SPLIT ROLLER BEARING INNOVATIONSfrom Revolvo

Revolvo Ltd. Unit 4, Yorks Park,Blowers Green Road, Dudley, West Midlands DY2 8UZ

Tel: +44 (0) 845 388 0061Fax: +44 (0) 845 388 0062e-mail: sales@revolvo.comweb: www.revolvo.com

An ERIKS Company

Authorised Distributor Stamp

The compact Split Plummer Block Bearing from Revolvo is the first split cylindrical roller bearing assembly to be interchangeable with standard SNL/SN/SD/SAF series Plummer Blocks.

Cast iron Plummer Blocks accommodating adaptor sleeve-mounted solid spherical roller bearings are amongst the most common types in use, supporting rotating shafts in everything from conveyors and fans to line shafts. Yet their replacement is often time-consuming and difficult, due to the need to remove adjacent equipment.

Plummer Block Housings

Key benefits:

Dimensionally interchangeable with SNL/ SN/SD and SAF series Plummer Blocks

Easy section removal enables rapid visual inspection

Allows for heat expansion whilst avoiding any additional stresses in the bearing

Compensates for high degree of shaft misalignment

New, more compact design

Short lead times

Innovation in

SPLIT ROLLER BEARINGS

call +44 (0) 845 388 0061 or visit www.revolvo.com

Fully interchangable units allow for cost effective conversions from SN/SD plummer blocks

Specialist & Customised Products

SRB offer a complete design and manufacturing service for special and bespoke applications.

Examples include:

Ball Mill Support Bearings, Water Cooled Continuous Casters, Industrial High Pressure Pump Bearings, Wire Strander Bearings,Rotary Biological Contactor Support Bearings, Special Seal Design Options.

Revolvo are committed to providing a service that contributes to the optimisation of your plant efficiency by providing specialised bearing solutions in both SRB split bearing and RRP solid rolling element bearings.

Our approach of working closely with customers allows us to continuously refine and improve our products, production processes and service procedures.SRB Ref SN/SD Ref H H2 B J x J1 L x M G Shaft Size

SN 01 SN 508 60 135 84 170 205 x 60 12 ø 35SN 509 ø 40

SN 02 SN 511 70 155 96 210 255 x 70 16 ø 50SN 03 SN 513 80 180 102 234 275 x 70 16 ø 60SN 03A SN 515 280 x 70 ø 65SN 04 SN 516 95 208 112 260 315 x 90 20 ø 70

SN 517 ø 75SN 05 SN 518 100 230 134 290 345 x 100 20 ø 80SN 05A SN 519 112 242 ø 85SN 05B SN 520 320 380 x 110 24 ø 90SN 06 SN 522 125 265 132 350 410 x 120 24 ø 100SN 07 SN 524 140 300 140 350 410 x 120 24 ø 110SN 07A SN 526 150 310 380 445 x 130 ø 115SN 08 SN 528 150 354 154 420 500 x 150 30 ø 125SN 09 SN 530 160 369 166 450 530 x 160 30 ø 135SN 09A SN 532 170 379 166 470 550 x 160 30 ø 140SD 10 SD 3134 170 379 172 430 x 100 510 x 180 24 ø 150SD 11 SD 3136 180 396 172 450 x 110 530 x 190 24 ø 160SD 12 SD 3138 190 417 172 480 x 120 560 x 210 24 ø 170SD 12A SD 3140 210 437 510 x 130 610 x 230 30 ø 180SN 13 SD 3144 220 457 172 540 x 140 640 x 240 30 ø 200SD 14 SD 3148 240 510 176 600 x 150 700 x 260 30 ø 220SD 15 SD 3152 260 545 188 650 x 160 770 x 280 36 ø 240SD 16 SD 3156 280 589 204 670 x 160 790 x 280 36 ø 260SD 16A SD 3160 300 609 710 x 190 830 x 310 ø 280SD 17 SD 3164 320 662 216 750 x 200 880 x 330 36 ø 300

Producing products that push the boundaries of performance is only the beginning.

Revolvo have long recognised that you not only need high performing bearings, but also the best logistical, technical and after sales support to truly make the difference to your business.

Immediate response and reaction to both industry trends and customer specific requirements enables Revolvo to assist from design concept, through to commissioning offering consultation, training, and on site support service.

