Rohrwerk Maxhütte - German Pavilion · Rohrwerk Maxhütte Seamless Steel Tubes Brief Company...
12
Rohrwerk Maxhütte Seamless Steel Tubes Brief Company Information Production Programme High quality tubes made in Germany
Transcript of Rohrwerk Maxhütte - German Pavilion · Rohrwerk Maxhütte Seamless Steel Tubes Brief Company...
Rohrwerk Maxhütte
Seamless Steel TubesBrief Company InformationProduction Programme
High quality tubes made in Germany
Our corporate guiding principlesSpotlight on customer satisfaction and employee motivation
Rohrwerk Maxhütte: Was wir wollen ...
Corporate guidingprinciples
MH-ROHR stands für seamless high-quality tubes from Bavaria, produced at competitive prices and delivered exactlyon time to established customers around the world.
Our guiding principle is an adequate return on capital coupled with highly-satisfied customers and employees.
Our dealings with each other are marked by openness and fairness. Maximum employee motivation is our declared goal.
The highest product and process quality, as well as sustained cost-effectiveness are attained by continous improvement -at all levels and in all areas. At the sametime, we focus on optimal work safety and appropriate environmental protection.
Rohrwerk Maxhütte:We are committed to continuing the long-standing tradition of Sulzbach-Rosenberg steel !
Sulzbach-Rosenberg, 25.09.2001
• Founded in 1954 as part of the Maxhütte Group• Shareholders: 100% PARN Beteiligungs-Verwaltungs-GmbH• Highest product-quality• Best customer services• Individual tube treatment upon customers demand (in own workshops - OAZ)
• Flexibility in all departments• Short delivery time • Observance of delivery-dates
Rohrwerk Maxhütte – Fit for the future...
Seamless steel tubes for global demandRohrwerk Maxhütte - Products and markets
Our Products
Seamless Steel Tubes• Black threaded tubes• Galvanized threaded tubes• Water-boiler tubes• Boiler tubes, Quality Grade I• Boiler tubes, Quality Grade III• Ball bearing tubes
Steel Grades• St35.8, TTSt35, St37, St52• 16Mo3, 13CrMo44, 10CrMo910• 100Cr6• P / T-Grades• Other steel grades upon customer‘s request
Manufacturing Ranges• External diameter 21.3 mm – 139.7 mm• Wall thickness 2.3 – 11.0 mm
Our Markets
• Mechanical engineering• Steel construction• Construction/plumbing trade• Boiler and plant construction• Ball bearing industry• Other
Products and Grades
Type of tube Delivery specification 1) Steel grade (analog EN / DIN-Standard)
Black seamless threaded tubes or hot galvanized tubes
DIN 2440/2441/2442 BS1387 NFA 49115 galvanized in accordance with DIN EN 10240-A1and DVGW directives NW 15-80 (1/2“-3“) DIN EN 10255
St33 / St37.0 / TU 34-1
Seamless carbon, low-alloy and low-temperature tubes
Tubes for general use ASTM A53 A120 NFA 49112
Tubes for special requirementsTubes for very demanding requirements EN 10216-1 EN 10224 DIN 1629 / 1630 P235 / St37.0 / St37.4 P265 / St44.0 / St44.4
P195 St52.0 St52.4
Tubes made of general structural steel for steel construction EN 10210-1 DIN 17121 S235JRH / St37-2 / St37-3 S275J0H / J2H / St44-2
/ St44-3 S355J0H / J2H / St52-3
Tubes made of fine grained structural steel for steel construction EN 10210-1 DIN 17124
StE / TStE / EStES275NH / NLH / -255 / 285 S355NH / NLH / -355 S420NH / NLH S460NH / NLH
Engineering tubes and mechanical tubing
EN 10083-1/-2/-3 DIN 17200 DIN 17210 DIN 2391
Case-hardening and heat-treatable steelAdditional steel grades available upon request
Tubes for long-distance pipelinesfor combustible liquids and gases
EN 10208 -1/-2 DIN 17172 / TRbF301 DIN 2470 -1/-2
