NIRCam: Wavefronts, Images, and Science Marcia Rieke NIRCam PI STScI June 7, 2011.
Rieke/TOV Drum Closures - SeekPartfile.seekpart.com/keywordpdf/2010/12/31/2010123118952514.pdf ·...
Transcript of Rieke/TOV Drum Closures - SeekPartfile.seekpart.com/keywordpdf/2010/12/31/2010123118952514.pdf ·...
DrumCatalog
RIEKE,® VISEGRIP,® POLYGRIP,® POLY-VISEGRIP,® TAMPER-LOC,® DAPON,®POLYSEAL,® VISECAR® and SAFESEAL®are all federally registered trademarks ofRieke Corporation.
Rieke Packaging Systems,™ TITEGRIP™ andLEVER-LOC™ are all trademarks of RiekeCorporation.
A Fully Integrated Response to Your Global Packaging Needs
Rieke Packaging
Systems is committed
to being an innovative,
world class manufac-
turer of closures and
dispensing systems for
the global market.
Our success is measured
by customer appraisal
of our continuous
improvement, service
and value manifested
in the products we
provide.
Table of Contents
Page
The Rieke/TOV Drum Closure System ................................................................. 3
PART I—Closures for Standard 15-, 30- and 55-Gallon DrumsThe VISEGRIP® Plug, Flange and Cap Seal Closure System ............................ 4
Closures for Steel DrumsSteel Plugs ........................................................................................... 5
VISEGRIP and TITEGRIP™Specialty Steel Plugs ............................................................................. 6Synthetic Plugs ..................................................................................... 7
PPN Fusible ClosuresPOLY-VISEGRIP® PlugsPOLYGRIP® Closures and Vents
Flanges ............................................................................................ 10Steel FlangesVISEGRIP Nylon Flanges
Gaskets ............................................................................................ 12Tamper-Evident Cap Seals ..................................................................... 14
Closures for Plastic DrumsPlugs ............................................................................................ 16
POLY-VISEGRIP PlugsTAMPER-LOC® Closure System
Flanges, Gaskets and Cap Seals .............................................................. 19Vented Closures
Specialty Steel Electro-Zinc Plated ......................................................... 20Micro-Porous Vents .............................................................................. 21Reversible Vents .................................................................................. 22
ToolsManual Crimping Tools ......................................................................... 23Power Crimping Tools ........................................................................... 23Combination Wrenches ......................................................................... 24Preset Torque Wrenches ........................................................................ 24Wrench Heads ..................................................................................... 25Removal Tools ..................................................................................... 25
PART II—LEVER-LOC™ Lever Rings for Industrial Open Head ContainersThe LEVER-LOC Closure System .............................................................. 26LEVER-LOC Lever Models ....................................................................... 27Seals ............................................................................................ 29Profiles ............................................................................................ 30
Other Available Packaging Systems .................................................................. 31
2
The Rieke/TOV Drum Closure System
CAUTION: Prior to specifying your Rieke Packaging Systems products, always determine if they are
compatible with your materials and packaging environment. Factors such as temperature, pressure and
chemical composition may impact your requirements. Failure to follow these instructions can create
a hazardous condition.
Innovators of the
first mechanically
inserted plug and
flange assembly for
drums, Rieke Packaging
Systems is now the
world leader in
closures for industrial
drums and open head
containers.
From the fundamental
VISEGRIP® plug and
flange to the custom-
designed LEVER-LOC™
ring, Rieke Packaging
Systems drum closures
allow for easy, efficient
application and
reliable sealing power.
Call (260) 925-3700 or visit www.riekepackaging.com 3
4
The VISEGRIP® Plug, Flange andCap Seal Closure System
Fundamental to the Rieke/TOV drum closure lineis the design of the VISEGRIP—the strongest,most dependable closure to seal a drum.
The flange has a series of serrations that lockinto the drum material upon insertion.
When the plug is torqued into the flange, itseals at the most critical point—the flat surfaceof the drum head—in effect tightening theplug and gasket in a vise-like grip.
A cap seal can then be added for additionalprotection against tampering and leakage.
Closures for Standard 15-, 30- and 55-Gallon Drums
Call (260) 925-3700 or visit www.riekepackaging.com 5
T-200Size—3/4" (20mm)
T-250Size—2" (50mm)
Closures for Steel Drums
Steel Plugs
Made from premium deep-drawing quality steel,VISEGRIP and TITEGRIP plugs are noted forperfect balance, uniform dimensions and ahigh-quality finish.
VISEGRIP® Plugs■ Rounded bottoms make thread engagement
easier.■ Hexagonal shoulder makes them easy to open
without wrenches.■ Wide shoulders and concentric sealing beads
lock gaskets securely in place.■ Electro-zinc plated. Also available in
unplated steel or lined with commercialcoatings.
S-200Size—3/4" (20mm)
S-250Size—2" (50mm)
TITEGRIP™ Plugs■ Threads are rolled instead of cut—creates a
smoother thread connection and reduces thechance of contaminating drum contents withmetal burrs or shavings.
