RESUME

NAME REDENTOR L. ROMEROPOSITION APPLIED Plastic Production Head Address 113 Narra Street Lakeview 2

Putatan, Muntinlupa City Contacts Mobile: 09177434216, Tel. No.808-12-80

CAREER SUMMARY

More than 15 years experienced in Injection Molding Process. I supervise the complete operation of the production plans, schedule, control and overseas production operation to attain production goals of correct product quality, target schedules and quality through effective utilization of material, manpower and machines.

WORK EXPERIENCES

ZELLER PLASTIK PHILIPPINES, INCORPORATIONBldg. 3 Phil Crest Compound Km. 23, West Service Road, Cupang, Muntinlupa City.

July 2010 at Present

COMPANY DESCRIPTION

Zeller Plastik Incorporation is a global closure system company that manufactures plastic caps of J&J, Green Cross, Tupperware, AVON, Splash, Uniliver, Coca-Cola and Pepsi.

ISO 9001-2008, HACCP, Food Safety System Certification PRODUCTION SUPERVISOR

JOB DESCRIPTION

Supervise the entire operation from raw material to finished product. I monitor performance of Mold Technician, line Technician, Process Technician, Team Leader Grinder, Mixer, Packer, and Operatorto check their task has been accomplished, and if it attain the standard output. Check Daily Production Report, Submit monthly Over-all Equipment Effectiveness Report, Submit Weekly O.E.E. Report, Weekly Top Spoilage Contributor and make improvement plan. Also accomplished 8 Discipline regarding Customer complaint. Implementation of Company Rules and Regulation. Conduct tool box meeting before start operation regarding production issue. Check & Monitor Safety, Good Manufacturing Practice, 5’S, Manpower Schedule.

SHINLIM INDUSTRIAL CORPORATIONLot. 1 Block 11, Sepz, Laguna International Industrial Park, Binan Laguna Philippines

March 3, 1994 to March 2009

ISO 9001-2000

PRODUCTION INJECTION MOULDING SUPERVISOR

COMPANY DESCRIPTION

ShinLim Industrial Corporation is a manufacturing of various plastic and rubber packaging materials for semi conductor and electronics industries.

Supervises all over operation on product process and product quality such as:- Integrated circuit tray- Integrated circuit reel- Telephone case- Case for electronics parts- End pin for shipping tubes

Supervises all over operation on process test and quality product in all incoming raw material such as:

- Polysulfone - Polyethersulfone- Polycarbonate- ABS- Nylon - Acrylic- Polyvinyl chloride- Polystyrene

Responsible for the operation and maintenance of Injection moulding machine, which are registered from Korea Dong shin

Supervises over all operation and maintenances of injection moulds which customer are:

- Sanyo Phils. - Maxon Phil’s.- Texas instrument Phils. - Mitsumi Phil’s. - Ionic’s Phil’s. - DAE Ryung Phil’s.- ROHM electronics Phil’s. - Dai Yoon Phil’s.- Motorola Phil’s. - Zilog Phil’s.

Responsible for the operation and maintenance of different kinds of machines such as:

- Hoist motor 7.5 hp - Granulator machine- Chiller machine - Mixing machine- Compressor - Hopper dryers - Mould controller - Oven machine

Prepare daily production analysis on how to increase productivity and to decrease production losses. Prepare improvement plan for the weekly total losses and total output analysis Prepare work instruction for the individual item that already passes for each customer. Administrating technical training and information to the shift supervisor, operator with regards to

safety machine operation, product processing and product quality.

TRADESPHERE INDUSTRIAL COMMODITIES, INCORPORATIONKm. 16 south Super hi-wayParanaque, Metro Manila Phil’s.

Sept. 16, 1993 to Mar. 01, 1994

ISO 9001-2000

PRODUCTION SUPERVISOR

COMPANY DESCRIPTION

Trade sphere Industrial Commodities Incorporation is a Manufacturing of various plastic packaging materials for electronics, Medical parts, and beverages. Other services offered designed and mold fabrication.

