Rixson Price Book November 2014

8/11/2019 Rixson Price Book November 2014

1/140

List price effective November 1, 2014

2014 Price Book

01.TOC.Nov2014:RixsonPriceBook_Front.qxd 9/2/14 1:28 PM Page 1


2/140


Tools and RulesService Center Business Hours . . . . . . . . . . . . . . .3Holiday Schedule . . . . . . . . . . . . . . . . . . . . . . . . . .3Ordering Protocol . . . . . . . . . . . . . . . . . . . . . . . . . .3Product Changes . . . . . . . . . . . . . . . . . . . . . . . . . . .4Trademark Use Policy . . . . . . . . . . . . . . . . . . . . . . .5E-Business . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Fax Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Terms and Conditions . . . . . . . . . . . . . . . . . . . . . . . . .9

Finish Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Heavy Duty Floor Closers . . . . . . . . . . . . . . . . . . . . .12Offset Hung

27, 127, 427, 327, L27, Q27, HM27, 20Single Acting Center Hung

28, H28, 328, 428, EH28Double Acting Center Hung

30, 40, H40

Shallow Depth Floor Closers . . . . . . . . . . . . . . . . . .23Offset Hung

51, 53, Q51, HM51Single Acting Center Hung

50, 5040Double Acting Center Hung

5020

Specialty Closers . . . . . . . . . . . . . . . . . . . . . . . . . . . .31Duo Chek Double Acting Floor Closers

10, 12, 15, 16Gate Closers

354, 355, 356, 357, 359Security Closers

SEC27Exterior Gate Closers

1350, 1351

Door Control Accessories . . . . . . . . . . . . . . . . . . . . .35CasterSpecial Cement CasesCover Pans

Applied StopInstallation Tools

Overhead Concealed Closers . . . . . . . . . . . . . . . . . .37Commodity Grade 608 Series

Architectural Grade 700 & 800 Series

Pivots and Pivot Sets . . . . . . . . . . . . . . . . . . . . . . . . .45Offset Pivot Sets

117-1/4, 117, 173, 147, L147, 117-1/2, L117Intermediate PivotsPocket PivotsElectrified Pocket PivotsElectrified Intermediate Pivots

Center Hung Pivot Sets127-3/4, 128-3/4, 370, 117-3/4, H117-3/4,178, 176Center Hung Top PivotsElectrified Center Hung Top Pivots

Checkmate Stops & Holders . . . . . . . . . . . . . . . . . .55Thresholds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

Electromagnetic Door Holder/Releases . . . . . . . . .65

Electrified Closer/Holders . . . . . . . . . . . . . . . . . . . . .67Smok-Chek VSmok-Chek VICheckmate 99

Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Table of Contents

CONTENTS PAGE CONTENTS PAGE

2

Rixson and Design , Uni-Chek, Smok-Chek, Duo-Chek and Checkmate are registered trademarks of Yale Security Inc. Other products' brand names may be trademarks or registered trademarks of their respectiveowners and are mentioned for reference purposes only. These materials are protected under U.S. copyright laws. All contents current at time of publication. Copyright 2002-2014 Yale Security Inc.All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.



3/140

3

Tools and Rules

Service Center Business Hours


ORDERING PROTOCOL

2014 Holiday Schedule*

Please submit Quick Ship Program Items and Factory Items on separate purchase orders.

If you have a Quote, please include the quote number on the purchase order. Orders without this information may be delayed.

Check all acknowledgements for accuracy.

ASSA ABLOY Door Security Solutions Customer Service Center, Monroe, NC, and Rixson TPS,will be CLOSED on the following holidays:

November 27, 28December 24, 25, 26

ASSA ABLOY Door Security Solutions Customer Service Monroe8:00 a.m. 4:30 p.m. (Eastern)1902 Airport RoadMonroe, NC 28110Telephone Number: (800) 457-5670Fax Number: (800) 221-0489

ASSA ABLOY Door Security Solutions Customer Service West4226 Transport St.Ventura, CA 93003Tel: 800-283-9988Fax: 800-283-4050

Rixson TPS8:00 a.m. 4:30 p.m. (Eastern)Telephone Number: (866) 474-9766



4/140

4 List price effective November 1, 2014

Tools and Rules

Product Additions/Deletions for November, 2014 Price Book

Visit our website at www.rixson.com for current product information.



5/140

5

Tools and Rules


Trademark Use Policy: ASSA ABLOY Americas

The following policy (Policy) of ASSA ABLOY Americas (ASSA ABLOY), and all of its affiliated group companies (collectively,the Group Companies), applies to the use of certain intellectual property of all such Group Companies, including all trademarks,names, logos, product images, and related information (the ASSA ABLOY Marks). ASSA ABLOY Marks are proprietary andcritical to the success of ASSA ABLOY and the Group Companies, and may only be used in strict compliance with this Policy.

This Policy covers any person or entity reselling any product of any Group Company with the consent of such Group Company(each, an Approved Reseller). Each Approved Reseller has a non-exclusive right to use certain of the ASSA ABLOY Marksrelating to any of the Group Companies for which it is an Approved Reseller, subject to the following conditions:

(1) Approved Resellers use of ASSA ABLOY Marks must be truthful, fair, and not misleading;

(2) Approved Resellers advertising must clearly indicate that it is advertising of the Approved Reseller, and is not advertising ofASSA ABLOY;

(3) Approved Reseller may not use any ASSA ABLOY Marks as part of or in connection with a domain name;

(4) Approved Resellers advertising must not imply or suggest an association between the Approved Reseller and ASSA ABLOYother than that of buyer and seller;

(5) Approved Resellers use of ASSA ABLOY Marks must be a positive representation of ASSA ABLOY, the Group Companies,

and their products;(6) Approved Resellers trade name must be more predominant on Approved Resellers advertising than the ASSA ABLOY Marks;

(7) Approved Resellers use of ASSA ABLOY Marks must include the trademark symbol or T M, as appropriate, along with thefollowing trademark legend printed in legible text on the Web page or document containing ASSA ABLOY Marks: [describeASSA ABLOY Marks] are trademarks or registered trademarks of ASSA ABLOY, Inc. or one of its affiliates in the UnitedStates and other countries.;

(8) Approved Reseller must not make modifications of any ASSA ABLOY Marks; and

(9) Approved Reseller may use only ASSA ABLOY Marks associated with the Group Companies for which it is an ApprovedReseller (e.g., an Approved Reseller that sells Group Company X products but not Group Company Y products may useGroup Company X trademarks in connection with its sale of Group Company X products, but may not use Group CompanyY trademarks).

ASSA ABLOY reserves the right to review Approved Resellers usage of ASSA ABLOY Marks at any time and may:

(a) require changes to the use of ASSA ABLOY Marks at any time in its sole discretion, which changes must be implementedwithin 30 days of written notice to Approved Reseller;

(b) condition the use of ASSA ABLOY Marks on ASSA ABLOYs prior approval of such use, which approval may be withheld inits sole discretion;

(c) revoke permission to use ASSA ABLOY Marks at any time for any or no reason upon 30 days prior written notice to ApprovedReseller; and

(d) revoke permission to use ASSA ABLOY Marks immediately upon notice to Approved Reseller in the event Approved Reseller isin violation of this Policy, or of any other agreement with ASSA ABLOY or any Group Company. Approved Resellers right to useASSA ABLOY Marks in no way conveys to Approved Reseller any proprietary or economic interest in any ASSA ABLOY Marks.

Use of ASSA ABLOY Marks in violation of this Policy may result in severe civil and criminal liabilities. ASSA ABLOY will vigorouslyenforce this Policy by seeking all appropriate legal remedies, including, but not limited to, pecuniary damages and injunctive relief.

If there are any questions on this policy, please contact Linda Dean at [email protected] or 203-498-5596



6/140


Tools and Rules

Rixson's website at www.rixson.com is the place to go for all your Rixson product information needs. Easy-to-navigatemenus and intuitive icons allow simple and fast access to the latest on new products, as well as the most up-to-datecatalogs, templates and installation instructions.

Another great benefit of the Rixson website is the ability to become an eBusiness member. Access gives you additionalinformation for Rixson account customers only.

Visit www.rixson.com to sign up for ASSA ABLOY Door Security Solutions eBusiness access.

ASSA ABLOY Door Security Solutions Security Consultants provides sales, marketing and supportfor R IXSON.

To sign up for eBusiness, follow the simple instructions listed below. Register today and startenjoying the many benefits!

eBusiness offers anytime access to:

Order Status Order Check by P.O. Stock Status Check Cross Reference Guide Newsletters Contact Webmaster Extended Literature (Price Books, Order Forms) Fax Program Sign Up Fax Order Acknowledgement Fax Invoice

How to sign up for eBusiness access:

Step 1: Visit our website at www.rixson.comStep 2: Double-click eBusiness icon (top middle)Step 3: Complete ASSA ABLOY Door Security Solutions eBusiness sign-up form

ASSA ABLOY Door Security Solutions Website and eBusiness



7/140

7

Tools and Rules


Would you like to receive your acknowledgements and invoices quickly and efficiently?

If so, ASSA ABLOY Door Security Solutions offers the Order Acknowledgement and Invoice FaxProgram. Please see the simple steps below to get signed up today!

Requirement: Valid eBusiness User ID and Password. (If you do not have an eBusiness User ID andPassword, please refer to eBusiness Sign-up Section included in this Price Book.)

Step 1: Log into eBusiness .

Step 2: Double-click on Sign Up for ASSA ABLOY Door Security Solutions Fax Program Now!

Step 3: Fill in appropriate information.Step 4: Click on Sign up for Fax Program!

