Product : R3XHT (Part A), Date : 5 January 2013 MSDS No. : 21112012

1

MATERIAL SAFETY DATA SHEET

1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY / UNDERTAKING

Product Name: R3XHT (Part A),

Date : 5 January 2013 MSDS No. : 21112012

Company:

3X ENGINEERING

9 Av. Albert II

98000 Monaco

Tel. : +377 92 05 79 81 Fax : +377 92 05 72 71

(mon. fri. 8 a.m. 5 p.m.)

E-mail (questions) : 3x@3xeng.com

Supplier:

For Chemical Emergency:

ORFILA : 01.45.42.59.59

2. COMPOSITION / INFORMATION ON INGREDIENTS

Chemical characterization: Modified epoxide resin on basis Bisphenol-A-Epichlorhydrinresin especially formulated on

non-corroding steel-alloy powder and+ AI2O3+ SiC

Dangerous components: Bisphenol A-epichlorohydrin resin

CAS-Number: 25068-38-6

NLP: 500-033-5

Symbol(s): Xi, N

R-phrase(s): 36/38, 43, 51/53

Concentration: > =95 %

3. HAZARDS IDENTIFICATION

R 36/38 Irritating to eyes and skin.

R 43 May cause sensitisation by skin contact.

R 51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

4. FIRST AID MEASURES

General advice: Move out of dangerous area. Take off all contaminated clothing immediately.

Eeye contact: Rinse immediately 15 minutes with plenty of water, also under the eyelids. Consult a doctor.

Skin contact: If you have skin contact, you must wash off with much water and soap. If irritation persists,

consult a doctor.

Inhalation : Move to fresh air. Consult a physician after significant exposure. Ingestion: Prevent vomiting if possible. Clean mouth with water and drink afterwardsplenty of water. Call

a physician immediately.

5. FIRE-FIGHTING MEASURES

Suitable extinguishing agents: Water spray, foam, CO2, extinguishing powder

Special hazards during fire fighting: In case of fire toxic gases may be built

Protective equipment: In the event of fire, wear self-contained breathing apparatus. Wear personal

protective equipment.

Additional information Water mist may be used to cool closed containers, risk of bursting. Extinguishing

water is to be disposed of in accordance with local authority regulations

6. ACCIDENTAL RELEASE MEASURES

Person precautions: Keep unprotected people away. Use personal protective equipment. Avoid

contact with skin, eyes and clothing.

Product : R3XHT (Part A), Date : 5 January 2013 MSDS No. : 21112012

2

Environmental precaution: Do not allow reach sewage system or water bodies. Do not allow to enter the

ground/soil.

Methods for cleaning up: Soak up with inert absorbent material e.g. sand, silica gel, acid binder, uni-versal binder, sawdust

Additional advice: Inform fire brigade or police if the product has penetrated into water or into

the sewerage or if soil or plants have been contaminated.

7. HANDLING AND STORAGE

Handling

Safe handling advice: Ensure adequate ventilation, especially in confined areas. Avoid contact with skin and eyes.

Handle in accordance with good industrial hygiene and safety practice.

Advice on protection against

fire and explosion: No special precautions necessary if used correctly

Requirements for storage

areas and containers: Keep container tightly closed. Keep in a well-ventilated place.

Advice on common storage: No materials to be specially mentioned

8. EXPOSURE CONTROLS PROTECTION

Additional information on the

lay-out of technical plant: No special precautions necessary if used correctly

Components with workplace control parameters

Components:

CAS-Number:

Value:

Release notes:

Basis:

Personal protection equipment

Respiratory protection: Breathing apparatus only if aerosol or dust is formed. No personal respiratory

protective equipment normally required.

Hand protection: Polyvinyl alcohol or nitrile-butil rubber gloves

Eye protection: safety glasses

Skin and body protection: Long sleeved clothing, rubber or plastic apron

Hygiene measures: Avoid contact with skin and eyes. Wash hands before breaks and the end of

workday. Keep away from food and drink.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance

Appearance: pasty or brushable

Form:

Colour: grey

Odour: almost odourless

Other data

Boiling point/range: < 200C

Flash point: > 200C (DIN 53213)

Ignition temperature: approx. 460C

Upper explosion limit:

Lower explosion limit:

Vapour pressure: at 20C > 0.1 hPa

Density: at 20C > 2,5 g/cm3

Solubility/qualitative:

Water solubility: at 20C >0.1g/l

pH-value:

Viscosity, dynamic: 400000 mPa

10. STABILITY AND REACTIVITY

Thermal decomposition / conditions

to be avoided: No decomposition if stored and applied as directed.

Hazardous reactions: Exothermic reaction with amines and strong acids.

Hazardous decomposition products: NO decomposition if stored and applied as directed.

11. TOXICOLOGICAL INFORMATION

Acute oral toxicity: LD50 rat 10000 mg/kg (for main component)

Product : R3XHT (Part A), Date : 5 January 2013 MSDS No. : 21112012

3

Acute inhalation toxicity:

Acute dermal toxicity: LD50 rat > 2000 mg/kg

Skin irritation May cause skin irritation in susceptible persons.

Eye irritation: Contact with eyes may cause irritation.

Sensitization: May cause sensitization of susceptible persons by skin contact.

Further information: This product was not tested itself. The above mentioned values are results

of a product with comparable formulation.

Human Experience: Repeated or prolonged skin contact may cause allergic reactions with susceptible

persons.

12. ECOLOGICAL INFORMATION

Elimination information (persistence and degradability)

Biodegradability: The product has not been tested. Not readily biodegradable.

Physicochemical removability: Most parts can be separated mechanically in a sewage plant.

AOX:

Additional information: Do not allow to reach sewage system or water bodies. Do not allow to enter

the ground/soil.

13. DISPOSAL CONSIDERATIONS

Product: Remove according to local authority recommendations, e.g. convey to a suitable incinerator.

Package not cleaned: Empty containers should be transported/delivered using a registered waste

carrier for local recycling or waste disposal.

14. TRANSPORT INFORMATION

Land transport: UN-No. 3082

Proper shipping name 3082 Environmentally hazardous substance, liquid n.o.s. epoxy resin

Class 9

Item 11c ADR

HI Number 90

Sea transport: UN-No. 3082

Proper shipping name Environmentally hazardous substance, liquid n.o.s.(epoxide resin)

Class 9

Packing group 3

EmS -

MFAG

Marine pollutant P

Air transport: UN-No. 3082

Proper shipping name Environmentally hazardous substance, liquid n.o.s. (Epoxy resin)

Class 9

Packing group III

15. REGULATORY INFORMATION

Labelling according to EEC Directive

Hazard-determining

components of labelling: Bisphenol-A-Epichlorhydrinresin

Symbol(s): Xi Irritant

N Environment

R-phrases: R 36/38 Irritation to eyes

R 43 May cause sensitisation by skin contact

R 51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic

environment.

S-phrases: S 28 In case of contact with skin, rinse immediately with plenty of water and soap, seek medical

advice

S 37/39 Wear suitable gloves and eye/face protection

S 61 Avoid release to the environment. Refer to special instructions/Safety Data Sheets. Contains

epoxy constituents. See information supplied by the manufacturer.

16. OTHER INFORMATION

These information are based on the present state of our knowledge and do therefore not guarantee certain properties. However, it shall not

constitute a guarantee for any specific product feature and shall not establish a legally valid contractual relationship.