S 355 JR
-
Upload
pcorreia68 -
Category
Documents
-
view
956 -
download
0
Transcript of S 355 JR
Group
Subgroup
Structural and constructional steels
Material properties
Comment
Application
EN 10025 Hot rolled products of non-alloy structural steels
Technical delivery conditions
-
S 355 JR (European Union / EN)Material
MinDimension Max Approx
Yield Stress[MPa]
Long and flat products; <= 1 mm; (long.) 355 - -
Long and flat products; <= 1 mm; (trans.) 355 - -
Long and flat products; > 1 <= 1.5 mm; (long.) 355 - -
Long and flat products; > 1 <= 1.5 mm; (trans.) 355 - -
Long and flat products; > 1.5 <= 2 mm; (long.) 355 - -
Long and flat products; > 1.5 <= 2 mm; (trans.) 355 - -
Long and flat products; > 2 <= 2.5 mm; (long.) 355 - -
Long and flat products; > 2 <= 2.5 mm; (trans.) 355 - -
Long and flat products; > 2.5 <= 3 mm; (long.) 355 - -
Long and flat products; > 2.5 <= 3 mm; (trans.) 355 - -
Long and flat products; > 3 <= 16 mm; (long.) 355 - -
Long and flat products; > 3 <= 16 mm; (trans.) 355 - -
Long and flat products; > 16 <= 40 mm; (long.) 345 - -
Long and flat products; > 16 <= 40 mm; (trans.) 345 - -
Long and flat products; > 40 <= 63 mm; (long.) 335 - -
Long and flat products; > 40 <= 63 mm; (trans.) 335 - -
Long and flat products; > 63 <= 80 mm; (long.) 325 - -
Long and flat products; > 63 <= 80 mm; (trans.) 325 - -
Long and flat products; > 80 <= 100 mm; (long.) 315 - -
Long and flat products; > 80 <= 100 mm; (trans.) 315 - -
Long and flat products; > 100 <= 150 mm; (long.) 295 - -
Long and flat products; > 100 <= 150 mm; (trans.) 295 - -
Long and flat products; > 150 <= 200 mm; (long.) 285 - -
Long and flat products; > 150 <= 200 mm; (trans.) 285 - -
Long and flat products; > 200 <= 250 mm; (long.) 275 - -
Long and flat products; > 200 <= 250 mm; (trans.) 275 - -
Page 1
All Rights Reserved © 1999-2005 INI International
MinDimension Max Approx
Tensile Stress[MPa]
Long and flat products; <= 1 mm; (long.) 510 680 -
Long and flat products; <= 1 mm; (trans.) 510 680 -
Long and flat products; > 1 <= 1.5 mm; (long.) 510 680 -
Long and flat products; > 1 <= 1.5 mm; (trans.) 510 680 -
Long and flat products; > 1.5 <= 2 mm; (long.) 510 680 -
Long and flat products; > 1.5 <= 2 mm; (trans.) 510 680 -
Long and flat products; > 2 <= 2.5 mm; (long.) 510 680 -
Long and flat products; > 2 <= 2.5 mm; (trans.) 510 680 -
Long and flat products; > 2.5 <= 3 mm; (long.) 510 680 -
Long and flat products; > 2.5 <= 3 mm; (trans.) 510 680 -
Long and flat products; > 3 <= 16 mm; (long.) 490 630 -
Long and flat products; > 3 <= 16 mm; (trans.) 490 630 -
Long and flat products; > 16 <= 40 mm; (long.) 490 630 -
Long and flat products; > 16 <= 40 mm; (trans.) 490 630 -
Long and flat products; > 40 <= 63 mm; (long.) 490 630 -
Long and flat products; > 40 <= 63 mm; (trans.) 490 630 -
Long and flat products; > 63 <= 80 mm; (long.) 490 630 -
Long and flat products; > 63 <= 80 mm; (trans.) 490 630 -
Long and flat products; > 80 <= 100 mm; (long.) 490 630 -
Long and flat products; > 80 <= 100 mm; (trans.) 490 630 -
Long and flat products; > 100 <= 150 mm; (long.) 470 630 -
Long and flat products; > 100 <= 150 mm; (trans.) 470 630 -
Long and flat products; > 150 <= 200 mm; (long.) 450 630 -
Long and flat products; > 150 <= 200 mm; (trans.) 450 630 -
