Rail Signalling and Power Product and Services Catalogue

RSP Rail | 01752 969321 | [email protected]

Product and Services Cataloguewww.rsprail.co.uk | 01752 969321

Rail Signalling and Power

2 RSP Rail | 01752 969321 | [email protected]

Introduction to RSPRail Signalling & Power; More than just a leading UK supplier of Signalling and Power products

About RSPRSP has an experienced workforce focussed on delivering high quality design, manufacturing and test of electrical and electronic housings to the UK Rail industry.

The company is a member of the Hampden Group, a leading provider of specialist insurance, investment and financial support services.

Our TeamWe have a team of IRSE licenced signalling engineers and mechanical engineers with a wealth of knowledge and experience on both mainline and mass transit projects – across overseas and UK markets. Our specialised services cover Signalling and E&P works from concept design, detailed wiring design all the way to entry into service and project handback.

The multi-skilled teams of installation and testing engineers are co-located with our designers to offer an holistic and innovative solution in the most efficient way possible.

Our Senior Team have over 100 years combined experience delivering some of the world’s most complex projects.

Get in touch today Call: 01752 969321 Visit: www.rsprail.co.uk


Table of ContentClick a page to jump straight to it

Power: Functional Supply Points (FSP) 23

FSP Range Overview 24

Power Product Selector 25

FSP01/02 Switchgear 26

FSP03 Switchgear 37

FSP04 Switchgear 56

TC04 Terminal Chambers 77

Principal / Auxiliary Supply Points (PSP/ASP) 114

Domestic Network Operator Cubicles (DNO) 116

Points Heating Control Cubicles (PHCC) 118

Level Crossing Lighting Control (LCU/LCC) 120

Rail: Services 5

Plug Couplers 8

Component Boards 10

Magshields 15

Signalling: Signalling Location Cases 18

Relocatable Equipment Buildings (REB) 19

Equipment Racks 20

Signal Aspect Flashing Relays (SAFR) 21

RailSignallingPower


RSP Services – Design

Contact us to order or get more infoCall us on 01752 969321 Alternately you can fill out our online form

Rail

OverviewRail Signalling & Power have a team of IRSE licensed signalling and mechanical engineers with a wealth of knowledge and experience. Our specialised services cover those activities undertaken in Signalling and Electrification & Plant work packages from GRIP 3 through to GRIP 8. We are also experienced in undertaking CRE and CEM roles as required. Our engineering design services are delivered from our modern UK design office. We have proven experience across a range of safety-critical sectors and clients. Our engineering designers are focussed on providing a service to deliver an innovative design solution, to both electrical and mechanical engineering problems and work in accordance with CDM regulations and ISO 9001.

RSP can design the following equipment: � GRIP 3-8

� E&P Design Works

� Stage Works & Enabling Designs

� Design Modifications

� Correlation Updates

� Final Record Updates & Returnds to NRG

� Product Development

� Power/Volt Drop & Heating Calculations

� 2D Microstation

� 3D Solidworks


RSP Services – Build


Rail

OverviewRail Signalling & Power are manufacturers of equipment housings for both Signalling and E&P solutions. From simple Trackside Connection Boxes (TCB) to full size Relocatable Equipment Buildings (REB) or Principal Supply Points (PSP), RSP have the knowledge and capabilities. Working from our factory in Saltash, Cornwall, we can design, manufacture and test complete housing solutions offering our clients and its project the increased safety of off site manufacturing.

RSP can build the following equipment: � Functional Supply Points (FSP)

� Relocatable Equipment Building (REB)

� DNO Cubicles (DNO)

� Signalling Location Case (LOC)

� Auxiliary Supply Points (ASP)

� Points Heating Control Cubicle (PHCC)

� Signal Aspect Flashing Relay (SAFR)

� Principal Supply Points (PSP)

� Trackside Disconnection Box (TCB)

� Lighting Control Cubicles (LCC)


RSP Services – Supply


Rail

OverviewRail Signalling & Power are specialist in Rail Cat numbers and PADS approved products. If you are looking for a supplier of Network Rail approved products and components then look no further than RSP. We are an entrusted supplier of materials into the rail industry with a proven track record in helping to source and supply to keep to project and clients timescales. Serving the rail infrastructure contractors and Network Rail itself, RSP offer a dedicated project support network or just a simple product supply depending on the requirements of the project.

RSP can supply the following equipment: � Rail Cat. No’s

� NR PADS Approved Products

� Signalling

� Power

� Telecoms

� Electrical

� Mechanical

� Fixings

� 2BA Covers

� SIN119

� Plug & Play

� Cable


A full range of Network Rail Product Accepted pre-wired, fully assembled and tested plugs and recaptacles aka “Plug Couplers”

Key Features: � Reduced installation time, improved reliability and improved project safety.

� Assembled using only Network Rail accepted signalling wire.

� All plug couplers conform to military specification MIL-DTL-5015

� All plug couplers come with a free ends available in a range of standard lengths; 0.3m, 0.5m, 1.0m, 1.5m, 2.0m

� Available in Front or Rear Panel mounting depending on application

� Can be supplied as a standalone product or speak to us about designing plug couplers into a fully integrated project delivery solution.

Wired Plugs and Receptacles


Rail


Wired Plugs and Receptacles

Cable Receptacles General Use MCB-OD Signal &

Indicators TPWS IBCL & HyDrive

Point Operating Equipment

Train Detection

Lineside Cabling

Lineside AzLM

& Quad Cabling

Black BS6231 Type CK 2.5mm²

MIL5015 Receptacle (F) to Free End

MIL5015 Receptacle (M) to Free End

White DEF STAN 61-12 Pt6 Type 3 0.75mm²


MIL5015 Receptacle (M) to Free End

3 Wire Bl/Wh/Scr Type A4


A4 2 core + screen MIL5015 Receptacle (F) to Free End

Blue & Yellow 4 Wire DEF STAN 61-12 Pt6 Type 3

1.0mm²


Blue & Yellow DEF STAN 61/12 Pt6 Type 3

1.0mm²


Rail


Component Boards

A comprehensive range of pre-assembled and factory tested component boards.

Key Features: � Easy to install and sized to fit in a standard single (or double where stated) size

BR930 series relay slot.

� Robust construction with board made from either Stainless Steel or Paxolin.

� Featuring 400V rated Weidmüller 2.5mm² screw terminal blocks.

Need a tailored design?Our IRSE licensed designers can give you the bespoke solution you need. Choose from our existing product selection or contact us to have a bespoke item made.


Rail


Component Boards

Rail

Application Description Components Part No.

Point

Single Point End 2 x 1kΩ 10W DLS20021

Single Point End 2 x 1.5kΩ 10W DLS20252

Double Point End 4 x 1kΩ 10W DLS20023

Clamp Lock 2 x 2.2kΩ 10W DLS20104

Signal

Double Flashing Aspect Signal 2 x 680Ω 10W DLS20022

Double Fibre Optic Banner Signal 2 x 47Ω 50W DLS20026

Position Light Signal 4 x 2.2Ω 10W DLS20101

ECRO 1 x 1.2Ω 2.5W DLS20106

Fibre Optic Banner Signal 1 x 4.7Ω 50W DLS20107

TPWS1 Resistor 1 x 3.9kΩ 25W DLS20032

2 Resistor 2 x 3.9kΩ 25W DLS20076

AWS 2 x 5.6Ω 25W DLS20142

Level Crossing Audible Warning Volume Limiter (Double Width) 6 x 680Ω 2.5W 6 x 1kΩ 2.5W DLS20165