■ Electro-zinc plated. Also available inunplated steel or lined with commercialcoatings.
■ Utilizes standard insertion tools, wrenchesand seals.
6
Specialty Steel Plugs
Rieke Packaging Systems offers an assortmentof specialty steel plugs for unique drum appli-cations. Just like the standard VISEGRIP variety,each of these plugs is made from premiumdeep-drawing quality steel and serves as anextremely tight closure. They’re typicallyelectro-zinc plated, but they’re also available inunplated steel or lined with commercial coatings.
S-210Size—1-1/2" (38mm)Distinctive for its flatheadsurface; no crossbar ordome feature.
S-210-3Size—1-1/2" (38mm)Agitator plug withhexagonal perimeter—When sealed, the domesecures the drum’sagitator rod.
S-210-4Size—1-1/2" (38mm)Agitator plug withrounded perimeter—Inaddition to a dome thatsecures a drum’s agitatorrod, it features externalears for ease in open/close operations.
S-220Size—2" (50mm)Plug for tote tanks—Features a flatheadsurface; no crossbar.
Agitator Bracket Assembly
Rieke Packaging Systems offers this uniquebracket assembly to simplify the perma-nent installation of an agitator in a drum.With this unit in place, high speed drummanufacturing processes do not have toslow down for welding operations.
The assembly is a fixed part of a 1-1/2"(38mm) VISEGRIP flange, making it aninseparable part of the drum head uponinsertion.
D-200 AgitatorBracket AssemblySupplied plated unlessotherwise specified.
S-220-CSize—2" (50mm)Combination plug—Within its 2" frame is a3/4" center opening.
S-250-TFCSize—2" (50mm)Incorporates a threadedfaucet carrier featurethat accepts a RIEKE3/4" FLO-RITE faucet(see Rieke/Englasscatalog).
Call (260) 925-3700 or visit www.riekepackaging.com 7
Note: All models incorporate a chemically resistant polypropyleneand/or polyethylene material unless otherwise indicated.
VISEGRIP SeriesFusible Closures
PPN-61Size—2" (50mm)Thread—NPSTorque Requirements—20 ft.-lbs.
PPN-21Size—3/4" (20mm)Thread—NPSTorque Requirements—9 ft.-lbs.
Note: The PFA-62-3 isa 2" (50mm) fusibleclosure for IBC and totetanks. Refer to page 9.
TITEGRIP SeriesFusible Closures
PPN-71Size—2" (50mm)Thread—NPS and BSPTorque Requirements—20 ft.-lbs.
PPN-31Size—3/4" (20mm)Thread—NPS and BSPTorque Requirements—9 ft.-lbs.
Synthetic Plugs
Synthetic Plugs
PPN Fusible Closures
The unique design of Rieke Packaging Systems’PPN series makes it the ideal closure for drumscontaining combustible materials. Its reinforcednylon material provides a reliable seal, butwhen exposed to extreme heat, melts away inthe center of the closure to allow volatile gasesto vent, thus reducing the risk of explosion.
VISEGRIP Series:■ Meets UN Packing Group I, II, and III
performance requirements with elastomericgaskets.
■ Meets UN Packing Group II and IIIperformance requirements with poly-irradiated gaskets.
■ Features a nylon material compliant with FDArequirements.
■ Is Factory Mutual approved to meetprotection guidelines in NFPA 30, chapter 4,sections 4-8.
TITEGRIP Series:■ Meets UN Packing Group I, II, and III
performance requirements with poly-irradiated and elastomeric gaskets.
■ Features a nylon material compliant with FDArequirements.
■ Is Factory Mutual approved to meetprotection guidelines in NFPA 30, chapter 4,sections 4-8.
DANGER:The end user is strongly advised to storedrums in an upright position at all times.The end user is warned to keep a safedistance from a drum that is in a fire orsubject to very high heat.
8
PPA-11Size—3/4" (20mm)
PPA-51Size—2" (50mm)
PPA-53 Top ViewCombination 2" (50mm)plug with removablediaphragm and 3/4"(20mm) opening forFLO-RITE faucets. (SeeRieke/Englass catalog.)
POLY-VISEGRIP® Plugs
The POLY-VISEGRIP trio of closures is speciallydesigned for use in lined containers. With ahigh degree of chemical resistance and acapacity to withstand extremely cold tempera-tures, these plugs perform under a widearray of storage and transport conditions.
POLY-VISEGRIP closures:■ Require no gasket.■ Fit NPS threads.■ Can be cap sealed with a plastic SAFESEAL®
or metal VISEGRIP cap seal (page 14) usingstandard crimping equipment.
■ Meet FDA and UN Packaging Standards.■ Are available in High-Impact Polypropylene,
or High-Density Polyethylene (HDPE) with aUV inhibitor.
