Rescued and LovedRescued and LovedRescued and LovedRescued and Loved

Finished Quilt Version #1 Size: 47” x 67”Finished Quilt Version #2 Size: 65” x 85”

49 West 37th Street, New York, NY 10018tel: 212-686-5194 fax: 212-532-3525

Toll Free: 800-294-9495www.henryglassfabrics.net

Please check our website for pattern updates before starting this project.

Vers

ion

#1

Vers

ion

#2

Quilt 1Skill Level: Intermediate

Qui

lt D

esig

ns b

y Le

anne

And

erso

n &

Kay

tlyn

Kueb

ler

A Free Project SheetNOT FOR RESALE

By Leanne Anderson & Kaytlyn Kuebler

Rescued and LovedFabrics in the Collection

Select Fabrics from Houndstooth Basics

Select Fabrics from Starry Basics

Finished Quilt Version #1 Size: 47” x 67”Finished Quilt Version #2 Size: 65” x 85”

Quilt 1

Tossed Allover CharactersTeal – 9391-76

Tossed Allover CharactersRed – 9391-88

Border StripeRed – 9392-88

WordStone – 9393-42

WordNavy – 9393-77

Small CritterStone – 9394-42

Tonal Small CritterRed – 9395-88

Pawprint/HeartStone – 9396-42

Pawprint/HeartGreen – 9396-66

ArgyleTeal – 9397-76

BookStone – 9398P-42

Banner PanelBlue – 9399P-17

Rose8624-22

Lime Green8624-67

New Teal8624-78

Orange8294-35

Brown8294-38

Indigo8294-77

Red8294-88

Page 1Rescued and Loved Quilt 1

Cutting Instructions - Version #1 Please note: All strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.

Materials - Version #11 panel Banner Panel - Blue (A) 9399P-17⅝ yard Houndstooth Basics - Lime Green (B) 8624-67⅝ yard Starry Basics - Indigo (C) 8294-77¼ yard Starry Basics - Orange (D) 8294-35¼ yard Tossed Allover Characters - Teal (E) 9391-76¼ yard Starry Basics - Brown (F) 8294-38¼ yard Houndstooth Basics - New Teal (G) 8624-78¼ yard Pawprint/Heart - Green (H) 9396-66⅔ yard Words - Navy (I) 9393-77*¼ yard Tonal Small Critter - Red (J) 9395-88⅝ yard Small Critter - Stone (K) 9394-42½ yard Starry Basics - Teal (L) 8294-61⅓ yard Houndstooth Basics - Rose (M) 8624-22⅔ yard Tossed Allover Characters - Red (N) 9391-883 ¼ yards Pawprint/Heart - Stone (Backing) 9396-42

*Includes binding

Materials - Version #21 panel Banner Panel - Blue (A) 9399P-17⅝ yard Houndstooth Basics - Lime Green (B) 8624-67⅝ yard Starry Basics - Indigo (C) 8294-77¼ yard Starry Basics - Orange (D) 8294-35¼ yard Tossed Allover Characters - Teal (E) 9391-76¼ yard Starry Basics - Brown (F) 8294-38¼ yard Houndstooth Basics - New Teal (G) 8624-78¼ yard Pawprint/Heart - Green (H) 9396-66⅞ yard Words - Navy (I) 9393-77*¼ yard Tonal Small Critter - Red (J) 9395-88⅝ yard Small Critter - Stone (K) 9394-42½ yard Starry Basics - Teal (L) 8294-61⅓ yard Houndstooth Basics - Rose (M) 8624-22⅔ yard Tossed Allover Characters - Red (N) 9391-882 ½ yards Border Stripe - Red (O) 9392-885 ¼ yards Pawprint/Heart - Stone (Backing) 9396-42

*Includes binding

From the Banner Panel - Blue (A):• Fussy cut (1) 22 ½” x 42 ½ rectangle, centered on the panel.

From the Houndstooth Basics - Lime Green (B), cut:• (2) 2 ½” x 42 ½” WOF strips, piece as needed. • (2) 2 ½” x 26 ½” WOF strips. • (5) Template 2 triangles.