General

1 Resistor 0.25W 1 x 20kΩ 0.25W DLS20280

1 Resistor 0.4W 1 x 15Ω 0.4W DLS20279


1 Resistor 4W 1 x 15Ω 4W DLS20281

1 Resistor 5W 1 x 1.2Ω 5W DLS20257


1 Resistor 25W 1 x 10kΩ 25W DLS20267



2 Resistor (10W) 1 x 10kΩ 10W 1 x 2.2Ω 10W DLS20171

2 Resistor 360 (50W) 3 x 360Ω 50W DLS20164

2 Resistor 470 (50W) 2 x 470Ω 50W DLS20037

3 Resistor (10W) 2 x 1kΩ 10W 1 x 2.2Ω 10W DLS20170


Resistor Plate Range


Component Boards

Rail


General

1 Diode 400V 1 x IN5404 400V 3A DLS20039

4 Diode 400V 4 x IN5404 400V 3A DLS20100

4 Diode 50V 4 x IN4001 50V 3A DLS20179

Diode Plate Range


Component Boards

Rail


HO Board

1 Capacitor, 1 Resistor1 x 470µF 100V 1 x 330Ω 25W

DLS20131


DLS20132

1 Capacitor, 1 Resistor1 x 2200µF 100V 1 x 6.8Ω 25W

DLS20136

2 Capacitors, 2 Resistors2 x 470µF 100V 2 x 330Ω 25W

DLS20172


DLS20174


DLS20176


DLS20193


DLS20294


DLS20295


DLS20296

HO Board - Double Width

2 Capacitors, 2 Resistors2 x 2200µF 100V 2 x 6.8Ω 25W

DLS20173

2 Capacitors, 2 Resistors1 x 470µF 100V 1 x 1000µF 100V 2 x 150Ω 25W

DLS20175

JO Board J/O Board 11V2 x IN5404 400V 3A 2 x 100Ω 2.5W

DLS20133

HOJ Board 1 Capacitor, 1 Diode, 1 Resistor1 x 470µF 100V 1 x 330Ω 15W 1 x IN4004 400V 1A

DLS20065

HOJ Board - Double Width 2 Capacitors, 2 Diodes, 2 Resistors2 x 6800µF 63V 2 x 36Ω 2W 2 x IN4004 400V 1A

DLA20231

Capacitor / Resistor /Diode (HO / JO / HOJ) Plate Range


Component Boards

Rail


ATP TrF Board6VA Transformer (CPA10047)

1 x 15Ω 5WDLS20167

Dummy Load Plate Range


A range of covers providing additional barrier protection from live terminals in accordance with NR/L2/SIG/11201 - Mod B3

Key Features: � Quick and easy installation - average install time of 16 seconds.

� Simple, safe non-intrusive barrier.

� No special tools or equipment needed - only a standard 2BA nut runner required.

� Complete with 4mm test point holes to enable measurement and testing with covers in place.

� Fully compatible with terminals requiring red dome nuts.

Magshields


Rail


Magshield Product Range

Rail

Product Part No. Railway Cat No.

6-way 2BA 6 Terminal Block Cover DMS2BA06 0086/043943




BS714 Cartridge Fuse Holder Cover DMS2BAF1 0086/043947

Pack of 10 Red Dome Nuts for use with 2BA covers CFR00033 0086/043948



Magshield Range:

RailSignallingPower


A full range of Network Rail Product Accepted full and half width location cases suitable for signalling, telecoms and power applications.

Key Features: � Built to either your own design or allow us to produce detailed design using

our unique RSP standardised approach to provide; greater consistency, improved lead times and cost savings.

� Galvanised mild steel, stainless, steel and GRP options.

� Configured to suit relay and computer based interlocking equipment or to deliver a full Digital Railway ready solution.

� All cases can be supplied full 3A tested in the factory and we can provide the option of accommodating Factory Functional testing.

� Full width case Dimensions; W=1022mm x H=1861mm x D=558mm. Max Weight = 400Kg.

� Half Width Case Dimensions; W=588mm x H = 1861mm x D=558mm. Max Weight = 200Kg.

Need a tailored design?Our IRSE licensed designers can give you the bespoke solution you need.

Location Cases


Signallng


Available in standard Network Rail sizes from type 1 to 9 or made to your bespoke dimensions. RSP can offer an REB to meet your needs from dedicated Signalling rooms to combined rooms or split purpose buildings.



� Available in a range of RAL colours including standard Green and Grey railway options.

� Configured to suit relay and computer based interlocking equipment or to deliver a full Digital Railway ready solution.

� Full range of options available including: additional internal walls, removable side walls, floor re-enforcement, bespoke lighting arrangements, forced air ventilation or air conditioning as required, intruder and fire alarms.

� All REBs can be supplied full 3A and / or BS EN61439 tested in the factory and we can provide the option of accommodating Factory Functional testing.


Relocatable Equipment Building


Signallng


Whether free standing or wall/floor mounted RSP are experts in providing equipment racks for installation in existing buildings and housings of all shapes and sizes. We can provide support from initial site surveys, 3D modelling, factory build and test all the way to assistance with on-site installation.

Key Features: � Built to either your own design or allow us to produce full 3d concept and

detailed wiring designs using our unique RSP standardised approach to provide; greater consistency, improved lead times and cost savings.

� We can supply single racks or multiple plug coupled or free wired racks to suit.

� Configured for relay and computer based interlocking equipment or power and telecoms applications.

� We have experience in both Network Rail and London underground sites and have key knowledge to overcome the challenges of tight spaces, restricted access, listed structures and many other site issues.

� All racks can be supplied full 3A and / or BS EN61439 tested in the factory and we can provide the option of accommodating Factory Functional testing.


Equipment Racks


Signallng


The only Network Rail Accepted Product to replace the old Flashing Aspect Control Unit (FACU).

Key Features: � Railway Cat No. 086/009191.

� RSP Part No. DLL05246.

� Compliant to NR/SP/SIG/1007.

� Compatible with both incandescent and LED Signals.

� Quick and easy installation with base and unit designed and built to fit into standard BR930 relay slot.

� Adaptor plate available to allow quick and easy replacement of an old FACU module.

� Supplied fully certified and factory tested for improved reliability.

Signal Aspect Flashing Relay

Signallng


RailSignallingPower

Functional Supply Point (FSP)Power


OverviewA Functional Supply Point (FSP) is the equipment tasked with power distribution throughout the rail infrastructure. RSP’s range of products cover all installation requirements - from a legacy changeover of a single piece of switchgear to a full FSP equipment housing, offering multiple power supplies and auto reconfiguration facility.

RangeRSP produce a range of FSP products in both class I and class II for use in signalling power distribution systems as defined in NR/L2/ELP/27410. The range conforms to NR/L2/SIGELP/27409 Issue 2.

RSP’s FSP01/02 switchgear assemblies is suitable for single and dual end fed systems with manual reconfiguration. Available in both 240V and 650V configurations.

The FSP 03 can be installed within dual end fed, auto reconfiguration systems and can be installed with all approved ARS systems currently in the market place. Switching can be provided for 110V through to 650V installations, both ac and dc.

The FSP04 range is designed specifically for SIN119 solutions to replace legacy installations. Supporting this is the range of TC04 Terminal Chambers which can be used for cable termination to support the whole FSP range.

Functional Supply Point (FSP)Range Overview

In House Manufacture And TestingAll our products are built at our manufacturing facilities in Plymouth. Our manufacturing and test staff have a wealth of experience in this field and also hold IRSE licences appropriate to their role. This gives our clients peace of mind that we will deliver a high standard of workmanship and quality which is then verified by our in house testing team, who carry out full 3A testing of each product.

InnovationThe RSP range offers a number of unique advantages to the industry and our customers. We can install up to four 1500VA transformers or up to four 10A T/J’s within a single FSP. Alternatively we could provide an FSP that houses a 25Ah point battery system, inclusive of charger. Feeder cables up to 120mm² in both copper and aluminium can also be installed easily, using our sliding gland plates.

SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales.

Power

Contact us to order or get more infoCall us on 01752 969321Alternately you can fill out our online form


FSP Type

Distribution Topology Architecture Configuration Installation

Single End Fed Dual End Fed Manual Auto New Legacy

FSP01

FSP02

FSP03

FSP04

Power Product SelectorUse the table below to find your ideal product

Power


FSP01 and 02

Power

FSP Type 20DLLF2S20

FSP Type 21DLLF2S21

FSP Type 20DLLF2P20-02



Class I I II II II

Feeder Switches 2 2 2 2 2

Functional Supplies 2 3 2 3 3

Feeder Cable Size

(Cu or Al)16-120mm² 16-120mm² 16-120mm² 16-120mm² 16-120mm²

Type of Fuses BS88 BS88 IEC IEC IEC

Dimensions (mm)W=498

H=346

D=259

W=498

H=346

D=259

W=506

H=400

D=233

W=506

H=400

D=233

W=506

H=400

D=233

Weight 18Kg 18Kg 13.5Kg 13.5Kg 13.5Kg

Railway Cat No. 092/000296 092/000297 054/213902 054/213903 054/213904

Additional Comments Surge Arrestor Protection provided

Surge Arrestor Protection provided

Labelled for use in 240V systems.

• NetworkRailProductAcceptanceCertificatePA05/07055(ClassI)and PA05/07053(ClassII).• ComplianttoNR/L2/SIGELP27409Issue2.

