recessed 6 ROUND DOWNLIGHT IC RATED / SUPER … · 1701 • 994 JEFFERSON STREET FALL RIVER MA...
Transcript of recessed 6 ROUND DOWNLIGHT IC RATED / SUPER … · 1701 • 994 JEFFERSON STREET FALL RIVER MA...
1703
WWW.SPECLIGHT.COM • 994 JEFFERSON STREET, FALL RIVER, MA 02721 • 508.678.2303 FAX 508.678.2260
CAT. NO.:
PROJECT: TYPE:
recessedfixtures
Dimensions and values shown are nominal. Spectrum Lighting continually works to improve products and reserves the right to make changes which may alter the performance or appearance of products.
5YEAR
WARRANTY
COMMERCIAL DOWNLIGHT SERIES BY SPECTRUM
C
D
EXAMPLE: SGSI6OS15LE1BH27/AR6221OS15L35KMWSONOTES:1 Nominal Source Lumens at 3500K 2 Nominal Delivered Lumens at 3500K with MW-FO90 3 Contact Factory for Additional Options 4 See Product Options Page for Details 5 Standard Bar Hangers 6 Contact Factory 7 Order DS101/2 When Specifying ZIG or BLU 8 EM Will Not be Accessible Through Fixture 9 Standard Finish 10 Contact Factory for Special Finishes 11 Standard Lens 12 Flange and Reflector Same Finish
SGSI6OS - TRIM FLANGE / IC RATEDAPPLICATION
6" recessed round super shallow open aperture downlight for general downlighting.
FEATURES
Fixture rated for direct contact with insulation. Under 3.5" deep super shallow fixture
housing. Zhaga International Standard LED module for ease of maintenance and
replacement. Tool-less LED module, driver and J-Box access. Multi-Bar mounting
brackets. BH27 Standard mounting bars included. Posi-lock trim retention torsion
springs. Integral 0.625" collar.
TRIM FINISH
A variety of architectural powdercoat and anodized finishes are available.
Matte white self-flange is standard.
ELECTRONICS
LED module features high brightness white Osram LEDs. 3-step MacAdam Ellipse
binning and CRI 84 minimum. Full range of electronic 120V/277V and dimming drivers.
CONSTRUCTION
Housing/frame constructed of #20 ga. galvanized steel to resist corrosion. Self-flanged
one piece trim spun from 0.063" thick high purity aluminum and finished to specification.
Passive machined aluminum heatsink.
CODE COMPLIANCE
BAA Compliant. IC rated. ETL/CSA listed for damp locations. Optional Wet location.
LM79/LM80/TM21 data available. Manufactured and tested to UL standards No.
1598/8750.
A B C D3.5
88.9 mm.625
15.9 mm17.17
436.1 mm9.5
241.3 mm
S1 S2 S35.5
139.7 mm6.3
160.0 mm7.7
195.6 mm
ZHAGA COMPLIANT LED MODULE
#20 GA. GALVANIZED STEEL HOUSING
.063 ALUMINUMSELF-FLANGE TRIM
PASSIVE ALUMINUM HEAT SINK
MULTI-BAR MOUNTING BRACKET
OPTICAL SYSTEM WITH LENS
S1B
A
S2S3
6" ROUND DOWNLIGHTIC RATED / SUPER SHALLOW
OS SERIES / 1500 LUMENS MAX
WATTAGE TO LUMENS UPDATE
CURRENT PART NUMBER EXAMPLE
PREVIOUS PART NUMBER EXAMPLE
SOURCE LUMENS1
DELIVERED LUMENS2
SYSTEM WATTS LPW
SGSI6OS10L SGSI6LEDOS10L 1000 849 10.46 81
SGSI6OS15L SGSI6LEDOS15L 1500 1223 13.24 92
SERIES LUMENS1 DRIVER / VOLTAGE3 OPTIONS4
