22 LED ALUMINUM MID-BAY - Spec Light Max/ALDDH22LEDG… · • 994 JEFFERSON STREET, FALL RIVER, MA...
Transcript of 22 LED ALUMINUM MID-BAY - Spec Light Max/ALDDH22LEDG… · • 994 JEFFERSON STREET, FALL RIVER, MA...
5YEAR
WARRANTY
1701
WWW.SPECLIGHT.COM • 994 JEFFERSON STREET, FALL RIVER, MA 02721 • 508.678.2303 FAX 508.678.2260
CAT. NO.:
PROJECT: TYPE:Dimensions and values shown are nominal. Spectrum Lighting continually works to improve products and reserves the right to make changes which may alter the performance or appearance of products.
ALDDH22LEDGV APPLICATION
Lumen Series Performance Pendant for low, mid-bay and hi-bay applications.
FEATURES
Domed Fixture Housing (DDH) features a contemporary design and is easy to maintain.
Single-stage optical system for smooth light distribution. 27K, 30K, 35K, 40K and
50K available. 85 CRI minimum. Consult factory for high CRI or special applications.
LED module and driver designed for ease of maintenance and replacement. Posi-lock
reflector retention ring will absorb shocks and impact. Optional safety cable. Variety
of optical lenses and mounting methods.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines.
A wide variety of standard and custom finishes are available. All exposed materials
are chromate pretreated to resist corrosion. Reflectors finished matte white inside.
ELECTRONICS
GV LED system features high brightness white Samsung LED’s. 3 step MacAdam
Ellipse binning. Standard CRI: 85+. Higher CRI, R9 and custom LED configurations are
available; consult factory. Variety of electronic 120V/277V and dimming drivers.
CONSTRUCTION
Spun aluminum housing and reflector with die cast aluminum heat sink and mounting hub.
CODE COMPLIANCE
ARRA Compliant. ETL listed for damp locations. Manufactured and tested to UL
Standards No. 1598/8750.
GV SERIES / 18000 LUMENS 22" LED ALUMINUM MID-BAY
EXAMPLE:ALDDH22LEDGV110L27KEXHM36/AL22/BC22CNFR/PT
SERIES LUMENS1 CCT DRIVER / DIMMING3 OPTIONS4 MOUNTING5 REFLECTOR DIFFUSER OPTIONS FINISH9
ALDDH22LEDGV 110L 150L 180L
11000 Lm15000 Lm18000 Lm
27K30K35K40K50K
2700K3000K3500K4000K5000K
EX
DS10X
DO10X
Electronic Driver, 120V/277V10% 0-10V Dimming, 120V/277V1% 0-10V Dimming, 120V/277V
FS2CIR3CIRE347
Fusing2 Circuit3 Circuit347V DimmingDriver
HM6
PM6
CD6
SC1HC
P7
NM2NM3
Hang Straight Rigid Pendant Cord / Cable MountSafety CableHook and Cord Plug ½" Hub¾" Hub
AL22
FCI
SC2
22" AluminumFixture Color InsideSafety Cable
MOUNTING LENS MW10 MB10 PT10 TWTB
MTBZ
OBCHGHACSNBR
ANCO CC
Matte White Matte Black Platinum Textured WhiteTextured BlackTextured SilverBronzeOil Rubbed BronzeCharcoalGraphiteChampagne Sun GoldBrecchia Rust Anodic Natural Copper Metallic Custom Color
DR228 22" Spun Door
CNFR
CNDL
WO90
PP
PC
WAG22
Conical Lens FrostedConical Lens Drop LensWhite Optical AcrylicPrismatic PolycarbonateClear Polycarbonate22" Wire Guard
EMERGENCY BATTERY OPTIONS
EMCP7W
EMRM7WEMEN7W
EMLN7W
7W Canopy Mounted EM7W Remote EM 7W Remote with Enclosure7W In-Line EM (For Pendants)
Fixture Weight: 18.0 lbs
NOTES:1 Nominal Source Lumens at 3500K 2 Nominal Delivered Lumens at 4000K with AL22, No Lens 3 Contact Factory for Additional Options 4 See Product Options Page For Details 5 See Mounting Page for Details on Components and Finishes 6 Specify Length in Inches: See Mounting Page for Available Lengths 7 Specify Plug Style 8 Same Finish as Housing 9 Contact Factory for Special Finishes 10 Standard Finishes
WATTAGE / LUMENS DATA
PART NUMBER
PREVIOUS PART NUMBER EXAMPLE
SOURCE LUMENS1
DELIVERED LUMENS2
SYSTEM WATTS LPW
ALDDH22LEDGV110L ALDDH22LEDGV112W 11000 8897 77 115.54
ALDDH22LEDGV150L ALDDH22LEDGV133W 15000 11997 102 117.61
ALDDH22LEDGV180L ALDDH22LEDGV144W 18000 14409 116 124.21
A B C D E
20.9530.9 mm
12.2309.9 mm
8.7221.0 mm
7.5 190.5 mm
22.4 569.0 mm
MOUNTING HUB MACHINED/SPUN ALUMINUM HOUSING
.063 SPUN ALUMINUM REFLECTOR
DRIVER/LED ACCESS
OPTIONAL BOTTOM LENSE
A
B
C
D
WWW.SPECLIGHT.COM • 994 JEFFERSON STREET, FALL RIVER, MA 02721 • 508.678.2303 FAX 508.678.2260
CAT. NO.:
PROJECT: TYPE:Dimensions shown are nominal. Spectrum Lighting is continually improving products and reserves the right to make changes that will not alter performance or appearance with or without written notice.
