RESUME OF RAJENDRA KUMAR GOYAL - College of … of Dr Goyal.pdfRESUME OF RAJENDRA KUMAR GOYAL 1....
Transcript of RESUME OF RAJENDRA KUMAR GOYAL - College of … of Dr Goyal.pdfRESUME OF RAJENDRA KUMAR GOYAL 1....
RESUME OF RAJENDRA KUMAR GOYAL
1. Name: DR. RAJENDRA KUMAR GOYAL
2. Address for Correspondence
Associate Professor
Department of Metallurgy and Materials Science
College of Engineering Pune (COEP)
Shivaji Nagar, Pune (Maharashtra) - 411 005
E-mail: [email protected]
Tel: (020) 25507275 (O); 09423534247 (M), Fax No.: 020-25507299
3. EDUCATIONAL QUALIFICATIONS
# Materials Research Society of India (MRSI)
Qualified Graduate Aptitude Test in Engineering (GATE) in 1996. All India Rank: 40
4. RESEARCH INTEREST
Processing, Properties and Characterization of Polymer Nanocomposites/Composites,
Polymer nanocomposites for electronics, tribological and biomedical applications,
Correlation of physical properties with theoretical models, Characterization of
nanomaterials
Examination/
Degree
Year
Division
% Marks/
Grade
University/College/
Board
Distinctions/
Scholarship
Secondary School 1988 First 72 % Rajasthan Board Distinctions in Chemistry
Sr. Hr. Secondary
School
1990 First 66 % Rajasthan Board Distinctions in Chem.,
Phys., Maths
B. E. (Met. Engg.) 1995 First 73 % University of Rajasthan Honours
Pre-Ph.D Course
work
2003 - 8.68 / 10 IIT Bombay, Powai,
Mumbai
MRSI# has awarded Best
Ph.D. Thesis prize in
Material Science (2007) Ph. D (Met. & Mat.
Sci., (External)
2007
- - IIT Bombay, Powai,
Mumbai
5. + Title of Ph.D. Thesis Preparation and Characterization of High Performance Polymer Matrix Composites
Based on PEEK and AlN/Al2O3 Dispersions (Advisors: Dr. A. N. Tiwari, IIT Bombay and
Dr. Y. S. Negi, IIT Roorkee)
6. PROFESSIONAL EXPERIENCE
Employer Post held Period of Employment Nature of Duties/Work
From To
Teaching Experience in COEP College of
Engineering Pune,
Shivaji Nagar, Pune
(Maharashtra) – India
Associate Professor ----------------- Assistant Professor
03/02/2011 -------------- 27-03-08
Till date
------------02/02/2011
Teaching to UG and PG students,
Research on polymeric materials,
Guiding to Ph.D., M. Tech. and B. Tech.
students,
Administrative work: laboratory in-
charge, faculty advisor, treasurer-student
co-op. society store, core-committee
member of M. Tech. admission etc.
Research Experience (R & D)
Centre for Materials for Electronics Technology (C-MET), DIT, Govt. of India ---------------------------
-do-
Scientist ----------------- Staff Tech. IV
27-07-04 --------------- 28-12-98
25-03-08 ---------------- 26-07-04
Research & Development
Development of polymer
nanocomposites/ composites and
chromophore doped polymers for various
applications
Industrial (QC/R&D) Experience
Lloyd Steel (P) Ltd.,
Wardha (M.S.)
Engineer 26-08-96 18-11-98 Quality control/R & D
Study and optimization of process control
parameters of continuous casting machine
Alcobex Metals
Ltd., Jodhpur
(Rajasthan)
Metallurgist 07-02-96 12-08-96 Laboratory (Quality control)
7. Recent status (in brief) of publications, students guided and sponsored projects
Project/Thesis/Supervision
(Annexure-IV to VI)
Publications [Annexure-II (in
Journals) & III (in Conferences)]
Sponsored Projects/
Consultancy (Annexure-I)
Degree Level
Projects
Nos. Category
Published/Accepte
d
Nos. Category Nos. Amount (Lakh)
A IP Journals Con. C IP
Ph.D.
(annexure-IV)
1 4+1 Published 55 79 3 0 70 lakhs (Core projects)
M. Tech.
(annexure-V)
29 3 In-press 0 0 4 - 40 lakhs (sponsored)
B. Tech.(pairs)
(annexure-VI)
31 3 Under Review - - 4 0 6.7 lakhs
(Consultancies)
- - - Total 55 78 10 0 -
A = Awarded IP = In Progress C= Completed Con=Conference
8. Books: 2
1. An Introduction to Surface Alloying of Metals by Santosh S. Hosmani, P. Kuppusami,
Rajendra Kumar Goyal, Springer, ISBN 978-81-322-1889-0, May 2014.
2. Nanomaterials and nanocomposites: Synthesis, Properties, Characterization
Techniques and Applications by Rajendra Kumar Goyal, CRC Press, Tailor &
Francis Group, ISBN-13: 978-1-4987-6166-6, In-press, 2017.
(Annexure –I)
Projects Completed as principal investigator/Co-Investigator/Team member
Sr. No.
Name of the funding agency
Name of the
Scheme
Programme Title
Year of Funding
Duration
Amount Sanctioned
(Rs. in lakhs)
Status Completed Ongoing
1 Sunshell Pvt.
Ltd Consultancy
Optimization of milling time to get spherical powder
2016 1 year 1.35 Completed
2 Cummins
Technologies
India Limited
Consultancy Investigation on failed Polymeric Fan
2014 15 days 0.45 Completed
4 Industrial
Metal Powders (I) Pvt. Ltd.,
Pune
Consultancy Investigation on PP-Metal Composites
2014 1 Year
(2014-15) 4.0
Completed
(published 2
papers)
5 Gharda Chem.
Ltd. Thane Sponsored G-PAEK Based Polymeric
Nanocomposites 2014
1 Year
(2013-14) 0.90 Completed
6
Alumni-COEP Sponsored
Polymer/Ceramic Nanocomposites Substrate for Microwave Communication Applications
2017 1 year
(2017-18) 1.5 Ongoing
7
AICTE Sponsored
Fabrication and characterization of Low Cost Novel Three-Phase Polymer Nanocomposites for Embedded Capacitors Applications
March
2013
3 Years
(2013-16) 20.00 Completed
8 ISRO Sponsored Development of High Performance Polycarbonate/ Graphite Nanocomposites with Low Percolation for EMI Shielding Application
July
2011 2 years 10.33 Completed
9
UGC Major
research
Fabrication and Electrical Properties of Low Cost High Performance Conducting Polymer Nanocomposites
2009 2 years 10.88
Completed
(published 3
papers)
10 ISRO Sponsored Development of low cost NLO chromophore doped polymer (Guest Host System)
2005 2 years 4.44 Completed
11 DIT,
Govt. of India
Core
project*
Development of polymers for optoelectronics applications
2002 5 years 40.00 Completed
12 DIT/DoE,
Govt. of India
Core
project*
Development of polyimides for electronics & microelectronics applications
1999 3 years 40.00 Completed
*PI has worked as a team member in C-MET, Pune. Budget outlay of each project was > 40.00 lakhs.
(Annexure –II)
Publications in Peer Reviewed Journals (Total: 55): National (4) + International (51)
Sl.
No
.
Title of Paper/Report/Book Author(s) Name and volume of
Journal, and Year of
Publication.
Page No.
From To
Year 2016-2017: 5
1 Study on Effect of Cubic- and Tetragonal Phased BaTiO3 on the Electrical and Thermal Properties of Polymeric Nanocomposites
A. A. Thanki,
R. K. Goyal
Mater Chem Phys, 183
(2016)
10.1016/j.matchemphys.
2016.08.052
447 456
2 Tribological and Thermal Properties of Hexagonal Boron Nitride Filled High Performance Polymer Nanocomposites
R K Goyal,
M Joshi, A.
Goyal, S. Patil
Journal of Applied
Polymer Science,
2016, 133
DOI: 10.1002/app.44409
44409
(1-9
pages)
3 Polycarbonate based three-phase nanocomposite dielectrics
P. K. Sain, R. K. Goyal, Y.V.S.S. Prasad, A. K. Bhargava
Materials Research
Express, 3(8), (2016),
doi:10.1088/2053-
1591/3/8/085016
085016
4 Single-Walled/ Multi-walled Carbon-
Nanotube filled Polycarbonate
Nanocomposites for Advanced
Electronic Applications
P. Sain, R.K.
Goyal, A.K.
Bhargava, Y.V.
S. S. Prasad,
J Electr Mater, 46(1)
2017,
DOI: 10.1007/s11664-
016-4907-5
458 466
5 Novel Polyacrylonitrile/Potassium Sodium Niobate Composites with Superior Dielectric and Thermal Properties
Kaustubh
Kambale,
Rajendra Goyal,
Sandeep Butee,
Rohan Parsewar,
Hanmant
Gawade, Sameer
Shroff
Composites
Communications, 5
(2017).
doi.org/10.1016/j.coco.2017.04.003
8 12
Year 2015-2016: 5
6 Synthesis of iron nanopowder and
its nanocomposites with high
electrical conductivity and thermal
stability
R. K. Goyal,
P. Dhoka,
A. Bora,
P. Gaikwad
Journal of Materials
Science & Surface
Engineering, 4 (1),
2016.
339 341
7 Electrical properties of
polycarbonate/ nickel composites
prepared by a simple processing
technique
A Gupta,
R. K. Goyal
Journal of Materials
Science & Surface
Engineering, 4 (2),
2016
351 354
8 Synthesis of ZrO2 nanopowder
using high energy ball mill and
characterization
R. K. Goyal,
S.P. Deshpande,
S.S. Singare
Journal of Materials
Science & Surface
Engineering, 4 (2),
2016.
360 363
9 Disappearance of Curie
Temperature of BaTiO3
Nanopowder Synthesised by High
Energy Ball Mill
S. Pendse,
R. K. Goyal
Journal of Materials
Science & Surface
Engineering, 4 (3),
2016.
