RCLayout User note
description
Transcript of RCLayout User note
RCLayout User note
January 2013
Do product layout
Useful information
Access> http://rclayout.extranet.royalcanin.org
> RConnect (new RC Intranet)
> Sales Support Portal
> Windows ID user & Windows password
= RCAD accessAccess
Access
> You don’t have to wait!
> Your account is automatically created as soon as you go onto http://rclayout.web.rcad.net/
Advise > Have a mouse when using the website!
Let’s go!
> Click on OPEN > My layouts management
> F11 button to be in full screen (useful when small screen laptop)
> F11 button to desactivate full screen mode
To start from an existing project
> Search for an existing project > Select it in the list
> Double-click or click on OPEN
To start a project from zero
> Start a new project from zero
> Name your project > Start from zero (=Blank)
> Or start from a model
> Name the first stand of your project > Fill in the width in cm > Choose the range
> Fill in the height & the depth for the first level
To add a new level
> Click on the right button of your mouse > Click on Add level
To add a stand
> Use the tabs to navigate
> Click on Stand > Click on Add a stand
To put products on a level
> Select your range
> Select your format, hold the click & drag it onto the level
Label associated to the level
> The label gathers the main information of the level
> Remain = Space available on the level in cm
> -3cm is the maximum
Colour code when dragging the bags
> VERT = enough space to put the bag!
> ORANGE = still fine but close to the limit
> RED = not enough space
> 3 possible reasons:
- The bag goes too much onto another bag
-Not enough space remaining on the level (Remain < -3cm )
-The height is too short
To manage the level functionalities
> Click right on the level to access the functionalities
Add a new levelPut the bags to the rightPut the bags to the leftJustifyChange the width of the level and standChange the height & depth of the levelMove the level upMove the level downEmpty the level Delete the level
To duplicate a product
> Click on Ctrl & hold the click > Select the product with the left button of the mouse & hold the click to move the product
To select several products
> Draw a zone (here in blue). To do it, click on a point & hold the click to enlarge the zone.> You can move it or duplicate it (as for a product).
The storage area
> Storage area
Functionalities to manage a stand
> Click on Stand
> Functionalities linked to the management of a stand
Add a new stand in the
project
Empty the current stand
Delete the stand
Change stand width
Change the name of
the stand
Print stand 2D
view
Print stand
product list
> Functionalities linked to the management of a stand
Functionalities to manage a project
> Click on Project
> Functionalities linked to the management of the project
Save
Empty the whole project
Close the project
Print in 2D
Product list in pdf
Product list in Excel file
Save as
> Functionalities linked to the management of the project
3D view
> Click on 3D view
> View by default: ¾ view from the left
> Click anywhere on the 3D view, hold the click & then move your mouse to change the angle view
> Zoom or dezoom with the mouse scroll
> Print your 3D view
> Direct print
> Save the view as pdf
> Save the view as jpg
> Change the printing format
Workshop 1
Build this stand 1m33:
5 level: H:25cm D:70cm
4 level: H:25cm D:70cm
3rd level: H:36cm D:70cm
2nd level: H:36cm D:70cm
1st level: H:42cm D:70cm
Add a stand. 66cm wide.
6ème niveau: H:25cm P:70cm
5ème niveau: H:25cm P:70cm
4ème niveau: H:33cm P:70cm
3ème niveau: H:33cm P:70cm
2ème niveau: H:36cm P:70cm
1er niveau: H:36cm P:70cm
> Export the product list of the whole project in pdf
> Export the product list of the 1st stand in Excel
> Print this view