1702
SOME OPTIONS NOT AVAILABLE ON ALL FIXTURES, CONSULT SPECIFICATION SHEETS. SEE INDIVIDUAL SPECIFICATION SHEETS OR CONSULT FACTORY FOR ADDITIONAL INFORMATION.NOTE: THIS IS TYPICAL OF LUMEN MAX SPECIFICATION FOR PENDANT MOUNTING. INDIVIDUAL FIXTURES OR PROJECTS MAY HAVE SPECIALIZED REQUIREMENTS.
LUMEN MAX MOUNTING OPTIONS
HCPHOOK CORD & PLUG
FOR INDEPENDENT MOUNTING
ORDER: HCP (Plug)
MOUNTING TYPES
45° SWIVEL 1/2" STEM - 1/4" IP45° SWIVEL 1/2" STEM - 3/8" NPT RIGID 1/2" STEM - 3/8" NPT SJ CORD WITH 1/16 SS CABLE
45°
FIELDCUTABLE
45° 0°
ADJUST AND LOCKS
HM*HANG STRAIGHT
HMAT*HANG STRAIGHT ALL THREAD
PM*RIDGID PENDANT MOUNT
CDCORD / CABLE MOUNT
ORDER: HM (Length)
SPECIFY LENGTH:
HM3 - 3"
HM6 - 6"
HM12 - 12"
HM18 - 18"
HMLC(XX)Custom Length
(Specify in Inches)
HM24 - 24"
HM36 - 36"
HM48 - 48"
HM72 - 72"
ORDER: HMAT (Length)
SPECIFY LENGTH:
HMAT12 - 12"
HMAT24 - 24"
HMAT36 - 36"
HMAT48 - 48"
HMAT72 - 72"
HMATLC(XX)Custom Length
(Specify in Inches)
PM24 - 24"
PM36 - 36"
PM48 - 48"
PM72 - 72"
ORDER: PM (Length)
SPECIFY LENGTH:
PM3 - 3"
PM6 - 6"
PM12 - 12"
PM18 - 18"
PMLLC(XX)Custom Length
(Specify in Inches)
ORDER: CD (Length)
SPECIFY LENGTH:
CD36 - 36"
CD72 - 72" CD144 - 144"
CDLC(XX)Custom Length
(Specify in Inches)
SPECIFY PLUG:120v L120277V L27
FIELD CUT THREADED PIPE TO LENGTH NEEDED
SLIP "PIPE COVER" OVER THREADED PIPE
CUT "PIPE COVER 3/4" SHORTERTHAN THREADED PIPE
*MAXIMUM ONE PIECE STEM LENGTH IS 72". LONGER LENGTHS ARE POSSIBLE USING MULTIPLE STEMS AND COUPLERS.
ADDITIONSFS - FUSING
Slow blow type fuse protects fixture against voltage surges. Factory installed.
surgeprotector
LSP10 - SM - SURGE PROTECTOR
Surge protector absorbs transient electrical spikes and protects fixtures and electronics 120/277v. Re-sets after surge. Factory Installed.
SAFETY CABLE OPTIONSSC1 - SAFETY CABLE SC2 - SAFETY CABLE
1/16" stainless steel safety cable for added support. Standard kit is 18" and double barrel locks are provided. Approved for California seismic requirements. Rated at 50 lbs.
1/16" Stainless steel cable holds door to fixture
MOUNTING FINISH Standard Canopy / Stem or Cord mounting finish is matte white. Black fixtures receive
matte black mounting finish, silver fixture receive silver mounting finish. Custom colors and fixture color canopy and stem are available upon request.
