199

REFERERENCES[1] Aggarwal,D.K., Gupta,R.S, and Vasandani,V.P. "Optimum Design

of Jet Pump", Journal of Institution of Engineers (India),

Mechanical Engineering Division, vol.66, Pt ME 6, 1986, pp. 139-

144.

[2] Allen,T. “Particle Size Measurement”, Powder Technology Series,

Chapman Hall Pubs, New York, 3rd edition, 1981 pp.103-183.

[3] Aris, R. "On shape factors for irregular particles - I. The steady

state problem. Diffusion and reaction", Chemical Engineering

Science, Vol.6, 1957, pp.262-268.

[4] Bain,A.G. and Bonnington,S.T. “The Hydraulic Transport of Solids

by Pipeline”, Pergamon Press, 1970, pp 88-91.

[5] Berleur,E and Giot, Michel. "Application of Air-Lift Principle to

solve maintenance Problems.", HYDROTRANSPORT 10, Paper D2,

1986, pp 109-121.

[6] Bird,R.B., Stewart,W.E. and Lightfoot,E.N. “Transport

Phenomenon”, Published by John Wiley & Sons Inc. New York,

1960.

200

[7] Bonnington,S. "A Guide to Jet Pump Design", British Chemical

Engineering, vol. 9, 1964, pp. 150-154.

[8] Boothroyd,R.G. “Flowing Gas-Solid Suspensions”, Chapman & Hall

Ltd. , 1971.

[9] Brown, G.G. Katz, Faust, and Shneidewind. “Unit Operations”,

John Wiley & Sons Inc., New York, 1950.

[10] Cairns,J.R., and Na,T.Y. "Optimum design of water jet pumps",

Trans. ASME, J. Engng. for Power, Vol. 91, No. 1, 1969, pp. 62-68

[11] Choi,D.W., Gessner,F.B. and Oates,G.C. "Measurements of

confined, coaxial jet mixing with pressure gradient", Trans. ASME.

J. Fluids Engg., Vol.108, No.1, 1986, pp.39-46.

[12] Colebrook,C.F. J. Inst. of Civil Engg; London, Pt-2, Vol.133, 1938.

[13] Croft,D.R., and Lilley,D.G. "Finite-difference performance analysis

of jet pumps", AIAA J.,Vol.14, No.10, 1976, pp. 1347-1348.

[14] Croft,D.R., Williams,P.D., and Tay,S.N. "Numerical analysis of jet

pump flows", Proc. First. Int. Conf. on Numerical methods in

laminar and turbulent flow, held at Swansea, U.K., 1978, pp.741-

753.

[15] Crowe, C.T., Sharma, M.P., and Stock, D.E. “The Particle – Source

– in - Cell (PSI Cell) Model for Gas Droplet Flows”, ASME J. Fluids

Engg, Vol. 99, 1977.

[16] Cunningham,R.G. "Jet pump theory and performance with fluids of

high viscosity", Trans. ASME. J. Basic Engng. Vol.79, 1957, pp.

1807-1820.

[17] Cunningham,R.G., Hansen,A.G.and Na,T.Y. "Jet Pump Cavitation",

Trans. of the ASME, Journal of Basic Engng, 1970, pp.483-494.

[18] Cunningham,R.G. "Gas Compression with the Liquid Jet Pump",

Trans. of the ASME, Journal of Fluids Engineering, vol. 96, No. 3,

1974, pp. 203-215.

[19] Cunningham and Dopkin "Jet break-up and mixing throat lengths

for the liquid jet gas pump", Trans. of the ASME, J. of Fluids Engg.,

Vol.96, 1974, pp.216-226.

[20] Cunningham,R.G. "Liquid jet pump modeling: Effects of axial

dimensions on theory - experiment agreement". Proc. 2nd

201

Symposium on jet pumps and ejectors and gas lift techniques,

BHRA, 1975, pp. F1-1 to F1-15.

[21] Datta, A.K. “A comparative study of air-lift and water-lift jet pumps

- applicable to deep sea mining”, M.Tech. thesis, IIT Kharagpur,

1984.

[22] Debreczeni,E., Tarjan,I. and Meggyes. "Hydraulic transport

systems in the mining industry using jet slurry Pumps",

HYDROTRANSPORT 6, 1979, pp.315-328.

