distance you wish to troll it behind the boat
5. When correct depth is obtained tighten clutch on downrigger (manual models)
2. Place the line into the release clip at a position suitable to the lines breaking strain
6. Engage reel and wind the handle to create pressure on fishing line with pronounced bend in fishing rod
3. Loosen the clutch on the down rigger (manual models) and set the fishing reel to free spool
7. On hook up, line will automatically release from clip
4. Lower the down rigger to the predetermined depth ensuring fishing reel does not over run when being deployed
8. Have fishing mate raise downrigger bomb
Getting the best from your Downrigger
Quality marine equipment
FIS
HIN
G A
CC
ES
SO
RIE
Ssection
39
659
Cannon Mag 20DT/TS DownriggerThe Mag 20DT/TS features a sleek white cosmetic finish. An extremely durable stainless steel spool allows for monofilament or “super line” use. Features a low-profile swivel base, rear rod holder and two line releases. Pre-spooled with 121.9 M of camouflaged 68kg test 316-grade stainless steel cable. Discover what your fishfinder and your downriggers are truly capable of when you use them together. The compatibility with the CannonLink™ Fishing System Module (sold separately) lets you operate up to six Mag 20DT downriggers directly from select Humminbird® fishfinders. Mounted at the helm, you’ll see where the fish are and be able to make instant depth adjustments without losing control of boat speed and steering – often the difference between missing a fish and landing the trophy of a lifetime.
Features:• 76.2 metres-per-min. retrieval rate is the fastest in the industry• Positive Ion Control with adjustable voltage lets you regulate the
fish-attracting electrical field around your boat• 9.7kg weight capacity• New IP 68 waterproof power cable connector• Short-Stop safely stops weight retrieval
at waterline • Heavy-duty telescopic boom extends
from 24" to 53" • Low-profile swivel base, rear rod holder
(as shown) and two line releases• Three-digit depth counter• Ball storage hook prevents boat damage
from swinging weights• Pre-spooled with 122metres of
camouflaged 68kg test 316 grade stainless steel cable• Saltwater-resistant• Limited lifetime warranty
Cannon Mag 10TS DownriggerThe downrigger that serious boat skippers trust for its dependability and durability. They rely on its unparalleled toughness, the fastest retrieval rate on the market (76.2 metres per min.) and a Short-Stop feature that protects the boat from swinging weights. A low-profile swivel base (included) lets you quickly tend to your line without taking up excess room on the gunwale or rail. Smart, convenient design that maximizes performance and minimizes space. For the serious tournament angler, the Mag 10TS features a stylish metallic white finish and a stainless steel spool that’s tough enough to handle monofilament or today’s popular “super lines.”
Features:• Metallic white cosmetics with stainless steel spool
to allow for monofilament use• 76.2m-per-min. retrieval rate is the fastest in the industry• Positive Ion Control creates a fish-attracting
electrical field around your boat• Short-Stop safely stops weight retrieve at waterline • Heavy-duty telescopic boom extends from 24" to 53" • 9.7kg weight capacity• Three-digit depth counter• New IP 68 waterproof power cable
connector• Ball storage hook prevents boat damage
from swinging weights • Low-profile swivel base, rod holder and line
release • Pre-spooled with 122 metres of
camouflaged 68kg test 316 grade stainless steel cable
• Saltwater-resistant
BLA Description Length Width Height MountCode Screws m mm mm mm
394230 Mag 20 DT tournament series 1.8 215 530 6r/h
BLA Description Length Width Height MountCode Screws m mm mm mm
394232 Mag 10 tournament series 1.8 215 530 6r/h
www.bla.com.au
Cannon Uni-Troll™ 10TS DownriggerThe Uni-Troll™ 10TS features a high speed retrival mechanism to maximise your fishing time and is engineered to last with a clutch/brake for safer weight descent and a ball storage hook to protect the boat from the cannonball. For tournament anglers, the Uni-Troll 10TS uses a monofilament ready stainless steel spool with camouflaged 68kg test stainless steel cable.
Features: • High-speed retrieve raises weight 50% faster with reduced cranking effort• Vertical spool designed with clutch/brake system for safe, controlled one-handed
weight descent • Three-digit depth counter• 24" to 53" heavy-duty stainless steel telescopic boom• Ball storage hook prevents boat damage from swinging weights• Rod holder and line release• Pre-spooled with 61 metres of camouflaged 68kg test
316 grade stainless steel cable• Saltwater-resistant• Limited lifetime warranty
Cannon Digi-Troll™ IV HS DownriggerThe Digi-Troll™ Series IV lets you take complete control. Utilise the cycle function to automatically jig the weight up and down, or use bottom tracking mode to keep weight at a certain distance from the bottom.
