RCA Anti Sag

Product InformatIon 1Creating the Solution Together!

05/08

non - reduced WPG acid value color HEW volatile Viscosity Solvent Viscosity (lbs/gal) (on nv) Gardner / (on nv) features aPHa

I. SpeCIalTy ReSInS

a. mIcroGElSSetalux 10-1302 50% 100 - 300 cps MAK/ VM&P/ na 7.7 5 max na na OH functional acrylic microgel; low viscosity with excellent yellowing n-BuAc resistance and aluminum orientation; non-HAPs

Setalux 10-1310 50% 0.04 - 0.27 aliphatic na 7.6 3 max na 350 OH functional acrylic microgel; rheology control for base coat and single Pa.s. hydrocarbon/ stage; EU number - Setalux 1850 SA-50; non-HAPs n-BuOH

B. Sca modIfIEd rESInSSetal 10-1600 51% 0.6-1.2 / A-100/ xyl/ PGME na 8.3 9 max na 650 opaque SCA modified polyester; (4% SCA on solution), excellent sag 8-28 Pa.s. amine resistance, flow and stabilization, good CAB compatibility, for bake CC, air dry or bake pigmented systems; EU number - Setal 90173 SS-50 Setalux 10-1601 60% 1.5 - 3.0 / A-100/ n-BuAc na 8.1 4 max na 600 opaque SCA modified thermoset acrylic; (3.7% SCA on solution); excellent 10-15 Pa.s. amine sag resistance, flow and stabilization, for bake CC, air dry or bake pigmented systems; EU number - Setalux 91756 VS-60; low HAPs

Setalux 10-1701 60% 3.5 - 10.0 Pa.s. A-100/ n-BuOH na 8.3 8 max na 500 opaque SCA modified thermoset acrylic; (4% SCA on solution), for bake amine CC at lower temperature, air dry or bake pigmented systems; EU number - Setalux 71760 VB-60; low HAPs

Setalux 10-1803 64% 600 - 1500 n-butyl acetate na 8.7 2 max na 300 transparent SCA; to increase sag resistance of air dry or low-bake amine clearcoats and single-stage coatings

Setal 10-1821 64% 0.45 - 0.75/ n-BuAc/ xyl na 8.8 6 max na 300 transparent SCA modified polyester; (2.5% SCA on solution), good rheology 3 - 8 Pa.s. amine control, ambient cure systems, low bake; EU number - Setal 82166 SS-64

c. nco-frEE rESInSKetac primerSetalux 10-1440 66% D - G xyl/ n-BuOH/ na 8.0 155 - 165 10 max 240 amine ketimine crosslinking resin; for use in 2.8 and 3.5 VOC Ketac primer active MIBK amine eq. wt. systems, extremely fast dry, excellent adhesion and build

Setalux 17-1450 65% Z2 - Z4 MAK H - L @ 50% 8.3 2 max 200 max 1150 ac.ac. acetotacetate functional acrylic resin; higher solids, for use with Setalux in MAK APHA eq. wt. 10-1440 for 3.5 VOC Ketac primer system; non-HAPs

Setalux 17-7205 50% W - Z Xylene/n-butyl F - I @ 40% 8.3 2 max 100 max 1200 acetotacetate functional acrylic resin; for very fast drying, fast sanding acetate Xylene APHA ac. ac. eq. wt. primers; improved solvent holdout, salt-spray and humidity resistance

Setal 26-3701 100% D - G na na 9.8 1 max 3 max 130 ac.ac. acetoacetate modified polyester; very high solids, low viscosity, diluent for eq. wt. use with Setalux 10-1440 in <2.8 VOC systems; non-HAPs

Setal 26-3705 75% L - P xyl na 8.8 0.5 max 6 max 440 ac.ac. acetoacetate modified polyester; for use with Setalux 10-1440 in 2.1 - 2.8 eq. wt. VOC primer systems that require excellent corrosion resistance, fast cure and adhesion

“aa” all acrylic topcoatSetalux 17-1453 55% S - U MAK na 8.0 14 - 18 5 max 655 amine amine functional acrylic; fast air dry, low VOC, excellent durability, DSL eq. wt. compliant; non-HAPs

Setalux 27-1435 80% Z3 - Z5 MAK P - T @ 70% 8.6 1 max 200 max 600 epoxy epoxy functional acrylic; high solids, DSL compliant; non-HAPs in MAK APHA eq. wt.

Data Sheets.indd 1 5/27/08 10:29:30 AM



a. SHort oIl alkydS non dryInGCoconutSetal 11-1105 50% T - V xyl B- to E- @ 40% 8.3 14 max 3 max 650 superior pot life, good print resistance and hardness in xyl

Setal 11-1111 60% Z1 - Z3 xyl P - T @ 50% 8.6 10 max 3 max 430 work horse, good flow and hardness with pale color, excellent cold check in xyl resistance, for NC lacquer systems and conversion varnishes, CAB compatibility

Setal 11-1112 60% W - Y tol/ xyl G - J @ 50% 8.6 10 max 3 max 430 Setal 11-1111 in tol/xyl 85/15 pbw in tol

Setal 11-1113 70% X - Z n-BuAc/ MPK G - J @ 50% 9.0 10 max 3 max 430 Setal 11-1111 in n-BuAc/ MPK; non-HAPs in n-BuAc

Setal 51-1111 70% Z2 -Z4 t-BuAc/ A-100/ R - V @ 60% 9.0 12 max 3 max 430 Setal 11-1111 in t-BuAc blend; non-HAPs n-BuAc in t-BuAc

Setal 11-1114 60% Z1 - Z3 xyl O - S @ 50% 8.6 10 max 200 max 430 lighter color version of 11-1111 in xyl APHA

Setal 11-1115 70% X - Z n-BuAc/ MPK G - J @ 60% 9.0 10 max 250 max 430 Setal 11-1114 in n-BuAC/ MPK; low HAPs in n-BuAc APHA

Setal 11-1135 60% Y - Z1 tol/ xyl K - N @ 50% 8.7 12 max 3 max 370 plasticizer for NC lacquers, CAB compatibility, pale color, for sealers and in tol conversion varnishes

Synthetic Fatty acidSetal 11-1184 69% Z1 - Z3 xyl na 8.9 6 - 12 2 max 560 fast cure, hard, light color, good gloss retention; EU number - Setal 84 XX-70

B. SHort oIl alkydS oxIdIzInGTall OilSetal 11-1323 60% Z - Z2 tol/ xyl N - R @ 50% 8.7 8.5 max 5+ max 340 faster curing conversion varnishes, good hardness and adhesion, high drink, in tol for air dry and bake, 60% version of Setal 21-1323

Setal 11-1329 50% U - W xyl B - D @ 40% 8.3 10 max 5 max 440 lower viscosity, slower curing, improved flexibility and adhesion, general in xyl purpose air dry or bake

Setal 11-1335 50% Z2 - Z4 xyl N - T @ 40% 8.4 10 max 7 max 400 general purpose air dry or bake, high drink in xyl

Setal 11-1345 60% Z1 - Z3 VM&P/ iBuOH/ K - P @ 50% 8.1 5 - 10 6 max 400 general purpose air dry or bake, similar to Setal 11-1329; low HAPs tol/ xyl in xyl