SGSI6OS 10L15L
1100 Lm1500 Lm
E_DS10_
DO10_DS2W1
Electronic Driver10%, 0-10V 1%, 0-10V 1%, ELV/MLV, 120V
12
120V277V
BH275
H12H06
CB24FSEB
CCEA
CRPR6
GRZIG7
BLU7
EMRM8
AMB
27" Solid Bars12' - 24" Expandable Bars6' - 12" Expandable Bars24" C-Channel BarsFusingFixture Painted BlackChicago Ceiling Plenum RatedCorrosion ResistantDeep Ceiling ExtensionGoof RingZigBee ModuleBluetooth LERemote EM Battery PackAnti-Microbial Finish
TRIM LUMENS1 CCT TRIMS / FINISH TRIM OPTIONS
AR6221OS 10L15L
1100 Lm1500 Lm
27K30K35K40K
2700K3000K3500K4000K
MW9
MBPTOBCHASAC
AMSNCOGH
CC10
Matte White Matte BlackPlatinum SilverOil Rubbed BronzeCharcoalAnodic SapphireAnodic ChampagneAnodic MalachiteSun GoldCopper MetallicGraphiteCustom Color
FO9011
GSWL
PF12
AMB
White Optical AcrylicGasketWet LocationPolished FlangeAnti-Microbial Finish
1701
WWW.SPECLIGHT.COM • 994 JEFFERSON STREET, FALL RIVER, MA 02721 • 508.678.2303 FAX 508.678.2260
CAT. NO.:
PROJECT: TYPE:Dimensions and values shown are nominal. Spectrum Lighting continually works to improve products and reserves the right to make changes which may alter the performance or appearance of products.
recessedfixtures6" ROUND LED DOWNLIGHT
IC RATED / SUPER SHALLOW OS SERIES / PHOTOMETRIC DATA
SINGLE UNIT: PERFORMANCE INITIAL FOOTCANDLES AND BEAM ANGLE DIAMETERS
Mounting Height*
FC at Center
Diameter of Beam**
FC at Beam**
5.5' 16 13.5' 3
6.5' 12 15.9' 2
7.5' 9 18.4' 2
8.5' 7 20.8' 1
10.0' 5 24.5' 1
12.0' 3 29.4' 1
14.0' 3 34.3' 1
16.0' 2 39.2' 0
* From aperture to horizontal surface below.** At IESNA defined Beam Angle, to 50% Max. CP.
TEST: SP-00529 (PHOTOPIA)
Angle CP at 0°
0 498
5 486
10 472
15 456
20 446
25 413
30 383
40 328
50 253
60 180
70 99
80 30
90 1
CANDLEPOWER CURVE
124
0° 10° 20° 30°
40°
50°
70°
60°
80°
90°
249
373
498
SGSI6LEDOS-15LE1-AR6221OS-15L35K-MWFO90
ZONAL LUMENS
0-10 46 4%
0-20 174 14%
0-30 364 30%
0-40 589 48%
0-60 1009 82%
0-80 1211 99%
0-90 1223 100%
TotalLumens 1223 100%
Delivered Lumens:Luminaire Watts:
LER:
122313.292
Spacing Ratio:CP @ 0° (Nadir):Beam Angle:
CRI:
1.16498101.5°84
Output Multipliers: 10L x 0.52, 15L x 0.75
15L - 84 CRI
trim finishoptions
1701
WWW.SPECLIGHT.COM • 994 JEFFERSON STREET, FALL RIVER, MA 02721 • 508.678.2303 FAX 508.678.2260
CAT. NO.:
PROJECT: TYPE:Dimensions and values shown are nominal. Spectrum Lighting continually works to improve products and reserves the right to make changes which may alter the performance or appearance of products.
TRIM FINISH OPTIONSOSRAM SERIES
Spectrum Lighting runs a state of the art powder coat process with a five stage chromate pretreat and multistage cloring oven. Spectrum also has a custom finish booth for special finishes and paints. Colors shown are printed versions of the Spectrum paint and powder coat colors. Please note that no printed image can equal the exact color of finish on metal.
