RF and Microwave Productsmicrowave+2017.pdfRF and Microwave Products Trade and Company Register...
Transcript of RF and Microwave Productsmicrowave+2017.pdfRF and Microwave Products Trade and Company Register...
RF and Microwave ProductsTrade and Company Register n°753 646 405 00021 (Melun)
3 rue Paul Tavernier - 77300 Fontainebleau - France
M: +33(0)607981534
Contact: Fabrice HERY - EM: [email protected]
www.fh-microwave.com
We have an extensive design capability oriented to RF andmicrowave components and connectorized modules:› Standard products
› Custom designs based on customer requirements
Design Tools:› AWR Microwave Office for RF and microwave design
› CST for 3D EM simulation
› Modelithic for component modeling
› AutoCAD.
Modern designs based on the state-of-the-art technologies
Fulfils Industrial and/or Military Requirements
Production plant qualified to ISO-9001-2008 and EN-9100:2003
Hybrid assembly in a class 10.000 (ISO 7) clean room
Nitrogen generation
Ultrasonic cleaning
UVO (UV + Ozone) cleaning
Wire & Ribbon wedge bonding
Epoxy and Eutectic Die Attach
Parallel Gap Welding
Resistance Soldering
Iron and Hot Air and Soldering
Hermeticity on demand
Production plant qualified to ISO-9001-2008
Manual & Automatic packaging in class 10000 (ISO 7) clean room
8’’ wafer Handling Automatic Die Bonder (ASM –AD 898)
Automatic Dispenser (ASYMTEK DP3000)
In line curing process for die attached (ASM –COE 139)
Fully Automatic Ball Bonder (ASM –EAGLE 60)
Fully Automatic Wedge Bonder (H&K BONDJET 710)
Vacuum Oven (PINK VADO 100)
Manual wire bonding (TPT HB16)
Ultrasonic cleaning
Vacuum Chamber + Centrifuge
Stencil Printer
Reflow Curing Oven
Automatic die bonder Epoxy die bonding
Flip Chip Bonding
Thermocompression
Eutectic Die bonding
Silver Sintering
Multi-chip assembly and flexible NPI & handling 12’’, 8’’ wafer, waffle pack, Gelpack, tape&reel
Automatic Epoxy dispensing P/T controlled
Thin dice (<70µm) - Bond Line Thicknessprocess control
10-µm placement accuracy (XY)
Our products are inspected according to our proceduresbased on the MIL standard or the customer requirements
ESD control
Real Time 3D X-Rays
High and low magnitude stereoscopes
Humidity and Temperature control
Dimension and Weight
Bond Pull Testing
Die Shear Testing
Thermography
Our products are designed and tested to meet the mostdemanding environmental conditions
Our test procedures are based on the MIL-STD-883 andMIL-STD-202 standards
Thermal Shock
Thermal Cycling
Test on demand:› Mechanical Test
› Burn-in
› Life Test
› Humidity Test
› Hermeticity (gross and fine leak)
ENVIRONMENTAL TEST
We have a complete electrical test lab that includes:
› 2-Port PNA to 40 GHz
› 4-Port VNA to 9 GHz & 3-Port VNA to 9 GHz
› IMD and Harmonics and TRD testing
› Noise Figure Testing to 40 GHz
› Spectrum Analyzers (26.5 GHz & 50 GHz)
› RF generators to 67 GHz
› Power Testing to 40 GHz
› High Speed Oscilloscopes to 4 GHz
› Frequency & Time Analyzer
› Phase Noise Test System to 40 GHz
› GPS clock reference
› Temperature Characterization
› Programmable Power Supply
› High Precision Multimeters
› Handheld Multimeters
› Automatic testing via GPIB
We design and manufacture high performance standard and customproducts:
Digital Attenuators
› Up to 64 dB / up to 40 GHz / up to 11 bits / Narrowband, OctaveBandwidth and Broadband models / High Precision / Extremely lowtemperature drift
Switches
› Broadband up to 40 GHz / Low Loss and High Isolation / MiniaturePackages
Amplifiers
› LNAs, Medium Power, Temperature Compensation, Gain Equalization,Variable Gain
Others
› Detectors, Bias Tees, DC Blocks, Filters, Phase Shifters,
Custom modules
QP-ATDIG-2729-01 is an S-Band Precision
Digital Attenuator. The main features are:› 64 dB attenuation range
› 11 Bits (0.03125 dB step)
› Guaranteed monotonicity
› Bandwidth: 2.7 to 2.9 GHz
› Flatness: ±0.5 dB (0 to 64 dB)
› Accuracy: ±0.5 dB (0 to 64 dB)
› Temperature Drift: ±0.5 dB
› Insertion loss: < 1.8 dB
› Low Phase Drift
› Switching Time: < 500 ns
› Low Switching Glitches
› VSWR: <1.5:1
› Operating Temperature: -40º to 85ºC
QP-ATDIG-0232-01 is a Broadband Digital Attenuator. Themain features are:› 64-dB attenuation range
› 6 Bits (7-bit version available)
› Bandwidth: 2 to 32 GHz (possible to 40 GHz)
› Insertion loss: <15 dB
› +-5 V, 50 mA Power Supply
› Switching Time: <100 ns
› VSWR: < 2.5:1
› Operating Temperature: -40º to 85ºC
2000 12000 22000 32000
Frequency (MHz)
SN_002 NORM ATT
-70
-65
-60
-55
-50
-45
-40
-35
-30
-25
-20
-15
-10
-5
0
DB(SDeltaM(SN_002 IL,2,1,2,1,2))SN_002 1dB
DB(SDeltaM(SN_002 IL,2,1,2,1,2))SN_002 3dB
DB(SDeltaM(SN_002 IL,2,1,2,1,2))SN_002 7dB
DB(SDeltaM(SN_002 IL,2,1,2,1,2))SN_002 15dB
DB(SDeltaM(SN_002 IL,2,1,2,1,2))SN_002 31dB
DB(SDeltaM(SN_002 IL,2,1,2,1,2))SN_002 63dB
2000 12000 22000 32000
Frequency (MHz)
SN_002 IL
-50
-45
-40
-35
-30
-25
-20
-15
-10
-5
0
32000 MHz-12.84 dB
DB(|S(2,1)|)
SN_002 IL
QP-SWS2A-0140-01 is a miniature switch covering 1 to 40GHz. The main characteristics are:› 13.5mm × 17.5mm × 8.5mm miniature case
› Absorptive design
› 60-dB Minimum Isolation
› 6-dB Maximum Insertion Loss
› VSWR: < 2.5:1
› 25-ns Switching time
› Operating Temperature: -40º to 85ºC
QP-EQ9D0-0018-05 is a slope equalizer covering 0.5 to 18GHz with the following performance:› Ø9mm × 41.8mm miniature case
› VSWR: <1.8:1
› 9 dB ± 0.5 dB linear negative slope
QP-BITEE-0040-03 is a High Current Broadband Bias Teefrom 0.5 to 40 GHz:› 19.1mm × 21.2mm × 9.3mm miniature case
› 50V, 1000mA
› 1.5-dB Insertion Loss
› 1.6:1 VSWR
QP-DTSTK-1640-01 is biased precision Schottky detectorfrom 16 to 40 GHz:› 2000 mV/mW sensitivity typ.
