Ref
-
Upload
dattatraya-parle -
Category
Documents
-
view
5 -
download
0
description
Transcript of Ref
-
BIBLIOGRAPHY
Baudrand, D. W. Metals Hand Book, 8th Edition. Ohio, USA: American Society for
Metals. 1978.
Bhattacharyya, A. Metal Cutting Theory and Practice. pp. 53, 120. Calcutta: New
Central Book Agency (P) Ltd. 1996.
Blackley, W. S., R. O. Scattergood. Ductile-regime model for diamond turning of
brittle materials. Precision Engineering, Vol. 13, No. 2. pp. 95-103. 1991.
Boothroyd, Geoffrey. Fundamentals of Metal Machining and Mahcine Tools. pp. 92-
104, Washington D.C., USA: Scripta Book Company. 1975.
Bozordat, R. M. Physical Review, 26. p. 390. 1925.
Broberg, K. Bertram. Crack and Fracture. pp. 14-15, Cambridge, UK: Cambridge
University Press. 1999.
Caddell, Robert M. Deformation and fracture of Solids. p. 208, NJ, USA: Prentice-
Hall Inc. 1980.
Casstevens, J. M., C. E. Daugherty. Diamond Turning Optical Surfaces on Electroless
Nickel, SPIE Vol. 159, Precision Machining of Optics, pp. 109-113. 1978.
Cheung, C. F., W. B. Lee. Characterisation of nanosurface generation in single-point
diamond turning, Journal of Machine Tools and Manufacture, Vol. 41, pp. 851-875.
2001.
98
-
Bibliography
Childress, F. G., Eary, S. H., and McLaughlin, J. E. Cleaning and Protecting LASL
Laser Mirrors, Y/DA-7591, p. 23, Union Carbide Corporation-Nuclear Division, Oak
Ridge Y-12 Plant, Oak Ridge, Tennessee, March 1978.
Collins, Jack A. Failure of Materials in Mechanical Design. p. 34, NY, USA: John
Wiley & Sons. 1993.
Dieter, George E. Mechanical Metallurgy. pp. 145-146, 246-248, London, UK:
McGraw Hill Book Co. 1988.
Dini, J. W. Electroless Nickel An Important Coating for Diamond Turning
Applications. In Proc. Electroless Nickel Conference II, March 1981, Cincinnati, Ohio,
USA.
Duncan, R. N. Properties and Application of EN. Finishers Management, Vol. 26.
1981.
Duncan, R. N. Metallurgical Structure of EN Deposit. Plating and surface finishing,
Vol. 83. p. 65. 1996.
Fang, F. Z., V. C. Venkatesh. Diamond Cutting of Silicon with Nanometric Finish.
Annals of the CIRP. Vol. 47-1. pp. 45-49. 1998.
Hosthersall, A. W. Instt. Metals, Vol. 107. 1948.
Ikawa, N., R. R. Donaldson, R. Komanduri, W. Konig. P. A. McKeown, T. Moriwaki,
I. F. Stowers. Ultraprecision Metal Cutting-The past, the Present and the Future,
Annals of the CIRP. Vol. 40/2/1991, pp. 587-593. 1991.
99
-
Bibliography
Jared, Bradley H., Thomas A. Dow. Investigation and prediction of chip geometry in
diamond turning. Precision Engineering, Vol. 24, pp. 88-96. 2000.
Kim, Jeong-Du. and Dong Sik Kim. Theoretical analysis of micro-cutting
characteristics in ultra-precision machining, Journal of Materials Processing
Technology, Vol. 49, pp. 387-398. 1995.
Kui, Liu. Ductile Cutting for Rapid Prototyping of Tungsten Carbide Tools. Ph.D
Thesis, National University of Singapore. 2002.
Li, X. P., M. Rahman, K. Liu, K. S. Neo, and C. C. Chan. Nano-precision
measurement of diamond tool edge radius for wafer fabrication. Journal of Materials
Processing Technology, 140. pp. 358-362. 2003.