PPA-53 Bottom View
Note: All models incorporate a chemically resistant polypropyleneand/or polyethylene material unless otherwise indicated.
Call (260) 925-3700 or visit www.riekepackaging.com 9
PV-20-52■ For lined and unlined
containers■ Natural color■ Attached cap for
resealing
POLYGRIP® Closures and Vents
ClosuresIdeal for packaged products compatible withpolyethylene, the secure POLYGRIP closureassembly features a unique tamper-evidentdesign.
The flange features a molded, prescoreddiaphragm that forms a hermetic seal betweenthe closure and the container. The diaphragmfeatures a convenient pull ring for easy removal.Once the diaphragm is torn away, the plugcan be replaced to reseal the container.Incorporated in the plug is a 3/4" (20mm)opening for a FLO-RITE faucet (see Rieke/Englasscatalog).
PFA-61■ 2" (50mm) flange and
plug assembly for linedcontainers
■ Natural color
PFA-71■ 2" (50mm) flange and
crimping ring only forcoated containers
Also available:PFA-62■ 2" (50mm) flange and
plug assembly forunlined containers andcontainers with a bagliner or sealing disc
■ Gray color
PFA-72■ 2" (50mm) flange and
crimping ring only forunlined containers andcontainers with a bagliner or sealing disc
PFA-62-3■ 2" (50mm) fusible
closure for IBC and totetanks (for other fusibleclosures, refer to page 7)
VentsPerfect for lined containers, POLYGRIP ventsprovide a unique dispensing and resealingfeature when used in combination with thePOLYGRIP closure.
Like their POLYGRIP counterparts, these ventsare tamper-evident due to a molded, prescoreddiaphragm. Once the diaphragm is removedusing the convenient pull ring, the ventingcapability allows for easy dispensing withoutsurging.
10
TITEGRIP Steel Flanges
Like its counterpart, the TITEGRIP plug, theseflanges feature threads that are rolled ratherthan cut. This facilitates a smoother threadconnection and greatly reduces the chance ofcontaminating the drum contents with burrs orshavings.
TITEGRIP flanges:■ Standard electro-zinc plated. Also
available in unplated steel, or lined withcommercial coatings.
■ Non-machined, cold-formed neck forimproved strength.
Flanges
VISEGRIP Steel Flanges
The VISEGRIP steel flange features a uniquedesign which permits it to become an insepa-rable part of the drum head. A key to theeffectiveness of the VISEGRIP flange is a seriesof serrations that lock it into the drum metalwhen inserted.
Incorporated into the flange is a sealing com-pound not unlike that used by drum manufacturers.This compound broadens product compatibilityand is conducive to drum reconditioning.
Standard VISEGRIP flanges:■ Are constructed of a heavy-gauge steel.■ Feature NPS pipe threading.■ Come electro-zinc plated, but are also
available in unplated steel, or lined withcommercial coatings.
R-4Size—3/4" (20mm)
R-5Size—1-1/2" (38mm)
R-6Size—2" (50mm)
Has three holes for betterdrainability
GH4Size—3/4" (20mm)
GH6Size—2" (50mm)
Call (260) 925-3700 or visit www.riekepackaging.com 11
Note: All models incorporate a chemically resistant polypropyleneand/or polyethylene material unless otherwise indicated.
PRN-4J(used with PPN-61—see page 7)Size—3/4" (20mm)
PRN-6J(used with PPN-21—see page 7)Size—2" (50mm)
VISEGRIP Nylon Flanges—Ideal for lined steel drums
Molded of engineered nylon base plastic,these flanges combine with RIEKE nylon plugsto create a reliable seal completely safeguardedagainst corrosion. With a patented preloadon the interior outer edge, they also protectcustomer product from potential lining fractureat the closure area.
Just like VISEGRIP steel flanges, these nylonmodels also lock into the surface of the drumwith a series of serrations that practically fusethe flange and the drum together.
12
POLYSEAL® GasketsThis heavy-duty gasket ismade of polyethylene forextreme durability.
■ Will withstand amaximum oventemperature of120ºF (49°C)
GK-73Size—2" (50mm)Color—Natural
Also available:GK-71Size—3/4" (20mm)Color—Natural
GK-72Size—1-1/2" (38mm)Color—Natural
■ Irradiated heat resistantPOLYSEAL gaskets—Will withstand an oven-temperature of 350ºF(176°C) for up to15 minutes
GK-71-3Size—3/4" (20mm)Color—Natural
GK-73-3Size—2" (50mm)Color—Natural
Gaskets
Regardless of packaging conditions, RiekePackaging Systems offers a gasket capable offorming the tight seal required at the mostcritical juncture of the closure.
VISECAR® GasketsCompounded of VISECARBuna synthetic rubber,these gaskets serve as theRieke standard.