ASSA ABLOY Door Security Solutions Fax Program



8/140


Limited Warranty

Yale Security Inc (the Company) warrants that its products sold under the Rixson trade name in the UnitedStates of America are free from defects in workmanship and materials under normal use and service.This warranty does not cover defects or damage arising from improper installation, lack of or impropermaintenance, improper storage, shipping and handling, ordinary wear and tear, misuse, abuse, accident,unauthorized service, use with unauthorized non-Rixson products or parts, or the effects of erosion, or corrosion onthe finish. This warranty is void if any modification is made to the product regardless of whether the modificationcauses or contributes to the alleged defect. All modifications are made at the risk of the party making themodification.

The only liability of the Company in tort or contract whether under this warranty or otherwise shall be limited to therepair or replacement of any product or component part which shall prove defective as covered by this warranty.

The warranty period after delivery to the original purchaser in all cases is as follows:

Rixson door controls:Series 27/28, 30/40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 yearsElectrified Closer/Holders and Electromagnetic Holder/Releases. . . . . . . . . . 2 years

All other Rixson products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 years

The Company will not pay for the cost of repair performed other than in accordance with this warranty. Writtennotice of a product or component part believed to be defective as covered by this warranty should be sent toYale Security Inc., 1902 Airport Road, Monroe, North Carolina 28110, and should include your name and address,an identification of the product or component part and a brief description of the defect. Upon receipt of suchnotice, the Company will inform you where to ship such product or component part, shipping charges prepaid, forexamination and, in the event such examination reveals a defect covered by this warranty, the product will berepaired or replaced.

THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. TO THE EXTENT PERMITTED BY LAW, ALLIMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THIS WARRANTY. YALE SECURITY INC. SHALL NOTBE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.

SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THEEXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OREXCLUSIONS MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.



9/140


10/140


Terms and Conditions

or cancelled. All change requests for goods, other than for the reasonsstated above, must be submitted in writing to Customer Service withintwo (2) business days of receipt of acknowledgment of the order.

ADD-ON ORDERS TO QUOTE Any new order requesting special pricing to match an existing quotenumber, which has already been ordered, will be accepted up to sixty(60) days after the acknowledgement of the original order. All add-onorders must reference the original factory order number and thecorresponding quote number to receive the quoted pricing discount.

Add-on orders for stock will not be accepted.PACKAGINGMany items are defined as to Case Lot Packaging or Minimum Order.The Case Lot policy does not apply to hardware to be used on a specifichardware project.DELIVERY Orders will be acknowledged and given a scheduled delivery date basedon estimated manufacturing lead times. Complete information is requiredto process all orders. Orders with insufficient information for processing(i.e. door sizes, handing, etc.) may be subject to extended lead timeswhich are relative to the time required in obtaining the necessaryinformation for order processing. Manufacturing lead time will beginonce all information is received to process an order. Rixson will usereasonable efforts to deliver products as estimated, but makes noguarantees as to delivery dates. Rixson will not be liable for backcharges incurred based on availability of product or as a result of delaysin delivery caused by insufficient information required to process anorder. Rixson will not be held responsible for delays in delivery causedby strikes, fires, floods or any other causes beyond our control, includingthe delivery of material to us. Under no circumstances shall Rixson beliable or accountable for consequential damages due to failure ofdelivery.CLAIMSIn the event of Company or Customer error, claims for shortages, pricingerrors and/or incorrectly filled orders must be submitted in writing toCustomer Service within thirty (30) days from receipt of material.

Any claims for shortages or damage by the Carrier must be made by theCustomer directly to the Carrier.INVOICE DEDUCTION

A Rixson Sales Representative or Customer Service Representative mustbe notified of any disputed invoices within sixty (60) days from the dateof invoice. Deductions should only be taken for the disputed amount andthe balance of the invoice is due and payable within standard payment terms.RETURNED GOODSIt is the policy of Rixson to not accept returns of any materials that arecorrectly furnished as per the Distributors Purchase Order. Return ofproduct due to customer order error or accommodation must be pre-arranged with Rixson and approved in writing by Sales Management. Allproducts returned as Goodwill must meet the following criteria to beconsidered a return:- Be in original, unmarked and undamaged cartons.- Be valued in excess of $250.00 net.- Shipped and invoiced within the previous 120 days.- Custom, non-cataloged goods, or RIXSON Quick Ship

product is not returnable. A MINIMUM restocking fee of 45% will be charged. Upon receipt andverification by Rixson that the returned merchandise meets the foregoingconditions, a credit will be issued for the original invoice amount less theMINIMUM 45% restocking fee. Defective goods and Goodwillproducts that meet the foregoing criteria may be returned by fulfilling thefollowing conditions:- Send an RGA request in writing to the Rixson Sales Representative

serving the Purchasers area.

- Ensure the RGA labels that are sent to Purchaser by Rixson are visibleon return goods shipment.

- Ensure that the RGA number appears on the return shipment labeland is legible.

- Return the authorized merchandise within sixty (60) days from thedate of RGA issuance date.

- Return shipments must be freight prepaid to the location specified onthe RGA. Rixson is not liable for damages to product during shipping.

No credit may be taken or issued prior to RGA approval and receiptof product.

All defective goods within the terms of our limited warranty may bereturned for credit or replacement.TAXESPrices do not include any present or future Federal, State, or Localproperty, license, privilege, sales, use, excise, gross receipts or otherlike taxes or assessments, which may result from transactions or anyservices performed in connection herewith.GOVERNING LAW

The rights and obligations of the parties shall be governed by thelaws of the State of North Carolina, excluding any conflicts of lawprovisions. The United Nations Convention on Contracts for theInternational Sale of Goods shall not apply to this Agreement.LIMITED WARRANTY The Terms and Conditions outlined above are subject to RixsonsLimited Warranty, which is included in this Price List and incorporatedherein by reference.PRODUCT MODIFICATIONSRIXSON products are not designed or intended for aftermarketmodification. The warranty on RIXSON products becomes void ifthe product is modified in any way, regardless of whether themodification causes or contributes to any alleged defect. Warrantyvoiding modifications include, but are not limited to, third-partyelectrification of non-electric products and/or the installation of non-approved or non-Rixson components.If a RIXSON product is modified it no longer meets industry certification

and quality control standards applicable to the original product and isno longer a genuine RIXSON product. A modified product may not besold as a RIXSON product and no RIXSON trademarks or certificationmarks based on the original RIXSON product, such as U.L. or ANSI/BHMA marks, may appear anywhere on the modified product or on anypackaging, literature, or instructions sold with the modified product.

All original RIXSON packaging and literature that carries RIXSONtrademarks must be destroyed if the original RIXSON product ismodified. Portions of the product that carry a RIXSON trademark orcertification mark must be discarded and/or replaced by the partymaking the modification. U.L. and other certification testing and markingare also the responsibility of the party making modification. The use ofRIXSON trademarks on modified products constitutes trademarkinfringement.TECHNICAL INFORMATION AND ADVICE(a) All designs, data, and specifications provided by Company areproprietary and will not be disclosed or reused by Customer without the

prior written consent of Company; (b) Company assumes no obligationor liability for any advice given by Company, the results obtained, ordamages incurred, and all such advice is given and accepted atCustomers risk.



11/140

11List price effective November 1, 2014

Finish Symbol Designations

Blackened or hammered finishes are not available.

For any other finishes not listed, contact pricing department, 800-457-5670.* Patch fittings are available in these finishes only.

** BHMA numbers are assigned by base metals on which finish is being applied. For more information see

ANSI 156.18. Appearance should closely match old US numbers.

For finish availability see product "how to order" pages.

Finish Definitions

BHMA** US DESCRIPTION

600 / 674 P PRIME COAT

605* / 632 3 BRIGHT BRASS

606 / 633 4 SATIN BRASS

611 / 637 9 BRIGHT BRONZE

612 / 639 10 SATIN BRONZE

613 / 640 10B DARK BRONZE

613E / 640E 10BE DARK OXIDIZED SATIN BRONZE - EQUIVALENT

618 14 BRIGHT NICKEL

619 15 SATIN NICKEL

622 / 693 19 FLAT BLACK

625 / 651 26 BRIGHT CHROME

626 / 652 26D SATIN CHROME

629* 32 BRIGHT STAINLESS

630* 32D SATIN STAINLESS

689 SPRAYED ALUMINUM

690 SPRAYED DARK BRONZE

691 SPRAYED LIGHT BRONZE

696 SPRAYED BRASS



12/140

12

H e a v y

D u t y

F l o o r

C l o s e r s

Note that all fire rated openings must have a minimum of one intermediate pivot. See page 48Options on page 21


*Finish required, see page 22 N = Non-Hold open A = Automatic Hold Open S = Selective Hold Open Note: Buying program discount on Pivots applies when Pivots are ordered separately LAP = Less All Parts

Heavy Duty

Offset Hung Floor Closers

Heavy Weight/Duty 3/4" Offset

Model Complete CloserSpecify Model,Hand and Degree

LAPSpecify Model,Hand and Degree

Top PivotPkg

Bottom ArmPkg

Floor PlatePkg

CementCase Pkg

27N 27N LAP 180252050R* 274050R*

253000-PKG252050L* 274050L*

$1,416.00 $962.00 $186.00 $98.00 $88.00 $82.00

27S 27S LAP 180252050R* 274750R*

253000-PKG252050L* 274750L*

$1,530.00 $1,076.00 $186.00 $98.00 $88.00 $82.00

F27N 27N LAP F180252050R* 274050R*

253000-PKG252050L* 274050L*

$1,662.00 $962.00 $432.00 $98.00 $88.00 $82.00

27-180N 27-180N LAP 180252050R* 274050R*

253000-PKG252050L* 274050L*

$1,528.00 $1,074.00 $186.00 $98.00 $88.00 $82.00

27-180A 27-180A LAP 180252050R* 274050R*

253000-PKG252050L* 274050L*

$1,642.00 $1,188.00 $186.00 $98.00 $88.00 $82.00

F27-180N 27-180N LAP F180252050R* 274050R*

253000-PKG252050L* 274050L*

$1,774.00 $1,074.00 $432.00 $98.00 $88.00 $82.00

127N 28N LAP 180652050R* 274050R*

253000-PKG652050L* 274050L*

$1,480.00 $954.00 $186.00 $170.00 $88.00 $82.00

127S 28S LAP 180652050R* 274750R*

253000-PKG652050L* 274750L*

$1,594.00 $1,068.00 $186.00 $170.00 $88.00 $82.00

F127N 28N LAP F180652050R* 274050R*

253000-PKG652050L* 274050L*

$1,726.00 $954.00 $432.00 $170.00 $88.00 $82.00

02.OffsetHungFloorClosers.Nov2014:RixsonPriceBook_Front.qxd 9/2/14 1:29 PM Page 12


13/140

13


*Finish required, see page 22 N = Non-Hold open A = Automatic Hold Open S= Selective Hold Open Note: Buying program discount on Pivots applies when Pivots are ordered separately LAP = Less All Parts **Pricing for Offset 1-3/4 thick doors hung on standard 4-1/2 x 4-1/2 butts or 3/4 offset pivots. For all other hanging means ordoor thicknesses, consult factory. Prices will be affected and will not carry any buy program or quote discounting.