Setal 51-1320 55% Y - Z1 T-butyl B - FW @ 40% 8.6 14 max 7 max 375 This is the same polymer as 11-1335 supplied in an exempt solvent blend acetate/A-100 tBac Gardner for lower VOC applications. Suitable for air dry, bake and conversion varnish applications for both wood and metal; non-HAPs

Soya OilSetal 11-1404 50% S - U xyl G - I @ 45% 8.2 10 - 18 5 max 800 low viscosity, very stable in conversion varnishes, for air dry, bake and 2K in xyl

Product InformatIon 2

II. COnvenTIOnal SOlvenT alKydS

Product Catalog.indd 2 5/13/08 4:05:03 PM


c. SHort oIl alkydS cHaIn-StoPPEdTall OilSetal 11-1390 50% Y - Z2 xyl H - K @ 40% 8.3 14 max 6 max na air dry or force dry coatings in xyl

Setal 11-1391 50% Z6 - Z8 A-100/ xyl U - X @ 40% 8.3 14 max 6 max na Setal 11-1390 in A-100 in xyl

Setal 11-1393 50% W - Y tol/ xyl O - T @ 45% 8.3 10 max 5 max na low viscosity, fast curing conversion varnishes in tol

Setal 11-1395 50% Z4 - Z6 VM&P/ iBuOH/ U+ to X @ 45% 7.8 10 max 5 max na Setal 11-1399 in VM&P/ iBuOH/ tol/ xyl; low HAPs tol/ xyl in xyl

Setal 11-1397 50% Z1 - Z3 xyl L - O @ 40% 8.3 12 max 6 max na air dry and bake coatings in xyl

Setal 11-1399 50% Z2 - Z4 xyl H - K @ 40% 8.3 10 max 5 max na fast curing conversion varnishes, air dry and bake coatings in xyl

Soya OilSetal 11-1490 50% O - R xyl F - I @ 45% 8.3 10 max 8 max na positive through dry, durable, air-dry, bake in xyl

Setal 11-1492 50% U - W xyl B - E @ 40% 8.2 10 max 6 max na positive through dry, durable, fast dry aerosol applications, higher in xyl aliphatic solvent tolerance

Setal 51-1492 60% Z - Z2 t-BuAc/ A-100/ K - O @ 50% 8.6 12 max 7 max na Setal 11-1492 in t-BuAc blend; non-HAPs n-BuAc in t-BuAC

Setal 11-1495 68% S - W MAK/ xyl na 8.6 12 max 6 max na positive through dry, durable, good humidity and early water spot resistance, (Setal 21-1491 and 21-1498 are higher solids versions) for air or force dry coatings; low HAPs

d. mEdIum oIl alkydSCoconut OilSetal 11-2111 60% V - X xyl F - I @ 50% 8.4 12 max 5 max 1200 plasticizer for NC lacquers, excellent color retention in xyl

Soya OilSetal 11-2407 60% Z3 - Z5 VM&P/ xyl D - G @ 45% 7.7 9 max 6 max na tough, flexible, excellent color and gloss; low HAPs in VM&P

Setal 11-2408 50% Z6- to Z7+ MS/ A-100/ xyl B - E @ 40% 7.6 12 max 4 max na very high viscosity, tough, excellent exterior durability and gloss retention; in xyl low HAPs

Setal 11-2457 50% Z1 - Z3 MS H - K @ 40% 7.6 9 max 4 max 835 good flow and leveling, exterior durability with flexibility, architectural in ms metal applications; non-HAPs

Setal 11-2458 50% Z5 - Z7 MS/ xyl T - V @ 40% 7.6 10 max 6 max na high drink, good flow and leveling, exterior durability with flexibility; in ms low HAPs

Setal 11-2460 70% U - W A-100/ PMAc/ A2 - A @ 50% 8.6 10 max 5 max na high solids flexibilizer for chain stopped alkyds, good flow and leveling, xyl in PMAc exterior durability with flexibility; low HAPs

Setal 11-2463 50% Z3 - Z5 VM&P/ xyl N - Q @ 50% 7.5 10 max 6 max na high drink, faster dry, good flow and leveling, exterior durability with in VM&P flexibility


II. COnvenTIOnal SOlvenT alKydS (continued)




II. COnvenTIOnal SOlvenT alKydS (continued)

Soya Oil (continued)Setal 11-2477 55% Z2 - Z4 MS/ A-100/ xyl na 7.7 12 max 8 max na fast initial cure, good durability; EU number - Setal 177 WS-65; low HAPs

Soya / linseed OilSetal 11-2660 50% U - Z MS/ A-100 B - F@ 40% 7.6 10 max 6 max na excellent flow & leveling, exterior durability, gloss retention, toughness, in ms meets TT-R-266 Type III in a slower solvent; non-HAPs

Castor OilSetal 11-2824 60% S - U xyl I- to K @ 55% 8.4 13 max 8 max 750 plasticizer resin, tough, good adhesion in xyl

E. lonG oIl alkydSTofa OilSetal 11-3323 70% Z3 - Z5 mineral spirits/ D - E+ @ 50% 8 4 - 5.5 7 max Gardner 700 Low HAPs long oil TOFA alkyd with a low acid value for stability with zinc A-100/xylene in mineral spirits oxide pigment. Suitable for exterior and interior architectural end uses; low HAPs

Setal 11-3334 70% Z4 - Z6 MS/ A-100/ xyl E - G @ 50% 8.0 7 max 7 max na high gloss, color stability, flow, leveling, flexibility and durability; low HAPs in ms

Soya OilSetal 11-3461 70% B - D MS na 7.8 14 max 8 max na good brushability, flow, body, flexible, color stability, and durable; non-HAPs

Setal 11-3466 70% Z - Z2 MS/ xyl B - D @ 50% 8.0 10 max 6 max na meets performance / composition requirement TT-R-266, Type I, Class A; in ms low HAPs

Setal 11-3677 70% Y - Z1 MS / A-100/ xyl na 8.0 11 max 6 max na good brushability, flow, body, color stability, and durable; EU number - Setal 270 WS-70; low HAPs

linseed OilSetal 11-3616 65% Y - Z1 MS/ xyl na 7.9 11 max 7 max na excellent penetration, very fast dry and excellent hardness development, exterior clears, stains and enamels; EU number - Setal 16 WX-65

f. modIfIEd alkydSRosin - phenolicSetal 12-1341 60% Z2 - Z4 xyl/ VM&P D - H @ 35% 8.2 22 max 10 max na excellent water resistance, hardness and corrosion, air dry and 2K, short, in VM&P tall oil alkyd, see 22-1343 for HS version

Setal 12-1628 50% X - Z xyl C - F @ 40% 8.3 26 - 32 11 max na good re-coat, short, linseed oil alkyd; improved corrosion resistance in xyl

Setal 12-1646 50% W - Y xyl G - J @ 40% 8.3 32 max 12 max na meets TT-P-664C for rust inhibiting lacquer resistant primer, air dry and in xyl 2K, short, linseed oil alkyd