• AllFSP01and02productscomefittedwithRSP’suniqueremovableand split-ableglandplates.


FSP01/02 Switchgear Assembly - Type 20 Class 1

� Railway Cat No - 092/000296.

� RSP Part No. DLLF2S20.

� Class I Distribution Enclosure for 650V Signalling Systems.

� Surge Arrestor Protection provided.

� Robust stainless steel enclosure.

Key Features: � Dedicated Ring Power IN and OUT Isolators.

� Compatible with Copper (Cu) or Aluminium (Al) 2c Feeder Cables up to 120mm2.

� Easy cable installation with Magplate sliding split-able Gland Plate.

� Two Switched and Fused Output Functional Supplies.

� Functional Supply Fuse Carriers BS88.

� Compliant to Network Rail specification NR/L2/ELP/27409 Issue 2.

� Dimensions W=498mm x H=346mm x D=259mm.

� Weight = 18Kg.

FSP01/02 - Type 20 Class 1

Power




Power

1

2

3

4

5

6

1

2

3

4

5

6

1

2

3

4

5

6

1

2

3

4

5

6

1

2

3

4

5

6

T

B

f2 T

B

f3 T

B

f4 T

B

f5 T

B

f6T

B

f1

T1

T2

T3

T4

T5

T6

T7 T8 T10T9T11 T12 T13 T14

DIMENSIONINGFSP02 Type 20SS

WIRING DIAGRAM

INTERNAL VIEW

346

259

224

398

498

458

306

346 #3

B

T2 SUPPLY

NO

POINTTEST TEST

NC

CARRIERFUSEABBE91/32





CARRIER

L1-B

X650 B

N

L2-N

X650 B

K

L1-B

X650 B

N

L1-B

X650 B

N

L1-B

X650 B

N

L1 - BX650

L2 - NX650

FUSEABB

ISOLATORABB

OT80FT3

ISOLATOR

#1 #2

#3 #4

FUTURE ALARM

#4 #3 #4

ABBOT80FT3

E91/32

SUPPLYINCOMING

MAINSW1

SUPPLY 1CIRCUIT

FUNCTIONALSWA

SUPPLY 2CIRCUIT

FUNCTIONALSWB

SUPPLY 3CIRCUIT

FUNCTIONALSWC

SUPPLY

16mm COPPER BUSBAR

PS3/60/16

L1-B

X650 B

N

L1-B

X650 B

N

L1-B

X650 B

N

#3 #4 #3 #3#4 #4

SW1

OUTGOINGMAIN

ISOLATORABB

OT40FT3

ISOLATORABB

OT40FT3

ISOLATOR

L2-N

X650 B

K

L2-N

X650 B

K

L2-N

X650 B

K

L2-N

X650 B

K

L2-N

X650 B

K

L2-N

X650 B

K

#2

T

B

T

B

T

B

T

OT40FT3

C NCNO

T1 SUPPLY INDICATION

E

1

BELDON 9302

#1

L2-N

X650 B

K

L1-B

X650 B

N

#1 #2

#1 #2

TO

EARTH

STUD

SW2ABB

POINT

SWA SWB SWC

L N

C

SW2

BOTHORPERTM150/650ESP

TERMINALCHAMBER

TERMINALCHAMBER




FSP01/02 Switchgear Assembly - Type 21 Class 1

� Railway Cat No. 092/000297.

� RSP Part No. DLLF2S21.

� Class I Distribution Enclosure for 650V Signalling Systems.

� Robust stainless steel enclosure.





� Three Switched & Fused Output Functional Supplies.




� Weight = 18Kg.



4

51

2

3

6 4

51

2

3

6

3

4

51

2 6 4

51

2

3

6 4

51

2

3

6

T

B

T

B

T

B

T

B

T

B

T

B

f1

T1

T2

T3

T4

T5

T6

T7 T8 T10T9 T11 T12

WIRING DIAGRAM DIMENSIONINGFSP02 Type 21SS

INTERNAL VIEW

398

306

498

458

346

259

346

224

L2-N

X650 B

K

SWA

1

T1 SUPPLY

#4

FUNCTIONAL

T2 SUPPLY

#4 #3

SUPPLY 1CIRCUIT

TESTPOINT

E91/32ABBFUSECARRIER




E91/32

CARRIER

L1-B

X650 B

N

L1-B

X650 B

N

L1 - BX650

ABBFUSE

ABBFUSE

L2 - NX650

OT80FT3

ISOLATOR

#3 #4 #3

ABBISOLATOR

CARRIER

SUPPLYINCOMING

MAINSW1

SUPPLY 3

ISOLATOR

SW2

L2-N

X650 B

K

#4

ABBOT80FT3

B

SWBFUNCTIONAL

CIRCUITSUPPLY 2

SWC

SUPPLY

16mm COPPER BUSBAR

PS3/60/16

FUNCTIONALCIRCUIT

MAINOUTGOING

SW1OT40FT3

ABBISOLATOR

OT40FT3

ISOLATOR

L2-N

X650 B

K

L2-N

X650 B

K

T

B

T

B

T

B

T

B

TO

EARTH

STUD

ABB ABB

POINT

SWA SWB SWC

T3 SUPPLY

T

B

T

E91/32

#5 #5

L2-N

X650 B

K

L1-B

X650 B

N

#1 #2

L1-B

X650 B

N

#3 #4

L2-N

X650 B

K

L2-N

X650 B

K

L1-B

X650 B

N

#1 #2

#2#1 #1 #2

L1-B

X650 B

N

L1-B

X650 B

N

L1-B

X650 B

N

#3 #4 #3

SW2

OT40FT3

TEST

L2-N

X650 B

K

TERMINALCHAMBER

TERMINALCHAMBER


FSP01/02 Switchgear Assembly - Type 20


� RSP Part No. DLLF2P20-02.

� Class II Distribution Enclosure for 650V Signalling Systems.





� Two Switched and Fused Output Functional Supplies.

� Functional Supply Fuse Carriers IEC60269 (ABB 10x38mm).



� Weight = 13.5Kg.

FSP01/02 - Type 20

Power



FSP01/02 - Type 20

Power

2

3

4

51

6

4

51

2

3

6 2

3

4

51

6 2

3

4

51

6

2

3

4

51

6

T6T5

T

B

T8T7

T

B

T

B

T

B

T

B

T3 T4T1 T2

T

B

T11T10 T12T9

NO

ABB40-660

L N

C NC PTSU

458

FSP02 TYPE 20

INDICATION

CARRIER

BELDON 9302

OUTGOINGFUNCTIONALCIRCUITSUPPLY 1

CIRCUIT

FUTURE ALARM

ISOLATOR

SUPPLY 2

FUNCTIONAL

TEST

ABB

NO NC

#1

ISOLATOR

POINTPOINT

INCOMING

TEST

ISOLATOR

SUPPLY 3




CARRIER

E91/32

CARRIER

L1-B

X6

50

BN

L2-N

X6

50

BK

L1-B

X6

50

BN

L1-B

X6

50

BN

L1-B

X6

50

BN

L1-B

X6

50

BN

L1 - BX650

L2 - NX650

#5 #5

FUSEABB

FUSEABB

#6 #6

FUSE

ABB ABB

MAX SIZE 120mm²

#1 #2

#3 #4 #3 #4 #3

OT80FT3

ABBE91/32

SWB

OT40FT3ABB

S

#2

INCOMING WIRES

OT80FT3

E91/32

SUPPLYINCOMING

MAINSW1

SUPPLY 1CIRCUIT

FUNCTIONALSWA

SUPPLY 2

SWC

SUPPLYCIRCUIT

FUNCTIONALOUTGOING

MAX SIZE 120mm²

L1-B

X6

50

BN

L1-B

X6

50

BN

L1-B

X6

50

BN

#3 #4 #3 #3

16mm COPPER BUSBAR

FUNCTIONALCIRCUIT

PS3/60/16

#4 #4

INCOMING WIRES

MAIN

POINTTESTSW1

POINTTESTSW2

ISOLATOR

OT40FT3

ISOLATOR

L2-N

X6

50

BK

L2-N

X6

50

BK

L2-N

X6

50

BK

L2-N

X6

50

BK

L2-N

X6

50

BK

L2-N

X6

50

BK

L2-N

X6

50

BK

#1 #2 #1 #2

B

T T

B

T

B

T

B

T

B

T

B

T

B

T

B

C

SW2

OT40FT3ABB

#4

TERMINALCHAMBER

TERMINALCHAMBER

DIMENSIONINGWIRING DIAGRAM

506

400

220 400

400

233

INTERNAL VIEW









� Three Switched & Fused Output Functional Supplies .





