SATELLITE MIGRATION PROJECTContractor OrientationDreamSatellite.com

SATELLITE FREQUENCY

Homecast

1. Press “menu”, select “installation” and press “ok”.

1. Select “factory reset” and press “ok”.

2

SATELLITE FREQUENCY

Homecast

1. Enter the “access code”, default is “1234”.

1. A prompt will appear, select “yes” and press “ok”.

3

SATELLITE FREQUENCY

Homecast

1. Wait for the Dream Satellite TV Logo to appear. Press “menu”, select “installation” and press “ok”.

1. Go to “dish setup” and press “ok”.

4

SATELLITE FREQUENCY

Homecast

1. Enter “access code”, default is “1234”. 1. Under “transponder”, press “right navigation key” on remote control.

5

SATELLITE FREQUENCY

Homecast

1. Select “new TS” and press “ok”. 1. Enter the following parameters:a. Frequency - 12390

b. Polarity - Verticalc. Symbol Rate - 25600

6

SATELLITE FREQUENCY

Homecast

1. Press “ok” twice. Under “installation”, select “manual search” and press “ok”.

1. Select “frequency” and press “right navigational key” on remote control. Select the “new frequency” added and press “ok”.

7

SATELLITE FREQUENCY

Homecast

1. Go to “network search” and press “right navigational key” to “enable” setting.

1. Press “ok” and a display will show “do you want to save changes?”, select “yes” and press “ok”.

8

SATELLITE FREQUENCY

Homecast

1. Press “exit” button. 2. Under installation. Repeat steps 6-15

but enter the frequency “12430” in step 11.

1. Repeat steps 6-15 but enter the frequency “12470” in step 11.

9

FORMS & FORMATS10

JOB ORDER FORM

Control No.:

Installer Name : Dealer :

Subscriber Name : Subscriber Contact No. :

Address :

Items Replaced :

Low Noise Block (LNB) Converter Others :

Antenna Dish

Bracket

RG-6 Cable

I certify that that the Out-Door-Unit (ODU) has been re-aligned/relocated and my unit is working properly.

Subscriber/Representative Name & Signature