RSM Catalog
Transcript of RSM Catalog
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 1
Catalog RSM Distribution was established as a home based “Cottage Industry” in December 1989 in order to provide a source for
those hard to find control line products that were disappearing quickly from the local hobby shop shelves. The initial
emphasis in the early years was on items such as line clips, fuel tanks, control line engines, flying lines and similar
hardware.
By 1992 it became apparent that quality control line kits were simply unavailable. Most manufacturers were eliminating
the C/L kits, concentrating on one or two simple profiles or a selection of 1/2A basic starter kits and the balance of their
production going to R/C kits. A control line flyer who wished to build anything other than a Ringmaster, Shoestring or
one of the few kits produced by SIG was forced to obtain a set of plans and scratch build. For this reason RSM
Distribution decided to get involved in kit design and manufacturing. This decision required that the company cease being
a home-based “Cottage Industry” and concentrate full time on control line supply. An industrial unit was rented and the
company moved from the owner’s garage to a warehouse/manufacturing location.
The popularity of the VSC showed that many control line flyers enjoyed the Old Time and Classic designs, which many
of us grew up with. It was decided that RSM’s primary concentration would be in this class of kits using only “contest”
weight balsa. In this way the company could provide kits that were lightweight and capable of contest level performance.
In 2001 we invested in a laser cutter. Although the machine was very expensive it offered extreme accuracy and the
ability to make very intricate cut patterns. The result was to allow RSM to produce the finest control line kit in the
marketplace. We started with the Warburton Tony and Tucker Special in 1992 and as of July 2013 we produce over 55
kits. We plan to continue to add more kits each year.
Control line kit production automatically lead the company into producing its own line of high quality control hardware
such as wire flap & elevator horns, wing tip weight boxes, flap/elevator “Lucky Boxes”, adjustable lead out guides,
carbon fiber bellcranks, stainless steel control lines, line wrapping kits, eyelets and sleeves. RSM Distribution has
responded to the increased popularity of electric power by providing electric flight components as well as complete Sport
Level and Competition Level electric power systems.
Our company policy is to continually seek out new products that can be used by the control line flyer, stock those
products or have them manufactured if they are not available and continue to add new control line kits. RSM Distribution
promises that it will always deliver products ordered as quickly as possible.
We promise that if a product is not available at the time you order it we will tell you that it is out of stock and also that we
will tell you when we expect to receive new stock. We will never cash your check or charge your credit card until the
product is actually shipped. In addition to these promises RSM Distribution guarantees if you are not completely
satisfied with any product you purchase we will either replace the product or refund your money in full. This is the
way we have done business in the past and it is the only way we will ever do business in the future.
RSM DISTRIBUTION
21899 Heliotrope Ln
Wildomar, CA 92595
Ph: (951) 678-1406
http://www.rsmdistribution.com -- [email protected]
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 2
RSM CONTROL LINE KITS RSM Controline Products kits use only the lightest, hand selected, Contest Balsa.
All parts are machine-cut and sanded.
RSM Controline Products guarantees complete satisfaction for all our kits or your money back.
Full kits include:
full-size rolled-up, plans
complete hardware package features all contest-
grade components including:
o steel control horns
o quality bellcrank
o arrowshaft pushrod,
o adjustable leadout guide
o wing-tip weight boxes
o appropriate landing and tailwheel gear
o our famous "Lucky Boxes" for flaps and
elevators
Short kits include:
100% laser cut parts
set of plans
o The builder provides:
Hardware
Covering
sheet and stick balsa
landing gear
Newest Kits Blue Max Eternal
by Kaz Minato – Japanese World Team member
Page 6
DQ Master
by Kaz Minato – Japanese World Team member
Page 8
Ringmaster (take apart)
Old Time Stunt Legal
Page 21
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 3
RSM Full Built-Up Kits
Page Kit Name Engine Span Sq. In. Part #
5 ‘57 Nobler .35-.40 50.5 530 GBOX
5 Adams’ Special .25-.35 48.5 470 ADAM
5 Belfry Bound .46-.60 56-1/4 720 BELFULL
5 Big Job .59-.61 54 572 BIGJ
6 Blue Bird .25-.35 42 5/8 374 BBIRD
6 Blue Max Eternal .61-.76 60 679 BMAX
6 Buccaneer Mark II .35-.46 52 536 BUCK
6 Chipmunk .34-.40 51 532 DILLCHIP
7 Chizler .35-.40 51 540 CHIZ
7 Continental .46 55 572 CONTIN
7 Cougar .35-.40 54 559 COUG
7 Crusader .35-.45 53 570 CRUS
8 Derringer 46 .46-.60 56 670 DERR
8 DQ Master .46-.61 55.5 612 DQM
8 Dragon .35-.40 50 460 DRAG
8 Electra .35-.40 54 610 ELEC
9 F-4 .35-.40 50.5 525 F-4
9 Feno .25-.30 44 388 FENO
9 Fierce Arrow .40-.46 54 917 FARROW
9 Focke Wulf TA152 .46 56 597 TA152
10 Fury .40-.46 55.5 577 FURY
10 Gladiator .35-.46 58 / 67 660 / 735 GLAD
10 Grey Ghost .35-.40 54 527 GHOST
10 Hawker Hunter .46-.61 58 7/8 660 HAWK
11 Humbug .25-.40 58 500 HUMB
11 Humongous .35-.40 54 630 HUMG
11 Hurricane .35-.40 50 570 HURK
11 Jamison Special .35-.40 50 507 JAMI
12 L. A. Heat Two .35's 65 834 HEAT
12 L. A. Warmth Two .15’s 48.75 463 WARM
12 Madman .35-.40 49 411 MAD
12 ME-109 .35 52.5 557 ME109
13 Miss Kell .35-.40 54.5 557 KELL
13 Mosquito Two .35-.40’s 58 579 MOSS
13 Neptune II .35-.40 50 536 NEP
13 Oriental Plus – Full Kit .40 Tuned Pipe 56 605 OPLUS
13 Oriental Plus – Short Kit .40 Tuned Pipe 56 605 OPSHORT
14 P-40K Tiger .40-.46 56 560 P40K
14 P-51D Mustang .46-.60 56 610 P51D
14 Pathfinder LE .51 - .65 57 650 PATH
14 Pentastar .46-.61 58 / 61 654 / 693 PENT
15 Pole Dancer .40-.46 55 3/8 570 POLE
15 Ruffy .35-.40 50 545 RUFF
15 Shark 35 .35-.40 52 554 SHARK35
15 Shark 45 .45-.61 58 7/8 686 SHAR
16 Shoestring Stunter .46-.60 58 660 SHOE
16 Skylark .35-.60 SKY
16 Space Hound .35-.40 56 626 HOUND
16 Starduster 40 .40-.46 56.5 635 STAR
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 4
RSM Full Built-Up Kits
Page Kit Name Engine Span Sq. In. Part #
17 Stuka Stunter .25-.29 47.25 479 STUKA
17 Stunt King .25-.35 44 436 SKING
17 Super Ringmaster .25 - .35 42 381 SRING
17 Tempest .35-.40 54 610 TEMP
18 The Lark .35-.40 52 570 LARK
18 Thunder Gazer .61-.76 60.75 630 TG
18 Thunderbird II .35-.45 56 570 TBRD
18 Thundercloud .61-.76 60 665 CLOUD
19 Trivial Pursuit – Full Kit Piped .60 60 660 TRIV
19 Trivial Pursuit – Short Kit Piped .60 60 660 TRIVS
19 Tucker Special .35-.45 53 560 TUCK
19 Venus .35-.40 50 520 VNUS
19 Warburton Tony .35-.60 56 560 TONY
RSM Profile Kits
Page Kit Name Engine Span Sq. In. Part #
20 Mark 1 .35 42 462 MARK1
20 Miss Sarah .35 43 380 MISSS
20 Naughty Girl .40-.46 50.25 553 NGIRL
20 P40 Tiger .35 - .40 46 490 P40P
21 P51 -15 .15 36 291 P51-15
21 P51D Electric Electric 36 291 P15E
21 Ringmaster .25-.35 42 381 RING
21 Ringmaster (take apart)
RSM 1/2 A Kits
Page Kit Name Engine Span Sq. In. Part #
22 Hunter Stunter .049-.061 35 225 HUNT
22 MissAshlee .049 Reed Valve 24 125 MISSA
22 Pinto .049-.061 34 220 PINT
22 Sky Sport .049-.061 30 180 SKYS
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 5
RSM Full Built-Up Kits
‘57 Nobler
1957 “Green Box” Version
Classic Stunter
Engine: .35 - .40
Span: 50.5”
Area: 550 sq. in.
Length 38.5”
Laser Cut Ribs and Fuselage Formers
Winner 12 Nats, 2 Worlds
RSM Price $ 139.95
Part # GBOX
Adams’ Special
Old Time Legal 1950 Design
Engine: .25 - .35
Span: 48.5”
Area: 470 sq. in.
Length: 30.25”
100% Laser Cut
RSM Price $ 139.95
Part # ADAM
Belfrey Bound
Old Time Stunt Legal by Dale Kirn
Engine: .46 - .60
Span: 56.25”
Area: 720 sq. in.
Length: 35”
100% Laser Cut
RSM Price $189.95
Part # BELFULL
Big Job
OTS Legal By Addie Naccarato
Engine .59 - .61
Span: 54”
Area 572 sq. in.
Length 32.5”
100% Laser cut
RSM Price $ 179.95
Part # BIGJ
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 6
Blue Bird
Classic Legal by Charles A. Mackey
Engine: .25 - .35
Span: 42.6”
Area: 374 sq. in.
Length: 26.5”
100% Laser Cut
RSM Price $ 139.95
Part # BBIRD
Blue Max Eternal by Kaz Minato – Japanese World Team member
Engine: .61 - .76
Span: 60”
Area: 679 sq. in.
Length: 45”
Laser Cut
RSM Price $ 189.95
Part # BMAX
Buccaneer Mark II
By Allen Brickhaus
Engine: .35 - .46
Span: 52”
Area: 536 sq. in.
Length: 38”
100% Laser Cut
Accurate Rib Cutouts for Jig Construction
RSM Price $ 149.95
Part # BUCK
Chipmunk
Classic Legal by Joe Dill
Engine: .35 - .40
Span: 51”
Area: 532 sq. in.
Length: 38”
100% Laser Cut
RSM Price $ 149.95
Part # DILLCHIP
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 7
Chizler
Classic Legal by Dick Mathis
Engine: .35 - .40
Span: 51”
Area: 540 sq. in.
Length: 39-1/4”
100% Laser Cut
RSM Price $ 159.95
Part # CHIZ
Continental
Classic legal by Tom Warden
Engine .46
span 55”
Area 572 sq. in.
Length 39.5”
Includes a wing jig
100% laser cut
RSM Price $ 159.95
Part # CONTIN
Cougar
Classic Legal By KENHI
Engine .35 - .40
span 54 “
Area 559 sq. in
Length 36.5 “
100% Laser cut
RSM Price $ 149.95
Part # COUG
Crusader
Classic Legal Warbird by Charles A. Mackey
Engine: .35 - .45
Span: 53”
Area: 570 sq. in.
Length: 41.75”
Tricycle Landing Gear
Sleek Styling
RSM Price $ 144.95
Part # CRUS
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 8
Derringer 46
1st Place 1978 NATS & the Walker Cup
by Bob Whitely!
Engine: .46-.60
Span: 56”
Area: 670 sq. in.
Length: 43-1/2”
Full Canopy
Formed Landing Gear
RSM Price $ 179.95
Part # DERR
DQ Master
by Kaz Minato – Japanese World Team member
Engine: .46-.61
Span: 55.5”
Area: 612 sq. in.
Length: 41.8”
Laser Cut
RSM Price $ 144.95
Part # DQM
Dragon
Old Time Stunt Legal J.C. Yates
Engine .35-.40
Span: 50”
Area: 460 sq. in.
Length: 31”
Laser Cut Kit
1st in OTS – Ignition at the
Vintage Stunt Championships 2002!
RSM Price $ 139.95
Part # DRAG
Electra
Precision Stunter by Dick Williams
Top 10 1963 NATS!