FSP01/02 - Type 21



FSP01/02 - Type 21

4

51

2

3

6

4

51

2

3

6 4

51

2

3

6 4

51

2

3

6

4

51

2

3

6

T6T5

T

B

T8T7

T

B

T

B

T9

T

B

T

B

T10 T3 T4T1 T2

T

B

458

FSP02 Type 21WIRING DIAGRAM

INTERNAL VIEW

SWC

CIRCUIT

OUTGOINGFUNCTIONALCIRCUITSUPPLY 1

CIRCUITSUPPLY 2

FUNCTIONAL

SW2

FUNCTIONAL

SWB

TEST

SUPPLY 3

TESTPOINT

INCOMING

B

T T

B

T

B

T

B

T

B

T

B

T

B

T

B

T

B

T

POINT

SWA

POINT

TEST

B

SW1

POINT

SW1 SW2TEST

DIMENSIONING

TERMINALCHAMBER

TERMINALCHAMBER

233

400

506

220

400

400






� Labelled for use in 240V systems.




� Three Switched & Fused Output Functional Supplies.





FSP01/02 - Type 22



FSP01/02 - Type 22

2

3

4

51

6

2

3

4

51

6 2

3

4

51

6

3

4

51

2 6

2

3

4

51

6

T6T5

T

B

f2

T8T7

T

B

f3 T

B

f4

T9

T

B

f5 T

B

f6

T10 T3 T4T1 T2

T

B

f1

458

FSP02 TYPE 22 WIRING DIAGRAM DIMENSIONING

INTERNAL VIEW

T

SUPPLY

OUTGOINGFUNCTIONALCIRCUIT CIRCUIT

SUPPLY 2

FUNCTIONAL FUNCTIONALCIRCUIT

B

PS3/60/16

SUPPLY 3

TESTPOINT POINT

T

B

SUPPLY 3

ISOLATOR

TEST

INCOMING





E91/32

CARRIER

L1-B

X2

40

BN

N1

-NX

24

0 B

U

L1-B

X2

40

BN

L1-B

X2

40

BN

L1-B

X2

40

BN

L1-B

X2

40

BN

L1 - BX240

N1 - NX240

#5 #5

#6

ABBFUSE

ABBFUSE

#6

OT80FT3ABB ABB

MAX SIZE 120mm²

#1 #2 #3 #4 #3 #4 #3 #5 #1

ISOLATORISOLATOR

CARRIER

E91/32

OT80FT3

INCOMING WIRES

#2

SW1MAIN

INCOMINGSUPPLY

SWAFUNCTIONAL

CIRCUITSUPPLY 1

SWBFUNCTIONAL

CIRCUITSUPPLY 2

SWC

OUTGOING

16mm COPPER BUSBAR

FUNCTIONAL

ABB

MAX SIZE 120mm²

L1-B

X2

40

BN

L1-B

X2

40

BN

L1-B

X2

40

BN

#3 #4 #3 #3#4

B

CIRCUITMAIN

INCOMING WIRES

#4

SW1TEST

POINT

SW2TEST

POINT

OT40FT3ABB

ISOLATOR

OT40FT3

ISOLATOR

N1

-NX

24

0 B

U

N1

-NX

24

0 B

U

N1

-NX

24

0 B

U

N1

-NX

24

0 B

U

N1

-NX

24

0 B

U

N1

-NX

24

0 B

U

N1

-NX

24

0 B

U

#1 #2 #1 #2

B

T T

B

T

B

T

B

T

B

T

B

T

B

T

SW2

OT40FT3ABB

SUPPLY 1

TERMINALCHAMBER

TERMINALCHAMBER

400

220

506

400

233

400


FSP03 Assemblies FSP03 PRODUCTS

FSP0

3Type 3

2D

LLF3P

32

-02

FSP0

3

Type 32

CD

LLF3P

32

C

FSP0

3

Type 30

DLLF3

P3

0-0

2

FSP0

3

Type 31

DLLF3

P3

1-0

2

FSP0

3Type 3

3D

LLF3P

33

-02

FSP0

3

Type 34

DLLF3

P3

4-0

2

FSP0

3

Type 35

DLLF3

P3

5-0

2

FSP0

3Type 3

6D

LLF3P

36

-02

FSP0

3Type 3

7D

LLF3P

37

-02

FSP0

3 Type 3

2Surge Suppressor M

oduleD

LLF3P

32

SM

Class II II II II II II II II II II

Feeder Switches2 – Mains3 - ARS

2 – Mains3 - ARS

2 – Mains3 - ARS

N/A N/A N/A N/A N/A N/A N/A

Functional Supplies

Dependant on functionalFSP03 Module selected

2 4 4 2 2 2 4 N/A

Feeder Cable Size (Cu or Al)

16-120mm² 16-120mm² 16-120mm² N/A N/A N/A N/A N/A N/A N/A

Type of Fuses IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC

Dimensions (mm)Full Width

CaseHalf Width

Case

W=506H=800D=233

W=506H=800D=228

W=506H=800D=228

W=506H=800D=228

W=506H=800D=228

W=506H=400D=233

W=506H=400D=228

W=100H=150D=99

Weight 18.75Kg 18.75Kg 18.75Kg 18.75Kg 18.75Kg 13.50Kg 13.50Kg 1Kg

Railway Cat No. 054/213905 054/213906 054/213907 054/213908 054/213909 054/213910 054/213911 054/213912 054/213913 054/213914

Additional Comments

Optional Heater and Light available

Optional Heater and Light available

Primary and Secondary

fuses

Primary and Secondary

fuses

Including termination

facility for one spur supply

A single surge suppressor in its

own housing

• NetworkRailProductAcceptanceCertificatePA05/07053.• ComplianttoNR/L2/SIG/ELP/27409Issue2.• AllFSP03scomefittedwithRSP’suniqueremovableandsplit-ableglandplates.

FSP03• AllFSP03casesarefullycompatiblewithallNWRProductAcceptedAutomatic ReconfigurationSystemsandcanbesuppliedinyellowbandedcasesmade frommildorstainlesssteel.

Power


FSP03 Switchgear Assembly - Type 30




� FSP03 Main Distribution Module.









FSP03 - Type 30

Power



FSP03 - Type 30

Power

2

3

4

51

6 2

3

4

51

6 2

3

4

51

6 2

3

4

51

6 2

3

4

51

6

2

3

4

51

6 2

3

4

51

6 B

E91/32ABBFUSE

T

CARRIER

f2

B

E91/32ABBFUSE

f1 T

CARRIER

T4T3T1 T2

458

FSP03 TYPE 30

233

800

WIRING DIAGRAM

INTERNAL VIEW

DIMENSIONING

220

180

400

800

506

220

BX

65

0 B

NL1

SUPPLY

POINTS

INCOMING

L2-N

X6

50

BK

L1-B

X6

50

BN

#1

AUTO

NX

65

0 B

KL2

NO.1RECON

TEST

#2

AUTORECONSUPPLY

RECONSUPPLYNO.2

#3

NX

65

0 B

K

SUPPLYNO.1

DISTRIBUTIONSUPPLY

#3

BYPASS

LOCAL

SUPPLY

POINTS

T7

T5 T6 T9

NO.2

TEST

POINTS

OUTGOING

L2-N

X6

50

BK

L1-B

X6

50

BN

#1 #2

T14

T10

SUPPLY

BYPASS

BK

#4

TEST

T12

L2N

X6

50

#3L1 BK

#4

BX

65

0B

N L2BN

#4#3

#5 #6 #5

NX

65

0

#3L1

BK

#4

BX

65

0

#6

L2N

X6

50

#3L1

BK

#4

BX

65

0B

N

L2BN

S12S11

NX

65

0

BX

65

0

POINTS

#4#3 #4#3

T8

T11L1

-BX

65

0 B

N

L1-B

X6

50

BN

L1-B

X6

50

BN

L1-B

X6

50

BN

#3

L2

L2-N

X6

50

BK

L2-N

X6

50

BK

L2-N

X6

50

BK

L1-B

X6

50

BN

L2-N

X6

50

BK

T13

TEST

L2-N

X6

50

BK

TESTPOINTS

L2N

X6

50

BK

L1B

X6

50

BN AUTO

L1

L1B

X6

50

BN



� Railway Cat - No. 054/213908.

� RSP Part - No. DLLF3P31-02.


� FSP03 Functional Supply Module with Primary and Secondary fuses.