Features: • Cycle function automatically jigs the weight up and down at a set depth/time interval• Memory storage remembers up to five different depths• Retrieve memory lets you program retrieve rates of 33.5, 45.7 or 76.2 metres per min• Bottom tracking mode keeps weight at a set distance off the bottom (with optional transducer –
sold separately) and multiple downriggers can be networked to one transducer (with optional relay cables – sold separately)
• 76.2m per min. retrieval rate is the fastest in the industry• Positive Ion Control with adjustable voltage lets you regulate the fish-attracting electrical field
around your boat• 9.7kg weight capacity• New IP 68 waterproof power cable connector• Short-Stop safely stops weight
retrieve at waterline• Low-profile swivel base, dual rear
rod holder and two line releases• Heavy-duty telescopic boom
extends from 24" to 53"• Three-digit depth counter
Ball storage hook prevents boat damage from swinging weights
• Pre-spooled with 122 metres of camouflaged 68kg test 316 grade stainless steel cable
• Saltwater-resistant• Limited lifetime warranty
BLA Description Length Width Height MountCode Screws m mm mm mm
394236 Uni-Troll 10 TS tournament series 1.8 240 460 6r/h
BLA Description Length Width Height MountCode Screws m mm mm mm
394222 Digi-Troll IV HS 1.8 240 460 6r/h
section
39
660
FIS
HIN
G A
CC
ES
SO
RIE
S
Quality marine equipment
FIS
HIN
G A
CC
ES
SO
RIE
Ssection
39
661
Cannon Mag 5HS DownriggerThe downrigger that serious charter operators trust for its dependability and durability. They rely on its unparalleled toughness, the fastest retrieval rate on the market (76.2 metres per min.) and a Short-Stop feature that protects the boat from swinging weights.
Features: • 24" heavy duty boom and a 76.2 metre-per-minute retrieval rate• 76.2m per min. retrieval rate is the fastest in the industry• 9.7kg weight capacity• Positive Ion Control creates a fish-attracting electrical field around your boat• Short-Stop safely stops weight retrieve at waterline• Three-digit depth counter• 24" heavy-duty boom• New IP 68 waterproof power cable connector• Ball storage hook prevents boat damage from swinging weights• Rod holder and line release• Pre-spooled with 76m of camouflaged 68kg test 316 grade stainless steel cable• Saltwater-resistant• Limited lifetime warranty
Cannon Uni -Troll™ 10 Metric DownriggerThe Uni-Troll™ 10 Metric features a high speed retrival mechanism to maximise your fishing time and is engineered to last with a clutch/brake for safer weight descent and a ball storage hook to protect the boat from the cannonball. Enjoy the added versatility and strength of 61 metres of camouflage stainless steel cable mounted on an ultra-durable telescopic boom on a low-profile swivel base.
Features:• High-speed retrieve raises weight 50% faster with reduced cranking effort• Vertical spool designed with clutch/brake system for safe,
controlled one-handed weight descent• Three-digit depth counter• Heavy-duty telescopic boom extends from 24" to 53"• Ball storage hook prevents boat damage from swinging weights• Low-profile swivel base, rod holder and line release• Pre-spooled with 61 metres of camouflaged 68kg test 316 grade stainless steel cable• Saltwater-resistant• Limited lifetime warranty
BLA Description Length Width Height MountCode Screws mm mm mm mm
394234 Mag 5HS metric 940 240 280 6r/h
BLA Description Length Width Height MountCode Screws m mm mm mm
394238 Uni-Troll 10 metric 1.8 215 300 6r/h
www.bla.com.au
Cannon Uni -Troll™ 5 Metric DownriggerThe Uni-Troll™ 5 Metric features a high speed retrival mechanism to maximise your fishing time and is engineered to last with a clutch/brake for safer weight descent and a ball storage hook to protect the boat from the cannonball. Enjoy the added versatility and strength of 61 metres of camouflage stainless steel cable mounted on a 24" heavy duty boom.
Features:• High-speed retrieve raises weight 50% faster with reduced cranking effort• Vertical spool designed with clutch/brake system for safe,
controlled one-handed weight descent• Three-digit depth counter• Heavy-duty 24" boom • Ball storage hook prevents boat damage from swinging weights• Low-profile swivel base, rod holder and line release• Pre-spooled with 61metres of camouflaged 68kg
test 316 grade stainless steel cable• Saltwater-resistant• Limited lifetime warranty
Cannon Easi-Troll™ HS DownriggerThese hardworking, durable downriggers are ideal for smaller boats and fishermen just beginning to realize the advantage of fishing a downrigger. Our manual downriggers are built to deliver trusted Cannon performance while standing up to harsh saltwater conditions. The Easi-Troll™ HS use a clutch/brake for controlled, safe descent without cranking. The model features a durable copolymer boom and a convenient line release mounted on a tab-lock base. Break into downrigging with one of our highly capable manual models.