Engine: .35 - .40
Span: 54”
Area: 610 sq. in.
Length: 38”
Classic Legal
RSM Price $ 144.95
Part # ELEC
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 9
F-4
By Bill Suarez
Engine: .35 - .40
Span: 50 1/2"
Area: 525 sq. in.
Rib Cut Outs for Jig
Laser Cut
Features 6 degree Anhedral Stab
RSM Price $ 169.95
Part # F-4
Feno
1955 Classic Design by Ted Goyet
Engine: .25 - .30
Span: 44”
Area: 388 sq. in.
Length: 29.5”
100% Laser Cut
RSM Price $ 139.95
Part # FENO
Fierce Arrow
Classic Legal 1957 Design
By Wild Bill Netzeband
Engine: .40 - .46
Span: 54”
Area: 917 sq. in.
Length: 32”
Weight: 44 oz.
100% Laser Cut
RSM Price $ 149.95
Part # FARROW
Focke Wulf TA152 By Keith Trostle
Engine .46
span 56 “
Area 597 sq. in.
Length 38.5”
Classic Legal
100% Laser cut
RSM Price $ 179.95
Part # TA152
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 10
Fury
By Lou Wolgast
Engine .40 - .46
span 55.5”
Area 577 sq. in.
Length 38”
Classic Legal
Laser cut
RSM Price $ 149.95
Part # FURY
Gladiator
Classic Legal by Dennis Shauer
Engine: .35 - .46
Two versions included in one kit
.35 Version
Span: 58”
Area: 660 sq. in.
Stab/Elevator: 25"
.46 Version
Span: 67"
Area: 735 sq. in.
Stab/Elevator: 29"
100% Laser Cut
Accurate Rib Cut Outs for Jig Construction
RSM Price $ 159.95
Part # GLAD
Grey Ghost
Larry Scarinzi’s Classic Stunter
Engine: .35 - .40
Span: 54”
Area: 527 sq. in.
Length: 31.5”
100% Laser Cut
Formed Wire Gear
Accurate Rib Cutouts for Jig Construction
RSM Price $ 149.95
Part # GHOST
Hawker Hunter
Bob Whitely’s 1969 Classic
Engine: .46 - .61
Span 58 7/8”
Area 660 Sq. In.
Length 47.5”
100% Laser Cut Parts
Accurate Rib Cut Outs for Jig Construction
RSM Price $ 189.95
Part # HAWK
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 11
Humbug
Classic Legal – By “Wild Bill” Netzeband
Engine: .25 - .40
Span: 58”
Area: 500 sq. in.
Length: 29.5”
Weight: 44 oz.
100% Laser Cut
RSM Price $ 139.95
Part # HUMB
Humongous
Old Time Stunt Legal by Ted Snow
Engine: .35 - .40
Span: 54”
Area: 630 sq. in.
Length: 32-3/4”
Designed by Ted Snow in Sept. 1949
RSM Price $ 139.95
Part # HUMG
Hurricane
Semi-Scale Warbird by Jack Sheeks
Engine: .40 - .46
Span: 50”
Area: 570 sq. in.
Length: 39-1/2”
Warbird favorite!
RSM Price $ 144.95
Part # HURK
Jamison Special
Old Time Stunt Legal by Bud Jamison
Flown at the 1947 NATS!
Engine: .35 - .40
Span: 50”
Area: 507 sq. in.
Length: 32”
1st, 2
nd & 3
rd in OTS at the 2000 NATS!
RSM Price $ 139.95
Part # JAMI
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 12
L.A. Heat
Twin Engine Stunt by Bob Whitely
Top 10 1987 NATS!
Engine: Two .35’s
Span: 65”
Area: 834 sq. in.
Length: 53”
Tricycle Landing Gear
RSM Price $ 199.95
Part # HEAT
L. A. Warmth
Pat King’s Twin Stunter
Inspired by Bob Whitely’s L.A. Heat
Engine: Two .15’s
Span: 48.75”
Area: 436 sq. in.
Length: 41.25”
100% Laser Cut
Accurate Rib Cutouts for Jig Construction
RSM Price $ 149.95
Part # WARM
Madman
Old Time Stunt by J.C. Yates
Engine: .35 - .40
Span: 49”
Area: 411 sq. in.
Length: 31.25”
100% Laser Cut
Accurate Rib Cutouts for Jig Construction
RSM Price $ 139.95
Part # MAD
ME-109
By Charles A. Mackey
Engine: .35
Span: 52.5”
Area: 557 sq. in.
Length: 34”
Classic Legal
Published September, 1958 in American Modeler
100% Laser Cut
RSM Price $139.95
Part # ME109
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 13
Miss Kell
By Bob Whitely
Engine: .35 - .40
Span: 54.5”
Area: 557 sq. in.
Length: 37”
100% Laser Cut
Accurate Rib Cutouts for Jig Construction
RSM Price $ 149.95
Part # KELL
Mosquito
Semi-Scale Twin by Jack Sheeks
Engine: Two .35 -.40’s
Span: 58”
Area: 579 sq. in.
Length: 37.75”
100% Laser Cut
RSM Price $199.95
Part # MOSS
Neptune II
By Jim Ebejer
Engine .35 - .40
Span 50”
Area 536 sq. in.
Length 35.75 “
Classic Legal “I BEAM”
Laser cut
RSM Price $ 169.95
Part # NEP
Oriental Plus
Dee Rice’s New Tuned Pipe Stunter
Engine: .40 Tuned Pipe
Span: 56”
Area: 605 sq. in.
100% Laser Cut
Accurate rib cut outs for jig construction
Classic “Oriental” styling
RSM Full Kit Price $189.95 - Part # OPLUS
RSM Short Kit Price $149.95
Part # OPSHORT
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 14
P-40K Tiger
Modern Stunter by Pat Johnston
RSM’s WARBIRD SERIES!
Engine: .40 - .46
Span: 53.25”
Area: 560 sq. in.
Length: 39.5”
RSM Price $ 159.95
Part # P40K
P-51D Mustang
SEMI-SCALE FULL STUNT!
Engine: .46 - .60
Span: 56”
Area: 610 sq. in.
Length: 39”
Designed by Pat Johnston & Eric Rule
Semi-Scale Precision Stunter
RSM Price $ 159.95
Part # P51D
Pathfinder LE
Precision Aerobatic Stunter
by Gordan Delaney
Engine: .51 - .65
Span: 57”
Area: 650 sq. in.
Length: 49”
100% Laser Cut
RSM Price $ 189.95
Part # PATH
Pentastar
By Lou Wolgast
Engine: .46 or .61
Two versions included in one kit
.46 version
Span: 58”
Area: 654 sq. in.
.61 version
Span: 61"
Area: 693 sq. in.
Carbon Fibre Bell Crank
Rib Cut Outs for Jig
Laser Cut Parts
RSM Price $ 189.95
Part # PENT
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 15
Pole Dancer
By John Ashford
Engine: .40 - .46
Span: 55 3/8"
Area: 570 sq. in.
Length: 43"
Rib Cut Outs for Jig
Laser Cut Parts
RSM Price $ 149.95
Part # POLE
Ruffy
Classic Stunt Legal by Lew McFarland
Engine .35 - .40
Span: 50”
Area: 545 sq. in.
Length: 34.25”
Laser Cut Kit
RSM Price $ 139.95
Part # RUFF
Shark 35
By Lew MacFarland
Engine .35 - .40
Span 52”
Area 554 sq. in.
Length 40 “
Classic Legal
Laser cut
RSM Price $ 144.95
Part # SHARK35
Shark 45
by Lew McFarland
AUTHENTICATED NATS CHAMP!
Engine: .45 - .61
Span: 58 7/8”
Area: 686 sq. in.
Length: 41.75”
Tricycle Gear
Classic Legal
RSM Price $ 169.95
Part # SHAR
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 16
Shoestring Stunter
Modern Stunter by Bob Whitely
Engine: .46 - .60
Span: 58”
Area: 660 sq. in.
Laser Cut Ribs and Fuselage Formers
RSM Price $ 199.95
Part # SHOE
Skylark
Competitive Precision Stunter
3 Versions in one kit!
Engine: .35 - .60
Builds as either “35”, “46” or “60” version
Classic Legal (46 & 35 versions)
46 version flown in 1958
35 version kitted in 1962
Span: (46 version) 56.5”
Area: (46 version) 614 sq. in.
Length: (all versions) 39.75”
Full-size plans signed by Ed Southwick
Laser Cut Ribs
RSM Price $ 179.95
Part # SKY
Space Hound
By Juri Sirotkin
Engine .35 - .40
Span 56 “
Area 626 sq. in.
Length 39.5”
Classic Legal
Laser cut
RSM Price $ 149.95
Part # HOUND
Starduster 40
By Ed Capitanelli
Engine .40 - .46
Span 56.5”
Area 635 sq. in.
Length 41”
Modern Stunt
RSM Price $ 159.95
Part # STAR
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 17
Stuka Stunter
Designed in 1951 by Don Still
Engines .25 - .29
Span 47.25”
Area 479 Sq. In.
Length 33.25”
100% Laser Cut Parts
Accurate Rib Cut Outs for Jig Construction
Old Time Legal
RSM Price $ 139.95
Part # STUKA
Stunt King
Published in 1950 by Bill Winter
Engine: .25 - .35
Span: 44”
Area: 436 sq. in.
Length: 29.5”
100% Laser Cut
RSM Price $134.95
Part # SKING
Super Ringmaster
Engine .25 - .35
Span 42”
Length 24.5”
Area 381 sq. in.
Classic Legal
Laser cut
RSM Price $ 134.95
Part # SRING
Tempest
Classic Legal Stunter by Bart Klapinski
1st Place 1967 NATS!
Engine: .35 - .40
Span: 54”
Area: 610 sq. in.
Length: 39”
Tricycle Landing Gear
Classic Legal
RSM Price $ 139.95
Part # TEMP
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 18
The Lark
Classic Legal by Charles A. Mackey
Authenticated CLASSIC LEGAL!
Engine: .35 - .40
Span: 52”
Area: 570 sq. in.
Length: 39.75”
Popular Kit!
RSM Price $ 144.95
Part # LARK
Thunder Gazer
By David Fitzgerald
Engine: .61 - .76
Span 60.75"
Area 630 Sq. In.
10.5" Nose Moment
18.5" Tail Moment
24.75" Stabilizer Span
4" Carbon Fibre Bell Crank
Laser Cut Parts
Rib Cut Outs for Jig Construction
RSM Price $ 224.95
Part # TG
Thunderbird II
Classic Legal 1959 Version Stunter by Bob Palmer
Engine: .35 - .45
Span: 56”
Area: 570 sq. in.
Length: 39”
Autographed Full-Size Plans
Aluminum Landing Gear
RSM Price $ 139.95
Part # TBRD
Thunder Cloud
By John Ashford
Engine: .61 - .76
Span: 60"
Area: 665 sq. in.
Length: 46.5"
Rib Cut Outs for Jig
Laser Cut Parts
RSM Price $ 189.95
Part # CLOUD
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 19
Trivial Pursuit
Precision Aerobatic Stunter
by Ted Fancher
Engine: Piped .60
Span: 60”
Area: 660 sq. in.
Length: 48”
100% Laser Cut
RSM Full Kit Price $199.95
Part # TRIV
RSM Short Kit Price $159.95
Part # TRIVS
Tucker Special
Classic Legal Precision Stunter
NATS CONTEST WINNER!
Engine: .35 - .45
Span: 53”
Area: 560 sq. in.
Length: 35”
Formed Landing Gear
RSM Price $ 144.95
Part # TUCK
Venus
OTS Legal by Jim Ebejer
Engine: .35 - .40
Span: 50”
Area: 520 sq. in.
Length: 38.8”
100% Laser Cut
OTS Legal
RSM Price $ 149.95
Part # VNUS
Warburton Tony
Classic Legal Warbird Stunter
Engine: .35 - .60
Span: 56”
Area: 560 sq. in.
Length: 37”
Classic Legal as seen in the 3/63 American Modeler
mag
1ST
PLACE ‘63 BRITISH NATS!