Key Features: � Four Switched & Fused Output Functional Supplies.







FSP03 - Type 31

Power



FSP03 - Type 31

Power

2

3

4

51

6 2

3

4

51

6 2

3

4

51

62

3

4

51

6

T1 T2

B

E91/32ABBFUSE

T

CARRIER

f2

B

E91/32ABBFUSE

f1 T

CARRIER

B

E91/32ABBFUSE

f3 T

CARRIER

B

E91/32ABBFUSE

f5 T

CARRIER

B

E91/32ABBFUSE

f7 T

CARRIER

B

E91/32ABBFUSE

f4 T

CARRIER

B

E91/32ABBFUSE

f6 T

CARRIER

B

E91/32ABBFUSE

f8 T

CARRIER

B

E91/32ABBFUSE

f9 T

CARRIER

B

E91/32ABBFUSE

f10 T

CARRIER

B

E91/32ABBFUSE

f11 T

CARRIER

B

E91/32ABBFUSE

f12 T

CARRIER

B

E91/32ABBFUSE

f13 T

CARRIER

B

E91/32ABBFUSE

f14 T

CARRIER

B

E91/32ABBFUSE

f15 T

CARRIER

B

E91/32ABBFUSE

f16 T

CARRIER

458

FSP03 Type 31

POINTS

T14

INCOMING

___ ___

T3 T4 T5 T6 T7 T8 T10T9L1

-BX

650 B

N

L2-N

X650 B

K

___

#2#1

#4#3 #4#3 #4#3 #4#3

#4#3 #4#3 #4#3 #4

TEST

SUPPLY 4

#3

FUNCTIONALSUPPLY 1

FUNCTIONALSUPPLY 2

FUNCTIONALSUPPLY 3

FUNCTIONALSUPPLY 4

FUNCTIONALSUPPLY 4

FUNCTIONALSUPPLY 3

FUNCTIONALSUPPLY 2

FUNCTIONALSUPPLY 1

POINTSTEST

FUNCTIONALSUPPLY 3

FUNCTIONALSUPPLY 2

POINTS

#3

FUNCTIONALSUPPLY 1

SW1FUNCTIONAL

SUPPLY 1

SW2FUNCTIONAL

SUPPLY 2

SW4

SUPPLY 3

T11 T12 T13

FUNCTIONAL

T15 T16 T17 T18

T19 T20 T21 T22 T23 T24 T25

FUNCTIONALSUPPLY 4

SW3FUNCTIONAL

T26

L1B

X11

0B

N L2N

X11

0B

K L1B

X11

0B

N L2N

X11

0B

K L1B

X11

0B

N L2N

X11

0B

K L1B

X11

0B

N L2N

X11

0B

K

L1B

X11

0B

N L2N

X11

0B

K L1B

X11

0B

N L2N

X11

0B

K L1B

X11

0B

N L2N

X11

0B

K L1B

X11

0B

N L2

BN

NX

11

0B

K

L1 BK

BX

65

0

#3 L2

BN

NX

65

0

#4

L1 BK

BX

65

0

#3 L2 BN

NX

65

0

#4 L1 BK

BX

65

0

#3 L2 BN

NX

65

0

#4 L1 BK

BX

65

0

#3 L2 BN

NX

65

0

#4 L1 BK

#4

___

BX

65

0

#3 L2

BN

NX

65

0

___

L1 BK

BX

65

0

#3 L2 BN

NX

65

0

#4 L1 BK

BX

65

0

#3 L2 BN

NX

65

0

#4 L1 BK

BX

65

0

NX

65

0

#4

TEST

L2

TESTPOINTS

WIRING DIAGRAM DIMESNIONS

INTERNAL VIEW

400

506

220

180

800

220

228

800


FSP03 Full Width Location Case Assembly




� Full Width Case - Optional Heater and Light available.

When ordering a complete case a Type 30 Distribution Module is supplied as standard as well as one other FSP03 Functional Supply Module which is to be specified by the client.







� Weight = Dependant on final design. Need a tailored design?Our IRSE licensed designers can give you the bespoke solution you need.Call us on 01752 969321 or you can fill out our online form

FSP03 - Type 32

Power


FSP03 Half Width Location Case Assembly


� RSP Part No. DLLF3P32C.


� Half Width Case - Optional Heater and Light available.

When ordering a complete case a Type 30 Distribution Module is supplied as standard as well as one other FSP03 Functional Supply Module which is to be specified by the client.







� Weight = Dependant on final design.

FSP03 - Type 32C

Power

Need a tailored design?Our IRSE licensed designers can give you the bespoke solution you need.Call us on 01752 969321 or you can fill out our online form



� Railway Cat - No. 054/213909.



� FSP03 Functional Supply Module.








FSP03 - Type 33

Power

Need a tailored design?Our IRSE licensed designers can give you the bespoke solution you need.Call us on 01752 969321 or you can fill out our online form


FSP03 - Type 33

Power

458

2

3

4

51

6 2

3

4

51

6 2

3

4

51

6

1

2

3

4

5

6

T1 T2 B

E91/32ABBFUSE

T

CARRIER

ABBFUSE

f1 T

B

E91/32

CARRIER

ABBFUSE

f3 T

B

E91/32

CARRIER

ABBFUSE

f5 T

B

E91/32

CARRIER

ABBFUSE

f7 T

B

E91/32

CARRIER

ABBFUSE

f4 T

B

E91/32

CARRIER

ABBFUSE

f6 T

B

E91/32

CARRIER

T

B

E91/32ABBFUSE

f8

CARRIER

FSP03 Type 33

228

800


INTERNAL VIEW

220

506

400

220

180

800

POINTS

FUNCTIONAL

INCOMINGL1

-BX

65

0 B

N

L2-N

X650

BK

___

L1-B

X65

0 B

N

L2-N

X650

BK

___

L1-B

X65

0 B

N

L2-N

X650

BK

#3

L1-B

X65

0 B

N

L2-N

X650

BK

___

T3 T4 T5 T6 T7 T8 T10T9

L1-B

X65

0 B

N

L2-N

X650

BK

L1-B

X65

0 B

N

L2-N

X650

BK

L1-B

X65

0 B

N

L2-N

X650

BK

L1-B

X65

0 B

N

L2-N

X650

BK

L1-B

X65

0 B

N

L2-N

X650

BK___

#2#1 #4#3 #4#3 #4

FUNCTIONAL

#4#3

#4#3 #4#3 #4#3 #4

TESTPOINTS

TEST

#3

SUPPLY 4FUNCTIONAL

SUPPLY 2FUNCTIONAL

SUPPLY 3

POINTS

SUPPLY 4

SUPPLY 1

___

SW1FUNCTIONAL

SUPPLY 1

SW2FUNCTIONAL

SUPPLY 2

SW4FUNCTIONALFUNCTIONAL

SUPPLY 3

TEST

SW3

TESTPOINTS



� Railway Cat - No. 054/213910.



� FSP03 Functional Supply Module with Primary and Secondary fuses.

Key Features: � Two Switched and Fused Output Functional Supplies.







