REGIONSHOSPITALET VIBORG PRICELIST - Unicon · STANDARD CONCRETES - ACC. DS 2426 3 ... LOW-ALKALI...

PRICELISTREADY MIXED CONCRETE

JANUARY 2018

REGIONSHOSPITALET VIBORG

PRICELIST CONTENTS ENVIRONMENT CLASS 2

CONTACTS 2

PAYMENT 2

STANDARD CONCRETES - ACC. DS 2426 3

FUNCTIONAL CONCRETES - ACC. DS 2426 3

FUNCTIONAL CONCRETES - ACC. TO UNICON DECLERATION 4

SUPPLEMENTARY SERVICES AND EXTRA CHARGES - RMC 4

KEY ACCOUNT MANAGERS - DENMARK 6

TERMS AND CONDITIONS - RMC 7

ENVIRONMENT CLASS Includes the followingexposure classesin accordance with DS/EN 206

XC1

PASSIVE

XC3 XS1 XD3

MODERATE AGGRESSIVE EXTRA AGGRESSIVE

X0 XC2 XD1 XD2

XF1 XF2 XF4

XC4 XS2 XS3

XA2

XA1 XF3 XA3

FOR ONLINE AND ALWAYS UPDATED VERSION OG THE PRICELIST GO TO WWW.UNICON.DK

PAYMENT UNICON A/S - CVR 16 06 49 39

Konto-nr.: Danske Bank 3100 0005401828Please contact our administration for further information. Tel: +45 70 10 05 90 E-mail: [email protected]

CONTACTS ORDERING OF READY MIXED CONCRETE AND PUMPS

Delivery area Nord +45 70 10 05 60 [email protected] area Syd +45 70 10 05 70 [email protected] area Øst +45 70 13 03 60 [email protected] concrete plant by postal code +45 70 13 03 01(applies to all of Denmark)

CUSTOMER SERVICE (Handles inquiries that do not concern ordering of concrete)

Customer Service Nord +45 70 10 05 61 [email protected] Service Syd +45 70 10 05 71 [email protected] Service Øst +45 70 10 05 81 [email protected]

2

STANDARD CONCRETES ACC. DS 2426 COMPRESSIVE STRENGTH CLASS CYLINDER / CUBE COMPRESSIVE STRENGTH

C8/10 C12/15 C16/20 C20/25 C25/30 C30/37 C35/45 C30/37 C35/45 C40/50 C45/55

ENVIRONMENT CLASS DS/EN 1992-1-1 DK NA

Passive Passive Passive Passive Passive Passive Passive Moderate Aggressive Extra Aggressive

Extra Aggressive

SLUMP CONCRETE DMAX 32 MM, SLUMP 40-120 MM

988,- 1.017,- 1.046,- 1.074,- 1.103,- 1.134,- 1.164,- 1.276,- 1.465,- 1.545,- 1.625,-

LAVA BETON®

DMAX 16 MM, SLUMPFLOW 550 MM1.194,- 1.223,- 1.254,- 1.284,- 1.358,- 1.563,- 1.647,-

FLOOR CONCRETE G1 (COARSE AGGREGATE CLASS M)

DMAX 32 MM, SLUMP 80-120 MM1.236,-

FLOOR CONCRETE G1 (COARSE AGGREGATE CLASS A)

DMAX 32 MM, SLUMP 80-120 MM1.296,-

FLOOR CONCRETE G2 (COARSE AGGREGATE CLASS M)

DMAKS 32 MM, SLUMP 80-120 MM1.285,-

FLOOR CONCRETE G2 (COARSE AGGREGATE CLASS E)

DMAX 32 MM, SLUMP 80-120 MM1.345,-

FLOOR CONCRETE G3 (COARSE AGGREGATE CLASS E)

DMAX 32 MM, SLUMP 80-120 MM1.400,-

FUNCTIONAL CONCRETES ACC. DS 2426 DKK/m³ excl. VAT

CONSTRUCTION CONCRETE (COARSE AGGREGATE CLASS E)

