REBAR CUTTER RAPID CUT 16 - allcongroup.com.au · RapidCut 16 Pneumatic Rebar Cutter The RapidCut...
1
P: 1300 255 266 E: [email protected] W: allcongroup.com.au Model RCUT16 Max Cutting Range 16mm (70kg/mm2) Cutting Velocity 10 Cuts Per Minute Air Pressure Required 90-120 PSI (6-8.5 Bar) Air Consumption: Approx 48L / Cut at 7 Bar Replacement Jaws: 1660J Weight 18kg Dimensions (LxWxH) 1164mm x 264mm x 264mm REBAR CUTTER RAPID CUT 16 RapidCut 16 Pneumatic Rebar Cutter The RapidCut 16 is ideal for cutting rebar and mesh up to 16mm in thickness. The Pneumatic cutter has the same jaw action as standard bolt cutters and very simple to use and handle. They require minimal maintenance, reducing down time and making them a very cost-effective tool in demanding applications. The flat profile of the jaw means mesh can be cut while it is flat on the ground. These units are best suited to precast yards and mesh processing facilities.
Transcript of REBAR CUTTER RAPID CUT 16 - allcongroup.com.au · RapidCut 16 Pneumatic Rebar Cutter The RapidCut...
P: 1300 255 266E: [email protected]: allcongroup.com.au
Model RCUT16
Max Cutting Range 16mm (70kg/mm2)Cutting Velocity 10 Cuts Per MinuteAir Pressure Required 90-120 PSI (6-8.5 Bar)Air Consumption: Approx 48L / Cut at 7 BarReplacement Jaws: 1660JWeight 18kgDimensions (LxWxH) 1164mm x 264mm x 264mm
REBAR CUTTERRAPID CUT 16
RapidCut 16 Pneumatic Rebar Cutter
The RapidCut 16 is ideal for cutting rebar and mesh up to 16mm in thickness. The Pneumatic cutter has the same jaw action as standard bolt cutters and very simple to use and handle. They require minimal maintenance, reducing down time and making them a very cost-effective tool in demanding applications. The flat profile of the jaw means mesh can be cut while it is flat on the ground. These units are best suited to precast yards and mesh processing facilities.
