ROOFING AND BUILDING MATERIALS - vliepa.com · 10 m 135 g/m2 1.50 m 50 m vliepavap 180 PP with NSK...

ROOFING ANDBUILDING MATERIALS

Roofing and Building Materials www.vliepa.com

6

7

vliepaspan 120 UD

vliepaspan without NSK

vliepaspan with NSK

vliepavap 130 PP-AL with NSK

vliepavap PP with NSK

3

Fibre glass material GL-S 120

Polyester fleece PVh 300

Geotextile PES

Flat Roofs

Pitched Roofs

Adhesive Technology

Building Materials

10

Ridge sealing tape 135

Nail sealing tape NDB 1S

Nail sealing tape NDB

Seam tape NSKB 1S

11

Fibre glass material GUA 60

Fibre glass material GL-S 75 AV / A2

Wool felt board WFP

4

5

Geotextile PES plus

Vapour barrier foil

vliepatherm PAL

vliepatherm AL-SK

vliepatherm protect pro SK

8

9

Sealing tape NKB/NKB 1S

Sealing tape BKB

Universaltape

Repair tape AL 1S

Adhesive tape VKB

vliepabond cartridge adhesive

Solvent welding agent THF

vliepapur roof adhesive

Product Overview

Fibre glass material made out of textile glass fibres

Separating/fire protection layer (A2) for the sealing of flat roofs between polystyrene and plastic mem-branes to avoid plasticiser migration.

Drillproof.

Needle-punched nonwoven material made out of polyester

Separating/protective layer for the renovation of flat roofs with mechanical fastening, as well as for gravel roofs and as a separating/protective layer for installation beneath sealing foils to prevent damage.

Rotproof, drillproof

Fibre glass material GL-S 120*

Polyester fleece PVh 300*

Designation Fire performance Colour Weight Roll width Roll length

GL-S 120* DIN EN 13501-1Class E

white 120 g / m2 2.00 m 100 m

GL-S 120 A2* DIN 4102-1 A2

white 120 g / m2 2.00 m 100 m


PVh 300 1.3*

DIN EN 13501-1Class E-d2

white 300 g / m2 2.00 m 50 m

PVh 300 2.0

DIN 4102-1Class E-d2

white 300 g / m2

+/-10%2.00 m 50 m

PVh 300 3.0*

DIN EN 13501-1Class E-d2

Light green

300 g / m2 2.20 m 50 m

* Material guarantee registered with Central Association of German Roofing Contractors (ZVDH)Our products are available in other dimensions and thicknesses on request. Further technical information is also available at www.vliepa.com

Roofing Materials for Flat RoofsRoofing and Building Materials

Needle-punched nonwoven material made out of polyester

Protection, storage and drainage mat for green roofs/gravel roofs.

Protective layer to prevent erosion and relocation in water engineering: pond liners, swimming pool construction.

Protective layer for embankment, platform and equestrian centre construction, as well as for installation beneath landfill sealing.

Shelf life in the ground: A shelf life of at least 5 years at a pH-value of 4-9 and a ground temperature of 25°C..

Geotextile PESDesignation Weight Fire performance Colour Roll width Roll length

PES 150 150 g / m2 DIN EN 13501-1 Class F

multicol-our

2.00 m 50 m


multicol-our

2.00 m 50 m


multicol-our

2.00 m 50 m


multicol-our

2.00 m 50 m


multicol-our

2.00 m 25 m

PES 1.100 1.100 g / m2 DIN EN 13501-1 Class F

multicol-our

2.00 m 15 m

3

Geotextile PES plus


Roofing Materials for Flat Roofs

Needle-punched nonwoven material made out of polyester. CE marking EN 13249, 13250, 13251, 13252, 13253, 13254, 13255, 13257, 13265, 13256

Filtering, reinforcing and separating purposes in road construction and other traffic areas, earthworks and foundations, as well as in retaining structures for drainage systems, erosion protection systems (coastal protection) and sewer construction.