RSM Price $ 139.95
Part # TONY
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 20
RSM Profile Kits
Mark 1
Profile Stunter for Beginners by Eric Rule
Engine: .35
Span: 42”
Area: 462 sq. in.
Profile Fuselage
Adjustable Tank Mount
RSM Price $ 89.95
Part # MARK1
Miss Sarah
Profile Sport/Stunt - “COSMIC WIND”
Engine: .19 - .35
Span: 43”
Area: 380 sq. in.
Profile Fuselage
Quick to build!
Classic Legal
RSM Price $ 79.95
Part # MISSS
Naughty Girl
By John Ashford
Engine: .40 - .46
Span: 50.25"
Area: 553 sq. in.
Length: 42 7/8"
Rib Cut Outs for Jig
Laser Cut Parts
RSM Price $ 119.95
Part # NGIRL
P-40 Tiger
Competitive Profile Stunter
RSM’s WARBIRD SERIES!
Engine: .35 - .40
Span: 46”
Area: 490 sq. in.
Length: 36”
1/2” Profile Fuselage
Formed Landing Gear
Ply Doublers
RSM Price $ 99.95
Part # P40P
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 21
P-51 Mustang
Ron Burn’s Profile Mustang
Engines .15 - .20
Span 36”
Area 291 Sq. In.
Length 25.75”
100% Laser Cut Parts
Accurate Rib Cut Outs for Jig Construction
RSM Price $79.95
Part # P51-15
Electric P-51D Mustang
Electric Flight Without the
High Price or Problems
Engine: electric
Span 36"
Area 291 Sq. In.
Length 25-3/4"
100% Laser Cut Parts
Accurate Rib Cut Outs for Jig Construction
Package includes kit + motor, speed controller,
Timer/sequencer, battery & prop. All programming is
complete. Just "plug & play"
RSM Price $179.95
Part # P51E
Ringmaster
Old Time Stunt Legal
Engine .19 - .35
Span: 42”
Area: 381 sq. in.
Length: 24.25”
Laser Cut Kit
RSM Price $ 79.95
Part # RING
Ringmaster (take apart)
Old Time Stunt Legal
Engine .19 - .35
Span: 42”
Area: 381 sq. in.
Length: 24.25”
Laser Cut Kit
RSM Price $ 89.95
Part # TARING
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 22
RSM 1/2 A C/L Kits
Hunter Stunter
Precision 1/2A Stunter Designed by Eric Rule
Engine: .049 - .061
Span 35”
Area: 225 sq. in.
Length 21”
Formed Landing Gear
100% Laser Cut
Flies the complete stunt pattern
RSM Price $ 74.95
Part # HUNT
Miss Ashlee
Sport and Stunt for 1/2 A Power
.049-.051 FUN!
Engine: .049 Reed Valve
Span: 24”
Area: 125 sq. in.
Length: 16-3/4”
Fun Flyer!
RSM Price $ 44.95
Part # MISSA
Pinto
Large Precision Stunter for 1/2A Power
by Dee Rice
FLYS COMPLETE PATTERN
Engine: .049 - .061
Span: 34”
Area: 220 sq. in.
Length: 21”
Formed Landing Gear
Laser Cut Kit
RSM Price $ 74.95
Part # PINT
Sky Sport
By Larry Renger
Engine .049 - .061
Span 30”
Area 180 sq. in.
Length 21”
Modern Stunt Profile
Balloon Tank included
1” Main Wheels included
Tail Wheel Skid included
Laser cut
RSM Price $ 79.95
Part # SKYS
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 23
RSM Combo Deals with Engine and Plane Kit
Mark 1 Profile
Mark 1 Profile with Stock Fox 35,
Includes Tank, Wheels, glue, Handle,
Lines, Clips
Regular price: 273.58
Combo price: 219.95
Part # COM1
Electric P-51D Mustang
Electric Flight Without the
High Price or Problems
Package includes kit + motor, speed controller,
Timer/sequencer, battery & prop. All programming is
complete. Just "plug & play"
RSM Price $179.95
Part # P51E
Ringmaster (take apart)
With electric power package
The venerable RINGMASTER can be taken apart for
easy transportation. Electric Powered, it can be
carried on a commercial aircraft.
The only “Flip the switch and fly” system on the
market. Power package which includes prop, motor,
speed controller, KR Governor & Battery is fully
bench tested and comes ready to install.
RSM Price $249.99
Part # TARINGPKG
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 24
Electric Control Line
General Description Electric Control Line (ECL) is simply a new and different way to power our models. Years ago when modelers
switched from ignition to glow engines they did so because glow engines offered significant advantages.
Electric motors now offer similar advantages to the modern modeler.
Benefits Anyone who has flown precision aerobatics knows that a consistent engine run is essential to top performance.
When your engine fails to give you a perfect run you find yourself wasting valuable practice time. When this
happens at a contest you are forced to take an “attempt” or you end up with a terrible score.
The major advantage of electric power is that your motor run is exactly the same flight after flight. No more
wasted flights due to a bad engine run equals more quality practice time! No more bad scores due to poor needle
settings! No more need to change the needle setting between your first and second flight!
A couple of additional benefits to electric control line are:
1) The C/G does not change during the flight as there is no fuel being drawn out of the nose of the model.
2) No hot exhaust so no requirement to fuel proof the model makes for a lighter model (improved
horsepower to weight ratio).
3) No need to wipe down the model after each flight so no more worry about fuel soaking.
4) The engine sound is all but eliminated which allows you to fly in areas you could never do so in the past.
This opens up all kinds of parks for our use.
Electric powered models have been used successfully in stunt at both the national and international level. This
quiet revolution has all but taken over in R/C pattern at the top level. Prices of batteries, motors, and ESC’s
(Electronic Speed Controllers) are now at the level where it costs around the same as flying glow engines. The
battery technology has already been improved to allow for over 200 good flights from around the 50 or 60 of a
few years ago. It is now cheaper to fly electric than glow.
For more information on Electric Control Line please visit our website at
www.rsmdistribution.com
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 25
Competition Level Brushless Motors
Description Part # Price
Hacker A30-10XL
Compare to .46 glow power.
Includes backmount, prop adapter and all screws.
3.5mm gold bullet connectors are provided
Peak Watts: 700
kV(RPM/V):900
Weight:6.30 oz
Shaft Diameter: 5.00mm
Operating Current: 30A
Peak Current:42A
A30 79.99
Hacker A30-8 XL Motor.
Compare to .35-.40 Glow Power.
Includes backmount, prop adapter and all screws.
3.5mm gold bullet connectors are provided
Peak Watts: 700
kV(RPM/V):1100
Weight:6.30 oz
Shaft Diameter: 5.00mm
Operating Current: 35A
Peak Current:45A
A30-8XL 79.99
A20-26M Hacker Motor.
Compare to .061 Glow Power.
Included are 2 prop adapters, plywood and aluminum motor mounts,
screws and 2 spare shafts. The motor uses a standard 3mm output
shaft.
Peak Watts: 150
kV(RPM/V):1130
Weight:1.48 oz
Operating Current: 12A
Peak Current:15A
A20-26M 47.99
Hacker A20-12XL
Compare to .15 Glow Power.
Includes mounting hardware and 2 spare shafts.
Please note - A20-XL Motors do not include backmount parts
Peak Watts: 300
kV(RPM/V):1000
Weight:2.95 oz
Shaft Diameter: 3.17mm
Operating Current: 20A
Peak Current:35A
HACKER
A20-1 57.99
Hacker A30-12M V2
Compare to .25 Glow Power
Includes backmount, prop adapter and all screws.
3.5mm gold bullet connectors are provided.
Peak Watts: 400
kV(RPM/V):1370
Weight:4.00 oz
Shaft Diameter: 5.00mm
Operating Current: 25A
Peak Current:35A
HACKER
A30-1 59.99
Hacker A50-12S
Compare to .61-.74 Glow Power.
Peak Watts: 1700
kV(RPM/V):492
Weight:12.32 oz
Shaft Diameter: 6.00mm
Operating Current: 45A
Peak Current:70A
HACKER
A50-1 129.99
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 26
Sport Level Brushless Motor
Description Part # Price
L2210 Brushless Motor - 1230 KV.
Compare to .061 Glow Power.
Bell style motor.
Kv: 1230 rpm/v
Voltage:7.4~11.1v (2~3s)
Max Current: 14A
Max Power: 150W
Shaft Size : 3mm
Weight: 50g
L2210-1230 29.99
KDA 22-20L Brushless Motor - 1050 KV.
Compare to .15 Glow Power.
Kv (rpm/v) 1050
Weight (g) 85
Max Current (A) 25
Power(W) 250
KDA A22-20L 39.99
KDA A36-12M Brushless Motor - 1370 KV.
Compare to .25 Glow Power.
Kv (rpm/v) 1370
Weight (g) 116
Max Current (A) 35
Power(W) 380
A36-12M 49.99
KDA A36-8XL Brushless Motor - 1000 KV.
Compare to .35-.40 Glow Power.
Kv (rpm/v) 1000
Weight (g) 190
Max Current (A) 45
Power(W) 550
KDA A36-8XL 59.99
KDA A36-10XL Brushless Motor - 900 KV.
Compare to .46 Glow Power.
Kv (rpm/v) 900
Weight (g) 190
Max Current (A) 42
Power(W) 785
KAD A36-10XL 59.99
KDA K50-12S Brushless Motor.
Compare to .61-.74 Glow Power.
Kv (rpm/v) 620
Weight (g) 285
Max Current (A) 55
KDA A50-12S 89.99
Speed Controllers Description Part # Price
50 Amp Hacker X55 Pro Speed Controller
With Heli Governor Mode ESP 89.99
70 Amp Hacker X70 Pro Speed Controller
With Heli Governor Mode X70SB 95.99
20 Amp ESC with BEC. Comes with all connectors soldered on. Perfect
for use with KR Governor for C/L flight.
Weight: 18g
Size: 28x2x8mm
Constant Current: 20A
Max. Current: 30A (for 10 seconds)
Input: 2-4s Li-Po ; 5-12s Ni-XX
BEC: Max. 2A@5V
20A ESC 19.99
ESC by ZTW 30 AMP with BEC. Comes with all connectors soldered
on. Use with KR Governor for C/L flight.
Weight: 28g with cable
Size: 40x28x8mm
Constant Current: 30A
Max. Current: 40A (for 10 seconds)
Input: 2-4s Li-Po ; 5-12s Ni-XX
BEC: Max. 3A@5V
30A ESC 39.99
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 27
Speed Controllers Description Part # Price
ESC 50 Amp by ZTW with SBEC. Comes with all connectors soldered
on. Use with KR Governor for C/L flight.
Weight: 45g with cable
Size: 58x31x11mm
Constant Current: 50A
Max. Current: 70A (for 10 seconds)
Input: 2-6s Li-Po ; 5-18s Ni-XX
BEC: Max. [email protected] Switching DC-DC
50A ESC 49.99
70 Amp ESC by ZTW with BEC
For use with the KR Governor Timer ZTW70 69.99
Batteries Description Part # Price
Battery 3300 mAh 4 cell 14.8 Volt by Thunder Power complete with balancer plug and Deans
Connector TP3300 99.99
Battery 3300 MaH LiPo 4 Cell 14.8V 25C by Longre Power with Deans Connector and Balance
Plug. Perfect for the RSM .46 System. LP3300-4S 69.99
Battery 3300 MaH 3 Cell 25C LiPo by Longre Power complete with Deans Connector and
Balance Plug. Perfect for the RSM 35-40 System. LP3300-3S 49.99
Battery 2200 mAh 3 cell 11.1 volt 25C LiPo by Longre Power complete with balancer plug and
Deans Connector. Perfect for the RSM 15 System. LP2200 29.99
Battery 3 Cell 1300 mAh 30C. Weight 3.75 oz. Perfect for RSM .061 System AM13003S 24.99
Propellers For Electrics Description Part # Price
APC 9X6 Electric Prop Standard Pitch APC9E 3.50
APC 9X6 Electric Prop Reverse Pitch (Pusher) APC9X6 3.50
APC 10X7 Electric Prop Perfect for the RSM 35-40 System APC10X7E 3.95 APC 12-6 Electric Prop Reverse Pitch APC12EP 5.95
APC style 11 x 5.5 Electric Prop Pusher - Reverse Pitch -Perfect for the
RSM .35-.40 Electric System APC1155 4.75
APC Style 14 x 7 Electric Pusher Prop Reverse Pitch - Perfect for RSM
.65-74 System APC1470EP 11.99
APC Style 7X5 Electric Pusher Prop Reverse Pitch - Perfect for the
RSM .061 Electric Power System APC7X5EP 3.50
APC Style 8X4 Electric Pusher Prop Reverse Pitch APC84EP 3.54
APC Style 12 X 5.5 Wide Electric Pusher Prop Reverse Pitch - Perfect
for RSM .46 Electric System ASPC1255WEP 6.99
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 28
Timer/Sequencers Description Part # Price
KR Governor ver.1.2. Controls RPM, Flight Time and Start delay.