383 385
10 Effect of Processing Routes on Electrical Properties of Polymer/Iron Composites
C. Kale, P. Dhoka, R. K. Goyal
Journal of Electronic
Materials, 45(8), 2016,
DOI: 10.1007/s11664-
016-4652-9
4148 4153
Year 2014-2015:3
11 Study on PVDF/Ni composites with
low percolation
R. K. Goyal,
R. Sulakhe
Advanced Materials
Letter
2015, 6(4), 309-317
DOI: 10.5185/amlett.201
5.5627
12 Few-Layer-Graphene/
Polycarbonate Nanocomposites as
Dielectric and Conducting Material
P. K. Sain, R. K.
Goyal, Y. V. S. S.
Prasad, Jyoti, K.
B. Sharma, A. K.
Bhargava
Journal of Applied
Polymer Science, 2015,
132.
42443
(1-7
pages)
13 Thermal and Dielectric Properties of
High Performance Polymer/ZnO
Nanocomposites’
Divij P Vaishnav
R K Goyal
IOP Conf. Series:
Materials Science and
Engineering 64 (2014)
012016.
DOI:10.1088/1757-
899X/64/1/012016
1 10
Year 2013-2014: 5
14 Thermal and Dielectric Behaviour of flexible Polycarbonate/Lead Zirconate Titanate Composite System.
P.K. Sain, R.K. Goyal, A.K. Bhargava, Y.V.S.S. Prasad
Journal of Applied Polymer Science Vol. 131, Issue 4, February 15, 2014, 39913-39919, DOI: 10.1002/app.39913
39913 339919
15 Thermal and Electronic Behaviour of Polycarbonate/Copper nanocomposites
P.K. Sain, R.K. Goyal, A.K. Bhargava, Y.V.S.S. Prasad
Journal of Physics D: Applied Physics 46 (2013) 455501-8
doi:10.1088/0022-3727/46/45/455501
455501 1-8
16 The wear and friction behavior of Novel PTFE/expanded graphite nanocomposites for Tribology Application
R. K. Goyal, M. Yadav
J of Tribology, 136(2), 021601 (1-5) (Dec 27, 2013) (5 pages) doi:10.1115/1.4025655
21601 1-5
17 Cost-efficient high performance polyetheretherketone/expanded graphite nanocomposites with high conductivity for EMI shielding application
R.K. Goyal Materials Chemistry and Physics Volume 142, Issue 1, 15 October 2013, Pages 195-198. Doi.org/10.1016/j.matchemphys.2013.07.005
195 198
18 Influence of Cu Micro Particles on Mechanical Properties of Injection Molded Polypropylene/Cu Composites
M. A. Kori, M. G. Kulthe, R. K. Goyal
International Journal of Innovative Research in Science, Engineering and Technology, Vol. 3, Issue 6, June 2014 (ISSN: 2319-8753)
14034 14043
Year 2012-2013: 5
19 Dielectric, mechanical and thermal properties of polymer/BaTiO3 composites for embedded
R. K. Goyal, S. S. Katkade,
Composites: Part B 44 (2013)
128 132
capacitor D. M. Mule DOI:10.1016/j.compositesb.2012.06.019
20 PEEK/SiO2 Composites with High Thermal Stability for Electronic Applications
R.K. Goyal, K.A. Rokade, A.S. Kapadia, B. S. Selukar, B. Garnaik
Electronic Materials Letter 9 (2013) DOI:10.1007/s13391-012-2107-x
95 100
21 Electrical properties of novel three-phase polymer nanocomposites with high dielectric constant
R. K. Goyal,
A. B. Kulkarni J Phys D: Applied Physics
45 (2012)
465302 ( (9pp)
22 High Performance polymer/AlN composites for electronic substrate application
R. K. Goyal, A. N. Tiwari Y. S. Negi
Composites: Part B 47 (2013)
DOI.org/10.1016/j.compositesb.2012.10.025
70 74
23 Study on Phenyltrimethoxysilane Treated Nano-Silica Filled High Performance Poly(etheretherketone) Nanocomposites
R. K. Goyal Aditi Kapadia
Composites: Part B 50 (2013) 135-143
DOI: 10.1016/j.compositesb.2013.01.015
135 143
Year 2011-2012:4
24 Fabrication and properties of Poly(etheretherketone)/Barium titanate composites with low dielectric loss
R. K. Goyal, P. R. Pakankar, V. N. Madav, S. P. Butee
Journal of Electronic Materials 40; 2011 (DOI: 10.1007/s11664-011-1743-5).
2240 2247
25 Study on wear and friction behavior of graphite flake filled PTFE composites
R. K. Goyal, M. Yadav
Journal of Applied Polymer Science 127 (2013), (DOI: 10.1002/app.37707)
3186 3191
26 The effect of ball milling timing on electrical properties of PVC/Cu composites
R. K. Goyal, M. Kulthe
Advanced Materials Letters 3; (2012) (DOI:10.5185/amlett.2012.3326.
246 249
27 High performance PEEK/AlN micro- and nanocomposites for tribological application
R.K. Goyal, A.N. Tiwari, Y.S. Negi,
Journal of Applied Polymer Science 124; (2012).
4612 4619
Year 2010-2011: 11
28 Study on high performance PEEK/Si3N4 nanocomposites: New electronic substrate materials
V. Balaji, A.N. Tiwari, R.K. Goyal,
Polymer Engineering and Science 51:2011.
509 517
29 Role of interface on dynamic modulus of high performance PEEK/ceramic composites
R.K. Goyal, A.N. Tiwari, Y.S. Negi,
Journal of Applied Polymer Science 121: 2011
436 444
30 Improvement in thermal, mechanical and water resistance properties of epoxy/glass particulate composites
Joshi, A.N. Tiwari, R.K. Goyal,
International Journal of Plastics Technology 14: 2011.
167 178
31 Preparation and properties of new polyphenylene sulphide/AlN composites for electronics applications packaging
R. K. Goyal P. Jadhav A.N. Tiwari
Journal of Electronic Materials 40; 2011
1377 1383
32 Mechanical, thermal and electrical properties of high performance
R. K. Goyal, K.R. Kambale,
Materials Chemistry and Physics 128; 2011
114 120
polymer/copper composites S. S. Nene, S. Sudhir, U. P. Mulik
33 SHG relaxation behaviour in m-nitroaniline doped PMMA guest-host system
R.K. Goyal, S.R. Damkale, U.P. Mulik, Y.S. Negi, J. W. Dadge, R.C. Aiyer
Advanced Materials Letter 1; 2010
264 268
34 Electrical properties of polymer/ expanded graphite nanocomposites with low percolation
R. K. Goyal,
S. D. Samant, A. K. Thakar, A. Kadam
Journal of Physics D: Applied Physics 43; 2010.
365404 (7 pp)
1-7
35 Fabrication of advanced poly(etheretherketone)/clay nanocomposites and their properties
R. K. Goyal J N Sahu
Advanced Materials Letter 1; 2010
205 209
36 Fabrication and properties of high performance PEEK/Si3N4 nanocomposites
V. Balaji, A.N. Tiwari, R.K. Goyal,
Journal of Applied Polymer Science 119; 2010.
311 318
37 Polyphenylene sulphide/graphite composites for EMI shielding applications
R. K. Goyal,
A. Kadam Advanced Materials Letters 1; 2010
143 147
38 Studies on the feasibility of recycled polystyrene doped with NLO active meta-Nitroaniline for optoelectronics applications
M. S. Sureshkumar, R. K. Goyal, YS Negi A. Pratheepkumar, K. Raghunatha Reddy, R. P. Singh, J. W. Dadge and R. C. Aiyer
Polymers Advanced Technologies 22; 2011 (DOI: 10.1002/pat.1685)
1865 1871
Year 2009-2010:1
39 Thermal, mechanical and dielectric properties of high performance PEEK/AlN nanocomposites
R.K. Goyal, A.N. Tiwari, U.P. Mulik, Y.S. Negi
Journal of Nanoscience and Nanotechnology 9; 2009
6902 6909
Year 2008-2009: 6
40 Thermal, mechanical, and dielectric properties of Polystyrene/ expanded graphite nanocomposites,
R.K. Goyal, P.A. Jagdale,
U.P. Mulik,
Journal of Applied Polymer Science 111; 2008
2071 2077
41 High performance nanocomposites for tribological applications: preparation and characterization
R.K. Goyal, A.N. Tiwari, Y.S. Negi,
Materials Science and Engineering A 486; 2008.
602 610
42 Microhardness of PEEK/ ceramic micro- and nanocomposites: Correlation with Halpin-Tsai model
R.K. Goyal, A.N. Tiwari, Y.S. Negi
Materials Science and Engineering A 491; 2008.
230 236
43 Thermal expansion behavior of high performance PEEK matrix composites
R.K. Goyal, A.N. Tiwari, U.P. Mulik,
Journal of Physics D: Applied Physics 41; 2008.
085403
085403
Y.S.Negi, (8pp)
44 Study on microhardness, dynamic mechanical and tribological properties of PEEK/Al2O3 composites
R.K. Goyal, A.N. Tiwari U.P. Mulik, Y.S. Negi
Journal of Applied Polymer Science 110; 2008.
3379 3387
45 Potential applications of Polystyrene in optoelectronics (Review Article)
M.S. Sureshkumar, R.K. Goyal, Y.S. Negi,
Progress in Rubber, Plastics and Recycling Technology 24; 2008.
53 72
Year 2007-2008:3
46 Novel high performance Al2O3/Poly(ether-ether-ketone) nanocomposites for electronics applications
R.K. Goyal, A.N. Tiwari, U.P. Mulik, Y.S. Neg
Composites Science and Technology 67; 2007.
1802 1812
47 Effect of aluminum nitride on thermo mechanical properties of high performance PEEK
R.K. Goyal, A.N. Tiwari, U.P. Mulik, Y.S. Negi,
Composites Part A: Applied Science & Manufacturing 38; 2007.
516 524
48 Dynamic mechanical properties of Al2O3/ Poly(ether ether ketone) composites
R.K. Goyal, A.N. Tiwari, U.P. Mulik, Y.S. Negi,
Journal of Applied Polymer Science 104; 2007.
