Remplisseuse automatique de tubes et son distributeur de tubes … files/KALIX KX 100...
Transcript of Remplisseuse automatique de tubes et son distributeur de tubes … files/KALIX KX 100...
Remplisseuse automatique de tubes et son distributeur de tubes
Automatic tube filling machine with its tube feeder
/,4,3n‘...n•n••
Packaging — Processing
Bid on Equipment 1-847-683-7720
www.bid-on-equipment.com
racteristiques techn qu Technical data
Packaging - Processing Bid on Equipment
1-847-683-7720
www.bid-on-equipment.com
Packaging - Processing Bid on Equipment
1-847-683-7720
www.bid-on-equipment.com
2800 mm 4
iminzi
411111111111111111
1400 mm
n
•
E E i0
•
E E O O .co
E E O O
DOSAGE/FILLING (ml) DE TUBE STANDARD (mm)
STANDARD TUBE 0 (mm) LONGUEUR DE TUBE (mm) TUBE LENGHT (mm) ENERGIE CONSOMMEE POWER CONSUMPTION • moteur principal/main motor • vis de poussee/worm type agitator • tete soudeuse IV/sealing head IV • tete soudeuse induction
induction sealing head • tete soudeuse ultrasons
ultrasonic sealing head (par • • • • II - I • • " • S • • • "
EMBALLAGEIPACKING (mm) • 1 re caissel1st case 2150x 1800 x 1600 • 2e caisse/2nd case 1850x 1100x 900 VOLUME APPROXIMATIF TOTAL 10 m 3
APPROXIMATE TOTAL VOLUME POIDS BRUT TOTAL 1 500 kg TOTAL GROSS WEIGHT
1 450 kg POIDS NET TOTAL TOTAL NET WEIGHT
Les donnees techniques sont indicatives et peuvent faire ('objet de modifications sans preavis. Technical data is given for information and MI • Alb ea • • • •IL Alt • . • a• • a•
3a 350 13,5 a 50
60 a 220
1,5 KW 0,2 KW
3 KW 2,5 KW
2 KW impulsions)
es e es de fermeture interchangeables Interchangeable closing heads
Soudeuse 4 Sealing head 4
CONCEPTION • maintien de la fermeture du tube
par pinces d'accompagnement • chauffage par 3 jeux de
mdchoires protegees par un film teflon
• regulation de la temperature pour chaque mdchoire
• soudage, marquage, striage sur un poste
• finition par coupe-tube POSSIBILITES • tubes polyethylene ou
polypropylene
CONCEPTION • tube-holding in closed
position by grip fingers • heating by three pairs of jaws
covered with teflon • heating regulation
for each jaw • sealing, coding, crimping on
one station • tube cutter for the finish POSSIBILITIES • polyethylene or polypropylene
tubes Packaging - Processing Bid on Equipment
1-847-683-7720 www.bid-on-equipment.com
Soudeuse induction Induction sealing head
CONCEPTION • chauffage avec un jeu de
mochoires par induction • regulation independante par
generateur haute frequence • soudage, marquage, striage sur
un poste • finition par coupe-tube POSSIBILITES • tubes (metallo-plastique)
CONCEPTION • induction heating by one
pair of jaws • independent control by high
frequency generator • sealing, coding, crimping on
one station • tube cutter for the finish POSSIBILITIES • an laminate or •ol foil tubes
Poste 2
Packaging — Processing
Bid on Equipment 1-847-683-7720
www.bid-on-equipment.com
e e pour tubes metal Metal tubes head
CONCEPTION • 1 poste de mise en forme du tube
(exprimeuse) • 2 pontes de pliage (1 pH par poste) • 1 poste de marquage et striage POSSIBILITES • 2 plis, pH double, pli cavalier
CONCEPTION • 1 station for flattening prior to folding • 2 folding stations (1 fold per station) • 1 station for coding and crimping POSSIBILITIES • 2 folds, double fold, saddle fold
Soudeuse ultra-sons Ultrasonic sealing head CONCEPTION • fusion de la zone de soudage par contact
d'une machoire vibrante • chauffage, soudage, marquage, striage
sur un seul poste • energie = 20 KHz sous 1 700 W POSSIBILITES • tubes polyethylene, polypropylene, PVC,
laminate, polyfoil
CONCEPTION • fusion of the sealing area by contact with
a vibrating jaw • heating, sealing, coding, crimping on one
station • energy = 20 KHz at 1700 W POSSIBILITIES • polyethylene, polypropylene, PVC,
laminate, polyfoil tubes
max min
Opompe
(mm)
Volume (ml)
pompe sterilisable
piston/ cylinder
(mm)
Descriptif technique Technical description
Packaging - Processing
Bid on Equipment 1-847-683-7720
www.bid-on-equipment.com
OBJECTIF • 80 a 100 tubes metal ou lamines/minute • 60 a 80 tubes plastique/minute
CONCEPTION • remarquable accessibilite tant pour le
service que pour la maintenance • changements de formats fres rapides • fetes de fermeture (pliage ou soudage) de
qualite et rapidement interchangeables • mecanique homogene, robuste et
particulierement silencieuse • machine carterisee et finition INOX, sans