Allows use of lower priced ESC to reduce cost. Gives flight
performance similar to high priced tuned pipe system. Instant stop in
event of prop jam protects your system from burn out. For use with
Version 1.0 Program Stick.
KR1 35.00
KR Governor ver.2, with Horizontal Pins & On/Off Switch. Controls
RPM, Flight Time and Start delay. Allows use of lower priced ESC to
reduce cost. Gives flight performance similar to high priced tuned pipe
system. Instant stop in event of prop jam protects your system from
burn out.
Most customers use this configuration for built-up fuselages.
KR GOV-H 42.50
KR Governor ver.2, with Vertical Pins & On/Off Switch. Controls
RPM, Flight Time and Start delay. Allows use of lower priced ESC to
reduce cost. Gives flight performance similar to high priced tuned pipe
system. Instant stop in event of prop jam protects your system from
burn out.
Most customers use this configuration for profile fuselages.
KR GOV-V 42.50
KR governor ver .2 with Retracts. The governor will allow you to equip
your model with retractable landing gear. Computer chip controls entire
flight plus the retracts. You will require a switch with this product.
Please add KR Switch.
KR GOV-R 39.99
KR Governor Activator Switch. For use in turning the ECL system on
and off. KRSWITCH 5.00
KR Governor Programmer Unit. For use with the KR Governor Ver.1
or Ver.1.2. Set Flight Time, RPM, Start Delay Time plus Power
Increase during Maneuvers. Simple to use at the flying field. KRPROG 15.00
KR Governor Program Stick Ver.2. Sets Flight Time, RPM, Start Delay
and Power Increase. For use with the KR Governor ver.2. Complete
with easy to read instruction manual. Simple to use at home or at the
flying field.
KRPROG2 15.00
KR Governor Ver .2 with Switch & Programmer KRPKG 49.50 HUBIN FM8-A (RSM) Simple RPM and Time adjustments
Pre Set for 9100 RPM, Soft Start Flight timed for 6 min 20 sec
Soft Stop Push Button extends through fuselage TMR1 30.00
KR Governor Activator Switch. For use in turning the ECL system on
and off. Great for Profile Models KRBUTTON 5.00
KR Governor designed for use with Profile Models. Pins are curved to
take up less space. Start Button instead of a Switch KRGOV-P 47.50
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 29
ESC Program Cards Description Part # Price
ESC Program Card for KDA (Saker) ESC.
Although our ESC's are fully programmed for C/L flight when we ship
them you may wish to change the settings.
This programming card works with all of the models of KDA (Saker)
Speed Controllers that we carry.
It provides a quick easy way to set all of the speed controller
programming options at the same time.
To use this programming card you simply set the jumper pins to the
desired ESC parameter values and then plug the card into the control
lead on your ESC and attach a motor to the output leads of the speed
controller. When you power up the controller with the motor battery,
the ESC will download and store the new values into it's internal
memory. After you hear one short beep from the motor, the program is
loaded and you can unplug the motor battery from the speed controller.
Now you can remove the program card and plug the control lead back
into the KR Governor
KDACARD 9.99
ESC Program Card for ZTW ESC.
Although our ESC's are fully programmed for C/L flight when we ship
them you may wish to change the settings.
This programming card works with all of the models of ZTW Speed
Controllers that we carry.
It provides a quick easy way to set all of the speed controller
programming options at the same time.
To use this programming card you simply set the jumper pins to the
desired ESC parameter values and then plug the card into the control
lead on your ESC and attach a motor to the output leads of the speed
controller. When you power up the controller with the motor battery,
the ESC will download and store the new values into it's internal
memory. After you hear one short beep from the motor, the program is
loaded and you can unplug the motor battery from the speed controller.
Now you can remove the program card and plug the control lead back
into the KR Governor.
ZTWCARD 9.99
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 30
Battery Chargers/Misc. Description Part # Price
Thunder Power TP6-10C
Input Power: 11-16V DC 10Amp at maximum charge rate
Memory for each Battery type
Charge battery type: LiPoly/NiMH/NiCd/Pb/A123 Charge voltage and cells:
LiPoly battery: 1 - 6 cells CC to CV change voltage: 4.1 V/cell
Full Charge Voltage 4.2 V/Cell
NiMh, NiCd Battery: 1 - 14 cells, Pb(SLA) battery: 6V/12V/24V ,A123
Battery: 1 - 6 cells
TP610C 119.95
Imax B6 AC Dual Power Charger
AC 100~240v or 12V DC input
Microprocessor controlled
Individual cell balancing
Charges Li-ion, LiPo, LiFe, Ni-Cd, NiMH, and PB batteries
Input voltage monitoring. (Protects car batteries at the field)
Data storage (Store up to 5 packs in memory)
Battery break in and cycling
Ni-MH/NiCd cells: 1~15
Li-ion/Poly cells: 1~6
Pb battery voltage: 2~20v
IMB6AC 74.99
Hacker USB Interface programmer for Windows LINK 14.99
Deans Connector Male (2) WSD1302 3.59
Deans Connector Female (2) WSD1303 2.69
Safe Charging Bag for your Lipo Battery
Protect your family and home from the hazard of lipo charging.
This lipo-guard is a fireproof bag, designed to stop and contain the fire caused
by incorrectly or poorly functioning lipos, especially during charging.
We urge all customers to always practice extreme caution when charging and
never leave a charging battery unattended.
This pack is the small size. It is 18x22cm. It will fit three 2200mah 3S1P packs
comfortably.
The LP-Guard is made from a fibreglass woven fabric. Similar to fireproof suits
worn by some firefighters
CHGBAG 7.99
Battery Checker
Battery Capacity Controllor. LED readout of capacity in Li-Po battery at a
glance. Also checks balance of each cell. Small and compact it fits in your field
box.
BATTCHECK 24.95
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 31
Electric Control Line Systems
Complete systems from RSM Distribution are flight tested. They come with all connectors installed. Flight parameters are
fully programmed. Just mount, flip the switch and fly. No set up or computer is required to operate.
Competition Level
Description Part # Price
RSM 061 Electric Power System
Equal to .061 Glow Power. Hacker A20-34S motor, 12 AMP ESC, KR Governor, 910 mAh 3S 25C Battery & 6x5.5
prop. Comes with all programming installed.
RSM061SYSC 169.99
RSM 15 Electric Power System
Equal to .15 Glow Power. Hacker A20-12XL motor, 30 AMP ESC, KR Governor, 2200 mAh 3S 25C Battery & 9x6
Pusher prop. Comes with all programming installed.
RSM15SYSC 220.99
RSM 25 Electric Power System
Equal to .25 Glow Power. Hacker A30-12M motor, 50 AMP ESC, KR Governor, 3300 mAh 3S 25C Battery & 10x7
prop. Comes with all programming installed.
RSM25SYSC 224.99
RSM 35 Electric Power System
Equal to .35 - .40 Glow Power Hacker A30-8XL motor, 50 AMP ESC, KR Governor, 3300 mAh 3S 25C Battery & 11x5.5
Pusher prop. Comes with all programming installed.
RSM35SYSC 274.99
RSM 46 Electric Power System
Equal to .46 Glow Power Hacker A30-10XL motor, 70 AMP ESC, KR Governor, 3300 mAh 4S 25C Battery & 12x6
Pusher prop. Comes with all programming installed.
RSM46SYSC 329.99
RSM 61-74 Electric Power System
Equal to .61 - .74 Glow Power Hacker A50-12S motor, 70 AMP ESC, KR Governor, 3900 mAh 6S 25C Battery & 14x7
prop. Comes with all programming installed.
RSM6174SYSC 424.99
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 32
Sport Level Description Part # Price
RSM 061 Electric Power System
Equal to .061 Glow Power. Includes KDA A20-26M Motor, 20 Amp Speed Controller, KR Timer/Sequencer, 1300 mAh 3
cell Battery & 8 x 5 Prop. Comes with all programming installed.
RSM061SYS 139.99
RSM 15 Electric Power System
Equal to .15 Glow Power. Includes KDA A22-20L Motor, 30 Amp Speed Controller, KR Timer/Sequencer, 2200 mAh 3
cell Battery & 9 x 6 PusherProp. Comes with all programming installed.
RSM15SYS 139.99
RSM 25 Electric Power System
Equal to .25 Glow Power. KDA A30-12M Motor, 40 AMP ESC, KR Governor, 3300 MaH 3 cell Lipo Battery, 10 x 7
Pusher Prop. Fully Programmed Ready to Fly
RSM25SYS 184.99
RSM 35 Electric Power System
Equal to .35 - .40 Glow Power KDA A30-8XL Motor, 45 AMP ESC, KR Governor, 3300 MaH 3 cell Lipo Battery, 11 x 5.5
Pusher Prop. Fully Programmed Ready to Fly
RSM35SYS 186.99
RSM 46 Electric Power System
Equal to .46 Glow Power Includes KDA A30-10XL Motor, 45 Amp Speed Controller, Timer/Sequencer, 3300 mAh 4
cell 25C Battery & Prop. Comes with all programming installed.
RSM46SYS 244.99
RSM 61-74 Electric Power System
Equal to .61 - .74 Glow Power Includes KDA-K5012S-620 Motor, 70 Amp Speed Controller, Timer/Sequencer, 4000 mAh 6
cell 35C Battery & 14x7 Prop. Comes with all programming installed.
RSM6174SYS 314.99
Electric Packages Description Part # Price
Electric Powered P51-D Profile. Profile Aerobatic Stunter powered by RSM 15
Electric System.
Equal to .15 glow power.
Package includes Kit, Electric Motor, Speed
Controller, KR Governor, Switch & Battery.
All programming necessary to fly the
complete AMA Stunt Pattern. Fully field
tested by stunt flyers.
P15E 179.95
The venerable RINGMASTER can be taken
apart for easy transportation. Electric
Powered, it can be carried on a commercial
aircraft.
The only “Flip the switch and fly” system on
the market. Power package which includes
prop, motor, speed controller, KR Governor &
Battery is fully bench tested and comes ready
to install.
TARINGPKG 249.99
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 33
Building Supplies
Plans for RSM Kits All RSM plans are printed on white bond paper using a plotter.
They come rolled in a shipping tube.
