Role of detectors • Photomultiplier tubes (photoemission ...

38
Lecture 9 Outline Role of detectors Photomultiplier tubes (photoemission) Modulation transfer function Photoconductive detector physics Detector architecture

Transcript of Role of detectors • Photomultiplier tubes (photoemission ...


Lecture 9 Outline

• Role of detectors• Photomultiplier tubes (photoemission)• Modulation transfer function• Photoconductive detector physics• Detector architecture


Where detectors are used in science & technology

Scientific: ImagingSpectroscopy

Technical: Acquisition / guidingActive opticsAdaptive opticsInterferometry(fringe & tip/tilt tracking)


Photomultiplier tube

• Electron multiplier


Photomultiplier tube


Optical and Infrared Astronomy(0.3 to 25 μm)

Telescope to collect and focus light

Instrument

Instrument to measure light

Two basic parts

Telescope to collect and focus light

Instrument to measure light


Instrument goal is to measure a 3-D data cube

But array detectors are 2-dimensional !• Our detectors are• Cannot measure color, only intensity

So the optics of the instrument are used to map a portion of the 3-D data cube on to the 2-D detector

BLACK & WHITEWHITE

Wave

lengt

h

Y

X

Intensity


Detector zoology

X-ray Visible NIR MIR

λ [μm]

Silicon CCD & CMOS0.3 1.10.9 2.5 5 20

HgCdTeInSb

STJ

0.1

Si:As

We will concentrate on 2-D focal plane arrays. • Optical – silicon-based (CCD, CMOS)• Infrared – IR material plus silicon CMOS multiplexer


The Ideal Detector

• Detect 100% of photons

• Each photon detected as adelta function

• Large number of pixels

• Time tag for each photon

• Measure photon wavelength

• Measure photon polarization

Up to 99% quantum efficiency

One electron for each photon

1 billion pixels by 2008

No - framing detectors

No – defined by filter (except STJs)

No – defined by filter

Plus READOUT NOISE and other “features”


5 basic steps of optical/IR photon detection1. Get light into the detector

Anti-reflection coatings2. Charge generation

Popular materials: Silicon, HgCdTe, InSb3. Charge collection

Electrical fields within the materialcollect photoelectrons into pixels.

4. Charge transferIf CMOS, no charge transfer required.For CCD, move photoelectrons to the edgewhere amplifiers are located.

5. Charge amplification & digitizationAmplification process is noisy. In generalCCDs have lowest noise, CMOSdetectors have higher noise.

Quantum

Efficiency

Point

Spread

Function

Sens

itvi

ty


Step 1: Get light into the detector

Good opticsNo lost light

No stray lightAnti-reflection coatings

• Anti-reflection coatings will be discussed in next lecture.


Modulation Transfer Function


Modulation Transfer Function

• Relation to point-spread function (PSF)


MTF

• Effects of processing


Step 2: Charge Generation

Silicon

Similar physics for IR materials


Detector Current Responsivity

S = photocurrent /incident power

S = QE λqG/hc

where G = τ / T τ = carrier lifetimeT = transit time

(for photomultipliers, the photo-conductive gain G can be >>1 ! )

Rieke 2.13


Minimum Noise Equivalent Power

Detector internal Johnson noise limited:< IJ >2 = 4kT Δf / R

NEP > IJ / S = [2hc/QEλqG](kT/R)1/2 W/Hz1/2

but most applications are not internal noise limited…


Noise Equivalent Power

Include shot noise from input photons(so-called generation-recombination noise):

NEPG-R > IJ / S = [2hc/λ](φ/QE)1/2 W/Hz1/2

sum:

NEP2 = NEP2G-R + NEP2

J + NEP21/f


Step 2: Charge GenerationPhoton Detection

Conduction Band

Valence BandEg

For an electron to be excited from theconduction band to the valence band

hν > Eg

h = Planck constant (6.6310-34 Joule•sec)ν = frequency of light (Hz) = λ/c

Eg = energy gap of material (electron-volts)

Material Name Symbol Eg (eV) λc (μm)

Silicon Si 1.12 1.1Mer-Cad-Tel HgCdTe 1.00 – 0.09 1.24 – 14

Indium Antimonide InSb 0.23 5.9Arsenic doped Silicon Si:As 0.05 24

λc = 1.238 / Eg (eV)


Step 2: Charge GenerationPhoton Detection

Conduction Band

Valence BandEg

For an electron to be excited from theconduction band to the valence band

hν > Eg

h = Planck constant (6.6310-34 Joule•sec)ν = frequency of light (Hz) = λ/c

Eg = energy gap of material (electron-volts)

Material Name Symbol Eg (eV) λc (μm) Operating Temp. (K)

Silicon Si 1.12 1.1 163 - 300Mer-Cad-Tel HgCdTe 1.00 – 0.09 1.24 – 14 20 - 80

Indium Antimonide InSb 0.23 5.9 30Arsenic doped Silicon Si:As 0.05 24 4

λc = 1.238 / Eg (eV)


Step 3: Charge Collection

• Intensity image is generated by collecting photoelectrons generated in 3-D volume into 2-D array of pixels.

• Optical and IR focal plane arrays both collect charges via electric fields.

• In the z-direction, use an electric field to “sweep”charge toward pixel collection nodes.

2-D arrayof pixelsy

zx


Photovoltaic Detector Potential Well

Silicon CCD & HgCdTe and InSb are photovoltaic detectors. They use a pn junction to generate E-field in the z-direction of each pixel. This electric field separates the electron-hole pairs generated by a photon.

Note:Can collect eitherelectrons or holes


Step 3: Charge Collection• Optical and IR focal plane arrays are different for

charge collection in the x and y dimensions.• IR – collect charge at each pixel and have amplifiers

and readout multiplexer• CCD – collect charge in array of pixels. At end of

frame, move charge to edge of array where one (or more) amplifier (s) read out the pixels.

2-D arrayof pixelsy

zx


For silicon

n – region from phosphorous doping

p – region fromboron doping

n-channel CCDcollects electrons

p-channel CCDcollect holes


Steps 4 and 5: Charge transfer and amplification

• Transfer different for CCDs and IR detectors (will cover next time).

• Both use MOSFETs (metal-oxide-semiconductor field effect transistors) to amplify the signal.


CCD – Serial register and amplifier


100 micron diameter human hair


MOSFET

Gate

Source

Drain


READOUT

MOSFETamplifier


Amplifier Responsivity

Q = CV

V = Q / C

Capacitance of MOSFET = 10-13 F (100 fF)Responsivity of amplifier = 1.6 μV / e-

More recent amplifier designs have higher responsivity, 5 – 10 μV/e-, which give lower noise, but less dynamic range.