S U S T A I N A B L E G A S T E C H N O L O G Y Project ... · - Team ”ECOTEST” organised by...
Transcript of S U S T A I N A B L E G A S T E C H N O L O G Y Project ... · - Team ”ECOTEST” organised by...
S U S T A I N A B L E G A S T E C H N O L O G Y
Danish Gas Technology Centre
Project ECOTEST
Evaluation of the standards used and measurement reproducibility of EU laboratories (for the application of Ecodesign requirements and labelling of heating and hot water production appliances)
Danish Gas Technology Centre
S U S T A I N A B L E G A S T E C H N O L O G Y
Introduction: Ecodesign and labelling regulations, SCOPE Ecodesign and labelling, DATA MEASURED PROJECT OBJECTIVES PROJECT ORGANISATION RESULTS
Danish Gas Technology Centre
S U S T A I N A B L E G A S T E C H N O L O G Y
Introduction
Ecodesign and labelling directives(*), SCOPE
(*) (EU) No 811/12/13/14 2013
Danish Gas Technology Centre
S U S T A I N A B L E G A S T E C H N O L O G Y
(EU) No 811/12/13/14 2013
Energy labelling
Ecodesign requirements
Space heaters 811 813 Water heaters 812 814
Danish Gas Technology Centre
S U S T A I N A B L E G A S T E C H N O L O G Y
Gas boilers and water heaters
Appliances in the scope
Danish Gas Technology Centre
S U S T A I N A B L E G A S T E C H N O L O G Y
Electric and gas heat pumps
Danish Gas Technology Centre
S U S T A I N A B L E G A S T E C H N O L O G Y
mCHP
Danish Gas Technology Centre
S U S T A I N A B L E G A S T E C H N O L O G Y
Fuel oil and solar
Danish Gas Technology Centre
S U S T A I N A B L E G A S T E C H N O L O G Y
Ecodesign and labelling. DATA MEASURED
Danish Gas Technology Centre
S U S T A I N A B L E G A S T E C H N O L O G Y
Heating Hot water
Danish Gas Technology Centre
S U S T A I N A B L E G A S T E C H N O L O G Y
Data sheets: what to measure?
- Heat output (Full load and 30%)
- Heating efficiency
Example for boilers and cogeneration heaters
Danish Gas Technology Centre
S U S T A I N A B L E G A S T E C H N O L O G Y
- Electrical Efficiency (mCHP)
- Standby loss
- Sound power
- El.consumption
- Etc.
Example for boilers and cogeneration heaters
Danish Gas Technology Centre
S U S T A I N A B L E G A S T E C H N O L O G Y
CEN standards for the application of the regulation (testing and measurement) Example: El. heat pumps: Many are new !
- Can the laboratories measure in a reproducible way? - Are the standard good enough to garanty reproducible testing?
Danish Gas Technology Centre
S U S T A I N A B L E G A S T E C H N O L O G Y
Why is it important?
?
Danish Gas Technology Centre
S U S T A I N A B L E G A S T E C H N O L O G Y
PROJECT OBJECTIVES
Danish Gas Technology Centre
S U S T A I N A B L E G A S T E C H N O L O G Y
Overall objectives 1: EVALUATION OF EU LABORATORIES: “to provide for each parameter measured for the application of (EU) No 811/12/13/14 2013 and each appliance a value of the inter-laboratory reproducibility obtained with the test procedures of the corresponding standard developed”
2: EVALUATION OF EU STANDARDS: “to propose improvements of the procedures from the standards” 3: EVALUATION OF EU market surveillance TOLERANCES: “to propose for all parameters and appliances tested a value of a reasonable tolerance that shall be used for the market surveillance”.