The Revolvo Service

Cellular Manufacturing provides flexibility for the production of both standard and specialised units

Modular Stocking improves product availability and delivery times Dedicated CNC Plant improves process

and quality control Bespoke Designs, supported by

experienced bearing engineers and CAD systems

Application Support Engineers are available to discuss application detail and for site visits

Local Support through authorised distributor network worldwide

Innovation in

APPLICATION Innovation in

SERVICE

call +44 (0) 845 388 0061 or visit www.revolvo.com

Innovation in

PERFORMANCE

Revolvo Split Roller Bearings (SRBs) have been designed and developed to maximise service life and minimise maintenance effort.

From concept to design, design to production and throughout the lifecycle of the product, no other split bearing manufacturer works so hard to exceed your expectations.

The complete range of Split Roller Bearings incorporate a number of innovative features that assist the user in terms of product performance and also the maintenance engineer with fitting and assembly benefits.

Machined Brass Cage accommodates higher speed and temperatures as well as acceleration forces, whilst at the same time, reducing noise

Robust Support Design includes double webs and thick sections of high grade cast iron to enhance product life through rigidity and strength

Profiled Rolling Elements minimise damaging edge stress and accommodate minor dynamic misalignment

Light, Medium and Heavy Series ensure an exact match of bearing performance to your specification

Comprehensive Range of Supports to suit an extensive number of applications

SRB: Taking the Initiative

The benefits of a totally split to the shaft bearing are long established with savings in production and maintenance well documented. However, split roller bearings are now being selected for a wide range of applications based on other benefits they provide including;

High Radial Load and Speed Capability Initially Self Aligning Wide Range of Standard Supports Flexible Sealing Arrangements Interchangeability

Maintenance Friendly

New Single Piece Cage Clip Design, offering not only accurate cage alignment but also offering the maintenance engineer a free hand whist assembling Pry Slots on all dowelled machined joints

for easy separation of the support Intuitive Assembly made easy by

features and markings to ensure correct positioning and orientation of all parts

Standard Support with Complete Housing & Bearing

Flange Support

Take Up Tension Unit Complete with Housing

Take Up Pull Unit

Hanger Unit

Quick InspectionSupport caps & housing halves easily removed for quick visual inspection of bearing components during maintenance

Innovative Cage ClipClips retained on one cage half during assembly and disassembly

Machined Brass CageAs standard - Enhanced ability to accommodate higher speeds andtemperature

250 Grade Cast IronConforms to BS EN1561:1997 for additionalstrength and durability

Profiled Rolling ElementsMinimises damaging edge stress for increasing bearing life and reliability

Why Choose Revolvo Split Bearings?

The New SNQ Range

The Revolvo Split roller bearing unit has evolved into the next generation, reducing downtime even further.

Whilst keeping the traditional bearing and housing construction, Revolvo has developed a cast iron support to allow mounting in locations where clearance between base to centre of the shaft is at a minimum.

This new design negates the need to increase the height of the shaft to allow clearance for the support whilst the integral strength of the cast iron remains uncompromised.

New 45° split For faster and easier installation

Producing products that push the boundaries of performance is only the beginning.

Revolvo have long recognised that you not only need high performing bearings, but also the best logistical, technical and after sales support to truly make the difference to your business.

Immediate response and reaction to both industry trends and customer specific requirements enables Revolvo to assist from design concept, through to commissioning offering consultation, training, and on site support service.

The Revolvo Service

Cellular Manufacturing provides flexibility for the production of both standard and specialised units

Modular Stocking improves product availability and delivery times Dedicated CNC Plant improves process

and quality control Bespoke Designs, supported by

experienced bearing engineers and CAD systems

Application Support Engineers are available to discuss application detail and for site visits

Local Support through authorised distributor network worldwide

Innovation in

APPLICATION Innovation in

SERVICE

call +44 (0) 845 388 0061 or visit www.revolvo.com

Innovation in

PERFORMANCE

Revolvo Split Roller Bearings (SRBs) have been designed and developed to maximise service life and minimise maintenance effort.

From concept to design, design to production and throughout the lifecycle of the product, no other split bearing manufacturer works so hard to exceed your expectations.

The complete range of Split Roller Bearings incorporate a number of innovative features that assist the user in terms of product performance and also the maintenance engineer with fitting and assembly benefits.