PTplatinum silver
SGsemi-diffuse
MWmatte white
BZbronze
MBmatte black
OBoil rubbed bronze
HZhaze full diffuse
ASanodic sapphire
ANanodic natural
CHcharcoal
AKanodic black
GHgraphite
ACanodic champagne
SNsun gold
AManodic malachite
AZanodic bronze
COcopper metallic
CLASSIC ANODIZED ALZAK FINISHES
ENVIRO-PRO ANODIC POWDER ARCHITECTURAL FINISHES
SOME OPTIONS NOT AVAILABLE ON ALL FIXTURES, CONSULT SPECIFICATION SHEETS.SEE INDIVIDUAL SPECIFICATION SHEETS OR CONSULT FACTORY FOR ADDITIONAL INFORMATION.
NOT AVAILABLE ON PRODUCTS WITH DIE-CAST TRIMS.
WWW.SPECLIGHT.COM • 994 JEFFERSON STREET, FALL RIVER, MA 02721 • 508.678.2303 FAX 508.678.2260
CAT. NO.:
PROJECT: TYPE:Dimensions shown are nominal. Spectrum Lighting is continually improving products and reserves the right to make changes that will not alter performance or appearance with or without written notice.
1701
recessedfixtures
SOME OPTIONS NOT AVAILABLE ON ALL FIXTURES, CONSULT SPECIFICATION SHEETS.SEE INDIVIDUAL SPECIFICATION SHEETS OR CONSULT FACTORY FOR ADDITIONAL INFORMATION.
All Spectrum Recessed Frames have wire mount provisions.
ADDITIONS
MOUNTING BAR OPTIONS
FS - FUSING
GS - GASKET
BH27 - 27" SOLID BARS CB24 / CB48 - C-CHANNEL BARS CH24 / CH36 - CHICAGO BARS
Factory installed, slow blow type fuse protects fixture against voltage surges.
Gasket for trims. Fits in back of trim flange. Best for rough ceilings.
All materials go through seven stage powder coat process. All untreated components are aluminum.
Standard on all SG series recessed fixtures. May be field bent or cut to fit job site applications. #14 GA galv. steel solid mounting bar. Fits all Spectrum recessed fixtures. Mounting holes and nail in feature. Vertical and horizontal adjustment.
H06 / H12 - EXPANDABLE BARS
Standard on all SP and optional on SG fixtures. Galvanized steel expandable bar mounting bars. Designed for T-Grid,wood and metal joists. Slot for T-Grid with optional screw lock-down. Nail-in feature for wood studs. Screw hole feature for metal studs. Compresses to 12" and expands to 24". Vertical and horizontal adjustment.
Optional on all SG series fixtures. #16 GA galv. steel C-Channel bar. Designed for T-Bar ceilings. Available in 24" and 48" standard lengths. Custom sizes available. Strong enough to support all Spectrum recessed fixtures.
Optional on all SG series available for 24" and 36" OC Ceiling designs. Proprietary latch design engages Chicago bar and locks fixtures in place. Optional tek screw down holes. Fixture locates at center of bar, but will adjust across full length of bar.
RECESSED OPTIONS
CR - CORROSION RESITANT PR - DEEP CEILING EXTENSION GR - GOOF RING
Special Anti Microbial powdercoat finish resists and inhibits bacterial growth.
AMB - ANTI MICROBIAL
All SG fixtures have standard 5/8" plaster neck and are designed to work in up to 1" thick ceiling. For deeper / thicker ceilings the PR plaster ring option (Specify Depth in Inches).
May be factory installed. Consult factory for availability.
Goof rings are spun .050 aluminum and finished matte white to match trim flange. These oversize rings cover up rough or poorly cut out holes. Goof rings seat and center trims. Special sizes available.
