RACING SERVICE€¦ · Design and development · Product design · Vehicle Design · Graphic Design...

3
RACING SERVICE Motociclismo

Transcript of RACING SERVICE€¦ · Design and development · Product design · Vehicle Design · Graphic Design...

Page 1: RACING SERVICE€¦ · Design and development · Product design · Vehicle Design · Graphic Design · Technical Development GP y CEV CONTACT: jgatell@monlau-competicion.com. Created

RACING SERVICEMotociclismo

Page 2: RACING SERVICE€¦ · Design and development · Product design · Vehicle Design · Graphic Design · Technical Development GP y CEV CONTACT: jgatell@monlau-competicion.com. Created

SERVICIO A PROFESIONALES

MONLAU ENGINE DEVELOPMENT

GP y CEV

MONLAU DYNO TESTING

MONLAU ENGINEERING

Mantenimiento y preparación de motores según especificaciones y reglamentos.

Dilatada experiencia en la prepa-ración de los motores de nuestros equipos FIM Moto2/Moto3 y CEV Moto3.

Se realizan preparaciones para todo tipo de campeonatos: EXTREME, SUPERSPORT, SUPERMOTARD, MOTOCROSS, PRE-MOTO3, 24 HORAS.

Cada preparación puede adaptarse a las necesidades del cliente.

Se ofrecen servicios de ajuste y desarrollo con nuestro banco de potencia con frenó-metro. Posibilidad de hacer rodaje de motores para evitar ir al circuito así como riesgos innecesarios.

Chassis Program

Consultoría técnica ·Optimización de productos ·Estudios de fatiga ·Estudios de aerodinámica

Diseño y desarrollo ·Diseño de productos ·Diseño de vehículos ·Diseño gráfico ·Desarrollo técnico

CONTACTO: [email protected]

Page 3: RACING SERVICE€¦ · Design and development · Product design · Vehicle Design · Graphic Design · Technical Development GP y CEV CONTACT: jgatell@monlau-competicion.com. Created

SERVICE TO PROFESSIONALS

MONLAU ENGINE DEVELOPMENT

MONLAU DYNO TESTING

MONLAU ENGINEERING

Maintenance and preparation of engines according to specifications and regulations.

Extensive experience preparing engi-nes of our teams FIM Moto2/Moto3 and CEV Moto3.

Preparations for all championships are performed: EXTREME, SUPERS-PORT, Supermotard, MOTOCROSS, PRE-MOTO3, 24 HOURS.

Each preparation can be adapted to customer requirements.

Adjustment and development services on our dyno with brake tester. Possibility of engine running to avoid going to the circuit and unnecessary risks.

Chassis Program

technical Consultancy     · Product Optimization     · Studies of fatigue     · Aerodynamic studies

Design and development     · Product design     · Vehicle Design     · Graphic Design     · Technical Development

GP y CEV

CONTACT: [email protected]