Features:• High-speed retrieve raises weight 50% faster with reduced cranking effort• Vertical spool designed with clutch/brake system for safe, controlled one-handed weight descent• Quick mount tab-lock base• Three-digit depth counter• 24" copolymer boom• Pre-spooled with 45.7m of camouflaged 68kg test 316 grade stainless steel cable• Includes line release and tube
style rod holder• Saltwater resistant• Limited lifetime warranty
BLA Description Length Width Height MountCode Screws mm mm mm mm
394242 Uni-Troll 5 metric 940 215 280 6r/h
BLA Description Length Width Height MountCode Screws mm mm mm mm
394246 Easi-Troll 2 metric 950 215 300 6r/h
section
39
662
FIS
HIN
G A
CC
ES
SO
RIE
S
Quality marine equipment
FIS
HIN
G A
CC
ES
SO
RIE
Ssection
39
663
Cannon Lake-Troll DownriggerThis hardworking, durable downrigger is ideal for smaller boats and fishermen just beginning to realise the advantage of fishing with a downrigger. Built to deliver trusted Cannon performance while standing up to harsh saltwater conditions. The Lake-Troll uses a clutch/brake for controlled, safe descent without cranking. Model features a durable copolymer boom and a convenient line release mounted on a tab-lock base. Break into downrigging with one of our highly capable manual models.
Features: • Vertical spool designed with clutch/brake system for safe, controlled one-handed
weight descent• Quick mount tab-lock base• Swivel-head depth counter• 18" copolymer boom• Pre-spooled with 30.5 metres of stainless steel cable• Includes line release and tube style rod holder• Saltwater-resistant• Limited lifetime warranty
Mini-Troll Downrigger Ideally suited to live baiting or trolling for Trout, Tailor, Salmon and many other estuarine, lake or shallow reef species in light current conditions. Cannon’s portable Mini-Troll downrigger mounts easily to transom, gunwale or rail to 63mm (2.5") wide with its ‘C’ clamp base. Both the frame and reel are manufactured from Lexan, with the horizontal manual reel spooled with 30m (100’) of test 54kg (120lb) stainless steel wire. Screw down control mounted in centre of spool governs free spool friction for controlled deployment and retrieval. Imperial depth counter located on boom end.
Features:• Versatile “C” clamp base• Boom mounted depth counter• Saltwater resistant construction
BLA Description Length Width HeightCode mm mm mm
394252 Mini-Troll downrigger 490 130 230
BLA Description Length Width Height MountCode Screws mm mm mm mm
394250 Lake Troll 830 215 245 6r/h
www.bla.com.au
Mounting BaseMAG 20 DT Replacement or additional base mount for Cannon MAG 20 DT. Durable maintenance free Lexan construction. Supplied with stainless steel fastenings to mount to decks up to 6mm thick.
Uni-TrollBuilt from heavy-duty Lexan for superior strength, and corrosion and U.V. resistance. This base is made for large body manual Cannon downriggers.
Downrigger Gimbal Mount Black powder coated aluminium bracket that will mount any of the Cannon downrigger range, except Mini-Troll, into an existing rod holder. Pre-drilled to accept all bases. Solid 13mm thick top mount pad. Extra heavy duty 6mm wall thickness support tube. Stainless steel mount fastening included.
BLA Height Mount TubeCode Pad Dia mm mm mm
394366 225 127x127 38394370 305 127x127 38
Line ReleaseOffshore SaltwaterCorrosion-resistant, high-tension spring is designed for heavier saltwater lines. Troll at high speeds in deep water with its heavy duty release. Anti-fouling pins prevent line from snagging behind the gripper pads.
UniversalTwo adjustment points enable the universal release clip to be precisely adjusted to release at 0.9kg (2lb) and 9.97kg (22lb), making this a versatile clip, whether you are trolling deep diving hard bodies or live baiting.
Release ClipsOffshore Stacker ClipAdds the ability to fish at multiple depths off a single weight with the popular Offshore Line Release.
Pinch-R-Release ClipSpring action clip available in a single format. Opens easily with finger pressure with an operating release range of between .9kg (2lb) and 5.4kg (12lb). The deeper the line is set back in the pads the greater the pressure.
Quick Release ClipAvailable in single or twin stacker format, these clips are easily tensioned by rotating the small knurled knob on the side.
Downrigger WeightsCast lead downrigger weights brass attachment points. Designed for use on all downriggers.
BLA ReleaseCode
394424 Single394428 Stacker
BLA WeightCode lb
394430 4394432 6394434 8394436 10394438 12
Downrigger WireReplacement stainless steel wire to suit Cannon downriggers.
BLA Length BreakCode Load m kg
394440 45 68394442 60 68394444 120 68
BLA DescriptionCode
394460 Termination kit394462 Termination only
Termination Kit Suits all Cannon downriggers. Includes six crimpless snap-on terminators, six snap-on swivels and six cushion tops. Also available as terminator only.