JOB DESCRITION

Supervises over all operation on product processing and product quality such as:

- Bottle - Cassette cases- Caps - Audio, Video parts- Lens Cover - Frames- Tray - Cabinet

Responsible for the operation and maintenance of 20 units injection molding machines and 5 units blow moldings machines such as:

- Kawaguchi Injection Moulding Machine- J. S. W. Injection Moulding Machine - Toshiba Injection Moulding Machines- Nigata Injection Moulding Machines

Supervises over all operation on process test and product quality in all material such as:

- Polystyrene - Acrylic- low density polyethelyn - Polycarbonate- high density polyethelyn - Polyproplene- ABS

Prepare daily production report and submit it to the production manager Constantly keeping problems may arise in the daily production Conduct orientation to the production operator regarding accepted quality product.

ALSHARK PLASTIC AND PAPER FACTORYRiyadh, Kingdom of Sandi Arabia

July 11, 1991 to Aug. 12, 1993

MOULD SETTER

COMPANY DESCRIPTION

Alshark Plastic and Paper Factory is one of the Biggest Company Production all kinds of plastic and Paper other Services mould design, Fabrication, and repair. JOB DESCRIPTION

Responsible for mounting and dismounting of different kinds of moulds Responsible for the actual parameter setting for each item. Report to the production supervisor all the problem encountered regarding poor quality and low

quantity Perform test mould together with the production supervisor which ensure the quality are on the

standard specification. Perform test various incoming raw material such as:

- ABS - Polystyrene- H.D.P.E. - Polycarbonate- L.D.P.E. - Polypropylene- Acrylic - Polyvinyl Chloride

FIL – YAMADA CO., LTD. INC.

Laspinas, Metro Manila Phil’s.

March 2, 19901 to June 30, 1991

LEADMAN OPERATOR

COMPANY DESCRIPTION

Fil-Yamada Co., Ltd. Inc. is a manufacturing of Plastic packaging for jewelry case.

JOB DESCRIPTION

Report directly to the production manager in line activity Coordinates with quality control regarding problem on the production line. Responsible for evaluation analysis, testing of mould products prior to mass production.

- Inspection of incoming raw material and returned delivery product.- Coordinates with the mould technician regarding mould problem encountered during

operation.- Coordinate with the machine technicians regarding machine problems - See to it the operator are working in good condition as well the machines are working in good

condition.

ECO PLASTIC, PHILI’SBagong Tanyag TaguigMetro Manila, Phil’s.

Feb. 01, 1989 to Feb. 07, 1990

CADET ENGINEER

COMPANY DESCRIPTION

Eco Plastic is a manufacturing of Plastic Packaging for foods, and mould design

JOB DESCRIPTION

Reports to maintenance manager for further instruction on task for the day. Executes assigned tasks with minimum supervisor and with the aid of standard operation manual and

process documentation. Coordinates with supervisor and update the incoming adjustment machines parameters setting Perform parameter adjustment on machines with newly mounted mould and with quality problems Prepare daily production analysis on how to increase productivity and to decrease production codes.

COMPUTER APPLICATION

MS Word, Excel

PERSONAL INFORMATION

Age : 51 yrs oldPlace of Birth : Rosario, Pasig City, Phil’s.Citizenship : FilipinoReligion : Roman CatholicStatus : MarriedSex : MaleHeight : 165.1 cm.Weight : 60 kgs.Language : English, Tagalog

EDUCATIONAL ATTAINMENT

Primary : Bayanan, Elementary SchoolMuntinlupa City Phil’s1976

Secondary : Jacobo Z. Gonzales MemorialSchool of Arts and TradesBinan , Laguna Phil’s1980

College : FEATI UniversitySta. Cruz, Manila Phil’s1985

Course : Bachelor of Science in Electrical Engineering

PRC License : Passed the Licensure Examination for Electrical EngineerLicense No. 0016423

June 1987

TRAINING / SEMINARS

ISO 9001 - 2000 Introductory Course Oct. 8, 11, 2002ISO 9001 - 2000 Documentary Course Oct. 18, 19, 2002ISO 9001 - 2001 Internal Audit Course Oct. 24, 26, 2002Fire Drill Training May 15-16, 2007

Designing and Conducting Training Needs Analysis October 22, 2010

NC and CAPA Workshop June 6-7, 2011 Risk Management Workshop September 13, 2011 Hazard Analysis Critical Points (HACCP) April 20, 2012 Food Safety Management System May 18-19,2012

ACHIVEMENTS

Board passer Electrical Engineering License Examination June 1987.