[23] Drust, F., Kikura, H., Lekakis, I., Jovanovic, J.,and Ye, Q. "Wall

shear stress determination from near wall mean velocity data in

turbulent pipe and channel flows", Experiments in Fluids, Vol.20,

No.6, 1996, pp.417-428

[24] Duckworth, R.A. "Pressure Gradient and Velocity Correlation and

Their Application to Design" Pneumotransport-1, BHRA, 1971,

pp.R2-25-47.

[25] Duckworth,R.A. "A Novel Pumping System for Ocean Mining",

HYDROTRANSPORT - 3, BHRA, 1974, pp. A5-55 to A5-68.

[26] Elger,D.F., McLam,E.T. and Taylor,S.J. "A New Way to Represent

Jet Pump Performance", Trans. of the ASME, Journal of Fluids

Engineering, vol. 113, 1991, pp. 439-444.

[27] Engerlin,C., Gore,R., Legrande,R., Steinbach,D., Crow,C.T., Lee,J.,

Ushimaru,k. and Bernstein,S. " An Experimental Study of

Performance and Erosion of an annular slurry Jet Pump", Third

International Symposium on Solid-Liquid Flows, (Chicago, IL, USA),

ASME, FED Volume-75, 1988, pp 195-202.

[28] Evett, J.B. and Liu, C. “Fluid Mechanics and Hydraulics”, McGraw-

Hill Book Co (Schaum's solved problems series), 1989.

[29] Fish, G. "The solids - handling jet pump". HYDROTRANSPORT 1,

BHRA, 1970, pp.L1-1 to L1-15.

[30] Folsom, R. G. "Jet pumps with liquid drive", Chem. Engg. Progress,

Vol.44, No.10, 1953, pp. 765-770.

[31] Gandhi,R.L., Snoek,P.E., Carney,J.C. "An Evaluation of Slurry

Pumps", Proc. of 5th International Technical Conference on Slurry

202

Transportation (Lake Tahoe, NV, USA), Washington DC, USA,

Slurry Transport Association, 1980, pp.267-275.

[32] Gibson,M.M. "Hydrodynamics of Confined co-axial Jets",

Encyclopedia on Fluid Mechanics, Edited by Cheremisinoff, N.P.,

Gulf Pubs. Co. Houston, 1986, pp.367-390.

[33] Gosline,J.E. and O'Brien,M.P. "The Water Jet Pump", Univ. of

California Publ. in Engg. Vol.3, No.3, 1934, pp.167-190.

[34] Haaland, S.E. Trans. ASME, J. of Fluids Engg. Vol.105, 1983, p.89.

[35] Hedges,K.R. and Hill,P.G. "Compressible flow ejectors part II - Flow

field measurement and analysis", Trans. ASME. J. Fluids Engg.

Vol.96, No.3, 1974, pp.282-288.

[36] Herbich,J.B. “Costal and Deep Ocean Dredging”, Gulf Pubs. Co.,

1975, pp 202-281.

[37] Hill,J.C.C. "Some Practical Experiences with Jet Pumps", 2nd

Symposium on Jet Pumps and Ejectors and Gas Lift Techniques,

BHRA, UK, 1975, pp. X7-X11.

[38] Hill,P.G. "Incompressible jet mixing in converging- diverging axi-

symmetric ducts", Trans. ASME., J. of Basic Engg. Vol.89, No.1,

1967, pp.210-220.

[39] Howell, J.G. "A Least Square Distance Curve Fitting Technique",

NASA TN D-6374, 1971.

[40] Huston,J. "Dredging Fundamentals", J of the Waterways and

Harbors Div. Proc. ASCE, 1967, pp.45-69.

[41] Idelchik, I.E, and Fried, E. “Flow Resistance - A Design Guide for

Engineers”, Hemisphere Publishing Corp, New York, 1989.

[42] Idelchik, I. E. “Fluid Dynamics of Industrial Equipment”,

Hemisphere Publishing Corpn. New York, 1991.

[43] Ishikawa, K. and Nakmura, I. "Performance Chart and Optimum

Geometry of Conical Diffusers with Uniform Inlet flow and Free

Discharge." JSME International Journal, Series II , Vol.32, No.4,

1989, pp 559-567.

[44] Ishikawa,K. and Nakmura,I. "Performance Chart and Optimum

Geometry of Conical Diffusers with Uniform Inlet Flow and Tailpipe

203

Discharge." JSME International Journal, Series II, Vol.33, No.1,

1990, pp.97-105.

