Reparacion Del Sensor de Parking

8/9/2019 Reparacion Del Sensor de Parking

1/20

Parking sensor

CISBO

CISBO RADER SYSTEM USER’S MANUAL


2/20

Index

TO USER --------------------------------------------------------------1

PART AND TECH DATA---------------------------------------------2

DISPLAY AND ALARM SOUND-----------------------------------3

INSTALLATION FOR 2&4 SENSORS-----------------------------4

INSTALLATION FOR 6&8 SENSORS-----------------------------5

INSTALLATION FOR WIRELESS TYPE--------------------------6

INSTALLATION FOR VIDEO TYPE-------------------------------7

INSTALLATION FOR REARVIEW MIRROR TYPE-------------8

POSITION FOR EACH PART------------------------- --------------9

DISPLAY & MAIN BOX INSTALLATION DIAGRAM----------10

SENSORS INSTALLATION DIAGRAM--------------------------11

NOTICE FOR USER-------------------------------------------------12

FUNCTIONS FOR LED DISPLAY SERIES-----------------------13

FUNCTIONS FOR LCD DISPLAY SERIES-----------------------14

FUNCTIONS FOR REARVIEW MIRROR SERIES---- ----------15

FUNCTIONS FOR VIDEO DISPLAY SERIES--------------------16

GUARANTEE FORM -----------------------------------------------17


3/20

TO USERThank you for choosing and using our Parking Sensor products. We

are going to provide you with the best products and the best services. Inorder to insure the best performance and avoid any false alarm orfunction failure, we strongly suggest that you read this user's manualcarefully before installation and use. Parking Sensor System is a high technology product. It adoptsultrasonic wave sensors to measure the distance between your car and

the obstacles, and remind the driver of safe distance accurately whenreversing a car. We reserve all rights for our Parking Sensor products, including thedesigns and the software. Any unauthorized copy or translation isprohibited. And the content of the user's manual will be updatedaccording to the update of the products, if it is subjected to change,

without notification. At last, the final explanation rights of this user'smanual is reserved by us.



4/20

2

PART

1.

2.

3.

4.Camera: input the video signal, normally be set in the rear bumper. 5.

Display: Back vision display, distance numeric display, buzzer alarm circuit , etc ,normally set inside the driving room.

Control unit : MCU control circuit, normally set inside the trunk, nearby the backup l ights.

Sensor: .Ultrasonic sensor "electronic eye", is the transmisson center for detectingsignals and normally set at the rear or front of bumper.

Mobile phone hands free system: Be set inside the rear view mirror, connected withthe mobile, bring convenience and safety during circumstance.

TECH DATA

1.2.3.

4.5.6. Radio frequency: 315MHz/433MHz7. Camera angle: 92 or 120

Rated voltage : DC12V (24v available) Power : 3.6WWorking temperature: -20 C---70 C

Detecting distance: 0.3-2.0M Detecting angle: H>60 ,V>60



5/203

DISPLAY

LED DISPLAYLED DISPLAY WITH HANDFREE

LCD DISPLAY LCD DISPLAY TFT LCD MONITOR

ALARM SOUND

safe modesafe mode

alarm modealarm modedanger mode

1

2

3

4

5

200-160cm

150-100cm

90-50cm

40-30cm

0-20cm

NO

Bi----Bi----Bi

Bi--Bi--Bi

Bi-Bi-Bi

Bi------------

2.0-1.6

1.5-1.0

0.9-0.5

0.4-0.3

0.0

Stage Distance Awareness Display Alarm


LED DISPLAY


6/20

INSTALLATION FOR 2 & 4 SENSORS

1. This diagram only for 2 and4 back sensors.

2. The system begin to workwhile the car on reversingtime.

3. The display such as LEDdisplay, LCD display, onlyBuzzer, rear view mirror,detail see Page 3.

4. The sensors will be onflashing while the car on

brake t ime if the system beMatched the illuminant sensor..

5.Power line guide: Reversing light: Power on

while the car on reversingtime.

Stop light: power on while brake.

S E N S O R

A

S E N S O R

B

S E

N S O R

C

S E

N S O R

D

4 SENSORS

2 SENSORS

B L A C K

G N D

Reversing

light

R E D

+ 1 2 v

DISPLAY

MAIN BOX

INSTALL ON THE BACK BUMPER

Y E L L O W

1 2 v

Stop

light

(Only for lliuminant sensor)



7/20


8/20

INSTALLATION FOR WIRELESS TYPE

1. This diagram only forwireless parking sensor.

2. The back sensors begin towork while the car onreversing time.

3.the sensors will be onflashing while the car onbrake time if the system bematched the illuminant

Sensor.4. The display such as LED

display, LCD display, onlyBuzzer, rear view mirror,detai l see Page 3.

5.Power line guide:

Reversing light : Power onwhile the car on reversingtime.

