SAJAP0411N-King Saud University Diesel Storage Tank Project_King Saud University

7/31/2019 SAJAP0411N-King Saud University Diesel Storage Tank Project_King Saud University

1/4

Spec i f i ca t ion sheet

Project:

Area:

King Saud University Diesel Storage Tank Project Obj. ref.: 1007/SHAAD/KSU/12

Steel Storage Tank Internal SurfacesRoof Underside & 1.m Below Roof Underside Shell

Hempel (Saudi Arabia) W.L.L.

Surface preparation:Stripe coat all hidden difficult areas : weld seams, edges, corners, etc. using paint brushprior to full spray coat application.NOTE :1). Please follow the minimum and maximum recoating time interval of each productgiven below. If maximum recoating interval is exceeded, roughening of the surface bysweepblasting or sanding is necessary to obtain good intercoat adhesion.2). This Painting Specification is made based on client's specification.3). Consult the Product Data Sheets for further technical information and clarification.

Oil and grease etc. to be removed by strong detergent solution or with Hempel'sNavi-Wash 99330 followed by thorough fresh water rinsing. Entire area to be (highpressure) fresh water cleaned in order to remove salts and other contaminants. When thesurface is dry: Abrasive blasting to minimum Sa 2 according to ISO 8501-1:2007 with asurface profile corresponding to Rugotest No. 3 BN 11a or Keane-Tator Comparator Disc,5.5 G/S. Dedust and clean surface prior to painting.

Product name (including quality number)

Treated area% Shade

Shade no.

Film thickness

(micron)

Wet Dry (sqm/ltr) Brush

Roller

Spray

Nozzleorifice

Recommended

Nozzlepressure

Application methodsTheoretical spreadingrate

HEMPADUR 15590 100 Red brown 56880 100 40 .021" 150 bar 11.0 (X) Xf/c

HEMPADUR 15400 100 White 10000 175 80 .021" 200 bar 6.0 (X) (X) Xf/cHEMPADUR 15400 100 Light red 50900 175 80 .021" 200 bar 6.0 (X) (X) Xf/c

t/u: touch up f /c: full coat s/c: stripe coat Total d.f.t. 200 X: Recommended (X): Possible

Recoating intervals. Ample ventilation Hrs=Hour(s) Mth=Month(s) N/R=Not Recommended

Quality no

D.F.T.

(micron)

Recoated withquality no

40C 30C 20C 10C 0C -10C

Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max.

3 Hrs 12 Day 5 Hrs 20 Day 8 Hrs 30 Day 18 Hrs 67 Day N/R N/R N/R N/R1540015590 40

10 Hrs 21 Day 10 Hrs 21 Day 10 Hrs 21 Day 10 Hrs 21 Day 10 Hrs 21 Day 10 Hrs 21 Day1540015400 80

Hempel's PreSale System 2.6.17 (Build 756)

Printed at: Environment :

1Page:

10.07.2012 15:18

User name:

Department name:

Created/Last modified: 10.07.2012 15:18

Quality Code:JEFFREY PAPA

TSD Immersion

SAJAP0411N

Remarks and Product information see next page.

HEMPEL


2/4


Project:

Area:


Steel Storage Tank Internal Surfaces


Product information:

Shade no.

Volumesolids %

Curingagent

Mixing ratiovolume

Pot life Dry to touch Application restrictions

Thinner

Flashpoint Min. Temp. Max. RH%

20C 20C C C

HEMPADUR 15590 56880 44 95100 15 : 4 2 h 3 h 26 08450 5 80

HEMPADUR 15400 10000 48 95100 4 : 1 2 h 8 h 26 08450 10 80

HEMPADUR 15400 50900 48 95100 4 : 1 2 h 8 h 26 08450 10 80

Remarks:

Normal good painting practice must be followed throughout the entire painting procedure.



2Page:

10.07.2012 15:18

User name:

Department name:



TSD Immersion

SAJAP0411N

The data, specifications, directions and recommendations (hereinafter "Information") given in this painting specification are based upon test results obtained under controlled or specifically defined conditions and said Information is correct to thebest of our knowledge. The User must satisfy itself that it is appropriate to use the Product in accordance with the Information in the actual conditions under which the Product is intended to be used, and the Manufacturer and Seller do notguarantee the accuracy, completeness or appropriateness of the Information when the Product is used in those conditions. The provisions of Clause 8 of the GENERAL CONDITIONS OF SALE, DELIVERY AND SERVICE shall apply to any andall claims arising out of or in connection with the use of the Product as recommended above, overleaf or otherwise.