BLA Height Width Depth Mount Code Holes mm mm mm mm
394354 18 93 93 6r/h394362 45 95 95 6r/h
394412
394400
394424
394462
394460
394362
394354
394404
394432
BLA DescriptionCode
394402 Offshore release Cannon394404 Universal line release Cannon
394428
394402
BLA DescriptionCode
394400 Offshore stacker release Cannon394412 Pinch-R-Release
section
39
664
FIS
HIN
G A
CC
ES
SO
RIE
S
Quality marine equipment
FIS
HIN
G A
CC
ES
SO
RIE
Ssection
39
665
Base Mount Tab LockReplacement or additional base mount for Cannon Sport-Troll or Easi-Troll. Manufactured from durable, maintenance free, U.V. stable Lexan.
Low Profile Swivel BaseHeavy duty Lexan and stainless steel swivel base. Six point locking, including two 45º positions. Suits MAG 20 DT, Digi Troll IV, Sport-Troll, Uni-Troll and Easi-Troll. Stainless steel mount fastenings included to connect to up to 6mm thick deck.
BLA Length Width Height Mount Code Holes mm mm mm mm
394350 145 130 35 6r/h
BLA Length Width Height Mount Code Holes mm mm mm mm
394358 189 146 29 6r/h
Digi-Troll TransducerWhen connected to the Digi-Troll IV this transducer enables the Digi-Troll to operate bottom tracking, a feature that allows the weight to maintain a precise distance from the seabed, to increments of 300mm. Includes mounting bracket.
Relay Interphase CableWhen one Digi-Troll unit is connected to a Digi-Troll transducer, other units can be interphased with the master unit using this relay interphase cable. This allows all Digi-Troll units connected to the master unit to independently operate the bottom tracking feature, while only using one transducer.
BLA Description Frequency Beam Cable Code Angle Length kHz m
394320 Transducer 200 18˚ 6
BLA Description Length Code m
394324 Interphase cable 6394326 Relay cable Mag 20 DT 6
Cannon Downrigger CoverSoft, non-abrasive backing and Velcro® enclosure allows for secure, protective fit on all large-bodied downriggers.
Rail/Side MountBuilt to secure downrigger to the “T” joints on rails of boats with narrow gunwales. Built with machined aluminium and powder coated to resist corrosion.
Clamp MountSecures downrigger to the gunwale or transom. Works with Sport-Troll™, Easi- Troll™ and Mini-Mag downriggers. Powder coated aluminium to resist corrosion. Maximum clamp opening 50.8mm.
E-Z ReleaseConvenient, one-handed, quick-load release. Features a three-click adjustment for a range of tension settings between .9kg to 3.62kg.
BLA Code
394340
BLA Code
394420
BLA Length Width HeightCode mm mm mm
394374 128 128 105
BLA Length Width HeightCode mm mm mm
394378 115 102 90
www.bla.com.au
Telescopic OutriggersTop quality poles for the serious offshore angler. Sold as a pair.
Features:• Simple push button extension or retraction for convenient
storage when towing or dry storing• Premium quality craftsmanship• Poles are anodised drawn aluminium• CNC precision machined gold anodised aluminium rings
and tips• Stainless steel line guides• Internal delrin bushing for easy sliding without scratching• Delrin sleeve to base to prevent electrolysis• Made in USA• Available in 28mm or 38mm base diameter• 12 month warranty
Striker Outrigger BasesThe Taco Striker flush through deck mounts feature solid cast all 316 stainless steel construction and incorporate a multi position, six point internal locking system. They are sized to accept Taco 28mm or 38mm outriggers. Sold as a pair.Features:• Ambidextrous arms
will fit both port and starboard bases
• 12 locking positions including stand up and lay down
• Highly polished finish 316 grade stainless steel
Black anodised with gold rIngs and tips
Stainless steel detent button for simple and secure locking
BLA Length Length Base Sections ColourCode Extended Retracted Dia. m m mm
394512 3.5 1.6 28 3 Black394518 4.6 1.7 28 4 Black394524 4.6 1.7 38 4 Black394530 5.6 1.8 38 5 Black
BLA Outrigger MountCode Base ø Plate mm mm
394550 28 130x66394552 38 150x100
Outrigger Pole KitComplete kit contains one pair of 4.8 metre telescopic anodised aluminium poles, two trolling clips, two roller tips and two sets of line guides. Compatible with 403404 bases.
Trolling Clip
Roller Tip Line Guide
Threaded Section
Line Guide
BLA Height Base SectionsCode OD mm mm
403410 4.8 29 4
BLA Tube Base MountCode ID Dim. Screws mm mm mm
403404 29 127x63 6 c/s
394552394550
Outrigger Pole Holder - Deck Mount
Removable tubes lift and turn to three positions; vertical, fishing and lowered. Stainless steel universal tubes with chromed zinc deck mount brackets, may be used on either side of the vessel. Sold as a pair (i.e. two tubes and two mounts).
