[email protected] · in accordance with AS/NZS 1254. Manufactured according to AS/NZS 1260...
Transcript of [email protected] · in accordance with AS/NZS 1254. Manufactured according to AS/NZS 1260...
In 2002, as our Australian marketing network spread, we opened a second major Distribution Centre in Perth, WA. This is now located in Bassendean on an 8000m2 site and services an extensive customer base, on the West Coast. We also opened a new Distribution Centre in Brisbane, Qld in 2010. This is now located in Northgate on a large site and services all our Northern customers. In addition to our National customer base we have developed an important export market for a range of our products that are now sold throughout New Zealand, South East Asia, South Africa and the Middle East.
We are Associate members of many industry groups including The Australian Chamber of Manufacturers, The Association for Hose and Accessories Distribution (NAHAD), The Australian Drilling Industry Association (ADIA), Australian Hides Skins and Leather Exporters Association (AHSLEA) and the National Precast Concrete Association of Australia.
All our products are manufactured to the relevant Australian Standards and tested under strict quality control procedures. We hold numerous Standards Licences and our Steel Reinforcing products have achieved ACRS accreditation (Australian Certification Authority for Reinforcing Steel). All our PVC pipe products are BEP certified (Best Environmental Practice).
Having local manufacture enables us to have control over our manufacturing ensuring a consistently high quality product to meet our clients’ needs. It also provides the flexibility to customise products and to ensure we can meet the most challenging deadlines
Being a privately owned Company we pride ourselves on our ability to supply solutions for customised product or service requests – no matter how difficult, how large or how small such requests are. We have a dedicated and focused team at PlascorpTM that we believe gives us that all important point of difference.
AS/NZS 1477AS/NZS 1260AS/NZS 1254AS/NZS 2053ISO 9001
The Company’s manufacturing history goes back over fifty years with the introduction of the Plasticoat range of industrial coatings and flexible ducting in the late fifties. Our Head Office and Manufacturing Centre in Chambers Road, Altona North, Victoria commenced operations in 1961 and has since grown to accommodate the ever evolving manufactured product range and now covers over three hectares.
PLASCORPTM MANUFACTURES AND SUPPLIES A COMPREHENSIVE RANGE OF UPVC PIPE UNDER THE BRAND NAME PIPEMASTER FOR USE IN IRRIGATION, MINING, DRAINAGE, WATER SUPPLY AND CIVIL MARKET SECTORS THROUGHOUT AUSTRALIA. OUR MAIN PRODUCTS INCLUDE PRESSURE PIPE, BORECASING, ELECTRICAL CONDUIT, STORMWATER, DWV AND VACUUM PIPE. OUR PIPEMASTER PVC PIPE IS MANUFACTURED IN ACCORDANCE TO RELEVANT AUSTRALIAN STANDARDS WHILST ALSO ENSURING COMMITMENT TO STOCK LEVELS, QUALITY, CUSTOMER SERVICE AND PRODUCTION FLEXIBILITY IN SUPPORT OF OUR CUSTOMERS.
3
SPECIFICATION
www.plascorp.com.au
PIPEMASTERTM INTRODUCTION
PVC-U PRESSURE PIPE SERIES 1 RUBBER RING JOINT (RRJ) (AS/NZS1477)
100150200
114.3160.2225.3
151.2213.9
4.55.7
3.235.7
114.3
225.3
104.7
208.5
4.8
8.4
2.4
8.3
666
522815
NOM size(mm)
CLASS 6 CLASS 9
MEAN OD(mm)
MEAN ID(mm)
MEAN Wall(mm)
MASSKg/m
MEAN OD(mm)
MEAN ID(mm)
MEAN Wall(mm)
MASSKg/m
LENGTH/s(m)
PACKQTY
PVC pressure pipes are manufactured in accordance to AS-1477 from PVC resin compounded with stabilisers, lubricants and pigments. They do not contain any plasticisers and hence are known as unplasticised PVC or PVC-U.
PVC-U pipes have been used for pressure applications in Australia since the 1960s, but have a much longer service history elsewhere in the world. Over this time, industry has recognised the many benefits of PVC for pressure pipes: material stability, corrosion resistance, and high strength to weight ratio, ease of handling, installation and excellent flow characteristics.
