COVER LETTER

MOHAMMAD SHAHNAWAZResume for Instrument & Control Supervisor

Commissioning and Maintenance

UAE : +971-502105512 : +91-8581045253/9507176467

: mohammadshahnawaz64@yahoo.com : snawaz219@gmail.com : Shahnawaz219

Dear Sir,Being given to understand that there is a vacancy for the post of Instrument

Supervisor * in your esteemed organization. This opportunity is very interesting, and I believe that my strong technical experience and education will make me a very competitive candidate for this position. I have got 12 years ’ experience in Oil & Gas (Brown field & Green field), especially in testing commissioning and maintenance of HART & FOUNDATION FEILDBUS Protocol DCS / ESD / F&G (ABB, HONEYWELL, YOKOGAWA & TRICONEX) / VMS (BENTLY NEVADA) / PLC(Allen Bradley) MMS, MARK-6 (GE) systems and field instrumentation .And my area of experiences are listed below;

Gas Plant KHURSANYA GAS PROJECT ARAMCO (SAUDI ARAB),

ISG (ALGIREA) and KDC (OMAN)

Shutdown KDC (Oman) ADCO (Abu Dhabi)

Refinery Sector, SAMREF, ARAMCO (SAUDI ARAB)

(BPCL) Bharat Petroleum Company LTD (INDIA)

Production Well, Water Injection Cluster, Water Injection Wells,

Remote Degassing Stations(RDS’s), Central Degassing

Stations ADCO (UAE)

Petrochemical Plants Reliance and Hindustan Lever Ltd

(INDIA)

Gas turbine compressor, ISG (ALGIREA) Motor drive

compressor PDO, (OMAN) vapor recovery compressor ADCO

(UAE)

PMC Supervisor in AL-HOSN SGD PROJECT SHAH (UAE)

Thank you for your time and consideration. I look forward to speaking with you about

this employment opportunity.

Career Highlights

Instrument Supervisor – (25January 2016 – To Till Date)Applus Velosi , Abu Dhabi, U.A.EProject: Dolphin energy Role

Work Started as maintenance instrument supervisor in gas receiving facility

Instrument Supervisor – (02February 2014 – To 3o June 2015)SEPAM PMC / Fluor Mideast, Abu Dhabi, U.A.EProject: SGD Project Package 2&3 Shah Gas (AL-HOSN GAS) Role

Responsibilities: As a Project management team member I have to ensure that the Instrument implementation contractor carry out.

Co-ordination with vendor for skid instrument installation, modification Commissioning and troubleshooting. Co-ordination with the client engineering dept. to resolve the engineering issues. Follow up with the EPC contractor the construction planning, calibration in instrument calibration shop & valve

shop for control valves and progress on daily basis Perform, Ability to read and interpret construction drawing such as, Piping and Instrumentation Diagram, Instrument Loop Diagram, Instrument Points and Lines, Hook up Diagram and etc.

Instrument Commissioning Supervisor – (February 2013 –16 January 2014)Brunel energy /National Petroleum Construction Company (NPCC), Abu Dhabi, U.A.EProject: BAB THAMAMA “G” AND HABSHAN-2 DEVELOPMENT 1.8 MMBOPD PROJECT (ADCO) Role

Supervising the loop checking of instruments and testing of pumps logic and lead a team of commissioning technicians and give assistance to the commissioning manager and engineer.

I have successfully done Shutdown, Pre-Commissioning & Commissioning of fire&gas system, process, compressor and skid. Preparing the requirements for temporary equipment to facilitate the Commissioning/Start-Up activities. 

Involvement in the Preparation of Commissioning data base in ICAPS (Integrated Commissioning and Progress System).

DCS/ESD/F&G (ABB-800XA and freelance)/PLC systems, SCMS (Substation Control Monitoring System) MPFM, HIPPS(High Integrity Protection System), Flare Ignition Panel (Flare System), Air Compressor package (ATLAS COPCO), Nitrogen Generation package (GENERON) and Chemical Injection System (vendor: FRAMES) in Remote Degassing Station (RDS), Central Degassing Stations, (CDS) Water Injection Clusters and Oil Production wells, Surface Injection Pumps (SIP), ETC.

Instrument Commissioning Supervisor (Jan2012 – Feb 2013) PETROFAC E&C INTERNATIONAL LTD Project: Kauther Gas project PDO (Oman) Role

Managing and planning of electrical and instrumentation commissioning activities in a safe manner. Attending safety and progress meeting on weekly basis, coordination with client and permit issuing authority. . Preparing the list of the Job Specifications and material requisitions required to comply with the project

requirements. Discussing with the Client Representatives, for clearing the technical problems during the execution period. Keeping the Contract documents and the project quality specifications to ensure the activities are carried out as

per the project scope. Preparation of weekly/monthly report and attend the weekly shutdown progress meetings with client (PDO). Commissioning of DCS YOKOGAWA 3500 Vibration monitoring system (BENTLY NEVADA 3500 SERIES) motor

drive compressor, Anti surge system (ccc), Water chiller plant with Allen Bradley PLC, and VFD system. Successfully have done 06 month warranty period maintenance and support of Client | (PDO)

Instrument Commissioning Supervisor (Oct 2009 – Aug 2011) PETROFAC E&C INTERNATIONAL LTDProject: Insaleh Gas Compression Algeria Role

Manage and supervise the instrumentation and process commissioning activities at the site on a day-to-day basis.

Provide the technical support and quality based execution/construction ideas to the Instrument Team in order to improve the work progress.