Outrigger Pole
section
39
666
FIS
HIN
G A
CC
ES
SO
RIE
S
Quality marine equipment
FIS
HIN
G A
CC
ES
SO
RIE
Ssection
39
667
Premium Rigging KitSingle line rigging kit to suit one pair of outriggers to 6.5 metres.
Inclusions:• 2 x Trip-ese releases• 2 x Shock cords with stainless steel snap hooks and pulleys• 2 x Barrel swivels• 4 x Snap swivels• 2 x Crimps• 2 x Stainless steel deck saddles and screws• 2 x Balsa floats• 30m x U.V. protected dacron line• All packed in mesh bag with clear front
Standard Rigging KitSingle line rigging kit to suit one pair of outriggers to 6.5 metres.
Inclusions:• 2 x 'Blacks' releases• 4 x Shock cords with chromed snaps and clear rings• 2 x Barrel swivels• 4 x Snap swivels• 2 x Crimps• 2 x Stainless steel deck saddles and screws• 30m x U.V. protected dacron line• All packaged in a mesh bag
Rigging Accessories
BLA Code
394574
BLA Code
394578
394592
394590
BLA DescriptionCode
394588 Trip-ese release394590 'Blacks' release clip394592 Shock cord with chromed snap and clear ring394594 Shock cord with S/S snap hook and single pulley
Outrigger Trolling ClipTrolling peg for use with outrigger poles. High impact black plastic with stainless steel eyes and spring. Jaws release line under strike load.
BLA Length WidthCode mm mm
403434 70 35
Outrigger Roller TipsHigh impact plastic with nylon sheave. Stainless steel grub screw locates to top of pole. Sold as a pair.
BLA Tube Rope SheaveCode Dia. Dia. mm mm mm
403412 16 4 22403414 20 6 22
Outrigger Line GuidesLine guides for outrigger poles. High impact black plastic body with 10mm ID stainless steel eye. Eye stem threads through base to locate on pole. Sold as a pair.
BLA TubeCode Dia. mm
403420 16403422 20403424 25403426 30403428 41
394588
394594
www.bla.com.au
BLA Manufacturing Tackle StationsBLA manufacturing is proud to introduce a range bait stations. Manufactured in Australia from quality outdoor King Starboard and using top quality marine accessories, these bait stations will provide years of maintenance free use.
BLA Manufacturing can custom design and build a wide range of products to your exact requirements and specifications. By utilising our in house CAD (Computer Aided Design) program each piece of King Starboard is meticulously manufactured using our CNC machine to produce the desired product.
BLA manufacturing can produce for you virtually any size, shape and style of products using a range of quality materials you choose.
BLA Size Rod Drink Width Depth Height SuitsCode Holders Holder mm mm mm
395850 Small 2 1 872 385 319 Pedestal 183026 (not included)395852 Large 6 2 1275 612 464 Pedestal 183026 (included)
395850
395852
N.B. Does not include pedestal height. Customised bait boards available.
section
39
668
FIS
HIN
G A
CC
ES
SO
RIE
S
Quality marine equipment
FIS
HIN
G A
CC
ES
SO
RIE
Ssection
39
669
BLA Size Rod Width Depth Above IntrusionCode Slots Deck mm mm mm mm
394836 Medium 2 820 425 300 200 394856 Large 4 1170 425 280 200394860 Large 4 1170 425 425 200
394870 Tray insert t/s 394860 cutting board
BLA Size Rod Width Depth Above IntrusionCode Holders Deck mm mm mm mm
394832 Medium 2 770 430 330 200394834 Medium 4 1050 430 330 200394854 Large 4 1320 500 330 200
394834
394832
394854
394856
Supreme Cutting/Bait Boards - Rod Holder Mount
All in one complete angler’s centre with easy installation and removal into two existing fixed rod holders. New quick release anodised aluminium rod holders that enable tension to be maintained on the line while removing the rod. Pivoting universal enables the cutting/bait board to set at a convenient working angle. Manufactured from super tough U.V. stabilised roto moulded polyethylene, aluminium, black HDPE and glass filled nylon so they can be simply hosed off to clean at the end of the days fishing. Cutting surface resists cuts and abrasions whilst retaining knife edge. All models include a recessed tray for storage of knives, tackle or offal run off, with the medium and large models featuring two recessed drink holders and storage trays.
Deluxe Cutting/Bait BoardsConvenient drop in/lift out mount into two existing fixed mount rod holders. Manufactured from super tough moulded U.V. stable, roto moulded polyethylene, glass filled nylon and aluminium. Cutting surface resists cuts and abrasions whilst retaining knife edge. Features include fan pattern integral moulded rod holder slots, two drink holders and multiple storage recesses. 394860 includes a large storage compartment underneath the cutting surface of the board.