568 575
Year 2006-2007:2
49 Anisotropic linear thermal expansivity of Poly(ether-ether-ketone)
R.K. Goyal, A.N. Tiwari, U.P. Mulik, Y.S. Negi
European Polymer Journal 42; 2006.
2888 2896
50 High performance polymer composites on PEEK reinforced with Aluminum oxide
R.K. Goyal, Y.S. Negi, A.N. Tiwari
Journal of Applied Polymer Science 100; 2006.
4623 4631
Year 2005-2006:1
51 Preparation of high performance composites based on Aluminum nitride/ Poly(ether-ether-ketone) and their properties
R.K. Goyal, A.N. Tiwari, Y.S. Negi
European Polymer Journal 41; 2005.
2034 2044
Year before 2005:4
52 Preparation and investigation of second harmonic generation (SHG) properties of m-Nitroaniline doped PMMA guest-host system for optoelectronic device applications
R.K. Goyal, S.R. Damkale, P.V. Adhyapak, M. Islam, R.C. Aiyer, Y.S.Negi,
International Journal of Plastics Technology 8; 2004.
249 255
53 Preparation of novel optical grade m-Nitroaniline and PMMA coated single crystals and their optical properties,
P.V. Adhyapak S.R. Damkale, R.K. Goyal,Y. S. Negi, M. Islam, R.C. Aiyer
Materials Letters 58; 2004. 3929 3932
54 Development of thermotropic liquid crystalline polymers and their applications (Review Article).
Y.S. Negi, R.K. Goyal,
International Journal of Plastics Technology 7; 2003.
99 118
55 Recent development of acrylic polymer coating for corrosion control and electronics applications
Y.S. Negi, R.K. Goyal,
Molecular Materials 14; 2001.
103 120
Annexure-III
Paper presented/published in conferences/seminars (Total: 79): Int. J. (58) + National J. (21)
Sl. No.
Title of Paper/Report/Book Author(s) Name, place and duration/date of conferences
2016-2017: 1
1. Electrical Properties of Graphene/Polymer nanocomposites Prepared by a Simple Route
Suyog Gaikwad and R K Goyal
International Conference on Advanced Rechargeable Batteries & allied Materials (ICARBM-2017), organized by Centre for Materials for Electronics Technology (C-MET) Pune during March 8-9 2017
2015-2016: 7
2 Improvement in Wear Resistance and Thermal Properties of Polymeric Nanocomposites
Manoj D. Joshi and R. K. Goyal
International conference on Nanoscience, Nanotechnology and Advanced Materials (NANOS2015), organized by GITAM University, Rushikonda, Visakhapatnam, Andhra Pradesh, India, Dec. 14-17, 2015.
3 Study on High Temperature
Poly(aryletherketon) (PAEK)
/Iron Composites Prepared by
Powder Metallurgy (P/M) Route
Suyog Gaikwad and R K Goyal
International Conference on Powder Metallurgy and Particulate Materials (PM 16),18-20 February, 2016, Hyatt Regency Pune, India
4 Synthesis and Characterization
of ZnNb2O6- Polycarbonate
composites (PM16-
1449492110)
Sandeep Butee, Nikhil Silam, R.K.Goyal, K. R.Kambale , Ganesh Kotiye
International Conference on Powder Metallurgy and Particulate Materials (PM 16),18-20 February, 2016, Hyatt Regency Pune, India
5 Synthesis of Molybdenum Disulphide (MoS2) Nanopowder Using Planetary Ball Mill
Harishwar Kale, Manisha Kulthe, R.K. Goyal
International Conference on Powder Metallurgy and Particulate Materials (PM 16),18-20 February, 2016, Hyatt Regency Pune, India
6 Study on Polypropylene/
Electrolytic Grade Iron
Composites Prepared by Twin
Screw Extruder for Elevator
Buckets
Chetan Kale, S. R. Panchal, Prakash Dhoka, R. K. Goyal
International Conference on Powder Metallurgy and Particulate Materials (PM 16),18-20 February, 2016, Hyatt Regency Pune, India
7 Study on the Effect of Ball
Milling on Dielectric and
Thermal Behaviour of High
Performance Polymer
Composites
S. D. Gaikwad,
R. K. Goyal
International Conference on Nanoscience and Nanotechnology for Energy Applications (EApp-2016), June 27-29, 2016, organized by Sathyabama University, Chennai, India .
8 High performance polymer
nanocomposites for biomedical
application
S. D. Gaikwad,
R. K. Goyal
International Conference on Biomaterials, biodiagnostics, tissue engineering, drug delivery and regenerative medicine (BiTERM 2016), April 15-17, 2016, organized by IIT Delhi and AIIMS, Delhi, India.
2014-2015: 7
9 Tribological behaviour of non asbestos brake pad materials containing aramid fibre and potassium titanate whisker
R. R. Chavan, S. S. Gawade, R. K. Goyal
RIT National Conference for Post Graduates (RIT NConPG-15) funded by TEQIP, 1st June,
2015
10 Scanning Electron Microscopy Study on Advanced Polymeric Nanocomposites
R. K. Goyal, D. P. Vaishnav
International Conference on Electron Microscopy & XXXV Annual Meeting of Electron Microscope Society of India (EMSI), Held at University of Delhi, India, July 9-11, 2014.
11 A Study on Effect of BaTiO3 on the Electrical Properties of Polymeric Nanocomposites
A. A. Thanki, J. Thanki and R. K. Goyal
52nd National Metallurgists’ Day (NMD) and 68th Annual Technical Meeting (ATM) “Redefining the Horizons of Metallurgy/Materials: Focus on Automotive, Aerospace, Defense and Energy” organized by IIM, held at College of Engg, Pune, 12-15 November 2014
12 Study on Polymer Matrix Micro- and Nanocomposites for EMI Shielding
R. K. Goyal, R. Sulakhe, R. Gadve and A. Gupta
52nd National Metallurgists’ Day (NMD) and 68th Annual Technical Meeting (ATM) “Redefining the Horizons of Metallurgy/Materials: Focus on Automotive, Aerospace, Defense and Energy” organized by IIM, held at College of Engg, Pune, 12
13 Polymer/Cobalt Composites for Electronic Applications
U. Vibhute and R. K. Goyal
52nd National Metallurgists’ Day (NMD) and 68th Annual Technical Meeting (ATM) “Redefining the Horizons of Metallurgy/Materials: Focus on Automotive, Aerospace, Defense and Energy” organized by IIM, held at College of Engg, Pune, 12
14 Preparation and Properties of Poly(phenylene sulfide)/Clay Nanocomposites
S. D. Sale and R. K. Goyal
52nd National Metallurgists’ Day (NMD) and 68th Annual Technical Meeting (ATM) “Redefining the Horizons of Metallurgy/Materials: Focus on Automotive, Aerospace, Defense and Energy” organized by IIM, held at College of Engg, Pune, 12
15 Synthesis of Zirconia Nanopowder Using Planetary Ball Mill
A. S. Bora, S. P. Deshpande, S. S. Singare, P. S. Sabe, and R. K. Goyal
52nd National Metallurgists’ Day (NMD) and 68th Annual Technical Meeting (ATM) “Redefining the Horizons of Metallurgy/Materials: Focus on Automotive, Aerospace, Defense and Energy” organized by IIM, held at College of Engg, Pune, 12
2013-14:10
16 Synthesis of Nanopowder Using Planetary Ball Milling Process
A.N. Walimbe, R. K. Goyal
International Conference on Powder Metallurgy & Particulate Materials held at Chennai, India, 23–25 Jan, 2014
17 Fabrication of Polycarbonate-ZnNb2O6 Nanocomposites
N. P. Silam, S. P. Butee, R.K. Goyal, S. G. Upadhyay
International Conference on Powder Metallurgy & Particulate Materials held at Chennai, India, 23–25 Jan, 2014
18 Fabrication and Properties of High Performance Polymer Nanocomposites Prepared by Planetary Ball Milling Process
R. K. Goyal, R.D. Gadve
International Conference on Powder Metallurgy & Particulate Materials held at Chennai, India, 23–25 Jan, 2014
19 Study on High Performance Polymer/ZnO Nanocomposites for Electronic Applications
Divij P Vaishnav R K Goyal
Int Conf on Structural Nanocomposites (NANOSTRUC2014), 20-21 May 2014, Madrid, Spain
20 Improvement in Wear Resistance of High Performance Polymer Composites
R. K. Goyal, M. D. Joshi
International Conference on Functional Materials (ICFM-2014), Held at IIT Kharagpur (W.B.), Feb 5-7, 2014.
21 Study on High Performance Polymer/ZnO Nanocomposites for Electronic Applications
R. K. Goyal, D. P. Vaishnav
International Conference on Functional Materials (ICFM-2014), Held at IIT Kharagpur (W.B.), Feb 5-7, 2014.
22 Dielectric and Thermal Properties of Polymer/BaTiO3 Nanocomposites for the Application of Embedded Capacitors
R. K. Goyal, A. A. Thanki
International Conference on Functional Materials (ICFM-2014), Held at IIT Kharagpur (W.B.), Feb 5-7, 2014.
23 Polymer/Nickel Composites for Electromagnetic Interference (EMI) Shielding Applications
R. K. Goyal, R. Deshpande
International Conference on Functional Materials (ICFM-2014), Held at IIT Kharagpur (W.B.), Feb 5-7, 2014.
24 Electrical properties of flexible polymer/BaTiO3
nanocomposites
R. K. Goyal, A. A. Thanki
6th National Symposium for Materials Research Scholars”, IIT Bombay, Mumbai, May 12-14, 2014.
25 PAEK/Ni composites for EMI shielding
R. K. Goyal, R. Deshpande
6th National Symposium for Materials Research Scholars”, IIT Bombay, Mumbai, May 12-14, 2014.
