Really toughunder pressureCeramiC industrial flooring systems for the automotive industryand Workshops

02

ACCESSoRY TILESinternal corners

external corners

internal right angle

external right angle stair tread tile

Bullnose

stair treadWall top covering

sit-on skirting

strip tile

Bullnose

Coved base skirting

Security: Argelith ceramic tiles meet the key requirements in the high load areas of industry and commercial. And they always exceed the required standards!

Slip resistantArgelith meets the requirements

for all areas of application.(R10-R13 and V04-V10)

Frost resistantArgelith tiles do not crack, even in low temperatures

and at thermal shocks

Ecologically soundonly natural materials with no

chemical additives are used

Chemical resistantArgelith tiles are unglazed and

oil, acid and alkali resistant

Maximum load bearingArgelith products are inher-

ently elastic and can withstand high pressure

Beige 300 arkona white 310 Cream yellow 410sand yellow 400

CoLouRS and CoLouR CodES

Technical values: tested according to dIN EN ISo 10545 Section 1-16

argelith ceramic tiles comply in all tested properties with the requirements of the material norm din en 14411, section g, group B i and ugl.

example: requirement according hexalith 108 x 125 x 18 mm to din en 14411 Argelith Bodenkeramik

modulus of rupture n/mm2 and min. 35 n/mm2 ca. 73,3 ± 4,1 average breaking strength in n ca. 15289 ± 911

resistance against deep wear max. 175 mm3 ca. 100 mm3

Water absorption in weight - % max. 0,5 % < 0,07 %

the above values are an extract from a test certificate. We will happily send you a test certificate for your desired material.

SurfacesCeramic Tiles:

Smoothr 9 - r 10 - r 11

Securityr 12

Nopped profiler 12/ v 06r 13/ v 08

light grey 200 dark grey 210 anthracite 230titanium grey 220

tina 611

tessa 613 atlanta 250 grey porphyr 251

katerina 602 gitta 610Cora 600

freia 612

Blue-red flamed 150Brick red 110

sandstorm 751galaxyit 730 Jade green 760

C E R A M I C T I L E S

03

Security: Argelith ceramic tiles meet the key requirements in the high load areas of industry and commercial. And they always exceed the required standards!

04

We are, walked upon…From the showroom to the workshop!even the harshest treatment of our products in workshops or showrooms will not affect

argeltih ceramic tiles. the automotive industry appreciates and is familiar with the durability,

easy cleaning and maintenance of our products.

Turnkey projects:thick tiles are an important factor for all environments, where high dynamic, static and impact

loads are expected. this is where we are market leaders and supply workshops worldwide.

for the showroom environments where the floors are not subjected to high loads 12-15 mm

thickness is sufficient and cost effective.

our product is your advantage: highest quality argelith ceramic tiles are seen from the

workshop to the showroom.

The thickness is our strength!floors are continuously abused – for that reason workshop floors have to be safe! safety in

a workshop environment means protection against mechanical damages, chemicals, slipping,

abrasion, moisture and dirt. depending on the requirement argelith has products of 12, 15

and 18 mm thickness – in various sizes, colours and surfaces. it doesn’t matter what

decision you make when you expect high point loading and longevity – with argelith you

always make the right one!

CLASSIC SERIES – Anthracite / Light grey

*Colour aberration with original product may be caused by printing

highest mechanical loads possible

Chemical resistance is given

Can be steam jet cleaned without negative impact

thermal resistant even over 100° C

repairs can be made even to the smallest areas invisibly

By using thick tiles a deep joint is achieved

resistant to abrasion

heavy machines and production facilities can stand safely and reliable on an argelith floor

4

4

4

4

4

4

4

4

Using Thick Tiles: Advantages

*excerpt from our product range

Size mm Surface Thickness Slip Resistance

198 x 98 non profiled 15, 18 R 10, R 11

Security 15, 18 R 12

Nopped 15, 18 R 12 - V 06

198 x 198 non profiled 15, 18 R 10, R 11

Security 15, 18 R 12

Nopped 15, 18 R 12 - V 06

05

06

What is Argelith famous for? argelith ceramic tiles are extremely dense as a result of our special firing process. our products

therefore achieve best test results. minimized water absorption of less than 0,1 % is achieved

without glaze or impregnation. this enables our product to be stain resistant with easy care

characteristics for years to come, reason enough to plan your projects with argelith tiles.

argelith ceramic tiles fit perfectly into new concept dealerships including important areas like

service reception. as an alternative we can also offer 298 x 298 mm format tiles in super strong

15 mm thickness. these tiles are ideal to create a different look in heavily loaded areas.

Turnkey projects:argelith has extended its product range with our new size 398 x 198 mm in 12 and 15 mm

thickness.