Setal 52-1646 60% X - Z t-BuAc/ A-100/ L - P @ 50% 8.6 32 max 12 max na Setal 12-1646 in t-BuAc blend, non-HAPS n-BuAc in t-BuAc

SiliconeSetyrene 13-4437 60% W - Y MS/ xyl C - E @ 45% 8.0 8 max 8 max na tough, abrasion resistant, meets TT-E-490E, soya oil alkyd; low HAPs in ms

G. tHIxotroPIc alkydSSetal 11-2332 40% gel MS/ xyl na 7.0 9 - 14 8 max na good flow, brushing and non-sagging, medium tall oil; low HAPs




Iv. OIl mOdIFIed pOlyuReThaneS


III. COnvenTIOnal COpOlymeR alKydS

a. StyrEnatEdSetyrene 13-1405 60% Z2 - Z4 xyl T - V @ 50% 8.3 14 max 6 max na faster-dry enamels, sealers and primers, soya oil alkyd, meets MIL- In xyl E52891B

Setyrene 13-1807 50% X - Z VM&P/ tol/ E - G @ 40% 7.6 10 max 6 max na fast-dry enamels and sealers, better flexibility and film integrity, n-BuAc/ xyl in xyl soya/DCO alkyd, Rule 66 solvent blend, meets MIL-E52891B

B. VInyl toluEnatEdSoya OilSetyrene 13-2404 60% Y - Z1 VM&P B - D @ 40% 7.4 6 max 6 max na fast dry, aerosol, enamels and wood sealers; non-HAPs in VM&P

Setyrene 13-2424 60% Z - Z1 VM&P E - G @ 40% 7.6 10 max 5 max na very fast dry, stain stopper, aliphatic solubility; low HAPs in VM&P

Setyrene 13-2434 50% Z1 - Z3 VM&P P - S @ 40% 7.4 10 max 6 max na very fast dry, aerosol and dryfall coatings, higher drink; non-HAPs in VM&P

Setyrene 13-2441 60% Z1 - Z3 VM&P/xyl E - H @ 40% 7.7 10 max 5 max na very fast dry, aliphatic solubility, alkyd holdout and build, Rule 66 solvent; in VM&P low HAPs

c. acrylIc modIfIEdSetyrene 13-3504 50% P - T xyl C - E @ 40% 8.1 4 - 10 5 max na very fast dry, adhesion and durability, decorative enamels, transportation, in xyl aerosol

Setyrene 53-3504 60% Y - Z1 t-BuAc/ A-100/ O - T @ 50% 8.3 4 - 10 5 max na Setyrene 13-3504 in t-BuAc blend; non-HAPs n-BuAc in t-BuAc

Setyrene 13-3513 60% Z - Z2 tol O - S @ 50% 8.4 10 max 4 max na fast dry with good gloss, adhesion and durability, suitable for aerosol use in tol

Setyrene 13-3516 60% Y - Z1 VM&P/xyl D - G @ 40% 7.9 10 max 5 max na fast dry, aliphatic tolerance in VM&P

Setyrene 13-3540 50% R - U A-150 na 8.2 12 max 5 max na slower drying, good adhesion, exceptional flow and leveling, roll coat application

aStm tyPE ISetal 15-1477 60% Y - Z1 MS C - E @ 50% 7.6 2 max 5 max na tough and mar-resistant with good adhesion; non-HAPs in ms

Setal 15-1488 50% Z1 - Z3 MS B - F @ 40% 7.5 4 max 7 max na tough and mar-resistant with good adhesion, eggshell and low in ms gloss finishes; non-HAPs






V. ConVenTIonal SaTuRaTed polyeSTeRS

SaturatEd PolyEStErSSetal 16-1070 61% Z4 - Z6 A-150 W - Z @ 51% 8.9 10 max 2 max 1790 coil applied coatings, good post-cure flexibility, cold crush flexibility and in A-150 exterior durability

Setal 16-1094 68% X - Z A-100 na 8.9 10 max 3 max 1618 linear polyester for permanent flexibility in coil coatings, metal deco and post formed applications, good combination of flexibility and hardness; low HAPs

Setal 16-1169 67% Z1 - Z3 n-BuAc/ xyl na 9.0 4 max 300 max 212 branched, excellent corrosion resistance, skydrol resistance, for APHA 2K coating systems; EU number - Setal 169 SS-67; low HAPs

Setal 16-1173 60% 1.1 - 1.8 Pa.s. A-100/ xyl/ PGME na 8.7 10 max 4 max 817 high hardness, very good adhesion and flexibility, good chemical and water resistance, automotive finishing systems; EU number - Setal 173 VS-60

a. tHErmoPlaStIcSetalux 17-1261 51% Z2 - Z4 xyl S - V @ 41% 8.2 5 max 125 max na fast dry, exterior durable, for use in clear and pigmented coatings in xyl APHA

Setalux 17-1265 40% Z4 - Z5 tol U - Y @ 30% 8.0 34 - 40 50 max na exceptional dry, adhesion, and sanding properties, for vehicle in tol APHA refinish primers

Setalux 17-1274 45% Z2 - Z4 Oxsol 100/ H - N @41% 9.6 5 max 125 max na Setalux 17-1261 in exempt solvents; non-HAPs nBuAc/MeAc in nBuAc APHA

Setalux 17-1291 50% V - X xyl/ tol D - G @ 40% 8.3 4 max 250 max na excellent aliphatic tolerance, good compatibility with med oil alkyds, in tol APHA exterior durable, for use in pigmented coatings

B. acrylIc PolyolSSetalux 17-1015 60% Y - Z2 xyl L - P @ 50% 8.5 10 max 2 max 600 excellent drying, application and performance properties, a balance of in xyl performance and economy

Setalux 17-1152 51% U+ to X+ xyl/ A-100/ na 8.2 6 - 10 125 max 400 good durability, yellow resistant; better flow, leveling and overspray n-BuAc APHA wet-in; EU number - Setalux 1152 SS-51

Setalux 17-1190 60% Y - Z1 PMAc/ xyl M - P @ 50% 8.7 10 max 100 max 380 good appearance, excellent durability and gloss retention, good flow and in xyl APHA leveling properties

Setalux 17-1196 60% W - Y A-100 na 8.3 8 max 2 max 600 industrial maintenance systems, good exterior durability; low HAPs

Setalux 17-1198 70% Y - Z1 n-butyl acetate na 8.2 4.2 - 9.2 50 max 400 Acrylic polyol for clearcoat, monocoat and high end industrial topcoats. APHA Very good exterior durability, gloss, end hardness and adhesion over metallic basecoats.