Stop light : power on whilebrake.

B L A C K

G N

D

R E D

+ 1 2

v

Y E L L O W 1 2 v

Reversing

lightStop

light

(Only for lliuminant sensor)

4 SENSORS

2 SENSORS

MAIN BOX DISPLAY

S E

N S O R

A

S E

N S O R

B

S E

N S O R

C

S E

N S O R

D


T O C

I G A R E T T E

J A C K

+ 1 2 V

B L A C K

G N

D

R E D

+ 1 2

v

Y E L L O W 1 2 v



9/20

INSTALLATION FOR VIDEO TYPE

1. This diagram only for theparking sensor with camera.

2. When the car on reversing , the back sensors and camera are working.3.The imagine will display on

the external TFT screen,while the distance wi lldisplay as well.

4. The display is used for carDVD/VCD.

5.Power line guide: Reversing light: Power on

while the car on reversingtime.

Stop light: power on whilebrake.

B L A C K

G N D

R E D

+ 1 2 v

Reversing

light

Camera

T O C

A M E R A

T O C

A M E R A

TFT Screen (optional)

D C P L U G

Y E L L

O W

V I D E O

W H I T E

B U Z Z E R

BUZZER

S E N S O R

A

S E N S O R

B

S E N S O R

C

S E N S O R

D

4 SENSORS

2 SENSORS





10/20

INSTALLATION FOR REARVIEW MIRROR TYPE

1. This diagram only for 4 in 1or 6 in 1 parking sensor

2. The back sensors begin towork while the car on

reversing time.3.the sensors will be on

flashing while the car onbrake time if the system bematched the illuminant

sensor.4. The funct ion see detai l

Page 15.5. The display clip on the

original rearview mirror.6.Power line guide:

Reversing light : Power onwhile the car on reversingTime.

Stop light : power on whilebrake.

Y E L L O W

1 2 v

Reversing

light(Only for lliuminant sensor)

INSTALL ON THE

BACK BUMPER

B L A C K

G N D

MAIN BOX

R E D

+ 1 2 v

Stop

light

DISPLAY

4 SENSORS

2 SENSORS

TO CIGARETTE JACK +12V

S E N S O R

A

S E N S O R

D

S E N S O R

C

S E N S O R

B

MOBILE PHONE



11/20

POSITION FOR EACH PART

POSITION GUIDE:1. 4 back sensors: Back

bumper.2. Camera: middle of theback bumper.3.buzzer:back side of backseat.4. Main box: Back chest.5.TFT LCD screen: amountthe sunshade board or standon the front board.6. Hands free rear view mirror:Clip on the or iginal rearviewmirror.7. Display: Stand on the front

board.8.4 front sensor: front bumper.1. 4 back sensors

4. Parking sensorsmain box

3. Buzzer

7. D Isplay

6. Hands free car kit rear view mirror

8. 4 front sensors 5. TFT LCD SCREEN

2. Camera



12/20

DISPLAY INSTALLATION DIAGRAM

Clean the installation position Tear the 3M paster of display Install the display The cord should be invisible

MAIN BOX INSTALLATION DIAGRAM

Locate the ma in box in therear boot at a place safe awayfrom rain,heat or humidity

Lay the wires snugy to avo idugly outlooking



13/20

SENSORS INSTALLATION DIAGRAM

4 sonsorsBumper Driller

Sensor

Bumper

Side vision

Stick on

Insert in



14/20

NOTICE FOR USER

Smooth slope Smooth round object Cotton kind barrier Rainstorm

1.Fol lwing situation will weaken the detectou effect

2.simple service

Trouble Trouble from Resolvent

Parking sensor doesn’t work

Power light on the light stat e,it still doesn’t work

display t he same number again and again

Display the wrong number

1.Power line connected wrong2.Jack connected wrong

Sensor jack connected wrongSensor can’t work

Sensor detect car body or ground

1. Jack connected wrong2.Sensor line may be damaged

1. Connected the red line to +12V2.Check each jack put the right socket

Re-connect sensor jack

Adjust the sensor posi tion and ang le

1.Power off,then refresh all jack2.Check the sensor line, be sure it doesn ’t be closed with vent-pipe or silencer



15/20

FUNCTIONS FOR LED DISPLAY SERIES


1. L ED display :It is for model such as: SB303(F) ,SB305,SB306(F).SB323(F)

2.

3.4.5.

8. If no need the LED display, there are Buzzer only can be replaced

Digital LED showing obstacle distance

Alarm by three step Bi-Bi sound LED display with two side indicate.

Crescent shape digita l display screen6. 2 4 6 8 sensors are available.7. Insert in Stick on illuminate sensors are available.

2. Indicate left

1. Indicate right

3. Distance

1.Indicate left -- When the back le ft sensor detect t he obstacle, it willglitter.2.Indicate right- When the back right sensor detec t the obstacle, it willglitter.3. Distance-Display the latest the distance for all sensors.