Profile Stunters Name Description Pages Price Part #
Mark 1 Beginner Trainer for .35 by Eric Rule 1 15.00 M1PLN
Miss Ashlee 1/2A Profile for Cox Baby Bee 1 10.00 MAPLN
Miss Sarah “Cosmic Wind” Profile for .35 1 15.00 MSPLN
OTS Ringmaster Ringmaster by M. Kania 1 15.00 RGPLN
P40 Warhawk Precision Profile for .35 by Eric Rule 1 15.00 P40PLN
P51-15 Profile Stunter for .15 by Ron Burn 1 15.00 P15PLN
Old Time Legal Name Description Pages Price Part #
Adams’ Special 1950 Stunter by Frank Adams 1 15.00 ADPLN
Belfrey Bound Dale Kirn’s “Bat like” Stunter 1 15.00 BBPLN
Big Job Adie Naccarato’a Big Job 1 15.00 BJOBPLN
Dragon J.C. “Madman” Yates’ design 1 15.00 DGPLN
Humongeous 1949 design by Ted Snow 1 15.00 HUPLN
Jamison Nats Winner by Bud Jamison 1 15.00 JMPLN
Madman J.C. “Madman” Yates design 1 15.00 MADPLN
OTS Ringmaster Matt Kania’s Profile 1 15.00 RGPLN
Stuka Don Still’s design 1 15..00 STPLN
Stunt King Stunt King 1 15.00 SKINGPLN
Venus Venus by Jim Ebejar 1 15.00 VNPLN
Classic Legal Stunters Name Description Pages Price Part #
Blue Bird Charlie Mackey’s First Published Design 1 15.00 BBDPLN
Chipmunk By Joe Dill 1 15.00 CHIPPLN
Continental Continental by Tom Warden 1 15.00 CONTPLN
Cougar Cougar Stunter 1 15.00 COUGPLN
Crusader Twin Boom for .35 by Charles Mackey 1 15.00 CRPLN
Electra Nats Winner by Dick Williams for .35 1 15.00 ELPLN
Feno 1959 design by Ted Goyet for .25 1 15.00 FNPLN
Fierce Arrow “Wild Bill” Netzeband’s Delta Wing 1 15.00 FAPLN
Fury Fury by Lew Wolgast 1 15.00 FURYPLN
Gladiator By Dennis Shauer 1 15.00 GLADPLN
Grey Ghost Grey Ghost by Larry Scarinzi 1 15.00 GHSTPLN
Hawker Hunter 1969 Classic by Bob Whitely 1 20.00 HAWPLN
Humbug Classic Stunter by “Wild Bill” 1 15.00 HUMPLN
Lark Classic Legal for .35 by Charles Mackey 1 15.00 LKPLN
ME 109 ME 109 by Charles Mackey 1 15.00 ME109PLN
Miss Sarah “Cosmic Wind” Profile for .35 1 15.00 NEPPLAN
Neptune II Classic “I-beam” by Jim Ebejer 1 15.00 MSPLN
Nobler 1957 “Green Box” Nobler Classic Legal 1 15.00 NOPLN
Pinto 1/2A Precision by Dee Rice 1 10.00 PIPLN
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 34
Classic Legal Stunters Name Description Pages Price Part #
Ruffy Lew MacFarland’s Nats Winner for .35 1 15.00 RUPLN
Shark 35 by Lew MacFarland 1 15.00 SHR35PLAN
Shark 45 Nats Winner by Lew MacFarland for .46 or
.60
1 15.00 SKPLN
Skylark Ed Southwick’s Classic Winner for .35 or
.46
1 15.00 SYPLN
Space Hound Space Hound 1 15.00 HNDPLN
Super Ringmaster Super Ringmaster 1 15.00 SRNGPLN
T Bird II Bob Palmer’s 1959 Nats Winner for .35 1 15.00 TBPLN
Tempest Nats Winner by Bart Klapinski for .35 1 15.00 TMPLN
Tony 1963 British Nats Winner by Frank
Warburton
1 15.00 TYPLN
Tucker Special Nats Winner by Bob Tucker for .35 1 15.00 TKPLN
Modern Stunters Name Description Pages Price Part #
Buccaneer II Buccaneer Mark II by Allen Brickhaus 1 15.00 BUCPLN
Derringer 46 Nats Winner by Bob Whitely for .46 1 15.00 DRPLN
Hunter Stunter 1/2A Precision Stunter by Eric Rule 1 10.00 HTPLN
Hurricane Semi Scale for .35 by Jack Sheeks 1 15.00 HKPLN
L.A. Heat Twin Engine by Bob Whitely 1 20.00 LAPLN
L.A. Warmth Twin .15 inspired by Bob Whitely’s L.A.
Heat
1 20.00 WARMPLN
Miss Kell Miss Kell by Bob Whitely 1 15.00 KELLPLN
Mosquito Twin Engine by Jack Sheeks 1 20.00 MOSSIEPLAN
Oriental Plus by Dee Rice for .40 Tuned Pipe 1 15.00 OPPLN
P40K Precision Stunter for .40 by Pat Johnston 1 15.00 P4KPLN
P51D Precision Stunter for .46 by Eric Rule 1 15.00 P51PLN
Pentastar 46 Lou Wolgast's 46 sized Pentastar 1 15.00 PENPLN
Pentastar 61 Lou Wolgast's 61 sized Pentastar 1 20.00 PENPLN60
Shoestring 2000 Bob Whitely’s 2000 Nats Model .50 tuned
pipe
1 20.00 SHPLN
Starduster Starduster by Ed Capitanelli 1 15.00 STARPLN
Thunder Gazer David Fitzgerald's World Champion 1 20.00 TGPLN
All laser cut part outlines 1 20.00 TGPARTS
Assembly drawings including pictures of
take apart assemblies
1 20.00 TGDWG
Set of all three drawings 1 45.00 TGSET
Trivial Pursuit Ted Fancher’s Special Edition .60 tuned
pipe
1 20.00 TPPLN
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 35
Laser Cut Rib Sets from Hobby Fastener Kits Description Part # Price
“Adams’ Special” Rib Set ADMRIB 29.99
“Belfry Bound” Rib Set BELRIB 39.99
“Big Job” Rib Set BJOBRIB 29.99
“Blue Bird” Rib Set BBRDRIB 29.99
“Buccaneer” Rib Set BUCRIB 39.95
“Chipmunk Rib Set CHIPRIB 34.95
“Continental” Rib Set CONTRIB 39.95
“Cougar” Rib Set COUGRIB 39.95
“Derringer 46” Rib Set DERRIB 29.99
“Dragon” Rib Set DRAGRIB 29.95
“Electra” Rib Set ELECRIB 29.99
“Feno” Rib Set FNRIB 29.99
“Fierce Arrow” Rib Set FARIB 29.99
“Fury” Ribs FURYRIB 39.95
“Gladiator” Rib Set GLADRIB 34.95
“Green Box Nobler” Rib Set NOBRIB 29.99
“Grey Ghost” Rib Set GHSTRIB 39.95
“Hawker Hunter” Rib Set HAWKRIB 39.99
“Humbug” Rib Set HBUGRIB 29.99
“Humongous” Rib Set HUMRIB 29.99
“Hunter Stunter” Rib Set HTRRIB 19.99
“Jamison Special” Rib Set JAMRIB 29.99
“L.A. Heat” Rib Set LARIB 39.99
“L.A. Warmth” Ribs WARMRIB 39.95
“Mackey Crusader” Rib Set CRURIB 29.99
“Mackey Lark” Rib Set LARKRIB 29.99
“Madman” Rib Set MADRIB 29.99
“Mark 1” Rib Set MARKRIB 29.99
“ME 109” Ribs MERIB 39.95
“Miss Ashlee” Rib Set ASHRIB 19.99
“Miss Kell” Ribs KELLRIB 39.95
Description Part # Price
“Miss Sarah” Rib Set SARRIB 29.99
“Mosquito” Rib Set MOSSIERIB 29.99
“Neptune II” Rib Jig NEPJIG 5.99
“Oriental Plus” Rib Set OPLUSRIB 39.99
“Oriental” Rib Set ORRIB 29.99
“OTS Ringmaster” Rib Set RINRIB 29.99
“P40” Profile Rib Set P40RIB 29.99
“P40K Tiger” Rib Set P40KRIB 29.99
“P51-15” Rib Set P15RIB 29.99
“P51D Mustang” Rib Set P51DRIB 29.99
“Pathfinder LE” Rib Set PATHRIB 34.99
“Pentastar” Rib Set PENRIB 34.99
“Pinto” Rib Set PINRIB 19.99
“Ruffy” Rib Set RUFRIB 34.99
“Shark 35” Rib Set SHAR35RIB 29.99
“Shark 45” Rib Set SHARRIB 34.99
“Sheeks Hurricane” Rib Set HURKRIB 29.99
“Skysport” Rib Set SKYRIB 34.99
“Starduster 40” Ribs STARRIB 39.95
“Stills Stuka” Rib Set STURIB 29.99
“Ta-152” Rib Set TARIB 34.99
“Tempest” Rib Set TEMRIB 29.99
“Thunderbird II” Rib Set TBRIB 29.99
“Trivial Pursuit” Rib Set TPRIB 39.99
“Tucker Special” Rib Set TUCKRIB 29.99
“Venus” Rib Set VENRIB 29.99
“Warburton Tony” Rib Set TONYRIB 29.99
“Yates Dragon” Rib Set DRARIB 34.99
Southwick “Skylark” Rib Set SKYRIB 34.99
Whitely “Shoestring” Rib Set SHOERIB 39.99
Wheel Pants and Strut Covers Description Part # Price
“Crusader” Trike Wheel Pants WPCRUS 21.99
“Derringer 46” Strut Covers WPDER 7.99
“Electra” Strut Covers WPELEC 7.99
“Hurricane” Strut Covers WPHURK 7.99
“L.A. Heat” Strut Covers WPHEAT 7.99
“Lark” Wheel Pants WPLARK 14.99
“Nobler” Strut Covers WPNOB 7.99
“P40K” Strut Covers WPP40K 7.99
Description Part # Price
“P51D Mustang” Strut Covers WPP51D 7.99
“Pinto” Wheel Pants WPPINTO 12.99
“Shark 45” Strut Covers WPSHAR 7.99
“Shoestring” Wheel Pants WPSHOE 14.99
“Tempest” Strut Covers WPTEMP 7.99
“Tucker Special” Wheel Pants WPTUCK 14.99
“Warburton Tony” Strut Covers WPTONY 7.99
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 36
Wheels
Dave Brown Wheels If you are putting the wheels into wheel pants the Lectra-Lite are a perfect choice!
Lectra-Lite wheels are approximately 2/3 the thickness of the regular Lite-Flite wheels.