Setalux 17-1445 70% Z1 - Z3 MAK K - N @ 60% 8.5 14 - 18 150 max 400 excellent durability and drying properties, good pigment grinding resin, in MAK APHA good flexibility, better flow, leveling and overspray wet-in, non HAPS, VR and GIF applications; non-HAPs

VI. ConVenTIonal aCRylIC




VI. ConVenTIonal aCRylIC (continued)

B. acrylIc PolyolS (continued)Setalux 17-1447 70% Z3 - Z5 n-BuAc/ xyl R - W @ 60% 8.7 8 - 13 30 max 400 excellent drying, flow and leveling, durability and yellowing in n-BuAc APHA resistance properties, good flexibility, very low color

Setalux 17-1455 70% Z1 - Z3 MAK K - Q @ 60% 8.4 6 - 8 100 max 380 excellent durability and yellowing resistance, low VOC’s; EU number - in MAK APHA Setalux 1156 K-70; non-HAPs

Setalux 17-1488 45% Z2 - Z4 Oxsol 100 na 10.3 6 - 10 125 max 400 good durability, yellowing resistance; VOC compliant; non-HAPs APHA

Setalux 17-1608 60% Z2 - Z4 xyl T - V @ 50% 8.5 8 - 12 2 max 600 excellent dry, exterior durability, good flexibility and chemical resistance, in xyl economy grade

Setalux 57-1608 55% W - Z t-butyl acetate G - K @ 45 8.4 8 - 12 2 max Gardner 600 This is the same polymer as 17-1608 supplied in an exempt solvent blend in tBac for lower VOC applications. Suitable for fast drying, durable 2K systems; non-HAPs

Setalux 17-1609 60% Y - Z1 PMAc/ tol I - L @ 50% 8.7 8 - 12 70 max 600 Setalux 17-1608 in PMAc in tol APHA

Setalux 17-1610 50% Z3 - Z5 Oxsol 100 T - W @ 40% 10.3 8 - 12 2 max 600 Setalux 17-1608 in Oxsol 100; VOC compliant; non-HAPs in O-100

Setalux 17-1611 60% Y - Z n-BuAc J - M @ 50% 8.6 8 - 12 40 max 600 Setalux 17-1608 in n-BuAc; non-HAPs in n-BuAc APHA

Setalux 17-1619 70% Z4- Z6 PMAc W - Y @ 60% 9.1 10 max 100 max 510 premium resin, rapid set to touch and dry, superior gloss for Industrial in PMAc Maintenance and Vehicle Refinish systems; non-HAPs

Setalux 17-1745 50% Z2 - Z4 n-BuAc na 8.4 6 - 8 1 max 850 very fast dry, exterior durability, good flexibility and chemical resistance, good adhesion to plastic, excellent application appearance; non-HAPs

Setalux 17-1762 65% Z2 - Z4 xyl T - V @ 55% 8.4 6 max 250 max 600 excellent pigment grinding resin, acid-etch in xyl APHA

Setalux 17-1763 65% Z1 - Z3 n-BuPr V - Y @ 60% 8.4 6 max 250 max 600 Setalux 17-1762 in n-BuPr; non-HAPs in n-BuPr APHA

Setalux 17-2152 51% U - X xyl na 8.2 6 - 10 125 max 400 Setalux 17-1152 in xyl APHA

Setalux 17-2400 63% Z2 - Z4 n-BuPr/ xyl U - X @ 55% 8.5 7 - 12 50 max 550 buffable in 2 hours, balance of economy and fast cure in xyl APHA

Setalux 17-2450 65% Z3 - Z5 n-BuPr P - T @ 55% 8.5 7 - 12 50 max 460 premium fast cure resin, long pot-life, excellent early hardness in n-BuPr APHA development, buffable in 2 hours; non-HAPs

Setalux 17-3156 60% X - Z xyl/ n-BuAc na 8.3 5 - 7 70 max 380 excellent durability, non-yellowing and adhesion with metallic basecoats; APHA EU number - Setalux 1156 XS-60



VI. ConVenTIonal aCRylIC (continued) non-Volatile Viscosity reduced WPG acid value color HEW % by Wt. cPS @25°c Solvent Viscosity (lbs/gal) (on nv) aPHa on Solids features

B. acrylIc PolyolS (continued)G-Cure 105P70 70% 10000-14000 PM Acetate na 9.1 na 100 max 570 Nuplex part #17-0105 - For industrial maintenance and automotive refinish. Exhibits superior gloss retention/yellowing resistance and rapid property development.

G-Cure 107A70 70% 1500-2500 MnAK na 8.5 na 100 max 460 Nuplex part #17-0107 - Heavy-duty maintenance coatings. Excellent chemical and weathering resistance.

G-Cure 108A70 70% 3500-5500 MnAK na 8.6 na 100 max 535 Nuplex part #17-0108 - Lower VOC version of G-CURE 105. Superior gloss retention/yellowing resistance for low-VOC, spray, brush, and roll applications.

G-Cure 109A75 75% 8000-12000 MnAK na 8.7 na 200 max 420 Nuplex part #27-0109 - For heavy-duty maintenance and industrial coatings. Improved chemical and weathering resistance. Excellent pigment wetting resin designed for high cross-link density.

G-Cure 109O60 60% 5000-9000 Oxsol 100 na 10 na 200 max 420 Nuplex part #17-0109 - This is the same polymer as 109A75 supplied in exempt solvent for lower VOC.

G-Cure 110A77 77% 5000-8000 MnAK na 8.8 na 100 max 500 Nuplex part #27-0110 - Premium exterior durability with high cross-link density for high performance coatings.

G-Cure 114A80 80% 3000-6000 MnAK na 8.5 na 200 max 800 Nuplex part #27-0114 - High-solids, low isocyanate demand, flexible and impact resistance. Used in light-duty maintenance, transportation and bridge coatings.

G-Cure 114BL80 80% 6000-10000 n-butyl Acetate na 8.6 na 200 max 800 Nuplex part #27-0115 - High-solids, low isocyanate demand, flexible and impact resistance. Used in light-duty maintenance, transportation and bridge coatings.

G-Cure 116A70 70% 1000-4000 MnAK na 8.6 na 100 max 700 Nuplex part #17-0116 - Economy polyol with good durability, hardness, and with very low isocyanate demand.

G-Cure 116BL70 70% 3000-6000 n-butyl Acetate na 8.8 na 100 max 700 Nuplex part #17-0117 - Economy polyol with good durability, hardness, and with very low isocyanate demand.

G-Cure 176BL76 76% 6500-13000 n-butyl Acetate na 8.6 na 200 max 460 Nuplex part #27-0176 - This is the same polymer as 107A70 supplied in n-butyl acetate at higher solids content.

G-Cure 177A70 70% 1500-2500 MnAK na 8.5 na 100 max 460 Nuplex part #17-0177 - Fast set version of G-CURE 107A70 for heavy- duty maintenance coatings. Excellent chemical and weathering resistance.

G-Cure 177BL70 70% 1500-2500 n-butyl Acetate na 8.8 na 100 max 460 Nuplex part #17-0178 - Fast set hydroxyl functional acrylic copolymer designed to produce low VOC high performance coatings. Coatings with an application VOC of 3.0 lbs./gal. can be produced for heavy-duty maintenance and industrial coatings. Excellent chemical and weathering resistance.

G-Cure 192BL80 80% 3000-7000 n-butyl Acetate na 8.6 na 200 max 400 Nuplex part #27-0192 - “Fast Set” version of TSAX 13-501. Suitable for high-performance maintenance and transportation coatings.

G-Cure 196BL80 80% 9000-12000 n-butyl Acetate na 8.7 na 100 max 800 Nuplex part #27-0196 - High-solids, low isocyanate demand. Used in light- duty maintenance, transportation, marine and bridge coatings.