FSP03 - Type 34

Power



FSP03 - Type 34

Power

2

3

4

51

6 2

3

4

51

6

T1 T2

B

E91/32ABBFUSE

T

CARRIER

B

E91/32ABBFUSE

f1 T

CARRIER

B

E91/32ABBFUSE

f3 T

CARRIER

B

E91/32ABBFUSE

f4 T

CARRIER

B

E91/32ABBFUSE

f5 T

CARRIER

B

E91/32ABBFUSE

f10 T

CARRIER

B

E91/32ABBFUSE

f11 T

CARRIER

B

E91/32ABBFUSE

f12 T

CARRIER

B

E91/32ABBFUSE

f6 T

CARRIER

B

E91/32ABBFUSE

f7 T

CARRIER

B

E91/32ABBFUSE

f8 T

CARRIER

B

E91/32ABBFUSE

f9 T

CARRIER

458

FSP03 TYPE 34

POINTSTEST

INCOMING

___

T3 T4 T5 T6

L1-B

X650 B

N

L2-N

X650 B

K

___

#2#1

#4#3 #4#3 #4#3 #4#3

#4#3 #4#3 #4#3 #4

TESTPOINTS

#3

FUNCTIONALSUPPLY 1

FUNCTIONALSUPPLY 2

FUNCTIONALSUPPLY 4

FUNCTIONALSUPPLY 3

FUNCTIONALSUPPLY 2

FUNCTIONALSUPPLY 1

FUNCTIONALSUPPLY 4

FUNCTIONALSUPPLY 3

FUNCTIONALSUPPLY 2

POINTS

#3

FUNCTIONALSUPPLY 1

SW1

SUPPLY 2

T10 T11 T12 T13 T14

T15 T16 T18 T19 T20

FUNCTIONALSUPPLY 1

SW2FUNCTIONAL

T21

L1B

X11

0B

N L2N

X11

0B

K L1B

X11

0B

N L2N

X11

0B

K L1B

X11

0B

N L2N

X11

0B

K L1B

X11

0B

N L2N

X11

0B

K

L1B

X11

0B

N L2N

X11

0B

K L1B

X11

0B

N L2N

X11

0B

K L1B

X11

0B

N L2N

X11

0B

K L1B

X11

0B

N L2

BN

NX

11

0B

K

L1 BK

BX

65

0

#3 L2

BN

NX

65

0

#4

L1 BK

BX

65

0

#3 L2 BN

NX

65

0

#4 L1 BK

#4

BX

65

0

#3 L2

BN

NX

65

0

___

L1 BK

#4

T7 T8 T9

T17

BX

65

0

NX

65

0

T22

TEST

L2

TESTPOINTS

WIRING DIAGRAM DIMENSIONING

INTERNAL VIEW

180

220

506

400

220

800

800

228



� Railway Cat - No. 054/213911.











FSP03 - Type 35

Power



FSP03 - Type 35

Power

1

2

3

4

5

6

1

2

3

4

5

6

T1 T2

T

B


ABBFUSE

f1 T

B

E91/32

CARRIER

T

B

E91/32ABBFUSE

f3

CARRIER

T

B

E91/32ABBFUSE

f4

CARRIER

458

FSP04 Type 35

#4

TEST

INCOMING

T3 T4 T5 T6

L1-B

X650 B

N

L2-N

X650 B

K

#2

NX

65

0

POINTS

#1

FUNCTIONALSUPPLY 2

BX

65

0

#3

FUNCTIONALSUPPLY 1

SW1FUNCTIONAL

SUPPLY 1

SW2

BN

FUNCTIONALSUPPLY 2

L1 BK

BX

65

0

#3 L2

BN

NX

65

0

#4

L1 BK

BX

65

0

#3 L2 BN

NX

65

0

#4 L1 BK

BX

65

0

#3 L2

BN

NX

65

0

#4

L1 BKL2

TESTPOINTS


INTERNAL VIEW

180

220

506

400

220

800

800

228



� Railway Cat - No. 054/213912.



� FSP03 Functional Supply Module including termination facility for one spur supply.








FSP03 - Type 36

Power



FSP03 - Type 36

Power

458 4

51

2

3

6 4

51

2

3

6

T1 T2

ABBFUSE

T

B

E91/32

CARRIER

f2E91/32ABBFUSE

f1 T

B

CARRIER

E91/32ABBFUSE

f3 T

B

CARRIER

E91/32ABBFUSE

f4 T

B

CARRIER

FSP03 Type 36 DIMENSIONINGWIRING DIAGAM

INTERNAL VIEW

400

233

400

220

506

400

BX

65

0

BK

POINTSTEST

SPUR

INCOMING

___

T3 T4 T5 T6

L1-B

X6

50

BN

L2#3

L2-N

X6

50

BK

NX

65

0

NX

65

0

___

#3 L2

SUPPLY

#2

#4

TESTPOINTS

#1

SUPPLY 1

SW1

BN

FUNCTIONAL

SUPPLY 1

L1 BK

FUNCTIONAL

#3 L2

BN

BX

65

0

#4

L1 BK

#4

NX

65

0

#3 L2 BN

BX

65

0

L1

BK

#4

BN

BX

65

0

___

L1

NX

65

0

SW2

SPURSUPPLY














FSP03 - Type 37

Power



FSP03 - Type 37

Power

458

1

2

3

4

5

6

1

2

3

4

5

6

1

2

3

4

5

6

1

2

3

4

5

6

T1 T2

T

B


f2

FUSE

f1 T

B

E91/32ABB

CARRIERFUSE

f3 T

B

E91/32ABB

CARRIERFUSE

f5 T

B

E91/32ABB

CARRIERFUSE

f7 T

B

E91/32ABB

CARRIERFUSE

f4 T

B

E91/32ABB

CARRIERFUSE

f6 T

B

E91/32ABB

CARRIERFUSE

f8 T

B

E91/32ABB

CARRIER

FSP03 Type 37

400

220

506

400


INTERNAL VIEW

POINTSTEST

INCOMING

L1-B

X65

0 B

N

L2-N

X650

BK

___

L1-B

X65

0 B

N

L2-N

X650

BK

___

L1-B

X65

0 B

N

L2-N

X650

BK

___

L1-B

X65

0 B

N

L2-N

X650

BK

___

T3 T4 T5 T6 T7 T8 T10T9

L1-B

X65

0 B

N

L2-N

X650

BK

L1-B

X65

0 B

N

L2-N

X650

BK

L1-B

X65

0 B

N

L2-N

X650

BK

L1-B

X65

0 B

N

L2-N

X650

BK

L1-B

X65

0 B

N

L2-N

X650

BK___

#2#1 #4#3 #4#3 #4#3 #4#3

#4#3 #4#3 #4#3 #4

TESTPOINTS

#3

FUNCTIONALSUPPLY 1

FUNCTIONALSUPPLY 2

FUNCTIONALSUPPLY 3

POINTS

SUPPLY 4

FUNCTIONALSUPPLY 4

SW1FUNCTIONAL

SUPPLY 1

SW2FUNCTIONAL

SUPPLY 2

SW4FUNCTIONALFUNCTIONAL

SUPPLY 3

TEST

SW3

TESTPOINTS

400

228


FSP03 Switchgear Assembly - Type 32SM


� RSP Part No. DLLF3P32SM.


� A single surge suppressor in its own housing.

Key Features: � Dedicated Surge Arrestor Module.




� Weight = 1Kg.


FSP03 - Type 32SM

Power



FSP03 - Type 32SM

Power

T

B

ABB2CSM200923R1801

f1

E91/32

B

ABB2CSM200923R1801

f2 T

E91/32

FSP03 Type 32 SM

INTERNAL VIEW

150

99

100

150

P TS

L1

14 11 12

L2

#1 #2

WIRING DIAGRAM

ABBOVR T240-660

DIMENSIONING


FSP04

Power

FSP0

4 Type 0

1D

LLF4P

01

FSP0

4 Type 0

2D

LLF4P

02

FSP0

4 Type 0

3D

LLF4P

03

D

LLF2P

20

-02

FSP0

4 Type 0

4D

LLF4P

04

D

LLF2P

21

-02

FSP0

4 Type 0

5D

LLF4P

05

D

LLF2P

22

-02

FSP0

4 Type 0

6D

LLF4P

06

FSP0

4 Type 0

7D

LLF4P

07

FSP0

4 Type 0

8D

LLF4P

08

FSP0

4 Type 0

9D

LLF4P

09

FSP0

4 Type 1

0D

LLF4P

10

Class II II II II II II II II II II

Feeder Switches 1 1 1 1 2 2 1 1 2 2

Functional Supplies 1 1 1 1 1 1 2 2 2 2

Feeder Cable Size

(Cu or Al)6-50mm² 6-50mm² 16-120mm² 16-120mm² 16-120mm² 16-120mm² 16-120mm² 16-120mm² 16-120mm² 16-120mm²

Type of Fuses IEC BS88 IEC BS88 IEC BS88 IEC BS88 IEC BS88

Dimensions (mm)W=300H=200D=224

W=300H=200D=224

W=300H=300D=224

W=300H=300D=224

W=300H=300D=224

W=300H=300D=224

W=400H=300D=221

W=400H=300D=221

W=400H=300D=221

W=400H=300D=221

Weight 5Kg 5Kg 6Kg 6Kg 6Kg 6Kg 7.5Kg 7.5Kg 7.5Kg 7.5Kg

Railway Cat No. 092/002324 092/002325 092/002326 092/002327 092/002328 092/002329 092/002330 092/002331 092/002332 092/002333

Additional CommentsFunctional

supplies share a common fuse

Functional supplies share a

common fuse

• NetworkRailProductAcceptanceCertificatePA05/07058.• ComplianttoNR/L2/SIGELP27409Issue2.• AllFSP04scomefittedwithRSP’suniqueremovableandsplit-ableglandplates.• SuitableforSIN119LegacyInstallationupgrades.




