RACI ref ANG KONTROLA 4 ver.: 1.13

RACI d.o.o. Tehnološki park 24

SI-1000 LJUBLJANA, SLOVENIA VAT No.: SI80268170

Registration No.: 5865425 Bank Accounts:

NLB; IBAN: SI56 0208 5001 6765 554 BK; IBAN: SI56 1010 0004 3925 378

REFERENCES OF INSPECTION BODY RACI ELAN, Begunje, CEMS Incineration plant: Particulates (2002, 2003). ISTRACEMENT, Pula, Croatia, CEMS Ovens: Particulates (2002). VIPAP, Krško, CEMS K5: Particulates (2003). NOVARTIS, LEK, Lendava, CEMS Incineration plant: Particulates (2004, 2006,

2009), CO, NOX, SO2, TOC, CO2, O2, H2O, HCl, HF, Particulates, Flow Rate (QAL2 2011).

TE-TOL, Ljubljana, CEMS Common stack: Particulates (2006). KNAUF Insulation, Škofja Loka, CEMS Cupola furnace 1: Particulates (2006). KEK, Priština, Kosovo, blok B, CEMS Large combustion plant: AMS B1L: Particulates (2006, 2007,

AMS B1R: Particulates (2006, 2007). ACRONI, Jesenice, CEMS Steel production: AMS Bag filter: Particulates (2007), AMS Wet filter:

Particulates (2007). LAFARGE Cement, Trbovlje, CEMS desulphurisation plant: Particulates (2007),CO, NOX, SO2, TOC,

CO2, O2, HCl, HF, H2O, Particulates, Flow Rate, T, p (QAL2 2010), CEMS klinker cooler: Particulates (2007, QAL2 2011), CEMS coal mill: Particulates (2007), CEMS Before NRDP: Particulates (2007), CEMS cement mill: Particulates (QAL2 2011).

ELAN, Begunje, CEMS Incineration plant: CO, NOX, O2 (2008, AST 2009). LAFARGE BFC, Beočin, Serbia, CEMS Preparation of raw material: Particulates (2008), NO, SO2, O2,

particulates (QAL2 2010), CEMS Oven: Particulates (2008), NO, SO2, O2, Particulates (QAL2 2010). TE Pljevlja, Pljevlja, Montenegro, CEMS Large combustion plant: CO, NOX, SO2, CO2, O2, H2O,

Particulates, Flow Rate, T, p (QAL2 2010, AST 2011) ŠTORE STEEL, Štore, CEMS Steel production: Particulates, Flow Rate (QAL2 2011). NOVARTIS, LEK, Mengeš, CEMS Co-incineration plant: CO, NOX, TOC, O2, H2O, Particulates, Flow

Rate, T, p (QAL2 2011). Measurements are performed to: EN 15058 and ISO 12039 for mass concentration of CO; ISO 12039 for volume fraction of CO2; EN 14789 and ISO 12039 for volume fraction of O2; EN 14792 and ISO10849 for mass concentration of NOX; EN 14791 and ISO 7935 for mass concentration of SOX; EN 12619 or EN 13526 for mass concentration of TOC; ISO 10780 for velocity and volume flow of gases; EN 14790 for volume fraction/mass concentration of moisture (H2O); EN 13284-1 or ISO 9096 for mass concentration of total dust; VDI 2066 Bl. 10 for mass concentration of PM10 and PM2,5; EN 1911 for mass concentration of gaseous chlorides (HCl); ISO 15713 for mass concentration of gaseous fluorides (HF); VDI 3496, Blatt 1 for mass concentration of ammonia (NH3). Automated sampling of gas emissions is performed to ISO 10396 for O2, CO, CO2, SO2, NO, CH4. Inspection of automated measurement systemsfor QAL2 and AST is perfomed to EN 14181, EN 13284-2 and internal procedures DP13 and DP20.

RACI ref ANG KONTROLA 1 ver.: 1.13

RACI Rationalization of Combustion Processes d.o.o. Company in Ljubljana Technology Park

address: Tehnološki park 24 SI-1000 LJUBLJANA, SLOVENIA

phone: +386 1 620 33 80 fax: +386 1 620 33 90 e-mail: info@raci.si URL: http://ww.raci.si

The RACI company was founded in 1994 as the Technology Transfer Centre supported by the Slovenian Ministry of Science and Technology. The motive for its foundation stemmed from long-standing activities of Slovenian "Jožef Stefan" Institute in the field of combustion processes control, i.e. the O2 control. RACI operates within the framework of the Ljubljana Technology Park.

RACI is acting in the field of energy/environmental engineering. Main activities concern emission and process gas measurements as well as development, consulting, design, installation, commissioning, calibration and maintenance of systems for continuous and discontinuous measurement of gases and emissions (AMS, DAHS, CEMS). World-wide renowned and proven analytical equipment produced by ABB, BÜHLER, DURAG, ENOTEC, INTERTEC, JCT, MICHELL INSTRUMENTS, Paul GOTHE, PCME, SIEMENS, S.K.I. and others are integrated in RACI measuring solutions.

With extensive experience in the field of gas analysis in processes and emission RACI is able to offer complete and competent turnkey solutions of contemporary, proven and robust automated measuring systems (AMS) for continuous and discontinuous monitoring with competent and compliant solutions, low costs of ownership, high reliability and availability as well as high quality i.e. reliability, comparability and traceability of measurements to its customers.

Our goal is a trademark that guarantees competent solutions, high quality of delivered AMS, availability of plants as well as high quality and traceability of measurements.

Within RACI company operate: testing laboratory Merilni laboratorij

RACI accredited to SIST EN ISO/IEC 17025:2005, and

inspection body Kontrolni organ RACI accredited to SIST EN ISO/IEC 17020:2004 as inspection body type C.

RACI is authorized by the Slovenian Ministry of Environment and Spatial Planning to perform monitoring of the emission of substances into the atmosphere and for inspection of AMS (QAL2 and AST to EN 14181).

Our advantages: high quality, i.e. reliability, comparability and traceability of measurements, competent and compliant solutions, contemporary, proven and robust AMS, quality assurance and calibration of AMS, high reliability and availability of AMS, low cost of ownership of AMS, complete and competent turn-key service.

RACI ref ANG KONTROLA 2 ver.: 1.13

Diverse, but uniform solutions!

Gases/Vapours by instrumen-tal methods, monitoring of CO, NO, SO2, CO2, O2, TOC

Sampling train for wet sampling methods: SO2, H2O, HCl, HF, NH3

Sampling train for particulates – parallel testing

Parallel testing of AMS against standard reference method – QAL 2

RACI ref ANG KONTROLA 3 ver.: 1.13

Performing an inspection of AMS and results of inspection

Dust analyser calibration according to EN 13284-2

Your partner in gas analytics