B. acrylIc PolyolS (continued)G-Cure 601P75 75% 3000-10000 PM Acetate na 9 na 100 max 204 Nuplex part #27-0601 - High cross-linking, good chemical and Skydrol resistance for heavy-duty maintenance and aerospace applications.

G-Cure 806BL60 61 2000-4000 n-butyl Acetate na 8.5 na 60 max 625 Nuplex part #17-0806 - These polyols are used primarily in the automotive refinishing market. They have excellent durability/flexibility, and weatherability. They exhibit excellent chemical resistance and hardness on metallic substrates.

G-Cure 806PT60 60 5000-7500 PM Acetate Toluene na 8.8 na 60 max 625 Nuplex part #17-0807 - These polyols are used primarily in the automotive refinishing market. They have excellent durability/flexibility, and weatherability. They exhibit excellent chemical resistance and hardness on metallic substrates.

G-Cure 806X60 58.5 5000-7000 Xylene na 8.5 na 60 max 636 Nuplex part #17-0808 - These polyols are used primarily in the automotive refinishing market. They have excellent durability/flexibility, and weatherability. They exhibit excellent chemical resistance and hardness on metallic substrates.

G-Cure 836PT60 60 2000-4000 PM Acetate Toluene na 8.7 na 60 max 625 Nuplex part #17-0836 - These polyols are used primarily in the automotive refinishing market. They have excellent durability/flexibility, and weatherability. They exhibit excellent chemical resistance and hardness on metallic substrates.

G-Cure 867PWF60 60 3500-5000 PM Acetate na 8.5 na 100 max 635 Nuplex part #17-0867 - Superior end-use range of premium, urethane Ethyl Benzene HFBA4 exterior, and interior maintenance coatings. Outstanding adhesion, corrosion, and chemical resistance. Offers excellent aliphatic polyisocyanate compatibility at low use-levels for development of superior coating properties.

G-Cure 867PX60 60 3500-5000 PM Acetate Xylene na 8.6 na 100 max 635 Nuplex part #17-0866 - Superior end-use range of premium, urethane exterior, and interior maintenance coatings. Outstanding adhesion, corrosion, and chemical resistance. Offers excellent aliphatic polyisocyanate compatibility at low use-levels for development of superior coating properties.

G-Cure 868PWF60 60 4500-6500 PM Acetate na 8.5 na 100 max 795 Nuplex part #17-0868 - Modifier, flexibilizer for other G-CURE acrylic Ethyl Benzene resins to improve exterior durability and yellowing resistance. HFBA4

G-Cure 869PWF50 50 3500-7000 PM Acetate na 8.4 na 100 max 1085 Nuplex part #17-0869 - Rapid tack-free dry time for assembly-line type Ethyl Benzene applications. Modifier for improving the dry-time character of other polyols. HFBA4

G-Cure 870BLX50 50 3000-5000 PM Acetate Toluene na 8.4 na 100 max 822 Nuplex part #17-0870 - Faster-dry, high-gloss version of G-CURE 869PWF50.

TSAX 13-501 70% 3000-7000 n-butyl Acetate na 8.6 na 200 max 400 Nuplex part #27-0501 - High-solids acrylic polyol for high-performance maintenance and transportation coatings.

TSAX 13-722 72.5% 1000-3500 MnAK na 8.6 na 150 max 500 Nuplex part #27-0722 - Premium exterior durability. Recommended for medium-duty maintenance applications.




B. acrylIc PolyolS (continued)TSAX 13-916 70% 1000-1800 Xylene na 8.4 na 100 max 950 Nuplex part #17-0391 - Economy polyol with very low isocyanate demand for light-duty maintenance.

TSAX 13-939 60 5000-7500 PM Acetate Toluene na 8.8 na 60 max 625 Nuplex part #17-0393 - These polyols are used primarily in the automotive refinishing market. They have excellent durability/flexibility, and weatherability. They exhibit excellent chemical resistance and hardness on metallic substrates.

TSAX 13-955 80% 3000-7000 n-butyl Acetate na 8.6 na 200 max 400 Nuplex part #27-0395 - “Fast Set” high-solids, good impact resistance polyol for high-performance maintenance and transportation coatings.

TSAX 14-057 80% 2000-5000 Xylene Ethylbenzene na 8.7 na 200 max 435 Nuplex part #27-0057 - Premium exterior durability. Recommended for medium to heavy-duty maintenance applications.

TSAX 14-284 70% 10000-14000 PM Acetate na 9.1 na 100 max 570 Nuplex part #17-0284 - Designed for high build, higher volume solids acrylic urethane topcoats and primers. Formulations can be designed for high gloss, lower solvent industrial maintenance coatings.

TSAX 14-313 65 15000-19000 n-butyl Acetate na 8.7 na 200 max 638 Nuplex part #17-0313 - Superior end-use range of premium, urethane exterior, and interior maintenance coatings. Outstanding adhesion, corrosion, and chemical resistance. Offers excellent aliphatic polyisocyanate compatibility at low use-levels for development of superior coating properties.

TSAX 14-412 70% 2500-6000 MnAK na 8.5 na 100 max 460 Nuplex part #17-0941 - Lower color version of 107A70.




vIII. amInOplaST CROSSlInKeRS


vII. epOxy eSTeRS

EPoxy EStErSSetal 18-1011 50% W - Y Xylene I - L @ 40 8 2.5 max 7 max Gardner na Broad use in corrosion-resistant primers for metal. Can be air-dried, force- in xylene dried, or crosslinked with an amino crosslinker in a bake application.

Setal 18-1123 50% W - Y xyl J - M @ 40% 8.0 5 max 6 max na fast dry, excellent adhesion, chemical and corrosion resistance, industrial in xyl primer applications

Setal 18-1127 60% Y - Z1 MS H - J @ 40% 7.7 10 max 6 max na general purpose primers, DIY, trade sales; non-HAPs in ms

Setal 18-1301 70% Z - Z2 n-BuAc R - U @ 60% 8.5 3 max 6 max na high solids; non-HAPs in n-BuAc

Setal 28-4001 75% Z4 - Z6 MS YZ1 @ 65% 7.9 12 max 10 max na high solids, general purpose primers, DIY, trade sales in MS

a. urEa formaldEHydE rESInSButylatedSetamine 19-1001 55% V - Y n-BuOH/ xyl na 8.5 2 max 1 max na good cure, performance and stability

Setamine 19-1002 55% Z2 - Z5 n-BuOH/ VM&P na 8.4 1 max 1 max na good cure, performance and stability; Rule 66 exempt; low HAPs

Setamine 19-1004 60% P - R n-BuOH/ xyl na 8.6 1 - 4 1 max na good cure, performance and stability, improved compatibility

Setamine 19-1005 55% J - N n-BuOH na 8.3 1 max 1 max na good cure, performance and stability; low HAPs

Iso-ButylatedSetamine 19-1012 55% F - G iso-BuOH/ tol na 8.3 2 max 1 max na harder, lower viscosity, quicker cure than Setamine 19-1001

Setamine 19-1020 60% Y - Z1 iso-BuOH/ xyl na 8.5 2 max 1 max na very fast curing, suitable for high-speed wood coatings, 0.7% max free formaldehyde

