1

S_DIAL WORK CBG FOR CYLINDER BORE GAUGE MEASUREMENT

Your 2-point Cylinder Bore Gauge measurement - Easy, Quick and Safe

For increased simplicity of use and more performance in 2-point cylinder bore gauge measurement, Sylvac, experts in connected metrology, launches its new S_Dial WORK CBG (Cylinder Bore Gauge).

Ref. 805.6317S_Dial WORK CBG Smart

12.5mm/0.001mmAdvantages

• Preset in the ring gauge by pressing the new button «PRESET MASTER» on the top right.

• Bore gauge value (minimum diameter) is automatically displayed when the reversal point is reached.

• Data transmission easy and safe thanks to Bluetooth® or cable connection.

• Data management (monitoring, saving, export) thanks to our Sylcom and Vmux software.

• Display of tolerances.• 4 Preset memories.• Simplicity and Efficiency.• The same CGB dial gauge can be used with different bore gauges.

1

2

3 4

5

2

SYLVAC SA · Experts in connected metrology 3rd May 2019 admin@sylvac.ch

Sincerely YoursSylvac Sales Team

Get started, step-by-step:

1. The CBG dial gauge is ready-to-use for CBG measurement. Factory settings are:

2. Set the PRESET value of 42.500mm (corresponding to the ring gauge 42.500mm) in the CBG dial gauge.

3. Press CLEAR, insert the CBG in the ring gauge 42.500mm and find the reversal point (MIN).

4. When the MIN value is reached (display frozen), press the button PRESET MASTER. You do not need to keep the CBG in the ring gauge.

5. Your CBG is ready to make measurements. It is mandatory to CLEAR the value after each measurement if your CBG is not connected. The CLEAR is automatically made by pressing the central button for data transmission when your CBG dial gauge is connected.

• MIN function always activated.• Preset of the master thanks to the new button PRESET MASTER

on the top right.• Dynamic preset based on the MIN value and not on the effective

physical position of the dial gauge.

Data transmission into Sylcom