Contractor orientation with pics satellite migration to korea sat5 - dream satellite tv
-
Upload
dishhd-asia -
Category
Self Improvement
-
view
1.352 -
download
0
description
Transcript of Contractor orientation with pics satellite migration to korea sat5 - dream satellite tv
SATELLITE MIGRATION PROJECTContractor OrientationDreamSatellite.com
OBJECTIVE
•Locate active subscribers in assigned area and re-align or relocate their satellite dish to Koreasat 5.
•Accomplish migration of subscribers to new satellite within 3-months.
2
REASON FOR MIGRATION
•Agila II has approximately 2 years left in the orbit.
•Koreasat 5 was launched last August 2006 and has a lifespan of 15 years (until 2021) in the orbit.
3
ANTENNA DISH ORIENTATION
SATELLITE ORIENTATION4
AZIMUTH
ELEVATION
SATELLITE AGILA II KOREASAT 5
Longitude 146° E 113° E
Antenna Direction:• Azimuth• Elevation
120° SE60°
208° SW70°
208 deg SW
120 deg SE
LNB 6-7 o’clock 5 o’clock
SATELLITE FREQUENCY
DAW-Mini 4400/5400
1. Press “menu” button and select “installation”.
2. Go to “factory reset” and press “ok”.
5
SATELLITE FREQUENCY
DAW-Mini 4400/5400
3. Enter “access code”, default is “1234”.
4. Select and press “ok”, wait for the Philippine Multi-Media System, Inc. Logo.
6
SATELLITE FREQUENCY
DAW-Mini 4400/5400
5. The “first installation” prompt will appear, press “ok”.
6. Under “equipment” menu, select “none” and press “ok”.
7
SATELLITE FREQUENCY
DAW-Mini 4400/5400
7. Under “channel search menu”, select “manual” by pressing “green button” on the remote control.
8. Select “Add TP” by pressing the “blue button” on the remote control.
8
SATELLITE FREQUENCY
DAW-Mini 4400/5400
9. Select row of added TP (with check) and go to “freq” column, press “ok” to edit frequency.
10.Enter new frequency “12390” and press “ok”.
9
SATELLITE FREQUENCY
DAW-Mini 4400/5400
11.Go to “S/R” column, press “ok” to edit symbol rate. Enter symbol rate “25600” and press “ok”.
12.Go to “pol” column, press “ok” to edit polarity to “v” (vertical).
10
SATELLITE FREQUENCY
DAW-Mini 4400/5400
13.Repeat steps 8-12 but enter the frequency “12430” in step 10.
14.Repeat steps 8-12 but enter the frequency “12470” in step 10.
11
SATELLITE FREQUENCY
DAW-Mini 4400/5400
15.Press “exit” on remote. Select “network” by pressing “yellow button” on the remote control.
16.Unit will perform “channel scan”, after completion press “exit”.
12
SATELLITE FREQUENCY
DAW-Mini 4400/5400
17.A “warning” prompt will appear, press “ok” to save.
18.Press “exit” to view channels.
13
SATELLITE FREQUENCY
Homecast
1. Press “menu”, select “installation” and press “ok”.
2. Select “factory reset” and press “ok”.
14
SATELLITE FREQUENCY
Homecast
3. Enter the “access code”, default is “1234”.
4. A prompt will appear, select “yes” and press “ok”.
15
SATELLITE FREQUENCY
Homecast
5. Wait for the Dream Satellite TV Logo to appear. Press “menu”, select “installation” and press “ok”.
6. Go to “dish setup” and press “ok”.
16
SATELLITE FREQUENCY
Homecast
7. Enter “access code”, default is “1234”.
8. Under “transponder”, press “right navigation key” on remote control.
17
SATELLITE FREQUENCY
Homecast
9. Select “new TS” and press “ok”. 10.Enter the following parameters:a. Frequency - 12390b. Polarity - Verticalc. Symbol Rate - 25600
18
SATELLITE FREQUENCY
Homecast
11.Press “ok” twice. Under “installation”, select “manual search” and press “ok”.
12.Select “frequency” and press “right navigational key” on remote control. Select the “new frequency” added and press “ok”.