EMERGENCY BATTERY
LED SERIES
EM5W SOURCE LUMENS
(90 MIN)
EM7W* SOURCE LUMENS
(90 MIN)
EM12W SOURCE LUMENS
(90 MIN)
OS 500 Lm 700 Lm 1100 Lm
XT 600 Lm 800 Lm 1300 Lm
GV 700 Lm 900 Lm 1600 Lm
UL 1310 Certified, Class 2 Compliant. Rated for 10 year service life. Recyclable Ni-Cad battery. Includes single-piece TBTS test switch and charge indicator accessory. Constant power supply for superior lumen maintenance. Rated for 90 minute operation. This product has been tested on our OS, XT and GV LED systems and maintains 5-year warranty. Listed for use in damp locations and in enclosed and gasketed fixtures. May be ordered as remote mount for field installation up to 20' from fixture. Consult factory for remote EM options.
EM5W - Optional EM12W - Optional
5W Emergency Battery for LED 120V/277V
12W Emergency Battery for LED 120V/277V
*Standard Wattage Shipped
EM7W*
7W Emergency Battery for LED 120V/277V
optionsdimming
1701
WWW.SPECLIGHT.COM • 994 JEFFERSON STREET, FALL RIVER, MA 02721 • 508.678.2303 FAX 508.678.2260
CAT. NO.:
PROJECT: TYPE:Dimensions and values shown are nominal. Spectrum Lighting continually works to improve products and reserves the right to make changes which may alter the performance or appearance of products.
DIMMING TYPE SYSTEM DIMS TO WIRINGDS101/2 120V/277V 0-10V Low Voltage Dimming 0-10V 10% See Figure 1.
DO101/2 120V/277V 0-10V Low Voltage Dimming 0-10V 1% See Figure 1.
DS2W1 120V Phase Cut Dimming ELV or MLV 1% See Figure 2.
DLTE1 120V Lutron® 2-Wire Phase Cut Dimming Lutron® Phase Cut 1% See Figure 2.
DL331/2 120V/277V Lutron® 3-Wire Dimming Lutron® 3-Wire 1% See Figure 3.
DL3E1/2 120V/277V Lutron® EcoSystem® Dimming Lutron® Ecosystem® 1% See Figure 4.
LDE1/2 120V/277V Lutron® EcoSystem® Dimming, Fades to Black Lutron® Ecosystem® 1% See Figure 4.
EL101/2 120V/277V 0-10V Low Voltage 1% eldoLED Dimming 0-10v eldoLED 1% See Figure 1.
ED011/2 120V/277V 0-10V Low Voltage 0.1% eldoLED Dimming 0-10v eldoLED 0.1% See Figure 1.
DALI 120V/277V DALI Digital Addressable Lighting Interface DALI 1% See Figure 5.
DMX 120V/277V DMX Addressable Lighting Interface DMX 0% See Figure 6.
Figure 2.
Figure 4. Figure 5.
Figure 3.
FIXTUREW WB BG G
ELV or MLV Phase Cut Dimming
FIXTUREW WB B
O OG G
Lutron® 3-Wire
FIXTUREWWBB
PPPP
GG
Lutron® EcoSystem®
OTHER CONTROLS FOR USE WITHBLU Bluetooth Low Energy Control Module DS101/2
WZIG ZigBee Wireless Control Module DS101/2
WENO EnOcean Wireless Control Module DS101/2
ENL Enlightened Control Module DS101/2
MOT Integral motion sensor. Includes dwell time, sensitivity and high/low light level settings. DS101/2
PHO Integral photo sensor. Includes dwell time, sensitivity and high/low light level settings. DS101/2
FIXTUREWBG
DALI
DALI CONTROL
SOME OPTIONS NOT AVAILABLE ON ALL FIXTURES, CONSULT SPECIFICATION SHEETS. SEE INDIVIDUAL SPECIFICATION SHEETS OR CONSULT FACTORY FOR ADDITIONAL INFORMATION.
Figure 1.
FIXTUREWWBB
GrGrPP
GG
0-10V Dimming
LED DIMMING OPTIONS
Figure 6.
FIXTUREWBG
DMX
DMX CONTROL