Lite-Flite Wheels Description Part # Price
1-1/2” Treaded DB5715 4.50
1-3/4” Treaded DB5717 5.25
2” Treaded DB5720 5.50
2-1/4” Treaded DB5722 5.75
2-1/2” Treaded DB5725 6.25
2-3/4” Treaded DB5727 6.75
3” Treaded DB5730 7.25
Lectra-Lite Wheels Description Part # Price
1-3/4” Narrow Treaded DB5817 5.25
2” Narrow Treaded DB5820 5.50
2-1/4” Narrow Treaded DB5822 5.75
Tailwheels Description Part # Price
3/4” Plastic Tailwheel SH451 1.75
3/4” Aluminum Hub Rubber
Tread
DU75TW 2.25
1” Aluminum Hub Rubber
Tread
DU100TW 2.40
1-1/4” Aluminum Hub Rubber
Tread
DU125TW 2.55
Landing Gear
Profile Main & Tailwheel Gear Description Part # Price
Long Duralloy Gear - fits
Twister and similar models
PLGL 13.99
Short Duralloy Gear - fits
Ringmaster - Flight Streak
and similar models
PLGS 11.95
1/8” Wire with clips &
eyelet
BM011 2.99
Profile Tailwheel Mount PTWM 1.95
Built-Up Main & Tailwheel Gear Description Part # Price
1/8” Grooved Block Mount
Pkg
LGM18 2.99
Fuse. Mount Duralloy Gear
– Large
BULG-L 13.99
1/8” Wire Wing Mount Gear BM016 3.99
Trike “Shark” 1/8 Wire Gear BM022 5.99
Trike “L.A. Heat” 1/8 Wire
Gear
BM023 5.99
Trike “Tempest” 1/8 Wire
Gear
BM024 5.99
Full Body Tailwheel Gear FTWM 2.99
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 37
Canopies from Hobby Fasteners Kits Description Part # Price
“Adams’ Special” Canopy ADMCAN 7.99
“Blue Bird” Canopy BBRDCAN 7.99
“Chipmunk” Canopy CHIPCAN 8.99
“Cougar” Canopy COUGCAN 7.99
“Derringer” Jet Canopy CDER 12.99
“Fierce Arrow” Canopy FACAN 7.99
“Green Box Nobler” Canopy NOCAN 5.99
“Grey Ghost” Canopy GHOSTCAN 3.99
“Hawker Hunter” Canopy HHCAN 12.99
“Hunter Stunter” Canopy HSCAN 5.99
“Hurricane” Canopy HURCAN 7.99
“Jamison Special” Canopy JAMICAN 5.99
“L.A. Heat” Canopy WC813 9.99
“L.A. Warmth” Canopy WARMCAN 7.99
“Mackey Crusader” Canopy WC807 5.99
“Mackey Lark” Canopy LARKCAN 7.99
“Madman” Canopy MADCAN 7.99
“ME-109” Canopy CANME 7.99
“Miss Kell” Canopy KELLCAN 7.99
“Mosquito” Canopy MOSSCAN 12.99
Description Part # Price
“Neptune II” Canopy NEPCAN 7.99
“Oriental Plus” Canopy OPLUSCAN 7.99
“P40K” Canopy P40KCAN 12.99
“P51D” Canopy WC809 7.99
“Pathfinder LE” Canopy PATHCAN 12.99
“Pinto” Canopy CS005 5.99
“Ruffy” Canopy RUFFCAN 7.99
“Shark 35” Canopy SHR35CAN 5.99
“Shark 45” Canopy SHARCAN 5.99
“Shoestring” Canopy SHOECAN 12.99
“Skylark” Canopy CANSKY 7.99
“Space Hound” Canopy HOUNDCAN 11.99
“Stills Stuka” Canopy STCAN 8.99
“Ta-152” Canopy TACAN 12.99
“Tempest” Canopy TEMPCAN 12.99
“Thunderbird” Canopy TBCAN 7.99
“Tony” Canopy TONYCAN 12.99
“Trivial Pursuit” Canopy TPCAN 7.99
“Venus” Canopy VENCAN 7.99
Covering Materials
Chinese Silk - The finest quality with a much tighter weave than ordinary silk. This means that you will use less dope to
fill this silk, which will result in a lighter finish. Polyspan is a polyester tissue that is waterproof and much stronger than silkspan. Finishing methods are similar to silk
and silkspan
Chinese Silk
Description Part # Price
Light Silk 48” X 36” LS002 12.99
Silk Span Description Part # Price
Light weight Silkspan OO 2.05
Medium weight Silkspan GM 2.35
Polyspan
Description Part # Price
Polyspan covering 12ft X 20” roll PSPAN 18.00
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 38
Miscellaneous Building Supplies
Heat Shrink Tubing Description Part # Price
1/16” – 5 pieces HF435 1.49
3/32” – 5 pieces HF436 1.49
1/8” – 5 pieces HF437 1.49
3/16” – 4 pieces HF438 1.49
1/4” – 4 pieces HF439 1.49
3/8” – 4 pieces HF440 1.49
Assorted sizes
(2 pieces each size)
HF441 4.50
1/16” X 18” – 2 pieces HF435B 2.50
3/32” X 18” – 2 pieces HF436B 2.50
1/8” X 18” – 2 pieces HF437B 2.50
3/16” X 18” – 2 pieces HF438B 2.50
Carbon Fiber Tapes, Mats, and Strips Description Part # Price
3/10 oz per Sq Yard Mat – 36”x36” CFMAT1 16.99
Razor Blades Description Part # Price
Single Edge Razor Blade #9 – 8 pack HF400 1.29
Mounting Tools and Balsa Gauge Description Part # Price
RSM Balsa Gauge GAUGE $3.99
RSM Engine Mounting Tool for OS
35-40 FP & LA 35-40 & 46 OSMNT $2.99
RSM Engine Mounting Tool for ST
40 & 46 ST46MNT $2.99
RSM Engine Mounting Tool for ST
G 51 51MNT $2.99
RSM Engine Mounting Tool for ST
60 ST60MNT $2.99
Control Horns
Description Part # Price
Laser Cut 1/8” Elevator Horns SHORN .99
Laser Cut 3/16” Elevator Horns RHORN .99
“T” Style Nylon Medium
(2 pack)
SH221 .75
RSM 3/32” Flap Horn (3 hole) HF332-3 7.49
RSM 1/8” Flap Horn (3 hole) HF18-3 7.49
RSM 3/32” Elevator Horn HF332-2 7.49
RSM 1/8” Elevator Horn HF18-2 7.49
3/32” Wire Horn “Lucky” Boxes HFLB332 2.75
1/8” Wire Horn “Lucky” Boxes HFLB18 2.75
Cyanoacrylate Glue (CYA) Description Part # Price
1 oz Thin CyA HFCA1 4.99
2 oz Thin CyA HFCA2 8.99
16 oz Thin CyA HFCA16 47.99
1 oz Gap Filling CyA HFCAG1 4.99
2 oz Gap Filling CyA HFCAG2 8.99
16 oz Gap Filling CyA HFCAG16 47.99
1 oz Extra Thick CyA HFCAT1 4.99
2 oz Extra Thick CyA HFCAT2 8.99
16 oz Extra Thick CyA HFCAT16 47.99
2 oz Accelerator with Pump HFCAAC2 4.99
8 oz Accelerator Refill HFCAAC8 9.99
1 oz Replacement Bottle HFBOT1 .95
2 oz Replacement Bottle HFBOT2 1.49
Replacement Bottle Cap HFCAP .99
8” CyA Applicator – 12 pack DB8100 6.99
Lead Weights and Weight Boxes Description Part # Price
1/4 oz with mounting hole – 6 SH561 375
3 oz strip in 1/4 oz snap offs – 2 HF280 5.49
Adjustable Wing Tip Weight Box
Uses SH561 ¼ oz weights
HFWTB 3.99
Music Wire Description Part # Price
3/32” x 36” Long MW332 1.10
1/8” x 36” Long MW18 1.15
Bellcranks
Description Part # Price
Fox 2” Aluminum FX86778 8.00
Nylon 3” HF1001 2.99
Fox 3” Aluminum FX86779 8.00
Sig 4” Nylon SH754 7.50
4” Nylon Suspended Bellcrank HF1002 9.99
4” Carbon Fiber, Suspended
Bellcrank
HF1003 19.99
Pushrods
Description Part # Price
Single 30” Pushrod System HF549 5.95
1/4” x 30” Glass fiber Pushrod CB1 4.50
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 39
Control Line Engines
Stock Engines
Description Part # Price
Magnum .15 XLS Engine MAG15 89.95
OS 25 LA C/L OSLA25 94.99
OS 46 LA C/L OSLA46 109.95
Engine Accessories
Tongue and Tube Mufflers Description Part # Price
Tongue Muffler for Fox 35 & OS40 TMUF 19.95
Tongue Muffler for Brodak .25 & .40 TMUFB 21.95
Tongue Muffler for OS 35S, K&B 40 &
OS 25 FP
TMUFOS35S 21.95
Tongue Muffler for Super Tigre 46-
51&60
TMUFST 21.95
Tube Muffler for Fox 35 & OS35-40FP TUBEFX 39.95
Tube Muffler for LA.46 TUBELA46 39.95
Tongue Muffler for Fox 35 & OS40 TMUF 19.95
Tongue Muffler for Brodak .25 & .40 TMUFB 21.95
Tongue Muffler for OS 35S, K&B 40 &
OS 25 FP
TMUFOS35S 21.95
Tongue Muffler for Super Tigre 46-
51&60
TMUFST 21.95
Glow Plugs
Fireball Glow Plugs
Description Part # Price
Standard Long Plug S20L 3.49
Standard Short Plug S20S 3.49
R/C Long Plug with Idle Bar S20RCL 3.95
R/C Short Plug with Idle Bar S20RCS 3.95
Extra Hot Long Plug H30L 3.49
Extra Hot Short Plug H30S 3.49
Super Cool High Nitro Long
Plug
SC10L 3.95
Super Cool High Nitro Short
Plug
SC10S 3.95
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 40
Fox Parts Description Part # Price
Hemi Head for Fox .35 designed by
Larry Foster
LJ35H 34.95
Backplate Stuffer for Fox .35 FX13511H 19.25
Laser cut Custom Back Plate Gasket FX35BP 1.99
Standard Piston & Liner for Fox .35 FX35050 65.50
Crankshaft for Fox .35 FX35170 26.00
Crankshaft Stud for Fox .40 FX40185 3.50
Thrust Washer for Fox .35 FX35220 15.80
Prop Washer for Fox .35 FX35230 6.00
Crankcase for Fox .35 FX35100 36.40
Standard Muffler for Fox .35 FX9225 20.95
Venturies Description Part # Price
Delrin Venturi for
OS .35-.40 FP
VENOS 9.99
Delrin Venturi for OS LA .46 VENLA46 11.99
Delrin True Venturi for
SuperTigre 46
VENST46 16.99
Delrin True Venturi for
SuperTigre 60
VENST60 16.99
Delrin Venturi for OS LA 25 VENLA25 9.99
Delrin Venturi for Magnum .15 VENXLS 19.99
Needle Valves Description Part # Price
Super Tigre .51 Needle Valve
Assembly (Fits Fox .35)
STNVA 9.99
Super Tigre Long Needle STNV 2.99
Super Tigre .46 Needle Valve
Assembly (fits OS .40FP)
STNVA46 14.99
Super Tigre .60 Needle Valve
Assembly
STNVA60 16.99
Prop Shaft Extensions Description Part # Price
10-32 x1/2 Prop Extension FX90410 8.00
10-32 x 3/4 Prop Extension FX90411 8.00
1/4-28 x 1/2 Prop Extension FX90412 8.00
1/4-28 x 3/4 Prop Extension FX90413 8.00
5/16-24 x 1/2 Prop Extension FX90414 8.00
5/16-24 x 3/4 Prop Extension FX90415 8.00
Mounting Pads and Templates Description Part # Price
Phenolic Engine Mounting Pads (2) HFEP 1.99
RSM Engine Mounting Tool for
OS 35-40 FP & LA 35-40 & 46
OSMNT 2.99
RSM Engine Mounting Tool for
ST 40 & 46
ST46MNT 2.99
RSM Engine Mounting Tool for ST G
51
51MNT 2.99
RSM Engine Mounting Tool for ST
60
ST60MNT 2.99
Screw and Gasket Sets Description Part # Price
Laser Cut Custom Back Plate
Gasket for Fox .35
FX35BP 1.99
"Back Plate Gasket" for LA .25 LAS25BP 1.99
"Back Plate Gasket Kit" for LA
.25
LAS25BPK 5.75
"Back Plate Gasket Kit" for LA
.46
LAS46GK 3.95
Screws & Gasket Set for
Fox .35
FX35SG 3.99
Gasket Set for ST 60 ST60G 3.99
Socket Head Bolt Set for
Fox .35
FX35SH 2.99
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 41
Propellers RSM Propellers
CNC machined on a 3 axis router to insure that both blades are identical
High quality finish applied to resist fuel deterioration
Smooth prop face combined with thin blade reduces load on engine
Efficient airfoil shape
Description Part # Price
RSM Propeller 9-6 RSM0906 5.99
RSM Propeller 10-6 RSM1060 6.25
RSM Propeller 11-6 RSM1160 6.75
RSM Propeller 12-5.5 RSM1255 7.25
RSM Propeller Test Data
CNC machined on a 3 axis router to insure that both blades are identical
High quality finish applied to resist fuel deterioration
Smooth prop face combined with thin blade reduces load on engine
Efficient airfoil shape
20 thousands of an inch undercamber to increase thrust
Pitch of Props
Using a Prather Pitch Gauge we measured Stations 7 & 10 (which is the area that the propeller uses to create thrust) to
determine the actual pitch.
10” Prop 11” Prop
Station 7 5.5 5.9
Station 10 5.2 4.8
Static Testing
We compared the RSM 10” prop against the Rev-Up 10-6 EW and the George Aldrich Custom Special 10-6. Engine used
was a Hunter .19 diesel. This engine was chosen to determine how much the test props would load down the engine.
Optimum engine performance was obtained for each prop tested.
Prop Tested RPM
Achieved
Static Thrust
Rev-Up 10-6 EW 7400 28 oz
Aldrich 10-6
Custom
7400 28 oz
RSM 10-6 8600 36 oz
This test showed that the RSM prop had 20% more static thrust while not loading down the engine.