19
SATELLITE FREQUENCY
Homecast
13.Go to “network search” and press “right navigational key” to “enable” setting.
14.Press “ok” and a display will show “do you want to save changes?”, select “yes” and press “ok”.
20
SATELLITE FREQUENCY
Homecast
15.Press “exit” button. 16.Under installation. Repeat steps
6-15 but enter the frequency “12430” in step 11.
17.Repeat steps 6-15 but enter the frequency “12470” in step 11.
21
SATELLITE FREQUENCY
Hyundai-Crystal
1. Press “menu”, select “installation” and press “ok”.
2. Select “factory set” and press “ok”.
22
SATELLITE FREQUENCY
Hyundai-Crystal
3. A prompt will appear “do you want to reset all data?”, press “ok” for “yes”.
4. The “first installation” prompt will appear, press “ok” to save.
23
SATELLITE FREQUENCY
Hyundai-Crystal
5. Wait for “scanning progress” to finish. Press “exit” button.
6. Press “menu”, select “installation” and press “ok”.
24
SATELLITE FREQUENCY
Hyundai-Crystal
7. Select “LNB configuration” and press “ok”.
8. To “add new” satellite, press “red button” on the remote control.
25
SATELLITE FREQUENCY
Hyundai-Crystal
9. A prompt will appear “do you want to add a satellite?”, press “ok” for “yes”.
10.Press “exit” button. Under “installation window, select “TP edit/scan” and press “ok” button.
26
SATELLITE FREQUENCY
Hyundai-Crystal
11.Enter the following parameters:a. TP Frequency - 12390 GHzb. Polarization - Vertical 14Vc. Symbol Rate - 25600 MSPS
12.Select “scan” and press “ok” (Do not press “exit” while scanning is in progress).
27
SATELLITE FREQUENCY
Hyundai-Crystal
13.After scanning, repeat steps 11-12 but enter the frequency “12430” in step 11.
14.Repeat steps 11-12 but enter the frequency “12470” in step 11.
28
SATELLITE FREQUENCY
Hyundai-Crystal
15.Press “exit” after scanning has been completed. Under “installation”, select “scan” and press “ok”.
16.Under “scan”, select “all network scan start” then press “ok” button.
29
SATELLITE FREQUENCY
Hyundai-Crystal
17.You will see the scanning progress. After scanning is done, press “ok”.
18.Exit the installation view by pressing the “exit” button four (4) times.
30
SATELLITE FREQUENCY
ViStar
1. Press “menu”, select “system configuration” and press “ok”.
2. Enter 4-digit “access code”, default is “1234”.
31
SATELLITE FREQUENCY
ViStar
3. Select “factory default” and press “ok”.
4. Enter 4-digit “access code”, default is “1234”.
32
SATELLITE FREQUENCY
ViStar
5. A prompt will appear, “do you want to reset receiver?”, press “ok”.
6. The “welcome” prompt will appear, press “ok”.
33
SATELLITE FREQUENCY
ViStar
7. The “LNB configuration” window will appear, press “ok”.
8. The “Add channels” window will appear, enter the following parameters:
a. Frequency - 12390000b. Symbol Rate - 25600c. Polarization - 14Vd. Search Type - Network
34
SATELLITE FREQUENCY
ViStar
9. Press “ok” to search channels. The message “Searching in process, please wait” will appear. After search is completed, press “ok” to finish.
10.To add another frequency, repeat steps 8-9 but enter the frequency “12430000” in step 8 under “TP2”.
35
SATELLITE FREQUENCY
ViStar
11.Repeat steps 8-9 but enter the frequency “12470000” in step 8 under “TP3”.
12.Press “exit” to finish.
36
FORMS & FORMATS37
JOB ORDER FORM
Control No.:
Installer Name : Dealer :
Subscriber Name : Subscriber Contact No. : Address :
Items Replaced : Low Noise Block (LNB) Converter Others : Antenna Dish Bracket RG-6 Cable
I certify that that the Out-Door-Unit (ODU) has been re-aligned/relocated and my unit is working properly.
Subscriber/Representative Name & Signature