Long and flat products; > 200 <= 250 mm; (long.) 450 630 -
Long and flat products; > 200 <= 250 mm; (trans.) 450 630 -
MinDimension Max Approx
Elongation A5 [%]
Long and flat products; <= 1 mm; (long.) 14.0 - -
Lo = 80 mmNote:
Long and flat products; <= 1 mm; (trans.) 12.0 - -
Lo = 80 mmNote:
Long and flat products; > 1 <= 1.5 mm; (long.) 15.0 - -
Lo = 80 mmNote:
Long and flat products; > 1 <= 1.5 mm; (trans.) 13.0 - -
Lo = 80 mmNote:
Page 2
All Rights Reserved © 1999-2005 INI International
MinDimension Max Approx
Elongation A5 [%]
Long and flat products; > 1.5 <= 2 mm; (long.) 16.0 - -
Lo = 80 mmNote:
Long and flat products; > 1.5 <= 2 mm; (trans.) 14.0 - -
Lo = 80 mmNote:
Long and flat products; > 2 <= 2.5 mm; (long.) 17.0 - -
Lo = 80 mmNote:
Long and flat products; > 2 <= 2.5 mm; (trans.) 15.0 - -
Lo = 80 mmNote:
Long and flat products; > 2.5 <= 3 mm; (long.) 18.0 - -
Lo = 80 mmNote:
Long and flat products; > 2.5 <= 3 mm; (trans.) 16.0 - -
Lo = 80 mmNote:
Long and flat products; > 3 <= 16 mm; (long.) 22.0 - -
Long and flat products; > 3 <= 16 mm; (trans.) 20.0 - -
Long and flat products; > 16 <= 40 mm; (long.) 22.0 - -
Long and flat products; > 16 <= 40 mm; (trans.) 20.0 - -
Long and flat products; > 40 <= 63 mm; (long.) 21.0 - -
Long and flat products; > 40 <= 63 mm; (trans.) 19.0 - -
Long and flat products; > 63 <= 80 mm; (long.) 20.0 - -
Long and flat products; > 63 <= 80 mm; (trans.) 18.0 - -
Long and flat products; > 80 <= 100 mm; (long.) 20.0 - -
Long and flat products; > 80 <= 100 mm; (trans.) 18.0 - -
Long and flat products; > 100 <= 150 mm; (long.) 18.0 - -
Long and flat products; > 100 <= 150 mm; (trans.) 18.0 - -
Long and flat products; > 150 <= 200 mm; (long.) 17.0 - -
Long and flat products; > 150 <= 200 mm; (trans.) 17.0 - -
Long and flat products; > 200 <= 250 mm; (long.) 17.0 - -
Long and flat products; > 200 <= 250 mm; (trans.) 17.0 - -
MinDimension Max Approx
Impact [J]
Long and flat products; > 3 <= 16 mm; (long.) 27 - -
Charpy V Notch; 10 - 150 mmImpact Test:
Long and flat products; > 16 <= 40 mm; (long.) 27 - -
Charpy V NotchImpact Test:
Long and flat products; > 40 <= 63 mm; (long.) 27 - -
Charpy V NotchImpact Test:
Long and flat products; > 63 <= 80 mm; (long.) 27 - -
Charpy V NotchImpact Test:
Long and flat products; > 80 <= 100 mm; (long.) 27 - -
Charpy V NotchImpact Test:
Page 3
All Rights Reserved © 1999-2005 INI International
MinDimension Max Approx
Impact [J]
Long and flat products; > 100 <= 150 mm; (long.) 27 - -
Charpy V NotchImpact Test:
Long and flat products; > 150 <= 200 mm; (long.) 23 - -
Charpy V NotchImpact Test:
Long and flat products; > 200 <= 250 mm; (long.) 23 - -
Charpy V NotchImpact Test:
Min Max
Chemical Composition [%]
Criterion Approx
C - 0.2400 -
Si - 0.5500 -
Mn - 1.6000 -
P - 0.0450 -
S - 0.0450 -
N - 0.0070 -
- C Depending on thickness
- N Depending on P- content N < 0.012%
Cross Reference Table
Standard CountryMaterial
FranceS 355 JR AFNOR NF
USAA 572 Grade 50 ASTM
United KingdomS 355 JR B.S.
GermanyS355JR / Fe 510 B DIN
European Union1.0045 EN
European UnionFe 510 B EN
YugoslaviaC 0561 JUS
HungaryFe 355 B MSZ
BelgiumS 355 JR NBN
NorwayS 355 JR NS
Sweden2172 SS
SpainS 355 JR UNE
ItalyS 355 JR UNI
ItalyFe 510 B UNI
Germany1.0045 WN
Page 4
All Rights Reserved © 1999-2005 INI International