394860
www.bla.com.au
394802
394842
BLA Size Width Depth Above Intrusion MountCode Deck Legs mm mm mm mm
394802 Small 525 355 245 200 1394822 Medium 715 420 290 200 2394842 Large 910 495 290 200 2394850 Large 1130 425 375 200 2
Standard Cutting/Bait Boards - Rod Holder Mount
These versatile cutting boards simply drop into existing fixed mount rod holders. Manufactured from super tough moulded U.V. stabilised polyethylene and aluminium. Resists cuts and abrasions whilst retaining knife edge. Features a moulded in, recessed tray for storage of knives, tackle or offal run off. Medium and large models include two recessed drink holders and recessed storage trays. The medium size also has 2 rod holders incorporated. A twist lock pivot provides quick adjustment of cutting surface to horizontal and also allows compact storage.
Rail Mount Cutting/Bait BoardsManufactured from super tough moulded U.V. stabilised polyethylene, aluminium and 50% glass filled nylon. Resists cuts and abrasions whilst retaining knife edge. Features a catch measuring integral ruler, recessed tray for storage of knives, tackle or offal run off. Medium and large models also include two recessed drink holders and recessed storage trays. Mount brackets clamp onto 25mm diameter tube. Adaptor sleeves are also available for attachment to 22mm and 19mm OD tube.
BLA Size Width Depth AboveCode Rail mm mm mm
394806 Small 460 375 180394826 Medium 720 425 220394846 Large 950 430 220394958 Adapter sleeve 22mm394960 Adapter sleeve 19mm
394806
394846
394826
394958
Railblaza Baitboard KitA stable, removable surface for cutting bait or cleaning the catch comprising of one board and two platforms.
Features:
• Adjustable angle, mountable on sloping surfaces• Portable to other StarPort™ locations• Mounts fold up for easy storage
Two sizes: Small: 465 x 340 x 50 mm Large: 570 x 390 x 50 mm
BLA DescriptionCode
195600 Small baitboard kit include mount195602 Large baitboard kit include mount195604 Small baitboard kit include mount & starport195606 Large baitboard kit include mount & starport
195604
394850
394822
section
39
670
FIS
HIN
G A
CC
ES
SO
RIE
S
Quality marine equipment
FIS
HIN
G A
CC
ES
SO
RIE
Ssection
39
671
Fish-n-Board - Cutting Board
Injection moulded from U.V. stabilised high density polyethylene. Ideal for cutting up bait or scaling and filleting your catch. Features integral knife holder, 40cm ruler, moulded drains for ease of cleaning (which can also be used for berleying) and full stainless steel mount hardware to suit rail or gunwale mount.
Berley Bucket - Transom Mount
Economy 'D' shaped transom mount berley bucket moulded from one piece high impact polyethylene. Permanently through bolt mounts. Aluminium 'muncher' included.
Live Bait TankReady to install, moulded polyethylene live bait tank. Supplied complete with transom mount water pick-up and 12volt submersible pump. Incorporates storage recess hinged lid. 20mm overflow outlet with filter and 20mm inlet that connects via hose (not included) to the pump.
Berley Buckets - Removable
Moulded in one piece high impact, U.V. stable, roto moulded polyethylene. An alloy mounting bracket with twist lock stainless steel pin provides ease of removal for cleaning, storage or for when the vessel is not being used for fishing. Designed for raked transoms of 20º. Supplied with berley 'muncher'.
BLA Height Width DepthCode mm mm mm
395060 435 195 190395090 Spare berley muncher
BLA Height Dia. MountCode Base mm mm mm
395070 360 165 195x105395072 450 175 150x105
395090 Spare berley muncher
BLA Length Width HeightCode mm mm mm
395202 585 340 335
Berley Buckets - Marlin Board Mount
Moulded in one piece high impact polyethylene. Mounts through marlin board or duck board. Supplied with heavy duty aluminium berley 'muncher'. Available in three models for differing transom heights.
Cutting Board to Suit 20L BucketThis versatile cutting board is truly a fisherman’s pal. The two grooves underneath the board allows the board to sit on a 20L bucket so it can be used not only as a bait/fillet board but a seat as well.
BLA DescriptionCode
394880 Cutting board T/S 20L pail white
BLA Depth Width HeightCode mm mm mm
394800 359 430 28
a
b
c
193666 Replacement hingesN.B. Pump is not self priming, requiring gravity feed.
Bucket not included.
BLA Model a b cCode mm mm mm
395050 Small 195 400 125395052 Short 195 450 170395054 Long 255 450 170
395090 Spare berley muncher
www.bla.com.au
Tinnie Storage BinsThe small storage bin and large tinnie storage bin provide smart storage for odds and ends, fishing gear and bait. Moulded from tough polyethylene, the curved bracket fits securely over the gunwale of most tinnies. They incorporate a recessed storage area, drink holder and knife slots.
Fish/Bait BoxesManufactured from white polyethylene with white cutting board lid. Ideal for use as a bait box, fish box, livewell tank or simply for storage.