HEMPEL


3/4


Project:

Area:


Steel Storage Tank Internal SurfacesBottom & 1.m Above Bottom Shell


Surface preparation:Stripe coat all hidden difficult areas : weld seams, edges, corners, etc. using paint brushprior to full spray coat application.NOTE :1). Please follow the minimum and maximum recoating time interval of each productgiven below. If maximum recoating interval is exceeded, roughening of the surface bysweepblasting or sanding is necessary to obtain good intercoat adhesion.2). This Painting Specification is made based on client's specification.3). Consult the Product Data Sheets for further technical information and clarification.

Oil and grease etc. to be removed by strong detergent solution or with Hempel'sNavi-Wash 99330 followed by thorough fresh water rinsing. Entire area to be (highpressure) fresh water cleaned in order to remove salts and other contaminants. When thesurface is dry: Abrasive blasting to minimum Sa 2 according to ISO 8501-1:2007 with asurface profile corresponding to Rugotest No. 3 BN 11a or Keane-Tator Comparator Disc,5.5 G/S. Dedust and clean surface prior to painting.

Product name (including quality number)

Treated area% Shade

Shade no.

Film thickness

(micron)

Wet Dry (sqm/ltr) Brush

Roller

Spray

Nozzleorifice

Recommended

Nozzlepressure

Application methodsTheoretical spreadingrate

HEMPADUR 15590 100 Red brown 56880 100 40 .021" 150 bar 11.0 (X) Xf/c

HEMPADUR 15400 100 White 10000 175 80 .021" 200 bar 6.0 (X) (X) Xf/cHEMPADUR 15400 100 Light red 50900 175 80 .021" 200 bar 6.0 (X) (X) Xf/c

t/u: touch up f /c: full coat s/c: stripe coat Total d.f.t. 200 X: Recommended (X): Possible

Recoating intervals. Ample ventilation Hrs=Hour(s) Mth=Month(s) N/R=Not Recommended

Quality no

D.F.T.

(micron)

Recoated withquality no

40C 30C 20C 10C 0C -10C

Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max.

3 Hrs 12 Day 5 Hrs 20 Day 8 Hrs 30 Day 18 Hrs 67 Day N/R N/R N/R N/R1540015590 40

10 Hrs 21 Day 10 Hrs 21 Day 10 Hrs 21 Day 10 Hrs 21 Day 10 Hrs 21 Day 10 Hrs 21 Day1540015400 80



3Page:

10.07.2012 15:18

User name:

Department name:



TSD Immersion

SAJAP0411N

Remarks and Product information see next page.

HEMPEL


4/4


Project:

Area:


Steel Storage Tank Internal Surfaces


Product information:

Shade no.

Volumesolids %

Curingagent

Mixing ratiovolume

Pot life Dry to touch Application restrictions

Thinner

Flashpoint Min. Temp. Max. RH%

20C 20C C C

HEMPADUR 15590 56880 44 95100 15 : 4 2 h 3 h 26 08450 5 80

HEMPADUR 15400 10000 48 95100 4 : 1 2 h 8 h 26 08450 10 80

HEMPADUR 15400 50900 48 95100 4 : 1 2 h 8 h 26 08450 10 80

Remarks:

Normal good painting practice must be followed throughout the entire painting procedure.



4Page:

10.07.2012 15:18

User name:

Department name:



TSD Immersion

SAJAP0411N

The data, specifications, directions and recommendations (hereinafter "Information") given in this painting specification are based upon test results obtained under controlled or specifically defined conditions and said Information is correct to thebest of our knowledge. The User must satisfy itself that it is appropriate to use the Product in accordance with the Information in the actual conditions under which the Product is intended to be used, and the Manufacturer and Seller do notguarantee the accuracy, completeness or appropriateness of the Information when the Product is used in those conditions. The provisions of Clause 8 of the GENERAL CONDITIONS OF SALE, DELIVERY AND SERVICE shall apply to any andall claims arising out of or in connection with the use of the Product as recommended above, overleaf or otherwise.

HEMPEL

SAJAP0411N-King Saud University Diesel Storage Tank Project_King Saud University

Documents

Transcript of SAJAP0411N-King Saud University Diesel Storage Tank Project_King Saud University