2012-2013
26 Fabrication and characterization of PEEK/BN composites for electronic applications
S.P. Kulkarni, U.K. Wanmali, R.K. Goyal
2nd International Conference on Electronics and Telecommunication Engineering (ICETE) organized by Global Research Association For Professional Higher Studies (GRAPHS) at Hotel Ritz, Pune, Maharastra, India, 22nd June 2013
2011-2012
27 Advanced High Performance Polymer Matrix Nanocomposites for Printed Circuit Boards (Best ORAL Presentation award)
Aditi Kapadia, R. K. Goyal
1st Int. Conf. on Functional Materials for Defence (ICFMD-2012) organized by Defence Institute of Advanced Technology (DIAT), Pune, Naval Post-Graduate School, USA and Office of Naval Research (Global), USA, held at DIAT Pune, May 18-20, 2012.
28 Electrical Properties of Flexible PVDF/ Ni Composites for EMI Shielding Applications
Rishka Sulakhe, R. K. Goyal
1st Int. Conf. on Functional Materials for Defence (ICFMD-2012) organized by Defence Institute of Advanced Technology (DIAT), Pune, Naval Post-Graduate School, USA and Office of Naval Research (Global), USA, held at DIAT Pune, May 18-20, 2012.
29 High Performance Polymer/Nickel Nanocomposites for EMI Shielding Applications
R.K. Goyal International Conference on Nanoscience and Technology (ICONSAT-2012), Organized by ARCI, Hyderabad, Jan 20-23, 2012
30 Fabrication and Properties of PVDF/BaTiO3 Nanocomposites for Electronic Applications
R.K. Goyal, A.H. Namjoshi, B. B. Joshi
International Conference on “Nanoscience, Engineering and Technology” (ICONSET - 2011) held at Sathyabama University, Chennai, India, Nov 28-30, 2011
31 Study on Novel High Performance Polymer Nanocomposites for Electronics Packaging
R. K. Goyal, K.A. Rokade, A.S. Kapadia
International Conference on “Nanoscience, Engineering and Technology” (ICONSET - 2011) held at Sathyabama University, Chennai, India, Nov 28-30, 2011
32 High Performance Polymer/Metal Nanocomposites
R. K. Goyal, International Conference on nanomaterials and nanotechnology (ICNANO 2011), University of
for Electronic Applications R. Sulakhe Delhi, Delhi, 18-21 Dec., 2011
33 Dielectric and Thermal Behavior of Polyetheretherketone/Silica Nanocomposites
R. K. Goyal, K.A. Rokade, A.S. Kapadia
International Conference on nanomaterials and nanotechnology (ICNANO 2011), University of Delhi, Delhi, 18-21 Dec., 2011
34 A Facile Preparation and Electrical Properties of Polymer/Graphite Nanocomposites
R. K. Goyal, A. Gupta
International Conference on nanomaterials and nanotechnology (ICNANO 2011), University of Delhi, Delhi, 18-21 Dec., 2011
35 Polyvinylidene fluoride/Nickel composites for EMI shielding Applications
R. K. Goyal, R. Sulakhe
Proceeding of Int. Con. on Precision, Meso, Micro, and Nano Engineering, at College of Engineering., Pune. Dec. 10-11, 2011.
36 PTFE/Graphite Micro- and Nanocomposites for Tribology Applications
R.K. Goyal, M. Yadav
International Conference and Exhibition on New Vistas on Particulate Materials Technology (PM-12) held at Mumbai, Feb 2-4, 2012.
37 Study on High Performance Polymer/Aluminum Nitride Nanocomposites for Printed Circuit Board Application
S. Shlok, D.S. Kini, R. K. Goyal
International Conference and Exhibition on New Vistas on Particulate Materials Technology (PM-12) held at Mumbai, Feb 2-4, 2012.
38 Effect of Ball-Milling Time on the Particle Dispersion and Electrical Properties of Polymer/Copper Composites
M.G. Kulthe, R. K. Goyal
International Conference and Exhibition on New Vistas on Particulate Materials Technology (PM-12) held at Mumbai, Feb 2-4, 2012
39 Fabrication and Properties of Polymer/BaTiO3 Composites for Electronics Applications
S. Katkade, D.M. Mule R. K. Goyal
International workshop & symposium on the synthesis and characterization of glass/glass-ceramics (IWSSCGGC-2010) organized by C-MET/MRSI Pune chapter, 7-9 July 2010.
40 Fabrication and Properties of High Performance Polymer/Clay Nanocomposites (2nd Best Poster Prize)
J. N. Sahu, R. K. Goyal.
National Symposium for Materials Research Scholars and Workshop on Advanced Characterization Techniques. 6-8 May 2010.
41 Properties of Poly(ether-ether-ketone)/clay nanocomposites (2nd Prize for Oral Presentation)
J. N. Sahu, R. K. Goyal
PAPYRUS, MELANGE 2010 organized by Vishwa Karma Institute of Technology, Pune
42 Study on Polymer/Graphite High Performance Micro- and Nanocomposites
A. Kadam R. K. Goyal
National Symposium for Materials Research Scholars and Workshop on Advanced Characterization Techniques. 6-8 May 2010.
43 Tribological Behavior of PTFE/Carbon Fiber Composites in Dry Condition.
Y.J. Kulkarni, S. M. Patil, R. K. Goyal, B. B. Ahuja
National conference on mechanical engineering emerging trends (MEET-10). Vardhaman College Of Engineering, Hyderabad. 4-5 June 2010.
44 Fabrication and Properties of Polyethylene/ Graphite Nanocomposites.
R. K. Goyal, M. G. Kulthe,
U. P. Mulik
21st AGM of MRSI organized by Sardar Patel University Vallabh Vidyanagar, Gujarat, India, February 9-11, 2010.
45 High Performance Polymer Micro- and Nanocomposites for Electronics Applications (Invited Talk)
R.K. Goyal
Continuous Education Programme (CEP) on PZT/Smart Materials/Electroceramics at Armament R & D Estt. (ARDE), Pune, DRDO Lab, 01-05 February 2010.
46 High Performance Polymer Matrix Micro- and Nanocomposites: New Electronic Packaging Substrate
R.K. Goyal
2nd International Conference on Polymer Processing and Characterization (ICPPC – 2010): January 15-17, 2010, Kottayam, Kerala , India
Materials (Invited Talk)
47 Fabrication and Properties of High Performance Polymer/EG Nanocomposites
R. K. Goyal,
S. D. Samant, A. K. Thakar
Polymer Congress (APA-2009) on 'Polymer Science and Technology, December 17-20, 2009
48 PEEK/Graphite Nanocomposites for EMI Applications
R. K. Goyal, S. V. Gune, B J.Deshpande
Polymer Congress (APA-2009) on 'Polymer Science and Technology, December 17-20, 2009
49 Fabrication, Thermal, Mechanical and Dielectric Properties of Polymer/BaTiO3 Composites
R. K. Goyal, P. R. Pakankar, V. N. Madav, S. P. Butee
International conference on electro-ceramics (ICE-2009), December 13-17, 2009.
50 High Performance PEEK/ Aluminum trioxide/Aluminum Nitride Micro- and Nanocomposites
R.K. Goyal, A.N. Tiwari, Y.S. Negi,
17th Annual International Conference on Composites/Nano Engineering (ICCE-17) July 16- August 1, 2009, Honolulu, Hawaii
51 High performance polymer nanocomposites with low percolation
R.K. Goyal, A.K. Thakar,
S. Samant
Proc. of Int. Conf. on Polymers: MACRO-2009, March 8-10, 2009, IIT Madras, India.
52 PEEK/Graphite Nanocomposites for EMI Applications (Best poster prize)
S. V. Gune, B.J. Deshpande, R.K. Goyal,
National Symposium for Materials Research Scholars”, IIT Bombay, Mumbai, May 09-10, 2009.
53 High performance polymer/ aluminum nitride particulate composites
R.K. Goyal, A.N. Tiwari Y.S. Negi,
2nd Int. symposium on Advanced Materials and Polymers for Aerospace and Defense Applications (SAMPADA-2008), Dec. 8-12, 2008, Pune, INDIA.
54 Preparation and characterization of high performance polymer matrix composites based on PEEK/AlN or Al2O3 dispersions
R. K. Goyal, A. N.Tiwari Y. S. Negi,
19th AGM of Materials Research Society of India (MRSI), Feb. 14-16, 2008.
55 Preparation and Properties of Polystyrene/Expanded Graphite Nanocomposites
R.K. Goyal, G.G.Umarji, U.P. Mulik.
10th International Conference on Advanced Materials (IUMRS-ICAM 2007), Organized by MRSI, IISc and JNCASR Bangalore, October 8-13, 2007.
56 Novel High Performance Polymer Matrix Composites for Electronics Substrates
R.K. Goyal, A.N. Tiwari, U.P. Mulik, Y.S. Negi.
10th International Conference on Advanced Materials (IUMRS-ICAM 2007), Organized by MRSI, IISc and JNCASR Bangalore, October 8-13, 2007
57 Preparation and Properties of Guest-Host System Based on 2-Methyl-4-nitroaniline and Polyvinyl alcohol
R.K. Goyal, S.R. Subhangi Y.S. Negi, U.P. Mulik, R.C. Aiyer.
10th International Conference on Advanced Materials (IUMRS-ICAM 2007), Organized by MRSI, IISc and JNCASR Bangalore, October 8-13, 2007
58 A facile fabrication and dielectric properties of polyethylene/ expanded graphite nanocomposites,
R.K. Goyal, U.P. Mulik
International Conference on Advances in Polymer Science and Technology (POLY-2008), Organized by Asian Polymer Association and IIT Delhi, January 28-31, 2008
59 High performance Poly(ether-ether-ketone) composites,
R.K. Goyal A.N. Tiwari, Y.S. Negi.
International Conference on Advances in Polymer Science and Technology (POLY-2008), Organized by Asian Polymer Association and IIT Delhi, January 28-31, 2008.
60 Organic guest host systems based on polymers and 2-Methyl-4-nitroaniline for optoelectronics applications,
R.K. Goyal, S.R. Damkale, U.P. Mulik, Y.S. Negi,
International Conference on Advances in Polymer Science and Technology (POLY-2008), Organized by Asian Polymer Association and IIT Delhi, January 28-31, 2008 (Accepted).