Setamine 19-1023 50% W - Z iso-BuOH/ xyl na 8.5 2 max 1 max na fastest curing, suitable for high-speed wood coatings, 0.7% max free formaldehyde

Setamine 19-1050 63% X - Z1 iso-BuOH na 8.4 3 max 50 max na ultra low free formaldehyde < .02%, low HAPs APHA

B. mElamInE formaldEHydE rESInSSetamine 19-3138 70% 1.1 - 1.7 Pa.s. n-BuOH na 8.6 0.8 max 50 max na butylated melamine-formaldehyde; fast cure, excellent acid etch, EU number - Setamine US-138 BB-70; low HAPs




Ix. hIgh-SOlIdS SOlvenTBORne alKydS

a. SHort oIl alkydSCoconutSetal 21-1106 75% Z3 - Z5 tol/ xyl J - O @ 60% 9.0 18 max 8 max 864 chain-stopped, catalyzed and non-catalyzed lacquers, conversion varnishes, in tol bake enamels

Setal 21-2113 90% Z6 - Z8 PMAc/ xyl U - W @75% 9.2 10 max 4 max 372 very high solids, flexibility & flow, short to medium, conversion varnishes, in PMAc catalyzed lacquers

Tall OilSetal 21-1323 75% Z3 - Z5 n-BuAc/ MAK/ T - W @ 65% 9.1 8 max 6 max 340 conversion varnishes, lacquers; non-HAPs MPK in n-BuAc

Setal 21-2365 90% Z5 - Z7 PMAc H - K @ 70% 9.0 10 max 6 max 382 good hardness and adhesion, superior metal wetting properties; non-HAPs in PMAc

Soya OilSetal 21-1482 80% Z3 - Z5 sec-BuOH/ xyl O - S @ 65% 8.9 45 - 53 6 max na modifier for cure and telegraphing resistance, high acid value, improves in xyl crosslink density in bake systems

B. cHaIn-StoPPEd alkydSTall OilSetal 21-1392 75% Z4 - Z6 n-BuAc/ tol U - W @ 65% 9.1 15 max 8 max 450 good wetting and adhesion, economical in n-BuAc

Soya OilSetal 21-1491 75% Z1 - Z3 MIBK/ MPK/ xyl J - M @ 60% 8.7 12 max 8 max 1200 very fast air dry, excellent hardness, high gloss, good humidity, excellent in xyl color retention and early water spot resistance

Setal 21-1493 75% Z - Z2 xyl/ MPK G - I @ 60% 8.8 10 max 6 max 1200 excellent corrosion resistance and QUV in xyl

Setal 21-1494 75% Z2 - Z4 tol/ MPK M - P @ 60% 8.8 12 max 8 max 1100 excellent hardness, slight improvement in salt spray and QUV versus in xyl Setal 21-1491

Setal 21-1498 75% Z3 - Z5 n-BuAc/ MAK R - U @ 65% 8.9 12 max 10 max 1200 Setal 21-1491 in n-BuAc/ MAK; non-HAPs in n-BuAc

c. mEdIum oIl alkydSTall OilSetal 21-2461 90% Z5+ - Z6+ xyl F - H @ 70% 9.0 5 max 7 max 380 low VOC general metal bake coatings in xyl

Setal 21-2468 80% Z1 - Z3 n-BuAc/ xyl/ B - D @ 60% 8.7 14 max 7 max 1700 meets HS TTE-489 mil spec, excellent modifying resin for short oil A-100 in n-BuAc alkyd systems; low HAPs

Soya / linseed Setal 21-2662 80% Z3 - Z5 MAK/ xyl E - I @ 60% 8.6 10 max 8 max na good flexibility, durability, high film build; low HAPs in MAK

non-Oxidizing Setal 21-2820 75% Z3 - Z5 n-BuAc/ xyl/ tol T - V @ 65% 8.9 24 - 32 6 max 350 modifier for pre-cat lacquers and conversion varnishes, plasticizer, in n-BuAc promotes adhesion; low HAPs




d. lonG oIl alkydS Soya Setal 21-3461 98% min X - Z xyl na 8.3 12 max 8 max na ultra high solids, VOC compliant interior and exterior stains, modifier for waterborne systems to improve chalk adhesion; low HAPs Setal 21-3462 98% min X - Z xyl na 8.2 8 max 7 max na ultra high solids, VOC compliant interior and exterior stains, modifier for waterborne systems to improve chalk adhesion, slightly slower dry than Setal 21-3461; low HAPs

Setal 21-3468 98% Y - Z1 Aromatic 100 na 8.4 on solids 8 max Gardner na This is the lower HAPs alternative of the popular 21-3461, offering high 14 max solids with good drying properties for durable exterior or interior architectural end uses; low HAPs

linseedSetal 21-3604 97.50% W - Y xyl J - N @ 85% 8.5 12 max 9 max na ultra high solids, for use in stains or for pigment grinding, modifier for in ms waterborne systems to improve chalk adhesion; low HAPs

SunflowerSetal 21-3701 90% Z2 - Z4 mineral spirits/ na 8.3 10 max 8 max Gardner na High solids very long-oil alkyd resin; very good brushability, leveling, filling, tech xylene high gloss, low yellowing tendency, and good through-hardening

E. modIfIEd alkydSSetal 22-1343 75% Y - Z1 n-BuAc/ MPK/ xyl/ G - I @ 60% 8.8 15 max 13 max na rosin / phenolic modified, for non-lifting primer vehicle, HS TTP-664C MIBK in xyl type; low HAPs

Setyrene 23-4438 80% Z2 - Z4 MS/ PMAc W - Y @ 70% 8.6 12 max 8 max na 30 % silicone-modified, tough, abrasion resistant, meets TT-E-490E and in ms MIL- PRF-24635C; non-HAPs

f. coPolymEr alkydSSetyrene 23-2434 75% Z2 - Z4 xyl/ ethylbenzene/ I - N @ 60% 8.2 8 max 6 max na vt modified, very fast set and dry speed, good specular gloss, aliphatic MEK in xyl solvent tolerant

Setyrene 23-3317 80% Z5 - Z7 MAK/ MPK/ xyl V - X @ 70% 8.5 15 max 5 max 1300 acrylic modified, excellent exterior durability, good early water resistance in MPK

Setyrene 23-3319 80% Z5 - Z7 n-BuAc/ MAK U - X @ 70% 8.6 15 max 7 max 1300 Setyrene 23-3317 in n-BuAc/ MAK; non-HAPs in n-BuAc

Setyrene 23-3320 75% Z3 - Z6 MAK/ MPK/ W - Z @ 70% 8.5 2 max 6 max 1300 acrylic modified, superior durability and early water resistance nBuAc/ A100/ in MPK MIBK

G. HIGH-SolIdS oIl modIfIEd PolyurEtHanESetal 25-1402 80% K - M MS B - E @ 70% 7.8 2 max 6 max na soya oil, 350 g/l VOC compliant varnishes, blending resin for conventional in ms systems to reduce viscosity; non-HAPs