� RSP Part No. DLLF4P01.


Key Features: � Combined Ring Power IN/OUT Isolator.

� Compatible with Copper (Cu) or Aluminium (Al) Feeder Cables from 6-50mm².

� One Switched and Fused Output Functional Suppy.




� Weight = 5Kg.

SupportAll products come with a standard 12 month warranty with an option to extend if required and a minimum 35 year life expectancy. RSP has an experienced team on hand to provide ongoing support pre, during and after sales. Need a tailored design?

Our IRSE licensed designers can give you the bespoke solution you need.Call us on 01752 969321 or you can fill out our online form

FSP04 - Type 01


FSP04 - Type 01

Power

T6B

TT5

B

TT4

B

TT3

B

T

5

SWA

1

2

3

4 6

5

SW1

1

2

3

4 6

T1B

TT2

B

T

Lf1

R

Lf2

R

FSP04 Type 01

INTERNAL VIEW


200

260

300

110

200

200

224

POINTINCOMING

#3

#3

#3 #4

#4

#4

#1 #2#1 #2 #5 #6 #5

TESTSUPPLY

#6

OUTGOINGSUPPLYPOINT

INOUT

TEST FUNCTIONALCIRCUIT 1












� Weight = 5Kg.


FSP04 - Type 02

Power



FSP04 - Type 02

Power

T6

B

TT5

B

TT4

B

TT3

B

T

SWA

1

2

3

4

5

6

SW1

1

2

3

4

5

6

T1

B

TT2

B

T

f1 L

R

f2 L

R

FSP04 Type 02WIRING DIAGRAM DIMENSIONING

INTERNAL VIEW

200

260

300

110

200

224

200

POINTPOINT

#3

#3

#3 #4

#4

#4

#1 #2#1 #2 #5 #6 #5

TEST

OUT

#6

OUTGOINGSUPPLYSUPPLY

IN

INCOMING TEST FUNCTIONALCIRCUIT 1












� Weight = 6Kg.


FSP04 - Type 03

Power



FSP04 - Type 03

Power

T6B

TT5

B

TT4

B

TT3

B

T

2

3

4

5

SWA

1

62

3

4

5

SW1

1

6

T1B

TT2

B

T

f1 L

R

f2 L

R

FSP04 Type 03

POINT

#3

#3

POINT

#3 #4

#4

#4

#1 #2#1 #2 #5 #6 #5

TEST

OUT

#6


IN


225

300

190

300

260

300

200


INTERNAL VIEW












� Weight = 6Kg.


FSP04 - Type 04

Power



FSP04 - Type 04

Power

T6B

TT5

B

TT4

B

TT3

B

T

4

5

SWA

1

2

3

64

5

SW1

1

2

3

6

T1B

TT2

B

T

f1 L

R

f2 L

R

WIRING DIAGRAM DIMENSIONINGFSP04 Type 04

INTERNAL VIEW

POINTPOINT

#3

#1 #3 #4

#4

#4

#3

#2#1 #2 #5 #6 #5

TEST

OUT

#6


IN


200

190

300

260

300

225

300












� Weight = 6Kg.


FSP04 - Type 05

Power



FSP04 - Type 05

Power

2

3

4

5

SW2

1

6

1

2

3

4

5

SWA

62

3

4

5

SW1

1

6

T1B

T T2B

T T6B

TT5B

T

f1 L

R

f2 L

R

T4B

TT3B

T


INTERNAL VIEW

190

300

300

200

260

225

300

#4

#3

#1

#3

OUTGOINGSUPPLY

#3

#3 #4#2

INCOMINGCIRCUIT 1

#5

#4

IN

#6

OUT

#1

FUNCTIONALPOINT SUPPLY

#5

#2#6

TEST

TESTPOINT

#4












� Weight = 6Kg.


FSP04 - Type 06

Power



FSP04 - Type 06

Power

3

4

5

SW2

1

2 6

1

2

3

4

5

SWA

6

3

4

5

SW1

1

2 6

T1B

TT2

B

TT6

B

TT5

B

T

Lf1

R

Lf2

R

T4B

TT3

B

T


INTERNAL VIEW

INCOMING

#4

#1

#3#4

SUPPLY

#3

#3 #4#2

OUTGOINGCIRCUIT 1

#5

#3

IN

#6

OUT

#1

FUNCTIONALPOINT SUPPLY

#5

#2#6

TEST

TESTPOINT

#4

300

225

200

190

300

260

300








� Two Switched & Fused Output Functional Supplies.




� Weight = 7.5Kg.


FSP04 - Type 07

Power



FSP04 - Type 07

Power

T6B

TT5

B

T

Lf1

R

Lf2

R

3

4

5

SWB

1

2 6

5

SWA

1

2

3

4 6

5

SW1

1

2

3

4 6

T1B

TT2

B

TT4

B

TT3

B

TT8

B

TT7

B

T

Lf3

R

Lf4

R


INTERNAL VIEW

221

300

300

210

400

360

300

#4

TEST

#3

#3 #4

FUNCTIONAL

POINT

CIRCUIT 1

#5 #6

#1

#4

FUNCTIONALSUPPLY

#1#2

INCOMINGSUPPLY

#5 #6

#3

#3 #4#2

OUTGOINGCIRCUIT 2

#3

#4

#3

#4

IN

TESTPOINTOUT








� Two Switched & Fused Output Functional Supplies.




� Weight = 7.5Kg.


FSP04 - Type 08

Power



FSP04 - Type 08

Power

T6B

TT5

B

T

Lf1

R

f2 L

R

SWB

1

2

3

4

5

62

3

4

5

SWA

1

6

SW1

1

2

3

4

5

6

T1B

TT2

B

TT4

B

TT3

B

TT8

B

TT7

B

T

f3 L

R

f4 L

R


INTERNAL VIEW

300

210

400

360

300

300

221

#3

#5

#3

OUTGOING

#4

#4

#4

CIRCUIT 1

#1

#6

FUNCTIONAL FUNCTIONAL

#4

SUPPLY

#1

SUPPLYINCOMING

#2 #5 #6

#3

#3 #4#2

POINT

CIRCUIT 2

#3

#4

#3

TEST

IN

TESTPOINTOUT






� Functional supplies share a common fuse.



� Two Switched Output Functional Supplies sharing a common fuse.




� Weight = 7.5Kg.


FSP04 - Type 09

Power



FSP04 - Type 09

Power

1

2

3

4

5

SWB

6

1

2

3

4

5

SWA

6

1

2

3

4

5

SW1

6

T2B

TT1

B

TT4

B

TT3

B

TT6

B

TT5

B

T

Lf1

R

Lf2

R

Lf3

R

Lf4

R

T9B

T

T8B

TT7

B

T

T10B

T


INTERNAL VIEW

300

221

300

210

400

360

300

SUPPLY

#2#1

SECONDARY

#4

SUPPLY

#3

#3 #4#2

POINTSUPPLY

#1 #4

#3

#3

INCOMINGTEST

OUTGOING

#4

#5 #6

PRIMARYCIRCUITSUPPLY 2

SUPPLYFUNCTIONAL

IN

#5 #6

TESTPOINTOUT






� Functional supplies share a common fuse.



� Two Switched Output Functional Supplies sharing a common fuse.




� Weight = 7.5Kg.


FSP04 - Type 10

Power



FSP04 - Type 10

Power

2

3

4

5

SWB

1

64

5

SWA

1

2

3

64

5

SW1

1

2

3

6

T2B

TT1

B

TT4

B

TT3

B

TT6

B

TT5

B

T

f1 L

R

f2 L

R

f3 L

R

f4 L

R

T9B

T

T8B

TT7

B

T

T10B

T


INTERNAL VIEW

300

300

400

360

210

300

221

186

SUPPLY

OUTGOING

#1

SECONDARY

#4

SUPPLY

#3

#3 #4#2

INCOMINGSUPPLY

#1 #2

#3

#3 #4

#4

POINTTEST

#5 #6

PRIMARYCIRCUITSUPPLY 2

SUPPLYFUNCTIONAL

IN

#5 #6

TESTPOINTOUT

TC04Power


Terminal Chambers• NetworkRailProductAcceptanceCertificatePA05/07058.• SuitableforSIN119LegacyInstallationupgrades.