J. Dadge,
R.C. Aiyer,
61 Polycarbonate/exfoliated graphite nanocomposites for electronic applications
R. K. Goyal, G. G. Umarji U. P. Mulik,
International Conference on Nanomaterials for Electronics (ICNME-2006), Organized by Centre for Materials for Electronics Technology, Nov. 27-29, 2006, Pune, India.
62 Facile synthesis of conductive poly (methyl methacrylate)/ exfoliated graphite nanocomposites
R. K. Goyal, G. G. Umarji U. P. Mulik
International Conference on Nanomaterials for Electronics (ICNME-2006), Organized by Centre for Materials for Electronics Technology, Nov. 27-29, 2006, Pune, India.
63 Advanced polymer composites for electronics applications,
R. K. Goyal, A. N. Tiwari, U. P. Mulik, Y. S. Negi,
Indo-Singapore Symposium on Advanced Functional Materials [AFMS-2006], Organized by MRSI Mumbai Chapter, IIT Bombay, Institute of Materials (East Asia) and MRS Singapore, Feb. 24-26, 2006, Bombay, India.
64 High Performance Polymer Matrix Composites Based on AlN/PEEK for Electronics Applications
R. K. Goyal, Y. S. Negi, A. N. Tiwari
Proceeding of International Conference on Advances in Polymer Blends, Composites, IPNS and Gels: Macro to Nano Scales, March 21-23, 2005, Kottayam, India.
65 Preparation and Characterization of High Performance Al2O3/PEEK Composites,
R. K. Goyal, Y. S. Negi, A. N. Tiwari,
Proceeding of International Conference on Advances in Polymer Blends, Composites, IPNS and Gels: Macro to Nano Scales, March 21-23, 2005, Kottayam, India.
66 Preparation of Optical Grade Poled Polymer Films Based on m-Nitroaniline Doped PMMA and Their Second Harmonic Generation for Optoelectronic Device Applications
Y. S. Negi, R. K. Goyal, S. R. Damkale, P.V. Adhyapak, M. Islam R. C. Aiyer
Proc. of International Seminar on Advances in Polymer Technology [APT-04], Jan 16-17, 2004, CUSAT, Kochi, India.
67 High Performance Nanocomposites of PEEK and Al2O3: Preparation and Properties,
Y. S. Negi, A. N. Tiwari, R.K. Goyal,
3rd International Conference on ICMAT-2005, June 21-23, 2005, Singapore.
68 Synthesis and spectro-SHG evaluation of poled organic chromophore (m-NA) doped in PMMA/PC/Re-PS based freestanding films for photonics
Y.S. Negi, R.K. Goyal, M. Islam, R.C. Aiyer,
Proc. of 7th International Conference on Optoelectronics, Fiber Optics and Photonics: PHOTONICS-2004, Dec. 7-11, 2004, Cochin, India.
69 Second Harmonic Generation in NLO Active m-Nitroaniline/ Recycled Polystyrene System
M. S. Suresh-kumar, R.K. Goyal, Y. S. Negi et al.
Proc. of Int. Conf. on Polymers: MACRO-2004, December 14-17, 2004, Trivandrum, India.
70 Chemistry, Design and Development of Optical Grade m-Nitroaniline Crystals and Poled m-NA Doped PMMA Films and their Second Harmonic Generation for Optoelectronic Device Applications
Y.S. Negi, R.K. Goyal, S.R. Damkale P.V. Adhyapak,
Proc. of International Conference on Optoelectronic and Technology [ICOT-04], Jan 12-14, 2004, Jalgaon.
71 Toughening of Ceramics
R.K. Goyal R. Agrawal,
Accepted for the Presentation at TMS Annual Meeting, USA, 1995.
72 Preparation and Optical Characterization of New Poled
R.K. Goyal, Y.S. Negi,
National Conference on Materials Advances [NCMA-04], March 12-13, 2004, Kurukshetra,
Polymer Films Based on m-Nitroaniline Doped Polycarbonate and Their Applications in Optoelectronics,
M. Islam
R.C. Aiyer
Harayana.
73 Preparation and Properties of Novel NLO Active m-NA Doped Recycled Polystyrene,
M.S. Sureshkumar, R.K. Goyal, R.C. Aiyer Y.S. Negi,
Proceeding of Soc. of Polym. Sci., National Chemical Laboratory, Pune Chapter-2004
74 Study on Melt Flow Behavior of Blends Based on Nylon 12/ PET/p-HBA (LCP),
Y. S. Negi, R.K. Goyal,
S. R. Damkale,
Proceeding of National Seminar on Emerging Trends in Polymer Engineering [NSETPE 2004], March 18-19, 2004, Kottayam, Kerala, India
75 Synthesis and Properties of m-Nitroaniline (m-NA) Doped Optical Grade PMMA for Non-Linear Optics,
Y.S. Negi, R.K. Goyal, S.R. Damkale P.V. Adhyapak,
MRSI- 2003, Mumbai.
76 Preparation, Morphology and Melt Flow Properties of PP/PE/Flame Retardant Inorganic Fillers for Nanocomposites
Y.S. Negi, R.K. Goyal S.R. Damkale,
MRSI-2003, Mumbai
77 Morphology and Melt Flow Properties of Nylon 12-PET/p-HBA Blend,
Y. S. Negi, .K. Goyal, S.R. Damkale P.V.Adhyapak
MRSI-2002, Hyderabad.
78 Characterization of Fluorine and Non-fluorine Containing Polyimide Blends by Optical and Thermal Techniques,
Y. S. Negi, .K. Goyal, S. R. Damkale P.V.Adhyapak
MRSI-2002, Hyderabad.
79 Toughening of Advanced Ceramics
R.K. Goyal, R. Vijay
METTLE’95, September 7-8, 1995, REC, Trichi.
(Annexure –IV)
No. of Ph.D. Students = 1 completed + 5 pursuing
Degree Name of Student Title of thesis Year completed Major Achievements
Ph.D. Pramod Kumar Sain (ID: 2010RMT101)
Preparation and Studies on
Polycarbonate Matrix
Nanocomposites for Electronic
Applications” submitted to MNIT
Jaipur
Awarded in 2015
Published 5 papers In
International Journals
Ph.D. Patki Anita M. (MIS No.: 234710001)
Thermal, Mechanical and Dielectric
Properties of Polymer Matrix Micro-
and Nanocomposites for Electronics
Packaging
Admitted in July 2014 & Registered in July 2015
-
Ph.D. Dravid Sampada V (MIS No.: 234710006)
Preparation and Characterization of
High Performance Polymer Matrix
Composites for EMI shielding
application
Admitted in July 2014 & Registered in July 2015
-
Ph.D. Mandar Joshi (external candidate) 149997121003
Polymer matrix nanocomposites -------
(Gujarat Technological University)
01/05/2015 -
Ph.D. Sushant sale (MIS No.: 234710011)
Polymer matrix composites for
asbestos free rubber pad materials
Admitted in July 2014
-
Ph.D. Sanjiwan K. Bhoite (MIS No.: 234710007)
Wear Resistant Polymer
Nanocomposites
Admitted in July 2014
-
(Annexure –V)
No. of M. Tech. Students = 29 completed + 3 pursuing
Degree Name of Student
Title of thesis Year completed
Major Achievements
M. Tech. Preetam
Jadhav
Fabrication and Properties of High
Performance Polymer Matrix Composites
May 2009 1 paper
published in Int.
Journals
M. Tech. Jogindra N.
Sahu
(GATE Student)
Fabrication of High Performance PEEK/Clay
Nanocomposites and Their Properties
May 2010 1 paper
published in Int.
Journals
M. Tech. Amol Kadam
(UGC Project)
Study on Expanded Graphite Reinforced
Polymer Matrix Nanocomposites for EMI
Shielding Applications
June 2010 2 papers
published in Int.
Journals
M. Tech. Sunil Rohom
(UGC Project)
High performance Nickel filled polymer micro-
and nanocomposites for electronic
applications
June 2011 -
M. Tech. Kapil Rokade Fabrication of high performance polymer
micro- and nanocomposites for electronic
packaging application
June 2011 1 paper
published in Int.
Journals
M. Tech. A B Kulkarni Dielectric properties of polyvinylidene fluoride/
ferroelectric ceramic micro- and
nanocomposites
June 2011 1 paper
published in Int.
Journals
M. Tech. Mohan Yadav
(GATE Student)
Fabrication and properties of PTFE/ Matrix
Micro- and Nanocomposites
June 2011 2 paper
published in Int.
Journal
M. Tech. Aditi Kapadia
(GATE Student)
Fabrication of PEEK/SiO2 nanocomposites
and study on mechanical, dielectric, and
thermal properties
June 2012 2 paper
published in Int.
Journals
M. Tech. Archana Gupta
(ISRO project)
Fabrication of polycarbonate/graphite
Nanocomposites, and study of their electrical
properties for EMI shielding applications
Jun 2012 1 paper published in Int. Journal
M. Tech. Rishika Sulakhe
(TEQIP)
Development of PVDF/Nickel Composites for
EMI Shielding Applications
June 2012 1 paper published in Int. Journal
M. Tech. Roshan
Devanand
Gadve (GATE),
Preparation of Polyphenylene sulfide/Copper
Micro- and Nanocomposites by Planetary Ball
Milling and Their Properties
July 2013
M. Tech. Unmesh Vibhute
(ISRO project),
Physical Met.