From the Starry Basics - Indigo (C), cut:• (1) 3 ⅞” x WOF strip. Sub-cut (4) 3 ⅞” squares.• (3) 2 ¼” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 2 ¼” x 45” strips.• (2) 2 ¼” x 28 ½” WOF strips.• (1) 2” x WOF strip. Sub-cut (16) 2” squares.

From the Starry Basics - Orange (D), cut:• (5) Template 2 triangles.

From the Tossed Allover Characters - Teal (E), cut:• (4) Template 2 triangles.

From the Starry Basics - Brown (F), cut:• (4) Template 2 triangles.

From the Houndstooth Basics - New Teal (G), cut:• (5) Template 2 triangles.

From the Pawprint/Heart - Green (H), cut:• (5) Template 2 triangles.

From the Words - Navy (I), cut:• (5) Template 2 triangles.• (6) 2 ½” x WOF strips for the binding.

From the Tonal Small Critter - Red (J), cut:• (5) Template 2 triangles.

From the Small Critter - Stone (K), cut:• (4) Template 1 triangles.• (34) Template 2 triangles.• (4) Template 3 triangles.

From the Starry Basics - Teal (L), cut:• (3) 2 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 2 ½” x 48 ½” strips.• (2) 2 ½” x 28 ½” WOF strips.

From the Houndstooth Basics - Rose (M), cut:• (1) 3 ⅞” x WOF strip. Sub-cut (4) 3 ⅞” squares.• (1) 2” x WOF strip. Sub-cut (4) 2” x 6 ½” strips.• (1) 2” x WOF strip. Sub-cut (8) 2” x 3 ½” strips.

From the Tossed Allover Characters - Red (N), cut:• (3) 4” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 4” x 60 ½” strips.• (3) 4” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 4” x 47 ½” strips.

From the Pawprint/Heart - Stone (Backing), cut:• (2) 55” x WOF strips for the backing. Sew the strips together and trim to make the 55” x 75” back.

Page 2Rescued and Loved Quilt 1

Fig. 3

Fig. 4 Fig. 5

Fig. 2

Cutting Instructions - Version #2Please note: All strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.

From the Banner Panel - Blue (A):• Fussy cut (1) 22 ½” x 42 ½ rectangle, centered on the panel.

From the Houndstooth Basics - Lime Green (B), cut:• (2) 2 ½” x 42 ½” WOF strips, piece as needed. • (2) 2 ½” x 26 ½” WOF strips. • (5) Template 2 triangles.

From the Starry Basics - Indigo (C), cut:• (1) 3 ⅞” x WOF strip. Sub-cut (4) 3 ⅞” squares.• (3) 2 ¼” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 2 ¼” x 45” strips.• (2) 2 ¼” x 28 ½” WOF strips.• (1) 2” x WOF strip. Sub-cut (16) 2” squares.

From the Starry Basics - Orange (D), cut:• (5) Template 2 triangles.

From the Tossed Allover Characters - Teal (E), cut:• (4) Template 2 triangles.

From the Starry Basics - Brown (F), cut:• (4) Template 2 triangles.

From the Houndstooth Basics - New Teal (G), cut:• (5) Template 2 triangles.

From the Pawprint/Heart - Green (H), cut:• (5) Template 2 triangles.

From the Words - Navy (I), cut:• (5) Template 2 triangles.• (8) 2 ½” x WOF strips for the binding.

From the Tonal Small Critter - Red (J), cut:• (5) Template 2 triangles.

From the Small Critter - Stone (K), cut:• (4) Template 1 triangles.• (34) Template 2 triangles.• (4) Template 3 triangles.

From the Starry Basics - Teal (L), cut:• (3) 2 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 2 ½” x 48 ½” strips.• (2) 2 ½” x 28 ½” WOF strips.

From the Houndstooth Basics - Rose (M), cut:• (1) 3 ⅞” x WOF strip. Sub-cut (4) 3 ⅞” squares.• (1) 2” x WOF strip. Sub-cut (4) 2” x 6 ½” strips.• (1) 2” x WOF strip. Sub-cut (8) 2” x 3 ½” strips.