Mallory, Glenn O., Juan B. Hajdu. (ed). Electroless plating: fundamentals and
applications. Chapter 4, pp. 111-135, Orlando, Florida, USA: American Electroplaters
and Surface Finishers Society. 1990.
Meguid, S. A. Engineering Fracture Machanics. pp. 93-94, Essex, England: Elsevier
Science Publishers Ltd. 1989.
Moriwaki, Toshimichi, Akira Horiuchi, Koichi Okuda. Effect of cutting heat on
machining accuracy in ultra-precision diamond turning. Annals of the CIRP, Vol. 39/1.
pp. 81-85. 1990.
Oomen, J. M., J. Eisses. Wear of monocrystalline diamond tools during ultra-precision
machining of non ferrous metal. Precision Engineering. Vol. 14, No. 4, pp. 206-218.
1992.
100
-
Bibliography
Oomen, J. M., Philips Research Laboratories, Eindhoven, The Netherlands. Personal
Communication, 13th August, 2003.
Pramanik, A., K. S. Neo, M. Rahman, X. P. Li, M. Sawa, and Y. Maeda. Cutting
performance of diamond tools during ultra-precision turning of electroless nickel
plated die materials. Journal of Materials Processing Technology. Vol. 140, Issue 1-3.
pp. 308-313. 2003.
Reidel, Wolfgang. Electroless-Nickel Plating. pp. 9-11, Ohio, USA: ASM
International. 1991.
Sanger, G. M., J. W. Dini. A perspective on electrodeposited and electroless nickel
coatings used in optical applications. In Proc. SUR/FIN 82. American Electroplaters
and Surface Finishers Society. 1982.
Saxena, Ashok. Nonlinear Fracture Mechanics for Engineers. pp. 8-11, Forida, USA:
CRC Press LLC,. 1998.
Spencer, L. F., Electroless Nickel Plating A Review, Metal Finishing, pp. 58-64,
December 1974.
Syn, C. K., J. W. Dini, J. S. Taylor, G. L. Mara, R. R. Vandervoort, and R. R.
Donaldson. Influence of Phosphorous Content and Heat Treatments on the
Machinability of Electroless Nickel Deposits. In Proc. Electroless Nickel Conference
IV, April 1985, Chicago, Illinois, USA, pp. 5-1 to 5-15.
Syn, C. K., J. S. Taylor, and R. R. Donaldson. Diamond tool wear vs. cutting distance
on electroless nickel mirrors. Proc. SPIE, Vol. 676, pp 128-140. 1986.
101
-
Bibliography
Taheri, Ray. Evaluation of Electroless Nickel-Phosphorous (EN) Coatings. Ph.D
Thesis, University of Saskatchewan, Canada. Spring, 2003.
Taylor, J. S., C. K. Syn, T. T. Saito, and R. R. Donaldson. Surface finish
measurements of diamond-turned electroless-nickel-plated mirrors. In Proc. SPIEs
29th Annual Technical Symposium, August 1985, San Diego, CA, USA.
Trent, Edward M., Paul K. Wright. Metal Cutting, 4th Edition. pp. 62-74, MA, USA:
Butterworth Heinemann. 2000.
Weule, H., V. Hntrup, H. Tritschler. Micro-Cutting of Steel to Meet New
Requirements in Miniaturization, Annals of the CIRP. Vol. 50/1/2001, pp. 61-65. 2001.
Yan, Jiwang, Katsuo Syoji, Tsunemoto Kuriyagawa, Hirofumi Suzuki. Ductile regime
turning at large tool feed, Journal of Materials Processing Technology, 121. pp. 363-
372. 2002.
Yan, Jiwang, Katsuo Syoji, Junichi Tamaki. Some observations on the wear of
diamond tools in ultra-precision cutting of single-crystal silicon, Wear, 255. pp. 1380-
1387. 2003.
http://www.mmsonline.com/articles/0200cnc.html 24th September, 2003.
http://machine-tools.netfirms.com/01_chip_formation.htm#discontinuous
26th September, 2003.
102