■ Will withstand an oventemperature of 450ºF(232°C) for up to 20minutes
GK-43Size—2" (50mm)Color—Black
Also available:GK-41Size—3/4" (20mm)Color—Black
GK-41WSize—3/4" (20mm)Color—White
GK-42Size—1-1/2" (38mm)Color—Black
GK-43WSize—2" (50mm)Color—White
Call (260) 925-3700 or visit www.riekepackaging.com 13
DAPON® GasketsDAPON is a uniquelyformulated white syn-thetic rubber. It is highlycompatible with manyspecialty chemicalproducts and features asuperior oil resistance.
■ Will withstand an oventemperature of 450ºF(232°C) for 20 minutes
GK-83WSize—2" (50mm)Color—White
Also available:GK-81WSize—3/4" (20mm)Color—White
EPDM GasketsThese gaskets are spe-cially designed with anethylene propyleneterpolymer material,making them compatiblewith a wide range ofchemical products.
■ Will withstand an oventemperature of 450ºF(232°C) for 20 minutes
GK-93Size—2" (50mm)Color—Black
Also available:GK-91Size—3/4" (20mm)Color—Black
GK-91WSize—3/4" (20mm)Color—White
GK-92Size—1-1/2" (38mm)Color—Black
GK-92WSize—1-1/2" (38mm)Color—White
GK-93WSize—2" (50mm)Color—White
GK-97W—for 2” PPA-57 NPSthreaded plugs (page 17)Size—2" (50mm)Color—White
GK-96W—for 2” PPA-57-B-5buttress threaded plugs(page 16)Size—2" (50mm)Color—White
14
Tamper-Evident Cap Seals
For added protection against tampering andleakage, Rieke Packaging Systems offers achoice of cap seals as a final drum closurecomponent. All cap seal designs are FDAapproved and suitable for virtually anypackaged product.
VISEGRIP MetalCap Seals■ Feature a scored
breakaway seal in thesurface of the cap
■ Require only a standardVISEGRIP crimpingtool to be applied
■ Can pass 15 psipressure
X-3 Metal Cap SealSize—2" (50mm)
Also available:X-1 Metal Cap SealSize—3/4" (20mm)
TITEGRIP MetalCap Seals■ Feature a scored
breakaway seal in thesurface of the cap
■ Require only a standardTITEGRIP crimpingtool to be applied
■ Can act as a secondaryseal
XT-3 Metal Cap SealSize—2" (50mm)
Also available:XT-1 Metal Cap SealSize—3/4" (20mm)
SAFESEAL PlasticCap Seals■ Feature a scored tin
plate or aluminumbreakaway seal aroundthe rim
■ Have a low densitypolyethylene cap
■ Require only a standardVISEGRIP crimping toolto be applied
■ Can pass 15psi pressure
PX-3 Plastic CapSealSize—2" (50mm)
Also available:PX-1 Plastic CapSealSize—3/4" (20mm)
TITEGRIP PlasticCap Seals■ Feature a scored tin
plate or aluminumbreakaway seal aroundthe rim
■ Have a low densitypolyethylene cap
■ Require only a standardTITEGRIP crimping toolto be applied
■ Can act as a secondaryseal
PXT-3 Plastic CapSealSize—2" (50mm)
Also available:PXT-1 Plastic CapSealSize—3/4" (20mm)
Call (260) 925-3700 or visit www.riekepackaging.com 15
All Plastic CapSeals■ Feature a scored
breakaway plastic sealring made of highdensity polyethylene
■ Can be applied withouttools
■ Are 100% recyclable
AP-3-5000 AllPlastic Cap SealSize—2" (50mm)
Also available:AP-1-5000 AllPlastic Cap SealSize—3/4" (20mm)
Tamper-Evident Cap Seals
For added protection against tampering andleakage, Rieke Packaging Systems offers achoice of cap seals as a final drum closurecomponent. All cap seal designs are FDAapproved and suitable for virtually anypackaged product.
TITEGRIP All PlasticCap Seals■ Feature a scored
breakaway plastic sealring made of highdensity polyethylene
■ Can be applied withouttools
■ Are 100% recyclable
APT-3-5000 AllPlastic Cap SealSize—2" (50mm)
Also available:APT-1-5000 AllPlastic Cap SealSize—3/4" (20mm)
TE56B4Plastic Cap SealSize—56mm
Rieke Packaging Systemshas the capabilities toimprint its cap seals witha graphic image. The flatsurface is perfect for atrademark or logotype tohelp build brand identity.Or, it can serve to deliveran important “caution” orinstructional message.
16
Buttress Thread PlugsRequiring a Gasket:
PPA-57-B-5Top View
PPA-57-B-5Bottom ViewIncorporates a 3/4"(20mm) threaded openingwith a knockout diaphragmand an optional snap-fitfaucet carrier for theFLO-RITE faucet (seeRieke/Englass catalog).
Satisfies 178.605 PKGgroup hydrostatic testingrequirements.