From the Tossed Allover Characters - Red (N), cut:• (3) 4” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 4” x 60 ½” strips.• (3) 4” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 4” x 47 ½” strips. From the Border Stripe - Red (O), cut:• (2) 9 ½” x 89” length of fabric (LOF) strips.• (2) 9 ½” x 69” LOF strips.

From the Pawprint/Heart - Stone (Backing), cut:• (2) 93” x WOF strips for the backing. Sew the strips together and trim to make the 73” x 93” back.

Fig. 1

Block Assembly - Both VersionsNote: The arrows in figures represent the fabric print direction. Pay attention to the fabric and unit orientations when assembling the various components.

A

Trim blockto measure

25” x 45”AFTER adding

Fabric B border

B

B

BB

Center Block

Unit 1make 8

MC C

1. Sew (1) 2 ½” x 42 ½” Fabric B strip to each side of (1) 22 ½” x 42 ½” Fabric A panel. Sew (1) 2 ½” x 26 ½” Fabric B strip to the top and to the bottom of the Fabric A panel to make the Center Block (Fig. 1). Trim the block to measure 25” x 45”.

3. Place another 2” Fabric C square on the right side of the 2” x 3 ½” Fabric M strip, right sides together (Fig. 4). Sew across the diagonal of the square from the upper left corner to the lower right corner (Fig. 4). Flip open the triangle formed and press. Trim away the excess fabric from behind the triangle, leaving a ¼” seam allowance to make (1) Unit 1 strip (Fig. 5).

2. Place one 2” Fabric C square on the left side of one 2” x 3 ½” Fabric M strip, right sides together (Fig. 2). Sew across the diagonal of the square from the upper right corner to the lower left corner (Fig. 2). Flip open the triangle formed and press. Trim away the excess fabric from behind the triangle, leaving a ¼” seam allowance (Fig. 3).

4. Repeat Steps 2-3 to make (8) Unit 1 strips total.

Page 3Rescued and Loved Quilt 1

Fig. 8

Fig. 15

Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13

Fig. 14

Fig. 7Fig. 6

Unit 2make 8

MC

Block Onemake 4

M

Unit 1 Unit 1

Unit 2Unit 2

Unit 3

KT-2

KT-2

KT-2

KT-2

KT-2

KT-2

KT-2

KT-2

KT-2

KT-2

KT-2

T-2J

T-2I

T-2H

T-2G

T-2F

T-2E

T-2B

T-2D

T-2J

T-2H

T-2G

T-2I

Unit 3

KT-3

K

Unit 4

T-1

Unit 4

Left SideBorder

L

K

Right SideBorder

L

T-1

T-3

K

K

T-2

KT-2

KT-2

KT-2

KT-2

KT-2

KT-2

KT-2

KT-2

KT-2

KT-2

T-2J

T-2D

T-2B

T-2E

T-2F

T-2G

T-2H

T-2I

T-2J

T-2D

T-2B

T-2E

5. Place (1) 3 ⅞” Fabric C square on top of (1) 3 ⅞” Fabric M square, right sides together. Draw a line across the diagonal of the top square (Fig. 6). Sew ¼” away from each side of the drawn diagonal line (Fig. 6). Cut the two squares apart on the drawn diagonal line (Fig. 7) to make two half-square triangles. Trim the half-square triangles to measure 3 ½” to make (2) Unit 2 squares (Fig. 8). Repeat to make (8) Unit 2 squares.

6. Sew (2) Unit 1 strips together, end to end to make the top row. Sew (2) Unit 2 squares together to make the bottom row. Sew the top and bottom row to each side of (1) 2” x 6 ½” Fabric M strip to make (1) 6 ½” Block One square (Fig. 9). Repeat to make (4) Block One squares total.

7. Sew together (11) Fabric K-Template 2 triangles and (12) assorted Template 2 triangles as shown in Figure 10 to make (1) Unit 3 strip.

8. Sew (1) Fabric K-Template 1 triangle to the bottom of the Unit 3 strip. Sew (1) Fabric K-Template 3 triangle to the top of the Unit 3 strip to make (1) Unit 4 strip (Fig. 11).

