Technical Specification 10515 2010-03-05

Sandvik DP1500 Surface Top Hammer Drills

© 2010 Sandvik Mining and Construction 1 / 4

Sandvik DP1500 is a hydraulic, self-propelled, self-contained, crawler based surface drilling rig equipped with a cabin and a rod changer. DP1500 is designed for efficient production drilling in large quarries or open pit mines and construction work sites. It suits well also for wall control and development works. To cus-tomize the rig it can be equipped with a variety of options to meet special requirements.

Hole Diameter: 89 - 150 mm (3 ½” - 6”)

Rock Tools: 51 and 60 mm ( 2” and 2 3/8” ) rods

Rock Drill: 28 kW

Engine Output: 261 kW

Flushing Air: 14 m3/min, up to 10 bar

Production Capacity: 2,0 Mt/year Total Weight 19 200 kg

Technical Specification 10515 2010-03-05

Sandvik DP1500

© 2010 Sandvik Mining and Construction 2 / 4

HYDRAULIC ROCK DRILL Rock drill type HL 1560T Drill rod diameters 51, 60 mm Drill tube diameters 76, 87 mm Operating pressure 90 - 180 bar Percussion rate 30 - 40 Hz Percussion output power 28 kW Maximum rotation torque 2 050 Nm Shank lubrication Air / oil mist Flushing Air Weight 470 kg

FEED Feed type LF 1514, cylinder Length of feed 8 025 mm Rock drill travel 5 580 mm*

Max. length of starter rod 6 100 mm (20')*

Feed/pull out force 36 kN

Retaining centralizer Pito 15H

Feed extension travel 1 480 mm

Feed swing -56/+52° (-20/+94°)

Feed tilt 11 - 133°

Weight 1 360 kg * W/o hose reel ROD CHANGER Rod changer type RC 1514

Storage capacity (51 mm) 7+1 rods

Rod length 3 660, 4 270 mm Max. hole length (51 mm) 35 m (7x14’ + 1x20’) Weight without rods 500 kg BOOM Boom type ZB 1550 H, telescopic Boom extension 500 mm Boom lift +50/-17° Boom swing -2/+27° Drilling coverage on flat 1.6 m2 Collaring height +1.15 /-3.5 m Horizontal holes To the right CARRIER Carrier type Track mounted Track size FL 6 Grouser plate width 310 mm Ground contact length 2 520 mm Ground pressure 1.2 kg/cm2 Ground clearance 400 mm Oscillation angles +/- 11° Tramming force 140 kN Tramming speed 1.7/3.5 km/h

POWERPACK Engine type Caterpillar C 11 Number of cylinders 6 Engine output 261 kW/2 100 rpm Transmission type Gear box Hydraulic pumps 2 Variable/gear Screw compressor type Enduro 25 Flushing Air capacity 14 m3/min Flushing air pressure up to 10 bar Air cleaner 2 pcs, dry type with

ejector and safety element

Fuel tank 520 l Weight 1 450 kg HYDRAULIC SYSTEM Filtration rate 12 micron abs. Cooling capacity up to +50°C ambient Hydraulic oil tank 420 l Shank lubrication device SLU 18-1 CONTROL SYSTEM Type THC pro RockPilot Collaring system Standard Antijamming system Hydraulic / electric Voltage 24 VDC DUST COLLECTOR Dust collector type DC 1550 Capacity/vacuum 35 m3/min at 1200 mm

vacuum H2O Filter elements/material 20 pcs/fiber Total filter surface 16 m2 Hydraulic motor output 18 kW Primary cyclone PE 80 Movable suction head PE 100 S Weight 290 kg CABIN Cabin type Ergo Pro Certificates F.O.P.S. and R.O.P.S. Controls Drilling and tramming Noise level in the cabin 80 dB (A) Heaters Standard Pressurization Standard Seat Ergonomic, adjustable Vibration dampening Standard Windows Safety laminated, tinted,

with wiper

Technical Specification 10515 2010-03-05

Sandvik DP1500

© 2010 Sandvik Mining and Construction 3 / 4

STANDARD COMPONENTS Rock drill HL 1560T, hydraulic

Feed LF 1514

Rod changer RC 1514

Boom ZB 1550 H, telescopic

Carrier FL 6, oscillating Powerpack Diesel driven, hydraulic pumps and on

board compressor Hydraulic system Load sensing and open center

Control system THC Pro with Rock Pilot

Cabin Ergo Pro

Dust collector DC 1550 H, hydraulic

Working lights 8 pcs

Gauge set For rock drill accumulators Reversing alarm Manuals 1 x paper copy

1 x CD-ROM (ToolMan)