[45] Jotaki, T. and Tomita, Y. "Solids Velocities and Pressure Drops in a

Horizontal Pneumatic Conveying System", Proc. Pneumotransport-

1, 1st Int. Conf. on the Pneumatic Transport of Solids in Pipes,

1971, Paper B3-33.

[46] Jumpter,A.M. “Pump Hand Book”, McGraw-Hill Book Co., Edited

by Karassik, I.J. 1976, pp 4.1 to 4.25.

[47] Kato,H. Tamiya,S. and Miyazawa,T. "A Study of an Air-Lift Pump

for Solid Particles and its Application to Marine Engineering", 2nd

Symposium on Jet Pumps and Ejectors and Gas Lift Techniques,

BHRA, UK, 1975, pp. G3-37 to G3-48.

[48] Khuntia,S. and Murty,J.S. "Integrated Slurry Mixing and Feeding

System Using Jet Pump for Hydraulic Transportation of Solids."

Third International Symposium on Solid-Liquid Flows, (Chicago, IL,

USA), ASME, FED Vol.75, 1988, pp 211-216.

[49] Knudsen, J.G and Katz, D.L. “Fluid Dynamics and Heat Transfer”,

McGraw-Hill Book Company, 1958.

[50] Krishna Murthy, E. V. and Sen, S. K. “Computer Based Numerical

Algorithms”, Affiliated East-West Press, New Delhi, 1976.

[51] Krishna Reddy, Y., Ranga Raju, D. and Prem Chand "Computer

Aided Performance Evaluation of Jet Pumps", Journal of Institution

of Engineers (India), vol. 71, part ME 6, 1990, pp. 151-157.

[52] Krutzsch,W.C. “Pump Hand Book”, McGraw-Hill Book Co., edited

by Karassik, I.J. et al., 1976, pp 1-1 to 1-4.

[53] Kudirka,A.A., Gluntz, D.M. "Development of Jet Pumps for Boiling

Water Reactor Re-circulation Systems", Trans. of the ASME, J. of

Engineering for Power, Jan., 1974, pp. 7-12.

[54] Kumagai,T. and Saito,Y. "Water Jet Pumps for Transporting Solid

Materials", Transactions of the JSME, Ser B, Vol. 54, No. 502,

1988, pp. 1385-1388.

[55] Lewitt, E.H. “Hydraulics and Fluid Mechanics”, ELBS, 10th ed.

[56] Low, D.A., “Mechanical Engineer's Pocket Book”. Printed by Neil

and Co. Ltd., Edinburgh. Great Britain, 1961.

204

[57] Madhusudana Rao,M. and Tharumarajan,S. "Experimental

Investigations on Fluidized Gravity Conveying", Bulk Solids

Handling, vol. 6, No. 1, 1986, pp. 99-103.

[58] Malhotra,R.C. "Hydraulic Transportation of Mineral Ores,

Historical Background and Potential in India", Proc. of Workshop

on Hydraulic Transportation of Mineral Ores, held at IIT, New

Delhi, 1979, pp. 1.1 to 1.13.

[59] Malhotra,R.C. "Mechanics of Slurry Transportation", Proc. of

Workshop on Hydraulic Transportation of Mineral Ores, held at IIT,

New Delhi, 1979, pp. 2.1 to 2.41.

[60] Marini,M.; Massardo,A., Satta, A. and Geraci,M. "Low area ratio

aircraft fuel jet-pump performances with and without cavitation", J

of Fluids Engg, Trans of the ASME, Vol.114, No.4, 1992, pp.626-

631.

[61] Malsbury,R.G., Paul,K. and Saad,A. "A jet pump injector for coarse

coal face hydraulic haulage", Proc. 4th Int. Tech. conf. on Slurry

Transportation, Las Vegas, USA, Mar. 28-30, 1979, pp. 221-231.

[62] McCormic,J.M. and Salvadori,M.G. “Numerical Methods in

FORTRAN”, Prentice Hall of India Ltd., New Delhi, 1979.

[63] McLean, A.G. "Blow Tank Design", Bulk Solids Handling, Vol.5,

No.1, 1985, pp.77-82.

[64] Meriam, J.L. “Dynamics”, John Wiley & Sons, 1966.

[65] Mero,J.L. “The Mineral Resources of the Sea”, Elsevier Pubs. Co.,

New York, 1965.