Heavy Duty


Fl o or Cl o s er s

Independently Hung (HANGING MEANS AFFECT PRICING AND MUST BE NOTED WHEN ORDERING)

Heavy Weight/Duty 3/4" Offset

27N x 1-1/2OS 27N LAP 180 x1-1/2OS252060R* 274050R*

253000-PKG252060L* 274050L*

$1,614.00 $962.00 $332.00 $150.00 $88.00 $82.00

27S x1-1/2OS 27S LAP

180 x1-1/2OS

252060R* 274750R*253000-PKG

252060L* 274750L*

$1,728.00 $1,076.00 $332.00 $150.00 $88.00 $82.00

F27N x 1-1/2OS 27N LAP F180 x1-1/2OS252060R* 274050R*

253000-PKG252060L* 274050L*

$1,980.00 $962.00 $698.00 $150.00 $88.00 $82.00

27 x180N x1-1/2OS 27 x 180N LAP

180 x1-1/2OS

252060R* 274050R*253000-PKG

252060L 274050L*

$1,726.00 $1,074.00 $332.00 $150.00 $88.00 $82.00

27-180A x1-1/2OS 27 x 180A LAP

180 x1-1/2OS

252060R*252060L*

274050R*274050L* 253000-pkg

$1,840.00 $1,188.00 $332.00 $150.00 $88.00 $82.00

F27-180N x1-1/2OS 27-180N LAP

F180 x1-1/2OS

252060R* 274050R*253000-PKG

252060L* 274050L*$2,092.00 $1,074.00 $698.00 $150.00 $88.00 $82.00

ModelComplete

Closer SpecifyModel, Hand andHanging Means

LAP SpecifyModel and

HandTop Pivot Pkg Bottom Arm Pkg Floor Plate Pkg CementCase Pkg

**F327N 327N LAP N/A 3252010-* 3274010R* 253000-PKG3274010L*

$1,492.00 $1,032.00 N/A $290.00 $88.00 $82.00

ModelComplete CloserSpecify Model,

Hand and Degree

LAP SpecifyModel,

Hand and Degree

Top PivotPkg

Bottom ArmPkg

Floor PlatePkg

CementCase Pkg

ModelComplete CloserSpecify Model,Hand and Degree

LAPSpecify Model,Hand and Degree

Top PivotPkg

Bottom ArmPkg

Floor PlatePkg

CementCase Pkg

427N 28N LAP 180 x 102652050R* 274050R*

253000-PKG652050L* 274050L*

$1,588.00 $954.00 $294.00 $170.00 $88.00 $82.00

427S 28S LAP 180 x 102652050R* 274750R*

253000-PKG652050L* 274750L*

$1,702.00 $1,068.00 $294.00 $170.00 $88.00 $82.00

Heavy Weight/Duty 1-1/2" Offset



14/140


15/140

15


Heavy Duty


*Finish required, see page 22 N=Non Hold Open A=Automatic Hold Open S=Selective Hold Open Note: Buying program discount on Pivots applies when Pivots are ordered separately LAP = Less All Parts


Fl o or Cl o s er s

Heavy Weight/Duty Quick Install

Heavy Weight/Duty HM Door and Frame Preps

Model

CompleteCloser

Specify Model,Hand and

Degree

LAP SpecifyModel, Handand Degree

Top Pivot Pkg Bottom ArmPkgFloor Plate

PkgCement Case

Pkg

IntermediatePivot *Cannot

be ordered lessintermediate

pivot

Q27N Q27N LAP 180 222050R* 294050R*

253000-PKG M19222050L* 294050L*

$1,891.00 $1,071.00 $186.00 $200.00 $88.00 $82.00 $264.00

Q27S Q27S LAP 180 222050R* 294750R*

253000-PKG M19222050L* 294750L*

$2,005.00 $1,185.00 $186.00 $200.00 $88.00 $82.00 $264.00

FQ27N Q27N LAP F180 222050R* 294050R*

253000-PKG FM19222050L* 294050L*

$2,441.00 $1,071.00 $432.00 $200.00 $88.00 $82.00 $568.00

QT27N Q27N LAP 180 222050R*

N/A 253000-PKG M19222050L*

$1,803.00 $1,071.00 $186.00 $200.00 $82.00 $264.00

QT27S Q27S LAP 180 222050R*

N/A 253000-PKG M19222050L*

$1,917.00 $1,185.00 $186.00 $200.00 $82.00 $264.00

FQT27N Q27N LAP F180 222050R*

N/A 253000-PKG FM19222050L*

$2,353.00 $1,071.00 $432.00 $200.00 $82.00 $568.00

ModelComplete

Closer SpecifyModel, Hand and

Degree


Hinge Pkg(3 per pkg) Bottom Arm Pkg Floor Plate Pkg

Cement CasePkg

HM27N & FHM27N 27N LAP 254545*-PK

222050R*HM 274050R*253000-PKG

222050L*HM 274050L*$1,857.00 $962.00 $525.00 $200.00 $88.00 $82.00

HM27S 27S LAP 254545*-PK 222050R*HM 274750R*

253000-PKG222050L*HM 274750L*

$1,971.00 $1,076.00 $525.00 $200.00 $88.00 $82.00

(3 Each)



16/140

16


Heavy Duty



Standard Weight/Duty 180 Swing

ModelComplete Closer

Specify Modeland Hand

LAP SpecifyModel and Hand TopPivot Pkg BottomArm Pkg FloorPlate Pkg Cement CasePkg

20N 20N LAP 180 252050R* 204050R* 203000252050L* 204050L*

$1,486.00 $1,032.00 $186.00 $98.00 $88.00 $82.00

F20N 20N LAP F180252050R* 204050R*

203000252050L* 204050L*

$1,732.00 $1,032.00 $432.00 $98.00 $88.00 $82.00

H e a v y D u t y

F l o o r C l o s e r s



17/140

Heavy Duty

Center Hung Floor Closers

17

*Finish required, see page 22 N = Non-Hold open A = Automatic Hold Open Note: Buying program discount on Pivots applies when Pivots are ordered separately LAP = Less All Parts

Options on page 21


Fl o or Cl o s er s

Heavy Weight/Duty Single Acting

ModelComplete CloserSpecify Model,

Hand andDegree


Top Pivot Pkg Bottom Arm Pkg Floor Plate Pkg CementCase Pkg

28N x 554 28N LAP 340 282554 284020R*

253000-PKG284020L*

$1,377.00 $954.00 $122.00 $125.00 $94.00 $82.00

28S x 554 28S LAP 340 282554 284720R*

253000-PKG284720L*

$1,491.00 $1,068.00 $122.00 $125.00 $94.00 $82.00

28N 28N LAP 340 282026-* 284020R*

253000-PKG284020L*

$1,377.00 $954.00 $122.00 $125.00 $94.00 $82.00

28S 28S LAP 340 282026-* 284720R*

253000-PKG284720L*

$1,491.00 $1,068.00 $122.00 $125.00 $94.00 $82.00



18/140

Heavy Duty


18

Options on page 21

*Finish required, see page 22 N = Non-Hold open A = Automatic Hold Open S = Selective Hold Open Note: Buying program discount on Pivots applies when Pivots are ordered separately LAP = Less All Parts

Extra Heavy Weight/Duty single acting


H e a v y D u t y


Model Complete CloserSpecify ModelHand and Degree

LAP SpecifyModel Handand Degree


H28N H28N LAP H340 262022284020R*

253001-PKG284020L*

$2,318.00 $1,109.00 $397.00 $544.00 $94.00 $174.00

H28S H28S LAP H340 262022284720R*

253001-PKG284720L*

$2,432.00 $1,223.00 $397.00 $544.00 $94.00 $174.00

H28N x 587 H28N LAP H340 262587284020R*

253001-PKG284020L*

$2,318.00 $1,109.00 $397.00 $544.00 $94.00 $174.00

H28S x 587 H28S LAP H340 262587284720R*

253001-PKG284720L*

$2,432.00 $1,223.00 $397.00 $544.00 $94.00 $174.00



19/140

Heavy Duty


19

Options on page 21

*Finish required, see page 22 N=Non Hold Open A=Automatic Hold Open S=Selective Hold Open Note: Buying program discount on Pivots applies when Pivots are ordered separately LAP = Less All Parts


