Rotary Air-conditioning Compressors Specification Corr.pdfYZGYZGYZGYZG- ---Q06Q06Q06Q064...

YZGYZGYZGYZG----Q06Q06Q06Q064444Y4/GSY4/GSY4/GSY4/GS----001B001B001B001B

1

Rotary Air-conditioning Compressors Specification

YZG-Q064Y4 Compressor Model

The Customer

Air-conditioner Model

QINGANQINGANQINGANQINGAN SIGNATURESIGNATURESIGNATURESIGNATURE CUSTOMECUSTOMECUSTOMECUSTOMERRRR’SSSS APPROVALAPPROVALAPPROVALAPPROVAL

。 This document will be effective with your authorized signature .please return one

copy of this document.

Compile：

Examine：

Approve：

Xi’an Qing’an Refrigeration Equipment Co., Ltd

共 11 页/11 page altogether


2

1 Specification of Compressor

1.1 Application Scope

Air-conditioner Type 单冷 Cooling

Refrigerant

R134a

Range of Ambient temperature 15~43

Range of evaporating temperature -10~15

Range of Condensing temperature 35~56

Rated Voltage / Frequency / Phase

220-240V~/50Hz/1Φ

Approval Type CCC、TUV、CE

1.2 Basic Specification

Compressor Type Hermetic Rotary Compressor

Displacement

6.4cm3/rev

Cylinder Number

1

Suction Tube(I.D)

Φ6.5mm

Discharge Tube(I.D)

Φ5.7mm

Net Weight (Oil Included)

4.5kg

Oil & Oil Charge

RB68EP&150 mL

Painting Black Color Paint

1.3 Specification of Motor

Motor Type Single Phase Motor

Pole 2 极 2 Pole

Winding resistance (at 20) Main 17.2Ω±10% Sub 41.5Ω±10%


220-240V~/50Hz/1Φ

Rated Revolution

2780 rev/min

Motor Starting Type Permanent Split Capacitor

3


1.4 Electrical Component

Parts Name Specification

Running Capacitor (Self Provided)

6.5µF/450V·AC

Overload Protector (Outer)

BF225-JB

2. Performance Parameter

2.1 Test Condition & Performance

Parts Name Unit Numerical Value

Cooling Capacity

W︱Btu ≥690×95%︱2350×95%

（at 220V）

Input Power W

≤295×105%

（at 220V）

Current A

≤1.4×105%

（at 220V）

EER

W/W︱Btu/W ≥2.3×95%︱7.8×95%

（at 220V）

Noise dB(A)

≤53

Vibration

m/s2

≤15

Test Condition

w w


Condensing temperature

220V~/50Hz/1Φ

:54.4

w Evaporating temperature :7.2 w w

Suction Gas temperature

Degree of Super-cooling

:35.0 :8.3

w Ambient temperature :35

2.2 Starting & Running


Locked rotor amps

A 5

（at 220V）

Starting Voltage V

≥187

Running Voltage Range V 198～264

4


2.3 Other Characteristics


Leakage Testing Pressure

MPa

2.1

Shell Mechanical Strength Pressure

MPa

7.4

Insulation Class

B Class

Insulation Resistance

MΩ

≥30

Electric Strength 1500V 1min

or 1800V 1sec

Residual Moisture

mg

≤75

Residual Impurity

mg

≤20

Grounding Resistance

Ω

≤0.1

The Max. Filling Amount of Refrigerant

g

300

3. Operating Conditions of Compressor

3.1 When installed intothe refrigerating system,obey to accessories insrallation diagram.

3.2 3min。The period of turning down and restarting the compressor should be more than 3 minutes.

3.3 The compressor should not be left opened in the atmosphere for more than 5 minutes, otherwise the

moisture and impurity would enter into the compressor.

3.4 The degree of vacuum in the refrigerating system should be less than 20Pa room temperature just before charging refrigerant. The residual moisture should be less than 40ppm in the system.

3.5 Prevent moisture from entering into the enclosed unit system. When the moisture entered into the unit

with refrigerant R134a,the refrigerant oil and the organic compound material presented in the hermetic

motor will possibly decompose on the affecting of in the capillary depositing and the reducing of

insulation resistance.

3.6 To dehumidify the residual moisture mixed in the refrigerant in the cycling system, we suggest

install a dryer(molecular-sieve dryer) in the cycling system.

5


3.7 Prevent the impurities from entering into the enclosed unit system. When the impurities entered into the

enclosed system,it will damage the moving mechanism partsand result in capillary depositing.

Keep the system clean when assembly system. Non-CL cleaning liquid should be applied. Residual

cleaning liquid should not over 0.03g/m3 and no metal powder allowed in

system.

No welding powder or dust should be prevented when welding the compressor to pipe. The CL element

content in welding powder should keep in a low level.If the welding powder need adding some water,please

use no-CL water. Prevent oxi surface when doing dry-welding.

3.8 Lay down of the compressor is forbidden.Do not put the compressor in open area. The compressor should

be stored in clean and dry rooms.

4. Parts and Drawing List

Parts Name Code QTY/Set Remarks

Compressor

YZG-Q064Y4

1 Shape

Electric container cap

YZG/AZ-00-16

1

Spring clip

YZG/AZ-00-17

1

Absorber Support

YZG/AZ-00-18

3

Rubber Pad

YZG/AZ-00-19

1

Outer compound protector

BF225-JB

1

Electric Wiring Diagram

Accessories Installation Diagram

5. The Period of Validity

This document will take effect after the confirmation of your company with the authorized signature when

design modification is approved by the customer, the current document is unavailable.

Rotary Air-conditioning Compressors Specification Corr.pdfYZGYZGYZGYZG- ---Q06Q06Q06Q064...

Documents

Transcript of Rotary Air-conditioning Compressors Specification Corr.pdfYZGYZGYZGYZG- ---Q06Q06Q06Q064...