Water absorption < 0,1 %

non-glazed

no impregnation

density of the product from „head to toe“

easy to clean

Cost effective

4

4

4

4

4

4

Ideal solution for areas with high moisture content

all prodcuts itemised here are manufactured conforming to Ce in argelith Company

CLASSIC SERIES – Galaxyit / Sandstorm

*Colour aberration with original product may be caused by printing

*excerpt from our product range

Size mm Thickness Slip Resistance

298 x 298 12, 15 R 10

398 x 198 12, 15 R 10

07

A classic under the CarsCar types come and go, but one classic remains, ceramic tiles from argelith Bodenkeramik.

our product has seen nearly all automotive brands from below.

as time passes, each car, sooner or later has to get acquainted with the workshop, where

it meets our argelith ceramic tiles. our tiles are considered an important component of the

workshop environment. in the automotive industry, it is a well known fact that argelith ceramic

tiles are resistant to oil, acids and alkali, and furthermore have a high point load capacity. our

tiles, available from 16 mm thickness are suitable even for heavy duty equipment like trucks.

for special applications we also manufacture super heavy duty tiles, ranging up to 30 mm

thickness. due to the manufacturing process in tunnel kilns, our tiles become very dense.

this special firing process enables us to produce these thick ceramic tiles for clients with

special requirements. argelith ceramic tiles are durable and achieve extraordinary longevity,

although continuously abused by every day use. this is what makes argelith a classic in its

own right under the cars.

recommended use: Brick red / Blue-red flamed

*Colour aberration with original product may be caused by printing

*excerpt from our product range

Size mm Surface Thickness Slip Resistance

198 x 98 non profiled 16, 20 R 10, R 11

Security 16, 20 R 12

Nopped 16, 20 R 12 - V 06

240 x 115 non profiled 16, 20 R 10, R 11

Nopped 16, 20 R 12 - V 06

08

09

10

K E R A S I G

Material requirementswhole tiles

linear m

Material requirements

half tileslinear mFormat Thickness

14 cm 15, 18 8

20 cm 15, 18 10

28 cm 15, 18 4 5

Material requirements table

Kerasig®

possible installation width patterns

10,5 cm 21 cm21 cm

ca. 14 cm ca. 28 cm21 cm21 cmca. 20 cm

New: kerasig in 15 mm thickness

with the slip resistence

r 12 v 06 and with a band

size of 20 cm!

11

15 mm tile on concrete slab:fracture of slab and tile at 37.800 n (average value)

System with thin tile (8 mm) System with thick tile (20 mm)

20 mm tile on concrete slabfracture of slab and tile at 45.200 n (average value)

source: säurefliesner-vereinigung e.v.

4

4

4

4

the test clearly shows: The thicker the tile, the greater the load required to cause fractures.

Load distribution of a tile depends on its thickness. As tile thickness increases, load distribution is also greater, resulting in increased mechanical resistance. Ceramic tiles work to distribute the load into the substructure. This load-distribution effect is greater when thicker tiles are used. This should be taken into account during selection and when determining the expected mechanical load.

tests were carried out with a load increase of approximately 1.000 n (corresponds to 100 kg)

per second.

the break occured as the force decreased, bringing along with it visible damage to the test pieces.

P R o d u C T f E A T u R E S

stoneware manufactured by argelith conforms to

Ce regulations.

System tested Breaking load in NLoad distribution 20 x 20 mm Single values Average value

Mortar (no tile) 19.000150 x 150 x 40 20.500 20.500 22.000tile 28.000100 x 100 x 8 mm 30.000 28.000on mortar 26.000150 x 150 x 40 mm

tile 34.000100 x 100 x 12 mm 35.500 34.200on mortar 33.000150 x 150 x 40 mm

tile 37.000100 x 100 x 15 mm 37.500 37.800on mortar 39.000150 x 150 x 40 mm

tile 46.000100 x 100 x 20 mm 45.500 45.200on mortar 44.000150 x 150 x 40 mm

12

„Load distribution of tiles and slabs“

13

P R o d u C T f E A T u R E S

14

argelith has proven to be the right choice for industrial floors requiring resistance to thermal,

chemical mechanical and other stresses. as the graph shows argelith keeps you on the

safe side. argelith tiles meet and exceed both requirements and norms for industrial floors.

Always stay on safe ground

Slip resistantArgelith meets the requirements

for all areas of application.(R10-R13 and V04-V10)

Chemical resistantArgelith tiles are unglazed and

oil, acid and alkali resistant

Ecologically soundonly natural materials with no

chemical additives are used

Frost resistantArgelith tiles do not crack, even in low temperatures

and at thermal shocks

Maximum load bearingArgelith products are inherently

elastic and can withstand high pressure

Security: stoneware and clinker tiles meet the key requirements in the high load areas of industry

and commerce. and they always exceed the required standards!

Protect your people and the environmentit is important, as well as possibly legally required, that the environment should not be dama-

ged. Whether exposed to oils, fats, alkalis, acids or other dangerous substances a floor of

argelith tiles ensures that the required standards can be met!