MOUNTING COMPONENTS FINISHFIXTURE COLOR CANOPY / STEM / CORD COLOR
Matte White, Textured White Matte White
Matte Black, Textured Black, Bronze, Oil Rubbed Bronze Matte Black
Platinum, Textured Silver, Silver Silver
All Others Matte White
Custom Color Canopy / Stem Same Color as Fixture
EMERGENCY BATTERY OPTIONS REMOTE EMERGENCY BATTERY OPTIONS
Ø 13.75
EMCP7W - LARGE DRIVER CANOPY FOR 7W EMERGENCY BATTERY (FOR ALL CEILING MOUNT TYPES)
2.5
EM WATTAGE A B C
EMRM5W 1.5 9.0 9.5
EMRM7W* 1.3 12.6 13.0
EMRM12W 1.3 12.8 13.3
EMRM7W - REMOTE EMERGENCY BATTERY (UP TO 12W, 50’ MAX)
A
B
C
ENCLOSURE A B C
EMEN5W 2.0 17.0 6.2
EMEN7W* 2.0 17.0 6.2
EMEN12W 2.0 17.0 6.2
A
B
C
EMLN7W - 7W IN-LINE EMERGENCY BALLAST (FOR HM, HMAT, AND PM OPTIONS)
16.2412.7 mm
4.0101.6 mm
EMEN7W - REMOTE EMERGENCY BATTERY WITH ENCLOSURE (UP TO 12W, 50' MAX)
*STANDARD *STANDARD
WWW.SPECLIGHT.COM • 994 JEFFERSON STREET, FALL RIVER, MA 02721 • 508.678.2303 FAX 508.678.2260
CAT. NO.:
PROJECT: TYPE:Dimensions shown are nominal. Spectrum Lighting is continually improving products and reserves the right to make changes that will not alter performance or appearance with or without written notice.
1702
OTHER CONTROLS FOR USE WITHWZIG Wireless control module to communicate with ZigBee wireless controls. DS101/2
BLU Wireless control module Bluetooth low energy. DS101/2
MOT Integral motion sensor. Includes dwell time, sensitivity and high/low light level settings. DS101/2
PHO Integral photo sensor. Includes dwell time, sensitivity and high/low light level settings. DS101/2
Dimming systems not available on all fixtures, Consult individual specification sheets for availability.
DIMMING TYPE SYSTEM DIMS TO WIRINGDS2W1 120v Phase Cut Dimming ELV or MLV 1% See Figure 1.
DEO11/2 120v/277v 0-10v Low Voltage Dimming 0-10v .01% See Figure 2.
DO101/2 120v/277v 0-10v Low Voltage Dimming 0-10v 1% See Figure 2.
DS101/2 120v/277v 0-10v Low Voltage Dimming 0-10v 10% See Figure 2.
DLTE1 120v Lutron® 2-Wire Phase Cut Dimming Lutron® Phase Cut 1% See Figure 2.
DL33X 120v/277v Lutron® 3-Wire Dimming Lutron® 3-Wire 1% See Figure 2.
DL3EX 120v/277v Lutron® Ecosystem® Dimming Lutron® Ecosystem® 1% See Figure 2.
LDE1 120v/277v Lutron® Ecosystem® Dimming, Fades to Black Lutron® Ecosystem® 1% See Figure 3.
LDE5 120v/277v Lutron® Ecosystem® Dimming, Fades to Black Lutron® Ecosystem® 5% See Figure 4.
DALI 120v/277v DALI Digital Addressable Lighting Interface DALI 10% See Figure 5.
DMX 120v/277v DMX Addressable Lighting Interface DMX 10% See Figure 6.
Figure 1.
FIXTUREW WB BG G
2 Wire Phase Dimming
Figure 5.
FIXTUREWBG
DALI
DALI CONTROL
DIMMING OPTIONS
SOME OPTIONS NOT AVAILABLE ON ALL FIXTURES, CONSULT SPECIFICATION SHEETS.SEE INDIVIDUAL SPECIFICATION SHEETS OR CONSULT FACTORY FOR ADDITIONAL INFORMATION.
Figure 5.
FIXTUREWBG
DMX
DMX CONTROL
Figure 2.
WB
GrPG
WB
GrPG
FIXTURE
0-10v Dimming
Figure 3.
WBOG
WBOG
FIXTURE
Lutron® Hi Lume
Figure 4.