[66] Mikhail, S., Morcos, S. M. and Shaheen, Y. A. " Experimental

investigations of a slurry jet pump", Third Int. Symp on Liquid-

Solid flows, (Chicago, IL, USA) ASME Fluids Engg Div FED Vol.75,

1988, pp.203-210.

[67] Miller D.S. “Internal Flow: A Guide to Losses in Pipe and Duct

Systems”, BHRA, Cranfield, Bedford, U.K., 1971, pp.329

[68] Miller, D.S. “Internal Flow Systems”, BHRA, Fluids Engineering

Series, Vol.5, 1978.

[69] Millerd, J.E., Swienton, J.P. Unlerscher, F. Trolinger,J.D., Smith,

L.G.and LaRue J.C. "Holographic sensor for measurement of wall

205

velocity gradients", Experiments in Fluids, Vol.21, No.6, 1996, pp.

469 - 476.

[70] Mills,D., Mason,J.S. and Agarwal,V.K. "An Analysis of Dilute Phase

pneumatic Conveying of Sand", Proc. of PNEUMATECH 2, Powder

Advisory Conf. held at Canterbury, 1984, pp. 258-278.

[71] Mitra, A.P. "Chemical and Allied Materials from Ocean", Indian

Chemical Engineer, vol. 32, No. 1, 1990, pp. 27-35.

[72] Morikawa,Y., Tsuji,Y. and Tanaka,T. "Measurements of Horizontal

Air-Solid two Phase Flow using an Optical Fibre Probe (particle

velocity and concentration), Bulletin of the JSME, Vol. 29, No. 249,

1986, pp. 802-809.

[73] Morsi,S.A. and Alexander,A.J. Journal of Fluid Mechanics, Vol.55,

1972, p.198.

[74] Mueller,N.H.G. "Water jet pump", Proc. of ASCE, J. of Hydraulics

Div., Vol.90, No.1, 1964, pp. 83-113.

[75] Narui,H. and Inagaki,S. "An Experimental Study on the Flows in

the Jet Pump", Transactions of the JSME, Ser B, Vol. 52, No. 477,

1986, pp. 2032-2037.

[76] Neve, R.S. "The performance and modeling of liquid jet gas pumps",

Int. J. of Heat Flow, Vol.9, 1988, pp.156-164.

[77] Neve,R.S. "Diffuser Performance in Two-Phase Jet Pumps", Int.

Journal of Multiphase Flow, vol. 17, No. 2, 1991, pp. 267-272.

[78] Ng, K.L. "Coal Unloading System Using a Slurry System", Bulk

Solids Handling, vol. 9, No. 3, 1989, pp. 281-287.

[79] Patankar, S.V. and Spalding, D.B. “Heat and Mass Transfer in

Boundary Layers”, Academic Press, New York, 1970.

[80] Perry,R.H. and Chilton,C.H. “Perry's Chemical Engineers'

Handbook”, McGraw-Hill Book Co, New York, 6th ed, 1984.

[81] Prasad,N.K., Prem Chand and Mirajgaokar,A.G. "An Experimental

Study on Solid-Liquid Flow Through Rectangular Ducts", The

Canadian Journal of Chemical Engineering, Vol.58, No. 3, 1980,

pp. 295-298.

206

[82] Prem Chand "Dynamics of Particles and Pressure Drop under

Pneumatic Conveyance", M. Tech. Thesis, Dept. of Mechanical

Engg. IIT, Kharagpur, India, 1967.

[83] Prem Chand "Initial Response of Particles under Hydraulic

Conveyance", The Proc. of the 12th Congress of Theoretical and

Applied Mechanics, Durgapur, India, 12, 1968, pp. 162.

[84] Prem Chand "Critical Analysis of Pressure Drop under Pneumatic

Conveyance" J. of Agri. Engg. Research, 13, March, 1968, pp. 36.

[85] Prem Chand "Response of Particles Under Pneumatic

Conveyance", Proc. 1st International Conference on Pneumatic

Transport of Solids in Pipes, PNEUMOTRANSPORT 1, BHRA, UK,

1971, pp. B6-69 to B6-91.

[86] Prem Chand "A theoretical model of the pneumatic conveying -

drying system", Proc. 2nd Int. Conf. on the pneumatic transport

of solids in pipes, BHRA, 1973, pp. C2-15 - C2-28.