› 2.5:1 VSWR typ.
› Operating Temperature: -40º to 85ºC
QP-AMLNA-0122-01 is a Low Noise, High Power, Flatresponse microwave amplifier from 1 to 22 GHz:› 12 V, 500 mA Single Power Supply
› 4-dB Noise Figure
› 1W output Power
› 23-dB Gain typ.
› ±1.5 dB Flatness max.
› Operating Temperature: -40º to 85ºC
1 6 11 16 21 22
Frequency (GHz)
LNA RL
0
0.5
1
1.5
2
2.5
3
3.5
4
3.189 GHz2
VSWR(1)LNA MEASUREMENTS
VSWR(2)LNA MEASUREMENTS
QP-AMWPS-0122-01 is a Low Noise, High Linearity,Positive Slope microwave amplifier from 1 to 22 GHz.› 12 V, 500 mA Single Power Supply
› 20-dB Gain @ 1 GHz
› 7-dB Slope
› 4-dB Typ. Noise Figure
› 40-dBm Typ. OIP3
› Operating Temperature: -40º to 85ºC
QP-AMWPS-0140-02 is a Low Noise Positive Slopemicrowave amplifier from 1 to 40 GHz.› 8-dB Gain @ 1 GHz
› 12-dB Slope, ±2-dB Flatness
› 26-dBm OIP3 min. @ 1 GHz
› Output Power Detection
› 12 V, 540 mA Single Power Supply
› Operating Temperature: -40º to 85ºC
0
1
2
3
4
5
6
-20 -10 0 10 20 30
Vd
et
(V)
Pout (dBm)
Detected Output Power
1GHz
10GHz
20GHz
30GHz
40GHz
QP-AMATT-0118-01 is a Variable Gain Amplifier from 1to 18 GHz.› 23-dB Gain Typ. ± 2-dB Flatness
› 25-dB Attenuation Range
› 8-dB Noise Figure @ 0dB att.
› Output Power Detection
› 12 V, 360 mA Single Power Supply
› SPI digital control
0
1
2
3
4
5
6
-10 0 10 20 30
Vd
et
(V)
dBm
Detector Voltage vs Power
1GHz
9.5GHz
18GHz
QP-AMPWR-0812-01 is a High Power, High Gain,X- Band Amplifier:› 8 V, 3.2 A Single Power Supply
› 35-dB Gain Typ.
› 5W Output Power
› 2:1 VSWR Max.
› Small Size: 37.5mm × 39.1mm × 11.3mm
› Operating Temperature: -40º to 85ºC
We can offer filters under customer specifications
QP-FSPLL-0040-01 Frequency Synthesizer:› 50 MHz to 40 GHz
› Up to 0.04-Hz Freq Step
› Up to 30-µs Switching Time
› 15-dBm Output Power
› Low harmonics and spurious levels
› Operating Temperature: -20º to 70ºC
› IP67 ruggedized rack-mounted case
-160
-150
-140
-130
-120
-110
-100
-90
-80
-70
-60
-50
0,1 1 10 100 1000 10000
Lf (
dB
c/H
z)
Offset frequency (KHz)
TYPICAL PHASE NOISE
1 GHz
3 GHz
10 GHz
20 GHz
40 GHz
QP-TROPT-0555-01 Optical Transceiver:› 0.5 to 5.5 GHz
› 10-dB RF Link Gain min.
› 5-dBm Optical Output Power
› 50-Ohm TX Input Impedance
› 1310-nm TX wavelength
› 850- to 1600-nm RX wavelength
› 5 V, 300 mA Single Power Supply
› Operating temperature: 0 to 40ºC
QP-MDSEL-0206-01 Input Selector Module:› 2 to 6 GHz
› 10-dB Gain ± 2-dB Flatness
› 2:1 VSWR
› 10-dBm OP1dB min.
› 12-dB NF max.
› GPO/SMP male full detent connectors (RF)
› 21-pin socket MIL-C-83513 connector (Power supply/Control)
› 7V, 800mA Power Supply