DMAX 32 MM, SLUMP 40-120 MM LOW-ALKALI SULFATE RESISTING CEMENT

1.583,- 1.662,-

CONCRETE FOR CONSTRUCTION JOINTS DMAX 8 MM, SLUMP 200-240 MM

1.297,- 1.329,- 1.362,- 1.422,- 1.627,- 1.711,-

UNI-DRY® W/C < 0,40 DMAX 16 MM, SLUMP 60-120 MM

1.552,-

UNI-DRY® LAVA W/C < 0,40 DMAX 16 MM, SLUMPFLOW 550 MM

1.626,-

UNI-DRY® EXTRA W/C < 0,35 DMAX 16 MM, SLUMP 60-120 MM

1.627,-

UNI-DRY® EXTRA LAVA W/C < 0,35 DMAX 16 MM, SLUMPFLOW 550 MM

1.706,-

UNI-READY® LAVA DMAX 16 MM, COARSE AGGREGATE MIN. CLASS M, STEEL FIBRES

1.379,- 1.407,- 1.543,-

UNI-READY® G1 M32 DMAX 32 MM, SLUMP 60-120 MM, STEEL FIBRES

1.421,-

UNI-READY® G1 M16 DMAX 16 MM, SLUMP 60-120 MM, STEEL FIBRES

1.477,-

UNI-LIGHT CLASSIC® PLEASE CONTACT NEAREST CONCRETE PLANT FOR PRICE DMAX 16 MM, SLUMP 60-120 MM, WHITE CEMENT

COMPRESSIVE STRENGTH CLASS CYLINDER / CUBE COMPRESSIVE STRENGTH

C8/10 C12/15 C16/20 C20/25 C25/30 C30/37 C35/45 C30/37 C35/45 C40/50 C45/55

ENVIRONMENT CLASS DS/EN 1992-1-1 DK.NA

Passive Passive Passive Passive Passive Passive Passive Moderate Aggressive Extra Aggressive

Extra Aggressive

UNI-FUNDATM PRICES ON UNI-FUNDATM CONCRETE DEPEND ON CONCRETE STRENGTH AND FIBRE AMOUNT. PASSIVE ENVIRONMENT CLASS, SLUMP 60-120 MM DIMENSION CHART AVAILABLE IN PRODUKTMAGASINET, KVIKGUIDEN OR ON WWW.UNICON.DK

3

DKK/m³ excl. VAT

FUNCTIONAL CONCRETES ACC. UNICON STRENGTH CLASS CYLINDER COMPRESSIVE STRENGTH

8 12 16 20 25 30 35 40

CEMENT MORTAR DMAX 4 MM, CLASS P MATERIALS, SLUMP 40-200 MM

1.141,- 1.174,- 1.206,- 1.239,- 1.272,- 1.305,-

TOPPING CONCRETE DMAX 8 MM, COARSE AGGREGATE MIN. CLASS M, SLUMP 40-200 MM

1.186,- 1.219,- 1.252,- 1.284,-

KERB CONCRETE DMAX 32 MM

979,- 1010,- 1.040,- 1.071,- 1.102,- 1.133,-

FUNCTIONAL CONCRETES ACC. UNICON DKK/m³ excl. VAT UNI-FILLTM RØRPASTA (PIPE PASTE) MINERAL BINDERS AND WATER. HIGH FLUENT CONSISTENCY.