Effect of Metallic Fillers on the Electrical
Properties of the Polycarbonate Matrix
Composites
July 2013
M. Tech. Sushant Sale
Fabrication of Polyphenylene sulfide/Clay
Nanocomposites and Study of Their
Properties
July 2013
M. Tech. Aditi Arvind
Thanki (TEQIP)
Study on Effect of Cubic and Tetragonal
BaTiO3 on the Properties of Polymeric
Nanocomposites
June 2014 1 paper published in Int. Journal
M. Tech. Rupa
Deshpande
(TEQIP)
Development of Polyaryletherketone/Nickel
Composites for Electromagnetic Interference
(EMI) Shielding Applications
June 2014
M. Tech. Joshi Manoj
Dattapant
Thermal and Tribological Properties of
Polyaryletherketone (PAEK) Based Micro-
and Nanocomposites
June 2014 1 paper published in Int. Journal
M. Tech. Dvij Vishnav
(TEQIP)
A study on High performance
Polyaryletherketone / ZnO Nanocomposites
for Varistor application
June 2014 1 paper published in IOP Conf. Series
M. Tech. Ranjit Chavan
Investigation of Tribological Behavior of Non-
Asbestos Brake Pad Materials Using
Tribometer
June 2015 Co-guide for External student of RIT, Shivaji University, M.S.
M. Tech. Chetan Kale
(TEQIP)
Fabrication of Polypropylene/Iron Composites
using Twin Screw Extruder and Their
Properties
June 2015 1 paper published in Int. Journal
M. Tech. Juhi Thanki
(TEQIP)
Electrical and Thermal Properties of Modified
BaTiO3 Filled PAEK Nanocomposites
June 2015
M. Tech. Hetal Parmar Effect of Processing Methods on Electrical
Properties of Iron Powder Filled Polymer
Matrix Composites
June 2015
M. Tech. Gaikwad Suyog
Digambar
(GATE)
Study on High performance Polymer
Nanocomposites Prepared by Planetary Ball
Mill
June 2016
M. Tech. Panchal
Shrikant
Rajabhau
Viscoelastic behavior of treated and untreated
ZnO Filled Polymeric Nanocomposites
June 2016
M. Tech. Kanthariya
Bhaveshkumar
Ishvarbhai
Electrical properties of three phase polymeric
nanocomposites
June 2016
M. Tech. Harishwar Kale Friction and Wear Analysis of untreated and
treated zinc oxide reinforced polymer
nanocomposites
June 2016 Co-guide
M. Tech. Dnyaneshwar To improve the machinability of CuSn base June 2016 Co-guide
Kadlag alloy
M. Tech.
(GATE)
Bhosale
Shubham Dinkar
Electromagnetic interference shielding
effectiveness of polyaryletherketone/graphene
nanocomposites
June 2017
M. Tech.
(GATE)
Nawale Rohit
Sanjay
Study on polymer nanocomposites for
pressure sensors
June 2017
M. Tech.
(GATE),29
Todkar Sachin
Mahadeo
Effect of CaCO3 nanoparticles on mechanical
and thermal properties of polymer
nanocomposites
June 2017
(Annexure –VI)
No. of B. Tech. Students = 51 (or 31 projects)
Degree Name of Student
Title of thesis Year completed
Major Achievements
B. Tech. S. D. Samant &
A. K. Thakar
Fabrication of high performance polymer/
expanded graphite nanocomposites
May
2009
1 paper published in Int. Journal
B. Tech. A. M. Lokhande
S. D. Mule
Effect of particle sizes on microhardness
Properties of Polymer Matrix Composite
May
2009
-
B. Tech. R.B. Kulkarni
D.V. Lavankar
Fabrication and properties of PEEK/AlN
composite
May
2009
-
B. Tech A. A. Harke E. R. Kuvar
Effect of nanoclay particles on mechanical
properties of polystyrene
May
2009
-
B. Tech. B.J. Deshpande
& S.V. Gune
Fabrication and electrical properties of
PEEK/EG nanocomposites
May
2010
1 paper
submitted to Int.
Journal
B. Tech. K.R. Kamble &
S.S. Nene
Fabrication and properties of high
performance polymer/copper composites
May
2010
1 paper published in Int. Journal
B. Tech. Vinit V. Madhav
& P.R. Pakankar
Fabrication and properties of PEEK/BaTiO3
composites
May
2010
1 paper
published in Int.
Journal
B. Tech. Suraj D. Jadhav Characterization of Al alloys used in TATA
motors
May
2010
-
B. Tech. V Patil & N
Purohit
Fabrication and Characterization of
PMMA/Clay Nanocomposites
May 2011
-
B. Tech. S Harde & A
Maharanwar
Fabrication and Properties of
Polycarbonate/Boron Nitride Composites for
Electronics Aplications
May 2011
-
B. Tech. S. Katkade & D.
Mule
Fabrication and study on Dielectric properties
of PMMA/ BaTiO3 composites
May 2011
1 paper
published in Int.
Journal
B. Tech. Ashwini and
Ankita
Effect of Catalyst Formulation on CVD
sythesis of carbon Nanotubes
May 2011
-
B. Tech. A. B. Raut & S.
Prasad Pramod
Fabrication of PPS/BaTiO3 Nanocomposites
by P/M Route and Their Properties
May 2012
-
B. Tech. B. B. Joshi & A.
H. Namjoshi
Fabrication of PVDF/ BaTiO3 Nanocomposites
for Electronic Applications
May 2012
1 paper published in
Proc. of IEEE
B. Tech. Sundaresh Shlok
& D. S. Kini
Fabrication and characterization of PPS/AN
nanocomposites for Printed Circuit Boards
May 2012
-
B. Tech. Bharade M.A.
Purohit T.M.
Fabrication and study on properties of
polyphenylene sulfide/Silica Nanocompsoites
May 2013
-
B. Tech. Sarang P.
Kulkarni
Upendra K
Wanmali
Fabrication and characterization of high
performance PEEK/BN composites as a next
generation PCB substrate material
May 2013
-
B. Tech. Rajput Dhiraj
Kamble Lakhan
Fabrication and properties of PPS/SWCNT
Nanocompsoites
May 2013
-
B. Tech Deshpande Siddharth P., Singare Sumit S., Sabe Pooja S.
Synthesis of zirconia nanopowder using
planetary ball milling method and its polymeric
nanocomposites
May 2014
1 paper published in Int.
Journal
B. Tech Pantawane MV, Pande OR, Zadgaonkar SS
Study on polymer/ZnO nanocomposite for
varistor application
May 2014
-
B. Tech Saloni Pendse, Santosh Dagade
Synthesis of barium titanate nanopowder using planetary ball mill
May 2015
1 paper published in Int.
Journal
B. Tech Animesh Bora, Pallavi Gaikwad
Synthesis of iron nanopowder by planetary
ball mill and its polymeric nanocomposites
May 2015
1 paper published in Int.
Journal
B. Tech Riya Gupta, Vaibhav Awachat
Electrical properties of polyaryletherketone-
barium titanate nanocomposites
May 2015
-
B. Tech
Komal Sawarkar,
Akshay Mhaiske
Enhanced electrical and thermal properties of
iron-polyvinylidene fluoride composites
May
2015
-
B. Tech Akashi Chavan
(111211011)
Three phase nanocomposites for electronic
applications
May
2016
-
B. Tech Pranav Desai
(111211041)
Viscoelastic behavior, morphology and
microhardness of PC/CaCO3 nanocomposites
May
2016
-
B. Tech Janhavika Sonar
(111211050)
Improvement In Wear Resistance of
Polycarbonate/Zinc Oxide Nanocomposites
May
2016
-
B. Tech. Narayan
Shirolkar
(111211048)
Measurement of Electromagnetic Interference
Shielding Effectiveness of Polymer/Graphene
Nanocomposites
May
2016
-
B. Tech. Indrayani Kadu &
Shreshtha Mishra
Novel Three-Phase PAEK/BaTiO3/Graphene
Nanocomposites for Embedded capacitor
Applications
May 2017
-
B. Tech. Rutuja C. Pande &
Vaishnavi V. Patki
Effect of Incorporating ZnO Nanoparticles in
Polycarbonate on Antimicrobial Activity
May 2017
-
B. Tech. (31)
Amit Korde &
Pratik Nimbalkar
Polymer/Graphene Nanocomposites with Low
Percolation Threshold for Elecctromagnetic
Interference Shielding
May 2017
-
AWARDS / PRIZES / HONOURS
1. Received “Alumni Distinguished Faculty Fellow (ADFF) Awards” for the years 2010-2012 and
2015-2017 from the “Alumni Association of College of Engineering, Pune”.
2. Co-chaired a technical session in 6th International and 27th All India Manufacturing Technology,
Design and Research Conference, AIMTDR 2016 during 16th to 18th December 2016, held at
CoEP, Pune (India).
3. Subject expert for evaluating progress of Ph. D. /M. Tech. candidates in Department of Materials
Science and Technology, DIAT, Pune (M.S.), India.
4. Recognized Ph.D. Research Guide from Savitribai Phule Pune University (SPPU), Maharashtra,
India.
5. External examiner for evaluating Ph.D. Thesis of other universities.
6. Chairperson: Chaired a session on “Materials for electronics applications” in the National
Conference on Materials for Electronic applications (NCMA-14) held from 30 Jan to 1 Feb., 2014 at
College of Engineering Pune.
7. Best Oral Presentation Award to M. Tech. student (Ms. Aditi Kapadia) for her work titled
“Advanced High Performance Polymer Matrix Nanocomposites for Printed Circuit Boards” presented
in 1st International Conference on Functional Materials for Defence (ICFMD-2012) organized by
Defence Institute of Advanced Technology (DIAT), Pune, Naval Post-Graduate School, USA and
Office of Naval Research (Global), USA, May 18-20, 2012.
8. Best Ph.D. Thesis Prize in Materials Science for the Year 2007 by Materials Research Society of
India. Delivered G.C. Jain Memorial Lecture in MRSI 2008, Feb. 14-16, 2008, Trivandrum, Kerala.
9. 2nd Prize for Oral Presentation to M. Tech. student (Mr. J.N. Sahu) for his work presented in
PAPYRUS, MELANGE 2010 organized by Vishwa Karma Institute of Technology, Pune
10. 2nd Best Poster Prize to M. Tech. student (Mr. J.N. Sahu) for his work presented in National
Symposium for Materials Research Scholars and Workshop on Advanced Characterization
Techniques. 6-8 May 2010.
11. Best Poster Prize to B. Tech students (Miss S. V. Gune and Miss B.J. Deshpande) for their work
presented in National Symposium for Materials Research Scholars”, IIT Bombay, Mumbai, May 9-10,
2009.