peinture en standard • machine reposant sur roulettes et verins de
blocage
DESCRIPTIF • machine intermittente di plateau 0620 mm
(entraxe de deux trous diametralement opposes), commande par indexeur de precision type FERGUSON
• automate programmable OMRON en standard
• introduction automatique des tubes vides • orientation du tube par dispositif fiable et
précis • pas de tube = pas de remplissage • dispositif de dosage volumetrique par
pompe et robinet a boisseau tournant tres rapidement demontable, nettoyable et simple a steriliser
• dosage de precision superieure a 1 °/0, facilement reglable
OBJECTIVE • 80 to 100 metal or laminated tubes/minute • 60 to 80 plastic tubeslminute
CONCEPTION • full access for service and maintenance • very easy changeovers • high quality, quickly interchangeable
closing heads • strong mechanical design with low
operating noise • standard machine with safety guards and
stainless steel finish • machine equipped with casters and height
adjustable feet
DESCRIPTION • intermittent machine with turntable 620
mm 0 , (center distance between two opposite holes), indexed by precision type FERGUSON device
• OMRON type programming controller in standard execution
• automatic introduction of empty tubes • reliable and precise orientation of the tubes • no tube = no fill • volumetric dosing system by piston/cylinder
and rotary valve which are easy to dismantle, clean and sterilize
• filling accuracy better than 1 %, easily adjustable
Volume (ml)
min max sterilizable pump
10 2 8 5 10 2 8 5 14 4 15 10 14 4 15 10 22 8 35 25 22 8 35 25 38 20 110 80 38 20 110 80 52 40 210 150 52 40 210 150 70 80 380 270 70 80 380 270
• •
•
•
• pompes facilement interchangeables • injecteur plongeant de 25 mm dans le tube
avant remplissage • reaspirant en fin de remplissage pour le
coupage du produit • pieces au contact du produit inalterables
en acier INOX 316 L • reservoir d'alimentation de 70 litres • ejection des tubes remplis et fermes
piston/cylinder easily interchangeable nozzle diving 25 mm into the tube before filling suckback at the end of filling to give a perfect product cut-off parts contacting the product are corrosionproof in stainless steel 316 L hopper volume 70 liters (18.5 gallons) ejection of the filled and closed tubes
• Chargeur surbaisse pour la distribution automatique des tubes metal et plastique !l yres en cartons perdus non alveoles (photo en couverture)
• Chargeur a hauteur pour la distribution automatique des tubes metal livres en cartons perdus non alveoles (photo n° 1)
• Reservoir a pression de 6 L (acier INOX 316 L) avec piston et contacts mini et maxi (photo n° 2)
• Equipement de sterilisation en ligne • Bec a ciapet pour produits filants • Vis de poussee ou agitateur (acier INOX
316 L) pour aider le produit a descendre ou uniformiser sa temperature
• Reservoir bain-marie (acier INOX 316 L) de 70 L avec regulation ±5°C ou ± 1°C
• Remplissage a partir du fond du tube pour des produits fres epais ou fres fragiles (photo n° 3)
• Generateur anti-statique pour tubes plastique
• Depoussiereur de tubes • Soufflage d'azote avant ou apres le
remplissage • Retournement des tubes a rejection • Revisseur de bouchons de controle
couple reglable, pour bouchons coniques • Ensemble de remplissage pour produits
liquides • Lecteur de code
• Automatic lowered feeder for distribution of metal, plastic or laminated tubes delivered in boxes without divisions (see photo on first page)
• Automatic feeder for metal tubes delivered in boxes without divisions (photo n° 1)
• Pressurized hopper (6 I, stainless steel 316 L) with piston and min./max. contacts (photo n° 2)
• Equipment for sterilization in place • Positive shut off/blow injector for stringy
products • Agitator (stainless steel 316 L) to assist the
product feeding or keep the product temperature uniform in case of hot filling
• Jacketed hopper (70 I, stainless steel 316 L) with precision ±5°C ou ± 1°C
• Bottom filling for very viscous or unstable products (photo n° 3)
• Anti-static generator for plastic tubes • Cleaning device for tubes • Nitrogen blowing before or after filling • Inversion of the tube position at ejection • Cap tightening with adjustable torque
for conical caps • Filling assembly for liquid products • Code reader
1
2
3
Options
Pachaginv Processing
Bid on Equipment 1-847-683-7720
www.bid-on-equipment.com