Size—2" (50mm)
Color—Natural
Material—HDPE orpolypropylene copolymer
Recommended Gasket—GK-96W (page 13)
Closures for Plastic Drums
Plugs
Rieke Packaging Systems offers a comprehen-sive line of plastic plugs specifically designedfor plastic containers. Maintaining the samefunctional characteristics of the original steelVISEGRIP plugs, these closures apply an equallyreliable seal for a wide range of applications.
Buttress Thread PlugsRequiring a Gasket:
6N56B4Available with a 3/4"(20mm) threaded openingwith a knockout diaphragm.Satisfies 178.605 PKGgroup hydrostatic testingrequirements.
Size—56mm (56x4standard European size)
Color—White
Material—HDPE orpolypropylene copolymer
Recommended Gasket—GK-956
Closures for Plastic Drums
POLY-VISEGRIP Plugs forPoly Drums■ Constructed of either a high-density
polyethylene (HDPE) with a UV inhibitoror a polypropylene copolymer.
■ Meet FDA and UN Packaging Standards■ Can be cap sealed with a plastic SAFESEAL
or metal VISEGRIP cap seal (page 14) usingstandard crimping equipment.
POLY-TITEGRIP Plugs forPoly Drums■ Constructed of either a high-density
polyethylene (HDPE) with a UV inhibitoror a polypropylene copolymer.
■ Meet FDA and UN Packaging Standards■ Can be cap sealed with the All Plastic
TITEGRIP TE56B4 capseal (page 15)■ Standard European 56mm plug meets CEN
requirements.■ Standard 6N lug configuration
Call (260) 925-3700 or visit www.riekepackaging.com 17
National Pipe Thread(NPS) Plugs Requiring aGasket:
To achieve accuratesealing at 20 ft.-lbs.torque, a Rieke 20/9preset torque wrench(page 24) is recommended.
PPA-56Incorporates a 3/4"(20mm) threaded openingwith a faucet carrier.Size—2" (50mm)
Color—Natural
Material—HDPE(engineered reinforced)
Recommended Gasket—GK-93 or GK-93W (page 13)
PPA-57Incorporates “easy start”threads for quickerengagement.
Satisfies 178.605 PKGgroup hydrostatic testingrequirements.
Promotes reconditioningand reuse of the container.
Size—2" (50mm)
Color—Natural
Material—HDPE(engineered reinforced) orcopolymer
Recommended Gasket—GK-97W (page 13)
National Pipe Thread(NPS) Plugs—GasketRecommended:
PPA-11 (also page 8)Can be used without agasket.
Size—3/4" (20mm)
Color—Natural
Material—HDPE orcopolymer
Recommended Gasket—GK-91 or GK-91W (page 13)
PPA-10-2Specialty PlugNo gasket required.
Size—3/4" (20mm)
Color—Natural
Material—HDPE
Also available (see page 8):PPA-51Can be used without agasket.
Size—2" (50mm)
Color—Natural
Material—HDPE
Recommended Gasket—GK-93 or GK-93W (page 13)
PPA-53Same as PPA-51, but hasa 3/4" (20mm) threadedopening with a faucetcarrier.
Note: All models incorporate a chemically resistant polypropyleneand/or polyethylene material unless otherwise indicated.
18
TAMPER-LOC® Closure System
As a closure system, the TAMPER-LOC incorporatesa plug and an external, sonic-welded tamper-evident ring with ratchets. Together, these com-ponents provide the most reliable protection forplastic drums without the need for a separatetamper-evident cap seal.
The external ring features a series of ratchetsthat correspond and lock up with another seriesof ratchets in the drum opening, effectivelypreventing plug backoff. When the drum isopened for the first time, using a standardbung wrench, the external ring is broken andremoved from the plug.
Designed for ease of inspection of propertorque before shipment, as well as immediateevidence of any tampering before opening.
As an added feature, the ring can be coloredand/or embossed with your company logotype.
Note:■ Proper torque is 25 ft.-lbs. To ensure
accurate sealing, the W-126PT-04-25 presettorque wrench (page 24) is recommended.
■ Optional PX-4 dust caps are recommended toprotect drums from foreign matter prior tofilling. Ask your Rieke Packaging Systemsrepresentative.
PPA-57-TTop ViewSize—2" (50mm)
Thread—NPS
Color—Natural
PPA-57-TBottom View
Also available:PPA-57-B-5-TSize—2" (50mm)
Thread—Buttress
Color—Natural
Call (260) 925-3700 or visit www.riekepackaging.com 19
Note: All models incorporate a chemically resistant polypropyleneand/or polyethylene material unless otherwise indicated.
PDF-4Size—3/4" (20mm)
Thread—NPS
PDF-6Size—2" (50mm)
Thread—NPS
PDF-7Size—2" (50mm)
Thread—Buttress
(Replaceable) Flanges
These flanges are specially designed for usewith plastic, reusable drums. They are moldedof high density polyethylene (HDPE) andreinforced with fiberglass and UV stabilizers,for exceptional durability.