12. Third Best Poster Prize to B. Tech students (Miss K. Sweta and Mr Mule) for their work presented in
technical event “Mind-Spark 2010” organized by COEP Pune, Oct 8-11, 2010.
13. Selected in the list of Marquis Who's Who (VIP Number is: 35663412)
14. Treasurer (from 2010-till date) of “The Indian Institute of Metals (IIM)” Pune chapter
15. Recipient of merit cum scholarships (2 times)
16. Recipient of GATE score – 1996 and First cross scout/guide certificate
17. Reviewed a chapter of book entitled “Recent advances in polymer nanocomposites”, Nova Sci. Pub.,
Inc. USA, 2007.
18. Delivered several invited talks/guest lectures in conferences and short term courses.
19. Reviewer of more than 10 peer reviewed International Journals.
Memberships of Professional Societies
Life member of “The Indian Institute of Metals (IIM)” Pune chapter (PO1-LM-41528).
Life member of “Powder Metallurgy Association of India (PMAI) [No.: LM 79812].
Life member of “The Society of Polymer Science (INDIA)” [PUN 0227].
Editorial Board Member of “Journal of Materials Science & Surface Engineering (JMSSE)”
Faculty Development Program Organized by R K Goyal: 6
Sr.
No.
Title of the course Name of the
Coordinator
Period Venue
1 AICTE (under QIP) Sponsored One
Week Short Term Training Program
(STTP) on “Characterisation of
Micro- and Nanomaterials”
Prof. R.K. Goyal March 20 - 24, 2017
(5 working days)
College of
Engineering, Pune
(Total number of
participants: 39)
2 TEQIP Phase-II Sponsored One
Week Faculty Development Program
(FDP) on “A Workshop on
Characterization of Macro-, Micro- and
Nanomaterials”
Prof. R.K. Goyal June 2-6, 2014
(5 working days)
College of
Engineering, Pune
(Total number of
participants: 32)
3 TEQIP Phase-II Sponsored One
Week Faculty Development Program
(FDP) on “Nanomaterials and
Nanocomposites”
Prof. R.K. Goyal Dec. 2-6, 2013
(5 working days)
College of
Engineering, Pune
(Total number of
participants: 55)
4 TEQIP Phase-II Sponsored One
Week Faculty Development Program
(FDP) on “Nanomaterials and
Nanocomposites”
Prof. R.K. Goyal Dec. 3-7, 2012
(5 working days)
College of
Engineering, Pune
(Total number of
participants: 65)
5 Conducted “Workshop on Materials
Characterization & Testing
(WMCT 2004),
Dr. Y. S. Negi
and
Dr. R.K. Goyal
February 4, 2004. C-MET, Pune
6 Conducted “Workshop on Materials
Characterization & Testing
(WMCT 2003),
Dr. Y. S. Negi
and
Dr. R.K. Goyal
February 21,
2003.
C-MET, Pune
Invited talk/Guest-Lectures: 21
2011-2012: 03
1. Delivered a Guest-Lecture on “Preparation, Properties and Applications of
Nanomaterials” at Vishwakarma Institute of Information Technology, Pune, Sep. 22,
2011.
2. Delivered an Invited Talk on “Preparation, Properties and Applications of Novel
Polymer Matrix Nanocomposites” in International Conference on Nanomaterials and
Nanotechnology (ICNANO 2011), University of Delhi, Delhi, Dec. 18-21, 2011.
3. Delivered an Invited Talk on “High Performance Polymer Matrix Micro- and
Nanocomposites: New Electronic Packaging Substrate Materials in 2nd International
Conference on Polymer Processing and Characterization (ICPPC – 2010): January
15-17, 2010, Kottayam, Kerala, India.
2012-2013: 03
4. Delivered an expert talk on “Synthesis, Properties and Applications of
Nanomaterials: Their Challenges” in TEQIP funded one week short term course on
“Structure, Properties and Applications of Engineering Materials” organized by the
department of Metallurgical and Materials Engineering, Malaviya National Institute
of Technology, Jaipur (Rajasthan) during July -05, 2013.
5. Delivered an Invited Lecture on “Polymeric Micro- and Nanocomposites for
Tribology Applications” in Advances in Heat and Cryogenic Treatment (AHCT
2012) at Marathwada Institute of Technology, Aurangabad (M.S.) conducted by IIM
Pune Chapter, July 7-8, 2012.
6. Delivered expert talks on “Nanomaterials and Nanocomposites: Synthesis,
Properties and Applications” in one week Faculty Development Program (FDP)
sponsored by TEQIP and held during December 3-7, 2012.
2013-2014: 04
7. Delivered a Technical Talk (as resource person) on “Polymeric Nanocomposites:
Their Preparation, Properties and Applications” in TEQIP sponsored 1 Week FDP
course on “Nanomaterials Characterization and Application in Devices” held at
College of Engineering, Pune during 7-11 April, 2014.
8. Delivered a Guest Lecture on “Introduction to Nanomaterials and Magnetic
Materials” at Vishwakarma Institute of Information Technology (VIIT), Kondhwa,
Pune, Sep. 14, 2013.
9. Delivered a Technical Talk on “Nanomaterials and Their Applications” in AICTE
sponsored 2 Weeks short term course (STC) on “Materials Engineering and
Industrial Applications: Hybrid Nanocomposites for Photonics, Energy and
Electronic Devices” held at Indian Institute of technology Kharagpur during 9-22
Nov., 2013.
10. Delivered expert talks on Nanomaterials and Nanocomposites: Synthesis,
Properties and Applications, one week Faculty Development Program (FDP)
sponsored by TEQIP and held during December 02-06, 2013.
2014-2015: 06
11. Delivered a Guest Lecture on “Nanocomposites materials” at Sinhgad Academy of
Engineering, Kondhwa, Pune, 11th August 2014.
12. Deliver a Keynote Talk in a half day workshop on ‘Mechanical Testing and
Characterization of Materials’ organized jointly by M/s Zwick Roell Group and
Department of Metallurgical and Materials Engineering, NIT Surathkal, Mangalore
on 31st October 2014.
13. Delivered a Guest Lecture on “Advances in Material Technology” in
MECHASTREAM 2014-2015 at Govt. Polytechnic Nashik, 6th January, 2015.
14. Delivered an expert lecture as resource person on “Characterization of Thermal
and Electrical Properties of Materials” in MSBTE sponsored 1 week Content
Updating Training Program on “Modern Techniques of Material testing (MTMT)”
organized by Govt. Polytechnic Nashik, January 5-9, 2015.
15. Delivered a Guest Lecture on “Nanotechnology and Applications” at Pune District
Educational Society’s College of Engineering Pune, 19th March 2015.
16. Chaired a session on “Engineering Materials and optimization” of International
Conference on “Recent Advances in Mechanical Engineering” (ICRAME-2015), 26-
28 Feb, 2015 organized by G. H. Raisoni College of Engineering &Management,
Wagholi, Pune.
2015-2016: 03
17. Delivered a Guest Lecture on “An Overview on Properties and applications of
Nanotechnology” at D. Y. Patil, College of Engineering, Pune, 08th July 2015.
18. Delivered a Guest Lecture on “Advanced Materials" at Pimpari Chinchwad, College
of Engineering, Pune, 13th August 2015.
19. Delivered a Guest Lecture titled “Magic Effect of Nanosize, Synthesis, and
Applications of Nanomaterials and their Challenges” in a 2 days State level
seminar on “Green approach in material Chemistry organized by BJS’s ASC
College, Wagholi, Pune, 8-9 Feb., 2016.
2016-2017: 02
20. Delivered an expert lecture on “What have we learnt from nature about
nanotechnology?” in ISTE approved one week STTP on recent advances in
nanomaterials, nanotechnology and nanofabrication, held at Smt. Kashibai Navale
College of Engineering, Pune, Dec., 11-16, 2016.
21. Delivered an expert lecture on “Multifunctional Polymeric Nanocomposites” in an
ISTE approved one week STTP titled “Advances in Engineering Materials and
Testing Techniques” held at Mechanical Engineering Department, Government
Polytechnic, Pune, January 16-20, 2017.
Expert Lectures delivered as a Resource Person in FDP/ CEP/ Workshops
S.
N.
Title of the course Name of the
Convener
Period Venue
1 Continuous Education Programme on
PZT/Smart Materials/Electro ceramics
Title of talk: “High Performance Polymer Micro-
and Nanocomposites for Electronics
Applications”
Dr H H
Kumar
Feb. 5, 2010
(1 Week)
Armament R & D Est.
(ARDE), Pune, DRDO
Lab
2 National Workshop on Nanoscience and
Technology (NWNST), Title of talk:
“Preparation, Properties and Applications of
Novel Polymer Matrix Nanocomposites”
Dr. P Kumar
and Prof.
K.K. Kokate
January 6-7,
2012.
MIT-COE, Pune
3 One Day Seminar on Recent Advances in
Engineering Materials Science.
Prof. N N
Shejwal
March 2,
2012.
All India Shri Shivaji
Memorial Society's
(AISSMS), College of
Engineering Pune
4 Short term training programme (STP) on
“Advances in Composite Materials, Title of
talk: Recent Trends in Micro- and
Nanocomposites”
Dr SS
Ahankari
June 25-29,
2012
Annasaheb Dange
College of Eng. and
Technology, Ashta
(Sangli, M.S.)
5 One week FDP course on “Micro and Nano
Technology” Title of talk: “Fabrication and
Applications of Micro- and Nanomaterials
and Their Challenges
Dr. P S Patil June 24-28,
2013.
Rajarambapu Institute
of Technology (RIT),
Islampur (Sangli,
Maharashtra)
6 TEQIP sponsored 1 week FDP course on
“Nanomaterials Characterization and
Application in Devices”, Title of talk:
Polymeric Nanocomposites: Their
Preparation, Properties and Applications”
Dr Jagdish
Dadge
April 7-11,
2014
College of Engineering
Pune (COEP)
7 One week FDP course on “Advanced
Materials for Engineering Applications”,
Title of talk: “Preparation, characterization
and Applications of Polymer Matrix, Micro
and Nanocomposites”
Prof. Dravid December
10-14, 2013.