THE JAWS FOR DRILL STEELS

Drill steel type

Drill steel diameter

Recommended hole diameter

Rods / MF rods

51 mm, 2"

89 - 127 mm 3 ½" - 5"

MF-rods 60 mm, 2 3/8"

102 - 140 mm 4" - 5 ½"

Pilot tube 76 mm, 3"

89 - 127 mm 3 ½" - 5"

Pilot tube 87 mm, 3 ½"

102 - 140 mm 4" - 5 ½"

Tubes 76 mm, 3”

89 - 140 mm 3 ½" - 5 ½"

Tubes 87 mm, 3 ½"

102 - 152 mm 4" - 6"

ADJUSTMENT INFORMATION FOR DELIVERY Extension rod lenghts 3 660 mm 12’ 4 270 mm 14’ ROTATION MOTOR Rotation motor OMT 400 for 89 - 127 mm, 3 ½" - 5" holesRotation motor OMT 500 for 127 - 152 mm, 5" - 6" holes

SELECTION OF OPTIONS 1. Heating and air conditioning 2. Rod greasing 3. TIM 5200

4. TIM 5300 (with Depth Measuring)

5. TIM 6300 (with aiming unit + Depth Measuring)

6. TIM 6300 (with GPS compass and Depth Measuring)

7. TIM 6500 (with GPS compass and Depth Measuring with Laser Level)

8. Power extractor 9. Electric filling pump for refuelling 10. Remote control box & hydraulic winch (7 tons) 11. Rollers for rod changer RC 1514 12. Hose reel 13. Three-bar grouser plates 14. Guides for grousers 15. Flushing control automatics 16. Shut-down of suction for water holes 17. Water injection system 18. Water injection system w/o tank 19. Hydraulic ground support HM 75 20. Fuel heater for cabin, hydraulic oil and engine 21. Kit for alternative steels

22. Tube drilling kit

23. Movable drill steel support 24. Horizontal drilling kit (includes hose reel) 25. Towing hook 26. Readyness for Power extractor 27. Extra manuals 28. First service kit for DP1500

29. Special tools for HL 1560T, field kit ID 550 420 18

30. Special tools for HL 1560T, complete ID 550 387 95 31. Central lubrication system 32. Fast fill connection for fuel and water tanks

33. Fast fill connection for engine coolant, hydraulic oil, engine oil 34. Sanrock Mini H hydraulic bit grinder 35. Radio and CD player

36. Biogradeable hydraulic oil, Shell naturelle HFE 46 or HFE 68 (synthetic ester) 37. Antifreeze for air lines 38. Dustmizer system See more detailed option descriptions in Sales Tools

Technical Specification 10515 2010-03-05

Sandvik DP1500

© 2010 Sandvik Mining and Construction 4 / 4

Vertical drilling

Horizontaldrilling, sideways

Vertical drilling

Horizontaldrilling, forwards

1 m

1m

COVERAGE AREA

Weight 19 200 kg

Total width 2.52 m

Height 3.2 m

Total length 10.5 m

Sandvik Mining and Construction reserves the right to change this specification without further notice.

Sandvik Mining and Construction Oy P.O.Box 100, FIN–33311 Tampere, Finland Tel. +358 205 44 121, Telefax +358 205 44 4771 www.sandvik.com

2490

TRAMMING AND TRANSPORT DIMENSIOS

2630

9655

Oikea_palkki: Operators: Maintenance: Technical: Sparepart: Exit: Home: Print: Search: Sandvik: Go_Back: Previous: Next: