Remotely programmable and controllable alarm system

2

Standard equipment

Expansions

Control modes

Automation

Ports

Software options/Compatibility with monitoring software

TP10-42• Management of max. 42 hard-wired zones• Management of max. 42 wireless zones (used

alternatively to the hard-wired zones)• 1 tamper input• 4 zone inputs for conventional detectors• 1 Sensor Bus port for 6 RSC® peripheral devices• 1 RS485 port for conventional peripheral devices• 1 Siren Bus port for 4 RSC® sirens• 1 alarm output for indoor siren• 1 alarm output for outdoor siren• 6 programmable logic outputs• On-board PSTN interface: 8 channels with 2 telephone

numbers each• Event notifi cation in the formats: speech, SMS, Ring,

DTMF, FSK and data• Communication vectors: PSTN (on-board), GSM-GPRS,

GSM and TCP/IP (optional)• GSM network cell scanner function• Jammer detector function• Voice synthesis• Management of multiuser systems with common zones• Management of the telematic services DDNS

Tecnoalarm, SNTP and Mail Server Tecnoalarm• 8 programs• 8 remote controls

• 8 timers• 6 access periods• 8 cyclic timers• Quadrennial or perpetual calendar• Management of biometric fi nger print and RFID card

readers• 122 access codes• 100 fi nger prints• 100 transponders/RFID cards• 80 wireless keys• Digital control of the radio range and interferences• Programmable coincidence function• Event buffer with a capacity of 7600 events• 14.4V power supply output for battery recharge• Battery test with automatic disconnection in case of

failure• 3A linear power supply

CPU ESP4-20SPEED8 STD

SPEED4

SPEED4-14OC

SPEED8

SPEEDALM8 PL

SPEED4 PLUS

SPEED8 PLUS

SPEEDALM8 PLUS

TP4-20ATE2 ATE2 ATE2

C C D

TP4-20 GSMATE2 ATE2 ATE2

C C D


A B C


A B C

TP10-42ATE2 ATE4 ATE4 ATE2

A A A


A A A


A A A


A A A


A A A


C C D


C C D


A B C


A B C

ATEATE22 ATEATE44 ATEATE44 ATEATE22

AAA BBB CCC

TP10-42ATEATEATE222 ATEATEATE444 ATEATEATE444 ATEATEATE222

AAAA AAAA AAAA

CC

UTS V4 4 - 1/4

UTS V8 8 - 1/4

UTS E 24 8 1/4

3

Inputs

CONVENTIONAL* 44

84 4 8 8 4 - -

ZONE BUS - -

SENSOR BUS 6 - - - - - - 4 8 8

* The following contact types can be programmed: NC (normally closed), NO (normally open), BIL (end-of-line resistor), B24 (double end-of-line resistor). The following fi lters can be programmed: time, pulse count or inertia.

L 398mm

H 309mm

H 90mm

D 108mm

A: excellent - B: good - C: satisfactory - D: not implemented

Technical evaluation

index

Serial ports Communication vectors Videoalarm/Telematic Services

Cameras CamerasRecording RecordingViewing Viewing

4

1

TECNOCELL-PRO PL

8

APR FINGER-CARDTP SKN PROX K6N DIGITEX APR CARD APR FINGER

8

LCDPROX1 LCD300/S

UTS V8 UTS V4 UTS C

+SRA- SIR

- OUT1- OUT2+ OUT3+ OUT4

--++

ESP LAN

ESP GSM-GPRS

6

SIREN BUS

SENSOR BUS

SERIAL BUS

SRASRINTOUT2OUT1

SIREN BUS

SPEED ALM8 PLUS

OUT2OUT1

SPEED 8 PLUS

OUT1

SPEED 4 PLUS

+ SRA+ SR

- OUT1- OUT2

SIREN BUS

TAPS-8 BUS

SAEL 2010 BUS SIRTEC BUS

ETHERNET PORT

UTS 4.3 PROX

ESP 4-20

PROG INTERFACE

4

The label indicates the number of connectable devices per type.

POWER SUPPLIES

CONSOLES

BUS SIRENS

AUXILIARY CONTROL UNITSTELEPHONE

COMMUNICATORS

3 243

IP CAMERAUTS E

10

SRASRINTOUT2OUT1

SPEED ALM8 PL

OUT2OUT1

SPEED 8

OUT1

SPEED 4

OUT1 - 14

SPEED 4-14OC

1

SPEED 8 STD

16

ESP 8RP ESP 8RSP ESP 4RS ESP32-OCN SINOTTICO 32N

1 2 3 4 5 6 7 8

2

RX300/433868 RTX200/433868

2+242

142

RTX500 BWL RTX500S BWL

1082

N

Tecn

oala

rm S

erve

r

PROG USB PROG32

5

OUTPUT EXPANSIONS

WIRELESS ASYNC@WLUse alternatively to RTX500 BWL - RTX500S BWL

WIRELESS SYNC@BWLUse alternatively to RX300/433868 - RTX200/433868

TELEMATIC SERVICES

System confi guration

A B C

A B C

A B C

AB C

6

Internal expansions and interfaces

ESP4-20

ESP GSM-GPRS

ESP LAN

Expansion module with 4 parallel inputs for the connection of conventional detectors and Zone Bus detectors (only the fi rst two inputs)

Interface for the connection of the control panel with the GSM or GSM-GPRS networkThe interface allows to use the GSM or GSM-GPRS network as communication vector.