Machined Brass Cage accommodates higher speed and temperatures as well as acceleration forces, whilst at the same time, reducing noise

Robust Support Design includes double webs and thick sections of high grade cast iron to enhance product life through rigidity and strength

Profiled Rolling Elements minimise damaging edge stress and accommodate minor dynamic misalignment

Light, Medium and Heavy Series ensure an exact match of bearing performance to your specification

Comprehensive Range of Supports to suit an extensive number of applications

SRB: Taking the Initiative

The benefits of a totally split to the shaft bearing are long established with savings in production and maintenance well documented. However, split roller bearings are now being selected for a wide range of applications based on other benefits they provide including;

High Radial Load and Speed Capability Initially Self Aligning Wide Range of Standard Supports Flexible Sealing Arrangements Interchangeability

Maintenance Friendly

New Single Piece Cage Clip Design, offering not only accurate cage alignment but also offering the maintenance engineer a free hand whist assembling Pry Slots on all dowelled machined joints

for easy separation of the support Intuitive Assembly made easy by

features and markings to ensure correct positioning and orientation of all parts

Standard Support with Complete Housing & Bearing

Flange Support

Take Up Tension Unit Complete with Housing

Take Up Pull Unit

Hanger Unit

Quick InspectionSupport caps & housing halves easily removed for quick visual inspection of bearing components during maintenance

Innovative Cage ClipClips retained on one cage half during assembly and disassembly

Machined Brass CageAs standard - Enhanced ability to accommodate higher speeds andtemperature

250 Grade Cast IronConforms to BS EN1561:1997 for additionalstrength and durability

Profiled Rolling ElementsMinimises damaging edge stress for increasing bearing life and reliability

Why Choose Revolvo Split Bearings?

The New SNQ Range

The Revolvo Split roller bearing unit has evolved into the next generation, reducing downtime even further.

Whilst keeping the traditional bearing and housing construction, Revolvo has developed a cast iron support to allow mounting in locations where clearance between base to centre of the shaft is at a minimum.

This new design negates the need to increase the height of the shaft to allow clearance for the support whilst the integral strength of the cast iron remains uncompromised.

New 45° split For faster and easier installation

Producing products that push the boundaries of performance is only the beginning.

Revolvo have long recognised that you not only need high performing bearings, but also the best logistical, technical and after sales support to truly make the difference to your business.

Immediate response and reaction to both industry trends and customer specific requirements enables Revolvo to assist from design concept, through to commissioning offering consultation, training, and on site support service.

The Revolvo Service

Cellular Manufacturing provides flexibility for the production of both standard and specialised units

Modular Stocking improves product availability and delivery times Dedicated CNC Plant improves process

and quality control Bespoke Designs, supported by

experienced bearing engineers and CAD systems

Application Support Engineers are available to discuss application detail and for site visits

Local Support through authorised distributor network worldwide

Innovation in

APPLICATION Innovation in

SERVICE

call +44 (0) 845 388 0061 or visit www.revolvo.com

Innovation in

PERFORMANCE

Revolvo Split Roller Bearings (SRBs) have been designed and developed to maximise service life and minimise maintenance effort.

From concept to design, design to production and throughout the lifecycle of the product, no other split bearing manufacturer works so hard to exceed your expectations.

The complete range of Split Roller Bearings incorporate a number of innovative features that assist the user in terms of product performance and also the maintenance engineer with fitting and assembly benefits.

Machined Brass Cage accommodates higher speed and temperatures as well as acceleration forces, whilst at the same time, reducing noise

Robust Support Design includes double webs and thick sections of high grade cast iron to enhance product life through rigidity and strength

Profiled Rolling Elements minimise damaging edge stress and accommodate minor dynamic misalignment

Light, Medium and Heavy Series ensure an exact match of bearing performance to your specification

Comprehensive Range of Supports to suit an extensive number of applications

SRB: Taking the Initiative

The benefits of a totally split to the shaft bearing are long established with savings in production and maintenance well documented. However, split roller bearings are now being selected for a wide range of applications based on other benefits they provide including;

High Radial Load and Speed Capability Initially Self Aligning Wide Range of Standard Supports Flexible Sealing Arrangements Interchangeability

Maintenance Friendly

New Single Piece Cage Clip Design, offering not only accurate cage alignment but also offering the maintenance engineer a free hand whist assembling Pry Slots on all dowelled machined joints

for easy separation of the support Intuitive Assembly made easy by

features and markings to ensure correct positioning and orientation of all parts

Standard Support with Complete Housing & Bearing

Flange Support

Take Up Tension Unit Complete with Housing

Take Up Pull Unit

Hanger Unit

Quick InspectionSupport caps & housing halves easily removed for quick visual inspection of bearing components during maintenance

Innovative Cage ClipClips retained on one cage half during assembly and disassembly

Machined Brass CageAs standard - Enhanced ability to accommodate higher speeds andtemperature

250 Grade Cast IronConforms to BS EN1561:1997 for additionalstrength and durability

Profiled Rolling ElementsMinimises damaging edge stress for increasing bearing life and reliability

Why Choose Revolvo Split Bearings?