Each of the three flanges:■ Can be removed and replaced when needed,
extending the life and usability of the drum.■ Reduces ovalization on new and reconditioned
drums.■ When used with a POLY-VISEGRIP plug
(page 8), can be cap sealed for tamper-evident protection.
Gaskets
Same as those used with steel drums. Refer topages 12-13.
Seals
Plastic drums use SAFESEAL plastic andVISEGRIP metal cap seals. Refer to page 14.
20
S-200-1814Reversible SteelVentA reversible ball valve atthe base of this closureallows for venting. It’sadaptable for bothpressure and vacuumrelief depending onpackaging requirements.
S-200-1814PPressure ReliefSize—3/4" (20mm)
S-200-1814VVacuum ReliefSize—3/4" (20mm)
Vented Closures
Specialty Steel Electro-Zinc Plated
Rieke Packaging Systems offers several pressure-relief plugs forged out of heavy gauge steel forexceptional material strength.
S-220-2 PressureRelieving PlugWhile applying thedistinctive sealingqualities of the funda-mental VISEGRIP, Rieke’sS-220-2 also serves as thedrum’s relief valve forpackaged hazardousmaterials.
■ Prevents buildup ofinternal pressures byventing volatile gases.
■ Vents at internalpressures of 13 to15 psi.
■ Reseals at approximately8 psi.
■ Plugs with differentventing pressures areavailable.
Note: To ensure properoperation, this plug mustbe chemically compatiblewith—and located abovethe liquid level of—thedrum contents.
S-220-2 Top View
S-220-2Bottom ViewSize—2" (50mm)
Vented Closures
Call (260) 925-3700 or visit www.riekepackaging.com 21
A micro-porous vent canbe incorporated into anyof the following plugs(including that which isshown):
PPA-10-2
PPA-11
PPA-57
PPA-57-B-5
VISEGRIP SeriesPPN 61 and PPN 21
TITEGRIP SeriesPPN 71 and PPN 31
TITEGRIP PPN-32Nylon closure (seen onthe following page).
Note: Add the “TFE” suffixto the part number whenspecifying a micro-porousvent.
Micro-Porous Vents
Many of Rieke Packaging Systems’ plastic closurescan be equipped with a Micro-Porous Gauze Ventthat allows two-way venting for either pressureor vacuum relief.
PPA-51-TFETop ViewSize—2" (50mm)
PPA-51-TFEBottom View
When using these vents:■ Be sure to allow for adequate head space
(outage) in the container. Failure to do socan plug the vent or cause leakage.
■ The container should be transported andstored in an upright position.
Note: All models incorporate a chemically resistant polypropyleneand/or polyethylene material unless otherwise indicated.
22
A reversible vent, pressureand/or vacuum, can beincorporated into any ofthe following plugs,unless otherwise specified(including those whichare shown).
PPA-53*PPA-57
VISEGRIP SeriesPPN-61 and PPN-21
Reversible vents inVISEGRIP steel plugs:S-200S-220
Reversible vents inTITEGRIP nylon closures:PPN-32Size—3/4" (20mm)This nylon plug isspecially designed toaccommodate our PV-21vent.
Note: Add the “PV-21P”(pressure) or “PV-21V”(vacuum) suffix to thepart number whenspecifying a reversiblevent.
Reversible Vents
Chemical manufacturers appreciate the designcapabilities of Rieke Packaging Systems’reversible vents. Formulated with two specialsynthetic materials (Buna and EPDM), thesevents meet compatibility requirements whileaccommodating pressure and/or vacuum relief.
Cutaway of S-200PV-21Pshowing the pressure relief vent
PPA-11-PV-21V*Size—3/4" (20mm)
PPA-51-PV-21VSize—2" (50mm)
*Available in vacuum only.
Call (260) 925-3700 or visit www.riekepackaging.com 23
G-10For use with 2" (50mm)VISEGRIP metal andSAFESEAL plastic capseals.
G-30For use with 3/4" (20mm)VISEGRIP metal andSAFESEAL plastic capseals.
Note: The G-10 and G-30can be used on pailsusing VISEGRIP drumclosures.
PF-40For use with POLYGRIPclosures.
Note: The PF-40 canbe used to attach thePFA-62-3 (page 9) to totebins.
Manual Crimping Tools
Rieke Packaging Systems’ manual crimping toolsare easy to use and versatile. They apply bothplastic and metal cap seals in one easy motion,and—due to a built-in, automatic compensator—can be used with drum stock ranging from24 to 16 gauge, regardless of thickness.
Tools
AirmaticThis air-operated powertool can be suspended bycounterbalance toaccommodate closureinsertion on movingfilling lines.
IA-G-10For use with 2" (50mm)cap seals.
IA-G-30For use with 3/4" (20mm)cap seals.
Power Crimping Tools
For high-speed operation, Rieke PackagingSystems’ power crimping tools perform quicklyand efficiently.