[87] Prem Chand "Determination of Experimental Constants for

Pneumatic Conveying Systems using Least-Square Distance

Technique ", Lecture Notes, IIT, Kharagpur, India, 1978.

[88] Prem Chand and Saha, A.C. "Study of Re-attachment

Phenomenon for Mixing Nozzle", J. of the Institution of Engineers

(India), Vol.58, Pt.M.E, 4th Jan, 1978, pp. 139-144.

[89] Prem Chand and Narasimha Rao,S.V. "Characteristics of a

Modified Blow-Tank System of Pneumatic Conveying", Proc. of

Pneumatech 2, Canterbury, U.K., 1984, pp.174-192.

[90] Prem Chand and Ranga Raju, D. "Jet mixing for hydraulic

transportation", Proc. Symp. on hydraulic transportation of solids

through pipeline, Inst. Engrs, (India), Ranchi, 1985, pp.E.6 -

E.20.

[91] Prem Chand "Design Parameters for Pneumatic Conveying of

Rock-Phosphate and Coal Dust", Projects and Development of

India Ltd., Govt. of India Undertaking, Mechanical Engg.Dept; IIT,

Kharagpur, India, 1989.

207

[92] Prem Chand, Krishna Reddy, A.C. Saha and B.R. Chand “On

Drag Coefficient of non-Spherical Particles”, Powder Handling &

Processing, Vol. 13, No. 3, 2001, pp.289 – 291.

[93] Prem Chand, Krishna Reddy, and A.C. Saha “On Solid-Gas

Diffusion Coefficient”, Powder Handling & Processing, Vol. 13 No.

4, 2001, pp.353 - 356.

[94] Prem Chand and Krishna Reddy “Dynamics of Slurry-Handling

Jet Pump under Subtle Interference – a New Approach”

Proceedings of FEDSEM’03, 4th ASME-JSME Joint Fluids

Engineering Conference, July 6-11, 2003, Honolulu, Hawaii,

USA.

[95] Prem Chand, Govinda Rajulu, K and Krishna Reddy “Modelling

of Slurry-Handling Piping Element Under Interference

Conditions” – Proceedings of HT-FED04, ASME Heat Transfer /

Fluids Engineering Summer conference, July 11-15, 2004,

Charlotte, North Carolina USA.

[96] Prem Chand, K Govinda Rajulu, Krishna Reddy and Prafull

Chand “Dynamics of Slurry handling Jet pump under

interference conditions”, Proceedings of Port Handling Systems,

India 2004, October 5-7, 2004, Mumbai, India.

[97] Qasim,S.Z. "Bonanza from the Sea", Science Today, 1981, pp.15-

24.

[98] Radhakrishnan H.C. and Kumaraswamy,S. "Matching the

Performance of Jet and Centrifugal Pumps", 2nd symp. on Jet

Pumps and Ejectors and Gas Lift Techniques, BHRA, UK, 1975,

pp. B3-25 to B3-36.

[99] Raju,D.R. "Mixing of Water-Solid Mixture with Water Jet", M.Tech

Thesis, IIT, Kharagpur, India, 1979.

[100] Raju,D.R. "Dynamics of Jet Pumps (with specific reference to

hydraulic transportation of solids)", Ph.D. Thesis, IIT, Kharagpur,

India, 1988.

[101] Rao, Singamsetti and Goenka, V. K. "Performance Characteristics

of Jet Pumps", Irrigation and Power, Vol.34, No.4, 1977, pp.487-

501.

208

[102] Reddy,Y.R. and Subir Kar "Theory and performance of water jet

pumps", Proc. ASCE, J. Hyd. Div., Vol.94, No. HY5, 1968,

pp.1261-1281

[103] Rokita,J. "A New Technology of Hydraulic Transport and Storage

of Fly-Ash and Energetistic Slag in the Form of a Mixture with

High Percentage of the Solid Phase." , HYDROTRANSPORT- 11,

1988.

[104] Rose,H.E. and Duckworth,R.A. "Transport of Solid Particles in

Liquids and Gases", The Engineer, vol. 14, No. 21, 1969, pp.1-16.

[105] Saha, A. C. "Wear Modeling of 900 bend conveying air-solid

mixture (under interference conditions due to connecting end

pipes)", Ph.D thesis submitted to IIT, Kharagpur, India, 1996.