The New SNQ Range

The Revolvo Split roller bearing unit has evolved into the next generation, reducing downtime even further.

Whilst keeping the traditional bearing and housing construction, Revolvo has developed a cast iron support to allow mounting in locations where clearance between base to centre of the shaft is at a minimum.

This new design negates the need to increase the height of the shaft to allow clearance for the support whilst the integral strength of the cast iron remains uncompromised.

New 45° split For faster and easier installation

SPLIT ROLLER BEARING INNOVATIONSfrom Revolvo

Revolvo Ltd. Unit 4, Yorks Park,Blowers Green Road, Dudley, West Midlands DY2 8UZ

Tel: +44 (0) 845 388 0061Fax: +44 (0) 845 388 0062e-mail: sales@revolvo.comweb: www.revolvo.com

An ERIKS Company

Authorised Distributor Stamp

The compact Split Plummer Block Bearing from Revolvo is the first split cylindrical roller bearing assembly to be interchangeable with standard SNL/SN/SD/SAF series Plummer Blocks.

Cast iron Plummer Blocks accommodating adaptor sleeve-mounted solid spherical roller bearings are amongst the most common types in use, supporting rotating shafts in everything from conveyors and fans to line shafts. Yet their replacement is often time-consuming and difficult, due to the need to remove adjacent equipment.

Plummer Block Housings

Key benefits:

Dimensionally interchangeable with SNL/ SN/SD and SAF series Plummer Blocks

Easy section removal enables rapid visual inspection

Allows for heat expansion whilst avoiding any additional stresses in the bearing

Compensates for high degree of shaft misalignment

New, more compact design

Short lead times

Innovation in

SPLIT ROLLER BEARINGS

call +44 (0) 845 388 0061 or visit www.revolvo.com

Fully interchangable units allow for cost effective conversions from SN/SD plummer blocks

Specialist & Customised Products

SRB offer a complete design and manufacturing service for special and bespoke applications.

Examples include:

Ball Mill Support Bearings, Water Cooled Continuous Casters, Industrial High Pressure Pump Bearings, Wire Strander Bearings,Rotary Biological Contactor Support Bearings, Special Seal Design Options.

Revolvo are committed to providing a service that contributes to the optimisation of your plant efficiency by providing specialised bearing solutions in both SRB split bearing and RRP solid rolling element bearings.

Our approach of working closely with customers allows us to continuously refine and improve our products, production processes and service procedures.SRB Ref SN/SD Ref H H2 B J x J1 L x M G Shaft Size

SN 01 SN 508 60 135 84 170 205 x 60 12 ø 35SN 509 ø 40

SN 02 SN 511 70 155 96 210 255 x 70 16 ø 50SN 03 SN 513 80 180 102 234 275 x 70 16 ø 60SN 03A SN 515 280 x 70 ø 65SN 04 SN 516 95 208 112 260 315 x 90 20 ø 70

SN 517 ø 75SN 05 SN 518 100 230 134 290 345 x 100 20 ø 80SN 05A SN 519 112 242 ø 85SN 05B SN 520 320 380 x 110 24 ø 90SN 06 SN 522 125 265 132 350 410 x 120 24 ø 100SN 07 SN 524 140 300 140 350 410 x 120 24 ø 110SN 07A SN 526 150 310 380 445 x 130 ø 115SN 08 SN 528 150 354 154 420 500 x 150 30 ø 125SN 09 SN 530 160 369 166 450 530 x 160 30 ø 135SN 09A SN 532 170 379 166 470 550 x 160 30 ø 140SD 10 SD 3134 170 379 172 430 x 100 510 x 180 24 ø 150SD 11 SD 3136 180 396 172 450 x 110 530 x 190 24 ø 160SD 12 SD 3138 190 417 172 480 x 120 560 x 210 24 ø 170SD 12A SD 3140 210 437 510 x 130 610 x 230 30 ø 180SN 13 SD 3144 220 457 172 540 x 140 640 x 240 30 ø 200SD 14 SD 3148 240 510 176 600 x 150 700 x 260 30 ø 220SD 15 SD 3152 260 545 188 650 x 160 770 x 280 36 ø 240SD 16 SD 3156 280 589 204 670 x 160 790 x 280 36 ø 260SD 16A SD 3160 300 609 710 x 190 830 x 310 ø 280SD 17 SD 3164 320 662 216 750 x 200 880 x 330 36 ø 300