BLA Size Width Height DepthCode mm mm mm
395002 Small 380 200 205395006 Large 360 290 240
BLA Length Width Height Cut OutCode mm mm mm mm
395222 300 200 190 270x170395224 300 200 215 250395228 300 200 295 270x170395232 395 280 180 355x250395236 400 280 325 360x245
Collapsible Storage BoxConvenient folding storage box, folds to only 65mm high! Four folded boxes use less space than one rigid box, so they will stow away easily, yet are readily available. Very solid construction and design with a weight of only 2 kgs.
Plastic Storage BinsOne hundred and one on board uses including catch bucket, bait bucket, anchor tackle storage, tools or general storage. Ideal for portable live well bait tank setup. Tough yet light weight thermo moulded plastic. Available with or without lid.
BLA Description Length Width HeightCode mm mm mm
394998 Lidded 660 425 275394999 Non lidded 790 500 310
BLA Length Width HeightCode mm mm mm
394990 600 400 315
Tinnie Storage TubeThis waterproof storage bin is ideal for storing mobile phones, watches, flares, etc. It can be flush fitted either horizontally or vertically into any surface behind which is a suitable cavity.
Height mm: 250
Diameter mm: 170
BLA DescriptionCode
395020 Tinnie storage tube
BLA DescriptionCode
395010 Tinnie storage bin standard long395014 Tinnie storage bin deluxe long
Tinnie Storage Bin Standard Long & Deluxe LongManufactured from tough polyethylene, these storage bins are large, durable and easy to clean. They provide smart storage for fishing gear, baits or general storage. The deluxe version features a side pocket and drink holders.
395010
395002
395006
193666 Replacement hinges
section
39
672
FIS
HIN
G A
CC
ES
SO
RIE
S
Quality marine equipment
FIS
HIN
G A
CC
ES
SO
RIE
Ssection
39
673
Quick Release Rod HoldersQuick Release Rod Holders enable tension to be kept on the line while removing the rod after hook-up. The support post mounts in existing rod holder with an ID between 36 & 43mm. Available in single and triple configurations, manufactured from anodised aluminium and U.V. stabilised polyethylene.
3-in-1 Rod HoldersThree rod holders in one. Available in standard and quick release models and rail mount configuration or to fit in a conventional fixed rod holder. Quick release model enables tension to be kept on the line while removing the rod. Manufactured from black HDPE plastic, 50% glass filled nylon and anodised aluminium.
394694Port Side Mount
Coaming Rack HoldersManufactured from black HDPE and anodised aluminium. Enables neat rod storage on board, at home or in the garage. Rod holders can be positioned anywhere along the rails to suit individual requirements.
BLA Capacity Length Height DepthCode mm mm mm
394720 Four rod 585 225 78394722 Six rod 775 225 78
BLA Configuration Mount Release O/all Dim.Code W x D mm
394666 Triple centre Rail Quick 510 x 265394682 Triple starboard Rod holder Standard 510 x 255
BLA Description O/all Dim.Code W x D x H mm
394658 Triple centre 465 x 285 x 460 (closed)394690 Triple starboard 465 x 270 x 460 (closed)394694 Triple port 465 x 270 x 460 (closed)
394690Starboard Side Mount
100
394666
394658
www.bla.com.au
Saddles T/S Cutting Board MountsBlack plastic Saddles for use with cutting board mount.
Post AssemblyPost Assembly to suit cutting board – Rod holder mount. Attaches on the cutting board swivel and fits into a standard rod holder.
Contains:
•300mm,32x1.6mmanodisedtube
•Bottomcross394944
•Taperspacer394942
•Swivelset394946
•Stainlessnutandtri-wheel394947
Tapered SpacerUsed on post assembly to ensure that the posts fit securely into the boats rod holders. Designed to fit on 32mm tube.
SwivelsUsed to adjust bait boards and accessories to the required angle. Male ends of the swivel set are designed to fit into 32 x 1.6mm tube (i.e. approx. 29mm inside diameter). Sold as a pair.
Bottom CrossBottom Cross attaches to the post assembly and locks into the bottom of the boat's standard rod holders. Designed to fit into tube with an inside diameter of approx. 29mm.
Tri Wheel & NutUsed to adjust the swivel to level bait boards and accessories depending on the angle of the boat's rod holders.
BLA DescriptionCode
394930 Saddle adjustable394932 Saddle end
BLACode
394940
BLACode
394942
BLACode
394946
BLACode
394944
BLA DescriptionCode
394947 Tri wheel & nut394948 Tri wheel spring
394930
394932
Rail MountSupplied with rail clamp to suit 25mm tube. Manufactured from 50% glass filled nylon. Utilises six stainless steel metal threads and nuts for attachment. Suits products with a 28mm post.