24
W-2682" and 3/4" prong andsocket type
Also available:W-268S2" and 3/4" prong andsocket type—sparkless
Combination Wrenches forVISEGRIP plugs
Each of these wrenches features a combinationhead for use with two different sizes of clo-sures. Sparkless types are available for use ondrums containing combustible materials.
W-167Socket type fits 3/4"(20mm) and 2" (50mm)steel plugs.
W-168Prong and socket type fits3/4" (20mm) and 2"(50mm) steel and plasticplugs.
Also available:W-164S1-1/2" and 3/4" sockettype—sparkless
W-167S2" and 3/4" sockettype—sparkless
W-169Universal drum opener
W-168S2" and 3/4" prong andsocket type—sparkless
W-180S2", 1-1/2" and 3/4"prong and socket type—sparkless
Combination Wrenches forTITEGRIP plugs
Preset Torque Wrenches forVISEGRIP plugs
These wrenches are set to automatically applyproper torque to the appropriate closure, takingthe guesswork out of tightening.
W-168PTProng and socket type fits3/4" (20mm) and 2" (50mm)steel and plastic plugs.Color coded for thefollowing ft./lbs. torquesettings:
30/15—red (for use withVISECAR or DAPONgaskets)40/20—blue (for use withPOLYSEAL gaskets)20/9—yellow (for usewith POLY-VISEGRIPplugs)
Also available:W-126PT-04 forTAMPER-LOC closuresystem (page 18)2" prong type with spinnerSetting—25 lbs.
W-126PT2" prong type withspinnerSetting—20, 30 or 40 lbs.
W-167PT2" and 3/4" combinationsocket typeSetting—30/15 or 40/20lbs.
W-168SPTSparkless version ofW-168PT
W-167SPTSparkless version ofW-167PT
Call (260) 925-3700 or visit www.riekepackaging.com 25
Preset Torque Wrenches forTITEGRIP plugs
Wrench Heads
W-268PT TOV2" (50mm) and 3/4"(20mm) combinationprong and socket typeSetting—20/9, 30/15 or40/20 lbs.
Also available:W-268SPT TOVSparkless version ofW-268PT TOV
Spinner WrenchesThese tools are specificallydesigned to quicklytighten and removeVISEGRIP plugs.
W-126For use with 2" plugs(prong type).
Also available:W-126S—sparkless(2” prong type)
W-127For use with 3/4" plugs.
For Steel Plugs:W-1002" (50mm) prong typewith 3/4" (20mm) drivehole
W-179-1“Snap-on” 2" (50mm) and3/4" (20mm) combinationwith 1/2" (12.7mm) drive.Specially made of toolsteel
Also available:W-993/4" (20mm) socket typewith 3/4" drive hole
W-170S2" (50mm) and 3/4"(20mm) combination with3/4" drive hole—sparkless
For Plastic Plugs:W-1043/4" (20mm) socket type
W-1002" (50mm) socket typewith 3/4” (20mm) drivehole
26
When closed, the ringoverlaps—eliminatinggaps—to ensure itssealing power completelyencircles the lid.
The unique lever designis as dependable as a boltring, and yet much easierto apply and remove overand over again.
For exceptional strength,each ring is the productof welded steelconstruction, and can begalvanized or coated withepoxy paint.
The LEVER-LOC Closure System
As steadfast as it is easy to use, LEVER-LOC isbecoming the ring closure of choice for compa-nies that package in open-head containers.Successful in the most trying hydrostatic anddrop tests, LEVER-LOC consistently meets UNand DOT Packaging Standards for regulatedmaterials.
Custom sizing and profiling capabilities produce aLEVER-LOC ring that precisely fits any given container,from one gallon size up through IBC tanks.
LEVER-LOC™ Lever Rings for Industrial Open Head ContainersLEVER-LOC™ Lever Rings for Industrial Open Head Containers
Call (260) 925-3700 or visit www.riekepackaging.com 27
LEVER-LOC Lever Models
The lever model you choose will depend on twoprimary application factors:
■ Packaged Contents—Just as the contentswill determine how robust the containerneeds to be, they will also determine thenecessary gauge or performance strength ofthe lever. Regulated materials requiring amore reliable drum will likewise require amore reliable lever of a higher gauge andsteel thickness.
■ Dimensions of Container—Larger levers aredesigned for larger container diameters inorder to apply the required pressure whenclosed. Other specifications, such as theradius and throw of the lever handle, varywith openings and lids to maintain the easeof applying and removing the ring.
The current selection of lever models is exten-sive and diverse due largely to the fact RiekePackaging Systems will often alter the designof an existing model to serve a uniquecustomer need.
Please review the following pages to find thebase models appropriate for the size of yourcontainer. Then call us at 260-925-3700 todiscuss other design features important for yourapplication.