SPECIFICATION
4www.plascorp.com.au
600600600300270245122104674533181588666
0.20.30.40.60.81.32
2.824.767.359.613.817.422.925364850
666666666666666666
0.20.30.40.60.91.42
3.45.26.89.7
12.3415.53
18242735
29.837.447.153.767
83.898.7126.9155.4177.9220247.5275308
346.5390.5439.9
2531.23949.156.170.287.6103.1132.5162.8185.9229257.7286.4320.8360.9406.5458.1
1520253240506580100125150175
200225250300350375
23.829.837.542.953.86779.1101.7125
142.7180.4203.1225.8252.9284.5320.6361.3
1.51.92.42.73.34.24.96.37.68.89.911.112.313.815.517.519.7
17.822.428.235.540.550.663.274.796.1117.6134.7171.4192.9214.4240.1270.2304.5343.1
1.82.22.73.43.94.96.17.19.111.312.814.416.218
20.222.725.528.8
30.638.544.155.26981.3
104.7128.4146.9185
208.5231.8259.4292.0329.0370.8
1.51.92.12.63.23.84.85.96.77.68.49.310.511.813.314.9
0.20.40.50.71.11.52.64
5.27.6
9.4511.815172027
CLASS 9
MEAN ID(mm)
MEAN Wall(mm)
MASSKg/m
36.646.152.565.681.896.5123.9152
173.7215.4242.1269
301.4339.1382.1430.3
BELLOD(mm)
1520253240506580100125150175
200225250300350375
21.426.833.642.348.360.475.488.9114.3140.2160.3200.2225.3250.4280.4315.5355.5400.5
45.356.871
83.7107.9132.2151.3
213.9237.6266.2299.5337.5380.3
1.51.82.22.63.24
4.5
5.76.47.1
8.09.010.1
0.30.50.71
1.82.73.6
6.58.19
11.51518
51.364
79.894.1
120.7148.2169.3
236.7263.2294.6331.5373.5420.7
NOM size(mm)
CLASS 6
MEAN OD(mm)
MEAN ID(mm)
MEAN Wall(mm)
MASSKg/m
BELLOD(mm)
PVC-U PRESSURE PIPE SERIES 1 SOLVENT WELD (SWJ) (AS/NZS1477)
PVC pressure pipes are manufactured in accordance to AS-1477 from PVC resin compounded with stabilisers, lubricants and pigments. They do not contain any plasticisers and hence are known as unplasticised PVC or PVC-U.
PVC-U pipes have been used for pressure applications in Australia since the 1960s, but have a much longer service history elsewhere in the world. Over this time, industry has recognised the many benefits of PVC for pressure pipes: material stability, corrosion resistance, and high strength to weight ratio, ease of handling, installation and excellent flow characteristics.
CLASS 12
MEAN ID(mm)
CLASS 18
MEAN Wall(mm)
MASSKg/m
LENGTH/s(m)
PACKQTY
NOM size(mm)
MEAN ID(mm)
MEAN Wall(mm)
MASSKg/m
BELLOD(mm)
BELLOD(mm)
5
SPECIFICATION
www.plascorp.com.au
100125150155177
200225250300350375
3.45.26.8NA8
12.3415.53
18242735
67382418181888666
100125150155177
200225250300350375
PVC-U BORECASING SOLVENT WELD (SWJ) (AS/NZ 1477)
Borecasing is a specialised PVC pressure pipe offered to the mining industry. The cased section of any well usually forms a lining or casing for a water bore drilled vertically into the ground and houses the pump, drawing water from the source aquifer to the pump and seals the aquifer from contamination from adjacent zones. In this application, resistance to crushing rather than internal pressure is the key requirement, so the primary consideration is pipe wall thickness for high stiffness.
114.3140.2160.2168.2177.5225.3250.4280.4315.5355.5400.5
104.7128.4146.8154.2
208.5231.8259.4292.0329.0370.8
4.85.96.77
8.49.310.511.813.314.9
101.7125
142.6149.2157.9203.1225.8252.9284.5320.6361.3
6.37.68.89.59.811.112.313.815.517.519.7
NOM size(mm)
CLASS 9 CLASS 12
MEAN OD(mm)
MEAN ID(mm)
MEAN Wall(mm)
MASSKg/m
MEAN ID(mm)
MEAN Wall(mm)
MASSKg/m
96.1118.2135.2
148.7192.9214.4240.1270.2304.5343.1
9.111
12.5
14.416.218.020.222.725.528.8
4.767.359.6
11.717.422.925364850
66666666666
66666666666
67382418181888666
MEAN ID(mm)
MEAN Wall(mm)
MASSKg/m
LENGTH/s(m)
LENGTH/s(m)
PACKQTY
PACKQTY
CLASS 18
NOM size(mm)
2.64
5.2NA
9.4511.815172027
SPECIFICATION
www.plascorp.com.au 6
PVC-U STORMWATER SOLID WALL (SWJ) (AS/NZS1254)
PVC-U DWV SOLID WALL (SWJ) (AS/NZS1260)
Authorities and contractors recognise the cost effectiveness and advantages of long lengths, ease of handling, installation and the proven performance of PVC pipes for stormwater applications. PlascorpTM storm water pipes are available in sizes ranging from 75mm to 300 mm. PlascorpsTM strorm water grade of PVC pipe is manufactured in accordance with AS/NZS 1254.