On-site coordination of Loop checks and Functional checks pre commissioning and commissioning and startup. Successfully handled the pre-commissioning and commissioning of instrument systems, including updating

drawings and producing 'As-Built' up to final acceptance tests. Testing and commissioning of DCS//ESD/ F&G systems (flashers, smoke detectors, heat detectors, flame

detectors, gas detectors and MCP (manual call Point) INERGEN system, and other utility systems in the plant. Successfully have done 06 month warranty period maintenance and support of Client (ISG)

Commissioning Instrument Forman (Apr 2007 to July 2009)Consolidated Contractors Company (CCC) (Saudi Arab).Project: Khursaniya Gas Plant (Saudi Aramco)Role

Successfully handled the Loop Checking, pre-commissioning / commissioning/start-up of instrument systems, including updating drawings and producing 'As- Built' up to final acceptance tests.

F&G systems (smoke detectors, heat detectors, flame detectors, gas detectors and MCP(manual call Point) INERGEN system, Telecommunication System

Responsible of calibration, Commissioning AND trouble shutting like HART and FF Protocol YOKOGAWA DCS and Field Device, on/off ESD shutdown valve control valve electronic and pneumatic transmitter switches ETC.

Successfully completed (Sulfur recovery, Sulfur loading, Cracker, NGL Unite and Flare system) Attained weekly meeting with client and subcontractors and PMC teams to follow up the progress and related

issues.

Senior Instrument Technician (Jan 2006 to Sep 2006)Olyan Descon (Saudi Arab).Project: Samref (Yanbu), sasref (Jubail) Role

Carry out preventive and break down maintenance, Loop Checking and arranging of spares, materials, test equipment’s etc.,

Contacting pre-job meeting, risk analysis and toolbox talks. Daily job progress reporting, failure reports and completing assigned job on time Replacement from old

pneumatic system and transmitter to electronic Employed as group leader for the upgrading and revamping project for both instruments and system

(YOKOGAWA TDC 3000 system and smart serious transmitters)

Instrumentation Technician (Feb 2004 to Jan 2006)ICB Technimont Pvt ltd (India).

Project: RIL, CP-10 & PTA-3 Gujarat (India) Role

Carry out all instrument loop checking/functional test/pre-commissioning and commissioning and related activities in the Chemical plant,

Instruments (Gauges, transmitters, Control Valves), Fiber optic patch panels and related construction activities. involved in Calibration and Testing of (DP LT, DPT, PT,TT, TS,PG,LG) Etc. in Calibration shop Field Instrument installations, JB installation, leak test for impulse line, and calibration to ensure the quality

criteria are kept and no violation has occurred.

in loop checking, calibration and commissioning jobs for both pneumatic and electronic process instruments and control systems

Instrument Technician (Nov 2002 to Sep 2003)Elematics Engineering Pvt Ltd, India.Project: BPCL MAHUL and HINDUSTAN LIVER LTD (India)Role

Calibration of all Electronic Hart Protocol and pneumatic transmitter Gauges, switches, Pneumatic controller, control valve, ON/Off valve, emergency valve (Z.V), PZV

loop check, from field to system, Analog and digital as per ILD/ Segment diagram, specification sheets and P&ID commissioning as per logic, and Cause & effect Diagram, specification sheets and P&ID, valve and Transmitter trouble shooting. /functional test/pre-commissioning and commissioning d related activities in the Chemical plant

Major Instruments handled

Flow Meters: Multi Phase Flow Meter (HIAMO), Mass flow (Rosemount and Forbes Marshall), Vortex (Yokogawa), Magnetic meter (Yokogawa and Forbes Marshall), Orifice, Turbine type & Oval wheel meters, Ultrasonic flow meters (GE), Rota meters (KHRONE).

Foundation Field bus –Emerson Process Management, Yokogawa Transmitters: Rosemount (Smart, FF, Foxboro Intelligent Transmitter, Honeywell, Yokogawa, ABB, Siemens. F&G system: Simplex, General Monitors, MEDC, Tyco, Dragger etc.. Control Valves: FISHER, MASONONELIAN, ABB, met so, Flowserve etc.

Educational and IT Skills Highlights

DIPLOMA IN ELECTRONICS & INSTRUMENTATION from Community polytechnic collage Kolkata India Course

duration: (1999-2002)

Higher Secondary School from Patna Science college (1997-1999)

SSC(Secondary school Education) from (ARHA HIGH SCHOOL) Bihar board -1997

Operating System -Linux, WINDOWS 7/8/XP/Vista, Productivity Tools -MS Office 2010, ADOBE 2010.

Professional Enhancements

H2S Escape Mask training & Confined Space Entry Training Fire Fighting system training Safety Induction – SHES training center PTW Training attended and passed for ISG, PDO and ADCO. Health Safety and Environment, and Occupational Health and Safety codes and standards.

Personal Information

Languages Known : English, Hindi, Urdu and Arabic Date of Birth : 05-01-1979.Marital Status : MarriedNationality : Indian Address : Palsa Kurd, PO/PS Chandra deep, dist. Jamui, Bihar, India 805124 MOB: +91-8581045253

Passport Details

Passport Number : K-7428153Place of Issue : Muscat

Date of issue : 29-12-2012 Date of expiry : 28-12-2022

Declaration- I hereby declare that the above information is true and correct to the best of my knowledge

ReferencesBINOY MANATTU

Senior Instrument Engineerbinoymanaat@yahoo.co.in /binoymb@npcc.ae

CONTACT NO:- +971566485854

Mr. Tauheed AshrafInstrument Supervisor

Email: - tauhidashraf@gmail.comCONTACT NO:- +91-9939097866

MOHAMAD SHAHANAWAZ