Ix. hIgh-SOlIdS SOlvenTBORne alKydS (continued)




xI. hIgh-SOlIdS aCRylIC

HIGH-SolIdS SaturatEd PolyEStErSSetal 26-1023 85% Z6 - Z8 xyl/ tol W - Y @ 75% 9.0 7 max 4 max 360 2.8 lb. VOC, general industrial or appliance use, stain and chemical in xyl resistance, excellent corrosion resistance

Setal 26-1035 90% Z3 - Z5 xyl/ tol na 8.9 5 max 5 max 280 2.3 lb. VOC, general industrial or appliance use, general purpose workhorse resin

Setal 26-1056 95% Z4 - Z6 n-BuAc S - V @ 85% 8.9 26 - 30 4 max 250 < 2.3 lb. VOC, excellent hardness, toughness, gloss, flow, durability, lower in n-BuAc temperature cure, telegraph resistance; non-HAPs

Setal 26-1610 98% Z3 - Z5 tol na 8.8 3 max 3 max 260 < 2.3 lb. VOC, linear flexibilizing resin, high performance, outstanding balance of flex, hardness and impact resistance, good chemical resistance for 2K systems; low HAPs

Setal 26-1611 84% Z3 - Z5+ n-BuOH/ xyl/ tol D - F @ 65% 9.1 10 max 3 max 300 2.8 lb. VOC, tough, hard, flexible coatings with good exterior exposure, in xyl for 2K systems

Setal 26-1617 80% W - Y n-BuAc/ tol na 8.9 3 max 3 max 380 flexibilizing modifier, good chemical resistance, for 2K systems; low HAPs

Setal 26-1688 80% 1.3 - 3.5 Pa.s. n-BuAc/ xyl na 9.2 2 max 300 max 400 slightly branched, outstanding flexibility, chemical and solvent resistance, APHA durability, for aerospace topcoats; EU number - Setal 168 SS-80; low HAPs

Setal 26-1715 72% Z1+ - Z3+ Aromatic 100/xylene na 8.8 9 - 13 25 max 400 Polyester polyol for automotive 1K or 2K clearcoats or topcoats; very good APHA outdoor durability, gloss retention and no yellowing in QUV, good mechanical properties and chemical resistance


x. hIgh-SOlIdS SaTuRaTed pOlyeSTeRS

HIGH-SolIdS acrylIc PolyolSSetalux 27-1026 80% Z2+ to Z4+ MAK R - U @70% 8.7 10 max 2 max 480 2.3 to 3.2 lb. VOC formulations, excellent durability; non-HAPs in MAK

Setalux 27-1316 80% Z3 - Z5 n-BuAc C - E @ 60% 8.7 6 max 200 max 800 2.0 to 2.8 lb. VOC formulations, economical, good balance of cost and in n-BuAc APHA performance; non-HAPs

Setalux 27-1460 74% Z5 max MAK/t-butyl na 8.9 6 - 10 50 max APHA 400 Acrylic polyol for very low VOC clearcoats and topcoats; faster drying flow acetate/methyl VOC coatings, very good flow and leveling, excellent durability and chemical acetate resistance; low HAPs

Setalux 27-1550 80% Z1 - Z3 MAK na 8.7 4 max 100 max 400 2.0 to 2.8 lb. VOC formulations, bake or 2K, low VOC modifier; non-HAPs APHA

Setalux 27-1590 80% Z1 - Z3 MAK na 8.6 4 max 100 max 400 2.0 to 2.8 lb. VOC formulations, fast dry, exterior durable; non-HAPs APHA

Setalux 27-1597 80% Z4 - Z6 MAK U - X @ 70% 8.8 8 max 3 max 400 2.3 to 3.2 lb. VOC formulations, premium quality; non-HAPs in MAK

Setalux 27-2677 90% Z5 - Z6 n-BuPr na 9.3 3 - 5 100 max 320 excellent pigment wetting properties, blending resin for low VOCs; non-HAPs




xII. hIgh-SOlIdS amInOplaST CROSSlInKeRS

HIGH-SolIdS amIno rESInS Setamine 29-1100 85% Y - Z1 n-BuOH/ EtOH na 8.9 1 max 1 max na butylated urea formaldehyde; broad general use, lower VOCs, high gloss; low HAPs

Setamine 29-3090 80% Z3 - Z6 n-BuOH U - V @ 65% 9.0 1 max 1 max na butylated melamine-formaldehyde; crosslinker for low VOCs; low HAPs in n-BuOH


Product InformatIonCreating the Solution Together! W1

onE comPonEnt % nVm VIScoSIty pH/aV tg/mfft (°c) fEaturES:

WaTeRBORne ReSInS

a. tHErmoPlaStIc EmulSIonSetaqua 6479 50 950 cps 8.5 4 Designed for cosolvent free; low VOC coatings for a wide range of architectural applications.

Acrocryl 63-980 50 950 cps 8.5 25 Designed for high performance interior/exterior coatings; exhibits high degree of durability.

Acropol 63-953 55 2,000 cps 5.2 2 Designed for coalescent-free low-temperature film formation; used to formulate low-odor and low/zero VOC broadwall finishes, with good scrub, block, and mud-cracking resistance.

Acropol 63-993 55 3,500 cps 5.2 13 High molecular weight PVAc copolymer exhibiting outstanding scrub and wear resistance.

Setaqua 6402 57 1,600 cps 8.0 0 Adhesion promoted; excellent flexibility; cement compatibility; resistance to aging and light; waterproof membranes; caulking, sealing, gap filler compounds.

Setalux 6438 45 750 cps 9.5 65 Carboxyl-functional copolymer; good mechanical stability and pigment loading.

Setalux 6472 40 100 cps 7.5 40 Excellent adhesion to metal, wood, and plastic; blends well with water reducible resins; general industrial finishes.

Setalux 6490 44 200 cps 8.5 25 High gloss; excellent corrosion resistance; industrial direct to metal topcoat enamels.

Setalux 6482 52 200 cps 8.5 85 Good pigment wetting; carrier vehicle modifier; pigment vehicle.

Setaqua 6471 48 700 cps 8.5 20 Used in anti-corrosive coatings of relatively low PVC; offers hard, impact resistant films with high water and salt spray resistance.

Viscopol 1904 50 1,000 cps 7.0 15 High performance interior wall binder; high stain and water resistance with good scrub performance.

Viscopol 2024 50 200 cps 8.5 20 Fine particle size; adhesion promoted; excellent film performance; variety of paint types and gloss levels; excellent tannin stain resistance.

Viscopol 4990 46 30 secs 7.5 13 Surfactant stabilized; VA/VeoVA copolymer exhibiting excellent wet adhesion and pigment binding characteristics.

Setaqua 6400 50 6,000 cps 6.0 17 High water and alkali resistant polymer with very fine particle size; excellent adhesion to a broad range of substrates; used in primer/sealers, textured coatings, masonry and industrial paints.

Setaqua 6476 47 30 secs 9.2 5 Moderately soft styrene acrylic for use in modified cementitious systems; typically two component for repair and patch mortars.

Setaqua 6463 50 500 cps 10.0 5 Surfactant free; fine particle size; excellent pigment wetting; excellent speed of cure and water resistance; traffic paints.