Danish Gas Technology Centre
S U S T A I N A B L E G A S T E C H N O L O G Y
PROJECT ORGANISATION
Danish Gas Technology Centre
S U S T A I N A B L E G A S T E C H N O L O G Y
Process leading to the project
- Spring 2017: Call for tender (mandated work EU to CEN)
- Team ”ECOTEST” organised by DGC and LABTQ partners + others
- Summer 2017: ”ECOTEST” WINNING the tender
- October 2017: ECOTEST starts (21 months)
9th PIM Forum, Berlin March 15-16. 2016
Danish Gas Technology Centre
S U S T A I N A B L E G A S T E C H N O L O G Y
Project structure
WP 1 Emissions -(including sound power level)- CEN/TC 238
WP2 Uncertainty calculation method / templates
WP3 Sanitary hot water work package - CEN/TC 109 WP4 mCHP - CEN/CENELEC JWG FCGA WP5 GHP - CEN/TC 299 WP6 Fuel oil boilers - CEN/TC 57 WP7 Electrical heat pumps - CEN/TC 113 WP8 Solar heaters - CEN/TC 312
Specific WP for gas & oil based technologies
Horizontal WP servicing all WPs
Product based WPs
Danish Gas Technology Centre
S U S T A I N A B L E G A S T E C H N O L O G Y
Project team
WP1 WP2 WP3 WP4 WP5 WP6 WP7 WP8 1 DGC (Co) Denmark X X X X X X X X 1 DGC Denmark WPL X X X X X - - 2 INIG Poland X X X X - X - - 3 Kiwa NL NL X X X X - - - - 4 EBI Germany X X WPL WPL - X - - 5 GAS.BE Belgium X X X X - X - - 6 Kiwa UK UK X X X X - WPL X - 7 CETIAT France X WPL X X WPL X X X 8 IGE Germany - X X - - - X - 9 Applus Spain X X X - - X - -
10 IMQ Italy X X X - - - X - 11 KIWA IT Italy - X X - - - - - 12 CATIM Portugal X X X - - - - -
13 SPF Switzerland - X - - - - - WPL
14 ITW Germany - X - - - - - X
15 DTU Denmark - X - - - - - X
16 TI Denmark - X - - - - X -
17 AIT Austria - X - - - - X -
18 WT Switzerland - X - - - - X -
19 ISE Germany - X X - X - WPL X
20 Polimi Italy - X X - X - - -
21 TÜV Rh. Germany - X - - - x - -
22 TÜV SÜD Germany - X - - - x - -
22 partners – 12 countries
Danish Gas Technology Centre
S U S T A I N A B L E G A S T E C H N O L O G Y
. EU
. VHK
Input to the EU regulation revision process
Co-ordination with CEN & EU
Danish Gas Technology Centre
S U S T A I N A B L E G A S T E C H N O L O G Y
Project activities Round Robin Tests = Laboratory inter-comparisons
The same appliance is circulated to different labs and tested with the same method
Danish Gas Technology Centre
S U S T A I N A B L E G A S T E C H N O L O G Y
Appliances under test
• 2 gas boilers • 2 gas water heaters • 1 fuel oil boiler • 1 gas heat pump • 1 Stirling mCHP • 1 ICE mCHP • 1 Fuel cell mCHP • 4 Electrical heat pumps • 2 Solar systems
15 appliances presently tested
Danish Gas Technology Centre
S U S T A I N A B L E G A S T E C H N O L O G Y
laboratories Test calendar for Wp1-6
Danish Gas Technology Centre
S U S T A I N A B L E G A S T E C H N O L O G Y
RESULTS (no test results yet)
End of test planned for Dec. 2018
Danish Gas Technology Centre
S U S T A I N A B L E G A S T E C H N O L O G Y
We expect an improved reproducibility & improved test methods
Reproducibility influence factors
Danish Gas Technology Centre
S U S T A I N A B L E G A S T E C H N O L O G Y
Results
1) Improvement of standards based on On-going analysis of standards with brainstorming Revision of the test procedure based on test results from the
Round Robin tests
2) Improvement of laboratory reproducibility based on: A common understanding of test procedures Identification of weak points by laboratories Improvement of the accuracy for the weakest part of the
measurement chain Better standards
Danish Gas Technology Centre
S U S T A I N A B L E G A S T E C H N O L O G Y
Conclusion
The work is progressing well – see you next year for the results!