Durability in natural soils of at least 25 years.

Filtering, reinforcing and separating purposes for traffic areas, earthworks and foundations for drainage systems.

Erosion protection systems for retention basins and dams, sewer construction and the disposal of solid waste.

Roofing and Building Materials

Designation Fire performance GRK class

Col-our

Weight Roll width Roll length

PES 120 DIN EN 13501-1 Class E

2 grey 120 g / m2 2.20 m 100 m


3 grey 150 g / m2 2.20 m4.40 m

100 m


3+ grey 200 g / m2 2.20 m4.40 m

100 m


4 grey 250 g / m2 2.20 m4.40 m

100 m


5 grey 340 g / m2 5.40 m 100 m

Special polyethylene film, coloured blue, CE marking EN 13984

Vapour barrier foil for flat and pitched roofs subject to low physical stresses on the building structure.

Vapour barrier foil*

Designation Fire performance Col-our

SD value

Thick-ness

Roll width Roll length

PE 016 DIN EN 13501-1 Class E

blue > 120 m 160 µ 4.00 m 25 m

PE 020* DIN EN 13501-1 Class E

blue > 100 m> 250 m

200 µ 4.00 m6.00 m

25 m


blue > 120 m > 180 m

250 µ 4.00 m 25 m


blue > 200 m> 380 m

400 µ 4.00 m 25 m

4


Roofing Materials for Flat RoofsRoofing and Building Materials

vliepatherm PAL * Aluminium composite foil, CE marking EN 13984

Diffusion tight vapour barrier foil for flat and pitched roofs, as well as for single-ply roof constructions, especially for trapezoidal profile roofs.

This composite material meets the requirements according to DIN 18234 monolithic construction “Fire safety of large roofs for buildings”.

Designation Fire performance Colour SD value Weight Roll width Roll length

vliepathermPAL 15 / 30*

DIN EN 13501-1Class E

silver > 1.500 m approx. 105 g / m2

1.50 m 100 m

Self-adhesive aluminium composite foil with a polymer bitumen coating, CE marking EN 13970

Diffusion tight vapour barrier foil for single-ply roof constructions, especially for trapezoidal profile roofs. Suitable for temporary use as makeshift sealing in accordance with the installation instructions.

**) This composite material meets the requirements according to DIN 18234 monolithic construction “Fire safety of large roofs for buildings”.

vliepatherm AL-SK *


vliepatherm AL-SK *) **)


silver > 1.500 m 250-300 g / m2

1.08 m 50 m

vliepatherm AL-SK 1.2

DIN EN 13501-1Klasse E

silver > 1.500 m 1200 g / m2 1.08 m 25 m

self-adhesive aluminium composite foil, CE marking EN 13984

Diffusion tight, self-adhesive vapour barrier foil for trapezoidal and flat roofs.

This composite material meets the requirements according to DIN 4108-7 and DIN 18234 structural fire protection of large roof areas ``Fire safety of large roofs for buildings“.

vliepatherm protect pro SK *


vliepatherm protect pro SK*


silver > 1.500 m 220 g / m2 1.50 m 50 m

5


6

Roofing Materials for Pitched RoofsRoofing and Building Materials

3-layer polypropylene nonwoven material with inner microporous film, CE marking DIN EN 13859-1.

Breathable roofing and wall membrane. Suitable for ventilated and non-ventilated pitched roof constructions.

Suitable for new constructions, renovations and temporary roofing.

vliepaspan without NSK *

Designation Fire performance Colour SD value Weight Roll width

Roll length

vliepaspan 135 without NSK*

DIN EN 13501-1 Class E

grey/natural

0.02 m 135 g/m2 1.50 m 50 m

vliepaspan 160 without NSK*


green/white

0.02 m 160 g/m2 1.50 m 50 m

vliepaspan with NSK * 3-layer polypropylene nonwoven material with inner microporous film and self-adhesive strips, CE marking DIN EN 13859-1.