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 42
Prop Wrenches and Reamers Description Part # Price
Fox 4-Way Prop Wrench FX70104 15.95
Fox 4-Step Reamer FX70201 12.00
Fox 7-8mm Reamer FX70202 12.00
Fox 10mm Reamer FX70203 12.00
Spinners
Aluminum Description Part # Price
1-3/4” – weight 8/10 oz VOR175 20.95
2” – weight 1-1/10 oz VOR200 21.95
2-1/4” – weight 1-1/2 oz VOR225 22.95
1-3/4” Needle Nose VOR175N 26.95
2” Needle Nose VOR200N 27.95
2-1/4” Needle Nose VOR225N 29.95
1/4-28 adapter nut short NUT1 5.95
1/4-28 adapter nut long NUT2 5.95
Carbon Fiber Description Part # Price
1-3/4” (42mm) CF175 29.99
2” (52mm) CF200 32.99
2-1/4” (58mm) CF2125 37.99
Plastic Color Size Part # Price
White 1-1/2” SH15-1 3.89
1-3/4” SH175-1 4.39
2” SH20-1 4.99
2-1/4” SH225-1 5.79
Black 1-1/2” SH15-2 3.89
1-3/4” SH175-2 4.39
2” SH20-2 4.99
2-1/4” SH225-2 5.79
Red 1-1/2” SH15-3 3.89
1-3/4” SH175-3 4.39
2” SH20-3 4.99
2-1/4” SH225-3 5.79
Color Size Part # Price
Blue 1-1/2” SH15-4 3.89
1-3/4” SH175-4 4.39
2” SH20-4 4.99
2-1/4” SH225-4 5.79
Yellow 1-1/2” SH15-5 3.89
1-3/4” SH175-5 4.39
2” SH20-5 4.99
2-1/4” SH225-5 5.79
Fuel Lines, Filters, and Fillers
In-Line Fuel Filters Description Part # Price
“Crap Trap” Filter SU187 4.90
Fuel Filler Syringes Description Part # Price
5 oz Monoject Syringe HF679 11.95
High Heat Silicone Fuel Line Description Part # Price
.062 I.D. Silicone Fuel Line 2 ft FLM2 3.49
.062 I.D. Silicone Fuel Line 25 ft FLM25 34.95
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 43
Tanks
If you have an application that requires a special tank, please contact our office at
(951) 678-1406 to discuss your needs.
Profile Uniflow (HF Style) 2” Wide X 1” High
Capacity Length Part # Price
2 oz. 2 in. HF200U 12.00
2.5 oz. 2 1/2 in. HF250U 12.00
3 oz. 3 in. HF300U 12.00
3.5 oz. 3 1/2 in. HF350U 12.00
4 oz. 4 in. HF400U 12.00
4.5 oz. 4 1/2 in. HF450U 12.00
5 oz. 5 in. HF500U 12.00
5.5 oz. 5 1/2 in. HF550U 12.00
Built-up Uniflow Slide In (BU Style) All plumbing forward
2” Wide X 1” High
Capacity Length Part # Price
2.5 oz 2 1/2 in. GRW250BU 12.00
3 oz 3 in. GRW300BU 12.00
3.5 oz 3 1/2 in. GRW350BU 12.00
4 oz 4 in. GRW400BU 12.00
4.5 oz 4 1/2 in. GRW450BU 12.00
5 oz 5 in. GRW500BU 12.00
5.5 oz 5 1/2 in. GRW550BU 12.00
6 oz 6 in. GRW600BU 12.00
6.5 oz 6 1/2 in. GRW650BU 12.00
7 oz 7 in. GRW700BU 12.00
Profile Standard Vent (S Style) 2-3/16” Wide X 1-7/16” High
Capacity Length Part # Price
3 oz 2.25 in. GRW300S 11.00
3.5 oz 2.65 in. GRW350S 11.00
4 oz 3.05 in. GRW400S 11.00
4.75 oz 3.45 in. GRW475S 11.00
5.25 oz 3.90 in. GRW525S 11.00
Snub-Nose Uniflow (U Style) 2-1/4” Wide X 1-1/4” High
Designed for short nosed ships like a Flight Streak,
Ringmaster or Buster
Capacity Length Part # Price
2 oz 1.40 in. GRW200U 11.00
2.5 oz 1.875 in. GRW250U 11.00
3 oz 2.25 in. GRW300U 11.00
3.5 oz 2.65 in. GRW350U 11.00
4 oz 3.05 in. GRW400U 11.00
4.75 oz 3.45 in. GRW475U 11.00
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 44
Built-up Uniflow Slide In (WU Style) 2” Wide X 1” High
Capacity Length Part # Price
3 oz 3 in. GRW300WU 12.00
3.5 oz 3 ½ in. GRW350WU 12.00
4 oz 4 in. GRW400WU 12.00
4.5 oz 4 ½ in. GRWG50WU 12.00
5 oz 5 in. GRW500WU 12.00
5.5 oz 5 ½ in. GRW550WU 12.00
6 oz 6 in. GRW600WU 12.00
6.5 oz 6 ½ in. GRW650WU 12.00
7 oz 7 in. GRW700WU 12.00
Old Time Stunt Uniflow 2” Wide X 1” High
Specially Designed for Upright Engines
Capacity Length Part # Price
2.5 oz 2 1/2 in. OTS250 12.00
3 oz 3 in. OTS300 12.00
3.5 oz 3 1/2 in. OTS350 12.00
4 oz 4 in. OTS400 12.00
Chicken Hopper Style (C Style)
Capacity Length Part # Price
2 oz 1.40 in. GRW200C 17.99
3.25 oz 2.25 in. GRW325C 17.99
3.75 oz 2.65 in. GRW375C 17.99
4.25 oz 3.05 in. GRW425C 17.99
5 1/8 oz 3.45 in. GRW5125C 17.99
5.75 oz 3.90 in. GRW575C 17.99
Balloon Tanks For 1/2A Description Capacity Part # Price
Balloon Tank for
1/ 2 A
1.75 oz BALL 5.95
Balloon Tank Kit -- BALLKIT 2.95
Tank Accessories Description Part # Price
Tank Vent Caps (6) GRWTVC 1.99
Fuselage Vent Tubes GRWFVT 4.95
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 45
Handles and Lines
Control Line Handles Description Part # Price
“Renger” 1/2A Handle R12A 9.99
“Renger” .15 Handle R15A 11.99
1/2A Handle with Lines SH544 3.30
Expert Level w/Length and
Spacing Adjustments
HFPRO 34.95
Replacement Safety Thong THONG 1.99
Replacement Wooded Grip HFWOOD 11.99
Replacement Front Bar (includes
Cable)
HFBAR 20.99
Replacement Handle Cable HFCABLE 6.95
Handle Grip Tape HGTAPE 4.95
.016" Copper Wrapping Wire HF601 1.05
Line Wrapping Set - Wire +
Eyelets
HF602 1.99
Line Connectors Description Part # Price
Slide Style 15# 1/2A Clip (4) CONS 1.25
Slide Style 22# A-B Clip (4) CONM 1.50
Line Connector, Squeeze Style 80#
C-D Clip 4 pack
CLCON112 4.99
Line Connector, Squeeze Style
100# C-D Clip (4)
CLCON114 5.99
Line Reels Description Part # Price
4" Plastic Line Reel CLR 3.99
Stainless Steel Line Clips MLC .99
Eyelets & Crimp Sleeves for Lines Description Part # Price
Bag of 25 Line Eyelets HF600 2.99
Chrome Plated Brass Sleeves
for.012-.018 Wire (50)
HFSL052 5.49
Chrome Plated Brass Sleeves
for.018-.027 Wire (50)
HFSL071 7.99
Leadout Wire Sets Description Part # Price
1/2A Leadout Wire Kit .021 X 4' HF021-4 2.25
C-D Leadout Wire Kit .027 X 6' HF027-6 3.25
C-D Leadout Wire Kit .027 X 12' HF027-12 3.95
Adjustable Leadout Guide Wood LOG1 4.25
Twin Adjustable Leadout Guide LOG2 4.95
Adjustable Wing Tip Weight Box HFWTB 3.99
Stainless Steel Control Lines All control lines are not identical! Don't be fooled by lines that “fly smoother". If you reduce the diameter of the lines they
will "fly smoother". RSM Distribution guarantees that our line will measure at least the minimum necessary diameter
required by AMA rules!
Braided Control Lines on 4" Reel Description Part # Price
.008 Control Line 35' Long CL008X2-35 8.60
.008 Control Line 52' Long CL008X2-52 14.99
.008 Control Line 70' Long CL008X2-70 19.99
.012 Control Line 35' Long CL012X2-35 14.40
.012 Control Line 52' Long CL012X2-52 15.99
.012 Control Line 70' Long CL012X2-70 20.75
.015 Control Line 52' Long CL015X2-52 13.49
.015 Control Line 60' Long CL015X2-60 16.99
.015 Control Line 70' Long CL015X2-70 18.99
.018 Control Line 60' Long CL018X2-60 16.99
.018 Control Line 70' Long CL018X2-70 18.99
Bulk Line on Reel Description Part # Price
.015 Braided Line X 1,000 Feet CL015B 69.99
.018 Braided Line X 1,000 Feet CL018B 69.95
Twin Adjustable Leadout Guide LOG2 4.95
Adjustable Wing Tip Weight Box HFWTB 3.99
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 46
Hardware
Aircraft Hex Nuts Size Description Part # Price
2-56 bag of 25 HF1 1.15
bag of 100 HF1A 3.50
4-40 bag of 25 HF2 1.15
bag of 100 HF2A 3.50
6-32 bag of 25 HF3 1.15
bag of 100 HF3A 3.50
8-32 bag of 25 HF4 1.15
bag of 100 HF4A 3.50
T-Handle Socket Drive Wrench Fits socket size Part # Price
4-40 HF450 4.95
6-32 HF451 4.95
M2 HF460 4.95
M2.5 HF461 4.95
M3 HF462 4.95
Sheet Metal Screws Size Description Part # Price
#2 X 1/2 bag of 25 HF180 .99
bag of 100 HF180A 2.99
#4 X 3/8 bag of 25 HF188 .99
bag of 100 HF188A 2.99
#4 X 1/2 bag of 25 HF189 .99
bag of 100 HF189A 2.99
#4 X 3/4 bag of 25 HF190 .99
bag of 100 HF190A 2.99
#6 X 1/2 bag of 25 HF191 .99
bag of 100 HF191A 2.99
#6 X 3/4 bag of 25 HF192 .99
bag of 100 HF192A 2.99
#8 X 1/4 bag of 25 HF193 .99
bag of 100 HF193A 2.99
#8 X 1/2 bag of 25 HF194 .99
bag of 100 HF194A 2.99
#8 X 3/4 bag of 25 HF195 .99
bag of 100 HF195A 2.99
Heat-Treated Propeller Nuts
(2 pack)
Description Part # Price
1/4-28 HFPN1 1.99
5/16-24 HFPN2 1.99
M5-0.8 HFPN3 1.99
M6-1.0 HFPN4 1.99
M7-1.0 HFPN5 1.99
M8-1.25 HFPN6 1.99
Blind Nuts Size Description Part # Price