WBPPG
WBPPG
FIXTURE
Lutron® EcoSystem®
WWW.SPECLIGHT.COM • 994 JEFFERSON STREET, FALL RIVER, MA 02721 • 508.678.2303 FAX 508.678.2260 1702
Spectrum offers several lens options for visual comfort, light distribution and interior protection. 2 lens retaining options: BAND CLAMP: (BC12, BC16, BC22) and DOOR: (DR12, DR16, DR22)
DIFFUSER OPTIONS
REFRACTOR, GUARD AND LENS OPTIONS
POLY: Polycarbonate Refractor Option Available. Specify As: PR (12", 16", 22") POLY
REFRACTOR OPTIONS
FACE WIRE GUARDS (WAG 12”, 16”, 22”)Guard Covers opening of reflector. May be combined with flat lenses OA, FO, PC, PP. Chrome Plated #14 ga wire.
HALF WIRE GUARD (HWG12”, 16”, 22”) Covers and protects opening of reflector and exterior. Chrome plated #14 ga wire.
REFLECTOR SHIELD (RS 12”, 16”, 22”) Reflector Shield used on PR refractor minimizes side light out-put while allowing up light (30%) Finished to match fixture.
GUARD / SHIELD OPTIONS
AL - Aluminum ReflectorOP - Opal White Acrylic RefractorPR - Clear Prismatic Acrylic Refractor
SC2 - SAFETY CABLE (Optional 1/16" Stainless steel cable holds door to fixture.)
RED PEARL GREENMETALIZED BLUE PEARL PINKGRANITE GREEN PEARL BLUEAMBER PEARL
DF - Diffuse Prismatic Acrylic Refractor
COLOR: Color Refractor Options Available. Specify As: PR (12", 16", 22") (COLOR)
BC (12", 16", 22") CN DR (12", 16", 22") CN
CN - CONICAL LENS (Distributes light horizontally with clear spread pattern for maximum efficiency.)
BC (12", 16", 22") FO DR (12", 16", 22") FO
FO - FLAT OPTICAL (Matte White Optical Lens for LED. No LED image for maximum efficiency.)
BC (12", 16", 22") DL DR (12", 16", 22") DL
DL - DROP LENS (Drop Prismatic Lens for maximum brightness and widest distribution.)
BC (12", 16", 22") PP DR (12", 16", 22") PP
PP - PRISMATIC POLYCARBONATE (Classic Prismatic Poly Lens.)
OA - OPAL ACRYLIC (Matte White Acrylic Lens.)
BC (12", 16", 22") OA
BC (12", 16", 22") PC DR (12", 16", 22") PP
PC - CLEAR POLYCARBONATE (Primarily used as safety overlay for FO, PP, OA lens.)
BC (12", 16", 22") CNFR DR (12”, 16”, 22”) CNFR
CNFR - CONICAL FROSTED LENS (Distributes light horizontally with light etch to diffuse output.)
DR (12", 16", 22") OA
We offer traditional Flat Wire Guards (WAG), Half-Fixture Wire Guards (HWG) and Reflector Shields (RS). LED Fixtures typically do not require wireguards.
SOME OPTIONS NOT AVAILABLE ON ALL FIXTURES, CONSULT SPECIFICATION SHEETS. SEE INDIVIDUAL SPECIFICATION SHEETS OR CONSULT FACTORY FOR ADDITIONAL INFORMATION.
WWW.SPECLIGHT.COM • 994 JEFFERSON STREET, FALL RIVER, MA 02721 • 508.678.2303 FAX 508.678.2260
CAT. NO.:
PROJECT: TYPE:Dimensions shown are nominal. Spectrum Lighting is continually improving products and reserves the right to make changes that will not alter performance or appearance with or without written notice.
1701
color options
POWDER COAT PAINT FINISHESLUMEN MAX
ANanodic natural
ACanodic champagne
BZbronze
BRrust
SNsun gold
OBoil rubbed bronze
CHcharcoal
GHgraphite
COcopper metallic
TWtextured white
TBtextured black
PTplatinum
MTtextured silver
MBmatte black
MWmatte white
SOME OPTIONS NOT AVAILABLE ON ALL FIXTURES, CONSULT SPECIFICATION SHEETS.NOTE: NO PRINTED IMAGE CAN EQUAL THE EXACT COLOR OF FINISH ON METAL. SEE INDIVIDUAL SPECIFICATION SHEETS OR CONSULT FACTORY FOR ADDITIONAL INFORMATION.
COMMONLY PRODUCED STANDARD FINISHES - AVAILABLE FOR QUICK SHIP
OTHER AVAILABLE STANDARD FINISHES
NON-STANDARD OPTIONAL FINISHES
ASanodic sapphire
AZanodic bronze
AKanodic black
AManodic malachite
CMcaramel
TQturquoise
LGlime green
SFsea foam
EGevergreen
VEverde green
BLblue streak
RDred baron
ORorange
PLpurple
PGpub green
PKpink
ALalmond
AYaero yellow
SIsilver