Redesign of LumiCal mechanical structure
10
Redesign of LumiCal mechanical structure .Daniluk, E.Kielar, J.Kotula, K.Oliwa, Wojciech Wierba , L.Zawiejski Institute of Nuclear Physics PAN Cracow, Poland FCAL Meeting, TelAviv University, TelAviv, 03-05.10.2010
description
Redesign of LumiCal mechanical structure. W.Daniluk, E.Kielar, J.Kotula, K.Oliwa, Wojciech Wierba , L.Zawiejski Institute of Nuclear Physics PAN Cracow, Poland. FCAL Meeting, TelAviv University , TelAviv , 03 - 05 . 10 .20 10. Motivation. - PowerPoint PPT Presentation
Transcript of Redesign of LumiCal mechanical structure
Redesign of LumiCal mechanical structure
W.Daniluk, E.Kielar, J.Kotula, K.Oliwa, Wojciech Wierba, L.Zawiejski Institute of Nuclear Physics PAN
Cracow, Poland
FCAL Meeting, TelAviv University, TelAviv, 03-05.10.2010
Motivation
Reduce heavy material (tungsten) in inactive zone (ring between radius from ~200 mm to ~250 mm) .
Find more space for FE electronics and some ‘symmetry’ – same layout for all fan out and FE PCB.
We have found some misunderstanding among many people concerning the LumiCal mechanical structure – clarify the design.
“Old” design of LumiCal
No ‘symmetry’, leak of space for fan out bonding.
Design overview
Each calorimeter is in a form of a barrel which is divided into two parts along the vertical plane .
The proposed LumiCal detector will consists of 30 layers of tungsten of 1 radiation length thickness and 320 m silicon sensors layers.
The sensitive region extends from 80 mm to 195.2 mm in radius.
The outer radius of calorimeter is foreseen to be 280 mm to cover the space for front end electronics, readout cables, cooling and precision positioning sensors.
The mechanical inner radius is 76 mm.
“New” design of LumiCal
Smaller in diameter fixing bolts, more space for FE electronics, ‘full symmetry’. Fan out layout and FE PCB can have identical shape for all sensor tiles(4 sectors).
Space for FE electronics
One LumiCal will have 92160 electronic readout channels. On one half plane it should be a place for 1536 electronic channels.
The goal was to have all electronics for silicon tiles identical.
Detailed half plate design
Due to rotation of odd and even sensor planes by 3.75° to overlap the gaps in Tungsten absorber, some space for electronics (with full symmetry) is lost, but our design minimize it.
We foresee 3 fixing bolts to mount one half plane, but it is possible to have 5 fixing bolts per half plane. More fixing bolts will increase the stiffness of LumiCal mechanical construction.
Proof of the design
Simple model in 1:1 scale of a part of the mechanical structure from transparent plastics has been made to proof the design.
Space for cables and cooling
The electronic channels of LumiCal will be read in digital form to the DAQ placed ~10 m far from the detector outside the ILD. The cooper LVDS TP cables will go from each half plane of LumiCal around the barrel to the
back side of each LumiCal where Data Concentrator will be placed. From Data Concentrator we foresee optical links to the DAQ. The fibre optics cables
will go over LHCal and inside the square support tube (near QD0 magnet)
outside the ILD detector.
Conclusions
• To find a space for FE electronics with some symmetry, we have to sacrifice the simplicity of LumiCal mechanical design – we will have 4 different shape tungsten half plates instead of 1 (2?).
• Design of new FE placement has started.
• Simple model in 1:1 scale of a part of the mechanical structure from transparent plastics has been made to proof the design.
• Real model in 1 :1 scale of full LumiCal from steel will be made in second half of 2010.