Manufactured according to AS/NZS 1260 PlascorpsTM DWV (Drain Waste & Vent) is one of the most comprehensive on the market with a full range from 40mm to 225mm in diameter. PVC-U is the predominant material used in DWV applications in Australia.
The advantages of PVC in DWV applications are well accepted, being lightweight, resistant to a wide variety of chemicals, do not support combustion (are approved for multi-storey plumbing in conjunction with approved fire stop collars), they are impervious to bacterial and fungal attack and are not subject to electrolytic corrosion.
75.190.190.190.1
160.3200.3250315
42.955.8568.8582.5110.2
160.25160.25250.35250.35
315315
72.187.186.786.3154.5193.1241304
38.951.4563.4576.7
104.2152.25149.85238.15233.95299.6294.2
1.51.51.71.92.93.64.55.5
22.22.72.934
5.26.18.27.7
10.4
0.60.670.8
12.253.335.54
9
0.350.440.931.211.533.334.256.110
13.0316
66666666
66666666666
122104104104332411
306254171113673333111166
NOM size(mm)
NOM size(mm)
MEAN OD(mm)
MEAN OD(mm)
MEAN ID(mm)
MEAN ID(mm)
MEAN Wall(mm)
MEAN Wall(mm)
MASSKg/m
MASSKg/m
LENGTH/s(m)
LENGTH/s(m)
PACKQTY
PACKQTY
40506580
100 SN6150 SN4150 SN8225 SN4225 SN8300 SN4300 SN8
7590
90 HD90 XHD
150175225300
SPECIFICATION
www.plascorp.com.au 7
50
PVC-U VACUUM PIPE (SWJ)
A pipe subjected to or vacuum internally is subject to a potential stability problem and can undergo a form of unstable collapse if the pressure is sufficiently high, through buckling of the pipe wall. PlascorpTM are proven specialists in the manufacture of vacuum pipe for the installation of ducted vacuum systems throughout Australia.
Our vacuum pipe is available in various diameters and lengths for added flexibility. With an ultra-smooth internal surface PlascorpsTM vacuum pipe offers improved air flow in addition to ensuring minimal material hang-up in operation.
50.8 47.8 1.5 0.4 2.5 & 4 200
NOM size(mm)
MEAN OD(mm)
MEAN ID(mm)
MEAN Wall(mm)
MASSKg/m
LENGTH/s(m)
PACKQTY
17.4520.9527.4534.7543.95
1.751.952.2
2.552.95
0.170.20.310.520.64
15.0519.6526.2533.4542.8554.8579.3102.3125.4143.3206.3
2.42.62.83.23.54
4.86
7.48.59.5
0.190.260.370.520.751.071.873.084.656.1314.5
44444444444
60060036027019520210467453315
NOM size(mm)
ELECTRICAL CONDUIT - MEDIUM DUTY-GREY ELECTRICAL CONDUIT - HEAVY DUTY-ORANGE
MEAN OD(mm)
MEAN ID(mm)
MEAN Wall(mm)
MASSKg/m
MEAN ID(mm)
MEAN Wall(mm)
MASSKg/m
LENGTH/s(m)
PACKQTY
PVC-U ELECTRICAL CONDUIT SOLVENT WELD (SWJ) (AS/NZS2053)
PlascorpTM offers a range of electrical conduit and ducting, manufactured in accordance with AS/NZS 2053, suitable for both commercial and domestic applications. PVC is ideally suited for electrical conduits, both for above and below ground cables as it is non-conductive, lightweight and easy to install.
These conduits are used in buried applications and in buildings either fully exposed or encased in concrete floors. Whilst AS/NZS determines the most common length at 4m long, PlascorpTM has the ability to manufacture custom lengths to suit customer application requirements.
19.8524.8531.8539.8549.8562.8588.9114.3140.2160.3225.3
20253240506380100125150200
SPECIFICATION
8
31.8549.85
6385.1
109.5
27.4543.9556.682.1
104.7
2.22.953.21.52.4
0.310.640.862.283.8
44444
36019520210467
NOM size(mm)
COMMUNICATIONS CONDUIT
MEAN OD(mm)
MEAN ID(mm)
MEAN Wall(mm)
MASSKg/m
LENGTH/s(m)
PACKQTY
COMMUNICATIONS CONDUIT
PlascorpTM rigid wall PVC conduits are used by Australia’s growing telecommunications industry. PVC is ideally suited for electrical conduits, both for above and below ground cables as it is non-conductive, lightweight and easy to install. These conduits are used in buried applications and in buildings either fully exposed or encased in concrete floors.