13


16/20


FUNCTIONS FOR LCD DISPLAY SERIES

1. L CD display :It i s for model such as: SB308(F) ,SB309(F)2.

3.

Digita l LCD showing obstacle distance

Alarm by three step Bi-Bi sound4. Colour ized LCD screen or blue colour background

5. The simulat ive vehicle is displayed in the colour ized screen

6. 2 4 6 8 sensors are available.

7. Insert in Stick on i lluminate sensors are avai lable.

2.Indicate back-left

1. Indicate back-right

4.Indicate front-left

5.Indicate front-right

3.Simulate car

7.Simulate bar

6.Bracket

9.Distance

10.Background

8.Voice switch

1.Indicate back right- When the back right sensor detect the obstacle, itwill glitter.2.Indicate back left- When the back left sensor detect the obstacle, it willglitter.3.Simulate car-When reversing the car, it will show on the screen .4.Indicate front left- When the front left sensor detect the obstacle, it willglitter.5.Indicate fron t right- When the front right sensor detect t he obstacle, itwill glitter.6.Bracket-You can turn over the screen .7. Simulate bar- When the obstac le is closer, the bar will more and more.

8.Voice switch - Turn on/o ff the voice.9. Distance-Display the latest the distance for all sensors.10. Background- Blue background.

14


17/20

1. Mic2. Volume c ontrol

3.ON/OFF4.Stand by 5.Earphone jack

6.Record7.Play8.Mute

Mic volume adjustor

A echo adjusto r 10.Signal input jack

9.Power input jack 11.Speaker

12.Indicate right

13.Distance

14.Indicate left


FUNCTIONS FOR REARVIEW DISPLAY SERIES

1. L ED display :It is for model such as: SB808(F) ,SB818(F)2.3.

Digital LED showing obstacle distance Alarm by three step Bi-Bi sound

4. Rear view mirror with Guarding against dizzy light and fog function5. Hans free car ki t6. With Record, play, mute funct ion7. 2 4 6 8 sensors are available.8. Insert in Stick on illuminate sensors are available.

1.Mic - Used to receive voice f rom user.2.Volume Control - Used to control the speaker volume leve l.3.ON/OFF-ppower On and Off. When ON/OFF LED lit, the syst em iswork.4Standby - For some mobile phone system, you can press Standby buttonto receive your call(for CDMA system only).5.Earphone Output jack- For private li stening of the call.6.Record Button- Used to record message.7.Play Button- Used to play back all recorded message.8.Mute Bu tton- Used to turn off the microphone of MOBILE MIRROR .9.Power Input Jack - Accept s input plug from car power cord.

10.Hand Free Input Jack - Accept s input plug from hand free cord .11.Speaker- the phone voice wil l be directed through thi s Speaker.12.Indicate right- When the back right sensor detect the obstacle, it willlight.13.Distance- Display the latest the distance for all sensors.14.Indicate lef t- When the back le ft sensor detect t he obstacle, it willlight.

15


18/20

FUNCTIONS FOR VIDEO DISPLAY SERIES

1. TFT LCD display :It is for model: SB838(F) ,SB868(F)2. TFT3.4.

LCD displays the practical image behind your car when reversingTwo series numbers display the distances Alarm by three step Bi-Bi sound

5. The simulative vehicle is displayed in the colourized screen 6. 2 4 sensors are available.7. With camera.8. Insert in Stick on illuminate sensors are available.

7.Right distance

3.Simulate Bar

1.Image

5.Simulate Bar

6.Simulate Bar

4.Simulate Bar

2. Left distance

1.Image- Display the rear image by Camera2.left distance- display the obstacle distance for back left 2 sensors3.simulate Bar -Indica te the back-l eft sensor working state, When theobstac le is clos er, the bar will more and more.4.simulate Bar -Indica te the back-l eft-midd le sensor working state,When the obstacle i s closer , the bar will more and more.5.simulate Bar -Indica te the back-right-middle sensor working state,When the obstacle i s closer , the bar will more and more.6.simulate Bar -Indica te the back-right sensor work ing state, When theobstac le is clos er, the bar will more and more.7.Right distance- display the obstacle distance for back right 2 sensors

CISBO RADER SYSTEM USER’S MANUAL16


19/20

GUARANTEE FORM CISBO

GUARANTEE FORM

Model Number

Date of purchase:

Customer’s name

Telephone

Car registration Number

Stamp/signature of dealer:

Note:

1.Guarantee time:12months.2.The guarantee will be effedtive with the stamp/sugnature of

the dealer.3.Please keep the guarantee form well to ensure 12 months guarantee.

CISBO RADER SYSTEM USER’S MANUAL 17


20/20

Reparacion Del Sensor de Parking

Documents

Transcript of Reparacion Del Sensor de Parking