UNI-FILLTM RØRFYLD (PIPE FILLING) DMAX 8 MM, CLASS P MATERIALS, SLUMP 180-250 MM

1.178,-

963,-

SUPPLEMENTARY SERVICES AND EXTRA CHARGES

ENVIRONMENTAL TAX 33,-DKK/m³

SLUMP 130-160 MM 33,-DKK/m³



COARSE AGGREGATE DMAX 16 MM 56,-DKK/m³

COARSE AGGREGATE DMAX 08 MM 74,-DKK/m³

COARSE AGGREGATE CLASS M 82,-DKK/m³

COARSE AGGREGATE CLASS A 141,-DKK/m³

COARSE AGGREGATE CLASS E 151,-DKK/m³

CONCRETE WITHOUT ADDITION II 35,-DKK/m³

SET ACCELERATING AGENT 79,-DKK/m³

SET RETARDING AGENT 59,-DKK/m³

WINTER SURCHARGE AS OF NOVEMBER 16TH TO MARTS 15TH. 25,-DKK/m³

HEATED CONCRETE AS OF NOVEMBER 16TH TO MARTS 15TH. WINTER SURCHARGE IS INCLUDED 66,-DKK/m³

PICK UP UNDER 0,5 M³ 76,-DKK/hl

CONCRETE ADDED STEEL- OR PLASTIC FIBRES, PLEASE CALL FOR FURTHER INFORMATION AND PRICE.

EXTENDED CONTROL CLASS 16,-DKK/m³

4

DKK excl. VAT

DKK/m³ excl. VAT

MOBILE LABORATORY – MIN. 2 HOURS 745,-DKK/hour

TEMPERATURE SIMULATION - ACC. OWN SPECIFICATION 2.650,-DKK

DRYING-OUT SIMULATION - ACC. OWN SPECIFICATION 2.020,-DKK

TECHNICAL ASSISTANCE / SITE INSPECTION 900,-DKK/hour

ENGINEERING ASSISTANCE 1.200,-DKK/hour

UNLOADING WITH CONVEYOR BELT FOR LOADS MORE THAN 5 M³ 99,-DKK/m³

HOWEVER MINIMUM PER ORDER 495,-DKK

LOADS BELOW 7 M³ 120,-DKK/m³

HANDLING OF EXCESS CONCRETE/RETURNED CONCRETE INCLUDING WASTE DISPOSAL CHARGE 364,-DKK/m³

OPTION OF 4-AXLE TRUCK 20,-DKK/m³

SCHEDULED EXTENDED UNLOADING (BILLING STARTS PER. COMMENCED 15 MIN.) 150,-DKK/15 minute

FOR UNLOADING UP TO 7 M3, FREE UNLOADING TIME IS 30 MIN. THEREAFTER, FREE UNLOADING TIME INCREASES BY 3 MINUTES. PER. M3 ABOVE 7 M3

CHARGE FOR LATE CANCELLATION. ACTUAL COSTS. HOWEVER, MINIMUM 52,-DKK/m³

OPENING OF PLANT 5.500,-DKK

PRICE PER EMPLOYEE OUTSIDE NORMAL OPENING HOURS 15.00-20.00 375,-DKK/hour

PRICE PER EMPLOYEE OUTSIDE NORMAL OPENING HOURS 20.00-07.00 AND DURING THE WEEKEND 750,-DKK/hour

NORMAL OPENING HOURS FOR DELIVERY: MONDAY-THURSDAY KL. 07.00-15.00, FRIDAY KL. 07.00-14.00.

NONE SCHEDULED EXTENDED UNLOADING (BILLING STARTS PER. COMMENCED 15 MIN.) 300,-DKK/15 minute

SUPPLEMENTARY SERVICES AND EXTRA CHARGES

5

DKK excl. VAT

6

KEY ACCOUNT MANAGERS - UNICON DENMARK

John Skaanning Key Account Manager - Nordjylland

+45 26 88 49 53 [email protected]

Allan Dahl Senior Key Account Manager - Danmark

+45 26 89 13 [email protected]

René Fournaise Key Account Manager - Fyn


Flemming Grand Key Account Manager - Midt- og Vestjylland


Louise Elm Niemann Key Account Manager - Østjylland +45 26 88 49 33 [email protected]