32506380100
www.plascorp.com.au 9
SPECIFICATION
CUSTOM PVC PIPE PRODUCTS
PlascorpsTM customer focussed ethos extends to production flexibility allowing for custom products to be extruded with ease. Custom colours, sizes, shapes, lengths and formulations set Plascorp apart from other suppliers within the Australian market.
Experts in the extrusion of PVC and the creation of custom finished products. Combining a wealth of in-house engineering design knowledge, polymer formulation and tooling experience, PlascorpTM has the ability to bring customer and industry niche ideas to fruition.
10
SPECIFICATION
THREADING & SLOTTING
PlascorpsTM PVC product range extends to machined, threaded and slotted pipe typically used for drilling and environmental monitoring applications. Modern state of the art process machinery is used to provide a consistent quality product. Perforated pipes with half or full perforations are also available and typically used for sub surface drainage. Threading also provides an alternative joining solution without the need for solvents.
Being a fully integrated manufacturer with in house manufacturing capability enables Plascorp to offer a broad product portfolio along with the opportunity to customise products to meet its client’s specialised requirements.
KEY BENEFITS:// Custom lengths from 1m to 6m// Threading is available in sizes up to 315mm// Slotting is available in sizes up to 500mm// Wide selection of slot patterns and slot widths available.
www.plascorp.com.au
11
SPECIFICATION
DRILL CLAMPS & ELEVATORS
PlascorpsTM Product offering to the drilling industry extends to Clamps and Elevators. These tools are used worldwide by well drillers, pump installers, well servicemen and environmental drillers. With an all steel construction, these tools are designed to last.
KEY BENEFITS:// Range of sizes available// Solid construction// Can be used with an a number of different types of pipe
www.plascorp.com.au
DRILL KKLAMP
CASING ELEVATORS
PVC FLUSH JOINT PIPE CLAMPS
12
SPECIFICATION
DRILL CLAMPS & ELEVATORS
www.plascorp.com.au
DRILL KKLAMP 1 - ADJUSTABLE 1”-2”DRILL KKLAMP 2 - ADJUSTABLE 2.5”-4”DRILL KKLAMP 3 - ADJUSTABLE 3”-6”
// Kwik Klamp allows workers to bring pipe joint up to an easy working level// Easy to operate, over center locking of jaws when downward pressure is applied to lever handle// Larger sizes have a 1/2” safety pin used to prevent accidental unclamping// Can be used with an array of pipe materials
DRILL 4” PVC CASING ELEVATORSDRILL 5” PVC CASING ELEVATORS
// Our PVC Elevators allow safe access to your PVC casing // Safer than ropes, cables or loop chains// 1/2” lock pin and hinges// Fast and safe way to install bell end well casing
DRILL 4” PVC JOINT PIPE CLAMPDRILL 5” PVC JOINT PIPE CLAMPDRILL 6” PVC JOINT PIPE CLAMPDRILL 8” PVC JOINT PIPE CLAMP
// Our light weight and easy to handle Flush Joint Clamps for PVC pipe are developed for the environmental industry
to hold PVC pipe safely // Proper clamp tension must be applied in order to
meet or possibly exceed the load capacity// Load tested to over 2000 lbs. for sizes 3” – 6” PVC pipe// Load tested to over 3000 lbs. for sizes 8”
brand & brochure designtaylorandtaylordesign.com
“ Plascorp reserves the right to change specifications without prior notice ore further advice. Information has been provided to assist with the selection of the Company’s product. It is recommended that the Company be contactedco to assist with the selection of products for specific applications.
The Company disclaims all liability to anyone who relies on the whole or any part of the information provided in the Company’s literature and excludes allpa liability imposed by any statute or by the general law whether statements and representations are made negligently or otherwise except to the extent it is prevented by law from doing so.”
PlascorpTM Pty Ltd45 Chambers RoadAltona North Victoria 3025PO Box 2 Altona NorthVictoria 3025TELEPHONE 1300 301 313FACSIMILE 03 9319 [email protected]
32 Clune Street BassendeanWestern Australia 6054TELEPHONE 08 9379 8922 FACSIMILE 08 9379 8933115B Crockford Street Northgate Queensland 4013TELEPHONE 07 3035 9200 FACSIMILE 07 3035 9201