SPLIT ROLLER BEARING INNOVATIONSfrom Revolvo

Revolvo Ltd. Unit 4, Yorks Park,Blowers Green Road, Dudley, West Midlands DY2 8UZ

Tel: +44 (0) 845 388 0061Fax: +44 (0) 845 388 0062e-mail: sales@revolvo.comweb: www.revolvo.com

An ERIKS Company

Authorised Distributor Stamp

The compact Split Plummer Block Bearing from Revolvo is the first split cylindrical roller bearing assembly to be interchangeable with standard SNL/SN/SD/SAF series Plummer Blocks.

Cast iron Plummer Blocks accommodating adaptor sleeve-mounted solid spherical roller bearings are amongst the most common types in use, supporting rotating shafts in everything from conveyors and fans to line shafts. Yet their replacement is often time-consuming and difficult, due to the need to remove adjacent equipment.

Plummer Block Housings

Key benefits:

Dimensionally interchangeable with SNL/ SN/SD and SAF series Plummer Blocks

Easy section removal enables rapid visual inspection

Allows for heat expansion whilst avoiding any additional stresses in the bearing

Compensates for high degree of shaft misalignment

New, more compact design

Short lead times

Innovation in

SPLIT ROLLER BEARINGS

call +44 (0) 845 388 0061 or visit www.revolvo.com

Fully interchangable units allow for cost effective conversions from SN/SD plummer blocks

Specialist & Customised Products

SRB offer a complete design and manufacturing service for special and bespoke applications.

Examples include:

Ball Mill Support Bearings, Water Cooled Continuous Casters, Industrial High Pressure Pump Bearings, Wire Strander Bearings,Rotary Biological Contactor Support Bearings, Special Seal Design Options.

Revolvo are committed to providing a service that contributes to the optimisation of your plant efficiency by providing specialised bearing solutions in both SRB split bearing and RRP solid rolling element bearings.

Our approach of working closely with customers allows us to continuously refine and improve our products, production processes and service procedures.SRB Ref SN/SD Ref H H2 B J x J1 L x M G Shaft Size

SN 01 SN 508 60 135 84 170 205 x 60 12 ø 35SN 509 ø 40

SN 02 SN 511 70 155 96 210 255 x 70 16 ø 50SN 03 SN 513 80 180 102 234 275 x 70 16 ø 60SN 03A SN 515 280 x 70 ø 65SN 04 SN 516 95 208 112 260 315 x 90 20 ø 70

SN 517 ø 75SN 05 SN 518 100 230 134 290 345 x 100 20 ø 80SN 05A SN 519 112 242 ø 85SN 05B SN 520 320 380 x 110 24 ø 90SN 06 SN 522 125 265 132 350 410 x 120 24 ø 100SN 07 SN 524 140 300 140 350 410 x 120 24 ø 110SN 07A SN 526 150 310 380 445 x 130 ø 115SN 08 SN 528 150 354 154 420 500 x 150 30 ø 125SN 09 SN 530 160 369 166 450 530 x 160 30 ø 135SN 09A SN 532 170 379 166 470 550 x 160 30 ø 140SD 10 SD 3134 170 379 172 430 x 100 510 x 180 24 ø 150SD 11 SD 3136 180 396 172 450 x 110 530 x 190 24 ø 160SD 12 SD 3138 190 417 172 480 x 120 560 x 210 24 ø 170SD 12A SD 3140 210 437 510 x 130 610 x 230 30 ø 180SN 13 SD 3144 220 457 172 540 x 140 640 x 240 30 ø 200SD 14 SD 3148 240 510 176 600 x 150 700 x 260 30 ø 220SD 15 SD 3152 260 545 188 650 x 160 770 x 280 36 ø 240SD 16 SD 3156 280 589 204 670 x 160 790 x 280 36 ø 260SD 16A SD 3160 300 609 710 x 190 830 x 310 ø 280SD 17 SD 3164 320 662 216 750 x 200 880 x 330 36 ø 300

www.eriks.nl

AlkmaarSaffierstraat 31812 RM Alkmaar T (072) 514 17 17F (072) 514 16 25E esc.alkmaar@eriks.nl

