Second Class - uoanbar.edu.iq

17
University of Anbar College of Engineering Dept. of Electrical Engineering Fundumental of Electronic I Msc: Munther Naif Thiyab Second Class Chapter02: Diode Applications Lec02_p3 Munther N. Thiyab 2019-2020

Transcript of Second Class - uoanbar.edu.iq

Page 1: Second Class - uoanbar.edu.iq

University of Anbar

College of Engineering

Dept. of Electrical Engineering

Fundumental of Electronic I Msc: Munther Naif Thiyab

Second Class

Chapter02: Diode ApplicationsLec02_p3

Munther N. Thiyab

2019-2020

Page 2: Second Class - uoanbar.edu.iq

1

University of Anbar

College of Engineering

Dept. of Electrical Engineering

Fundumental of Electronic I Msc: Munther Naif Thiyab

Diode Clippers

Clippers are networks that

employ diodes to “clip” away

a portion of an input signal

without distorting the

remaining part of the applied

waveform.

Page 3: Second Class - uoanbar.edu.iq

2

University of Anbar

College of Engineering

Dept. of Electrical Engineering

Fundumental of Electronic I Msc: Munther Naif Thiyab

Biased Clippers

Adding a DC source in series with the clipping diode changes

the effective forward bias of the diode.

Page 4: Second Class - uoanbar.edu.iq

3

University of Anbar

College of Engineering

Dept. of Electrical Engineering

Fundumental of Electronic I Msc: Munther Naif Thiyab

Determining vo for the

diode in the “on” state.

Page 5: Second Class - uoanbar.edu.iq

4

University of Anbar

College of Engineering

Dept. of Electrical Engineering

Fundumental of Electronic I Msc: Munther Naif Thiyab

Determine the output waveform for the network. Example 2.18

Solution

Page 6: Second Class - uoanbar.edu.iq

5

University of Anbar

College of Engineering

Dept. of Electrical Engineering

Fundumental of Electronic I Msc: Munther Naif Thiyab

Determine the output waveform for the network. Example 2.19

Solution

Page 7: Second Class - uoanbar.edu.iq

6

University of Anbar

College of Engineering

Dept. of Electrical Engineering

Fundumental of Electronic I Msc: Munther Naif Thiyab

Parallel Clippers

The diode in a parallel

clipper circuit “clips”

any voltage that forward

bias it.

DC biasing can be added

in series with the diode

to change the clipping

level.

Page 8: Second Class - uoanbar.edu.iq

7

University of Anbar

College of Engineering

Dept. of Electrical Engineering

Fundumental of Electronic I Msc: Munther Naif Thiyab

Determine vo for

the network shown.

Example 2.20

Solution

Page 9: Second Class - uoanbar.edu.iq

8

University of Anbar

College of Engineering

Dept. of Electrical Engineering

Fundumental of Electronic I Msc: Munther Naif Thiyab

Determine vo for

the network if silicon

diode is used.

Example 2.21

.Determining vo for the diode in the “on” state

Solution

Page 10: Second Class - uoanbar.edu.iq

9

University of Anbar

College of Engineering

Dept. of Electrical Engineering

Fundumental of Electronic I Msc: Munther Naif Thiyab

Summary of Clipper Circuits

more…

Page 11: Second Class - uoanbar.edu.iq

10

University of Anbar

College of Engineering

Dept. of Electrical Engineering

Fundumental of Electronic I Msc: Munther Naif Thiyab

Summary of Clipper Circuits

Page 12: Second Class - uoanbar.edu.iq

11

University of Anbar

College of Engineering

Dept. of Electrical Engineering

Fundumental of Electronic I Msc: Munther Naif Thiyab

Clampers

A clamper is a network

constructed of a diode, a resistor,

and a capacitor that shifts a

waveform to a different DC level.

Page 13: Second Class - uoanbar.edu.iq

12

University of Anbar

College of Engineering

Dept. of Electrical Engineering

Fundumental of Electronic I Msc: Munther Naif Thiyab

Clampers

Diode “on” and the capacitor

charging to V volts.

Determining vo with the diode

“off.”

R is chosen such that the discharge

period 5τ=5RC is much larger than

the period T/2→T, and the capacitor

is assumed to hold onto all its charge.

Page 14: Second Class - uoanbar.edu.iq

13

University of Anbar

College of Engineering

Dept. of Electrical Engineering

Fundumental of Electronic I Msc: Munther Naif Thiyab

Clampers

Page 15: Second Class - uoanbar.edu.iq

14

University of Anbar

College of Engineering

Dept. of Electrical Engineering

Fundumental of Electronic I Msc: Munther Naif Thiyab

Example 2.22 Determine vo for the network.

Solution

Determining vo and VC with the

diode in the “on” state.

Determining vo with the diode

in the “off” state.

Page 16: Second Class - uoanbar.edu.iq

15

University of Anbar

College of Engineering

Dept. of Electrical Engineering

Fundumental of Electronic I Msc: Munther Naif Thiyab

Example 2.22

Page 17: Second Class - uoanbar.edu.iq

16

University of Anbar

College of Engineering

Dept. of Electrical Engineering

Fundumental of Electronic I Msc: Munther Naif Thiyab

Summary of Clamper Circuits

Clamping circuits with ideal diodes (5 = 5RC >> T/2).