Fl o or Cl o s er s

ModelComplete CloserSpecify Model,Hand and

Degree

LAP SpecifyModel, Hand and

DegreeTop Pivot Pkg Bottom Arm Pkg Floor Plate Pkg CementCase Pkg

328N 328N LAP N/A N/A 284020R*

253000-PKG284020L*

$1,130.00 $954.00 $94.00 $82.00

328S 328S LAP N/A N/A 284720R*

253000-PKG284720L*

$1,244.00 $1,068.00 $94.00 $82.00

428N 428N LAP 7494*PK 7495*PK 284020R*

253000-PKG284020L*

$1,662.00 $954.00 $261.00 $271.00 $94.00 $82.00

428S 428S LAP 7494*PK 7495*PK

284720R*

253000-PKG284720L*$1,776.00 $1,068.00 $261.00 $271.00 $94.00 $82.00

Patch Fittings/Single Acting

ModelSpecify Model,Hand, Degreeand Number

of Wires

LAP SpecifyModel, Hand,Degree and

Number of WiresTop Pivot Pkg Bottom Arm Pkg Floor Plate Pkg CementCase Pkg

EH28N EH28N LAP H340 262022 284020R*

253001-PKG284020L*

$2,533.00 $1,324.00 $397.00 $544.00 $94.00 $174.00

EH28S EH28S LAP H340 262022 284720R*

253001-PKG284720L*

$2,647.00 $1,438.00 $397.00 $544.00 $94.00 $174.00

EH28N x 587 EH28N LAP H340 262587284020R*

253001-PKG284020L*

$2,533.00 $1,324.00 $397.00 $544.00 $94.00 $174.00

EH28S x 587 EH28S LAP H340 262587 284720R*

253001-PKG284720L*

$2,647.00 $1,438.00 $397.00 $544.00 $94.00 $174.00

Thru-wire/Power Transfer Single Acting



20/140

20

Heavy Duty


Options on page 21


*Finish required, see page 22 N = Non-Hold open A = Automatic Hold Open Note: Buying program discount on Pivots applies when Pivots are ordered separately LAP = Less All Parts

Heavy Weight/Duty Double Acting

Extra Heavy Weight/Duty Double Acting

Model

Complete Closer

Specify Modeland Degree(If Hold Open)

LAP SpecifyModel & Degree(If Hold Open)

TopPivot Pkg BottomArm Pkg FloorPlate Pkg CementCase Pkg

30N 30N LAP 340 302026 304020-* 303000

$1,686.00 $1,213.00 $122.00 $124.00 $129.00 $98.00

30A 30A LAP 340 302026 304020-* 303000

$1,800.00 $1,327.00 $122.00 $124.00 $129.00 $98.00

40N 40N LAP 340 302026 404020-* 403000

$1,716.00 $1,236.00 $122.00 $124.00 $119.00 $115.00

40A 40A LAP 340 302026 404020-* 403000

$1,830.00 $1,350.00 $122.00 $124.00 $119.00 $115.00


Specify Modeland Degree

(If Hold Open)

LAP SpecifyModel & Degree(If Hold Open)

TopPivot Pkg

BottomArm Pkg

FloorPlate Pkg

CementCase Pkg

H40N H40N LAP H340 262022 404020-* 403000

$3,212.00 $2,037.00 $397.00 $544.00 $119.00 $115.00

H40A H40A LAP H340 262022 404020-* 403000

$3,326.00 $2,151.00 $397.00 $544.00 $119.00 $115.00

H40N X 587 H40N LAP H340 262587 404020-* 403000

$3,212.00 $2,037.00 $397.00 $544.00 $119.00 $115.00

H40A X 587 H40A LAP H340 262587 404020-* 403000

$3,326.00 $2,151.00 $397.00 $544.00 $119.00 $115.00

H e a v y D u t y




21/140


22/140

22

Heavy Duty Floor Closers

Accessories

How To Order

How To Order)

FPrefix

27Model

90Degree of

Swing

NHold Open

x 1/2" Ext SpindleSuffix

x RHHand

x 626Finish

DA Delayed Action

PH LighterSpring(ADA)

F FireRatedDoors

W WoodDoor(centerhung)

27127427327L27Q27

QT27HM27

2028

H28328428

EH283040

H40

859095

105100 (30 and

40 Series)180 (20 and27-180 only)

N = Non-HoldOpen

A = AutomaticHold Open

S = SelectiveHold Open

1-1/2OS 1-1/2" Offset2"2-1/4"2-1/2"3"554 Concealed Arm (28)587 H Arm (H28, H40)Ext Spdl Extended Spindle-20 20 Minute label8.5# Optional PH SpringLAP Less All PartsLFP Less Floor PlateLCC Less Cement CaseLTP Less Top PivotCWF Cold Weather Fluid

- Depth for Cover Pan- # of Wires for

Electrified ProductTORX Security Screws

(Offset Only)SPLO# Special Layout

Blank (30 & 40)RH Right HandLH Left Hand

605 Bright Brass606 Satin Brass611 Bright Bronze612 Satin Bronze613 Dark Bronze613E Dark Oxidized

Satin Bronze- Equivalent

618 Bright Nickel619 Satin Nickel622 Flat Black625 Bright Chrome626 Satin Chrome

1101 Cement Case for use with expansion joints, (handed) $397.00

79501 Cement Case for use with shallow floors (non-handed) $238.00

25204 Twin Cement Case 1-7/8" Mullion for back to back closers. Must be ordered with closers. $190.00

25304 Twin Cement Case 2" Mullion for back to back closers. Must be ordered with closers. $190.00

846* Cover Pan for 27 closer, specify depth, hand 1-3/4 doors only $587.00

3910* Cover Pan for L27 closer, specify depth, hand 1-3/4 doors only $587.00

2237* Cover Pan for 28 closer x 554 flat arm, specify depth, hand. $587.00

841* Cover Pan for 28 closer, centering arm, specify depth, hand. $587.00

60131 Lock edge applied stop for center hung doors. Specify finish. $63.00

1859001 Quickspotter Installation 25, 27, 28, 30, 40 $84.00

1859501 Quickspotter Installation for Q27 $84.00

* Specify stainless steel or brass

Door Control Accessories

Price


H e a v y D u t y


}Door ThicknessL Series Product Only



23/140

23

*Finish required, see page 30 NBC = Non-Hold open with backcheck ABC = Automatic Hold Open with backcheck Note: Buying program discount on Pivots applies when Pivots are ordered separately LAP= Less All Parts **Pricing for Offset 1-3/4 thick doors hung on standard 4-1/2 x 4-1/2 butts or 3/4 offset pivots. For all other hanging means or doorthicknesses, consult factory. Prices will be affected and will not carr y any buy program or quote discounting.

Shallow Depth

Offset Hung Floor ClosersNote that all fire rated openings must have a minimum of one intermediate pivot. See page 48

Options on page 29


Standard Weight/Duty 3/4" Offset

ModelComplete CloserSpecify Model,Hand & Degree(If Hold Open)

LAP SpecifyModel, Hand &

Degree(If Hold Open)

Top Pivot Pkg Bottom Arm Pkg Floor Plate Pkg Cement CasePkg

5103NBC5104NBC5105NBC

5103NBC LAP5104NBC LAP5105NBC LAP

180 252050R* 4000500R*XXE

4000301252050L* 4000500L*XXE

$1,414.00 $939.00 $186.00 $98.00 $97.00 $94.00

5103ABC5104ABC5105ABC

5103ABC LAP5104ABC LAP5105ABC LAP

180 252050R* 4000500R*XXE

4000301252050L* 4000500L*XXE

$1,464.00 $989.00 $186.00 $98.00 $97.00 $94.00

F5103NBCF5104NBCF5105NBC


F180 252050R* 4000500R*XXE

4000301252050L* 4000500L*XXE

$1,660.00 $939.00 $432.00 $98.00 $97.00 $94.00

03.ShallowDepthClosers.Nov2014:RixsonPriceBook_Front.qxd 9/2/14 1:40 PM Page 23


24/140

Standard Weight/Duty 1-1/2" Offset


Specify Model, Hand &Degree

(If Hold Open)




5103NBC x 1-1/2OS5104NBC x 1-1/2OS5105NBC x 1-1/2OS


180 x 1-1/2OS252060R* 4000500R*XXE

4000301252060L* 4000500L*XXE

$1,612.00 $939.00 $332.00 $150.00 $97.00 $94.00

5103ABC x 1-1/2OS5104ABC x 1-1/2OS5105ABC x 1-1/2OS


180 x 1-1/2OS252060R* 4000500R*XXE

4000301252060L* 4000500L*XXE

$1,662.00 $989.00 $332.00 $150.00 $97.00 $94.00

F5103NBC x 1-1/2OSF5104NBC x 1-1/2OSF5105NBC x 1-1/2OS


F180 x 1-1/2OS252060R* 4000500R*XXE

4000301252060L* 4000500L*XXE

$1,978.00 $939.00 $698.00 $150.00 $97.00 $94.00

Independently Hung (HANGING MEANS AFFECT PRICING AND MUST BE NOTED WHEN ORDERING)


Specify Model, Handand Hanging Means

LAP SpecifyModel & Hand Top Pivot Pkg Bottom Arm Pkg Floor Plate Pkg

CementCase Pkg

**F5303NBC**F5304NBC**F5305NBC


N/A 3252010-* 4000600-*XXE 4000301

$1,417.00 $939.00 $290.00 $94.00 $94.00

**F5313NBC**F5314NBC**F5315NBC


N/A 3252010-* 4000600-*XXE 4000301

$2,034.00 $988.00 $290.00 $94.00 $94.00

Parallel toFrame

Perpendicularto Frame

24

*Finish required, see page 30 NBC = Non-Hold open with backcheck ABC = Automatic Hold Open with backcheck Note: Buying program discount on Pivots applies when Pivots are ordered separately LAP= Less All Parts **Pricing for Offset 1-3/4 thick doors hung on standard 4-1/2 x 4-1/2 butts or 3/4 offset pivots. For all other hanging means ordoor thicknesses, consult factory. Prices will be affected and will not carry any buy program or quote discounting.