9. Sew (1) 2 ½” x 48 ½” Fabric L strip to the left side of the Unit 4 strip to make the Left Side Border (Fig. 12).

10. Repeat Steps 7-9 and refer to Figure 13 for fabric identification and placement to make the Right Side Border.

Top Border

1 1LK K

T-1 T-3

KT-2

KT-2

KT-2

KT-2

KT-2

KT-2

T-2D

T-2B

T-2E

T-2F

T-2G

T-2H

T-2I

Bottom Border

1 1L

K K

T-1 T-3

KT-2

KT-2

KT-2

KT-2

KT-2

KT-2

T-2B

T-2D

T-2J

T-2I

T-2H

T-2G

T-2F

11. Refer to Figure 14 for fabric identification and placement to sew together (13) assorted Template 2 triangles, (1) Fabric K-Template 1 triangle, (1) Fabric K-Template 3 triangle, (1) 2 ½” x 28 ½” Fabric L strip and (2) Block One squares to make the Top Border.

12. Refer to Figure 15 for fabric identification and placement to sew together (13) Assorted Template 2 triangles, (1) Fabric K-Template 1 triangle, (1) Fabric K-Template 3 triangle, (1) 2 ½” x 28 ½” Fabric L strip and (2) Block One squares to make the Bottom Border.

Page 4Rescued and Loved Quilt 1

Quilt Layout - Version #1

Quilt To

p

Folded on

the D

iagonal

Quilt Top Assembly - Version #1(Follow the Quilt Layout while assembling the quilt top.)13. Sew (1) 2 ¼” x 45” Fabric C strip to each side of the Center Block. Sew (1) 2 ¼” x 28 ½” Fabric C strip to the top and to the bottom of the Center Block.

14. Sew the Left Side Border and Right Side Border to the left and to the right of the Center Block. Sew the Top Border and Bottom Border to the top and to the bottom of the Center Block.

15. Sew (1) 4” x 60 ½” Fabric N strip to each side of the Center Block. Sew (1) 4” x 47 ½” Fabric N strip to the top and bottom of the Center Block.

Fig. 16

17. Repeat Step 16 to sew (1) 9 ½” x 69” Fabric O strip to the top and to the bottom of the Center Block, making sure to stop and start ¼” away from each end of the block. To miter each corner, fold the Center Block on a diagonal, wrong side together. This should line up the strips from adjacent sides (Fig. 16).

Finishing - Both Versions19. Layer and quilt as desired.

20. Sew the (6) 2 ½” x WOF Fabric I strips (Version 1) or (8) 2 ½” x WOF I strips (Version 2) together, end to end with 45-degree seams, to make the binding. Fold this long strip in half lengthwise with wrong sides together and press.

21. Bind as desired.

Quilt Top Assembly - Version #2(Follow the Quilt Layout while assembling the quilt top.)16. Center (1) 9 ½” x 89” Fabric O strip on (1) side of the Center Block and pin in place. Start sewing the strip a ¼” from the top edge of the block and stop a ¼” from the bottom edge. DO NOT TRIM THE EXCESS. Repeat with the opposite side.

18. Starting at the sewn seam (represented by the arrow in Figure 16), draw a 45-degree line to the edge of the fabric. Sew on the drawn line. Trim the excess fabric leaving a ¼” seam. Repeat this step with the remaining corners.

Center Block

N

C

C

N

N C C N

Page 5Rescued and Loved Quilt 1

Quilt Layout - Version #2

Center Block

N

C

C

N

N C C N

O

O

O O

Page 6Rescued and Loved Quilt 1

Every effort has been made to ensure that all projects are error free. All the information is presented in good faith, however no warranty can be given nor results guaranteed as we have no control over the execution of instructions. Therefore, we assume no responsibility for the use of this information or damages that may occur as a result. When errors are brought to our attention, we make every effort to correct and post a revision as soon as possible. Please make sure to check www.henryglassfabrics.net for pattern updates prior to starting the project. We also recommend that you test the project prior to cutting for kits. Finally, all free projects are intended to remain free to you and are not for resale.

©2020 Henry Glass & Co., Inc.

NOTE: All templatesshould be cut from a single layer of fabric.

Template 1

Template 2

Template 3

100% Templates

1” square for scale