Breathable roofing and wall membrane with a double-sided adhesive strip on each side.

Suitable for ventilated and non-ventilated pitched roof constructions.

Suitable for new constructions, renovations and temporary roofing.


Roll length

vliepaspan 135 with NSK


grey/natural

0.02 m 135 g/m2 1.50 m 50 m

vliepaspan 160 with NSK


grey/natural

0.02 m 160 g/m2 1.50 m 50 m

vliepaspan 180 with NSK*


green/natural

0.02 m 180 g/m2 1.50 m 50 m

3-layer polypropylene nonwoven material with inner microporous film and self-adhesive strips, CE marking DIN EN 13859-1.

Breathable roofing underlay for inverted roof. Suitable for new constructions, renovations and tem-porary roofing.

vliepaspan 120 UD


Roll length

vliepaspan 120 UD DIN EN 13501-1 Klasse E

grey/natural

0.025 m 120 g/m2 1.50 m 50 m


7

Roofing Materials for Pitched RoofsRoofing and Building Materials

Heat-reflecting vapour control layer (type A), CE marking EN 13984

Protects insulation materials against the penetration of moisture from inside the room.

This airtight material helps to reduce energy consumption and prevents convection.

Double-sided integrated self-adhesive strips make it easy to install and deliver a high level of protection, high tear resistance and dimensional stability.

Vapour control layer, CE marking EN 13984

Vapour control layer designed for use in roof, wall and interior construction with double-sided integral sealing tapes.

Can be installed on formwork, directly on the rafters and looped between the rafters.

Ideal for renovations and new constructions.

vliepavap 130 PP-AL with NSK*

vliepavap PP with NSK


Roll length

vliepavap 130 PP-AL with NSK*


beige/silver

25 m 123 g/m2 1.50 m 50 m


Roll length

vliepavap 100 PP with NSK


white 2 m 100 g/m2 1.50 m 50 m



grey/white

10 m 135 g/m2 1.50 m 50 m



opaque/orange

20 m 180 g/m2 1.50 m 50 m

Solvent-free, modified acrylic adhesive with high instant bonding

Sealing tape for LDPE and aluminium foil.

Fulfils requirements according to DIN 18234, cross section

Adhesive TechnologyRoofing and Building Materials

Solvent welding agent for welding vliepaspan Application: T 310 2S.

When using the additional brush bottle, the membrane is coated on both sides with the solvent welding agent in one process to guarantee optimal and effective welding.


Designation Form of delivery


6 tin cans of 1 l(disposable packaging) in carton



Solvent-free, self-adhesive and permanently elastic polyacrylate dispersion with a high resistance to ageing.

Highly effective, self-drying sealing agent for the professional realisation of permanent connections on standard vapour retarders and vapour barriers on solid building components, as well as for the airtight sealing of joints, overlaps on building components and joints in indoor areas according to DIN 4108/7.

After curing, vliepabond sealing agent guarantees a secure and long-lasting hold for the planned me-chanical stresses in the connection area.

Designation Colour Form of delivery


blue 20 cartridges (disposable container) each containing 310 ml in a carton60 cartons/pallet

9

Moisture-curing, solvent-free, easy-flow 1-component polyurethane adhesive.

Suitable for bonding thermal insulating materials on flat roofs.

Meets the strict standards of the wind load test in accordance with ETAG006 from the Institute for Industrial Aerodynamics at the FH Aachen.

Easy-to-use thanks to its 1-component system based on polyurethane.

Curing occurs due to the reaction with water and/or air humidity.

Broad adhesion spectrum, permanently elastic, weather-resistant, solvent-free, odourless.

vliepapur roof adhesiveDesignation Colour Form of delivery

vliepapur roof adhesive brown 84 tin cans of 6.5 kg(disposable container) on pallet: 546 kg

Adhesive tape VKB Self-adhesive packaging tape with solvent-free acrylate adhesive with a good resistance to ageing, adhesive on one side, individually printed.

Other dimensions and carrier types available on request.