StE 210.7 L245NB / 240.7 L290NB / 290.7 320.7 L360NB / 360.7 385.7 415.7
Low-temperature steel tubes EN 10216-4 DIN 17173 ASTM A333 ASTM A334 TTSt35 TTSt45 test category 1+2 Gr. 1 / Gr. 6
Tubes of fine grained structural steelfor special requirements EN 10216-3 DIN 17179
StE / WStE / TStE / EStE-255 P275NL1 / NL2 / 285 P355NH / NL1 / NL2 /355 P460NH / NL1 / NL2
Tubes for the mineral oil and natural gas industry API Spec 5L PSL-1 A25 / A/B / X42 / X52
High-temperature steel tubes
Boiler and superheater tubesEN 10216-2 DIN 17175 grades I and III NFA 49212 NFA 49213 ASTM A106 A192 A209 A210 A213 A335 BS 3059-1/-2
P235GH / St35.8 P265GH / St45.8 17Mn4 16Mo3 13CrMo4-5 / 13CrMo44 10CrMo9-10,T/P11 T/P22 P195GH
Cold-finished quality tubes
Ball bearing tubes DIN 17230 ISO 683-17 100Cr6
1) additional national and international delivery specifications upon request
Delivery programme
2,3 2,6 2,9 3,2 3,6 4,0 4,5 5,0 5,6 6,3 7,1 8,0 8,8 10,0 11,0 12,0 12,5 13,021,30 a. P.25,00 a. P.26,90 2,3030,00 2,6031,80 2,6033,70 2,6038,00 2,6042,40 2,6044,50 2,6048,30 2,6051,00 2,6057,00 2,9060,30 2,9063,50 2,9070,00 2,9076,10 2,9082,50 3,2088,90 3,20101,60 3,60108,00 3,60114,30 3,60121,00 4,00127,00 4,00133,00 4,00139,70 4,00
upgrade 2008, grade II
Standard w all (mm)External
diameter (mm)w allt hickness (mm)
Water boiler tubes, boiler tubes grade I
Delivery programme
Delivery programme
Outer Diameter
Thickness mm
Weight-class Schedule A106 Gr. A/B A53
Gr. A/B / X42 A106 Gr. C A333 Gr. 6X52 A335 Gr. P11 A335 Gr. P22
1/2 21,3 2,77 STD 40 X w X w X w3/4 26,7 2,87 STD 40 X w X w X w X c X c3/4 26,7 3,91 XS 80 X w X w X w X c X c
1 33,4 3,38 STD 40 X w X w X w X c X c1 33,4 4,55 XS 80 X w X w X w X c X c
1 1/4 42,2 3,56 STD 40 X w X w X w X w X w1 1/4 42,2 4,85 XS 80 X w X w X w X w X w1 1/4 42,2 6,35 160 X w X w X w X w X c1 1/2 48,3 3,68 STD 40 X w X w X w X w X w1 1/2 48,3 5,08 XS 80 X w X w X w X w X w1 1/2 48,3 7,14 160 X c X c X c X c X c
2 60,3 3,91 STD 40 X w X w X w X w X w2 60,3 5,54 XS 80 X w X w X w X w X w2 60,3 8,74 160 X w X w X w X w X w
2 1/2 73,0 5,16 STD 40 X w X w X w X w X w2 1/2 73,0 7,01 XS 80 X w X w X w X w X w2 1/2 73,0 9,52 160 X w X w X w X w X w
3 88,9 3,96 20 X w X w X w X w X w3 88,9 5,49 STD 40 X w X w X w X w X w3 88,9 7,62 XS 80 X w X w X w X w X w3 88,9 11,13 160 X w X w X w X w X w
3 1/2 101,6 5,74 STD 40 X w X w X w X w X w3 1/2 101,6 8,08 XS 80 X w X w X w X w X w
4 114,3 6,02 STD 40 X w X w X w X w X w4 114,3 8,56 XS 80 X w X w X w X w X w
w = hot rolled c = cold drawn
Dimension Schedule ASTM / ASME / API 5L
Sizes and materials which are not mentioned - on request.
Inch
Delivery programme
Ultrasonic testing
Microscopy
Charpy testHardness test
Testing laboratory for metallic materialsQuality assurance by modern inspection technique and competent employees
Sample preparation
Services in the framework of technical consultation and investigations. Mechanicaland technological examinations / Non-destructive testing / Microscopic and analytic examinations.
• DIN / ISO 9001 (TÜV / CERT)
• AD-W 0/TRD 100 (TÜV South Germany)
• DGRL 97/23/EG (TÜV South Germany)
• ÜHP / DVGW (LGA Bavaria)
• ASTM / ASME; API
• Lloyds Register EMEA
• Det Norske Veritas
• Germanischer Lloyd
• Others
Certifications / Licences
Rohrwerk Maxhütte GmbH
Germany
Postfach 13 58
D - 92231 Sulzbach-Rosenberg
Rosenbachstraße 11
D - 92237 Sulzbach-Rosenberg
phone (+49)-9661-814-0
email [email protected]
fax (+49)-9661-814-419
www.rohrwerk-maxhuette.com
Rohrwerk MaxhütteCompetence – Quality - Reliability
Your reliable team
For over 50 years
1954
2006
Edi
tion
2008