Setaqua 6409 50 500 cps 8.5 18 Fine particle size; APE free; adhesion promoter; high performance; high quality interior/exterior paint systems.

Setaqua 6488 50 500 cps 8.7 18 Adhesion promoter; high performance; high quality interior/exterior paint systems.

Setaqua 6498 45 500 cps 7.7 30 Hydrophobic; very fine particle size; high alkali and UV resistance; high performance deco and light industrial clear and pigmented applications.



onE comPonEnt % nVm VIScoSIty pH/aV tg/mfft (°c) fEaturES:

WaTeRBORne ReSInS (continued)

B. SElf-croSSlInkInG EmulSIonSetalux 37-5045 55 200 cps 7.5 0 All acrylic; very good flexibility and elongation properties; good durability and dirt pick-up resistance; elastomeric coatings.

Setalux 37-6756 40 1000 cps max 8.0 na Self-crosslinking emulsion with rapid hardness development, good sandability and excellent film and in-can clarity. Recommended for OEM wood clear coat applications; non-HAPs

Setalux 6766 40 150 cps 8.5 50 Excellent block and chemical resistance; plastic, wood and concrete coatings.

Setalux 37-6768 40 100 cP max 8.0 8 All acrylic; APE free; improved durability; excellent film clarity, gloss, durability and stain resistance; concrete applications.

Setalux 37-6770 44 700 cps 9.0 15 Gradient morphology; good balance of hardness, flexibility and chemical resistance; general purpose for metal and wood.

Setalux 37-6781 44 75 cps 7.5 17 APE free; gradient morphology; high gloss; excellent blocking resistance; improved durability; wood and concrete.

c. tHErmoSEt acrylIcSetaqua 6572 50 400 cps 8.8 32 Crosslinking; hydrophobic; UV durable for high performance glazes/sealers over concrete, wood, metal substrates.

Setaqua 6573 50 400 cps 8.8 14 Crosslinking; hydrophobic; UV durable for high performance glazes/sealers over concrete, wood, metal substrates.

Setaqua 6576 50 3,000 cps 7.0 48 Crosslinking; hydrophobic; UV durable for high performance glazes/sealers over concrete, wood, metal substrates; ideal for primed or DTS baking applications.

Setaqua 6562 44 300 cps 7.5 15 Excellent exterior durability; adhesion; excellent flow and leveling; industrial enamels and maintenance primers; crosslink with melamine.

d. PolyurEtHanE dISPErSIonS Setal X11707 36 1,000 Pa.s 8.0 <0 NMP free polyurethane emulsion; good hardness development and chemical & abrasion resistance; flooring, furniture & joinery application.

Setal X11712 45 0.55 Pa.s 7.0 -- Fatty acid modified; NMP free; primer and topcoat for metal.

E. acrylIc/urEtHanE HyBrIdSetalux X11717 35 100 Pa.s 8.5 -- Good hardness and chemical resistance for deco and wood applications.

f. WatEr rEducIBlE alkydS Setal 41-1390 70 Z5 40 na TOFA based; fast dry; excellent gloss retention; good corrosion resistance; low application viscosity; general purpose industrial coatings.

Setal 41-1396 70 Z6 40 na TOFA based; superior hydrolytic stability; good early water resistance; very fast dry; good corrosion resistance; general industrial coatings.

Setal 41-1398 70 Z5 40 na Soya/TOFA chain stopped alkyd featuring fast air dry; primers and gloss enamels; can be force dried or stoved.

Setal 41-1497 75 Z6 44 na Soya based; improved durability; 2.8 lb/gal VOC; good flexibility; industrial coatings.

G. WatEr rEducIBlE EPoxy Setal 48-6002 70 Z6 61 na Chemical-, corrosion-, and humidity resistance; good adhesion and durability; blend with Setalux 37-3372 for faster dry; bake primer for maintenance.

H. alkyd dISPErSIon Setal 31-6004 45 1200 - 1700 cps 7.4 na High performance urethane-modified alkyd suitable for both wood and metal applications. Fast drying and durable; non-HAPs



05/08

kEy

xIII WaTeRBORne ReSInS (continued)

AcAc EW: aceto acetate equivalent weight, on n.v. SCA sag control agentlow HAPs: low HAPs content, generally 7 pbw or less based on total solvent VR vehicle refinishesnon-HAPs: zero HAPs content, based on total solvent GIF general industrial finishesNon - iso: non-isocyanate containing coating resins system

high solids resins (>70% unless otherwise specified) can typically be used to produce coatings at 3.5 pounds per gallon VOC

nuplex resins • 4730 crittenden drive • louisville, ky 40209 • Phone: 1.800.873.5410 • www.nuplexresins.com

All information, recommendations and suggestions, concerning the product and its use, are believed to be reliable. However, Nuplex Resins gives no assurance as to the accuracy, completeness, or adequacy for a particular purpose. It is the user’s responsibility to determine the suitability for its own use of the products. No guarantee or warranty (whether expressed or implied including the warranties of merchantability and fitness for a particular purpose which are hereby disclaimed) is made by Nuplex Resins as to the results to be obtained from using the described products, nor shall Nuplex Resins be liable for any use by others of the described products. Users are responsible for ensuring compliance with local legislation and for obtaining the necessary certifications and authorizations. All orders are subject to the general conditions of sale of Nuplex Resins, which are printed overleaf and/or can be downloaded from www.nuplexresins.com. All of user’s general terms and conditions are herewith deemed rejected. Nuplex Resins owns all copyrights and other intellectual property rights in the content of this document. Reproduction or redistribution in any form is not allowed.

tWo comPonEntS % nVm VIScoSIty pH/aV tg/mfft (°c) fEaturES:

WaTeRBORne ReSInS (continued)

a. acrylIc dISPErSIonSSetaqua 6511 47 5.5 cPa.s 8.0 12 All acrylic; 400 HEW on solids; crosslink with isocyanates; economical; good flexibility; industrial high gloss varnishes and topcoats.

Setaqua 6512 42 4.5 cPa.s 8.0 32 All acrylic; 800 HEW on solids; crosslink with isocyanates; economical; good flexibility; industrial high gloss varnishes and topcoats.

Setaqua 6520 45 10 cPa.s 6.8 45 All acrylic; 530 HEW on solids; very good drying properties, good mechanical properties and good water resistance; primers and topcoats; non-HAPs

B. rHEoloGy modIfIErSSetaqua 6801 24 22.5 Pa.s 6.4 8 Optimized rheology for excellent atomization and aluminium orientation; zero VOC’s; VR and OEM basecoat.

Setaqua 6802 24 65 Pa.s 7.0 51 Same as Setalux 37-6801 with increased pseudoplasticity. c. PolyEStEr PolyolSSetal 46-6306 60 2 Pa.s 25 25 630 HEW; water soluble after neutralization; good pigment wetting; good stabilization of aluminum pigments; grind resin for waterborne basecoats.

Setal 46-6407 26 4.4 Pa.s na 25 Excellent pigment wetting; good stabilization of aluminum pigments; improves film forming and flow; automotive OEM and VR basecoats.


RCA Anti Sag

Documents

Transcript of RCA Anti Sag