AlmeloPlesmanweg 127602 PE AlmeloT (0546) 87 30 70 F (0546) 87 32 68 E almelo@eriks.nl

AmsterdamDynamostraat 46-481014 BK Amsterdam-WestpoortT (020) 448 96 10 F (020) 613 77 65 E amsterdam@eriks.nl

ArnhemPieter Calandweg 466827 BK Arnhem T (026) 362 92 44F (026) 361 00 63E arnhem@eriks.nl

Bergen op Zoom Van Konijnenburgweg 44 b4612 PL Bergen op Zoom T (0164) 27 55 44F (0164) 27 55 49E bergenopzoom@eriks.nl

Delfzijl Deltaweg 309936 HK FarmsumT (0596) 63 38 20F (0596) 63 38 29E delfzijl@eriks.nl

Den Haag / Marofra Neckar 2 2491 BD Den Haag T (070) 381 84 84F (070) 381 84 36E denhaag@eriks.nl

DoetinchemHavenstraat 557005 AG DoetinchemT (0314) 34 37 20F (0314) 34 37 41E doetinchem@eriks.nl

EdeGalvanistraat 346716 AE EdeT (0318) 43 96 14F (0318) 64 01 04E ede@eriks.nl

EerbeekLoubergweg 196961 EJ EerbeekT (0313) 67 95 00F (0313) 65 47 68E eerbeek@eriks.nl

EindhovenDe Witbogt 22 a5652 AG EindhovenT (040) 291 19 00F (040) 291 19 09E eindhoven@eriks.nl

EmmenWillem Schoutenstraat 11 b7825 VV EmmenT (0591) 66 80 00F (0591) 66 80 06E emmen@eriks.nl

HengeloHassinkweg 16 7556 BV HengeloT (074) 291 57 57F (074) 291 59 39E hengelo@eriks.nl

HoornDe Factorij 35 d1689 AK ZwaagT (0229) 21 28 82F (0229) 21 93 74E hoorn@eriks.nl

GoudaMarconistraat 1172809 PG GoudaT (0182) 33 11 60F (0182) 37 82 02E gouda@eriks.nl

GroningenRouaanstraat 89723 CD GroningenT (050) 368 49 99F (050) 368 49 98E groningen@eriks.nl

LeeuwardenJames Wattstraat 19 8912 AS LeeuwardenT (058) 215 05 87F (058) 215 85 16E leeuwarden@eriks.nl

MaastrichtAmerikalaan 286199 AE Maastricht-AirportT (043) 604 91 80F (043) 363 87 28E maastricht@eriks.nl RijnmondShannonweg 33, Haven 50793197 LG Rotterdam-BotlekT (010) 231 34 00F (010) 296 96 18E rijnmond@eriks.nl

RoermondAda Byronweg 116045 GM RoermondT (0475) 37 22 70F (0475) 37 23 05E roermond@eriks.nl

TilburgEllen Pankhurststraat 95032 MD TilburgT (013) 571 45 61F (013) 570 06 42E tilburg@eriks.nl

ZwolleAmpèrestraat 278013 PT ZwolleT (038) 467 29 20F (038) 467 29 29E zwolle@eriks.nl

ERIKS Servicecenters

DordrechtKeerweer 413316 KA DordrechtT (078) 652 21 21F (078) 652 21 29E info.dordrecht@eriks.nl

GroningenRouaanstraat 89723 CD GroningenT (050) 368 49 49F (050) 314 62 57E info.groningen@eriks.nl

LeeuwardenJames Wattstraat 198912 AS LeeuwardenT (058) 294 50 50F (058) 213 24 71E info.leeuwarden@eriks.nl

RoermondAlbert Einsteinweg 8 6045 GX RoermondT (0475) 37 22 33F (0475) 32 75 40E info.roermond@eriks.nl

RotterdamSevillaweg 75 3047 AL RotterdamT (010) 245 50 00 F (010) 262 06 22E info.rotterdam@eriks.nl

SchoonhovenBroeikweg 252871 RM SchoonhovenT (0182) 30 34 56F (0182) 38 69 20E info.schoonhoven@eriks.nl

ERIKS vestigingenAandrijftechniek