Shallow Depth


Options on page 29


S h a l l o w D e p t h




25/140

25

*Finish required, see page 30 NBC = Non-Hold open with backcheck ABC = Automatic Hold Open with backcheck Note: Buying program discount on Pivots applies when Pivots are ordered separately LAP= Less All Parts

Shallow Depth


Options on page 29


Standard Weight/Duty Quick Install


LAP SpecifyModel, Hand &Degree

(If Hold Open)

Top PivotPkg

Bottom ArmPkg Floor Plate Pkg

CementCase Pkg

IntermediatePivot

Q5103NBCQ5104NBCQ5105NBC

Q5103NBC LAPQ5104NBC LAPQ5105NBC LAP

180222050R* 4000501R*XXE

4000301 M19222050L* 4000501L*XXE

$1,838.00 $1,000.00 $186.00 $200.00 $94.00 $94.00 $264.00

Q5103ABCQ5104ABCQ5105ABC

Q5103ABC LAPQ5104ABC LAPQ5105ABC LAP

180222050R* 4000501R*XXE

4000301 M19222050L* 4000501LXXE*

$1,888.00 $1,050.00 $186.00 $200.00 $94.00 $94.00 $264.00

FQ5103NBCFQ5104NBC

FQ5105NBC

Q5103NBC LAPQ5104NBC LAP

Q5105NBC LAP

F180222050R* 4000501R*XXE

4000301 FM19

222050L* 4000501L*XXE$2,388.00 $1,000.00 $432.00 $200.00 $94.00 $94.00 $568.00

QT5103NBCQT5104NBCQT5105NBC


180222050R*

N/A 4000301 M19222050L*

$1,744.00 $1,000.00 $186.00 $200.00 $94.00 $264.00

QT5103ABCQT5104ABCQT5105ABC

Q5103ABC LAPQ5104ABC LAPQ5105ABC LAP

180222050R*

N/A 4000301 M19222050L*

$1,794.00 $1,050.00 $186.00 $200.00 $94.00 $264.00

FQT5103NBCFQT5104NBCFQT5105NBC


F180222050R*

N/A 4000301 FM19222050L*

$2,294.00 $1,000.00 $432.00 $200.00 $94.00 $568.00



26/140

26

*Finish required, see page 30 NBC = Non-Hold open with backcheck ABC = Automatic Hold Open with backcheck Note: Buying program discount on pivots applies when pivots are ordered separately.LAP= Less All Parts

Shallow Depth

Offset Hung Floor ClosersNote that all fire rated openings must have a minimum of 3 hinges.

Options on page 29



F l o o r C l o s e r s Standard Weight/Duty HM Door and Frame Preps


LAP Specify Model,Hand & Degree(If Hold Open)

Hinge Pkg(3 per pkg)

BottomArm Pkg

FloorPlate Pkg

CementCase Pkg

HM5103NBCHM5104NBCHM5105NBC


254545*PK222050R*HM 4000501R*XXE

4000301222050L*HM 4000501L*XXE

$1,852.00 $939.00 $525.00 $200.00 $94.00 $94.00

HM5103ABCHM5104ABCHM5105ABC


254545*PK222050R*HM 4000501R*XXE

4000301222050L*HM 4000501L*XXE

$1,902.00 $989.00 $525.00 $200.00 $94.00 $94.00

FHM5103NBCFHM5104NBCFHM5105NBC


254545*PK222050R*HM 4000501R*XXE

4000301222050L*HM 4000501L*XXE

$1,852.00 $939.00 $525.00 $200.00 $94.00 $94.00



27/140

27

*Finish required, see page 30 NBC = Non-Hold open with backcheck ABC = Automatic Hold Open with backcheck Note: Buying program discount on Pivots applies when Pivots are ordered separately LAP= Less All Parts

Shallow Depth

Center Hung Floor ClosersOptions on page 29


Standard Weight /Duty Single Acting



(If Hold Open)

Top PivotPkg

Bottom ArmPkg

Floor PlatePkg

Cement CasePkg

5013NBC x 5545014NBC x 5545015NBC x 554


340 282554 4000600-*XXE 4000301

$1,374.00 $939.00 $122.00 $125.00 $94.00 $94.00

5013ABC x 5545014ABC x 5545015ABC x 554


340 282554 4000600-*XXE 4000301

$1,424.00 $989.00 $122.00 $125.00 $94.00 $94.00


5013NBC LAP5014NBC LAP5015NBC LAP 340 282026* 4000600-*XXE 4000301

$1,374.00 $939.00 $122.00 $125.00 $94.00 $94.00



340 282026* 4000600-*XXE 4000301

$1,424.00 $989.00 $122.00 $125.00 $94.00 $94.00



28/140

28

*Finish required, see page 30 NBC = Non-Hold open with backcheck ABC = Automatic Hold Open with backcheck Note: Buying program discount on pivots applies when pivots are ordered separately.LAP= Less All Parts

Shallow Depth

Center Hung Floor ClosersOptions on page 29



F l o o r C l o s e r s Standard Weight/Duty Double Acting



(If Hold Open)Top Pivot Pkg Bottom Arm Pkg Floor Plate Pkg Cement CasePkg



340 282026* 4000600-*XXE 4000301

$1,890.00 $1,455.00 $122.00 $125.00 $94.00 $94.00



340 282026* 4000600-*XXE 4000301

$1,940.00 $1,505.00 $122.00 $125.00 $94.00 $94.00

Patch Fittings Single Acting




Top Patch Bottom Patch Floor Plate Cement Case



7494*PK 7495*PK 4000600-*XXE 4000301

$1,659.00 $939.00 $261.00 $271.00 $94.00 $94.00



7494*PK 7495*PK 4000600-*XXE 4000301

$1,709.00 $989.00 $261.00 $271.00 $94.00 $94.00



29/140

29

Shallow Depth Floor Closers

Options

Accessories


Prefix Description PricePH Physically Handicapped 5# of opening force for ADA compliance for interior doors.

Rixson will not be responsible if fire door will not completely close when PH productsare supplied.NOTE: Spring sizes are 2 and 3. See catalog.

$75.00

DA Delayed Action holds door open at 70 degrees for up to 40 seconds. Closers withthis feature will not have backcheck. DA cannot be ordered with hold open closers $125.00

W For center hung wood doors using arm 282026. $0.00

Suffix

Ext Spdl To accommodate special floor conditions, the spindle can be ordered with longerspindle 1/2" increments up to and including 2" longer. $61.00

Torx Security screws. Only provided for screws visible. $207.00

-20 20 minute UL listing for smoke doors. Do not prefix F. $20.00

SPLO Special layout that may require special templating and/or productsExcluded frombuying programConsult factoryfor pricing

SCSealing a closer protects it from moisture. Cement case and closer body aregasketed and fastened together. Closer must be ordered with cement case andshipped at the same time

$119.00

Quick Reference of Options

2637* Cover Pan for 51 closer, specify depth. $861.00

2807D* Cover Pan for 53 closer, specify depth. $861.00

2807B* Cover Pan for 50 closer x 554 flat arm, specify depth.$861.00

2807A* Cover Pan for 50 closer, centering arm, specify depth.$861.00

60131 Lock edge applied stop for center hung doors, specify finish$63.00

1855051 50/51/53 Quickspotter. Quickspotter Installation Tool for 50/51/53$84.00

*Specify stainless steel or brass




30/140

Shallow Depth Floor Closers

How To Order




FPrefix 510Model3

SpringSize NBCFunction x 1-1/2" OffsetSuffix x RH Hand x 626Finish

SC SealedCloser

DA Delayed Action


F FireRatedDoors

W Wd Dr(centerhung)

510 Offset530 Independently

Hung Parallelto Frame

531 IndependentlyHungPerpendicularto Frame

501 Center HungSingle Acting

502 Center HungDouble Acting

504 Center Hungwith PatchFittings

2345

NBC = Non-HoldOpen

ABC = AutomaticHold OpenSpecifyDegree

554 Flat ArmExtendedSpindles

1-1/2" Offset-20 20 Minute

LabelLAP Closer

Body OnlyLFP Less

Floor PlateLCC Less

Cement CaseLTP Less Top

Pivot- Cover Pan

(x Depth)SPLO Special

Layout #

Blank (5020)RH Right HandLH Left Hand

605 Bright Brass606 Satin Brass611 Bright Bronze612 Satin Bronze613 Dark Bronze613E Dark Oxidized

Satin Bronze- Equivalent

618 Bright Nickel619 Satin Nickel622 Flat Black625 Bright

Chrome626 Satin Chrome



31/140

31

*Finish required, see page 33 Note: Buying program discount on pivots applies when pivots are ordered separately.LAP= Less All Part

Specialty Closers

Options, see page 33


Cl o s er s

Duo Chek Double Acting

Model Complete Closer

Specify ModelLAP Specify

ModelTop Pivot

PkgBottom Arm

PkgFloor Plate

PkgCement Case

Pkg

1015

10 LAP15 LAP 101020* 102026-* 104020-* 103000*

$952.00 $551.00 $131.00 $94.00 $66.00 $110.00

1216

12 LAP16 LAP 101020* 102026-* 104020- 103000-*

$903.00 $502.00 $131.00 $94.00 $66.00 $110.00

Gate Closers

Model Complete CloserSpecify ModelLAP Specify

ModelTop Pivot

PkgBottom Arm

PkgFloor Plate

PkgCement Case

Pkg

354 X03540370-*

3541020-* 3542026-* N/A N/A

355 3551020-* 3542026* N/A N/A

$1,175.00 $747.00 $212.00 $216.00

356

X03540370-*

3541020-* 3562020-* N/A N/A

357 3551020-* 3562020* N/A N/A

$1,175.00 $747.00 $212.00 $212.00

359 X03540370-* N/A 3592010-* N/A N/A

$1,173.00 $747.00 $426.00

Security Closers

Model

Complete CloserSpecify Model,Hand & Degree

(SEC27)