28
Standard Lever Models for Drums
Easy to use, yet virtually unbreakable in perfor-mance tests, each LEVER-LOC lever features:
■ International design for a worldwide market■ All stamped steel construction—no wires■ Solid—not hollow—rivets■ A design intended for welding onto the ring■ A low profile that makes it easier to palletize
and store drums close together
T85For 55-gallon (208 litre)plastic open head drums
BRGFor 55-gallon (208 litre)steel open head drums
Replaces a 12-gaugebolt ring
An integral swivel sealis available if needed
T60For 30-gallon (113 litre)plastic open head drums
T42For open head fiber drums(any size)
T85 w/Safety LatchFor 55-gallon (208 litre)plastic open head drums
FPO
Call (260) 925-3700 or visit www.riekepackaging.com 29
Seals
Every LEVER-LOC lever is designed with a slotthat allows for the insertion of a tamper-evident seal tab.
Plastic Seals■ Offer a more economical
but equally effectivesolution when comparedto steel seals.
■ Not reusable—plastic isbroken when containeris opened.
Specialty Lever Models
For Containers With Undefined OpenHeads
Locking Ring in Metal StrapWelded to a metal strap, this lever locks down containerswith odd-shaped openings or collapsible material.
Steel Seals■ Made of a galvanized
steel.
30
Profiles
Below are diagrams of some of the industry’smost common locking ring profiles for openhead containers. If your container rim does notmatch one of these, Rieke Packaging Systemswill custom fit a LEVER-LOC ring that does.
24º
5.4mm
5.8mm
6mm
15º
7mm
15º
10.2mm
15º
15º
6.8mm
7mm
15º
25º
7mm
9.5mm
9.5mm
9.8mm
11.5mm
14mm
10º
10º
10º
15.7mm
5º
15º
Light Type
Light Type
Light Type
Medium Type
Medium Type
Heavy Type
Call (260) 925-3700 or visit www.riekepackaging.com 31
The Rieke/Englass DispensingSystem
From fine mists, to creams and gels, to indus-trial chemicals, Rieke Packaging Systems offersa diverse line of easy-to-use pumps sprayersand faucets for a wide range of viscosities.
Ask your Rieke Packaging Systems representativefor a catalog.
Other Available Packaging Systems
The Rieke/Stolz Pail ClosureSystem
These secure closures are highly recognized fortheir convenient child-resistant, tamper-evidentdesigns and exceptional pouring capabilities.
Ask your Rieke Packaging Systems representativefor a catalog.
Call us at 260-925-3700 to talk about yourunique packaging issue. With complete designand development capabilities, as well as serviceand application support, Rieke PackagingSystems will adapt an existing product orcreate a new one to satisfy your requirements.
Rieke Packaging Systems500 West Seventh StreetAuburn, Indiana 46706(260) 925-3700Fax (260) 925-2493email [email protected]
Other Available Packaging Systems
Rieke Corporation500 West Seventh StreetAuburn, Indiana 46706Phone No. +1 (260) 925-3700Fax No. +1 (260) 925-2493E-mail [email protected]
Rieke Corporation (S) Pte LtdNo. 16 Ayer Rajah Crescent#04-02 Tempco TechnominiumSingapore 139965Phone No. +65 6872-5480Fax No. +65 6872-5481E-mail [email protected]
Rieke Packaging Systems AustraliaP.O. Box 4Main Street Post OfficeHealesville, Victoria3777 AustraliaPhone No. +61 35962-6340Fax No. +61 35962-6345E-mail [email protected]
Rieke de MexicoSaturno 22Nueva Industrial Vallejo07700-Mexico, D.F.Phone No. +52 (55) 5586 1200Fax No. +52 (55) 5754 7944E-mail [email protected]
Rieke Packaging Systems Brasil Ltda.Av. Bernardino de Campos,98-3rd andar Paraiso04004-040 Sao Paulo-SP BRASILPhone No. + (55) 11-3884-6238Fax No. + (55) 11-3887-3906E-mail [email protected]
Rieke Packaging Systems IbericaGuerau de Liost, 10-12P.I. Mas de les Animes43206 REUS (Tarragona) SpainPhone No. +34 (0) 977 33 26 11Fax No. +34 (0) 977 33 26 12E-mail [email protected]
Rieke Dispensing500 West Seventh StreetAuburn, Indiana 46706Phone No. +1 (260) 925-3700Fax No. +1 (260) 925-4654E-mail [email protected]
Rieke Italia S.r.L.Via Lecco, 1123868 Valmadrera (LC) ItalyPhone No. +39 0341 205411Fax No. +39 0341 581544E-mail [email protected]
Heinrich Stolz GmbHIn der Au 1357290 NeunkirchenGermanyPhone No. +49 (0) 2735-761-0Fax No. +49 (0) 2735-76123E-mail [email protected]
TOP EmballageB.P.1Z.I. Les Bruyeres4 avenue Le Verrier78191 TRAPPES Cédex FrancePhone No. +33 1 30 13 93 00Fax No. +33 1 30 66 09 10E-mail
Englass44 Scudamore RoadLeicester LE3 1UGEnglandPhone No. +44 (0) 116 233 1100Fax No. +44 (0) 116 231 2077E-mail [email protected]