[106] Salam,T.F. and Gibbs,B.M. "Gas and Solid Discharge from a

Fluidized Bed Using a Jet Pump", Powder Technology, Vol.50,

No.2, (Apr.1987), pp 111-120.

[107] Sanger,N.L. "Non-cavitating performance of two low area ratio

water jet pumps having throat lengths of 7.25 diameters", NASA

Report No: TN D – 4445, 1968.

[108] Sanger,N.L. "Non-cavitating and cavitating performance of two

low area ratio water jet pumps with throat lengths of 5.66

diameters", NASA Report No. TN D – 4759, 1968.

[109] Sanger,N.L. "Non-cavitating and cavitating performance of several

low area ratio water jet pumps having throat lengths of 3.54

diameters", NASA Report No. TN D-5095, 1969.

[110] Sanger,N.L. "An experimental investigation of several low area

ratio water jet pumps", Trans. of the ASME, J. of Basic Engg,

Vol.92, No.1, 1970, pp.11-20.

[111] Sauermann, H.B. "Fundamental and Applied Research in

Hydraulic. Transportation at the CSIR, Pretoria, South Africa",

Bulk Solids Handling, Vol.3, No.1, 1983.

[112] Schlichting,H. “Boundary Layer Theory”, McGraw Hill Co., 6th

ed., New York, 1968.

209

[113] Schmitt,H. "Diversity of jet pumps and Ejector Techniques", Proc.

2nd symp. on jet pumps and Ejectors and Gas Lift Techniques,

BHRA, Cranfield, UK, 1975, pp. A4-35 to A4-49.

[114] Seshadri,C.V. and Ptankar,S.V. “Elements of Fluid Mechanics”,

Prentice Hall of India Publ., New Delhi, 1971.

[115] Seshadri,C.V. "Basic Process Design", Proc. of Workshop on

Hydraulic Transportation of Mineral Ores, held at IIT, New Delhi,

1979, pp. 3.1 to 3.22.

[116] Shames, I.V. “Mechanics of Fluids”, McGraw-Hill Intl. Co, 1982.

[117] Shih, C.C.S. "Hydraulic transport of solids in a sloped pipe", J. of

the Pipeline Division, Proc. of the ASCE, Vol.90, PL.2, (Nov. 1964),

pp.1-14.

[118] Shimizu,Y., Nakamura,S., Kuzuhara,S. and Kurata,S. "Studies of

the Configuration and Performnce of Annular Type Jet Pumps."

Trans. of the ASME, Journal of Fluids Engineering, (Sept.1987),

Vol.109, No.3, pp. 205-212.

[119] Stepanoff,A.J. “Centrifugal and axial Flow Pumps”, 2ed., Wiley

Pubs., New York, 1964, pp 402-415.

[120] Stewart, D. and Wood, P. A. "Assessment of Equipment for Coal

Slurry Preparation and Pumping", HYDROTRANSPORT 9, BHRA,

Cranfield, UK, 1984, PP. 89-103.

[121] Stockham, J.D. and Fochtman,E.G. “Particle Size Analysis”, Ann

Arbor Science Publishers Inc, 1977.

[122] Swamee, P.K., and Jain, A.K. "Explicit Equations for Pipe Flow

Problems", J. of Hydraulics Division, Proc. ASCE, Vol. 102,

No.Hy5, May, 1976, pp. 657-664.

[123] Taylor, S.G. "The Dispersion of Matter in Turbulent Flow Through

a Pipe", Proc. Roy. Soc. of London, 223, Series A, 1954, p.446.

[124] Thompson, T.L. "From Reynolds to Wasp-Development of an

Industry", Proc. 6th Int. Technical Conf. on Slurry

Transportation, March 24-27, Las Vegas, Nevada, 1981.

[125] Tjondrodiputro,R., Gaul, R. B., Gower G.H. "Hydraulic Jet

pumping in a remote location", World Oil, v.204, n.1, 1987,

pp.80-83

210

[126] Tomita, Y., Tashiro, H., Deguchi, K., and Jotaki, T. "Sudden

Expansion of Two-Phase Flow in Pipe", Physics of Fluids,

American Institute of Physics, Vol.23, No.4, 1980, pp. 663-666.

[127] Tsuji,Y., Morikawa,Y., and Shiomi,H. "LDV Measurements of an

Air- Solid Two Phase Flow in a Vertical Pipe", Journal of Fluid

Mechanics, Vol.139, (Feb. 1984), pp.385-409.

