SCG 60 Manual

download SCG 60 Manual

of 14

Transcript of SCG 60 Manual

  • 8/2/2019 SCG 60 Manual

    1/14

    GSM E1 Channel Bank

    (SCG-60)

    User Manual

    Technology Co., Ltd.

  • 8/2/2019 SCG 60 Manual

    2/14

    Contents

    1.INTRODUCTION ................................................................... 1

    2.SYSTEM CONFIGURATION DIAGRAM ............................2

    3.MECHANISM DIAGRAM.....................................................2

    4. DEVICE LIST & INSTALLATION....................................... 4

    5. WEB PAGE SETTING........................................................... 6

    5.1 System Parameter Setting............................................... 6

    5.1.1 PC Time ................................................................. 6

    5.1.2 System Setup ......................................................... 6

    5.1.3 Card Setup .............................................................7

    5.2 E1 PRI Setting ................................................................ 8

    5.4 Network Setting..............................................................9

    5.5 Account Setting............................................................. 10

    5.6 CDR.............................................................................. 10

    5.7 Online Monitoring ........................................................ 11

    5.8 Log PRI Data ................................................................ 11

  • 8/2/2019 SCG 60 Manual

    3/14

    SCG-60 User Manual

    -1-

    1.Introduction

    GSM E1 Channel Bank(SCG-60) is the newest product after our Digital Mobile

    Trunk(DMT). Each SCG-60 system consists 2 sets of Channel Bank. Channel Bank

    connects to E1 PRI of Exchange or VoIP Trunk Gateway. The 30 PRI channels are

    individually connected to 30 ports of GSM channel, and is a perfect transform device

    between digital circuits to GSM channels. SCG-60 can provide Call Detail Record

    (CDR) for traffic and billing management.

    SCG-60 system can be configured and queried through web page by remote

    console, which includes the network IP setting, password validation, call detail record,

    and monitoring the channel status, etc.

  • 8/2/2019 SCG 60 Manual

    4/14

    SCG-60 User Manual

    -2-

    2.System Configuration Diagram

    SCG-60 consists 2 sets of Channel Bank. One set of Channel Bank connects to

    one ISDN E1 PRI. When an incoming call received from the E1 channel, the MCU

    will retrieve the called number and dial out the number from the corresponding GSM

    channel. These two channels are connected so that this call has been conducted into

    the GSM channel. The incoming call from the GSM channel will be treated in thesame way.

    3.Mechanism diagram

  • 8/2/2019 SCG 60 Manual

    5/14

    SCG-60 User Manual

    -3-

    SCG-60 dimensions: 19" standard cabinet, Height 4U, Depth 42CM.

    It consists 2 sets of channel bank, one set of channel bank consists 5

    x GSM6 and 1 x Trunk MCU.

    GSM : provides 6 GSM ports per card. There are 6 LEDs on the

    front plate, indicating the status of each port.

    [ SCG-60 spec in the GSM6 ]

    Providing 6 channels GSM per card.

    LED GSM status display.

    GSM/GPRSPhase 2+ Compliance

    GSM Frequency bands: Tri Band EGSM 900, DCS 1800and PCS 1900MHZ

    Power Consumption

    Speech Mode230mA(min)260mA(max)

    Standby Mode

  • 8/2/2019 SCG 60 Manual

    6/14

    SCG-60 User Manual

    -4-

    [ Power Card ]

    Input Voltage: AC90-135V, AC180-264V, 50Hz~60Hz.

    Input Current: 8A for 115VAC, 5A for 230VAC.

    Type: Switching.

    Output:+3.3V_28A,+5V_30A,+12V_15A,-5V_0.5A,-12V_1A,+5VSB_2A.

    Total Power: 300W.

    Power Panel.

    4. Device List & Installation

    4.1. Device List

    ATX Power card 110V(or220V)*1

    GSM6 card*10

    Trunk/MCU Card*2Antenna box*2

    4.2. Installation

    (1)Check if all the parts are included.

    (2)Inside the GSM6 card, there are 6 GSM SIM card holders. Put SIM cards in the

    corresponding position.

  • 8/2/2019 SCG 60 Manual

    7/14

    SCG-60 User Manual

    -5-

    (3)Lock up all the antennas in the front of the GSM6 card. (There are 30

    antennas in the antenna box for 5 pieces of GSM6 card)

    (4)Connect the E1/PRI cable for the Trunk/MCU card.

    (5)Connect the network cable for the Trunk/MCU card. The default IP address is

    192.168.0.107. You can change the IP address afterwards.

    Total 30 antennas

    3 2 1

    6 5 4

    3

    2

    14

    5

    6

    12

  • 8/2/2019 SCG 60 Manual

    8/14

    SCG-60 User Manual

    -6-

    (6)Switch the power on.

    5. Web Page Setting

    The supervisor can setup the system parameters or view the CDR by remotely

    login in the web page of the SCG-60. The default IP address is 192.168.0.107. After

    the supervisor connect to the web page, he/she can change the IP address in Network

    setting page(see 4.4 Network setting).If you purchase two sets E1, you have to modify one of the IP address to avoid

    conflict between these two MCU cards.

    5.1 System Parameter Setting

    5.1.1 PC Time

    Synchronize the time of SCG-60 with the PC

    5.1.2 System Setup

    (1) PRI ModeSetup the PRI mode for User(TE)/Network(NT) mode

    E1

    LAN

  • 8/2/2019 SCG 60 Manual

    9/14

    SCG-60 User Manual

    -7-

    (2) Hide the Caller ID : Hide or show the caller ID when dial out from the GSM

    module

    (3) Option for line is not ready : setup the behavior when the corresponding outgoing

    channel is not ready. The option can be 1) Automatically hang up the call by the

    system, or 2) Wait till the incoming call hangs up.

    5.1.3 Card Setup

    GSM Card1~GSM Card5 disable or enable.

  • 8/2/2019 SCG 60 Manual

    10/14

    SCG-60 User Manual

    -8-

    5.2 E1 PRI Setting

    E1 PRI setting : Set up the called number for each of the 30 channels. Also, we can

    enable/disable the usage of each channel.

  • 8/2/2019 SCG 60 Manual

    11/14

    SCG-60 User Manual

    -9-

    5.3 GSM Channel Setting

    GSM Outbound :

    GSM Setup : Setup the mobile number for each GSM channel

    5.4 Network Setting

    Setup the IP address and associated network information for theSCG-60

  • 8/2/2019 SCG 60 Manual

    12/14

    SCG-60 User Manual

    -10-

    5.5 Account Setting

    Setup the user name and password

    5.6 CDR

    View the call detail record

    SCIDSIM card ID

    GSMNumGSM Number

  • 8/2/2019 SCG 60 Manual

    13/14

    SCG-60 User Manual

    -11-

    5.7 Online Monitoring

    GSM System : Show the network usage of the GSM channel

    Signal : Signal strength

    Status : Indicates whether this call is from trunk to GSM, or from GSM to trunk

    Trunk Status : Show the line status, e.g. Ring, HangUp

    5.8 Log PRI Data

    Log the activities of the PRI connection

    Total 30 channels

  • 8/2/2019 SCG 60 Manual

    14/14

    Technology Co., Ltd.

    Tel: 886-2-32341496 - 97

    Fax: 886-2-32341393

    E-mail: [email protected] Website: www.suncomm.com.tw