Designation Colour Weight Roll width Roll length

Adhesive tape PP white/brown/transparent

30 µm 50 mm 66 m

Adhesive TechnologyRoofing and Building Materials

Self-adhesive sealing tape with high tear resistance and UV stability. Solvent-free polyacrylate adhesive on a PP nonwoven carrier with extra high surface adhesion and high tear resistance, single-sided adhesive.

Airtight bonding and sealing of underlay membranes with a slightly rough surface in the area of the roof ridge, with sufficient instant bonding guaranteed.

Solvent-free polyacrylate adhesive on a nonwoven carrier with extra high surface adhesion, single-sided adhesive.

Airtight bonding and sealing of overlaps, connections and penetrations through flexible vapour barriers and underlay membranes with slightly rough surfaces in outdoor areas in accordance with DIN 4108-7.

Ridge sealing tape 135

Seam tape NSKB 1S

Nail sealing tape NDB

Designation Colour Thickness Roll width Roll length

NSKB 1S grey 0.55-0.60 mm 60 mm 25 m

Self-adhesive, closed-cell PE foam adhesive tape with a double-sided, solvent-free and ageing-resistant polyacrylate adhesive.

Universal PE foam sealing tape for permanently rainproof sealing, for use when mounting the battens with nail or screw penetrations, on roof and wall membranes.


NDB anthracite 3.00-4.00 mm 50-60 mm 20-30 m

Self-adhesive, closed-cell PE foam adhesive tape based on hot-melt synthetic rubber with a very strong initial adhesion, single-sided adhesive.

Universal PE foam sealing tape for permanently rainproof sealing, for use when mounting the battens with nail or screw penetrations, on roof and wall membranes. .

Nail sealing tape NDB 1S


NDB 1S anthracite 3.00-4.00 mm 50-60 mm 20-30 m


Ridge sealing tape 135 grey 0.18-0.20 mm customer-specific e.g. 250 mm wide

customer-specific e.g. 15 m long


10


11

Building MaterialsRoofing and Building Materials

Fibre glass material made out of textile glass fibres with/without fibre reinforcement

Separating layer/underlay for installation beneath mastic asphalt.

Fibre glass material GUA 60 Designation Colour Weight Roll width Roll length

GUA 60 white 60 g / m2 1.00 m 200 m

Fibre glass material GL-S 75 AV / A2

Wool felt board WFP

Fibre glass material made out of textile glass fibres

Acoustic and trickle protection for roofs and facades when using glass fibre and stone wool insulating materials.

Absorbs vibrations.


GL-S 75 AV / A2 DIN 4102-1Class A2

black 75 g / m2 1.30 m 100 m

Roofing felt board based on recycled paper with 40% rag material

Separating/intermediate layer for installation beneath mastic asphalt.

Protective covers for the painting and coating trade.

Underlay for parquet flooring.

Protects floor coverings against dirt, scratches, etc.

Designation Colour Weight Roll width Roll length

WFP 250 grey 250 g / m2 1.00 m 100 m

WFP 330 grey 330 g / m2 1.00 m 50 m

WFP 400 grey 400 g / m2 1.00 m 50 m

WFP 500 grey 500 g / m2 1.00 m 50 m

[email protected]

Nonwoven Materials, Paper and Plastic Finishing

Solutions for the construction, paper and packaging industries

Postbox 2001 · D-41376 BrüggenHeidhausen 81 · D-41379 Brüggen

T +49 (0) 21 57 8 79 77 - 0F +49 (0) 21 57 8 79 77 - 99 Roofing Layers for Insulation

MaterialsPrinting and Finishing Roofing and Building Materials03

/18

ROOFING AND BUILDING MATERIALS - vliepa.com · 10 m 135 g/m2 1.50 m 50 m vliepavap 180 PP with NSK...

Documents

Transcript of ROOFING AND BUILDING MATERIALS - vliepa.com · 10 m 135 g/m2 1.50 m 50 m vliepavap 180 PP with NSK...