Technical values: tested according to dIN EN ISo 10545 Section 1-16

argelith fine porcelain stoneware tiles comply in all tested properties with the re-

quirements of the material norm din en 14411, section g, group B i and ugl. example: requirement according sechseck 108 x 125 x 18 mm to din en 14411 Argelith Bodenkeramik

modulus of rupture n/mm2 and min. 35 n/mm2 ca. 73,3 ± 4,1 average breaking strength in n ca. 15289 ± 911

resistance against deep wear max. 175 mm3 ca. 100 mm3

Water absorption in weight - % max. 0,5 % < 0,05 %STON

EWAR

E

the above values are an extract from a test certificate. We will happily send you a test certificate for your desired material.

Surfaces

Smoothr 9 - r 10 - r 11

Securityr 12

Nopped/Starr 12/ v 06r 13/ v 08

** exception: fluoridic acid (hf) and its compounds

Technical values according to DIN 18158 Argelith clinker tiles

tested characteristic requirement in din Argelith is better!

modulus of rupture min. 20 n/mm2 38,1 n/mm2

Compressive strength min. 150 n/ mm2 252 n/ mm2

Water absorption max. 3 % fulfilled

acid resistance required fulfilled**

alkali resistance required fulfilled**

frost resistance required fulfilled

resistance against wear by grinding max. 10 cm2 5,7 cm2

size consistency ±1,5% fulfilled

Coefficient of linear thermal expansion 5-8 x 10-6k-1 6,7 x 10-6k-1

thermal shock resistance required fulfilled

CLIN

KER

TILE

S

Surfaces

Smoothr 10 - r 11

Securityr 12

Nopped profiler 12/ v 06

15

Active Clean

Active Clean maintenance/shop fl oor cleaner for fi ne stoneware/porcelain, tiles and vitrifi ed and semi-vitrifi ed ceramic fl ooring: It removes stubborn old and new stains, the heaviest polymer soiling, wax and care product residue and much more.

Cement Haze Remover

The cement haze remover and decalcifi er for acid-resistant substrates, heavy building dirt and lime and jointing material residue (basic and post-construction cleaning).

10 / 20 / 200 liter

10 / 20 / 200 liter

designation Item number

Cement haze remover 10 l 00 99 19 00 400

Cement haze remover 20 l 00 99 19 00 401

Cement haze remover 200 l 00 99 19 00 402

designation Item number

maintenance/shop fl oor cleaner 10 l 00 99 19 00 410

maintenance/shop fl oor cleaner 20 l 00 99 19 00 411

maintenance/shop fl oor cleaner 200 l 00 99 19 00 412

Clinker Oil

a special product for clinker tiles to penetrate them and to treat them. it contains high-quality oils and oil-like substances and is almost odorless and ready to use. Clinker oil soaks into the pores, strengthens the natural structure, brightens the color and makes the surfaces less susceptible to soiling. 10 / 20 / 200 liter

designation Item numberClinker oil 10 l 00 99 19 00 420

Clinker oil 20 l 00 99 19 00 421

Clinker oil 200 l 00 99 19 00 422

Epoxy resin remover

it removes stubborn epoxy resin and jointing materials as well as polymer and wax coatings, for instance, after processing. It may be used for fi ne stoneware/porcelain tiles, fully vitrifi ed and semi-vitrifi ed ceramic fl oorings and glass mosaics and in indoor and outdoor areas.

Power Clean

It removes extremely soiled epoxy resin fi lm, wax and stubborn polymer coatings and the heaviest dirt on tiles, fi ne stoneware and glass mosaics and can be used in indoor and outdoor areas.

Rubber Remover

This is for the cleaning of solvent-resistant materials and fl oor coverings in the industrial and manufacturing sector. it eliminates heel marks and rubber abrasion and dissolves oily and greasy stains.

10 / 20 / 200 liter

designation Item numberepoxy resin remover 10 l 00 99 19 00 430

epoxy resin remover 20 l 00 99 19 00 431

epoxy resin remover 200 l 00 99 19 00 432

designation Item numberproblem solver 10 l 00 99 19 00 440

problem solver 20 l 00 99 19 00 441

problem solver 200 l 00 99 19 00 442

designation Item numberrubber remover 5 l 00 99 19 00 450

rubber remover 10 l 00 99 19 00 451

rubber remover 20 l 00 99 19 00 452

10 / 20 / 200 liter

5 / 10 / 20 liter

The Cleaning Range for your Floor Coverings

Argelith Bodenkeramik H. Bitter GmbH schledehauser str. 133 · 49152 Bad essen · germanyphone +49 (0) 54 72 / 40 20 · fax +49 (0) 54 72 / 15 12 info@argelith.com · www.argelith.com gi

/gB/

0620

14