Degree (SEC27)Top Pivot Pkg Bottom Arm Pkg Floor Plate Pkg Cement CasePkg

SEC27-180N 27-180N LAP FA180252056R*

274056*253006R

252056L* 253006L

$2,625.00 $1,081.00 $479.00 $174.00 $603.00 $288.00

Independently Hung

04.SpecialtyClosers.Nov2014:RixsonPriceBook_Front.qxd 9/2/14 1:42 PM Page 31


32/140

32

Specialty Closers


Exterior Gate Closer

Model Complete Closer

Specify Model

1350

$449.00

1351

$500.00


S p e c

i a l t y

C l o s e r s

*Finish required, see page 33 Non-Hold open Only Note: Buying program discount on pivots applies when pivots are ordered separately.LAP= Less All Parts



33/140

33

Specialty Closers

Options

How To Order


Cl o s er s

Prefix Description Price

PH

Physically Handicapped 5# of opening force in compliance to ADA standard forinterior doors. If used on exterior or fire doors, the low opening force may not beenough to close the door.Not available on gate closers or SEC closers.

$75.00

Suffix Description

Ext Spdl

To accommodate special floor conditions, the spindle can be ordered in 1/2"increments up to and including 2" Closer must be ordered with longer spindle, itcannot be field adjusted.Not available on gate closers.

$61.00

SPLO Special layout that may require special templating and/or products

Excluded frombuyingprograms -contact factoryfor pricing

Quick Reference Options

How To Order

Prefix Sec 27ModelN

Hold Openx LTPSuffix x RHHand

x 689Finish


10 Duo Chek(Hold Open)

12 Duo Chek15 Duo Chek

(Hold Open)16 Duo Chek354 Gate355 Gate356 Gate357 Gate359 GateSEC27-180 Security1350 Exterior Gate1351 Exterior Gate

Blank = Not Applicable

N = Non-HoldOpen

1-1/2OS 1-1/2" OffsetExt Spdl Extended

SpindleLAP Less All PartsLFP Less Floor

PlateLCC Less Cement

CaseLTP Less Top

PivotDepth forCover Pan

SPLO# SpecialLayout

Blank(10, 12, 15,16, 354, 355,356, 357, 359)RH Right HandLH Left Hand

605 Bright Brass606 Satin Brass611 Bright Bronze612 Satin Bronze613 Dark Bronze613E Dark Oxidized Satin

Bronze - Equivalent618 Bright Nickel619 Satin Nickel622 Flat Black625 Bright Chrome626 Satin Chrome

(Sprayed finishes350 Seriesgate closers only)

689 Sprayed Aluminum690 Sprayed Dark Bronze691 Sprayed Light Bronze693 Sprayed Black -1350

and 1351696 Sprayed Brass



34/140


35/140

35



*Finish required, stainless steel or brass

Roller Mate Caster

Model Description Price

10600 Single Roller Caster See Page 53

10602 Double Roller Caster See Page 53

10600-025 for 10600

10600-028 for 10602Hollow Metal Reinforced Plate See Page 53

Special Cement Cases


1101 Cement Case for use with expansion joints, handed See Page 22

79501 Cement Case for use with shallow floors See Page 22

25204 Twin Cement Case 1-7/8" Mullion for back to backclosers. Must be ordered with closers See Page 22

25304 Twin Cement Case 2" Mullion for back to back closers.Must be ordered with closers. See Page 22

Cover Pans


846* Cover Pan for 27 closer, specify depth, hand. 1-3/4 doors only. See Page 22

3910* Cover Pan for L27 closer, specify depth, hand. 1-3/4 doors only See Page 22

2237* Cover Pan for 28 closer x 554 flat arm, specify depth, hand. See Page 22

841* Cover Pan for 28 closer, centering arm, specify depth, hand. See Page 22

841B* Cover Pan for H28 and H28 x 587 arm closers, specify depth, hand. See Page 22

2637* Cover Pan for 51 closer, specify depth, hand. 1-3/4 doors only. See Page 29

2807D* Cover Pan for 53 closer, specify depth, hand. See Page 29

2807B* Cover Pan for 50 closer x 554 flat arm, specify depth, hand. See Page 29

2807A* Cover Pan for 50 closer, centering arm, specify depth, hand. See Page 29

05.DoorControlAccess.Nov2014:RixsonPriceBook_Front.qxd 9/2/14 1:45 PM Page 35


36/140

36

D o o r C o n t r o l

A c c e s s o r i e s



D o o r C o n t r o l

A c c e s s o r i e s

Applied Stop


60131Specify Finish

Lock edge applied stopfor single acting centerhung doors

See Page 29

Installation Tools


2604 Pivot Alignment ToolSee Page 53

2608 Pivot Alignment Tool for L180, H340 and H345

1859001 27/28/30/40 Quickspotter Installation Tool See Page 22

1859501 Q27 Quickspotter Installation Tool See Page 22

1855051 50/51/53 Quickspotter Installation Tool See Page 29

05.DoorControlAccess.Nov2014:RixsonPriceBook_Front.qxd 9/2/14 1:45 PM Page 36


37/140

37

Overhead Concealed Closers

Offset Commodity Grade

*Finish required, sprayed finishes only see page 39 - Arms are sprayed finishes only N = Non-Hold open A = Automatic Hold OpenLAP = Less All Parts



l l r

Offset Hung


Specify Model andDegree

(If Hold Open)

LAP Specify Model and Degree

(If Hold Open)

MountingBracket/Channel

Top Arm & RailPackage Cover Plate Pkg

0608 608 LAP 608019 06082012-* N/A

$634.00 $406.00 $44.00 $184.00

M0608 608 LAP 608049PKG 06082012-* 6084000*

$861.00 $406.00 $168.00 $184.00 $103.00

MW0608 608 LAP 608049PKG 06082012-* 6084000*

$861.00 $406.00 $168.00 $184.00 $103.00

W0608 608 LAP 608049PKG 06082012-* 6084000*

$861.00 $406.00 $168.00 $184.00 $103.00

AW0608 608 LAP 608019 06082012-* N/A

$634.00 $406.00 $44.00 $184.00

See model 547 pivot set on page 46 as a method to hang doors.

Pricing for 1-3/4 thick doors hung on standard 4-1/2 x 4-1/2 butts or 3/4 offset pivots. For all other hanging means or door thicknesses,

consult factory. Prices will be affected and will not carry any buy program or quote discounting.

06.OverheadConcealed.Nov2014:RixsonPriceBook_Front.qxd 9/2/14 1:46 PM Page 37


38/140

38


Center Hung Commodity Grade

*Finish required, sprayed finishes only see page 39N = Non-Hold open A = Automatic Hold OpenLAP = Less All Parts


Center Hung


O v e r h e a

d

C o n c e a

l e d C l o s e r s


Specify Model andDegree

(If Hold Open)

LAP Specify Model andDegree (If

Hold Open)

MountingBracket/Channel

Top ArmPackage

Bottom PivotPackage

Cover PlatePkg

608EL 608 LAP 608019 6002020 608011A N/A

$639.00 $406.00 $44.00 $64.00 $125.00

608SL 608 LAP 608019 608005S 608011A NA

$639.00 $406.00 $44.00 $64.00 $125.00

M608 608 LAP 608049PKG 6002020 608011A 6084000*

$866.00 $406.00 $168.00 $64.00 $125.00 $103.00

MW608 608 LAP 608049PKG 6002021 608011A 6084000*

$866.00 $406.00 $168.00 $64.00 $125.00 $103.00

W608 608 LAP 608049PKG 6002021 608011A 6084000*

$866.00 $406.00 $168.00 $64.00 $125.00 $103.00

AW608 608 LAP 608019 6002021 608011A N/A

$639.00 $406.00 $44.00 $64.00 $125.00



39/140

39


Commodity Grade

Options

How to Order


l l r

Suffix Description Price1/2 Ext Spdle Longer spindle for unique head conditions $152.00

Quick Reference of Options

How To Order

Commodity Grade Closer Model

M608Model

90A Hold Open

or Not

x 1/2" Ext SpdlSuffix

x 626Finish

Offset Hung0608 Aluminum Dr & Fr

M0608 Metal Dr & FrMW0608 Wood Dr & Metal FrW0608 Wood Dr and Fr AW0608 Wood Dr and Alum FrCenter Hung608EL End Load Arm Alum Dr & Fr608SL Side Load Arm Alum Dr & FrM608 Metal Dr & FrMW608 Wood Dr & Metal FrW608 Wood Dr & Fr AW608 Wood Dr and Alum Fr

90A Hold Open105A Hold Open

N Non-HoldOpen

1/2" ExtendedSpindle

605 Bright Brass606 Satin Brass

611 Bright Bronze612 Satin Bronze613 Dark Bronze613E Dark Oxidized Satin

Bronze - Equivalent618 Bright Nickel619 Satin Nickel622 Flat Black625 Bright Chrome626 Satin ChromeFor Arms Only689 Sprayed Aluminum690 Sprayed Dark Bronze691 Sprayed Light Bronze696 Sprayed Brass



40/140

40


Offset Architectural Grade

Offset Hung

Model

Complete CloserSpecify Model

Size, Handand Degree

LAP Specify Model Size,Hand and

Degree

MountingBracket/Channel/

Plate

Top Arm & RailPackage

Cover PlatePkg

070607070708

706 LAP707 LAP708 LAP

1639000

0800012R*

N/A

0800012L*

$1,874.00 $1,597.00 $52.00 $225.00

M0706M0707M0708


01920910

0800012R* 7004000R*

0800012L* 7004000L*

$2,135.00 $1,597.00 $160.00 $225.00 $153.00

MW0706MW0707

MW0708

706 LAP707 LAP

708 LAP

01920910

0800011R* 7004000R*

0800011L* 7004000L*

$2,135.00 $1,597.00 $160.00 $225.00 $153.00

W0706W0707W0708


01980910

0800011R* 7004000R*

0800011L* 7004000L*

$2,135.00 $1,597.00 $160.00 $225.00 $153.00


O v e r h e a

d

C o n c e a

l e d C l o s e r s


*Finish required, see page 43N = Non-Hold open A = Automatic Hold OpenLAP = Less All Parts

See model 547 pivot on page 43 as a method to hang doors.