BLA MountCode
394950 Rail mount394958 Sleeve to fit 22mm rails
Pivot Joint KitUsed in conjunction with the rail mount. Converts fixed mount products with a tube I.D. of 28.5mm to swivelling. Manufactured from 50% glass filled nylon and stainless steel.
160
28
BLA Code
394954
100
75
40
394948
394947
section
39
674
FIS
HIN
G A
CC
ES
SO
RIE
S
Quality marine equipment
FIS
HIN
G A
CC
ES
SO
RIE
Ssection
39
675
BLA DescriptionCode
394642 Rod holder single QR rail mount394646 Rod holder single pistol grip QR rh Mnt
Mini-Troll™ Accessory KitKit includes a rod holder, 1.8kg flash weight and Uni-Line Release for the Mini-Troll™ downrigger.
Dual Rod Holder Front MountFits all 32mm Cannon booms (including the telescopic boom). Two independently adjustable rod holders are made with gimbal and drain hole. Comes with two aluminium tube clamps and a dual mounting bracket.
Dual Rod Holder Rear MountFor fishing two rods off the same downrigger, these two independently adjustable rod holders fit into standard Cannon tube clamp.
Knife HolderHandy knife holder keeps the knives secure and safe when not in use.
Adjustable Rod HolderThree-position configuration delivers fast baitcast or spinning rod pickup. Spring-loaded tension knob allows for quick rod adjustment. Its 360° base can be top or side mounted.
Rod HoldersThis single unit comprises of a quick release rod holder manufactured from black HDPE. Fitted with a sturdy adjustable base (394642) which clamps to a 25mm boat rail. Fitted with a sturdy adjustable base (394646) which is designed to fit into a single existing rod holder.
BLA DescriptionCode
394470 Accessory kit t/s mini troll Cannon
BLA DescriptionCode
394482 Rod holder dual front mount Cannon
BLA DescriptionCode
394484 Rod holder dual rear mount Cannon
BLA DescriptionCode
394794 Knife holder white
Filleting Knife - Floating
Floating fish filleting knife with fluorescent orange handle top. The flexible stainless steel blade is 136mm long. Overall length of knife is 265mm. Supplied with a plastic scabbard which has a stainless steel belt holder.
BLA Code
394792
Fishing Knife Set - 9 Piece Complete fishing knife and accessories set for everyday use.This set includes one each of the following items:
• Filleting knife with flexible 145mm stainless steel blade
• Carving knife with strong 145mm stainless steel blade
• Divers knife with 110mm stainless steel blade, scaler and bottle opener
• Large hand sheers stainless steel blades and cracker
• Holding fork
• Scales with retractable tape measure and compass
• Convenient, easy to use knife sharpener
• Non-slip gloves
• Large 280x190mm plastic cutting board
• Convenient plastic carry case
BLACode
394786
BLA DescriptionCode
394480 Rod holder Cannon
394642 394700
394700 Rod holder single (holder only) t/s Sant Marine394704 Rod holder single QR (holder only)
www.bla.com.au
Anchor WellsMoulded white polyethylene anchor well. Simply cut required hole in foredeck and rivet or screw into place. Fitted with 20mm diameter take-off for drain.
Side ConsoleConverts vessel from tiller control to side console quickly and easily. Features hinged storage lid, two drink holders, sounder/GPS mounting area and ample room for steering, gauges and electrical requirements. Supplied complete with anodised aluminium support legs and mounting fittings. High impact, durable U.V. stable roto moulded polyethylene top.
Sant Centre ConsoleSant Marine console kits converts vessel from tiller control to centre console quickly and easily. Ample room available for steering wheel and engine control, sounder/GPS, instruments and electrical requirements. Constructed of U.V. stable roto moulded polyethylene and provided with two drink holders.
BathyscopeA simple but effective device that eliminates water surface reflection, to allow under water viewing as far as water clarity and light permits. Works in two ways, firstly the clear acrylic lens breaks through the water surface reflection, secondly the light blocking cone, with soft rubber face piece, eliminates reflection on the lens, to provide clear viewing. Breaks down into four interstacking pieces for compact storage. Ideal for reef viewing, checking pots/traps without disturbing, checking moorings, etc. 510 (h) x 335 (dia) mm assembled.
BLA Model Rear Side Front DepthCode mm mm mm mm
395350 Small 540 360 340 200395352 Large 730 460 450 250
BLA Height Width DepthCode mm mm mm
395300 360 600 360
BLA Code
395650
BLA DescriptionCode
395310 Console centre mount395314 Grab rail t/s centre console395318 Windscreen t/s centre console
Fish Scaler - Plastic
A tough, non corrosive plastic economical fish-scaler that is designed for the most demanding use.
BLA DescriptionCode
394798 Fish scaler blue plastic
Console completed
Console completed
Console uncompleted
Console uncompleted
section
39
676
FIS
HIN
G A
CC
ES
SO
RIE
S
Quality marine equipment