Instruction - reading hardware number and software version

Brand VAG Group

Model DSG6 DQ250 02E

Product TCU

Version 1.1

Document

number

P0051.03.02

Instruction reading soft- and hardwareversion VAG DSG6 02E 2

Example required data:

Reading hardware number:

The hardware number is circled in the picture below:

Exampel required data:

Part number: 02E300041G

HW number:

02E927770L

149 0624

SW number: C06R4_Q03E_BMG1_AMPV_19I_TDI

Instruction reading soft- and hardwareversion VAG DSG6 02E 3

Reading software number with VCDS

Step Action

1. Connect the OBD readout connector from VCDS to the OBD socket of the vehicle and turn the

ignition on.

2. Start VCDS.

3. Click on “Select”

4. Click on “Common” and then “02 Auto Trans”

5. Note the “VAG Number”, for example: 02E 300 043 S

6. Note the “Component number”, for example: GSG DSG 070 1303

7. Click on “Meas. Blocks -08”

8. Go to “group 041”and note the code. For example: v0696L0302ea__getriebe_DSG_eQ6L

Circled in the picture below.

9. Please fill in the above data, together with the description of the complaint and error codes, on

your Remanufacture Order Form (ROF) and sent it together with the part to ACtronics.

Instruction reading soft- and hardwareversion VAG DSG6 02E 4

Reading software number with

VAS5051

Step Action

1. Connect the OBD readout connector from VAS5051 to the OBD socket of the vehicle and

turn the ignition on.

2. Start VAS5051.

3. Click on “Vehicle Self-Diagnosis”

4. Click on “Vehicle Self-Diagnosis” again

5. Click on “02 – Gearbox electronics”

6. Click on “011-Read data block”

7. Fill in group number “41”

8. Note the circled data.

Example:

• Part Number: 02E300041G

• Hardware number: 02E927770L 149 0624

• Software number: C06R4_Q03E_BMG1_AMPV_19I_TDI

Circled in the picture below.

9. Please fill in the above data, together with the description of the complaint and error

codes, on your Remanufacture Order Form (ROF) and sent it together with the part to

ACtronics.