4-40 bag of 25 HF20 2.99
bag of 100 HF20A 8.99
6-32 bag of 25 HF21 3.35
bag of 100 HF21A 9.99
8-32 bag of 25 HF22 3.35
bag of 100 HF22A 9.99
10-32 bag of 25 HF23 3.35
bag of 100 HF23A 9.99
1/4-20 bag of 25 HF24 3.35
bag of 100 HF24A 9.99
Mounting Bolt Sets Round Head Bolts
With Nuts and Washers
Size Part # Price
4-40 X 1-1/4 HF127 1.10
6-32 X 1-1/4 HF128 1.10
Round Head Bolts
With Nuts and Washers
Size Part # Price
4-40 X 1-1/4 HF127 1.10
6-32 X 1-1/4 HF128 1.10
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 47
Socket Head Bolts Size Description Part # Price
2-56 X 1/4 bag of 25 HF71 4.65
bag of 100 HF71A 13.99
2-56 X 3/8 bag of 25 HF72 4.65
bag of 100 HF72A 13.99
2-56 X 1/2 bag of 25 HF73 4.65
bag of 100 HF73A 13.99
4-40 X 1/4 bag of 25 HF74 2.35
bag of 100 HF74A 6.99
4-40 X 3/8 bag of 25 HF75 2.35
bag of 100 HF75A 6.99
4-40 X 1/2 bag of 25 HF76 2.35
bag of 100 HF76A 6.99
4-40 X 3/4 bag of 25 HF77 2.35
bag of 100 HF77A 6.99
4-40 X 1 bag of 25 HF78 4.65
bag of 100 HF78A 13.99
4-40 X 1-1/4 bag of 25 HF79 4.65
bag of 100 HF79A 13.99
Size Description Part # Price
4-40 X 1-1/2 bag of 25 HF80 4.65
bag of 100 HF80A 13.99
6-32 X 1/4 bag of 25 HF81 2.35
bag of 100 HF81A 6.99
6-32 X 1/2 bag of 25 HF82 2.35
bag of 100 HF82A 6.99
6-32 X 3/4 bag of 25 HF83 2.35
bag of 100 HF83A 6.99
6-32 X 1 bag of 25 HF84 2.35
bag of 100 HF84A 6.99
6-32 X 1-1/4 bag of 25 HF85 4.65
bag of 100 HF85A 13.99
6-32 X 1-1/2 bag of 25 HF86 4.65
bag of 100 HF86A 13.99
8-32 X 1-1/2 bag of 25 HF87 2.35
bag of 100 HF87A 6.99
Round Head Bolts complete with nuts
Size Description Part # Price
2-56 X 3/16 bag of 25 HF49 1.99
bag of 100 HF49A 6.99
2-56 X 3/8 bag of 25 HF50 1.99
bag of 100 HF50A 6.99
2-56 X 1/2 bag of 25 HF51 1.99
bag of 100 HF51A 6.99
2-56 X 3/4 bag of 25 HF52 1.99
bag of 100 HF52A 6.99
2-56 X 1 bag of 25 HF53 1.99
bag of 100 HF53A 6.99
4-40 X 1/4 bag of 25 HF54 1.99
bag of 100 HF54A 6.99
4-40 X 1/2 bag of 25 HF55 1.99
bag of 100 HF55A 6.99
4-40 X 3/4 bag of 25 HF56 1.99
bag of 100 HF56A 6.99
Size Description Part # Price
4-40 X 1 bag of 25 HF57 1.99
bag of 100 HF57A 6.99
4-40 X 1-1/4 bag of 25 HF58 1.99
bag of 100 HF58A 6.99
4-40 X 1-1/2 bag of 25 HF59 1.99
bag of 100 HF59A 6.99
6-32 X 1/2 bag of 25 HF60 1.99
bag of 100 HF60A 6.99
6-32 X 3/4 bag of 25 HF61 1.99
bag of 100 HF61A 6.99
6-32 X 1 bag of 25 HF62 1.99
bag of 100 HF62A 6.99
6-32 X 1-1/4 bag of 25 HF63 1.99
bag of 100 HF63A 6.99
6-32 X 1-1/2 bag of 25 HF64 1.99
bag of 100 HF64A 6.99
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 48
Stainless Steel 10 per bag
Size Part # Price
4-40 Hex Nuts HFS2 1.99
4-40 X 1/4 Socket Cap Head HFS74 2.49
4-40 X 3/8 Socket Cap Head HFS75 2.49
4-40 X 1/2 Socket Cap Head HFS76 2.49
4-40 X 5/8 Socket Cap Head HFS77 2.49
4-40 X 3/4 Socket Cap Head HFS78 2.49
4-40 X 1 Socket Cap Head HFS79 2.49
4-40 X 1-1/4 Socket Cap Head HFS80 2.49
4-40 X 1/4 Flat Head Socket Cap HFS89 2.49
4-40 X 3/8 Flat Head Socket Cap HFS90 2.49
4-40 X 1/2 Flat Head Socket Cap HFS91 2.49
4-40 X 5/8 Flat Head Socket Cap HFS92 2.49
4-40 X 3/4 Flat Head Socket Cap HFS93 2.49
4-40 X 1 Flat Head Socket Cap HFS94 2.49
Washers Size Description Part # Price
# 2 Flat Washer bag of 25 HF30 .69
bag of 100 HF30A 1.99
# 4 Flat Washer bag of 25 HF31 .69
bag of 10 HF31A 1.99
# 6 Flat Washer bag of 25 HF32 .69
bag of 100 HF32A 1.99
# 8 Flat Washer bag of 25 HF33 .69
bag of 100 HF33A 1.99
# 2 Lock Washer bag of 25 HF40 .69
bag of 100 HF40A 1.99
# 4 Lock Washer bag of 25 HF41 .69
bag of 100 HF41A 1.99
# 6 Lock Washer bag of 25 HF42 .69
bag of 100 HF42A 1.99
# 8 Lock Washer bag of 25 HF43 .69
bag of 100 HF43A 1.99
Metric Socket Cap Head
10 per bag
Size Part # Price
M3-0.5 X 6 Socket Cap Head HFM75 1.99
M3-0.5 X 8 Socket Cap Head HFM76 1.99
M3-0.5 X 10 Socket Cap Head HFM77 1.99
M3-0.5 X 12 Socket Cap Head HFM78 1.99
M3-0.5 X 16 Socket Cap Head HFM79 1.99
M3-0.5 X 20 Socket Cap Head HFM80 2.75
M3-0.5 X 25 Socket Cap Head HFM81 2.75
M3-0.5 X 30 Socket Cap Head HFM82 2.75
M3-0.5 X 6 Socket Cap Flat Head HFM89 1.99
M3-0.5 X 8 Socket Cap Flat Head HFM90 1.99
M3-0.5 X 10 Socket Cap Flat Head HFM91 1.99
M3-0.5 X 12 Socket Cap Flat Head HFM92 1.99
M3-0.5 X 16 Socket Cap Flat Head HFM93 1.99
M3-0.5 X 20 Socket Cap Flat Head HFM94 1.99
M4-0.7 X 8 Socket Cap Flat Head HFM96 1.99
M4-0.7 X 10 Socket Cap Flat Head HFM97 1.99
M4-0.7 X 12 Socket Cap Flat Head HFM98 1.99
M4-0.7 X 16 Socket Cap Flat Head HFM99 1.99
M4-0.7 X 20 Socket Cap Flat Head HFM100 1.99
M4-0.7 X 25 Socket Cap Flat Head HFM101 1.99
M4-0.7 X 30 Socket Cap Flat Head HFM102 1.99
Nylon Bolts bags of 10
Size Description Part # Price
6-32 X 1 Binder Head HF495 1.99
10-24 X 1-1/2 Binder Head HF496 1.99
10-32 X 2 Binder Head HF497 1.99
8-32 X 1 Binder Head HF499 1.99
10-32 X 1 Binder Head HF500 1.99
1/4-20 X 1 Binder Head HF501 1.99
1/4-20 x 1-1/2 Binder Head HF502 1.99
1/4-20 x 2 Binder Head HF503 1.99
1/4-20 x 1 Flat Head HF510 2.50
1/4-20 x 1-1/2 Flat Head HF511 2.50
Nylon Flat Washers Size Description Part # Price
# 4 bag of 25 HF520 .79
bag of 100 HF520A 2.49
# 6 bag of 25 HF521 .79
bag of 100 HF521A 2.49
# 8 bag of 25 HF522 .79
bag of 100 HF522A 2.49
# 10 bag of 25 HF523 .79
bag of 100 HF523A 2.49
Nylon Lock Nuts Size Description Part # Price
4-40 bag of 25 HF11 1.99
bag of 100 HF11A 5.50
6-32 bag of 25 HF12 1.99
bag of 100 HF12A 5.50
8-32 bag of 25 HF13 1.99
bag of 100 HF13A 5.50
2013 – Revised 11/13/2013
RSM Distribution Catalog Page 49
Nylon Cable Ties
Color Size Description Part # Price
White 4"
20/Bag HF101-WHT 1.50
100/Bag HF101-WHT-A 3.99
8" 20/Bag HF111-WHT 1.99
100/Bag HF111-WHT-A 7.99
11" 20/Bag HF113-WHT 2.50
100/Bag HF113-WHT-A 10.99
15" 20/Bag HF115-WHT 3.99
100/Bag HF115-WHT-A 14.99
Black 4"
20/Bag HF101-BLK 1.50
100/Bag HF101-BLK-A 3.99
8" 20/Bag HF111-BLK 1.99
100/Bag HF111-BLK-A 7.99
11" 20/Bag HF113-BLK 2.50
100/Bag HF113-BLK-A 10.99
15" 20/Bag HF115-BLK 3.99
100/Bag HF115-BLK-A 14.99
Blue 4"
20/Bag HF101-BLU 1.50
100/Bag HF101-BLU-A 3.99
8" 20/Bag HF111-BLU 1.99
100/Bag HF111-BLU-A 7.99
11" 20/Bag HF113-BLU 2.50
100/Bag HF113-BLU-A 10.99
15" 20/Bag HF115-BLU 3.99
100/Bag HF115-BLU-A 14.99
Green 4"
20/Bag HF101-GRN 1.50
100/Bag HF101-GRN-A 3.99
8" 20/Bag HF111-GRN 1.99
100/Bag HF111-GRN-A 7.99
11" 20/Bag HF113-GRN 2.50
100/Bag HF113-GRN-A 10.99
15" 20/Bag HF115-GRN 3.99
100/Bag HF115-GRN-A 14.99
Red 4"
20/Bag HF101-RED 1.50
100/Bag HF101-RED-A 3.99
8" 20/Bag HF111-RED 1.99
100/Bag HF111-RED-A 7.99
11" 20/Bag HF113-RED 2.50
100/Bag HF113-RED-A 10.99
15" 20/Bag HF115-RED 3.99
100/Bag HF115-RED-A 14.99
Color Size Description Part # Price
Yellow 4"
20/Bag HF101-YEL 1.50
100/Bag HF101-YEL-A 3.99
8" 20/Bag HF111-YEL 1.99
100/Bag HF111-YEL-A 7.99
11" 20/Bag HF113-YEL 2.50
100/Bag HF113-YEL-A 10.99
15" 20/Bag HF115-YEL 3.99
100/Bag HF115-YEL-A 14.99
Orange 4”
20/Bag HF101-ORG 1.50
100/Bag HF101-ORG-A 3.99
8” 20/Bag HF111-ORG 1.99
100/Bag HF111-ORG-A 7.99
11” 20/Bag HF113-ORG 2.50
100/Bag HF113-ORG-A 10.99
15” 20/Bag HF115-ORG 3.99
100/Bag HF115-ORG-A 14.99
Purple 4”
20/Bag HF101-PUR 1.50
100/Bag HF101-PUR-A 3.99
8” 20/Bag HF111-PUR 1.99
100/Bag HF111-PUR-A 7.99
11" 20/Bag HF113-PUR 2.50
100/Bag HF113-PUR-A 10.99
15” 20/Bag HF115-PUR 3.99
100/Bag HF115-PUR-A 14.99
Fluor.
Green 4”
20/Bag HF101-FGN 1.50
100/Bag HF101-FGN-A 3.99
8” 20/Bag HF111-FGN 1.99
100/Bag HF111-FGN-A 7.99
11” 20/Bag HF113-FGN 2.50
100/Bag HF113-FGN-A 10.99
15” 20/Bag HF115-FGN 3.99
100/Bag HF115-FGN-A 14.99
Fluor.
Yellow 4”
20/Bag HF101-FYL 1.50
100/Bag HF101-FYL-A 3.99
8” 20/Bag HF111-FYL 1.99
100/Bag HF111-FYL-A 7.99
11” 20/Bag HF113-FYL 2.50
100/Bag HF113-FYL-A 10.99
15” 20/Bag HF115-FYL 3.99
100/Bag HF115-FYL-A 14.99