Pricing for 1-3/4 thick doors hung on standard 4-1/2 x 4-1/2 butts or 3/4 offset pivots. For all other hanging means or door thicknesses,consult factory. Prices will be affected and will not carry any buy program or quote discounting .



41/140

41


Center Architectural Grade

*Finish required, see page 43N = Non-Hold open A = Automatic Hold OpenLAP= Less All Parts



l l r

Center Hung Single Acting

Model

CompleteCloser Specify

Model Size,Hand and

Degree

LAP Specify Model Size,Hand and

Degree

MountingBracket/ Channel/

Plate

Top ArmPackage

Bottom PivotPackage

Cover PlatePackage

706707708


1639000 8002020 2183020 N/A

$1,910.00 $1,597.00 $52.00 $110.00 $151.00

M706M707M708


1929000 8002020 2183020

7004000R

7004000L*

$2,171.00 $1,597.00 $160.00 $110.00 $151.00 $153.00

MW706MW707MW708


1929000 8002021 2183020

7004000R*

7004000L*

$2,205.00 $1,597.00 $160.00 $144.00 $151.00 $153.00

W706W707W708


1989000 8002021 2183020

7004000R*

7004000L*

$2,205.00 $1,597.00 $160.00 $144.00 $151.00 $153.00



42/140

42


Center Hung Architectural Grade

*Finish required, see page 43N = Non-Hold open A = Automatic Hold OpenLAP = Less All Parts



O v e r h e a

d

C o n c e a

l e d C l o s e r s

Center Hung Double Acting

Model

CompleteCloser Specify

Model Sizeand Degree

LAP Specify Model Sizeand Degree

MountingBracket/ Channel/

Plate

Top ArmPackage

Bottom PivotPackage

Cover PlatePackage

806807808


1639000 8002020 2183020 N/A

$1,910.00 $1,597.00 $52.00 $110.00 $151.00

M806M807M808


1929000 8002020 2183020 8004000*

$2,171.00 $1,597.00 $160.00 $110.00 $151.00 $153.00

MW806MW807MW808


1929000 8002021 2183020 8004000*

$2,205.00 $1,597.00 $160.00 $144.00 $151.00 $153.00

W806W807W808


1989000 8002021 2183020 8004000*

$2,205.00 $1,597.00 $160.00 $144.00 $151.00 $153.00



43/140

43


Architectural Grade

Options

How to Order


l l r

Suffix Description Price

1/2 Ext Spdle Longer spindle for unique frame conditions $321.00

199 Decorative end caps for center hung wood doors $78.00

SPLO Special templating and products Excluded frombuying programs- contact factoryfor pricing

How To Order

Architectural Grade Closer Models 700 & 800

M706Model (specify spring size 6, 7, or 8)

90A Degree

x 1/2" Ext SpdlSuffix

x RHHand

x 626Finish

Offset Hung0700 Aluminum Dr & FrM0700 Metal Dr & FrMW0700 Wood Dr & Metal FrW0700 Wood Dr and FrSingle Acting Center Hung700 Aluminum Dr. & FrM700 Metal Dr & FrMW700 Wood Dr & Metal FrW700 Wood Dr & FrDouble Acting Center Hung

800 Aluminum Dr & FrM800 Metal Dr & FrMW800 Wood Dr & Metal FrW800 Wood Dr & Fr

90A HoldOpen

105A HoldOpen

90N Non-HoldOpen

105N Non-HoldOpen

1/2" ExtendedSpindle

SPLO SpecialMaterialLayout

Blank Dbl ActingRH Right HandLH Left Hand

605 Bright Brass606 Satin Brass611 Bright Bronze612 Satin Bronze613 Dark Bronze613E Dark Oxidized Satin

Bronze - Equivalent618 Bright Nickel619 Satin Nickel622 Flat Black625 Bright Chrome626 Satin Chrome ALL ARMS689 Sprayed Aluminum690 Sprayed Dark Bronze691 Sprayed Light Bronze696 Sprayed Brass



44/140


07.Pivots.Nov2014:RixsonPr iceBook_Front.qxd 9/2/14 2:20 PM Page 44


45/140

45

Pivots and Pivot Sets

Offset Hung Pivot SetsOptions on page 53

*Finish required, see page 53


Offset Hung Pivot Sets

Model Description Painted Plated

117-1/4 3/4 Offset (includes 180 top pivot) N/A $397.00

117 3/4 Offset (includes 180 top pivot) N/A $397.00

117 x 1-1/2OS 1-1/2 Offset (includes 180 x 1-1/2OS top pivot) N/A $357.00

F117 Fire rated 3/4 Offset (includes F180 top pivot) $415.00 $698.00

F117 x 1-1/2OS Fire rated 1-1/2 Offset (includes F180 top pivot) $642.00 $1,041.00

117-20 3/4 Offset x 20 min (includes 180 - 20 top pivot) N/A $413.00



147 x 1-1/2OS 1-1/2 Offset (includes 180 x 1-1/2OS top pivot) N/A $772.00

F147 Fire rated 3/4 Offset (includes F180 top pivot) $591.00 $847.00

F147 x 1-1/2OS Fire rated 1-1/2 Offset (includes F180 x 1-1/2OS

top pivot) $791.00 $1,128.00

147-20 3/4 Offset x 20 min (includes 180-20 top pivot) N/A $573.00

147-20 x 1-1/2OS 1-1/2 Offset (includes 180-20 top pivot) N/A $777.00

L147 3/4 Offset x1-3/4 door (includes L180 top pivot) N/A $785.00

L147 3/4 Offset x 2, 2-1/4, 2-1/2 or 3 doors (includesL180 top pivot) N/A $1,134.00

FL147 Fire rated 3/4 Offset x 1-3/4 door (includes FL180top pivot) $813.00 $1,120.00

L147-20 3/4 Offset x 1-3/4 door (includes L180-20 top pivot) N/A $794.00



46/140

46


Offset Hung Pivot SetsOptions on page 53


Offset Hung Pivot Sets


547 3/4 Offset (includes 2 each M190 intermediatepivots)

N/A $628.00

F547 Fire rated 3/4 Offset (includes 2 each FM190intermediate pivots) $628.00 $885.00

165 3/4 Offset (includes 180 top pivot and 2 each M190intermediate pivots) N/A $846.00


F195 Fire rated Offset (includes F180 top Pivot) N/A $832.00

117-1/2 3/4 Offset (includes 180 top pivot) N/A $837.00

117-1/2 x 1-1/2OS 1-1/2 Offset (includes 180 x 1-1/2OS top pivot) N/A $1,034.00

117-1/2-20 3/4 Offset 20 min (includes 180-20 top pivot) N/A $852.00

F117-1/2 Fire rated 3/4 Offset (includes F180 top pivot) $849.00 $1,041.00

F117-1/2 x 1-1/2OS Fire rated 1-1/2 Offset (includes F180 x 1-1/2OStop pivot) $1,060.00 $1,409.00

L117 3/4 Offset x 1-3/4 door (includes L180 top pivot) N/A $1,138.00

L117 3/4 Offset x 2, 2-1/4, 2-1/2 or 3 doors (includesL180 top pivot) N/A $1,487.00

FL117 Fire rated 3/4 Offset x 1-3/4 door (includes FL180top pivot) $1,171.00 $1,485.00

L117-20 3/4 Offset x 20 min x 1-3/4 door (includes L180-20

top pivot) N/A $1,157.00


P i v o

t s &

P i v o

t S e

t s



47/140

47


Offset Hung Top PivotsOptions on page 53

Offset Hung Top Pivot

Model Description Painted Plated180 3/4 Offset N/A $186.00

180 x 1-1/2OS 1-1/2 Offset N/A $332.00

H180 3/4 Offset N/A $247.00

H180 x 1-1/2OS 1-1/2 Offset N/A $391.00

F180 Fire rated 3/4 Offset $205.00 $432.00

F180 x 1-1/2OS Fire rated 1-1/2 Offset $345.00 $698.00

FH180 Fire rated 3/4 Offset $267.00 $525.00

180-20 3/4 Offset x 20 min N/A $196.00

180-20 x 1-1/2OS 1-1/2 Offset x 20 min N/A $338.00

H180-20 3/4 Offset x 20 min N/A $261.00

L180 3/4 Offset x 1-3/4 door N/A $302.00L180 3/4 Offset x 2, 2-1/4, 2-1/2, or 3 doors N/A $456.00