Ethernet-InterfaceThe interface implements the IP vector and permits remote management with TCP/IP.

Item no. F127TP420ESP

Item no. F127ESPGSMGPRS

Item no. F127ESPLAN

Mounting position

Mounting position

Mounting position

MOUNTING POSITIONS

Approved for use

with certifi ed

control panels

Approved for use

with certifi ed

control panels

Approved for use

with certifi ed

control panels

7

GSM ANTENNA EXTENSION

4m extension cord for the connection of the antenna to the GSM-GPRS module

Item no. C126PROLANTENNA

TP10-42 - Accessories

OPTIONS

Option Item no.

ADVANCEDPROGRAMMING F127T42/AV Advanced programming software module

VECTORS

Vector Device Class DDNS MAIL APP RDV® SMSRemotecontrols

Remotemanagement

Monitoring

PSTN ON-BOARD ATE2 ✓ ✓ ✓ ✓

GSM-GPRS* ESP GSM-GPRS ATE2/4 ✓ ✓ ✓ ✓ ✓

GSM-EXT* TECNOCELL PRO PL ATE2 ✓ ✓ ✓

IP* ESP LAN ATE2/4 ✓ ✓ ✓ ✓ ✓

* The vectors GSM-GPRS, GSM-EXT and IP are optional and require the installation of internal and external interfaces.Class - The class defi nes the performance criteria of the alarm transmission equipment (ATE) for alarm notifi cation. In compliance with the valid standards, the criteria of performance are divided into six classes from ATE1 to ATE6. The vectors are classifi ed as ATE2 or ATE4 according to the communication protocols used. The class ATE4 requires the use of encrypted protocols. The IP vector has been certifi ed class ATE4 on the basis of internal tests executed by Tecnoalarm.

MODELS

Model Item no.

TP10-42 F101T42-IT ✓ Optional Optional Optional 3A ✓

SMS

c/Vapor 18 (Pol. Ind. El Regas)08850 Gavá - Barcelona (España)tel. [email protected]

495, Rue Antoine Pinay - 69740 Genas Lyon (France)tél. +33478406525 - fax +33478406746tecnoalarm.france@tecnoalarm.comwww.tecnoalarm.comAgence de Paris: 125, Rue Louis Roche 92230 Gennevilliers

Via Ciriè, 38 - 10099 - San Mauro T.se Torino (Italy)tel. +390112235410 - fax [email protected] - www.tecnoalarm.com

Systems TP10-42 - Technical and functional specifi cations

Zones

Total logic zones 42

CPU hard-wired zones4 conventional

6 Sensor Bus

Total hard-wired zones 42

Total wireless zones 42

OutputsCPU outputs 6 programmable

Sirens 8

Systemfeatures

RS485 serial bus 3

Voice synthesis ✓

Event buffer capacity 7,600 events

Programs andaccess

management

Programs 8

Codes 122

Finger prints 100

Transponders/RFID 100

Wireless keys 80

Automation

Timers 8

Access periods 6

CalendarQuadrennial or

perpetual

Remote controls 8

Cyclic timers 8

TCS (test call with TCP/IP) ✓

Telephonesection

Channels 8

PSTN vector On-board

GSM-GPRS vector (optional) ESP GSM-GPRS

GSM vector (optional) TECNOCELL-PRO PL

IP vector (optional) ESP LAN

Transmittable events 157

Telephone numbers/IP addresses

2 per channel (max. 24 digits)

Call event queue 32

Communication protocols 216

Telematicservices

DDNS Tecnoalarm ✓

Mail Server Tecnoalarm ✓

SNTP ✓

VideoalarmCCTV ✓

IP ✓

Serialexpansions

Hard-wired input expansions 10

Wireless expansions 2

Consoles 8

Auxiliary control units 8

Output expansions 16

GSM telephone communicator 1

Bus sirens 4

Wireless sirens 2

Wireless consoles 2 (ASYNC@WL)

Advancedprogramming

Actions 1,024

Timers 512

Counters 128

Telephone index 48 numbers

Reserved output expansions 4

Accessorymanagement

App (iPhone + Android) ✓

Printer management ✓

Electricalspecifi cations

Operating voltage 230V AC +/-10% 50Hz

CPU board consumption 150mA @ 13.8V DC

Power supply 3A @ 14.4V DC

Battery 1x 12V/12Ah

Physicalspecifi cations

Environmental class II

Casing Metal

Dimensions (L x H x D) (w/o antenna)

398 x 309 x 108mm

Antenna height 90mm

Weight (w/o battery) 4.2kg

Operating temperature -10°C…+55°C

Humidity (w/o condensation) 93%

Conformity Directive R&TTE 1999/05/EC

Remotely programmable and controllable alarm system · Tecnoalarm, SNTP and Mail Server Tecnoalarm...

Documents

Transcript of Remotely programmable and controllable alarm system · Tecnoalarm, SNTP and Mail Server Tecnoalarm...