René Groth Eriksen Key Account Manager - Syd- og Vestsjælland


Ken Bjørngaard Key Account Manager - Vest- og Sønderjylland


Jesper Matzen Key Account Manager - Trekantsområdet +45 21 41 91 01 [email protected]

Thomas Hemmingsen Key Account Manager - Nordsjælland


Per HoldeKey Account Manager - København


PRICES/VOLUMES The prices are stated per m³ exclusive of VAT and environmental/ regulatory taxes valid on the day of delivery, free delivered at a delivery address within the normal market area of the plants.The prices are based on delivery of full loads within the opening hours and delivery times specified in the pricelist. A surcharge will be calculated for de-livery outside the specified hours as well as for delivery of volumes smaller than the quantities specified in the pricelist.The concrete volume stated in the delivery note represents the volume of the concrete with the targeted air content. Waiting and unloading time that exceed the maximum waiting and unloading time stated in the pricelist, will be calculated according to the valid pricelist. Unicon A/S will invoice all deliveries in accordance with the pricelist valid on the day of delivery.

PAYMENTUp to date of invoice plus 8 days net (private customers).Up to current month + 15 days net.Interest will be added to past due accounts.

DELIVERYThe order will be delivered and unloaded at the site of use or as close to the site as allowed by accessibility and driving conditions. Should the buyer give directions to drive on uneven ground, all potential, consequential damages will be at the buyer’s expense.Time of delivery is understood as the time of arrival of delivery at the delivery address or collection at the factory.We will strive to deliver 15 min before to 30 min after agreed delivery time.

CHANGESShould the buyer wish to change the date of delivery for an order/part order in full discharge, the buyer must give such notice before 12.00h on the day before the agreed time of delivery. For orders to be delivered by concrete pump, notice must be given before 12.00h on the day before the agreed delivery.Should the buyer wish to change ordered agreements, this is to be executed in writing.

INSPECTION UPON RECEIPTPrior to unloading, the buyer shall check the specifications of the delivery note, and during unloading the buyer is to maintain visual control to make sure that the delivery is in accordance with the order. The buyer or his representative must sign the delivery note to confirm receipt of delivery and furthermore to confirm that the specifications of the delivery note are in ac-cordance with the required specifications of the supply ordered by the buyer.

CONCRETE CONTROLUnicon A/S’ plants are certified by Dancert, which ensures that the supplies are in conformity with present standards and regulations.Unicon A/S’ quality control system is pursuant to DS/EN ISO 9001 and en-sures that concrete quality and quality control are documented in conformity with present standards and regulations.Individual results as well as the statistics of the results of the internal quality control are available to buyer subject to written agreement.If no other written agreement has been made, Unicon A/S’ internal quality control shall serve as documentation.Unicon A/S guarantees that the delivered concrete on the date of delivery is - as a minimum - in accordance with the specifications of the delivery note.

USE OF PRODUCT AND FINISHINGUnicon A/S is without liability, if the buyer has ordered a concrete supply which is not suitable for the purpose or the casting conditions.Unicon A/S is not liable for quality reduction, caused by premature desicca-tion, inadequate compression, covering or finishing. Unicon A/S is not liable for colour differences or other circumstances caused by change of specifica-tions, including changes of the specifications made by Unicon A/S’ material suppliers, in standing orders.Any addition to the concrete on the buyer’s behalf is at buyer’s own risk.

LIABILITY FOR DEFECTS/WARRANTY LIABILITYThe supply is delivered with a 5-year supplier liability for defects in conformity with the regulations of AB92, section 10 paragraph 4.If the buyer is also the builder and carries out the work himself, the 5-year term is calculated from the date of delivery.If a builder can prove that a claim for defects can only be put through to the buyer with large difficulties, the claim can be made directly on Unicon A/S.