2 Core Cable - Terminal Chambers 4 Core Cable - Terminal Chambers

TC04

Type 20

DLLT4

P2

0

TC04

Type 21

DLLT4

P2

1

TC04

Type 22

DLLT4

P2

1

TC04

Type 23

DLLT4

P2

3

TC04

Type 24

DLLT4

P2

4

TC04

Type 25

DLLT4

P2

5

TC04

Type 26

DLLT4

P2

6

TC04

Type 27

DLLT4

P2

7

TC04

Type 28

DLLT4

P2

8

TC04

Type 29

DLLT4

P2

9

TC04

Type 30

DLLT4

P3

0

TC04

Type 31

DLLT4

P3

1

Class II II II II II II II II II II II II

No of Terminals 2 2 2 2 2 2 4 4 4 4 4 4

Type of Terminals Screw Screw Lug Screw Screw Lug Screw Screw Lug Screw Screw Lug


6-50mm² 16-120mm² 16-120mm² 6-50mm² 16-120mm² 16-120mm² 6-50mm² 16-120mm² 16-120mm² 6-50mm² 16-120mm² 16-120mm²


W=300H=200D=187

W=300H=200D=132

W=300H=300D=133

W=300H=300D=188

W=300H=300D=133

W=300H=200D=132

W=300H=200D=187

W=300H=200D=132

W=300H=300D=133

W=300H=300D=188

W=300H=300D=133

Weight 4.5Kg 4.5Kg 4.5Kg 5.5Kg 5.5Kg 5.5Kg 4.5Kg 4.5Kg 4.5Kg 5.5Kg 5.5Kg 5.5Kg

Railway Cat No. 092/002334 092/002335 092/002336 092/002337 092/002338 092/002339 092/002340 092/002341 092/002342 092/002343 092/002344 092/002345

Additional Comments


Terminal Chambers

2 x 2 Core Cables – Segregated Terminal Chambers 2 x 2 Core Cables with Brass Plate for Terminating Shield/Earth

TC04 Type 32DLLT4P32





Class II II II II II

No of Terminals 4 4 4 1 2

Type of Terminals Screw Screw Lug Brass Plate Brass Plates


6-50mm² 16-120mm² 16-120mm² 50-120mm² 50-120mm²


W=300H=300D=188

W=300H=300D=133

W=300H=200D=132

W=500H=200D=132

Weight 5.5Kg 5.5Kg 5.5Kg 4.5Kg 9Kg

Railway Cat No. 092/002346 092/002347 092/002348 092/002349 092/002350

Additional Comments


2 Core Cable Terminal Chambers - Type 20


� RSP Part No. DLLT4P20.

� Class II 650V Cable Terminal Chambers compatible with RSP Switchgear Assemblies.

Key Features: � Two Screw Type Terminals.




� Weight = 4.5Kg.


Need a tailored design? Our IRSE licensed designers can give you the bespoke solution you need.Call us on 01752 969321 or you can fill out our online form

TC04 - Type 20

Power


TC04 - Type 20

Power

CONFIGURATION DIMENSIONINGTC04 Type 20

INTERNAL VIEW

200

200

300

260

110

200

132










� Weight = 4.5Kg.


TC04 - Type 21

Power



TC04 - Type 21

Power

DIMENSIONINGTC04 Type 21

CONFIGURATION

INTERNAL VIEW 187

200

200

300

260

110

200






Key Features: � Two Lug Type Terminals.




� Weight = 4.5Kg.


TC04 - Type 22

Power



TC04 - Type 22

Power


INTERNAL VIEW

200

110

300

260

200

200

132










� Weight = 5.5Kg.


TC04 - Type 23

Power



TC04 - Type 23

Power


INTERNAL VIEW

200

190

300

260

300

133

300










� Weight = 5.5Kg.


TC04 - Type 24

Power



TC04 - Type 24

Power


INTERNAL VIEW

200

190

300

260

300

300

188






Key Features: � Two Lugs Type Terminals.




� Weight = 5.5Kg.


TC04 - Type 25

Power



TC04 - Type 25

Power


INTERNAL VIEW

200

190

300

260

300

300

133






Key Features: � Four Screw Type Terminals.




� Weight = 4.5Kg.


TC04 - Type 26

Power



TC04 - Type 26

Power


INTERNAL VIEW

200

110

300

260

200

200

132










� Weight = 4.5Kg.


TC04 - Type 27

Power



TC04 - Type 27

Power


INTERNAL VIEW

200

187

200

110

260

300

200






Key Features: � Four Lug Type Terminals.




� Weight = 4.5Kg.


TC04 - Type 28

Power



TC04 - Type 28

Power


INTERNAL VIEW

300

110

200

260

200

200

132










� Weight = 5.5Kg.


TC04 - Type 29

Power



TC04 - Type 29

Power


INTERNAL VIEW

190

200

260

300

300

300

133










� Weight = 5.5Kg.


TC04 - Type 30

Power



TC04 - Type 30

Power


INTERNAL VIEW

300

188

200

190

260

300

300










� Weight = 5.5Kg.


TC04 - Type 31

Power



TC04 - Type 31

Power


INTERNAL VIEW

300

190

200

260

300

300

133










� Weight = 5.5Kg.


TC04 - Type 32

Power



TC04 - Type 32

Power


INTERNAL VIEW

200

190

300

260

300

300

133










� Weight = 5.5Kg.


TC04 - Type 33

Power



TC04 - Type 33

Power


INTERNAL VIEW

300

188

200

190

300

260

300










� Weight = 5.5Kg.


TC04 - Type 34

Power



TC04 - Type 34

Power


INTERNAL VIEW

300

133

200

190

300

260

300






Key Features: � One Brass Plate Type Terminal.




� Weight = 4.5Kg.


TC04 - Type 40

Power



TC04 - Type 40

Power

DIMENSIONINGTC04 Type 40

CONFIGURATION

INTERNAL VIEW

200

200

260

300

110

200

132






Key Features: � Two Brass Plate Type Terminals.




� Weight = 9Kg.


TC04 - Type 41

Power



TC04 - Type 41

Power


INTERNAL VIEW

400

200

460

500

110

200

132

RSP Principal and Auxiliary Supply Points Power


PSP/ASP

Available in standard Network Rail sizes from type 1 to 9 or made to your bespoke dimensions. RSP can provide REB style buildings to create modular, compact and mini PSP/ASP solutions to meet any requirements.



� Available in a range of RAL colours including standard Green and Grey railway options.

� Built and tested to BS EN61439 and BS7671 using industry leading materials and switchgear and with a fully documented client focussed Factory Acceptance Test.

� Available with re-enforced flooring to enable both generator and UPS installation.

� Full range of options available including: additional internal walls, removable side walls, floor re-enforcement, bespoke lighting arrangements, forced air ventilation or air conditioning as required, intruder and fire alarms.


Power

DNO CubiclesPower


DNO Cubicles

Choose from one of our standard size and layout solutions or allow us to design and build a bespoke solution to suit your needs. Our DNO cubicles come in both single phase 230V and 3 Phase 400V versions.

Key Features: � Supplied complete with full detailed design and O&M manuals in accordance

with NR/L2/SIG/ELP/27417 for ease of handover and entry into service.

� Fully built and tested in accordance with BS EN 61439 with a fully documented client focussed Factory Acceptance Test.

� Available in either GRP, mild or stainless steel enclosures.

� Using industry leading materials and switchgear.


Power

Points Heating Control CubiclesPower


Points Heating Control Cubicles

Choose from one of our standard size and layout solutions or allow us to design and build a bespoke solution to suit your needs. Our Points Heating Control Cubicles are available in Single or 3 Phase versions capable of feeding up to 8 Point ends.



� Fully built and tested in accordance with BS EN 61439 with a fully documented client led Factory Acceptance Test provided.




Power

Level Crossing Lighting Control Unit / Cubicles (LCU / LCC)

Power


LCU / LCC

Choose from one of our standard size and layout solutions for Lighting Control Cubicles (LCC) or allow us to design and build a bespoke solution to suit your needs.

Don’t need an entire cubicle? RSP can also supply a factory built and fully tested Lighting Control and Override Unit (LCU) to retrofit inside an existing housing at a fraction of the cost of an entire cubicle - quote RSP Part Number DLLLCU01.



� Fully built and tested in accordance with BS EN 61439 with a fully documented client led Factory Acceptance Test provided.




Power

RSP Rail | 01752 969321 | [email protected]

Call: 01752 969321

Email: [email protected]

Visit: www.rsprail.co.uk

17 Moorlands Lane Saltash, Cornwall PL12 4HJ

Rail Signalling and Power Product and Services Catalogue

Documents

Transcript of Rail Signalling and Power Product and Services Catalogue