Sinhgad Technical
Education Society’s
Department of
Chemical Engineering
8 Short Term Course for Industrial Staff Title
of talk: Characterization of materials
Prof.
Galphade
25th June
2014
Jon Deere, Pune
9 MSBTE sponsored 1 week Content Dr. A.A. January 5-9, Govt. Polytechnic
Updating Training Program on “Modern
Techniques of Material testing (MTMT)”,
Title of talk: Characterization of Thermal
and Electrical Properties of Materials”
Gadhikar 2015 Nashik
10 Delivered chief guest lecture in FDP on
“Advanced trends in Engineering and
Education” , Title: Past, Present and Future of
Nanotechnology: Their challenges
Col S K Joshi June 14-16,
2016
DY Patil CoE, Akurdi,
Pune
11 Delivered an expert lecture on “What have we
learnt from nature about nanotechnology?” in
ISTE approved one week STTP on recent
advances in nanomaterials, nanotechnology
and nanofabrication.
Mr. Hament
Deore
Dec., 11-16,
2016.
Smt. Kashibai Navale
College of Engineering,
Pune
12 Delivered an expert lecture on “Multifunctional
Polymeric Nanocomposites” in a ISTE
approved one week STTP titled “Advances in
Engineering Materials and Testing Techniques”
Dr. A.A.
Gadhikar
January 16-
20, 2017
Government
Polytechnic, Pune
Refresher/ orientation/ faculty development course attended: 16
Sr.
No.
Title of the course Name of the
Faculty
Period Venue
1 AICTE sponsored One Week STTP on
“Excellence in Maintenance Engineering”
Prof. R.K.
Goyal
March 1-6,
2017 (1 Week)
College of
Engineering, Pune
2 One week course on “Slag Design in
Metallurgical Processes” Sponsored by
MHRD, GoI
Prof. R.K.
Goyal
August 22-28,
2016 (1 Week)
College of
Engineering, Pune
3 One week TEQIP sponsored faculty
development program on “computational
fluid dynamics (CFD) for beginners”
organized under centre of excellent for
smart and renewable energy systems
(CoE-SRES)
Prof. R.K.
Goyal
June 6-10,
2016 (1 Week)
College of
Engineering, Pune
4 Four days training program on "Scanning
Electron Microscopy"
Prof. R.K.
Goyal
Sept.2-5,2015
TRDDC/COEP, Pune
5 IPR-A Journey to Enrichment” Prof. R.K.
Goyal
15th May 2015 NASSCOM at ICC
Pune
6 Faculty development workshop on
“Microsoft Technology Enriched
Instruction”
Prof. R.K.
Goyal
20th March
2015
College of
Engineering, Pune
7 BRNS-TEQIP sponsored 2 Weeks Faculty
Development Program (FDP) on
“Overview of Nuclear Engineering and Its
Applications”
Prof. R.K.
Goyal
June 16-27,
2014 (2
Weeks)
College of
Engineering, Pune
8 One week TEQIP sponsored faculty
development program on “Nanomaterials
Characterization and Application In
Devices”.
Prof. R.K.
Goyal
April 7-11,
2014 (1 Week)
College of
Engineering, Pune
9 One week TEQIP sponsored faculty
development program on “corrosion and
surface engineering”
Prof. R.K.
Goyal
Dec. 10-15,
2014 (1 Week)
College of
Engineering, Pune
10 AICTE sponsored 2 Weeks STC on
“Materials Engineering and Industrial
Applications: Hybrid Nanocomposites for
Photonics, Energy and Electronic
Devices”
Prof. R.K.
Goyal
Nov.11-22,
2013
(2 Weeks)
Materials Science
Centre, IIT
Kharagpur
11 Half day workshop on “National
Programme on Technology Enhanced
Learning”
Prof. R.K.
Goyal
26th Sep. 2013 College of
Engineering, Pune
12 One week TEQIP sponsored faculty
development program on “corrosion and
surface engineering”
Prof. R.K.
Goyal
Dec. 10-15,
2012 (1 Week)
College of
Engineering, Pune
13 One week TEQIP sponsored faculty
development program on “Technical
Communication Skills”
Prof. R.K.
Goyal
May 2-6, 2011
(1 Week)
College of
Engineering, Pune
14 4th SERC School on Texture and
Orientation Imaging Microscopy (OIM)”
Prof. R.K.
Goyal
May 12-16,
2009 (1 Week)
IIT Bombay
15 Workshop for Operations Research
Teachers
Prof. R.K.
Goyal
Sep. 10-18,
2008 (2 Week)
IIM Ahmedabad
16 Workshop on Creativity Prof. R.K.
Goyal
April 2008
(2 days)
College of
Engineering, Pune
Editorial Board Member of Peer Reviewed Journals
Editorial Board Member of “Journal of Materials Science & Surface Engineering (JMSSE)”
Reviewer of International Journals
Undersigned is the reviewer of following international journals:
(1) Materials Science & Engineering: Part B (Elsevier)
(2) Journal of Polymer Physics: Part B (Wiley-Interscience)
(3) Journal of Materials Science (Wiley-Interscience)
(4) Polymer Composites (Wiley-Interscience)
(5) Polymer Engineering and Science (Wiley-Interscience)
(6) Advanced Materials Letters (VBRI Press)
(7) Materials Chemistry and Physics (Elsevier)
(8) Chemistry Letters (Japan Society and Technology Information Aggregator)
(9) Journal of Electronic Materials
(10) Journal of Materials and Design
(11) Tribology Transactions
List of Courses Developed (& taught) for UG and PG programmes
(i) Polymers and Composites (Theory and Lab for UG)
(ii) Advanced Composites (Theory for PG)
(iii) Nanomaterials and Nanotechnology (Theory for UG/PG)
(iv) Nanotechnology (Theory): Institutional Elective (UG)
(v) Materials Characterization (Theory and Lab for UG)
(vi) Diffusion and Kinetics (Theory for PG)
(vii) Phase Transformation of Metals and Alloys (Theory for PG)
Other Academic Activities
(i) Developed “Polymer composites, nanocomposite and characterization laboratories” for the
UG/PG/Ph.D. students.
(ii) Coordinator for departmental M. Tech. admission (2011-2016)
(iii) Core Committee member for M. Tech. admission (2017-2018)
(iv) B. Tech. seminar coordinator (2009-2010).
(v) Treasurer of “The Indian Institute of Metals (IIM) Pune Chapter (2011-2018)
(vi) Image Analyzer In-charge (2009-2013)
(vii) In-charge of “Nanomaterials Laboratory”
(viii) Faculty Advisor (since 2010)
International and National Conferences Attended are:
a. IIM NMD ATM 2014, Organized by IIM Pune Chapter and College of Engineering Pune, Nov., 12-15,
2015 (Oral).
b. EMSI-2014 organized by University of Delhi, July 9-11, 2014 (Oral).
c. ICONSAT-2012, organized by ARCI, Hyderabad, Jan 20-23, 2012 (Oral)
d. ICNANO 2011, organized by University of Delhi, Delhi, 18-21 Dec., 2011(Oral)
e. PM-12, organized by Powder metallurgy association of India (PMAI), Mumbai, Feb 2-4, 2012 (Oral)
f. Continuous Education Programme (CEP-2010), Pune (Invited Talk)
g. MRSI-2010 (Poster)
h. ICPCC-2010, MGU Kottayam (invited Talk)
i. APA-2009, IIT Delhi
j. SAMPADA-2008, Dec. 8-12, 2008, Pune, India
k. MRSI 2008, Feb. 14-16, 2008, Trivandrum, Kerala [Delivered Jain memorial lecture].
l. Represented C-MET in ELITEX 2008 organized by MIT, Govt. of India at N. Delhi during Jan. 16-17,
2008
m. POLY 2008, January 28-31, 2008, IIT Delhi, India [Poster].
n. IUMRS-ICAM 2007, October 13-18, 2007, IISc/JNCASR Bangalore, India [Oral]
o. AFMS 2006, Indo-Singapore conference, February 24-26, 2006, IIT Bombay, India
p. ICNME 2006, November 27-29, 2006, C-MET Pune, Pune, India.
q. ICAMDD 2005, December 14-16, 2005, IIT Kharagpur/GIT Anlanta, Goa India [Oral].
r. Microstructure 2005, BARC Mumbai, December 1-2, 2005, India [Poster].
s. ICBC 2005, March 21-23, 2005, MGU, Kottayam, India [Oral]
t. APT 2004, January 16-17, 2004, CUSAT, Cochin [Oral].
u. MRSI 2003, February 11-13, 2003, BARC, Mumbai [Poster].
v. MRSI 2002, February 9-11, 2002. IICT & DMRL, Hyderabad [Poster].
Name of Four references with full information for correspondence
1. Dr. A. N. Tiwari
Ex. Professor, Department of Met. Eng. & Mat. Sci. (MEMS)
Indian Institute of Technology (IIT) Bombay, Powai
Mumbai – 400 076 (M. S.) – INDIA
E-mail: [email protected]
Mobile: 9987598990
2. Dr. Y. S. Negi
Professor-In-Charge
Polymer Science and Technology, Indian Institute of Technology (IIT) Roorkee
Paper Mill Road, Saharanpur – 247001, Uttar Pradesh (India)
E-mail: [email protected]
Mobile: 9319605330
3. Dr. U P Mulik
Ex. Scientist ‘F’, Head of Polymer Laboratory
Centre for Materials for Electronics Technology (C-MET)
Department of Information Technology, Govt. of India
Panchwati, Off Pashan Road, Pune – 411 008 – INDIA
E-mail: [email protected]
Tel.: 020 – 25899273, Fax: 020 – 25898180, Mobile: 09881109135
4. Dr. (Mrs.) R. C. Aiyer
Professor, Department of Physics,
University of Pune, Pune - 411007
Email: [email protected] Tel: 020-25692678, Ext 301, Fax: 020-25691684,
Mobile: 09881019674