PRODUCT LIABILITYUnicon A/S is liable for damages, if it can be proved that the said damage is caused by a defective supply.Unicon A/S has taken out product liability insurance.Should Unicon A/S be subject to product liability against any third party, the buyer is obligated to indemnify Unicon A/S from that part of the claim for compensation, which exceeds DKK 15 million. In case of a trial, the buyer shall let himself be sued at the same court of law that is hearing the claim against Unicon A/S.

LIMITATION OF LIABILITYIn case of liability for damages for defective supplies – including product liability - Unicon A/S is not liable for any business interruption, loss of time, loss of profits or any other indirect loss or damage. In case of liability for delay, the liability of Unicon A/S shall not exceed the price of the delayed supply. The liability, however, shall not include business interruption, loss of profits or any other indirect loss or damage. In case of a potential breakdown of production, machine damage or other damage to concrete pumps, Unicon A/S shall not assume any liability and no compensation is paid.

CLAIMSThe buyer’s written claim stating the nature and scope of the claim shall be handed over to Unicon A/S immediately after that the buyer knew or ought to have known the circumstances causing the claim. If such notice is not given, any future claim will be forfeited.

FREEDOM OF LIABILITY (FORCE MAJEURE)Unicon A/S is not liable for delays caused by circumstances mentioned in AB 92 section 24.

CONSULTINGUnicon A/S will provide consulting to the buyer to the best of its ability with regard to choice of products, their functions and suitability to specific purposes. It is expressly agreed that such technical consulting or assistance, which is provided without separate charge, does not make Unicon A/S liable or impose obligations with regard to such consulting and assistance, or for results achieved. Liability in addition to this is only accepted by Unicon A/S if Unicon A/S has provided separate written consulting to the buyer in the form of the preparation of actual calculations or in the form of separate written statements regarding the usability of what is sold for a specially indicated purpose to a buyer, which may not be expected to have sufficient professional knowledge in the area to independently evaluate the question of the product’s suitability. Unicon A/S’ liability is limited to no more than DKK 100,000 in case of incorrect consulting and does not cover operations loss, loss of time, loss of profit or other indirect loss. Unicon A/S is not liable for statements that are based on estimated assessments or an evaluation.

DISPUTESDisputes, if any, between the parties shall be settled by arbitration at the Danish Court of Arbitration for the Building and Construction Industry.

Edited November 2017

SALES AND DELIVERY TERMS

11.1

1.2

1.3

1.4

1.5

2

33.1

3.2

3.3

44.1

4.2

5

66.1

6.2

6.3

6.4

6.5

77.1

7.2

7.3

88.1

8.2

8.3

99.1

9.29.3

10

11

12

13

14

7

ORDERING CONCRETE AND CONCRETE PUMPINGCALL THE PLANT DIRECTLY VIA ZIP CODE. “QUICK-CALL” +45 70 13 03 01

Call +45 70 13 03 60

Call +45 70 10 05 60

Call +45 70 10 05 70

HjørringFrederikshavn

Nørresundby

Ribe

RandersGrenå

Skive

Viborg

Århus

Holstebro

Herning

Aalborg

Århus

Horsens

Vejle

Fredericia

VejenEsbjerg

Varde

Tønder

Vojens

Sønderborg

Glamsbjerg

Odense

Svendborg

Skjern

HøjbySlagelse

Næstved

Herfølge

Prøvestenen

Ejby

Frederikssund

Hillerød

Holbæk

AvedøreHolme

Press 1: Zip codePress 2 4:- PlantPress 6: PumpsPress 7: Other



Unicon A/S • Islands Brygge 43 • 2300 Copenhagen S.

Tlf.: + 45 70 10 05 90 • E-mail: [email protected]

www.unicon.dk

REGIONSHOSPITALET VIBORG PRICELIST - Unicon · STANDARD CONCRETES - ACC. DS 2426 3 ... LOW-ALKALI...

Documents

Transcript of REGIONSHOSPITALET VIBORG PRICELIST - Unicon · STANDARD CONCRETES - ACC. DS 2426 3 ... LOW-ALKALI...