L180-20 3/4 Offset x 20 min x 1-3/4 door only N/A $313.00

FL180 Fire rated 3/4 Offset x 1-3/4 door only $315.00 $633.00

FA180 3/4 Offset $249.00 $479.00

180 x 102 3/4 Offset N/A $294.00

180 x 102 x 1-1/2OS 1-1/2 Offset N/A $429.00

280 3/4 Offset N/A $259.00


280-20 3/4 Offset x 20 min N/A $271.00

380 3/4 Offset N/A $259.00


380-20 3/4 Offset x 20 min N/A $271.00

L380 3/4 Offset x 1-3/4 door only N/A $435.00

L380 3/4 Offset x 2, 2-1/4, 2-1/2, or 3 doors N/A $603.00

FL380 Fire rated 3/4 Offset x 1-3/4 door only $463.00 $764.00

L380-20 3/4 Offset x 20 min x 1-3/4 door only N/A $448.00

480 3/4 Offset N/A $318.00


480-20 3/4 Offset x 20 min N/A $338.00

680 3/4 Offset N/A $348.00





48/140

48

Note that all fire rated openings must havea minimum of one intermediate pivot



Intermediate Pivots

Intermediate Pivots


M19 3/4 Offset N/A $264.00

M19 x 1-1/2OS 1-1/2 Offset N/A $408.00

FM19 Fire rated 3/4 Offset $294.00 $568.00

FM19 x 1-1/2OS Fire rated 1-1/2 Offset $440.00 $853.00

M190 3/4 Offset N/A $333.00

M190 x 1-1/2OS 1-1/2 Offset N/A $466.00

FM190 Fire rated 3/4 Offset $368.00 $700.00

FM190 x 1-1/2OS Fire rated 1-1/2 Offset $507.00 $849.00

M19-20 3/4 Offset x 20 min N/A $274.00

M19-20 x 1-1/2OS 1-1/2 Offset x 20 min N/A $427.00

M190-20 3/4 Offset x 20 min N/A $340.00

ML19 3/4 Offset x 1-3/4 door only N/A $393.00

ML19 3/4 Offset x 2, 2-1/4, 2-1/2, or 3 doors N/A $559.00

FML19 Fire rated 3/4 Offset x 1-3/4 door only $425.00 $823.00

ML19-20 3/4 Offset x 20 min x 1-3/4 door only N/A $412.00

FA19 3/4 Offset $333.00 $633.00

FA190 3/4 Offset $418.00 $633.00

119 3/4 Offset N/A $202.00

219 3/4 Offset N/A $311.00

219-20 3/4 Offset x 20 min N/A $327.00

319 3/4 Offset N/A $311.00

319-20 3/4 Offset x 20 min N/A $334.00

L319 3/4 Offset x 1-3/4 door only N/A $493.00L319-20 3/4 Offset x 20 min x 1-3/4 door only N/A $512.00

419 3/4 Offset N/A $363.00

419-20 3/4 Offset x 20 min N/A $378.00


P i v o

t s &

P i v o

t S e

t s



49/140

49



Electrified Intermediate Pivots

& Pocket Pivots

Electrified Intermediate Pivots

Pocket Pivot

Model Number Description Price

CSM19 3/4" Offset Monitor PivotElectroLynx not available $610.00

CSM19 x 1-1/2OS 1-1/2" Offset Monitor PivotElectroLynx not available $777.00

CSEM19 3/4" Offset Monitor & Power Transfer PivotSpecify number of wires (4, 6, 8,12 for power transfer only) $847.00

CSEM19 x 1-1/2OS 1-1/2" Offset Monitor & Power Transfer PivotSpecify number of wires (4, 6, 8,12 for power transfer only) $1,452.00

CSML19 3/4" Offset Monitor Pivot Heavy Weight/High Traffic1-3/4" Door. ElectroLynx not available $1,112.00

EFM19 Fire Rated 3/4" Offset Power Transfer Pivot

Specify number of wires (4, 6, 8, 12) $1,032.00

EM19 x 1-1/2OS 1-1/2" Offset Power Transfer PivotSpecify number of wires (4, 6, 8, 12) $690.00

EFML19Fire rated 3/4" Offset Power Transfer Pivot Heavy Weight/HighTraffic 1-3/4" Dr.Specify number of wires (4, 6, 8, 12)

$1,561.00

EML193/4" Offset Power Transfer Pivot Heavy Duty/Weight/HighTraffic 1-3/4 DrSpecify number os wires (4, 6, 8, 12)

$1,104.00

EM19U3/4" Offset Power Transfer High Inrush Pivot(2 wires only)ElectroLynx not available

$939.00

EM19 3/4" Offset Power Transfer PivotSpecify number of wires (4, 6, 8, 12) $487.00

Model Number Description Painted Plated

F519 Pocket Pivot $412.00 $502.00

EF519 Electrified Power Transfer Pivot Available in 4 wires only NA $931.00


ElectroLynx add $28.00. Specify # of wires (4, 6, 8, 12).

ElectroLynx As part of their promise to provide innovative, fast and effective, and higher securitysolutions to their customers, ASSA ABLOY Group companies offer ElectroLynx , auniversal quick-connect system that simplifies the electrification of the door opening.

ElectroLynx is a registered trademark of ASSA ABLOY, Inc.



50/140

50

Options on page 53



Center Hung Pivot Sets

Center Hung Pivot Sets


127-3/4 Center Hung side jamb attached (includes 320top pivot) $259.00

128-3/4 Center Hung (includes 320 top pivot) $259.00

370 Center Hung (includes 340 top pivot) $383.00

117-3/4 Center Hung (includes 340 top pivot) $788.00

H117-3/4 Center Hung for doors 2" or greater (includes H340 top pivot) $1,924.00

H117-3/4 587 Center Hung for doors 1-3/4 (includes H340 top pivot) $1,924.00

178 Patch fitting pivot (includes 7494 top pivot) $563.00

176 Center Hung Light Duty Pivot $266.00


P i v o

t s &

P i v o

t S e

t s



51/140

51


Center Hung Top PivotsOptions on page 53



320 Center Hung $129.00

340 Center Hung $122.00

H340 Center Hung $397.00

345 Center Hung long throw pivot pin $397.00

H345 Center Hung long throw pivot pin $665.00

340 x AP3 Center Hung gate pivot $374.00

320 x 102 Center Hung for deep reveal(No finish plate included) $243.00

340 x 102 Center Hung for deep reveal(No finish plate included) $243.00

Center Hung Top Pivots




52/140

52


Electrified Center Hung Top Pivots


Specify # of wires (4,6,8,12)ElectroLynx add $28.00

Electrified Center Hung Top Pivots


EH340 Center Hung Heavy Duty for Power Transfer Top Pivot $533.00

EH345 Center Hung Longer Throw Pin Heavy Duty for TallerDoors for Power Transfer $909.00

CS340Center Hung Heavy Duty for Door Monitoring TopPivotElectroLynx not available

$583.00

CS345Center Hung Longer Throw Heavy Duty for TallerDoors for MonitoringElectroLynx not available

$909.00


P i v o

t s &

P i v o

t S e

t s

ElectroLynx As part of their promise to provide innovative, fast and effective, and higher securitysolutions to their customers, ASSA ABLOY Group companies offer ElectroLynx , auniversal quick-connect system that simplifies the electrification of the door opening.

ElectroLynx is a registered trademark of ASSA ABLOY, Inc.



53/140

53


Options

Accessories How To Order

Suffix Description Price

Ext Spdl To accommodate special floor conditions, the spindle can be ordered in 1/2"increments up to and including 2". Pivots must be ordered with longer spindle.Extended spindles for 117-1/4, 117, 147, 547,195, 127-3/4, 128-3/4, 370

$49.00

Extended spindles for 117-1/2, L117, 117-3/4, H117-3/4 and H117-3/4 x 587 $89.00

Longer Pivot Pin For top pivots with special ceiling condition, longer pins are available in 1/4 inchincrements up to 3/4 longer. Not available for electrified pivots Add $35.00

Torx

Security ScrewsNot available for center hung models

Pivot Set Add $175.00Intermediate Pivots Add $115.00

SPLO Special layout that may require special templating and/or productsExcluded from buyingprograms - contactfactory for pricing

Quick Reference Options

How To Order

FPrefix

L147Model

x 2-1/4" DoorSuffix

x RHHand

x 626Finish

F Fire RatedDoors

117-1/4117173147L147547165195117-1-1/2L117127-3/4128-3/4370117-3/4H117-3/4178176

1-1/2OS 1-1/2" Offset2"2-1/4" Door Thickness2-1/2" L Series Product Only3"587 H Arm (H117-3/4)Ext Spdl Extended Spindle-20 20 Minute labelLTP Less Top Pivot

# of Wires for ElectrifiedProduct

TORX Security Screws(Offset Only)

SPLO# Special Layout

Blank (CenterHung)

RH RightLH Left

605 Bright Brass606 Satin Brass611 Bright Bronze612 Satin Bronze613 Dark Bronze613E Dark Oxidized Satin Bronze -

Equivalent618 Bright Nickel619 Satin Nickel622 Flat Black625 Bright Chrome626 Satin Chrome689 Sprayed Aluminum690 Sprayed Dark Bronze691 Sprayed Light Bronze696 Sprayed Brass


Accessories


10600 Single Roller Caster $607.00

10602 Double Roller Caster $909.00

10600-025 for 1060010600-028 for 10602

Hollow Metal Reinforced Plate $183.00

10600-019 End Cap $24.00

2604

2608 for 180, H340and H345 Pivot Alignment Tool $89.00

}



54/140


08.Checkmate.Nov2014:RixsonPriceBook_Front.qxd 9/2/14 2:21 PM Page 54


55/140

55

* Butt hung only ** 652 Not available in multi-function models **Pricing for Offset 1-3/4 thick doors hung on standard 4-1/2 x 4-1/2 butts or 3/4 offset pivots. For all other hanging means or doorthicknesses, consult factory. Prices will be affected and will not carr y any buy program or quote discounting.

Checkmate Stops a

Rixson Price Book November 2014

Documents

Transcript of Rixson Price Book November 2014