[128] Tsuji,Y., Morikawa,Y., Tanaka,T., Nakatsukasa,N. and Nakalani,

M. "Numerical Simulation of Gas-Solid Two Phase Flow in a Two

Dimensional Horizontal Channel", Int. Journal of Multiphase

Flow, Vol.13, No. 5, 1987, pp. 671-684.

[129] Ueda,T. "Study on water jet-pump", Bulletin of the JSME, Vol.20,No.89, 1954, pp. 25.

[130] Vega,L.A. "Deep ocean mining of manganese nodules- Fluid-flow

Transport and hardware feasibility analysis", Proc. 6th Int. conf.

on Slurry Transportation, (Las Vegas, USA), 1981, pp. 81-99.

[131] Wakefield,A.W. "Practical solids handling jet pumps", First

International Conf on Jet pumps and Ejectors, BHRA, Cranfield,

UK., 1972.

[132] Wakefield,A.W. and Ruckley,A.L. "Performance of Solids handling

Jet Pumps at low Reynolds Numbers", 2nd symp. on Jet Pumps

and Ejectors and Gas Lift Techniques, BHRA, Cranfield, UK,

1975, pp.A3-23 to A3-33.

[133] Wakefield,A.W. "The Handling of Sand Deposits and Littoral Drift

by Submerged Jet Pump, With reference to the Nerang River

Project.", HYDROTRANSPORT 10, BHRA, Cranfield, UK paper D3,

1986, pp. 123-141.

[134] Wang,J.S. and Tullis,J.P. "Turbulent Flow in the Entry Region of

a Rough Pipe", Trans. of the ASME, Journal of Fluids

Engineering, vol. 96, No. 1, 1974, pp. 62-68.

[135] Wasp,E.J., Kenny,J.P. and Gandhi,R.L. “Solid-Liquid Flow Slurry

Pipeline Transportation”, Trans. Tech. Pubs, 1977.

[136] Weber,M., Dedegil,Y. and Feldle,G. "New Experimental Results

Regarding Extreme Operating Conditions in Air Lifting and

Vertical Hydraulic Transport of Solids according to the Jet-Lift

211

principle and its applicability to Deep-sea Mining",

HYDROTRANSPORT - 5, BHRA, Cranfield, UK, 1978, pp.F7-1 to

F7-26.

[137] Weber, M. "Vertical Hydraulic Conveying of Solids by Air-Lift",Journal of Pipelines, Vol.3, No.2, 1982, pp. 137-152.

[138] Weber,M. "Principles of Hydraulic and Pneumatic Conveying in

Pipes", The Best of Bulk Solids Handling, 1981-1985, vol. E/86,

Trans Tech Pubs, 1986, pp. 1-7.

[139] Welty, J.R., Wicks, C.E. and Wilson, R.E. “Fundamentals of

Momentum, Heat and Mass Transfer”, John Wiley & Sons, 1984.

[140] White,J.F.C. and Seal,M.E.J. "Sea sand Handling and Pumping at

Cockburn Cement", HYDROTRANSPORT 8, BHRA Cranfield, UK,

1982, pp.63-75.

[141] Wiedenroth,W. "An Experimental Study of Wear of Centrifugal

Pumps and Pipeline Components", Journal of Pipelines, vol. 4,

No. 3, 1984, pp.223-228.

[142] Xiao,Z.H. "Centrifugal Jet Pump - A Novel Type of Equipment for

Handling Coarse Solids." HYDROTRANSPORT 10, BHRA,

Cranfield, UK, Paper H2, 1984, pp 359 -374.

[143] Yano,H., Funaki,J., Shinoki,T., Keid,A. and Simotori,S.

"Performance of a New Type of Water Jet Pump." Trans. of the

ASME, Journal of Engineering for Industry, (May 1990), Vol. 112,

1990, pp 172-174.

[144] Zandi,I. and Govatos,G. "Jet pump in slurry transport",HYDROTRANSPORT - 1, BHRA, Cranfield, UK, 1970, paper L2-17to L2-32.

[145] Zandi,I., Allen,W.B., Morlok,E.K., Gimm,K., Plaut,T. andWarner,J. "Transport of Solid Commodities Via FreightPipelines", Report prepared for U.S. Department ofTransportation, 1976.

A P P E N D I X - A