Equipment that brings together the speed of a foam-in-bag system with the protectiveproperties of an engineered packaging design.

Fast: Instapak® molding equipment can produce 600 cushions per hour on a just-in-time basis.Versatile: Custom inserts can be easily interchanged in the mold cavity to produce engineered cushions for a variety of different products.Protective: Precision fit cushions surround your product to protect it from the rigors of shipping and handling.Cost-Effective: Just-in-time cushion molding saves time and valuable warehouse space versus other fabricated materials.

Instapak® Foam-in-Bag Molding Equipment

Sealed Air® Support Services• Operator Training • Package Design and Testing• Equipment Installation • Site Selection Assistance

Foam-in-Bag Molding ProcessCustom-designed cushions that provide optimum protection are produced quickly and easily by any Instapak® foam-in-bagmolding system.

1. With the push of a button, the SpeedyPacker® system quickly dispenses an Instapak® foam-filled bag.

2. When placed into the vertical mold enclosure, the foam-filled bag is drawn in to the mold by an on-board vacuum.

3. After the cushion has beenallowed to fully expand, the operator removes it with the help of a built-inair ejection system.

4. In under a minute, custom-designed packaging is ready to protect your product during shipping and handling.

Distributed By:

Customer Service Locations:CA, City of Industry, 909-594-1791 OH, Sharonville, 513-771-7770CT, Danbury, 203-791-3550

Corporate Offices: Sealed Air Corporation,Park 80 East, Saddle Brook, NJ 07663-5291 www.sealedair.com© Reg. U.S. Pat. and TM Off. © Sealed Air Corporation 2004. All rights reserved. Printed in the U.S.A. The “9 Dot Logo” and “Sealed Air” are registered trademarks of Sealed Air Corporation (US).

SD-1 Rev. 8/04

Instamolder™ High-Speed Cushion Molding System• Ideal for High Volume Packaging Operations• Up to 12 Molds Available • Up to 600 Cushions Per Hour• Floor Space Requirement: 50 Square Feet• Electrical Power: 30 AMP, 208-240 Volt A.C.

60 Hz Single Phase Dedicated Circuit• Receptacle Type: NEMA L6-30R• Air Requirement: 100 p.s.i. Clean Dry Air

Foam-in-Bag Molding EquipmentThis equipment produces molded cushions for products that requirea consistent, precise fit and engineered protection. If you packagefrom 20 to 2000 products a day, one of these molding systems canproduce protective cushions for your products.

Instapak® Twin Vertical Molding Station• Low Initial Investment• Up to 100 Cushions Per Hour• Floor Space Requirement: 12 Square Feet• Electrical Power: 15 AMP, 110-120 Volt A.C. • Receptacle Type: NEMA 5-15R

Instapak® Molding Wheel• Space Efficient 6-mold Configuration• Up to 300 Cushions Per Hour• Floor Space Requirement: 24 Square Feet• Electrical Power: 15 AMP, 110-120 Volt A.C. • Receptacle Type: NEMA 5-15R• Air Requirement: 100 p.s.i. Clean Dry Air